Test Adapter NSPanel-lovelace-ui v0.17.x

TT-Tom

zeige mal bitte einen Screenshot von der Einstellung der PageTrash im Admin

deine alte Abfall-Seite im Script kannst du erstmal deaktivieren, in dem du sie hier aus kommentierst und dann das Script starten

pages: [
           main,
           //start2,
           //abfallseite,
       ],
       // Unterseiten / Subpages
       subPages: [
           bad_thermo,
           //wz_thermo,
           //chartline,
       ],

lobomau

@TT-Tom ok, auskommentieren zeigt die korrekte Wirkung.

PageTrash im Admin:

Meine Versionen:

ticaki

Da ist ein "Fehler" in der Navigationszuweisung, mal sehen wie man den am besten behebt. (hatt TT-Tom gefunden)

TT-Tom

@ticaki
@lobomau

Du hast zwar das Panel ausgewählt, aber keine Navigation heißt welche Seite davor und danach.

ticaki

0.17.4 (2026-04-16)

(ticaki) The admin navigation has been assembled incorrectly.
(ticaki) Improved selection of custom button IDs
(tt-tom17) fixed: ChannelConfigDialog bottom cut off on small laptop screens (save/color buttons not reachable)

zusätzlich haben wir noch Navigation Flow aus dem expert genommen, der wird jetzt immer angezeigt und die Systemseiten sind per default ausgeblendet.

MichaelF

Hi, habe den Adapter installiert und ein Panel erfolgreich angemeldet.

Probleme hab ich mit dem Wetter und einer weiteren Fehlermeldung:


admin.0
2026-04-18 20:55:01.145	warn	nspanel-lovelace-ui has an invalid jsonConfig: [{"instancePath":"/items/pagePower/items/pagePowerdata/items/6","schemaPath":"#/additionalProperties","keyword":"additionalProperties","params":{"additionalProperty":"attr"},"message":"must NOT have additional properties"},{"instancePath":"/items/pagePower/items/pagePowerdata/items/6","schemaPath":"#/items/allOf/18/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"/items/pagePower/items/pagePowerdata","schemaPath":"#/patternProperties/%5E.%2B/allOf/57/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"/items/pagePower","schemaPath":"#/properties/items/patternProperties/%5E.%2B/allOf/11/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"","schemaPath":"#/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"}]

admin.0
2026-04-18 20:53:28.180	warn	nspanel-lovelace-ui has an invalid jsonConfig: [{"instancePath":"/items/pagePower/items/pagePowerdata/items/6","schemaPath":"#/additionalProperties","keyword":"additionalProperties","params":{"additionalProperty":"attr"},"message":"must NOT have additional properties"},{"instancePath":"/items/pagePower/items/pagePowerdata/items/6","schemaPath":"#/items/allOf/18/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"/items/pagePower/items/pagePowerdata","schemaPath":"#/patternProperties/%5E.%2B/allOf/57/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"/items/pagePower","schemaPath":"#/properties/items/patternProperties/%5E.%2B/allOf/11/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"","schemaPath":"#/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"}]

nspanel-lovelace-ui.0
2026-04-18 20:52:01.455	info	[NsPanelWohnzimmer] Panel startup finished!

nspanel-lovelace-ui.0
2026-04-18 20:52:00.890	info	[NsPanelWohnzimmer] is online!

nspanel-lovelace-ui.0
2026-04-18 20:51:59.351	info	[controller] 1 Panels initialized

nspanel-lovelace-ui.0
2026-04-18 20:51:56.835	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.currently./ dpinit is object

nspanel-lovelace-ui.0
2026-04-18 20:51:56.832	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.currently./ dpinit is object

nspanel-lovelace-ui.0
2026-04-18 20:51:56.801	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.currently./ dpinit is object

nspanel-lovelace-ui.0
2026-04-18 20:51:56.772	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.daily\.00.+/ dpinit is object

nspanel-lovelace-ui.0
2026-04-18 20:51:56.769	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.daily\.00.+/ dpinit is object

nspanel-lovelace-ui.0
2026-04-18 20:51:56.766	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.daily\.00.+/ dpinit is object

nspanel-lovelace-ui.0
2026-04-18 20:51:56.730	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.currently\./ dpinit is object

nspanel-lovelace-ui.0
2026-04-18 20:51:56.729	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.currently\./ dpinit is object

nspanel-lovelace-ui.0
2026-04-18 20:51:56.723	warn	[StatesDB] Dont finds states for /^pirate-weather\.0\.weather\.currently\./ dpinit is object

Wetter ist hier eingetragen:

