Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. Tester
  4. Test Nebenkosten-Monitor v1.5.1 - Renamed

NEWS

  • Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨
    BluefoxB
    Bluefox
    17
    1
    2.2k

  • Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄
    BluefoxB
    Bluefox
    13
    1
    944

  • Weihnachtsangebot 2025! 🎄
    BluefoxB
    Bluefox
    25
    1
    2.2k

Test Nebenkosten-Monitor v1.5.1 - Renamed

Geplant Angeheftet Gesperrt Verschoben Tester
150 Beiträge 16 Kommentatoren 3.3k Aufrufe 19 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • S Sammydk

    OK, Umlaute gehen nicht, das ist aber kein Problem ich kann auch Hauszaehler anstatt Hauszähler schreiben, wenn sowieso auf internationale Schreibweise umgestellt wird, ist das so OK.

    fischi87F Online
    fischi87F Online
    fischi87
    schrieb am zuletzt editiert von
    #114

    @Sammydk

    Oh ja das muss ich prüfen, das soll natürlich nicht sein. Danke

    1 Antwort Letzte Antwort
    0
    • S Sammydk

      Ich erhalte noch zwei Warnmeldungen von GAS, Wasser ist ohne Warnmeldungen, das scheint zu laufen.
      Hier die beiden Gas-Meldungen die mir leider nichts sagen.

      utility-monitor.0
      2026-01-22 11:09:23.715 warn State "utility-monitor.0.gas.Hauszaehler.consumption.yearly" has no existing object, this might lead to an error in future versions
      utility-monitor.0
      2026-01-22 11:09:23.668 warn State "utility-monitor.0.gas.Hauszaehler.consumption.yearlyVolume" has no existing object, this might lead to an error in future versions

      fischi87F Online
      fischi87F Online
      fischi87
      schrieb am zuletzt editiert von fischi87
      #115

      @Sammydk

      Konnte ich jetzt noch nicht reproduzieren aber ich schau es mir an. Noch jemand mit der Warnung?

      1 Antwort Letzte Antwort
      0
      • S Offline
        S Offline
        Sammydk
        schrieb am zuletzt editiert von Sammydk
        #116

        Ohhh, schei.....
        ich bin durch das wechseln zwischen 1.3 und 1.4 versehentlich in dem falschen Objektbaum geraten.
        Das Problem mit "main" gibt es nicht, ich habe in der 1.4 keinen Namen gesetzt bei Hauszähler, deshalb steht hier "main".
        Meine Schuld es geht natürlich mit Namen richtig.
        Den Punkt kannst Du streichen Sorry.
        Hier ist alles richtig. Ich muss hier nur noch main und hauszähler löschen.
        2026-01-22 12_25_58-Baum_Wasser.jpg

        1 Antwort Letzte Antwort
        0
        • S Offline
          S Offline
          Sammydk
          schrieb am zuletzt editiert von Sammydk
          #117

          Hallo, hier noch mal 5 Warnmeldungen direkt nach dem Start.
          2026-01-22 12_59_38-warnmeldungen nach start.jpg

          fischi87F 1 Antwort Letzte Antwort
          0
          • fischi87F fischi87

            @Sammydk

            Hier kann ich dir nicht ganz folgen, du musst ja nicht Main verwenden, die kannst doch dem 1. Zähler „Frischwasser“geben und dem 2. „Abwasser“ im total wird dann alles zusammen gerechnet bezahlst ja auch beides. Du würdest es so wollen wasser.main.frischwasser, wasser.main.abwasser oder?

            M Offline
            M Offline
            MartyBr
            schrieb am zuletzt editiert von
            #118

            @fischi87
            Eine kurze Frage: Kann ich den Namen main umbenennen in Frischwasser, ohne das die Daten verloren gehen?

            Gruß
            Martin


            Intel NUCs mit Proxmox / Iobroker als VM unter Debian
            Raspeberry mit USB Leseköpfen für Smartmeter
            Homematic und Homematic IP

            fischi87F 1 Antwort Letzte Antwort
            0
            • fischi87F fischi87

              @Jan.S100

              Ich habe gerade schnell mal etwas angepasst an der Prüfung bezüglich number String Konvertierung. Schau dir das mal an, über die Katze nochmal drüber installieren!

              Sag bitte Bescheid

              J Offline
              J Offline
              Jan.S100
              schrieb am zuletzt editiert von
              #119

              @fischi87

              Läuft bei mir jetzt.
              Allerdings auch mit den Warnmeldungen die in Nachricht #111 angesprochen wurden.

              fischi87F 1 Antwort Letzte Antwort
              0
              • S Offline
                S Offline
                Sammydk
                schrieb am zuletzt editiert von Sammydk
                #120

                @fischi87
                Zum Thema Übersicht, hätte ich eine Anregung. Einen Reiter PV/Einspeisung benötigt man eigentlich nicht mehr, da es ja unter dem Reiter Strom alles abbildbar ist, was mit Strom zusammenhängt. Oder sind hier interne Adapterberechnungen evtl. anders, was ich bisher nicht erkennen kann?

                fischi87F 1 Antwort Letzte Antwort
                0
                • M MartyBr

                  @fischi87
                  Eine kurze Frage: Kann ich den Namen main umbenennen in Frischwasser, ohne das die Daten verloren gehen?

                  fischi87F Online
                  fischi87F Online
                  fischi87
                  schrieb am zuletzt editiert von
                  #121

                  @MartyBr

                  Migration wird nicht funktionieren da es neue datenpunkte erstellt. Aber yearly würde passen nur halt Daily und monthly nicht. Es wäre ein Versuch wert, den Ordner umzubenennen und in der config den selben Namen eintragen. Erst Ordner dann config, probier es aus, würde mich auch interessieren. Den Adapter vorher stoppen!

                  M 1 Antwort Letzte Antwort
                  0
                  • S Sammydk

                    Hallo, hier noch mal 5 Warnmeldungen direkt nach dem Start.
                    2026-01-22 12_59_38-warnmeldungen nach start.jpg

                    fischi87F Online
                    fischi87F Online
                    fischi87
                    schrieb am zuletzt editiert von
                    #122

                    @Sammydk

                    Kannst du bitte mal mit debug starten und mir das log zukommen lassen?

                    1 Antwort Letzte Antwort
                    0
                    • S Sammydk

                      @fischi87
                      Zum Thema Übersicht, hätte ich eine Anregung. Einen Reiter PV/Einspeisung benötigt man eigentlich nicht mehr, da es ja unter dem Reiter Strom alles abbildbar ist, was mit Strom zusammenhängt. Oder sind hier interne Adapterberechnungen evtl. anders, was ich bisher nicht erkennen kann?

                      fischi87F Online
                      fischi87F Online
                      fischi87
                      schrieb am zuletzt editiert von
                      #123

                      @Sammydk

                      Wäre eine Option aber so ist es übersichtlicher, bin ich der Meinung.

