Bitte in der nachfolgenden Übersicht die mit ... bzw x gekennzeichneten Felder ausfüllen und im Anschluss an die Tabelle auf Linux Systemen den Output des Commands iob diag einfügen. Hinweis: Das Eröffnen eines Issues hier ersetzt NICHT das Anlegen eine Issues im Repository des Adapters. Fehlerbehebungen werden ausschließlich über Issues getrackt. DANKE Bitte ausfüllen: Adaptername: iobroker Link zu Adapterrepository: www.github.com ... Adapterversion: ... js-controller Version: ... Admin Version: ... Hardwaresystem: NUC, Pi4 ... Arbeitsspeicher: 8xGB Festplattenart: SD-Karte, SSD, HDD, ... Betriebssystem: ... Nodejs-Version: v20.19.1 NPM-Version: 10.8.2 Installationsart: Skript oder Manuell ? Image, Docker genutzt: Ja - Nein Ort, Name der Imagedatei: ... ========== Start marking the full check here =========== Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: martinpi Icon name: computer Kernel: Linux 6.12.25+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 11:54:36 up 1 day, 21:39, 2 users, load average: 0.76, 0.71, 0.51 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2026-01-28 11:54:37 CET Universal time: Wed 2026-01-28 10:54:37 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 274M 6.8G 1.2M 1.2G 7.9G Swap: 536M 0B 536M Total: 8.7G 274M 7.3G Active iob-Instances: 0 7808 M total memory 262 M used memory 489 M active memory 599 M inactive memory 6481 M free memory 154 M buffer memory 1033 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 11:54:37 up 1 day, 21:39, 2 users, load average: 0.76, 0.71, 0.51 Tasks: 172 total, 1 running, 171 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 20.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7808.4 total, 6481.2 free, 262.0 used, 1188.5 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 7546.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * man-db.service loaded failed failed Daily man-db regeneration LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** 3 CRITICAL ERRORS DETECTED! Check 'sudo dmesg --level=emerg,alert,crit -T' for details *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 781M 1.2M 780M 1% /run /dev/sda2 ext4 56G 8.0G 46G 15% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 56M 455M 11% /boot/firmware tmpfs tmpfs 781M 0 781M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Jan 26 14:15:01 2026] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:37:EA:4C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=d619ff03-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Jan 26 14:15:11 2026] EXT4-fs (sda2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none. [Mon Jan 26 14:15:12 2026] EXT4-fs (sda2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none. [Wed Jan 28 11:54:26 2026] EXT4-fs error (device sda2): ext4_get_inode_loc:4548: inode #257337: block 1048787: comm npm ls: unable to read itable block [Wed Jan 28 11:54:26 2026] EXT4-fs error (device sda2) in ext4_reserve_inode_write:5829: IO failure [Wed Jan 28 11:54:26 2026] EXT4-fs error (device sda2): ext4_ext_tree_init:882: inode #257337: comm npm ls: mark_inode_dirty error Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.4G /var/ 1.1G /var/log/journal/0f704d1235fb4698b0f678460c992efd 1.1G /var/log/journal 1.1G /var/log 665M /var/cache Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 126M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 286M /opt/iobroker/iobroker-data/ 172M /opt/iobroker/iobroker-data/files 59M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 9.3M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js 8.1M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-Djx0nwYT.js 7.2M /opt/iobroker/iobroker-data/files/ham.admin/static/js/main.8080bc0b.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D200ZYDG-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 22.22.0-1nodesource1 Version table: 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages *** 20.19.1-1nodesource1 100 100 /var/lib/dpkg/status 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: ██████ █████ ███ ██ ██████ ███████ ███████ ██ ██ ██ ██ ████ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ██ ███ █████ ███████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██████ ██ ██ ██ ████ ██████ ███████ ██ ██ The current Node.js version (v20.19.1) is vulnerable to the following CVEs: CVE-2025-23166(high): The C++ method SignTraits::DeriveBits() may incorrectly call ThrowException() based on user-supplied inputs when executing in a background thread, crashing the Node.js process. Such cryptographic operations are commonly applied to untrusted inputs. Thus, this mechanism potentially allows an adversary to remotely crash a Node.js runtime. Patched versions: ^20.19.2 || ^22.15.1 || ^23.11.1 || ^24.0.2 = CVE-2025-23167(medium): A flaw in Node.js 20's HTTP parser allows improper termination of HTTP/1 headers using `\r\n\rX` instead of the required `\r\n\r\n`. This inconsistency enables request smuggling, allowing attackers to bypass proxy-based access controls and submit unauthorized requests. The issue was resolved by upgrading `llhttp` to version 9, which enforces correct header termination. Impact: * This vulnerability affects only Node.js 20.x users prior to the `llhttp` v9 upgrade. Patched versions: ^20.19.2 = CVE-2025-55130(high): A flaw in Node.js’s Permissions model allows attackers to bypass `--allow-fs-read` and `--allow-fs-write` restrictions using crafted relative symlink paths. By chaining directories and symlinks, a script granted access only to the current directory can escape the allowed path and read sensitive files. This breaks the expected isolation guarantees and enables arbitrary file read/write, leading to potential system compromise. This vulnerability affects users of the permission model on Node.js v20, v22, v24, and v25. Patched versions: ^20.20.0 || ^22.22.0 || ^24.13.0 || ^25.3.0 = CVE-2025-55131(high): A flaw in Node.js's buffer allocation logic can expose uninitialized memory when allocations are interrupted, when using the `vm` module with the timeout option. Under specific timing conditions, buffers allocated with `Buffer.alloc` and other `TypedArray` instances like `Uint8Array` may contain leftover data from previous operations, allowing in-process secrets like tokens or passwords to leak or causing data corruption. While exploitation typically requires precise timing or in-process code execution, it can become remotely exploitable when untrusted input influences workload and timeouts, leading to potential confidentiality and integrity impact. Patched versions: ^20.20.0 || ^22.22.0 || ^24.13.0 || ^25.3.0 = CVE-2025-55132(low): A flaw in Node.js's permission model allows a file's access and modification timestamps to be changed via `futimes()` even when the process has only read permissions. Unlike `utimes()`, `futimes()` does not apply the expected write-permission checks, which means file metadata can be modified in read-only directories. This behavior could be used to alter timestamps in ways that obscure activity, reducing the reliability of logs. This vulnerability affects users of the permission model on Node.js v20, v22, v24, and v25. Patched versions: ^20.20.0 || ^22.22.0 || ^24.13.0 || ^25.3.0 = CVE-2025-59465(high): A malformed `HTTP/2 HEADERS` frame with oversized, invalid `HPACK` data can cause Node.js to crash by triggering an unhandled `TLSSocket` error `ECONNRESET`. Instead of safely closing the connection, the process crashes, enabling a remote denial of service. This primarily affects applications that do not attach explicit error handlers to secure sockets, for example: server.on('secureConnection', socket => { socket.on('error', err => { console.log(err) }) }) Patched versions: ^20.20.0 || ^22.22.0 || ^24.13.0 || ^25.3.0 = CVE-2025-59466(medium): We have identified a bug in Node.js error handling where "Maximum call stack size exceeded" errors become uncatchable when `async_hooks.createHook()` is enabled. Instead of reaching `process.on('uncaughtException')`, the process terminates, making the crash unrecoverable. Applications that rely on `AsyncLocalStorage` (v22, v20) or `async_hooks.createHook()` (v24, v22, v20) become vulnerable to denial-of-service crashes triggered by deep recursion under specific conditions. Patched versions: ^20.20.0 || ^22.22.0 || ^24.13.0 || ^25.3.0 = CVE-2026-21637(medium): A flaw in Node.js TLS error handling allows remote attackers to crash or exhaust resources of a TLS server when `pskCallback` or `ALPNCallback` are in use. Synchronous exceptions thrown during these callbacks bypass standard TLS error handling paths (tlsClientError and error), causing either immediate process termination or silent file descriptor leaks that eventually lead to denial of service. Because these callbacks process attacker-controlled input during the TLS handshake, a remote client can repeatedly trigger the issue. This vulnerability affects TLS servers using PSK or ALPN callbacks across Node.js versions where these callbacks throw without being safely wrapped. Patched versions: ^20.20.0 || ^22.22.0 || ^24.13.0 || ^25.3.0 = *** ioBroker-Installation *** ioBroker Status /opt/iobroker/node_modules/yargs-parser/build/index.cjs:796 else if (o[key] === undefined && i SyntaxError: Invalid or unexpected token at wrapSafe (node:internal/modules/cjs/loader:1472:18) at Module._compile (node:internal/modules/cjs/loader:1501:20) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) at Module.load (node:internal/modules/cjs/loader:1275:32) at Module._load (node:internal/modules/cjs/loader:1096:12) at Module.require (node:internal/modules/cjs/loader:1298:19) at require (node:internal/modules/helpers:182:18) at Object.