Version ist die 17.4

Im script:

sync function configuration (): Promise<void> {

    const overrideConfig: Partial<ScriptConfig.Config> = {
        // hier kann man die Werte von unten überschreiben bzw nicht ewig im Skript suchen wo nochmal die Farbe steht :)
        // pages und subpages geht hier nicht, weil die Seiten ja erst später angelegt werden. Bei const gehts nach Reihenfolge.
        // panelTopic: 'nspanel/ns_panel4',
        weatherEntity: 'pirate-weather.0.',
        defaultOffColor: Off,
        defaultOnColor: On,

        // weatherAddDefaultItems:
        // - true  => alle Standard-Wetterelemente hinzufügen
        // - false => keine hinzufügen
        // - { ... } => selektiv per Schlüssel aktivieren:
        //   sunriseSet, forecastDay1, forecastDay2, forecastDay3, forecastDay4, forecastDay5, forecastDay6,
        //   windSpeed, windGust, windDirection, uvIndex, solar
        // Hinweis: Die einzelnen Schlüssel funktionieren nur, wenn der gewählte Wetteranbieter
        // die entsprechenden Daten liefert und diese im Adapter vorbereitet wurden
        "weatherAddDefaultItems": false

    }

ticaki

Das Skript soll auch als Beispiel dienen um zu zeigen wie man was macht. Die Einstellung im Admin treffen nur zu wenn im Skript nichts ist das sie überschreibt:

Standard im Skript ist:

z.B.

favoritScreensaverEntity: [
            {
                type: 'template',
                template: 'text.pirate-weather.favorit',
                dpInit: `/^pirate-weather\\.0\\.weather\\.currently\\./`,
                modeScr: 'favorit',
            }
        ],

Mache daraus:
´´´
favoritScreensaverEntity: [],
´´´

Das selbe gilt für:

bottomScreensaverEntity: [],

@tt-tom
sollen wir das alles auskommentieren im Script und als reines Beispiel drin lassen?

MichaelF

Dass hat geklappt, Danke :-)

Musste aber auch den Adapter neu starten:

admin.0
2026-04-18 21:17:00.479	info	<== Disconnect system.user.admin from ::ffff:192.168.178.52 javascript

admin.0
2026-04-18 21:17:00.479	info	<== Disconnect system.user.admin from ::ffff:192.168.178.52 javascript

nspanel-lovelace-ui.0
2026-04-18 21:16:57.415	info	[controller] Panel NsPanelWohnzimmer removed!

nspanel-lovelace-ui.0
2026-04-18 21:16:57.283	warn	[NsPanelWohnzimmer] is offline!

nspanel-lovelace-ui.0
2026-04-18 21:16:57.283	info	[NsPanelWohnzimmer] Goint offline because delete panel!

nspanel-lovelace-ui.0
2026-04-18 21:16:57.282	error	[NsPanelWohnzimmer] Model missmatch! Config model is eu but panel send us-p. Check your config!

nspanel-lovelace-ui.0
2026-04-18 21:16:57.282	info	[NsPanelWohnzimmer] is online!

javascript.0
2026-04-18 21:16:56.953	info	script.js.nspanel-lovelace-ui_0.NsPanelWohnzimmer: Stopping script

javascript.0
2026-04-18 21:16:56.708	info	script.js.nspanel-lovelace-ui_0.NsPanelWohnzimmer: [ 'Panel for Topic: NsPanelWohnzimmer name: NsPanelWohnzimmer Script version 0.20.1 is correct!', 'done', '✅ Panel "08_D1_F9_A4_ED_44" reloaded with updated configuration.']

nspanel-lovelace-ui.0
2026-04-18 21:16:56.706	info	✅ Panel "08_D1_F9_A4_ED_44" reloaded with updated configuration.

ticaki

keine ahnung wo das hier "[NsPanelWohnzimmer] Model missmatch! Config model is eu but panel send us-p. Check your config!
" herkommt - das sollte da nicht stehen wenns shcon mal lief

MichaelF

kann ich das aus dem alten script einfach in den neuen Kopieren ?

/***********************************************************************
     **                                                                   **
     **                    Screensaver Configuration                      **
     **                                                                   **
     ***********************************************************************/
    leftScreensaverEntity: [
        // Examples for Advanced-Screensaver: https://github.com/joBr99/nspanel-lovelace-ui/wiki/ioBroker-Config-Screensaver#entity-status-icons-ab-v400 
    ],