                      1 Antwort Letzte Antwort
                      0
                      • J Jan.S100

                        @fischi87

                        Läuft bei mir jetzt.
                        Allerdings auch mit den Warnmeldungen die in Nachricht #111 angesprochen wurden.

                        fischi87F Online
                        fischi87F Online
                        fischi87
                        schrieb am zuletzt editiert von
                        #124

                        @Jan.S100

                        Würdest du mir das debug log mal schicken?

                        J 1 Antwort Letzte Antwort
                        0
                        • S Offline
                          S Offline
                          Sammydk
                          schrieb am zuletzt editiert von
                          #125

                          Anbei der aktuelle Adapterstart~16:10 in der Handballpause
                          Adapter_start_debug_16-10.txt

                          fischi87F 1 Antwort Letzte Antwort
                          0
                          • S Sammydk

                            Anbei der aktuelle Adapterstart~16:10 in der Handballpause
                            Adapter_start_debug_16-10.txt

                            fischi87F Online
                            fischi87F Online
                            fischi87
                            schrieb am zuletzt editiert von fischi87
                            #126

                            @Sammydk

                            Schick mir bitte mal deine config von zb Gas!?

                            Ich sehe in deinem log das der yearly immer 0 ist und das kann ja nicht sein 😉 jetzt forschen wir nach dem Grund…..

                            1 Antwort Letzte Antwort
                            0
                            • fischi87F fischi87

                              @MartyBr

                              Migration wird nicht funktionieren da es neue datenpunkte erstellt. Aber yearly würde passen nur halt Daily und monthly nicht. Es wäre ein Versuch wert, den Ordner umzubenennen und in der config den selben Namen eintragen. Erst Ordner dann config, probier es aus, würde mich auch interessieren. Den Adapter vorher stoppen!

                              M Offline
                              M Offline
                              MartyBr
                              schrieb am zuletzt editiert von
                              #127

                              @fischi87
                              Ich konnte den Ordner auch mit eingeschalteten Admnmodus nicht umbenennen. Ich habe daher einen neuen Ordner angelegt.

                              Gruß
                              Martin


                              Intel NUCs mit Proxmox / Iobroker als VM unter Debian
                              Raspeberry mit USB Leseköpfen für Smartmeter
                              Homematic und Homematic IP

                              1 Antwort Letzte Antwort
                              0
                              • fischi87F fischi87

                                @Jan.S100

                                Würdest du mir das debug log mal schicken?

                                J Offline
                                J Offline
                                Jan.S100
                                schrieb am zuletzt editiert von
                                #128