<anonymous> (/opt/iobroker/node_modules/yargs/build/index.cjs:1:60570) at Module._compile (node:internal/modules/cjs/loader:1529:14) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) Node.js v20.19.1 Hosts: /opt/iobroker/node_modules/yargs-parser/build/index.cjs:796 else if (o[key] === undefined && i SyntaxError: Invalid or unexpected token at wrapSafe (node:internal/modules/cjs/loader:1472:18) at Module._compile (node:internal/modules/cjs/loader:1501:20) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) at Module.load (node:internal/modules/cjs/loader:1275:32) at Module._load (node:internal/modules/cjs/loader:1096:12) at Module.require (node:internal/modules/cjs/loader:1298:19) at require (node:internal/modules/helpers:182:18) at Object.<anonymous> (/opt/iobroker/node_modules/yargs/build/index.cjs:1:60570) at Module._compile (node:internal/modules/cjs/loader:1529:14) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) Node.js v20.19.1 Core adapters versions /opt/iobroker/node_modules/yargs-parser/build/index.cjs:796 else if (o[key] === undefined && i SyntaxError: Invalid or unexpected token at wrapSafe (node:internal/modules/cjs/loader:1472:18) at Module._compile (node:internal/modules/cjs/loader:1501:20) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) at Module.load (node:internal/modules/cjs/loader:1275:32) at Module._load (node:internal/modules/cjs/loader:1096:12) at Module.require (node:internal/modules/cjs/loader:1298:19) at require (node:internal/modules/helpers:182:18) at Object.<anonymous> (/opt/iobroker/node_modules/yargs/build/index.cjs:1:60570) at Module._compile (node:internal/modules/cjs/loader:1529:14) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) Node.js v20.19.1 js-controller: /opt/iobroker/node_modules/yargs-parser/build/index.cjs:796 else if (o[key] === undefined && i SyntaxError: Invalid or unexpected token at wrapSafe (node:internal/modules/cjs/loader:1472:18) at Module._compile (node:internal/modules/cjs/loader:1501:20) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) at Module.load (node:internal/modules/cjs/loader:1275:32) at Module._load (node:internal/modules/cjs/loader:1096:12) at Module.require (node:internal/modules/cjs/loader:1298:19) at require (node:internal/modules/helpers:182:18) at Object.<anonymous> (/opt/iobroker/node_modules/yargs/build/index.cjs:1:60570) at Module._compile (node:internal/modules/cjs/loader:1529:14) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) Node.js v20.19.1 admin: /opt/iobroker/node_modules/yargs-parser/build/index.cjs:796 else if (o[key] === undefined && i SyntaxError: Invalid or unexpected token at wrapSafe (node:internal/modules/cjs/loader:1472:18) at Module._compile (node:internal/modules/cjs/loader:1501:20) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) at Module.load (node:internal/modules/cjs/loader:1275:32) at Module._load (node:internal/modules/cjs/loader:1096:12) at Module.require (node:internal/modules/cjs/loader:1298:19) at require (node:internal/modules/helpers:182:18) at Object.<anonymous> (/opt/iobroker/node_modules/yargs/build/index.cjs:1:60570) at Module._compile (node:internal/modules/cjs/loader:1529:14) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) Node.js v20.19.1 javascript: nodejs modules from github: 1 +-- homebridge-petkit-pet-feeder@3.2.2 (git+ssh://git@github.com/jubepue/homebridge-petkit-pet-feeder.git#83fd5ab0f5bca904898fb7d673264283c5c697db) Adapter State Enabled adapters with bindings ioBroker-Repositories /opt/iobroker/node_modules/yargs-parser/build/index.cjs:796 else if (o[key] === undefined && i SyntaxError: Invalid or unexpected token at wrapSafe (node:internal/modules/cjs/loader:1472:18) at Module._compile (node:internal/modules/cjs/loader:1501:20) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) at Module.load (node:internal/modules/cjs/loader:1275:32) at Module._load (node:internal/modules/cjs/loader:1096:12) at Module.require (node:internal/modules/cjs/loader:1298:19) at require (node:internal/modules/helpers:182:18) at Object.<anonymous> (/opt/iobroker/node_modules/yargs/build/index.cjs:1:60570) at Module._compile (node:internal/modules/cjs/loader:1529:14) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) Node.js v20.19.1 Installed ioBroker-Adapters /opt/iobroker/node_modules/yargs-parser/build/index.cjs:796 else if (o[key] === undefined && i SyntaxError: Invalid or unexpected token at wrapSafe (node:internal/modules/cjs/loader:1472:18) at Module._compile (node:internal/modules/cjs/loader:1501:20) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) at Module.load (node:internal/modules/cjs/loader:1275:32) at Module._load (node:internal/modules/cjs/loader:1096:12) at Module.require (node:internal/modules/cjs/loader:1298:19) at require (node:internal/modules/helpers:182:18) at Object.<anonymous> (/opt/iobroker/node_modules/yargs/build/index.cjs:1:60570) at Module._compile (node:internal/modules/cjs/loader:1529:14) at Module._extensions..js (node:internal/modules/cjs/loader:1613:10) Node.js v20.19.1 Objects and States Please stand by - This may take a while Objects: 0 States: 0 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending Updates: 168 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5705 633/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 5707 633/sshd: /usr/sbin udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5673 495/avahi-daemon: r udp 0 0 0.0.0.0:54654 0.0.0.0:* 104 5675 495/avahi-daemon: r udp6 0 0 :::49276 :::* 104 5676 495/avahi-daemon: r udp6 0 0 fe80::d507:604:f21e:546 :::* 0 1006 576/NetworkManager udp6 0 0 :::5353 :::* 104 5674 495/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-01-24 12:03:15.443 - error: host.martinpi Caught by controller[1]: Error by sending: Error: No reply in 247 seconds. 2026-01-24 12:03:15.443 - info: host.martinpi instance system.adapter.philips-air.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.443 - info: host.martinpi instance system.adapter.ham.1 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.444 - info: host.martinpi instance system.adapter.sonoff.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.444 - info: host.martinpi instance system.adapter.radar2.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.444 - info: host.martinpi instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.497 - info: host.martinpi instance system.adapter.energiefluss-erweitert.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.497 - info: host.martinpi instance system.adapter.fiat.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.498 - info: host.martinpi instance system.adapter.fritzdect.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.498 - info: host.martinpi instance system.adapter.go-e.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.498 - info: host.martinpi instance system.adapter.pvforecast.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.498 - warn: host.martinpi instance system.adapter.alpha-ess.0 terminated due to SIGKILL 2026-01-24 12:03:15.498 - info: host.martinpi instance system.adapter.alpha-ess.0 terminated with code null () 2026-01-24 12:03:15.498 - warn: host.martinpi instance system.adapter.modbus.0 terminated due to SIGKILL 2026-01-24 12:03:15.498 - info: host.martinpi instance system.adapter.modbus.0 terminated with code null () 2026-01-24 12:03:15.521 - warn: host.martinpi instance system.adapter.web.0 terminated due to SIGKILL 2026-01-24 12:03:15.521 - info: host.martinpi instance system.adapter.web.0 terminated with code null () 2026-01-24 12:03:15.523 - warn: host.martinpi instance system.adapter.javascript.0 terminated due to SIGKILL 2026-01-24 12:03:15.523 - info: host.martinpi instance system.adapter.javascript.0 terminated with code null () 2026-01-24 12:03:15.524 - info: host.martinpi instance system.adapter.history.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:15.894 - info: tuya.0 (620274) terminating 2026-01-24 12:03:15.895 - info: tuya.0 (620274) Terminated (NO_ERROR): Without reason 2026-01-24 12:03:16.493 - info: host.martinpi instance system.adapter.tuya.0 terminated with code 0 (NO_ERROR) 2026-01-24 12:03:16.493 - info: host.martinpi All instances are stopped. 2026-01-24 12:03:16.540 - info: host.martinpi terminated ============ Mark until here for C&P =============