    bottomScreensaverEntity: [
        // bottomScreensaverEntity 1
        {
            ScreensaverEntity: 'brightsky.0.daily.00.sunrise',
            ScreensaverEntityFactor: 1,
            ScreensaverEntityDecimalPlaces: 0,
            ScreensaverEntityDateFormat: {hour: '2-digit', minute: '2-digit'}, // Description at Wiki-Pages
            ScreensaverEntityIconOn: 'weather-sunset-up',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: 'Sonne',
            ScreensaverEntityUnitText: '%',
            ScreensaverEntityIconColor: MSYellow //{'val_min': 0, 'val_max': 100}
        },
        // bottomScreensaverEntity 2
        {
            ScreensaverEntity: 'sainlogic.0.weather.current.windspeed',
            ScreensaverEntityFactor: (1000 / 3600),
            ScreensaverEntityDecimalPlaces: 1,
            ScreensaverEntityIconOn: 'weather-windy',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: "Wind",
            ScreensaverEntityUnitText: 'm/s',
            ScreensaverEntityIconColor: {'val_min': 0, 'val_max': 120}
        },
        // bottomScreensaverEntity 3
        {
            ScreensaverEntity: 'sainlogic.0.weather.current.windgustspeed',
            ScreensaverEntityFactor: (1000 / 3600),
            ScreensaverEntityDecimalPlaces: 1,
            ScreensaverEntityIconOn: 'weather-tornado',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: 'Böen',
            ScreensaverEntityUnitText: 'm/s',
            ScreensaverEntityIconColor: {'val_min': 0, 'val_max': 120}
        },
        // bottomScreensaverEntity 4
        {
            ScreensaverEntity: 'brightsky.0.current.wind_bearing_text',
            ScreensaverEntityFactor: 1,
            ScreensaverEntityDecimalPlaces: 0,
            ScreensaverEntityIconOn: 'windsock',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: 'Windr.',
            ScreensaverEntityUnitText: '°',
            ScreensaverEntityIconColor: White
        },
        // bottomScreensaverEntity 5 (for Alternative and Advanced Screensaver)
        {
            ScreensaverEntity: 'sainlogic.0.weather.current.outdoorhumidity',
            ScreensaverEntityFactor: 1,
            ScreensaverEntityDecimalPlaces: 1,
            ScreensaverEntityIconOn: 'water-percent',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: 'Feuchte',
            ScreensaverEntityUnitText: '%',
            ScreensaverEntityIconColor: {'val_min': 0, 'val_max': 100, 'val_best': 65}
        },
        // bottomScreensaverEntity 6 (for Advanced Screensaver)
        {
            ScreensaverEntity: NSPanel_Path + 'Relay.1',
            ScreensaverEntityIconOn: 'coach-lamp-variant',
            ScreensaverEntityText: 'Street',
            ScreensaverEntityOnColor: Yellow,
            ScreensaverEntityOffColor: White,
            ScreensaverEntityOnText: 'Is ON',
            ScreensaverEntityOffText: 'Not ON'
        },
        // Examples for Advanced-Screensaver: https://github.com/joBr99/nspanel-lovelace-ui/wiki/ioBroker-Config-Screensaver#entity-status-icons-ab-v400 
    ],

    indicatorScreensaverEntity: [
        // Examples for Advanced-Screensaver: https://github.com/joBr99/nspanel-lovelace-ui/wiki/ioBroker-Config-Screensaver#entity-status-icons-ab-v400 
    ],

    // Status Icon 
    mrIcon1ScreensaverEntity: {
        ScreensaverEntity: NSPanel_Path + 'Relay.1',
        ScreensaverEntityIconOn: 'ceiling-fan',
        ScreensaverEntityIconOff: null,
        ScreensaverEntityValue: null,
        ScreensaverEntityValueDecimalPlace: 0,
        ScreensaverEntityValueUnit: null,
        ScreensaverEntityOnColor: On,
        ScreensaverEntityOffColor: HMIOff
    },
    mrIcon2ScreensaverEntity: {
        ScreensaverEntity: NSPanel_Path + 'Relay.2',
        ScreensaverEntityIconOn: 'lightbulb',
        ScreensaverEntityIconOff: null,
        ScreensaverEntityValue: null,
        ScreensaverEntityValueDecimalPlace: 0,
        ScreensaverEntityValueUnit: null,
        ScreensaverEntityOnColor: On,
        ScreensaverEntityOffColor: HMIOff
    },
    // ------ DE: Ende der Screensaver Einstellungen --------------------
    // ------ EN: End of screensaver settings ---------------------------

arteck

kann ich mit https://github.com/ticaki/ioBroker.nspanel-lovelace-ui/wiki/PageThermo2 ein whirlpool ansteuern ?

die DP's hätte ich gerne in der Card

werd aber mal wieder aus der Beschreibung nicht schlau..

ticaki

Ja,

ne cardThermo2 ist ne cardGrid2 mit nem Thermostat.