                                @fischi87

                                2026-01-22 16:55:44.396 - info: host.DXP2800-F426 instance system.adapter.utility-monitor.0 in version "1.4.6" (non-npm: fischi87/ioBroker.utility-monitor#ececf3a786b5def21cf7cd38523dd2bc76dfb587) started with pid 34168
                                2026-01-22 16:55:45.108 - debug: utility-monitor.0 (34168) Redis Objects: Use Redis connection: 127.0.0.1:9001
                                2026-01-22 16:55:45.134 - debug: utility-monitor.0 (34168) Objects client ready ... initialize now
                                2026-01-22 16:55:45.135 - debug: utility-monitor.0 (34168) Objects create System PubSub Client
                                2026-01-22 16:55:45.136 - debug: utility-monitor.0 (34168) Objects create User PubSub Client
                                2026-01-22 16:55:45.168 - debug: utility-monitor.0 (34168) Objects client initialize lua scripts
                                2026-01-22 16:55:45.171 - debug: utility-monitor.0 (34168) Objects connected to redis: 127.0.0.1:9001
                                2026-01-22 16:55:45.193 - debug: utility-monitor.0 (34168) Redis States: Use Redis connection: 127.0.0.1:9000
                                2026-01-22 16:55:45.203 - debug: utility-monitor.0 (34168) States create System PubSub Client
                                2026-01-22 16:55:45.204 - debug: utility-monitor.0 (34168) States create User PubSub Client
                                2026-01-22 16:55:45.266 - debug: utility-monitor.0 (34168) States connected to redis: 127.0.0.1:9000
                                2026-01-22 16:55:45.383 - info: utility-monitor.0 (34168) starting. Version 1.4.6 (non-npm: fischi87/ioBroker.utility-monitor#ececf3a786b5def21cf7cd38523dd2bc76dfb587) in /opt/iobroker/node_modules/iobroker.utility-monitor, node: v22.22.0, js-controller: 7.1.0
                                2026-01-22 16:55:45.393 - info: utility-monitor.0 (34168) Nebenkosten-Monitor starting...
                                2026-01-22 16:55:45.394 - info: utility-monitor.0 (34168) Initializing gas monitoring...
                                2026-01-22 16:55:45.394 - debug: utility-monitor.0 (34168) Using sensor datapoint for gas: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                2026-01-22 16:55:45.394 - info: utility-monitor.0 (34168) gas: Managed with contract start: 13.11.2025
                                2026-01-22 16:55:45.394 - debug: utility-monitor.0 (34168) gas sensor will be subscribed by MultiMeterManager: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                2026-01-22 16:55:45.395 - info: utility-monitor.0 (34168) Initializing 1 meter(s) for gas
                                2026-01-22 16:55:45.395 - info: utility-monitor.0 (34168) Initializing gas meter: Gas
                                2026-01-22 16:55:45.424 - debug: utility-monitor.0 (34168) Meter state structure created for gas.gas
                                2026-01-22 16:55:45.424 - debug: utility-monitor.0 (34168) Using sensor datapoint for gas.gas: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                2026-01-22 16:55:45.424 - info: utility-monitor.0 (34168) gas.gas: Contract start: 13.11.2025
                                2026-01-22 16:55:45.481 - debug: utility-monitor.0 (34168) Subscribed to gas.gas sensor: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                2026-01-22 16:55:45.493 - debug: utility-monitor.0 (34168) gas.gas: Restored last sensor value: 56316.65
                                2026-01-22 16:55:45.539 - debug: utility-monitor.0 (34168) Sensor update for gas.gas: 5165.83
                                2026-01-22 16:55:45.540 - debug: utility-monitor.0 (34168) [gas.gas] Sensor update: raw=5165.83, offset=0
                                2026-01-22 16:55:45.595 - debug: utility-monitor.0 (34168) [gas.gas] Cost update: daily=56316.65, monthly=56316.65, yearly=3704.745508595999, price=0.1173
                                2026-01-22 16:55:45.610 - debug: utility-monitor.0 (34168) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=469.88, balance=109.88
                                2026-01-22 16:55:45.624 - info: utility-monitor.0 (34168) Init yearly gas.gas: 3704.75 kWh = 339.83 m³
                                2026-01-22 16:55:45.655 - debug: utility-monitor.0 (34168) [gas.gas] Billing countdown: contractStart=13.11.2025, daysRemaining=295, periodEnd=12.11.2026
                                2026-01-22 16:55:45.662 - debug: utility-monitor.0 (34168) [gas.gas] Cost update: daily=56316.65, monthly=56316.65, yearly=3704.745508595999, price=0.1173
                                2026-01-22 16:55:45.676 - debug: utility-monitor.0 (34168) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=469.88, balance=109.88
                                2026-01-22 16:55:45.683 - debug: utility-monitor.0 (34168) Meter initialization completed for gas.gas
                                2026-01-22 16:55:45.688 - warn: utility-monitor.0 (34168) State "utility-monitor.0.gas.Gas.consumption.yearlyVolume" has no existing object, this might lead to an error in future versions
                                2026-01-22 16:55:45.733 - info: utility-monitor.0 (34168) Init yearly gas: 3704.75 kWh = 339.83 m³ (current: 5165.83 m³, initial: 4826 m³)
                                2026-01-22 16:55:45.736 - warn: utility-monitor.0 (34168) State "utility-monitor.0.gas.Gas.consumption.yearly" has no existing object, this might lead to an error in future versions
                                2026-01-22 16:55:45.791 - debug: utility-monitor.0 (34168) [gas.gas] Cost update: daily=56316.65, monthly=56316.65, yearly=3704.745508595999, price=0.1173
                                2026-01-22 16:55:45.809 - debug: utility-monitor.0 (34168) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=469.88, balance=109.88
                                2026-01-22 16:55:45.815 - debug: utility-monitor.0 (34168) Initial cost calculation completed for gas
                                2026-01-22 16:55:45.815 - debug: utility-monitor.0 (34168) water monitoring is disabled
                                2026-01-22 16:55:45.831 - debug: utility-monitor.0 (34168) State structure deleted for water
                                2026-01-22 16:55:45.831 - info: utility-monitor.0 (34168) Initializing electricity monitoring...
                                2026-01-22 16:55:45.831 - debug: utility-monitor.0 (34168) Using sensor datapoint for electricity: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                2026-01-22 16:55:45.831 - info: utility-monitor.0 (34168) electricity: Managed with contract start: 13.11.2025
                                2026-01-22 16:55:45.831 - debug: utility-monitor.0 (34168) electricity sensor will be subscribed by MultiMeterManager: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                2026-01-22 16:55:45.831 - info: utility-monitor.0 (34168) Initializing 1 meter(s) for electricity
                                2026-01-22 16:55:45.831 - info: utility-monitor.0 (34168) Initializing electricity meter: main
                                2026-01-22 16:55:45.841 - debug: utility-monitor.0 (34168) Meter state structure created for electricity.main
                                2026-01-22 16:55:45.841 - debug: utility-monitor.0 (34168) Using sensor datapoint for electricity.main: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                2026-01-22 16:55:45.841 - info: utility-monitor.0 (34168) electricity.main: Contract start: 13.11.2025
                                2026-01-22 16:55:45.888 - debug: utility-monitor.0 (34168) Subscribed to electricity.main sensor: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                2026-01-22 16:55:45.890 - debug: utility-monitor.0 (34168) electricity.main: Restored last sensor value: 1470.7
                                2026-01-22 16:55:45.893 - debug: utility-monitor.0 (34168) Sensor update for electricity.main: 1470.7
                                2026-01-22 16:55:45.893 - debug: utility-monitor.0 (34168) [electricity.main] Sensor update: raw=1470.7, offset=0
                                2026-01-22 16:55:45.943 - debug: utility-monitor.0 (34168) [electricity.main] Cost update: daily=4.56, monthly=1470.7, yearly=423.70000000000005, price=0.3403
                                2026-01-22 16:55:45.956 - debug: utility-monitor.0 (34168) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=172.69, balance=-67.31
                                2026-01-22 16:55:45.967 - info: utility-monitor.0 (34168) Init yearly electricity.main: 423.70
                                2026-01-22 16:55:45.973 - debug: utility-monitor.0 (34168) [electricity.main] Billing countdown: contractStart=13.11.2025, daysRemaining=295, periodEnd=12.11.2026
                                2026-01-22 16:55:45.980 - debug: utility-monitor.0 (34168) [electricity.main] Cost update: daily=4.56, monthly=1470.7, yearly=423.70000000000005, price=0.3403
                                2026-01-22 16:55:46.004 - debug: utility-monitor.0 (34168) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=172.69, balance=-67.31
                                2026-01-22 16:55:46.013 - debug: utility-monitor.0 (34168) Meter initialization completed for electricity.main
                                2026-01-22 16:55:46.031 - info: utility-monitor.0 (34168) Init yearly electricity: 423.70 (current: 1470.70, initial: 1047)
                                2026-01-22 16:55:46.036 - debug: utility-monitor.0 (34168) [electricity.main] Cost update: daily=4.56, monthly=1470.7, yearly=423.70000000000005, price=0.3403
                                2026-01-22 16:55:46.050 - debug: utility-monitor.0 (34168) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=172.69, balance=-67.31
                                2026-01-22 16:55:46.054 - debug: utility-monitor.0 (34168) Initial cost calculation completed for electricity
                                2026-01-22 16:55:46.055 - debug: utility-monitor.0 (34168) pv monitoring is disabled
                                2026-01-22 16:55:46.067 - debug: utility-monitor.0 (34168) State structure deleted for pv
                                
                                fischi87F 1 Antwort Letzte Antwort
                                0
                                • J Jan.S100

