Betatest NSPanel-lovelace-ui v0.7.x

lobomau

Ich versuche gerade den Umstieg vom Script v5.0.0.1 auf den Adapter v0.9.1.
Ich bin da wo man das Script anpassen muss und wollte wissen ob es bisher normal ist, dass im Adapter das NSPanel als offline angezeigt wird. Ich kann über die Objekte des Adapters die beiden Schalter schalten und ich komme auf die Tasmota-Seite drauf, sprich das NSPanel ist nicht offline:

ticaki

Du müsstes das Skript starten - so wie es ist. Glaube ich...

Offline bedeutet, dass zum Zeitpunkt des aktualisierens dieser Tabelle keine mqtt kommunikation mit dem TFT stattgefunden hat.

EDIT:
Beim Adapterstart sollte da aber stehen ob für jedes panel ein skript gefunden wurde.
Da ist auch ne Warnung dabei No script config found for ${a.topic}

EDIT2: dann sollte da aber Missing configuration! stehen und nicht offline

@tt-tom helf mir mal :D

TT-Tom

@ticaki
@lobomau

wäre mal interessant was in der Tasmotakonsole kommt, wenn das Panel startet. Kannst du bitte mal das log posten. Welche TFT Version hast du aktuell installiert?

ticaki

@lobomau
Logauszug incl. start wäre auch wichtig.

lobomau

@TT-Tom sagte in Betatest NSPanel-lovelace-ui v0.7.x:

TFT Version hast du aktuell installiert?

Sieht ja erstmal so aus als hätte ich kein TFT installiert!? Wo könnte ich es ablesen?

Ich habe das NSPanel neu geflashed und den Adapter drüber laufen lassen. Zuvor dachte ich kurz während der Umstellung von Script auf Adapter ich hätte das NSPanel zerstört nachdem der Bildschirm schwarz blieb. Nach dem mehrmaligen Flashen lief es dann wieder. Bekomme aktuell den Service-Bildschirm angezeigt.
Log liefere ich wenn ich zu Hause bin und das Panel wieder in Betrieb nehme.

13patrick37

@armilar Ist es möglich, die Hue Lichtszenen einzubinden, ähnlich wie beim Skript:
https://github.com/joBr99/nspanel-lovelace-ui/wiki/ioBroker-ALIAS-Definitionen#hue-licht-channel-hue

Habe im Wiki nichts dazu gefunden. Danke dir

lobomau

@TT-Tom

Tasmotakonsole nach Anschalten Panel:

00:00:00.003 HDW: ESP32-D0WD-V3 v3.1 (PSRAM)
00:00:00.039 UFS: FlashFS mounted with 308 kB free
00:00:00.054 CFG: Loaded from File, Count 32
00:00:00.062 QPC: Count 1
00:00:00.122 BRY: Berry initialized, RAM used 3766 bytes
00:00:00.143 Project tasmota - Tasmota Version 15.2.0.2(5680069-nspanel)-3.3.5(2026-01-07T13:56:55)
00:00:01.149 WIF: Connecting to AP1 Sorocaba Channel 1 BSSId F0:9F:C2:F7:9B:60 in mode HT20 as NSPanelOG...
00:00:03.840 WIF: Connected
00:00:04.986 HTP: Web server active on NSPanelOG with IP address 192.168.1.164
00:00:08.132 QPC: Reset
00:00:09.178 MQT: Attempting connection...
00:00:10.348 MQT: TLS connected in 1168 ms, stack low mark 2280
00:00:10.349 MQT: Connected
00:00:10.355 MQT: NSPanel/OG/tele/LWT = Online (retained)
00:00:10.359 MQT: NSPanel/OG/cmnd/POWER = 
00:00:10.367 MQT: NSPanel/OG/tele/INFO1 = {"Info1":{"Module":"NSPanelOG","Version":"15.2.0.2(5680069-nspanel)","FallbackTopic":"cmnd/NSPanelOG-1D3968_fb/","GroupTopic":"NSPanel/OG/cmnd/"}}
00:00:10.385 MQT: NSPanel/OG/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"NSPanelOG","IPAddress":"192.168.1.164","IP6Global":"fd5a:8fd2:ee86:44c:e665:b8ff:fe1d:3968","IP6Local":"fe80::e665:b8ff:fe1d:3968%st2"}}
00:00:10.410 MQT: NSPanel/OG/tele/INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":10}}
00:00:10.416 MQT: NSPanel/OG/stat/RESULT = {"POWER1":"OFF"}
00:00:10.419 MQT: NSPanel/OG/stat/POWER1 = OFF
00:00:10.422 MQT: NSPanel/OG/stat/RESULT = {"POWER2":"OFF"}
00:00:10.435 MQT: NSPanel/OG/stat/POWER2 = OFF
00:00:12.665 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}
00:00:15.376 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}
00:00:16.426 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}
00:00:16.461 MQT: NSPanel/OG/tele/STATE = {"Time":"1970-01-01T00:00:16","Uptime":"0T00:00:13","UptimeSec":13,"Heap":121,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":1104,"MqttCount":1,"Berry":{"HeapUsed":4,"Objects":46},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Sorocaba","BSSId":"F0:9F:C2:F7:9B:60","Channel":1,"Mode":"HT20","RSSI":100,"Signal":-50,"LinkCount":1,"Downtime":"0T00:00:03"},"Hostname":"NSPanelOG","IPAddress":"192.168.1.164"}
00:00:16.511 MQT: NSPanel/OG/tele/SENSOR = {"Time":"1970-01-01T00:00:16","ANALOG":{"Temperature1":-6.3},"TempUnit":"C"}
00:00:17.555 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}
00:00:19.827 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}
00:00:27.546 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}
00:00:29.684 MQT: NSPanel/OG/stat/STATUS0 = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["NSPanelOG","Tasmota2"],"Topic":"tasmota_1D3968","ButtonTopic":"0","Power":"00","PowerLock":"00","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0},"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota32/release/tasmota32-nspanel.bin","RestartReason":"Vbat power on reset","Uptime":"0T00:00:24","StartupUTC":"","Sleep":50,"CfgHolder":4617,"BootCount":10,"BCResetTime":"1970-01-01T00:00:00","SaveCount":33},"StatusFWR":{"Version":"15.2.0.2(5680069-nspanel)","BuildDateTime":"2026-01-07T13:56:55","Core":"3.3.5","SDK":"5.3.4.251223","CpuFrequency":160,"Hardware":"ESP32-D0WD-V3 v3.1","CR":"517/699"},"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"FileLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Sorocaba",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","20206000","00044000","00000000"]},"StatusMEM":{"ProgramSize":2068,"Free":811,"Heap":118,"StackLowMark":2,"PsrMax":2048,"PsrFree":2037,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"1640C8","FlashFrequency":40,"FlashMode":"DIO","Features":["0809","9F9AD7DF","0015A001","B7F7BFCF","05DA9BC4","E0360DC7","480840D2","20200000","D4BC482D","810A80F1","00000814"],"Drivers":"1,2,!3,!4,!5,7,!8,9,10,11,12,!14,!16,!17,!20,!21,24,26,!27,29,!34,!35,38,50,52,!59,!60,62,!63,!66,!67,!68,!73,!75,82,!86,!87,!88,!91,!121","Sensors":"1,2,3,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,64,66,67,74,85,92,95,98,103,105,109,127","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,58,62,65,69,76,77,82,89"},"StatusNET":{"Hostname":"NSPanelOG","IPAddress":"192.168.1.164","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.1.1","DNSServer2":"8.8.8.8","Mac":"E4:65:B8:1D:39:68","IP6Global":"fd5a:8fd2:ee86:44c:e665:b8ff:fe1d:3968","IP6Local":"fe80::e665:b8ff:fe1d:3968%st2","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"192.168.1.1","DNSServer2":"8.8.8.8","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":16.0},"StatusMQT":{"MqttHost":"192.168.1.19","MqttPort":8883,"MqttClientMask":"NSPanelOG-1D3968","MqttClient":"NSPanelOG-1D3968","MqttUser":"ceASHxzZGaPOqiX","MqttCount":1,"MqttTLS":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4},"StatusTIM":{"UTC":"1970-01-01T00:00:29Z","Local":"1970-01-01T00:00:29","StartDST":"1970-01-01T00:00:00","EndDST":"1970-01-01T00:00:00","Timezone":"+00:00","Sunrise":"20:13","Sunset":"05:47"},"StatusSNS":{"Time":"1970-01-01T00:00:29","ANALOG":{"Temperature1":-6.3},"TempUnit":"C"},"StatusSTS":{"Time":"1970-01-01T00:00:29","Uptime":"0T00:00:24","UptimeSec":24,"Heap":117,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":1602,"MqttCount":1,"Berry":{"HeapUsed":4,"Objects":46},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Sorocaba","BSSId":"F0:9F:C2:F7:9B:60","Channel":1,"Mode":"HT20","RSSI":100,"Signal":-50,"LinkCount":1,"Downtime":"0T00:00:03"},"Hostname":"NSPanelOG","IPAddress":"192.168.1.164"}}
00:00:35.673 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}
00:00:46.605 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}
00:00:59.619 MQT: NSPanel/OG/stat/RESULT = {"Command":"Unknown","Input":"CUSTOMSEND pageType~pageStartup"}

Adapter-log:


nspanel-lovelace-ui.0
2026-01-08 18:57:43.714	info	[NSPanelOG] Setting panel to offline until first message!

nspanel-lovelace-ui.0
2026-01-08 18:57:42.295	info	[mqttServer] MQTT server started and listening on port 8883

nspanel-lovelace-ui.0
2026-01-08 18:57:42.121	info	Detailed configuration checks are suppressed here. Full validation output is only shown when the configuration script is sent to the adapter.