Da bei items (NICHT thermoItems) machste die schalter/anzeigen für filter, heater, session usw rein, wie bei einer cardGrid

const this_Thermostat: PageType =
    {
        'type': 'cardThermo2',
        'heading': 'Wohnzimmer',
        uniqueName: 'this_Thermostat',
        thermoItems: [
            {
                id: 'alias.0.NSPanel.1.usr.Temperatur.G.Wohnzimmer.1',
                name: 'Heizung',
                name2: 'Klimaanlage',
                minValue: 16,
                maxValue: 28,
                stepValue: 0.1,
            }
        ],
        'parent': 'main',
        'items': []
    };

Ich steuere damit meine Klimaanlage an, du müsstest name2 weg lassen

TT-Tom

@arteck

versuche mal das, musste nur ausbauen

const Thermo2New: PageType = {
        type: 'cardThermo2',
        uniqueName:'Seitenname für interne Verwendung - Pflicht',
        heading: 'egal wird eh nicht angezeigt',
        thermoItems:[
            {
                name: 'Das hier ist die Überschrift', 
                set:'mspa.0.control.target_temperature', // Der Einstellwert der Heizung
                thermoId1:'mspa.0.status.water_temperature', // Aktuelle Raumtemperatur (oberer Wert in der Anzeige)
                //thermoId2:'0_userdata.0.Einzelne_Geräte.Thermostat.HUMIDITY', // Aktuelle Luftfeuchtigkeit (unterer Wert in der Anzeige)
                //modeId:'0_userdata.0.Einzelne_Geräte.Thermostat.MODE', // Textfeld unterhalb der Werte - kein Zeichenkettendatenpunkt 
            }
        ],
        items:[
             {id: 'mspa.0.control.filter', icon: 'water-check'},
             {id: 'mspa.0.control.heater', icon:'heat-wave'},
usw. ...... 
        ],
    }

TT-Tom

@MichaelF

was genau möchtest du rüber kopieren, alles was du gezeigt hast?? bitte genauer definieren.

MichaelF

@TT-Tom

Ich glaube ich habe es hin bekommen, was nur nicht Funktioniert ist das umschalten auf die andere Vorhersage im Bildschirmschoner.

Hatte das Display vorher gemacht.

Hier meine gessamte Konfig:

 /***********************************************************************
         **                                                                   **
         **                    Screensaver Configuration                      **
         **                                                                   **
         ***********************************************************************/


        favoritScreensaverEntity: [],
        alternateScreensaverEntity: [
            // only used with alternate Screensaver
        ],

        indicatorScreensaverEntity: [
            // indicatorScreensaverEntity 1 (only Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'alias.0.NSPanel.allgemein.Status_offene_Fenster.ACTUAL',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 0,
                ScreensaverEntityIconOn: 'window-open-variant',
                ScreensaverEntityIconOff: 'window-closed-variant',
                ScreensaverEntityText: 'Fenster',
                ScreensaverEntityUnitText: '%',
                ScreensaverEntityIconColor: {val_min: 0, val_max: 1},
            },
            // indicatorScreensaverEntity 2 (only Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'alias.0.NSPanel.allgemein.Status_offene_Tuer.ACTUAL',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 0,
                ScreensaverEntityIconOn: 'door-open',
                ScreensaverEntityIconOff: 'door-closed',
                ScreensaverEntityText: 'Tür',
                ScreensaverEntityUnitText: '',
                ScreensaverEntityIconColor: {val_min: 0, val_max: 1},
            },
            // indicatorScreensaverEntity 3 (only Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'alias.0.NSPanel.allgemein.Status_Licht_An.ACTUAL',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 0,
                ScreensaverEntityIconOn: 'lightbulb',
                ScreensaverEntityIconOff: null,
                ScreensaverEntityText: 'Licht',
                ScreensaverEntityUnitText: '',
                ScreensaverEntityIconColor: {val_min: 0, val_max: 1},
            },
            // indicatorScreensaverEntity 4 (only Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'alias.0.Türschloss.ACTUAL',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 0,
                ScreensaverEntityIconOn: 'lock',
                ScreensaverEntityIconOff: 'lock-open',
                ScreensaverEntityText: 'Türschloss',
                ScreensaverEntityUnitText: '',
                ScreensaverEntityIconColor: {val_min: 0, val_max: 1, val_best: 1},
            },
            // indicatorScreensaverEntity 5 (only Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'alias.0.NSPanel.allgemein.Auto.Safety.ACTUAL',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 0,
                ScreensaverEntityIconOn: 'car-key',
                ScreensaverEntityIconOff: null,
                ScreensaverEntityText: 'Auto',
                ScreensaverEntityUnitText: '',
                ScreensaverEntityIconColor: {val_min: 0, val_max: 1, val_best: 1},
            },
        ],