                                  @fischi87

                                  2026-01-22 16:55:44.396 - info: host.DXP2800-F426 instance system.adapter.utility-monitor.0 in version "1.4.6" (non-npm: fischi87/ioBroker.utility-monitor#ececf3a786b5def21cf7cd38523dd2bc76dfb587) started with pid 34168
                                  2026-01-22 16:55:45.108 - debug: utility-monitor.0 (34168) Redis Objects: Use Redis connection: 127.0.0.1:9001
                                  2026-01-22 16:55:45.134 - debug: utility-monitor.0 (34168) Objects client ready ... initialize now
                                  2026-01-22 16:55:45.135 - debug: utility-monitor.0 (34168) Objects create System PubSub Client
                                  2026-01-22 16:55:45.136 - debug: utility-monitor.0 (34168) Objects create User PubSub Client
                                  2026-01-22 16:55:45.168 - debug: utility-monitor.0 (34168) Objects client initialize lua scripts
                                  2026-01-22 16:55:45.171 - debug: utility-monitor.0 (34168) Objects connected to redis: 127.0.0.1:9001
                                  2026-01-22 16:55:45.193 - debug: utility-monitor.0 (34168) Redis States: Use Redis connection: 127.0.0.1:9000
                                  2026-01-22 16:55:45.203 - debug: utility-monitor.0 (34168) States create System PubSub Client
                                  2026-01-22 16:55:45.204 - debug: utility-monitor.0 (34168) States create User PubSub Client
                                  2026-01-22 16:55:45.266 - debug: utility-monitor.0 (34168) States connected to redis: 127.0.0.1:9000
                                  2026-01-22 16:55:45.383 - info: utility-monitor.0 (34168) starting. Version 1.4.6 (non-npm: fischi87/ioBroker.utility-monitor#ececf3a786b5def21cf7cd38523dd2bc76dfb587) in /opt/iobroker/node_modules/iobroker.utility-monitor, node: v22.22.0, js-controller: 7.1.0
                                  2026-01-22 16:55:45.393 - info: utility-monitor.0 (34168) Nebenkosten-Monitor starting...
                                  2026-01-22 16:55:45.394 - info: utility-monitor.0 (34168) Initializing gas monitoring...
                                  2026-01-22 16:55:45.394 - debug: utility-monitor.0 (34168) Using sensor datapoint for gas: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                  2026-01-22 16:55:45.394 - info: utility-monitor.0 (34168) gas: Managed with contract start: 13.11.2025
                                  2026-01-22 16:55:45.394 - debug: utility-monitor.0 (34168) gas sensor will be subscribed by MultiMeterManager: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                  2026-01-22 16:55:45.395 - info: utility-monitor.0 (34168) Initializing 1 meter(s) for gas
                                  2026-01-22 16:55:45.395 - info: utility-monitor.0 (34168) Initializing gas meter: Gas
                                  2026-01-22 16:55:45.424 - debug: utility-monitor.0 (34168) Meter state structure created for gas.gas
                                  2026-01-22 16:55:45.424 - debug: utility-monitor.0 (34168) Using sensor datapoint for gas.gas: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                  2026-01-22 16:55:45.424 - info: utility-monitor.0 (34168) gas.gas: Contract start: 13.11.2025
                                  2026-01-22 16:55:45.481 - debug: utility-monitor.0 (34168) Subscribed to gas.gas sensor: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                  2026-01-22 16:55:45.493 - debug: utility-monitor.0 (34168) gas.gas: Restored last sensor value: 56316.65
                                  2026-01-22 16:55:45.539 - debug: utility-monitor.0 (34168) Sensor update for gas.gas: 5165.83
                                  2026-01-22 16:55:45.540 - debug: utility-monitor.0 (34168) [gas.gas] Sensor update: raw=5165.83, offset=0
                                  2026-01-22 16:55:45.595 - debug: utility-monitor.0 (34168) [gas.gas] Cost update: daily=56316.65, monthly=56316.65, yearly=3704.745508595999, price=0.1173
                                  2026-01-22 16:55:45.610 - debug: utility-monitor.0 (34168) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=469.88, balance=109.88
                                  2026-01-22 16:55:45.624 - info: utility-monitor.0 (34168) Init yearly gas.gas: 3704.75 kWh = 339.83 m³
                                  2026-01-22 16:55:45.655 - debug: utility-monitor.0 (34168) [gas.gas] Billing countdown: contractStart=13.11.2025, daysRemaining=295, periodEnd=12.11.2026
                                  2026-01-22 16:55:45.662 - debug: utility-monitor.0 (34168) [gas.gas] Cost update: daily=56316.65, monthly=56316.65, yearly=3704.745508595999, price=0.1173
                                  2026-01-22 16:55:45.676 - debug: utility-monitor.0 (34168) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=469.88, balance=109.88
                                  2026-01-22 16:55:45.683 - debug: utility-monitor.0 (34168) Meter initialization completed for gas.gas
                                  2026-01-22 16:55:45.688 - warn: utility-monitor.0 (34168) State "utility-monitor.0.gas.Gas.consumption.yearlyVolume" has no existing object, this might lead to an error in future versions
                                  2026-01-22 16:55:45.733 - info: utility-monitor.0 (34168) Init yearly gas: 3704.75 kWh = 339.83 m³ (current: 5165.83 m³, initial: 4826 m³)
                                  2026-01-22 16:55:45.736 - warn: utility-monitor.0 (34168) State "utility-monitor.0.gas.Gas.consumption.yearly" has no existing object, this might lead to an error in future versions
                                  2026-01-22 16:55:45.791 - debug: utility-monitor.0 (34168) [gas.gas] Cost update: daily=56316.65, monthly=56316.65, yearly=3704.745508595999, price=0.1173
                                  2026-01-22 16:55:45.809 - debug: utility-monitor.0 (34168) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=469.88, balance=109.88
                                  2026-01-22 16:55:45.815 - debug: utility-monitor.0 (34168) Initial cost calculation completed for gas
                                  2026-01-22 16:55:45.815 - debug: utility-monitor.0 (34168) water monitoring is disabled
                                  2026-01-22 16:55:45.831 - debug: utility-monitor.0 (34168) State structure deleted for water
                                  2026-01-22 16:55:45.831 - info: utility-monitor.0 (34168) Initializing electricity monitoring...
                                  2026-01-22 16:55:45.831 - debug: utility-monitor.0 (34168) Using sensor datapoint for electricity: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                  2026-01-22 16:55:45.831 - info: utility-monitor.0 (34168) electricity: Managed with contract start: 13.11.2025
                                  2026-01-22 16:55:45.831 - debug: utility-monitor.0 (34168) electricity sensor will be subscribed by MultiMeterManager: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                  2026-01-22 16:55:45.831 - info: utility-monitor.0 (34168) Initializing 1 meter(s) for electricity
                                  2026-01-22 16:55:45.831 - info: utility-monitor.0 (34168) Initializing electricity meter: main
                                  2026-01-22 16:55:45.841 - debug: utility-monitor.0 (34168) Meter state structure created for electricity.main
                                  2026-01-22 16:55:45.841 - debug: utility-monitor.0 (34168) Using sensor datapoint for electricity.main: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                  2026-01-22 16:55:45.841 - info: utility-monitor.0 (34168) electricity.main: Contract start: 13.11.2025
                                  2026-01-22 16:55:45.888 - debug: utility-monitor.0 (34168) Subscribed to electricity.main sensor: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                  2026-01-22 16:55:45.890 - debug: utility-monitor.0 (34168) electricity.main: Restored last sensor value: 1470.7
                                  2026-01-22 16:55:45.893 - debug: utility-monitor.0 (34168) Sensor update for electricity.main: 1470.7
                                  2026-01-22 16:55:45.893 - debug: utility-monitor.0 (34168) [electricity.main] Sensor update: raw=1470.7, offset=0
                                  2026-01-22 16:55:45.943 - debug: utility-monitor.0 (34168) [electricity.main] Cost update: daily=4.56, monthly=1470.7, yearly=423.70000000000005, price=0.3403
                                  2026-01-22 16:55:45.956 - debug: utility-monitor.0 (34168) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=172.69, balance=-67.31
                                  2026-01-22 16:55:45.967 - info: utility-monitor.0 (34168) Init yearly electricity.main: 423.70
                                  2026-01-22 16:55:45.973 - debug: utility-monitor.0 (34168) [electricity.main] Billing countdown: contractStart=13.11.2025, daysRemaining=295, periodEnd=12.11.2026
                                  2026-01-22 16:55:45.980 - debug: utility-monitor.0 (34168) [electricity.main] Cost update: daily=4.56, monthly=1470.7, yearly=423.70000000000005, price=0.3403
                                  2026-01-22 16:55:46.004 - debug: utility-monitor.0 (34168) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=172.69, balance=-67.31
                                  2026-01-22 16:55:46.013 - debug: utility-monitor.0 (34168) Meter initialization completed for electricity.main
                                  2026-01-22 16:55:46.031 - info: utility-monitor.0 (34168) Init yearly electricity: 423.70 (current: 1470.70, initial: 1047)
                                  2026-01-22 16:55:46.036 - debug: utility-monitor.0 (34168) [electricity.main] Cost update: daily=4.56, monthly=1470.7, yearly=423.70000000000005, price=0.3403
                                  2026-01-22 16:55:46.050 - debug: utility-monitor.0 (34168) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=172.69, balance=-67.31
                                  2026-01-22 16:55:46.054 - debug: utility-monitor.0 (34168) Initial cost calculation completed for electricity
                                  2026-01-22 16:55:46.055 - debug: utility-monitor.0 (34168) pv monitoring is disabled
                                  2026-01-22 16:55:46.067 - debug: utility-monitor.0 (34168) State structure deleted for pv
                                  