nspanel-lovelace-ui.0
2026-01-08 18:57:42.121	info	Found 1 script configs for topics: NSPanel/OG

nspanel-lovelace-ui.0
2026-01-08 18:57:42.120	info	Configured panels: name#topic -> [NSPanelOG#NSPanel/OG]

nspanel-lovelace-ui.0
2026-01-08 18:57:42.078	info	starting. Version 0.9.1 in /opt/iobroker/node_modules/iobroker.nspanel-lovelace-ui, node: v22.21.0, js-controller: 7.0.7

nspanel-lovelace-ui.0
2026-01-08 18:57:37.043	info	terminating

nspanel-lovelace-ui.0
2026-01-08 18:57:36.786	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

nspanel-lovelace-ui.0
2026-01-08 18:57:36.786	info	terminating

nspanel-lovelace-ui.0
2026-01-08 18:57:36.781	info	[mqttClient] MQTT connection closed.

nspanel-lovelace-ui.0
2026-01-08 18:57:36.684	info	[NSPanelOG] Goint offline because delete panel!

nspanel-lovelace-ui.0
2026-01-08 18:57:36.539	info	Got terminate signal TERMINATE_YOURSELF

ticaki

sieht aus als wenn du das berryscript per hand gelöscht / geleert hast.

TT-Tom

@ticaki

Hast du den Zeitstempel gesehen 1.1.70 00:00:00

Ist doch nicht normal, oder???

lobomau

@ticaki @tt-tom Sorry! Eben habe ich mich an den Vorfall vor ca. 6 Monaten erinnert. Ich habe im unifi den NSpanels den Zugang zum Internet verweigert. Trotz des Flashs war das Gerät gesperrt. Nun hat es sofort funktioniert. Panel zeigt sofort die Uhrzeit an. Toller Adapter! Echt einfach die erste Einrichtung. Nun geht es ans Script :-)

ticaki

@13patrick37

Ich selber habe keine Lampensteuerung jedoch sollte lt. code.

modelist: wie im Skript

inSel_Alias: muß auf einem Datenpunkt zeigen der beschreibbar ist und vom Typ string

Das hab ich aus dem Code, ist viel zulange her das ich das Programmiert habe und nutze es selbst nicht. Vielleicht kann @tt-tom das mal testen.

Armilar

@ticaki
@13patrick37

ich hätte hier 2 Beispiele:

{ 
                    id: 'alias.0.Haus.Obergeschoss.Schlafzimmer_2.Licht.Tradfri_GU10_3', 
                    name: 'RGB Hex (CT=Mired)', // RGBsingle Channel - IKEA Tradfri GU10 über zigbee.0 - Color-Temperature in Mired
                    icon: 'lightbulb-on',
                    icon2: 'lightbulb-outline',
                    offColor: Off,
                    minValueColorTemp: 500, // Mired = Warmweiß = 1.000.000 / 2000 K = 500 Mired
                    maxValueColorTemp: 153, // Mired = Kaltweiß = 1.000.000 / 6536 K = 153 Mired
                    interpolateColor: true, 
                    inSel_Alias: 'alias.0.Haus.Obergeschoss.Schlafzimmer_2.Licht.Tradfri_GU10_3.VALUE',
                    inSel_ChoiceState: true 
                },
                { 
                    id: 'alias.0.Haus.Erdgeschoss.Wohnzimmer.Licht.E14_Fenster_Mitte_RGB', 
                    name: 'RGB (CT=Mired)', // RGB Channel - E14 Livarno Home Color über zigbee.0 - Color-Temperature in Mired
                    icon: 'lightbulb-on',
                    icon2: 'lightbulb-outline',
                    offColor: Off,
                    minValueColorTemp: 500, // Mired = Warmweiß = 1.000.000 / 2000 K = 500 Mired
                    maxValueColorTemp: 153, // Mired = Kaltweiß = 1.000.000 / 6536 K = 153 Mired
                    interpolateColor: true, 
                    modeList: ["blink","breathe","okay","channel_change","finish_effect","stop_effect","colorloop","stop_colorloop"], 
                    inSel_ChoiceState: true 
                },

Der erste mit inSel_Alias und der zweite mit modeList

TT-Tom

@Armilar
Für die modeList braucht man ein MODE Datenpunkt im Alias oder wo schreibt er die Rückgabe hin. Sollte eine Zahl sein die zurückkommt, wenn ich mich richtig erinnere.

TT-Tom

@lobomau hast du dich verklickt bei meinem Post oder wo ist das Problem.

ticaki

Ich sehe im Code nicht das ein Datenpunkt MODE benutzt wird

inSel_ChoiceState wird im Adapter nicht verwendet - ist nur als kompatibilität in den types

EDIT: hab das mal im Code vermerkt: inSel_ChoiceState?: boolean; //deprecated

TT-Tom

@ticaki

dann wäre jetzt die Frage, wo schreibt die modeList dann zurück.

EDIT: ich teste das mal mit @13patrick37 zusammen. danke

Community Forum

NEWS

Betatest NSPanel-lovelace-ui v0.7.x

Support us

361

32.6k

82.0k

1.3m