Community Forum

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

NEWS

Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨
B
Bluefox

17

1

2.1k
Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄
B
Bluefox

13

1

936
Weihnachtsangebot 2025! 🎄
B
Bluefox

25

1

2.2k

Adapter läuft nicht mehr

Ungelöst Error/Bug

23 Beiträge 4 Kommentatoren 205 Aufrufe 3 Watching

M mattle1957

Das iob diag sieht jetzt folgendermaßen aus:

========== Start marking the full check here ===========

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: martinpi
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 08:18:51 up 17:29,  1 user,  load average: 2.77, 3.34, 1.77
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Fri 2026-01-30 08:18:51 CET
           Universal time: Fri 2026-01-30 07:18:51 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/pi
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.9G        3.0G         12M        3.4G        6.3G
Swap:           2.1G          0B        2.1G
Total:           10G        1.9G        5.1G

Active iob-Instances:   22

         7819 M total memory
         1822 M used memory
         1757 M active memory
         2819 M inactive memory
         2850 M free memory
          188 M buffer memory
         3070 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 08:18:52 up 17:29,  1 user,  load average: 2.77, 3.34, 1.77
Tasks: 213 total,   3 running, 210 sleeping,   0 stopped,   0 zombie
%Cpu(s): 60.4 us,  9.4 sy,  0.0 ni, 28.3 id,  0.0 wa,  0.0 hi,  1.9 si,  0.0 st
MiB Mem :   7819.7 total,   2887.9 free,   1784.8 used,   3258.7 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   6034.9 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  9.3M  1.6G   1% /run
/dev/sda2      ext4      9.8G  6.2G  3.3G  66% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     3.9G  2.8M  3.9G   1% /tmp
/dev/sda1      vfat      510M   74M  437M  15% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyS0.service
tmpfs          tmpfs     782M  8.0K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Jan 29 14:48:58 2026] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:37:EA:4C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=100683d9-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Thu Jan 29 14:49:05 2026] EXT4-fs (sda2): orphan cleanup on readonly fs
[Thu Jan 29 14:49:05 2026] EXT4-fs (sda2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none.
[Thu Jan 29 14:49:09 2026] EXT4-fs (sda2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w.