                                  fischi87F Online
                                  fischi87F Online
                                  fischi87
                                  schrieb am zuletzt editiert von
                                  #129

                                  @Jan.S100 @sammydk

                                  was mir auffällt, bei Jan geht strom aber bei Sammy nicht. macht al bitte folgendes. Adapter stop. unter Objekte den Objektbaum utility-monitor komplett löschen und den Adapter neu starten ob der Fehler dann immer noch besteht. danke

                                  1 Antwort Letzte Antwort
                                  0
                                  • S Offline
                                    S Offline
                                    Sammydk
                                    schrieb am zuletzt editiert von Sammydk
                                    #130

                                    So habe den Fehler mit der Jahresberechnung gefunden. Er rührt daher, dass ich zum aktuellen Zählerstand/Datum den gleichen Wert im Offset stehen hatte. Ich wollte damit erreichen das der Zähler bei 0 beginnt. Ohne Offset wird das Jahr berechnet. Dennoch erhalte ich 5 Warnmeldungen von jedem eingetragenen Adapter beim Start.
                                    Die Zählerwerte sind zum Teil berechnet und zum Teil direkt aus den Systemen. Alle sind vom Typ number.
                                    Hier noch mal die WARN Meldungen:
                                    0
                                    5
                                    Log-Größe: 80.7 KB

                                    utility-monitor.0
                                    Zeit
                                    warn
                                    Nachricht

                                    utility-monitor.0
                                    2026-01-22 20:03:23.510 warn State "utility-monitor.0.pv.Exportzaehler_280.consumption.yearly" has no existing object, this might lead to an error in future versions
                                    
                                    utility-monitor.0
                                    2026-01-22 20:03:23.179 warn State "utility-monitor.0.electricity.Importzaehler_180.consumption.yearly" has no existing object, this might lead to an error in future versions
                                    
                                    utility-monitor.0
                                    2026-01-22 20:03:22.827 warn State "utility-monitor.0.water.Frischwasser.consumption.yearly" has no existing object, this might lead to an error in future versions
                                    
                                    utility-monitor.0
                                    2026-01-22 20:03:22.239 warn State "utility-monitor.0.gas.Hauszaehler.consumption.yearly" has no existing object, this might lead to an error in future versions
                                    
                                    utility-monitor.0
                                    2026-01-22 20:03:22.194 warn State "utility-monitor.0.gas.Hauszaehler.consumption.yearlyVolume" has no existing object, this might lead to an error in future versions
                                    

                                    Die Adapterkonfigurationen kann ich erst morgen schicken.

                                    fischi87F 1 Antwort Letzte Antwort
                                    0
                                    • S Sammydk

                                      So habe den Fehler mit der Jahresberechnung gefunden. Er rührt daher, dass ich zum aktuellen Zählerstand/Datum den gleichen Wert im Offset stehen hatte. Ich wollte damit erreichen das der Zähler bei 0 beginnt. Ohne Offset wird das Jahr berechnet. Dennoch erhalte ich 5 Warnmeldungen von jedem eingetragenen Adapter beim Start.
                                      Die Zählerwerte sind zum Teil berechnet und zum Teil direkt aus den Systemen. Alle sind vom Typ number.
                                      Hier noch mal die WARN Meldungen:
                                      0
                                      5
                                      Log-Größe: 80.7 KB

                                      utility-monitor.0
                                      Zeit
                                      warn
                                      Nachricht

                                      utility-monitor.0
                                      2026-01-22 20:03:23.510 warn State "utility-monitor.0.pv.Exportzaehler_280.consumption.yearly" has no existing object, this might lead to an error in future versions
                                      
                                      utility-monitor.0
                                      2026-01-22 20:03:23.179 warn State "utility-monitor.0.electricity.Importzaehler_180.consumption.yearly" has no existing object, this might lead to an error in future versions
                                      
                                      utility-monitor.0
                                      2026-01-22 20:03:22.827 warn State "utility-monitor.0.water.Frischwasser.consumption.yearly" has no existing object, this might lead to an error in future versions
                                      
                                      utility-monitor.0
                                      2026-01-22 20:03:22.239 warn State "utility-monitor.0.gas.Hauszaehler.consumption.yearly" has no existing object, this might lead to an error in future versions
                                      
                                      utility-monitor.0
                                      2026-01-22 20:03:22.194 warn State "utility-monitor.0.gas.Hauszaehler.consumption.yearlyVolume" has no existing object, this might lead to an error in future versions
                                      

                                      Die Adapterkonfigurationen kann ich erst morgen schicken.

                                      fischi87F Online
                                      fischi87F Online
                                      fischi87
                                      schrieb am zuletzt editiert von
                                      #131

                                      @Sammydk

                                      bitte immer ein debug und bitte in code tags oder wieder als .txt!

                                      wie vorhin geschrieben ist es komisch warum es bei @jan.s100 zumindest ström funktioniert. ich konnte, egal wie den fehler noch nicht reproduzieren. habe selbst eine weitere test Instanz installiert. Hast du den adapter mal gestoppt und den Objektbaum komplett gelöscht und den adapter wieder gestartet?