        bottomScreensaverEntity: [
            // bottomScreensaverEntity 1
            {
            type: 'script',
            ScreensaverEntity: 'brightsky.0.daily.00.sunrise',
            ScreensaverEntityFactor: 1,
            ScreensaverEntityDecimalPlaces: 0,
            ScreensaverEntityDateFormat: {hour: '2-digit', minute: '2-digit'}, // Description at Wiki-Pages
            ScreensaverEntityIconOn: 'weather-sunset-up',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: 'Sonne',
            ScreensaverEntityUnitText: '%',
            ScreensaverEntityIconColor: MSYellow //{'val_min': 0, 'val_max': 100},
            },
            // bottomScreensaverEntity 2
            {
            type: 'script',
            ScreensaverEntity: 'sainlogic.0.weather.current.outdoorhumidity',
            ScreensaverEntityFactor: 1,
            ScreensaverEntityDecimalPlaces: 1,
            ScreensaverEntityIconOn: 'water-percent',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: 'Feuchte',
            ScreensaverEntityUnitText: '%',
            ScreensaverEntityIconColor: {'val_min': 0, 'val_max': 100, 'val_best': 65}
            },
            {
            type: 'script',
            ScreensaverEntity: 'sainlogic.0.weather.current.windspeed',
            ScreensaverEntityFactor: 1,
            ScreensaverEntityDecimalPlaces: 1,
            ScreensaverEntityIconOn: 'weather-windy',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: "Wind",
            ScreensaverEntityUnitText: 'm/s',
            ScreensaverEntityIconColor: {'val_min': 0, 'val_max': 120}
            },
            // bottomScreensaverEntity 3
            {
            type: 'script',
            ScreensaverEntity: 'sainlogic.0.weather.current.windgustspeed',
            ScreensaverEntityFactor: 1,
            ScreensaverEntityDecimalPlaces: 1,
            ScreensaverEntityIconOn: 'weather-tornado',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: 'Böen',
            ScreensaverEntityUnitText: 'm/s',
            ScreensaverEntityIconColor: {'val_min': 0, 'val_max': 120}
            },
            // bottomScreensaverEntity 4
            {
                type: 'script',
            ScreensaverEntity: 'brightsky.0.current.wind_bearing_text',
            ScreensaverEntityFactor: 1,
            ScreensaverEntityDecimalPlaces: 0,
            ScreensaverEntityIconOn: 'windsock',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityText: 'Windr.',
            ScreensaverEntityUnitText: '°',
            ScreensaverEntityIconColor: White,
            },
            // bottomScreensaverEntity 5 (Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'sainlogic.0.weather.current.outdoorhumidity',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 0,
                ScreensaverEntityIconOn: 'water-percent',
                ScreensaverEntityIconOff: null,
                ScreensaverEntityText: 'Feuchte',
                ScreensaverEntityUnitText: '%',
                ScreensaverEntityIconColor: {'val_min': 0, 'val_max': 100, 'val_best': 60}
            },
            // bottomScreensaverEntity 6 (for Advanced Screensaver)
           
            // Examples for Advanced-Screensaver: https://github.com/joBr99/nspanel-lovelace-ui/wiki/ioBroker-Config-Screensaver#entity-status-icons-ab-v400 

            // Some templates for the screensaver uncomment the lines to use them
            // If u use an other instance for the weather data, change the instance in the following lines
            // If you want to have them all, set weatherAddDefaultItems=true in the config and leave the following lines as they are!

            // zum nutzen der Vorlagen für den Bildschirmschoner die Zeilen auskommentieren, um sie zu verwenden
            // Wenn du eine andere Instanz für die Wetterdaten verwendest, ändere die Instanz in den folgenden Zeilen
            // Wenn du sie alle haben willst, setze weatherAddDefaultItems=true in der Konfiguration ganz oben und lass die folgenden Zeilen so wie sie sind!

            /*

            OPENWEATHERMAP

            // Bottom 1 - sunrise/set
            {
                type: 'template',
                template: 'text.openweathermap.favorit',
                dpInit: `/^openweathermap\\.0.+/`,
                modeScr: 'favorit',
            },
            // Bottom 2 -  Forecast Day 1
            {
                type: 'template',
                template: 'text.openweathermap.bot2values',
                dpInit: `/^openweathermap\\.0.+?day0/`,
                modeScr: 'bottom',
            },

            // Bottom 3 - Forecast Day 2
            {
                type: 'template',
                template: 'text.openweathermap.bot2values',
                dpInit: `/^openweathermap\\.0.+?day1/`,
                modeScr: 'bottom',
            },

            // Bottom 4 - Forecast Day 3
            {
                type: 'template',
                template: 'text.openweathermap.bot2values',
                dpInit: `/^openweathermap\\.0.+?day2/`,
                modeScr: 'bottom',
            },