Show mounted filesystems:
TARGET   SOURCE    FSTYPE OPTIONS
/        /dev/sda2 ext4   rw,noatime
`-/boot/firmware
         /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iochars

Files in neuralgic directories:

/var:
2.5G    /var/
237M    /var/cache
231M    /var/cache/apt
177M    /var/lib
145M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
8.9M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
219M    /opt/iobroker/iobroker-data/
171M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
25M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-Djx0nwYT.js
7.2M    /opt/iobroker/iobroker-data/files/ham.admin/static/js/main.8080bc0b.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D200ZYDG-if00-port0

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.22.0
/usr/bin/node           v22.22.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.22.0-1nodesource1
  Candidate: 22.22.0-1nodesource1
  Version table:
 *** 22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
martinpi            martinpi (version: 7.0.7, hostname: martinpi      , alive, uptime: 183)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.22
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.accuweather.0            : accuweather           : martinpi                                 -  enabled
+ system.adapter.admin.0                  : admin                 : martinpi                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alpha-ess.0              : alpha-ess             : martinpi                                 -  enabled
+ system.adapter.backitup.0               : backitup              : martinpi                                 -  enabled
  system.adapter.bmw.0                    : bmw                   : martinpi                                 - disabled
+ system.adapter.device-reminder.0        : device-reminder       : martinpi                                 -  enabled
+ system.adapter.discovery.0              : discovery             : martinpi                                 -  enabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: martinpi                                 -  enabled
+ system.adapter.fiat.0                   : fiat                  : martinpi                                 -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : martinpi                                 -  enabled
+ system.adapter.go-e.0                   : go-e                  : martinpi                                 -  enabled
  system.adapter.habpanel.0               : habpanel              : martinpi                                 - disabled
  system.adapter.ham.0                    : ham                   : martinpi                                 -  enabled
  system.adapter.ham.1                    : ham                   : martinpi                                 -  enabled
+ system.adapter.history.0                : history               : martinpi                                 -  enabled
+ system.adapter.homepilot.0              : homepilot             : martinpi                                 -  enabled
+ system.adapter.javascript.0             : javascript            : martinpi                                 -  enabled
  system.adapter.modbus.0                 : modbus                : martinpi                                 - disabled
  system.adapter.modbus.1                 : modbus                : martinpi                                 - disabled
+ system.adapter.mqtt.0                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.2                   : mqtt                  : martinpi                                 - disabled, port: 9000, bind: 0.0.0.0
+ system.adapter.philips-air.0            : philips-air           : martinpi                                 -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : martinpi                                 -  enabled
  system.adapter.radar2.0                 : radar2                : martinpi                                 - disabled
+ system.adapter.smartmeter.0             : smartmeter            : martinpi                                 -  enabled
+ system.adapter.sonoff.0                 : sonoff                : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.tuya.0                   : tuya                  : martinpi                                 -  enabled
  system.adapter.viessmannapi.0           : viessmannapi          : martinpi                                 - disabled
+ system.adapter.web.0                    : web                   : martinpi                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : martinpi                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : martinpi                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "accuweather"  : 2.1.1    , installed 2.1.1
Adapter    "admin"        : 7.7.22   , installed 7.7.22
Adapter    "alpha-ess"    : 3.0.1    , installed 3.0.1
Adapter    "backitup"     : 3.3.13   , installed 3.3.13
Adapter    "bmw"          : 4.3.2    , installed 4.3.2
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "energiefluss-erweitert": 0.8.1, installed 0.8.1
Adapter    "fiat"         : 0.0.8    , installed 0.0.8
Adapter    "fritzdect"    : 2.6.2    , installed 2.6.2
Adapter    "go-e"         : 1.0.41   , installed 1.0.41
Adapter    "habpanel"     : 0.5.0    , installed 0.5.0
Adapter    "ham"          : 5.3.1    , installed 5.3.1
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "homepilot"    : 1.2.3    , installed 1.2.3
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "philips-air"  : 1.2.0    , installed 1.2.0
Adapter    "pvforecast"   : 5.0.0    , installed 5.0.0
Adapter    "radar2"       : 2.4.0    , installed 2.4.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19

Objects and States
Please stand by - This may take a while
Objects:        8733
States:         8061

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://deb.debian.org/debian-security trixie-security InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Hit:5 http://archive.raspberrypi.com/debian trixie InRelease
Reading package lists... Done
Pending Updates: 31

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          9321       1103/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          29810      1/init
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       54218      13539/io.sonoff.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       54688      12689/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       52196      12689/iobroker.js-c
tcp6       0      0 :::22                   :::*                    LISTEN      0          9323       1103/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          28302      1/init
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       54809      12725/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       57473      13852/io.web.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          28300      1/init
udp        0      0 0.0.0.0:33785           0.0.0.0:*                           1001       54198      13405/io.philips-ai
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        5853       610/avahi-daemon: r
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       58372      13613/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       58373      13613/io.tuya.0
udp        0      0 0.0.0.0:56443           0.0.0.0:*                           101        5855       610/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          28820      1/init
udp6       0      0 fe80::da3a:ddff:fe3:546 :::*                                0          7074       678/NetworkManager
udp6       0      0 :::5353                 :::*                                101        5854       610/avahi-daemon: r
udp6       0      0 :::60941                :::*                                101        5856       610/avahi-daemon: r