                                      1 Antwort Letzte Antwort
                                      0
                                      • J Offline
                                        J Offline
                                        Jan.S100
                                        schrieb am zuletzt editiert von
                                        #132

                                        Hier mein Debug Log

                                        2026-01-22 22:27:17.766 - info: host.DXP2800-F426 instance system.adapter.utility-monitor.0 in version "1.4.6" (non-npm: fischi87/ioBroker.utility-monitor#ececf3a786b5def21cf7cd38523dd2bc76dfb587) started with pid 50881
                                        2026-01-22 22:27:18.476 - debug: utility-monitor.0 (50881) Redis Objects: Use Redis connection: 127.0.0.1:9001
                                        2026-01-22 22:27:18.503 - debug: utility-monitor.0 (50881) Objects client ready ... initialize now
                                        2026-01-22 22:27:18.504 - debug: utility-monitor.0 (50881) Objects create System PubSub Client
                                        2026-01-22 22:27:18.505 - debug: utility-monitor.0 (50881) Objects create User PubSub Client
                                        2026-01-22 22:27:18.538 - debug: utility-monitor.0 (50881) Objects client initialize lua scripts
                                        2026-01-22 22:27:18.541 - debug: utility-monitor.0 (50881) Objects connected to redis: 127.0.0.1:9001
                                        2026-01-22 22:27:18.563 - debug: utility-monitor.0 (50881) Redis States: Use Redis connection: 127.0.0.1:9000
                                        2026-01-22 22:27:18.573 - debug: utility-monitor.0 (50881) States create System PubSub Client
                                        2026-01-22 22:27:18.574 - debug: utility-monitor.0 (50881) States create User PubSub Client
                                        2026-01-22 22:27:18.638 - debug: utility-monitor.0 (50881) States connected to redis: 127.0.0.1:9000
                                        2026-01-22 22:27:18.744 - info: utility-monitor.0 (50881) starting. Version 1.4.6 (non-npm: fischi87/ioBroker.utility-monitor#ececf3a786b5def21cf7cd38523dd2bc76dfb587) in /opt/iobroker/node_modules/iobroker.utility-monitor, node: v22.22.0, js-controller: 7.1.0
                                        2026-01-22 22:27:18.754 - info: utility-monitor.0 (50881) Nebenkosten-Monitor starting...
                                        2026-01-22 22:27:18.755 - info: utility-monitor.0 (50881) Initializing gas monitoring...
                                        2026-01-22 22:27:18.755 - debug: utility-monitor.0 (50881) Using sensor datapoint for gas: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                        2026-01-22 22:27:18.755 - info: utility-monitor.0 (50881) gas: Managed with contract start: 13.11.2025
                                        2026-01-22 22:27:18.755 - debug: utility-monitor.0 (50881) gas sensor will be subscribed by MultiMeterManager: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                        2026-01-22 22:27:18.756 - info: utility-monitor.0 (50881) Initializing 1 meter(s) for gas
                                        2026-01-22 22:27:18.757 - info: utility-monitor.0 (50881) Initializing gas meter: Gas
                                        2026-01-22 22:27:18.788 - debug: utility-monitor.0 (50881) Meter state structure created for gas.gas
                                        2026-01-22 22:27:18.789 - debug: utility-monitor.0 (50881) Using sensor datapoint for gas.gas: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                        2026-01-22 22:27:18.789 - info: utility-monitor.0 (50881) gas.gas: Contract start: 13.11.2025
                                        2026-01-22 22:27:18.839 - debug: utility-monitor.0 (50881) Subscribed to gas.gas sensor: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                        2026-01-22 22:27:18.851 - debug: utility-monitor.0 (50881) gas.gas: Restored last sensor value: 56330.49
                                        2026-01-22 22:27:18.899 - debug: utility-monitor.0 (50881) Sensor update for gas.gas: 5167.1
                                        2026-01-22 22:27:18.900 - debug: utility-monitor.0 (50881) [gas.gas] Sensor update: raw=5167.1, offset=0
                                        2026-01-22 22:27:18.955 - debug: utility-monitor.0 (50881) [gas.gas] Cost update: daily=56330.49, monthly=56330.49, yearly=3718.590745320004, price=0.1173
                                        2026-01-22 22:27:18.969 - debug: utility-monitor.0 (50881) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=471.50, balance=111.50
                                        2026-01-22 22:27:18.982 - info: utility-monitor.0 (50881) Init yearly gas.gas: 3718.59 kWh = 341.10 m³
                                        2026-01-22 22:27:19.014 - debug: utility-monitor.0 (50881) [gas.gas] Billing countdown: contractStart=13.11.2025, daysRemaining=295, periodEnd=12.11.2026
                                        2026-01-22 22:27:19.028 - debug: utility-monitor.0 (50881) [gas.gas] Cost update: daily=56330.49, monthly=56330.49, yearly=3718.590745320004, price=0.1173
                                        2026-01-22 22:27:19.044 - debug: utility-monitor.0 (50881) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=471.50, balance=111.50
                                        2026-01-22 22:27:19.048 - debug: utility-monitor.0 (50881) Meter initialization completed for gas.gas
                                        2026-01-22 22:27:19.052 - warn: utility-monitor.0 (50881) State "utility-monitor.0.gas.Gas.consumption.yearlyVolume" has no existing object, this might lead to an error in future versions
                                        2026-01-22 22:27:19.097 - info: utility-monitor.0 (50881) Init yearly gas: 3718.59 kWh = 341.10 m³ (current: 5167.10 m³, initial: 4826 m³)
                                        2026-01-22 22:27:19.100 - warn: utility-monitor.0 (50881) State "utility-monitor.0.gas.Gas.consumption.yearly" has no existing object, this might lead to an error in future versions
                                        2026-01-22 22:27:19.154 - debug: utility-monitor.0 (50881) [gas.gas] Cost update: daily=56330.49, monthly=56330.49, yearly=3718.590745320004, price=0.1173
                                        2026-01-22 22:27:19.171 - debug: utility-monitor.0 (50881) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=471.50, balance=111.50
                                        2026-01-22 22:27:19.177 - debug: utility-monitor.0 (50881) Initial cost calculation completed for gas
                                        2026-01-22 22:27:19.177 - debug: utility-monitor.0 (50881) water monitoring is disabled
                                        2026-01-22 22:27:19.193 - debug: utility-monitor.0 (50881) State structure deleted for water
                                        2026-01-22 22:27:19.194 - info: utility-monitor.0 (50881) Initializing electricity monitoring...
                                        2026-01-22 22:27:19.194 - debug: utility-monitor.0 (50881) Using sensor datapoint for electricity: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                        2026-01-22 22:27:19.194 - info: utility-monitor.0 (50881) electricity: Managed with contract start: 13.11.2025
                                        2026-01-22 22:27:19.194 - debug: utility-monitor.0 (50881) electricity sensor will be subscribed by MultiMeterManager: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                        2026-01-22 22:27:19.194 - info: utility-monitor.0 (50881) Initializing 1 meter(s) for electricity
                                        2026-01-22 22:27:19.194 - info: utility-monitor.0 (50881) Initializing electricity meter: main
                                        2026-01-22 22:27:19.205 - debug: utility-monitor.0 (50881) Meter state structure created for electricity.main
                                        2026-01-22 22:27:19.205 - debug: utility-monitor.0 (50881) Using sensor datapoint for electricity.main: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                        2026-01-22 22:27:19.205 - info: utility-monitor.0 (50881) electricity.main: Contract start: 13.11.2025
                                        2026-01-22 22:27:19.251 - debug: utility-monitor.0 (50881) Subscribed to electricity.main sensor: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                        2026-01-22 22:27:19.293 - debug: utility-monitor.0 (50881) electricity.main: Restored last sensor value: 1472.24
                                        2026-01-22 22:27:19.299 - debug: utility-monitor.0 (50881) Sensor update for electricity.main: 1472.24
                                        2026-01-22 22:27:19.299 - debug: utility-monitor.0 (50881) [electricity.main] Sensor update: raw=1472.24, offset=0
                                        2026-01-22 22:27:19.355 - debug: utility-monitor.0 (50881) [electricity.main] Cost update: daily=1472.24, monthly=1472.24, yearly=425.24, price=0.3403
                                        2026-01-22 22:27:19.370 - debug: utility-monitor.0 (50881) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=173.21, balance=-66.79
                                        2026-01-22 22:27:19.381 - info: utility-monitor.0 (50881) Init yearly electricity.main: 425.24
                                        2026-01-22 22:27:19.389 - debug: utility-monitor.0 (50881) [electricity.main] Billing countdown: contractStart=13.11.2025, daysRemaining=295, periodEnd=12.11.2026
                                        2026-01-22 22:27:19.396 - debug: utility-monitor.0 (50881) [electricity.main] Cost update: daily=1472.24, monthly=1472.24, yearly=425.24, price=0.3403
                                        2026-01-22 22:27:19.414 - debug: utility-monitor.0 (50881) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=173.21, balance=-66.79
                                        2026-01-22 22:27:19.419 - debug: utility-monitor.0 (50881) Meter initialization completed for electricity.main
                                        2026-01-22 22:27:19.421 - info: utility-monitor.0 (50881) Init yearly electricity: 425.24 (current: 1472.24, initial: 1047)
                                        2026-01-22 22:27:19.426 - debug: utility-monitor.0 (50881) [electricity.main] Cost update: daily=1472.24, monthly=1472.24, yearly=425.24, price=0.3403
                                        2026-01-22 22:27:19.439 - debug: utility-monitor.0 (50881) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=173.21, balance=-66.79
                                        2026-01-22 22:27:19.444 - debug: utility-monitor.0 (50881) Initial cost calculation completed for electricity
                                        2026-01-22 22:27:19.444 - debug: utility-monitor.0 (50881) pv monitoring is disabled
                                        2026-01-22 22:27:19.456 - debug: utility-monitor.0 (50881) State structure deleted for pv
                                        2026-01-22 22:27:19.468 - info: utility-monitor.0 (50881) Nebenkosten-Monitor initialized successfully
                                        