            // Bottom 5 - Forecast Day 4
            {
                type: 'template',
                template: 'text.openweathermap.bot2values',
                dpInit: `/^openweathermap\\.0.+?day3/`,
                modeScr: 'bottom',
            },
            // Bottom 6 - Forecast Day 5
            {
                type: 'template',
                template: 'text.openweathermap.bot2values',
                dpInit: `/^openweathermap\\.0.+?day4/`,
                modeScr: 'bottom',
            },
            // Bottom 7 -  Forecast Day 6
            {
                type: 'template',
                template: 'text.openweathermap.bot2values',
                dpInit: `/^openweathermap\\.0.+?day5/`,
                modeScr: 'bottom',
            },

            // Bottom 8 - Windgeschwindigkeit
            {
                type: 'template',
                template: 'text.openweathermap.windspeed',
                dpInit: `/^openweathermap\\.0./`,
                modeScr: 'bottom',
            },

            // Bottom 9 - Böen
            {
                type: 'template',
                template: 'text.openweathermap.windgust',
                dpInit: `/^openweathermap\\.0./`,
                modeScr: 'bottom',
            },

            // Bottom 10 - Windrichtung
            {
                type: 'template',
                template: 'text.openweathermap.winddirection',
                dpInit: `/^openweathermap\\.0./`,
                modeScr: 'bottom',
            },

            // Bottom 11 - UV-Index
            {
                type: 'template',
                template: 'text.accuweather.uvindex',
                dpInit: `/^accuweather\\.0./`,
                modeScr: 'bottom',
            },
            */


            /*
            
            PIRATE-WEATHER

            // Bottom 1 - sunrise/set
            {
                type: 'template',
                template: 'text.pirate-weather.sunriseset',
                dpInit: `/^pirate-weather\\.0\\.weather\\.daily\\.00.+/`,
                modeScr: 'bottom',
            },
            // Bottom 2 -  Forecast Day 1
            {
                type: 'template',
                template: 'text.pirate-weather.bot2values',
                dpInit: `/^pirate-weather\\.0.+?\\.daily\\.01/`,
                modeScr: 'bottom',
            },

            // Bottom 3 - Forecast Day 2
            {
                type: 'template',
                template: 'text.pirate-weather.bot2values',
                dpInit: `/^pirate-weather\\.0.+?\\.daily\\.02/`,
                modeScr: 'bottom',
            },

            // Bottom 4 - Forecast Day 3
            {
                type: 'template',
                template: 'text.pirate-weather.bot2values',
                dpInit: `/^pirate-weather\\.0.+?\\.daily\\.03/`,
                modeScr: 'bottom',
            },

            // Bottom 5 - Forecast Day 4
            {
                type: 'template',
                template: 'text.pirate-weather.bot2values',
                dpInit: `/^pirate-weather\\.0.+?\\.daily\\.04/`,
                modeScr: 'bottom',
            },
            // Bottom 6 - Forecast Day 5
            {
                type: 'template',
                template: 'text.pirate-weather.bot2values',
                dpInit: `/^pirate-weather\\.0.+?\\.daily\\.05/`,
                modeScr: 'bottom',
            },
            // Bottom 7 -  Forecast Day 6
            {
                type: 'template',
                template: 'text.pirate-weather.bot2values',
                dpInit: `/^pirate-weather\\.0.+?\\.daily\\.06/`,
                modeScr: 'bottom',
            },

            // Bottom 8 - Windgeschwindigkeit
            {
                type: 'template',
                template: 'text.pirate-weather.windspeed',
                dpInit: `/^pirate-weather\\.0\\.weather\\.currently./`,
                modeScr: 'bottom',
            },

            // Bottom 9 - Böen
            {
                type: 'template',
                template: 'text.pirate-weather.windgust',
                dpInit: `/^pirate-weather\\.0\\.weather\\.currently./`,
                modeScr: 'bottom',
            },

            // Bottom 10 - Windrichtung
            {
                type: 'template',
                template: 'text.pirate-weather.winddirection',
                dpInit: `/^pirate-weather\\.0\\.weather\\.currently./`,
                modeScr: 'bottom',
            },

            // Bottom 11 - UV-Index
            {
                type: 'template',
                template: 'text.pirate-weather.uvindex',
                dpInit: `/^pirate-weather\\.0\\.weather\\.currently./`,
                modeScr: 'bottom',
            },
            // hier kann man dann eine Stundenübersicht erzeugen durch anpassen der 02 bzw. 04
            // die sind nicht in addDefaultWeather enthalten.
            {
                type: 'template',
                template: 'text.pirate-weather.hourlyweather',
                dpInit: `/^pirate-weather\\.0.+?\\.hourly\\.02/`,
                modeScr: 'bottom',
            },
            {
                type: 'template',
                template: 'text.pirate-weather.hourlyweather',
                dpInit: `/^pirate-weather\\.0.+?\\.hourly\\.04/`,
                modeScr: 'bottom',
            },
            */