*** Log File - Last 25 Lines ***

2026-01-30 08:18:52.789  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:18:55.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:18:59.429  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:03.786  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:04.055  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimem" has value "1769757544038" greater than max "2147483648"
2026-01-30 08:19:04.170  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimed" has value "1769757544169" greater than max "2147483648"
2026-01-30 08:19:04.406  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimem" has value "1769757544399" greater than max "2147483648"
2026-01-30 08:19:04.519  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimed" has value "1769757544518" greater than max "2147483648"
2026-01-30 08:19:07.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:09.390  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:14.788  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:19.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:19.451  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:25.789  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:29.437  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:31.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:34.223  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimem" has value "1769757574218" greater than max "2147483648"
2026-01-30 08:19:34.325  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimed" has value "1769757574324" greater than max "2147483648"
2026-01-30 08:19:34.537  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimem" has value "1769757574532" greater than max "2147483648"
2026-01-30 08:19:34.636  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimed" has value "1769757574636" greater than max "2147483648"
2026-01-30 08:19:36.788  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:39.430  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:43.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:47.784  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:49.441  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"

============ Mark until here for C&P =============

Wie lange es genau gedauert hat kann ich nicht sagen, da ich nach dem Einspielen des backups vom Rechner weggegangen bin (hat mir zu lange gedauert bis alle Adapter wieder gelaufen sind). Heute früh war alles paletti.

Thomas Braun

Most Active

schrieb am

@mattle1957

Updates einspielen...
Pending Updates: 31

M Offline
M Offline
mattle1957

schrieb am zuletzt editiert von

#10

Mache ich dann später noch! Nochmals vielen Dank für die hervorragende Unterstützung!
1 Antwort Letzte Antwort

0

M mattle1957

Das iob diag sieht jetzt folgendermaßen aus:

========== Start marking the full check here ===========

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: martinpi
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 08:18:51 up 17:29,  1 user,  load average: 2.77, 3.34, 1.77
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Fri 2026-01-30 08:18:51 CET
           Universal time: Fri 2026-01-30 07:18:51 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/pi
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.9G        3.0G         12M        3.4G        6.3G
Swap:           2.1G          0B        2.1G
Total:           10G        1.9G        5.1G

Active iob-Instances:   22

         7819 M total memory
         1822 M used memory
         1757 M active memory
         2819 M inactive memory
         2850 M free memory
          188 M buffer memory
         3070 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 08:18:52 up 17:29,  1 user,  load average: 2.77, 3.34, 1.77
Tasks: 213 total,   3 running, 210 sleeping,   0 stopped,   0 zombie
%Cpu(s): 60.4 us,  9.4 sy,  0.0 ni, 28.3 id,  0.0 wa,  0.0 hi,  1.9 si,  0.0 st
MiB Mem :   7819.7 total,   2887.9 free,   1784.8 used,   3258.7 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   6034.9 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  9.3M  1.6G   1% /run
/dev/sda2      ext4      9.8G  6.2G  3.3G  66% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     3.9G  2.8M  3.9G   1% /tmp
/dev/sda1      vfat      510M   74M  437M  15% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyS0.service
tmpfs          tmpfs     782M  8.0K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Jan 29 14:48:58 2026] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:37:EA:4C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=100683d9-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Thu Jan 29 14:49:05 2026] EXT4-fs (sda2): orphan cleanup on readonly fs
[Thu Jan 29 14:49:05 2026] EXT4-fs (sda2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none.
[Thu Jan 29 14:49:09 2026] EXT4-fs (sda2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w.

Show mounted filesystems:
TARGET   SOURCE    FSTYPE OPTIONS
/        /dev/sda2 ext4   rw,noatime
`-/boot/firmware
         /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iochars

Files in neuralgic directories:

/var:
2.5G    /var/
237M    /var/cache
231M    /var/cache/apt
177M    /var/lib
145M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
8.9M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
219M    /opt/iobroker/iobroker-data/
171M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
25M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-Djx0nwYT.js
7.2M    /opt/iobroker/iobroker-data/files/ham.admin/static/js/main.8080bc0b.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D200ZYDG-if00-port0

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.22.0
/usr/bin/node           v22.22.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.22.0-1nodesource1
  Candidate: 22.22.0-1nodesource1
  Version table:
 *** 22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
martinpi            martinpi (version: 7.0.7, hostname: martinpi      , alive, uptime: 183)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.22
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.accuweather.0            : accuweather           : martinpi                                 -  enabled
+ system.adapter.admin.0                  : admin                 : martinpi                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alpha-ess.0              : alpha-ess             : martinpi                                 -  enabled
+ system.adapter.backitup.0               : backitup              : martinpi                                 -  enabled
  system.adapter.bmw.0                    : bmw                   : martinpi                                 - disabled
+ system.adapter.device-reminder.0        : device-reminder       : martinpi                                 -  enabled
+ system.adapter.discovery.0              : discovery             : martinpi                                 -  enabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: martinpi                                 -  enabled
+ system.adapter.fiat.0                   : fiat                  : martinpi                                 -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : martinpi                                 -  enabled
+ system.adapter.go-e.0                   : go-e                  : martinpi                                 -  enabled
  system.adapter.habpanel.0               : habpanel              : martinpi                                 - disabled
  system.adapter.ham.0                    : ham                   : martinpi                                 -  enabled
  system.adapter.ham.1                    : ham                   : martinpi                                 -  enabled
+ system.adapter.history.0                : history               : martinpi                                 -  enabled
+ system.adapter.homepilot.0              : homepilot             : martinpi                                 -  enabled
+ system.adapter.javascript.0             : javascript            : martinpi                                 -  enabled
  system.adapter.modbus.0                 : modbus                : martinpi                                 - disabled
  system.adapter.modbus.1                 : modbus                : martinpi                                 - disabled
+ system.adapter.mqtt.0                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.2                   : mqtt                  : martinpi                                 - disabled, port: 9000, bind: 0.0.0.0
+ system.adapter.philips-air.0            : philips-air           : martinpi                                 -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : martinpi                                 -  enabled
  system.adapter.radar2.0                 : radar2                : martinpi                                 - disabled
+ system.adapter.smartmeter.0             : smartmeter            : martinpi                                 -  enabled
+ system.adapter.sonoff.0                 : sonoff                : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.tuya.0                   : tuya                  : martinpi                                 -  enabled
  system.adapter.viessmannapi.0           : viessmannapi          : martinpi                                 - disabled
+ system.adapter.web.0                    : web                   : martinpi                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : martinpi                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : martinpi                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "accuweather"  : 2.1.1    , installed 2.1.1
Adapter    "admin"        : 7.7.22   , installed 7.7.22
Adapter    "alpha-ess"    : 3.0.1    , installed 3.0.1
Adapter    "backitup"     : 3.3.13   , installed 3.3.13
Adapter    "bmw"          : 4.3.2    , installed 4.3.2
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "energiefluss-erweitert": 0.8.1, installed 0.8.1
Adapter    "fiat"         : 0.0.8    , installed 0.0.8
Adapter    "fritzdect"    : 2.6.2    , installed 2.6.2
Adapter    "go-e"         : 1.0.41   , installed 1.0.41
Adapter    "habpanel"     : 0.5.0    , installed 0.5.0
Adapter    "ham"          : 5.3.1    , installed 5.3.1
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "homepilot"    : 1.2.3    , installed 1.2.3
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "philips-air"  : 1.2.0    , installed 1.2.0
Adapter    "pvforecast"   : 5.0.0    , installed 5.0.0
Adapter    "radar2"       : 2.4.0    , installed 2.4.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19

Objects and States
Please stand by - This may take a while
Objects:        8733
States:         8061

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://deb.debian.org/debian-security trixie-security InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Hit:5 http://archive.raspberrypi.com/debian trixie InRelease
Reading package lists... Done
Pending Updates: 31

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          9321       1103/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          29810      1/init
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       54218      13539/io.sonoff.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       54688      12689/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       52196      12689/iobroker.js-c
tcp6       0      0 :::22                   :::*                    LISTEN      0          9323       1103/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          28302      1/init
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       54809      12725/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       57473      13852/io.web.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          28300      1/init
udp        0      0 0.0.0.0:33785           0.0.0.0:*                           1001       54198      13405/io.philips-ai
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        5853       610/avahi-daemon: r
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       58372      13613/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       58373      13613/io.tuya.0
udp        0      0 0.0.0.0:56443           0.0.0.0:*                           101        5855       610/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          28820      1/init
udp6       0      0 fe80::da3a:ddff:fe3:546 :::*                                0          7074       678/NetworkManager
udp6       0      0 :::5353                 :::*                                101        5854       610/avahi-daemon: r
udp6       0      0 :::60941                :::*                                101        5856       610/avahi-daemon: r

*** Log File - Last 25 Lines ***

2026-01-30 08:18:52.789  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:18:55.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:18:59.429  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:03.786  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:04.055  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimem" has value "1769757544038" greater than max "2147483648"
2026-01-30 08:19:04.170  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimed" has value "1769757544169" greater than max "2147483648"
2026-01-30 08:19:04.406  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimem" has value "1769757544399" greater than max "2147483648"
2026-01-30 08:19:04.519  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimed" has value "1769757544518" greater than max "2147483648"
2026-01-30 08:19:07.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:09.390  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:14.788  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:19.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:19.451  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:25.789  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:29.437  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:31.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:34.223  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimem" has value "1769757574218" greater than max "2147483648"
2026-01-30 08:19:34.325  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimed" has value "1769757574324" greater than max "2147483648"
2026-01-30 08:19:34.537  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimem" has value "1769757574532" greater than max "2147483648"
2026-01-30 08:19:34.636  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimed" has value "1769757574636" greater than max "2147483648"
2026-01-30 08:19:36.788  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:39.430  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:43.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:47.784  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:49.441  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"

============ Mark until here for C&P =============

Homoran

Global Moderator Administrators

schrieb am

#11

@mattle1957 sagte in Adapter läuft nicht mehr:

08:18:51 up 17:29, 1 user, load average: 2.77, 3.34, 1.77

wenn du nicht gegen 08:13 irgendwas größeres am iobroker gespielt hast, ist der Pi möglicherweise an seiner Leistungsgrenze.

Oder sieh mal im log nach was da war, das log im diag reicht nicht soweit zurück.
Allerdings sind da innerhalb 2 Min. genug Dinge drin, die du fixen solltest

M Offline
M Offline
mattle1957

schrieb am zuletzt editiert von

#12

Ich muss sowieso den einen oder anderen Adapter den ich nicht mehr benötige, rausschmeissen. Dann sollte der Pi wieder passen. Sonst muss ich den mal auf einen 5er mit mehr RAM aufrüsten.
Man installiert doch mal einfach einen Adapter und merkt später dass man ihn nicht benötigt.
H 1 Antwort Letzte Antwort

0
M mattle1957

Ich muss sowieso den einen oder anderen Adapter den ich nicht mehr benötige, rausschmeissen. Dann sollte der Pi wieder passen. Sonst muss ich den mal auf einen 5er mit mehr RAM aufrüsten.
Man installiert doch mal einfach einen Adapter und merkt später dass man ihn nicht benötigt.
H Offline
H Offline
Homoran
Global Moderator Administrators
schrieb am zuletzt editiert von Homoran

#13

@mattle1957 sagte in Adapter läuft nicht mehr:

Dann sollte der Pi wieder passen

es geht um den load average, nicht um RAM!
die load average geht an die Grenze und sinkt anschließend auf ein deutlich niedrigeren Wert, der auch vorher existierte.
Also ist da etwas, was nicht rund läuft.

Natürlich kann man sich, wenn man mit platten Reifen nicht nehr so dchnell vorankommt auch rinen stärkeren Motor einbauen lassen, anstelle den Reifen aufzupumpen.
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
1 Antwort Letzte Antwort

0

M mattle1957

Das iob diag sieht jetzt folgendermaßen aus:

========== Start marking the full check here ===========

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: martinpi
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 08:18:51 up 17:29,  1 user,  load average: 2.77, 3.34, 1.77
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Fri 2026-01-30 08:18:51 CET
           Universal time: Fri 2026-01-30 07:18:51 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/pi
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.9G        3.0G         12M        3.4G        6.3G
Swap:           2.1G          0B        2.1G
Total:           10G        1.9G        5.1G

Active iob-Instances:   22

         7819 M total memory
         1822 M used memory
         1757 M active memory
         2819 M inactive memory
         2850 M free memory
          188 M buffer memory
         3070 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 08:18:52 up 17:29,  1 user,  load average: 2.77, 3.34, 1.77
Tasks: 213 total,   3 running, 210 sleeping,   0 stopped,   0 zombie
%Cpu(s): 60.4 us,  9.4 sy,  0.0 ni, 28.3 id,  0.0 wa,  0.0 hi,  1.9 si,  0.0 st
MiB Mem :   7819.7 total,   2887.9 free,   1784.8 used,   3258.7 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   6034.9 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  9.3M  1.6G   1% /run
/dev/sda2      ext4      9.8G  6.2G  3.3G  66% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     3.9G  2.8M  3.9G   1% /tmp
/dev/sda1      vfat      510M   74M  437M  15% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyS0.service
tmpfs          tmpfs     782M  8.0K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Jan 29 14:48:58 2026] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:37:EA:4C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=100683d9-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Thu Jan 29 14:49:05 2026] EXT4-fs (sda2): orphan cleanup on readonly fs
[Thu Jan 29 14:49:05 2026] EXT4-fs (sda2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none.
[Thu Jan 29 14:49:09 2026] EXT4-fs (sda2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w.

Show mounted filesystems:
TARGET   SOURCE    FSTYPE OPTIONS
/        /dev/sda2 ext4   rw,noatime
`-/boot/firmware
         /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iochars

Files in neuralgic directories:

/var:
2.5G    /var/
237M    /var/cache
231M    /var/cache/apt
177M    /var/lib
145M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
8.9M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
219M    /opt/iobroker/iobroker-data/
171M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
25M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-Djx0nwYT.js
7.2M    /opt/iobroker/iobroker-data/files/ham.admin/static/js/main.8080bc0b.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_D200ZYDG-if00-port0

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.22.0
/usr/bin/node           v22.22.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.22.0-1nodesource1
  Candidate: 22.22.0-1nodesource1
  Version table:
 *** 22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
martinpi            martinpi (version: 7.0.7, hostname: martinpi      , alive, uptime: 183)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.22
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.accuweather.0            : accuweather           : martinpi                                 -  enabled
+ system.adapter.admin.0                  : admin                 : martinpi                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alpha-ess.0              : alpha-ess             : martinpi                                 -  enabled
+ system.adapter.backitup.0               : backitup              : martinpi                                 -  enabled
  system.adapter.bmw.0                    : bmw                   : martinpi                                 - disabled
+ system.adapter.device-reminder.0        : device-reminder       : martinpi                                 -  enabled
+ system.adapter.discovery.0              : discovery             : martinpi                                 -  enabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: martinpi                                 -  enabled
+ system.adapter.fiat.0                   : fiat                  : martinpi                                 -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : martinpi                                 -  enabled
+ system.adapter.go-e.0                   : go-e                  : martinpi                                 -  enabled
  system.adapter.habpanel.0               : habpanel              : martinpi                                 - disabled
  system.adapter.ham.0                    : ham                   : martinpi                                 -  enabled
  system.adapter.ham.1                    : ham                   : martinpi                                 -  enabled
+ system.adapter.history.0                : history               : martinpi                                 -  enabled
+ system.adapter.homepilot.0              : homepilot             : martinpi                                 -  enabled
+ system.adapter.javascript.0             : javascript            : martinpi                                 -  enabled
  system.adapter.modbus.0                 : modbus                : martinpi                                 - disabled
  system.adapter.modbus.1                 : modbus                : martinpi                                 - disabled
+ system.adapter.mqtt.0                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.mqtt.2                   : mqtt                  : martinpi                                 - disabled, port: 9000, bind: 0.0.0.0
+ system.adapter.philips-air.0            : philips-air           : martinpi                                 -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : martinpi                                 -  enabled
  system.adapter.radar2.0                 : radar2                : martinpi                                 - disabled
+ system.adapter.smartmeter.0             : smartmeter            : martinpi                                 -  enabled
+ system.adapter.sonoff.0                 : sonoff                : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.tuya.0                   : tuya                  : martinpi                                 -  enabled
  system.adapter.viessmannapi.0           : viessmannapi          : martinpi                                 - disabled
+ system.adapter.web.0                    : web                   : martinpi                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : martinpi                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : martinpi                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : martinpi                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "accuweather"  : 2.1.1    , installed 2.1.1
Adapter    "admin"        : 7.7.22   , installed 7.7.22
Adapter    "alpha-ess"    : 3.0.1    , installed 3.0.1
Adapter    "backitup"     : 3.3.13   , installed 3.3.13
Adapter    "bmw"          : 4.3.2    , installed 4.3.2
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "energiefluss-erweitert": 0.8.1, installed 0.8.1
Adapter    "fiat"         : 0.0.8    , installed 0.0.8
Adapter    "fritzdect"    : 2.6.2    , installed 2.6.2
Adapter    "go-e"         : 1.0.41   , installed 1.0.41
Adapter    "habpanel"     : 0.5.0    , installed 0.5.0
Adapter    "ham"          : 5.3.1    , installed 5.3.1
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "homepilot"    : 1.2.3    , installed 1.2.3
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "philips-air"  : 1.2.0    , installed 1.2.0
Adapter    "pvforecast"   : 5.0.0    , installed 5.0.0
Adapter    "radar2"       : 2.4.0    , installed 2.4.0
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19

Objects and States
Please stand by - This may take a while
Objects:        8733
States:         8061

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://deb.debian.org/debian-security trixie-security InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Hit:5 http://archive.raspberrypi.com/debian trixie InRelease
Reading package lists... Done
Pending Updates: 31

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          9321       1103/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          29810      1/init
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       54218      13539/io.sonoff.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       54688      12689/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       52196      12689/iobroker.js-c
tcp6       0      0 :::22                   :::*                    LISTEN      0          9323       1103/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          28302      1/init
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       54809      12725/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       57473      13852/io.web.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          28300      1/init
udp        0      0 0.0.0.0:33785           0.0.0.0:*                           1001       54198      13405/io.philips-ai
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        5853       610/avahi-daemon: r
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       58372      13613/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       58373      13613/io.tuya.0
udp        0      0 0.0.0.0:56443           0.0.0.0:*                           101        5855       610/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          28820      1/init
udp6       0      0 fe80::da3a:ddff:fe3:546 :::*                                0          7074       678/NetworkManager
udp6       0      0 :::5353                 :::*                                101        5854       610/avahi-daemon: r
udp6       0      0 :::60941                :::*                                101        5856       610/avahi-daemon: r