                                        1 Antwort Letzte Antwort
                                        0
                                        • J Offline
                                          J Offline
                                          Jan.S100
                                          schrieb am zuletzt editiert von
                                          #133

                                          Und hier nach löschen des Objektbaums.

                                          2026-01-22 22:31:48.313 - info: host.DXP2800-F426 instance system.adapter.utility-monitor.0 in version "1.4.6" (non-npm: fischi87/ioBroker.utility-monitor#ececf3a786b5def21cf7cd38523dd2bc76dfb587) started with pid 51129
                                          2026-01-22 22:31:49.025 - debug: utility-monitor.0 (51129) Redis Objects: Use Redis connection: 127.0.0.1:9001
                                          2026-01-22 22:31:49.057 - debug: utility-monitor.0 (51129) Objects client ready ... initialize now
                                          2026-01-22 22:31:49.058 - debug: utility-monitor.0 (51129) Objects create System PubSub Client
                                          2026-01-22 22:31:49.058 - debug: utility-monitor.0 (51129) Objects create User PubSub Client
                                          2026-01-22 22:31:49.104 - debug: utility-monitor.0 (51129) Objects client initialize lua scripts
                                          2026-01-22 22:31:49.107 - debug: utility-monitor.0 (51129) Objects connected to redis: 127.0.0.1:9001
                                          2026-01-22 22:31:49.130 - debug: utility-monitor.0 (51129) Redis States: Use Redis connection: 127.0.0.1:9000
                                          2026-01-22 22:31:49.140 - debug: utility-monitor.0 (51129) States create System PubSub Client
                                          2026-01-22 22:31:49.141 - debug: utility-monitor.0 (51129) States create User PubSub Client
                                          2026-01-22 22:31:49.201 - debug: utility-monitor.0 (51129) States connected to redis: 127.0.0.1:9000
                                          2026-01-22 22:31:49.314 - info: utility-monitor.0 (51129) starting. Version 1.4.6 (non-npm: fischi87/ioBroker.utility-monitor#ececf3a786b5def21cf7cd38523dd2bc76dfb587) in /opt/iobroker/node_modules/iobroker.utility-monitor, node: v22.22.0, js-controller: 7.1.0
                                          2026-01-22 22:31:49.325 - info: utility-monitor.0 (51129) Nebenkosten-Monitor starting...
                                          2026-01-22 22:31:49.325 - info: utility-monitor.0 (51129) Initializing gas monitoring...
                                          2026-01-22 22:31:49.326 - debug: utility-monitor.0 (51129) Using sensor datapoint for gas: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                          2026-01-22 22:31:49.326 - info: utility-monitor.0 (51129) gas: Managed with contract start: 13.11.2025
                                          2026-01-22 22:31:49.326 - debug: utility-monitor.0 (51129) gas sensor will be subscribed by MultiMeterManager: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                          2026-01-22 22:31:49.327 - info: utility-monitor.0 (51129) Initializing 1 meter(s) for gas
                                          2026-01-22 22:31:49.327 - info: utility-monitor.0 (51129) Initializing gas meter: Gas
                                          2026-01-22 22:31:49.683 - debug: utility-monitor.0 (51129) Meter state structure created for gas.gas
                                          2026-01-22 22:31:49.684 - debug: utility-monitor.0 (51129) Using sensor datapoint for gas.gas: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                          2026-01-22 22:31:49.684 - info: utility-monitor.0 (51129) gas.gas: Contract start: 13.11.2025
                                          2026-01-22 22:31:49.742 - debug: utility-monitor.0 (51129) Subscribed to gas.gas sensor: alias.0.Wohnung.Keller.Gaszähler.gasVolume
                                          2026-01-22 22:31:49.755 - debug: utility-monitor.0 (51129) gas.gas: Restored last sensor value: 0
                                          2026-01-22 22:31:49.806 - debug: utility-monitor.0 (51129) Sensor update for gas.gas: 5167.1
                                          2026-01-22 22:31:49.807 - debug: utility-monitor.0 (51129) [gas.gas] Sensor update: raw=5167.1, offset=0
                                          2026-01-22 22:31:49.866 - debug: utility-monitor.0 (51129) gas.gas delta: 56330.49
                                          2026-01-22 22:31:49.907 - debug: utility-monitor.0 (51129) [gas.gas] Cost update: daily=56330.49, monthly=56330.49, yearly=3718.59, price=0.1173
                                          2026-01-22 22:31:49.925 - debug: utility-monitor.0 (51129) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=1, basicCharge=0.00, annualFee=0.00, paidTotal=120.00, totalYearly=436.19, balance=316.19
                                          2026-01-22 22:31:49.946 - info: utility-monitor.0 (51129) Init yearly gas.gas: 3718.59 kWh = 341.10 m³
                                          2026-01-22 22:31:49.978 - debug: utility-monitor.0 (51129) [gas.gas] Billing countdown: contractStart=13.11.2025, daysRemaining=295, periodEnd=12.11.2026
                                          2026-01-22 22:31:49.985 - debug: utility-monitor.0 (51129) [gas.gas] Cost update: daily=56330.49, monthly=56330.49, yearly=3718.590745320004, price=0.1173
                                          2026-01-22 22:31:49.998 - debug: utility-monitor.0 (51129) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=471.50, balance=111.50
                                          2026-01-22 22:31:50.003 - debug: utility-monitor.0 (51129) Meter initialization completed for gas.gas
                                          2026-01-22 22:31:50.006 - warn: utility-monitor.0 (51129) State "utility-monitor.0.gas.Gas.consumption.yearlyVolume" has no existing object, this might lead to an error in future versions
                                          2026-01-22 22:31:50.052 - info: utility-monitor.0 (51129) Init yearly gas: 3718.59 kWh = 341.10 m³ (current: 5167.10 m³, initial: 4826 m³)