          // Bright Sky
            {
                type: 'template',
                template: 'text.brightsky.sunriseset',
                dpInit: `/^brightsky\\.0\\.daily\\.00.+/`,
                modeScr: 'bottom',
            },
            // Bottom 2 - brightsky.0. Forecast Day 1
            {
                type: 'template',
                template: 'text.brightsky.bot2values',
                dpInit: `/^brightsky\\.0\\.daily\\.01/`,
                modeScr: 'bottom',
            },

            // Bottom 3 - brightsky.0. Forecast Day 2
            {
                type: 'template',
                template: 'text.brightsky.bot2values',
                dpInit: `/^brightsky\\.0\\.daily\\.02/`,
                modeScr: 'bottom',
            },

            // Bottom 4 - brightsky.0. Forecast Day 3
            {
                type: 'template',
                template: 'text.brightsky.bot2values',
                dpInit: `/^brightsky\\.0\\.daily\\.03/`,
                modeScr: 'bottom',
            },

            // Bottom 5 - brightsky.0. Forecast Day 4
            {
                type: 'template',
                template: 'text.brightsky.bot2values',
                dpInit: `/^brightsky\\.0\\.daily\\.04/`,
                modeScr: 'bottom',
            },
            // Bottom 6 - brightsky.0. Forecast Day 5
            {
                type: 'template',
                template: 'text.brightsky.bot2values',
                dpInit: `/^brightsky\\.0\\.daily\\.05/`,
                modeScr: 'bottom',
            },
            // Bottom 7 - brightsky.0. Forecast Day 6
            {
                type: 'template',
                template: 'text.brightsky.bot2values',
                dpInit: `/^brightsky\\.0\\.daily\\.06/`,
                modeScr: 'bottom',
            },
            // Bottom 8 - Windgeschwindigkeit
            {
                type: 'template',
                template: 'text.brightsky.windspeed',
                dpInit: `/^brightsky\\.0\\.current./`,
                modeScr: 'bottom',
            },

            // Bottom 9 - Böen

            {
                type: 'template',
                template: 'text.brightsky.windgust',
                dpInit: `/^brightsky\\.0\\.current./`,
                modeScr: 'bottom',
            },

            // Bottom 10 - Windrichtung
            {
                type: 'template',
                template: 'text.brightsky.winddirection',
                dpInit: `/^brightsky\\.0\\.current./`,
                modeScr: 'bottom',
            },
            // Bottom 10 - Solar
            {
                type: 'template',
                template: 'text.brightsky.solar',
                dpInit: `/^brightsky\\.0\\.current./`,
                modeScr: 'bottom',
            },
            
        ],

        leftScreensaverEntity: [
            // leftScreensaverEntity 1 (only Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'alias.0.NSPanel.Flur.Sensor.ANALOG.Temperature.ACTUAL',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 1,
                ScreensaverEntityIconOn: 'thermometer',
                ScreensaverEntityIconOff: null,
                ScreensaverEntityText: 'Temperatur',
                ScreensaverEntityUnitText: '°C',
                ScreensaverEntityIconColor: {val_min: 0, val_max: 35, val_best: 22},
            },
            // leftScreensaverEntity 2 (only Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'alias.0.Heizung.WärmeTagesVerbrauch.ACTUAL',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 1,
                ScreensaverEntityIconOn: 'counter',
                ScreensaverEntityIconOff: null,
                ScreensaverEntityText: 'Wärme',
                ScreensaverEntityUnitText: ' kWh',
                ScreensaverEntityIconColor: MSYellow, //{'val_min': 0, 'val_max': 5000}
            },
            // leftScreensaverEntity 3 (only Advanced Screensaver)
            {
                type: 'script',
                ScreensaverEntity: 'alias.0.NSPanel.allgemein.Abfall.event1.INFO',
                ScreensaverEntityFactor: 1,
                ScreensaverEntityDecimalPlaces: 0,
                ScreensaverEntityDateFormat: {year: 'numeric', month: '2-digit', day: '2-digit'},
                ScreensaverEntityIconOn: 'trash-can',
                ScreensaverEntityIconOff: null,
                ScreensaverEntityText: 'Abfall',
                ScreensaverEntityUnitText: '',
                ScreensaverEntityIconColor: '0_userdata.0.Abfallkalender.1.color',
            },
        ],

        // Status Icon 
        mrIcon1ScreensaverEntity: {
            type: 'script',
            ScreensaverEntity: 'Relay.1',
            ScreensaverEntityIconOn: 'ceiling-fan',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityValue: null,
            ScreensaverEntityValueDecimalPlace: 0,
            ScreensaverEntityValueUnit: null,
            ScreensaverEntityOnColor: On,
            ScreensaverEntityOffColor: HMIOff
        },
        mrIcon2ScreensaverEntity: {
            type: 'script',
            ScreensaverEntity: 'Relay.2',
            ScreensaverEntityIconOn: 'lightbulb',
            ScreensaverEntityIconOff: null,
            ScreensaverEntityValue: null,
            ScreensaverEntityValueDecimalPlace: 0,
            ScreensaverEntityValueUnit: null,
            ScreensaverEntityOnColor: On,
            ScreensaverEntityOffColor: HMIOff
        },
        // ------ DE: Ende der Screensaver Einstellungen --------------------
        // ------ EN: End of screensaver settings ---------------------------

Dimmer habe ich noch nicht hin bekommen:

Lässt sich nur ein und aus schalten hier der Alias:

Und diese Fehlermeldung ist echt nervig weil man immer den Adapter neu starten muss wenn man was am script ändert :-)


nspanel-lovelace-ui.0
2026-04-19 00:30:05.407	info	[controller] Panel NsPanelWohnzimmer removed!

nspanel-lovelace-ui.0
2026-04-19 00:30:05.296	warn	[NsPanelWohnzimmer] is offline!

nspanel-lovelace-ui.0
2026-04-19 00:30:05.295	info	[NsPanelWohnzimmer] Goint offline because delete panel!

nspanel-lovelace-ui.0
2026-04-19 00:30:05.295	error	[NsPanelWohnzimmer] Model missmatch! Config model is eu but panel send us-p. Check your config!

nspanel-lovelace-ui.0
2026-04-19 00:30:05.295	info	[NsPanelWohnzimmer] is online!

javascript.0
2026-04-19 00:30:04.974	info	script.js.nspanel-lovelace-ui_0.NsPanelWohnzimmer: Stopping script

javascript.0
2026-04-19 00:30:04.739	info	script.js.nspanel-lovelace-ui_0.NsPanelWohnzimmer: [ 'Panel for Topic: NsPanelWohnzimmer name: NsPanelWohnzimmer Script version 0.20.1 is correct!', 'done', '✅ Panel "08_D1_F9_A4_ED_44" reloaded with updated configuration.' ]

nspanel-lovelace-ui.0
2026-04-19 00:30:04.737	info	✅ Panel "08_D1_F9_A4_ED_44" reloaded with updated configuration.

admin.0
2026-04-19 00:30:03.883	info	<== Disconnect system.user.admin from ::ffff:192.168.178.52 javascript

admin.0
2026-04-19 00:30:03.883	info	<== Disconnect system.user.admin from ::ffff:192.168.178.52 javascript

nspanel-lovelace-ui.0
2026-04-19 00:30:03.341	info	[NsPanelWohnzimmer] Setting panel to offline until first message!

ical.0
2026-04-19 00:30:03.238	info	processing URL: Google https://calendar.google.com/calendar/ical/mferber83%40gmail.com/private-54e18925919b923d77c7864d1eaab115/basic.ics

ical.0
2026-04-19 00:30:02.297	info	starting. Version 1.19.7 in /opt/iobroker/node_modules/iobroker.ical, node: v22.22.2, js-controller: 7.0.7

nspanel-lovelace-ui.0
2026-04-19 00:30:02.280	info	[controller] Panel NsPanelWohnzimmer removed!

nspanel-lovelace-ui.0
2026-04-19 00:30:01.963	warn	[NsPanelWohnzimmer] is offline!

nspanel-lovelace-ui.0
2026-04-19 00:30:01.957	info	[NsPanelWohnzimmer] Goint offline because delete panel!

Anaonsten läuft das erste Panel

ticaki

Dein Panel sagt es wäre ein us-p keine Ahnung wie es darauf kommt. Was ist es denn?

MichaelF

@ticaki Ein US im Hochformat

MichaelF

Gibt es die Möglichkeit bei diesem Alias die Schrittgröße kleiner zu machen ?

{ id: 'alias.0.NSPanel.TemperaturWassserSpeicher', name: 'TemperaturSpeicher', useValue: true, suffixName: '°C'},

ticaki

Dann hast du es falsch in der initialisierung eingestellt - gehte auf nspanel initialisierung stelle klicke auf dem panel auf den stift stelle rechts oben us-p ein und klicke auf nspanel aktualisierung

MichaelF

@ticaki

hab ich schon zwei mal gemacht:

Immer die gleiche Fehlermeldung.

Wenn es hier auch falsch eingestellt wäre passt auch die Ansicht nicht, hatte ich am Anfang :-)

Community Forum

NEWS

Test Adapter NSPanel-lovelace-ui v0.17.x

0.17.4 (2026-04-16)

Support us

579

32.8k

82.8k

1.3m