*** Log File - Last 25 Lines ***

2026-01-30 08:18:52.789  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:18:55.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:18:59.429  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:03.786  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:04.055  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimem" has value "1769757544038" greater than max "2147483648"
2026-01-30 08:19:04.170  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimed" has value "1769757544169" greater than max "2147483648"
2026-01-30 08:19:04.406  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimem" has value "1769757544399" greater than max "2147483648"
2026-01-30 08:19:04.519  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimed" has value "1769757544518" greater than max "2147483648"
2026-01-30 08:19:07.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:09.390  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:14.788  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:19.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:19.451  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:25.789  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:29.437  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:31.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:34.223  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimem" has value "1769757574218" greater than max "2147483648"
2026-01-30 08:19:34.325  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300188482.energy_stats.datatimed" has value "1769757574324" greater than max "2147483648"
2026-01-30 08:19:34.537  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimem" has value "1769757574532" greater than max "2147483648"
2026-01-30 08:19:34.636  - warn: fritzdect.0 (13770) State value to set for "fritzdect.0.DECT_116300450036.energy_stats.datatimed" has value "1769757574636" greater than max "2147483648"
2026-01-30 08:19:36.788  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:39.430  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"
2026-01-30 08:19:43.052  - warn: homepilot.0 (12903) Cannot connect to Homepilot: Error: connect EHOSTUNREACH 192.168.2.15:80
2026-01-30 08:19:47.784  - info: smartmeter.0 (13465) Received 4 values, 0 updated
2026-01-30 08:19:49.441  - info: device-reminder.0 (13663) State value to set for "device-reminder.0.HP Drucker.live consumption" has to be type "number" but received type "string"

============ Mark until here for C&P =============

crunchip

Forum Testing Most Active

schrieb am

#14

@mattle1957 sagte in Adapter läuft nicht mehr:

system.adapter.mqtt.0 : mqtt : martinpi - enabled, port: 1883, bind: 0.0.0.0

system.adapter.mqtt.1 : mqtt : martinpi - enabled, port: 1883, bind: 0.0.0.0

system.adapter.sonoff.0 : sonoff : martinpi - enabled, port: 1883, bind: 0.0.0.0

solltest mal deine Ports überdenken, das passt so nicht

M Offline
M Offline
mattle1957

schrieb am zuletzt editiert von

#15

@ crunchip : die Ports passen. Nur mit diesen funktioniert es.
H 1 Antwort Letzte Antwort

0
M mattle1957

@ crunchip : die Ports passen. Nur mit diesen funktioniert es.
H Offline
H Offline
Homoran
Global Moderator Administrators
schrieb am zuletzt editiert von

#16

@mattle1957 sagte in Adapter läuft nicht mehr:

@ crunchip : die Ports passen. Nur mit diesen funktioniert es.

das sind zwei unterschiedliche Aussagen!
passend sind die Ports definitiv nicht.
Es können nicht 2 Instanzen auf dem selben Port lauschen.

Dass es nur so "funktioniert" wird an der falschen Konfiguration der Endgeräte liegen
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
1 Antwort Letzte Antwort

1
M Offline
M Offline
mattle1957

schrieb am zuletzt editiert von

#17

die Ports stehen doch in Verbindung mit der URL und die ist unterschiedlich!
C H 2 Antworten Letzte Antwort

0
M mattle1957

die Ports stehen doch in Verbindung mit der URL und die ist unterschiedlich!
C Abwesend
C Abwesend
crunchip
Forum Testing Most Active
schrieb am zuletzt editiert von

#18

@mattle1957 sagte in Adapter läuft nicht mehr:

und die ist unterschiedlich

die da wäre?
IP:Port und du hast mqtt und sonoff auf dem selben Port laufen
umgestiegen von Proxmox auf Unraid
1 Antwort Letzte Antwort

1
M mattle1957

die Ports stehen doch in Verbindung mit der URL und die ist unterschiedlich!
H Offline
H Offline
Homoran
Global Moderator Administrators
schrieb am zuletzt editiert von

#19

@mattle1957 sagte in Adapter läuft nicht mehr:

und die ist unterschiedlich!

dein Raspi hat verschiedene IPs?
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
M 1 Antwort Letzte Antwort

1
C Abwesend
C Abwesend
crunchip
Forum Testing Most Active
schrieb am zuletzt editiert von

#20

ich denke er hat noch nen externen mqtt laufen und seinen mqtt Adapter als client, is trotzdem falsch konfiguriert
umgestiegen von Proxmox auf Unraid
1 Antwort Letzte Antwort

1
H Homoran

@mattle1957 sagte in Adapter läuft nicht mehr:

und die ist unterschiedlich!

dein Raspi hat verschiedene IPs?
M Offline
M Offline
mattle1957

schrieb am zuletzt editiert von

#21

@Homoran
Nein, aber die darauf laufenden Adapter greifen auf verschiedene IP's und dem zugehörigen Port zu.
H C 2 Antworten Letzte Antwort

0
M mattle1957

@Homoran
Nein, aber die darauf laufenden Adapter greifen auf verschiedene IP's und dem zugehörigen Port zu.
H Offline
H Offline
Homoran
Global Moderator Administrators
schrieb am zuletzt editiert von

#22

@mattle1957 sagte in Adapter läuft nicht mehr:

greifen auf verschiedene IP's und dem zugehörigen Port

nöö!
die Geräte greifen auf den selben Port drines Raspi zu.
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
1 Antwort Letzte Antwort

1
M mattle1957

@Homoran
Nein, aber die darauf laufenden Adapter greifen auf verschiedene IP's und dem zugehörigen Port zu.
C Abwesend
C Abwesend
crunchip
Forum Testing Most Active
schrieb am zuletzt editiert von

#23

@mattle1957
umgestiegen von Proxmox auf Unraid
1 Antwort Letzte Antwort

0

Anmelden zum Antworten

Support us

544

Online

32.6k

Benutzer

82.2k

Themen

1.3m

Beiträge