                                          2026-01-22 22:31:50.055 - warn: utility-monitor.0 (51129) State "utility-monitor.0.gas.Gas.consumption.yearly" has no existing object, this might lead to an error in future versions
                                          2026-01-22 22:31:50.107 - debug: utility-monitor.0 (51129) [gas.gas] Cost update: daily=56330.49, monthly=56330.49, yearly=3718.590745320004, price=0.1173
                                          2026-01-22 22:31:50.121 - debug: utility-monitor.0 (51129) [gas.gas] Balance calculation: grundgebuehr=11.7708, jahresgebuehr=0, abschlag=120, months=3, basicCharge=35.31, annualFee=0.00, paidTotal=360.00, totalYearly=471.50, balance=111.50
                                          2026-01-22 22:31:50.127 - debug: utility-monitor.0 (51129) Initial cost calculation completed for gas
                                          2026-01-22 22:31:50.127 - debug: utility-monitor.0 (51129) water monitoring is disabled
                                          2026-01-22 22:31:50.140 - debug: utility-monitor.0 (51129) State structure deleted for water
                                          2026-01-22 22:31:50.140 - info: utility-monitor.0 (51129) Initializing electricity monitoring...
                                          2026-01-22 22:31:50.140 - debug: utility-monitor.0 (51129) Using sensor datapoint for electricity: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                          2026-01-22 22:31:50.140 - info: utility-monitor.0 (51129) electricity: Managed with contract start: 13.11.2025
                                          2026-01-22 22:31:50.140 - debug: utility-monitor.0 (51129) electricity sensor will be subscribed by MultiMeterManager: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                          2026-01-22 22:31:50.140 - info: utility-monitor.0 (51129) Initializing 1 meter(s) for electricity
                                          2026-01-22 22:31:50.141 - info: utility-monitor.0 (51129) Initializing electricity meter: main
                                          2026-01-22 22:31:50.430 - debug: utility-monitor.0 (51129) Meter state structure created for electricity.main
                                          2026-01-22 22:31:50.430 - debug: utility-monitor.0 (51129) Using sensor datapoint for electricity.main: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                          2026-01-22 22:31:50.430 - info: utility-monitor.0 (51129) electricity.main: Contract start: 13.11.2025
                                          2026-01-22 22:31:50.484 - debug: utility-monitor.0 (51129) Subscribed to electricity.main sensor: alias.0.Wohnung.Keller.Stromzähler.energyCounterTwo
                                          2026-01-22 22:31:50.486 - debug: utility-monitor.0 (51129) electricity.main: Restored last sensor value: 0
                                          2026-01-22 22:31:50.489 - debug: utility-monitor.0 (51129) Sensor update for electricity.main: 1472.24
                                          2026-01-22 22:31:50.490 - debug: utility-monitor.0 (51129) [electricity.main] Sensor update: raw=1472.24, offset=0
                                          2026-01-22 22:31:50.539 - debug: utility-monitor.0 (51129) electricity.main delta: 1472.24
                                          2026-01-22 22:31:50.550 - debug: utility-monitor.0 (51129) [electricity.main] Cost update: daily=1472.24, monthly=1472.24, yearly=425.24, price=0.3403
                                          2026-01-22 22:31:50.563 - debug: utility-monitor.0 (51129) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=1, basicCharge=0.00, annualFee=0.00, paidTotal=80.00, totalYearly=144.71, balance=64.71
                                          2026-01-22 22:31:50.601 - info: utility-monitor.0 (51129) Init yearly electricity.main: 425.24
                                          2026-01-22 22:31:50.616 - debug: utility-monitor.0 (51129) [electricity.main] Billing countdown: contractStart=13.11.2025, daysRemaining=295, periodEnd=12.11.2026
                                          2026-01-22 22:31:50.625 - debug: utility-monitor.0 (51129) [electricity.main] Cost update: daily=1472.24, monthly=1472.24, yearly=425.24, price=0.3403
                                          2026-01-22 22:31:50.644 - debug: utility-monitor.0 (51129) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=173.21, balance=-66.79
                                          2026-01-22 22:31:50.649 - debug: utility-monitor.0 (51129) Meter initialization completed for electricity.main
                                          2026-01-22 22:31:50.651 - info: utility-monitor.0 (51129) Init yearly electricity: 425.24 (current: 1472.24, initial: 1047)
                                          2026-01-22 22:31:50.656 - debug: utility-monitor.0 (51129) [electricity.main] Cost update: daily=1472.24, monthly=1472.24, yearly=425.24, price=0.3403
                                          2026-01-22 22:31:50.672 - debug: utility-monitor.0 (51129) [electricity.main] Balance calculation: grundgebuehr=9.5, jahresgebuehr=0, abschlag=80, months=3, basicCharge=28.50, annualFee=0.00, paidTotal=240.00, totalYearly=173.21, balance=-66.79
                                          2026-01-22 22:31:50.678 - debug: utility-monitor.0 (51129) Initial cost calculation completed for electricity
                                          2026-01-22 22:31:50.678 - debug: utility-monitor.0 (51129) pv monitoring is disabled
                                          2026-01-22 22:31:50.690 - debug: utility-monitor.0 (51129) State structure deleted for pv
                                          2026-01-22 22:31:50.746 - info: utility-monitor.0 (51129) Nebenkosten-Monitor initialized successfully
                                          
                                          fischi87F 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          478

                                          Online

                                          32.6k

                                          Benutzer

                                          82.2k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe