Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[HeiLuRa]

Hallo Black Thunder, vielen Danke erstmal für den tollen Adapter. Ich habe bisher immer mit der Version von LoPablo gearbeitet.
Leider habe ich ein Problem Ich versuche die Schalter (unter ZigBee) ein- bzw. auszuschalten, indem ich diese alle 15s unter "setState(...)" ansprechen, aber funktioniert dieses nicht. Im Protokoll bekomme ich folgende Meldung: (Version: 1.2.0-alpha.0)
2026-01-07 14:50:03.853 warn Object of state "smartfriends.0.devices.6597.13631.control" is missing the required property "common.type"
2026-01-07 14:50:19.139 warn Object of state "smartfriends.0.devices.6597.13631.control" is missing the required property "common.type"
2026-01-07 14:50:34.270 warn Object of state "smartfriends.0.devices.6597.13631.control" is missing the required property "common.type"
2026-01-07 14:50:49.309 warn Object of state "smartfriends.0.devices.6597.13631.control" is missing the required property "common.type"

Habe ich etwas falsch gemacht?

[Black Thunder]

@HeiLuRa Sind denn unter "smartfriends.0.devices.6597.13631.control" überhaupt States angelegt worden? Da müsste es sowas wie "on", "off" und "toggle" geben. "control" ist ja erstmal nur der übergeordnete Channel und ist selbst nicht schaltbar.
Welche Version verwendest du? Nach einem Upgrade auf die aktuelle 1.2.0-alpha.0 solltest du einmalig den Objektbaum löschen, damit er korrekt neu angelegt werden kann.

Ansonsten bitte ein vollständiges Debug-Log nach Adapterstart hochladen.

[wak]

@Black-Thunder

Hallo Dominik,
ich versuche gerade als "ioBroker-Beginner" Deinen SmartFriends Adapter zum Laufen zu bringen, scheitere aber leider schon am Anfang.
Der Adapter läuft im ioBroker (wird als Status grün angezeigt), es werden aber keine Objekte aus der Smart Friends Box geladen und im Log werden Fehler gesetzt ?!
Hast Du einen Tipp ?

Grüße
Mario

MOD-Edit
Link entfernt - Inhalt s. Post #34

[Samson71]

@wak
Bitte entferne den Link (was immer Du darin zeigen willst) bzw. pack dessen Inhalt lesbar direkt in den Post.

[Black Thunder]

@wak Hallo Mario, auch hier bitte ein vollständiges Debug-Log (im Admin Expertenmodus aktivieren -> Instanzen -> smartfriends.0 aufklappen -> Log-Stufe von "Info" auf "Debug" stellen).

So wie es aber bisher aussieht, schlägt einfach die Verbindung zur SmartFriendsBox fehl (Connection failed: "timeout"). Stimmt die IP-Adresse sicher, die im Adapter konfiguriert ist?

[wak]

@Black-Thunder
Moin,
ja, die IP ist korrekt.
Die Box läuft auch, nur die Verbindung zum Remote-Server schlägt ja bekanntermaßen fehl.
Das Log stammt jetzt von einem zweiten Rechner im gleichen Netz, alternativ auch mit anderem Benutzer, aber auch hier gibt es keine Verbindung zur Box.

2026-01-08 11:05:17.479 - debug: smartfriends.0 (23914) Message received: success (code: 1)
2026-01-08 11:05:17.480 - debug: smartfriends.0 (23914) Updated timestamp to Sun Feb 08 2026 11:05:15 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 11:05:21.176 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:05:21.178 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:05:26.179 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:05:26.180 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:05:31.182 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:05:31.183 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:05:36.185 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:05:36.185 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:05:41.187 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:05:41.188 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:05:46.189 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:05:46.190 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:05:47.024 - debug: smartfriends.0 (23914) Received data: { "error" : { "message" : "Connection timed out", "responseCode" : 87 } }
2026-01-08 11:05:47.024 - debug: smartfriends.0 (23914) Message received: Connection timed out (code: 87)
2026-01-08 11:05:47.025 - debug: smartfriends.0 (23914) Received data: { "currentTimestamp" : 20260108110551, "response" : { "remoteHomeActivated" : true, "remoteHomeStatus" : "notConnected" }, "responseCode" : 1, "responseMessage" : "success" }
2026-01-08 11:05:47.025 - debug: smartfriends.0 (23914) Message received: success (code: 1)
2026-01-08 11:05:47.026 - debug: smartfriends.0 (23914) Updated timestamp to Sun Feb 08 2026 11:05:51 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 11:05:47.026 - debug: smartfriends.0 (23914) Received data: { "response" : { "type" : "error" }, "responseCode" : 15, "responseMessage" : "Die Smart Friends Box kann sich mit dem RemoteHome Server nicht verbinden.\n\n\u00dcberpr\u00fcfen Sie bitte, ob die Smart Friends Box mit dem Internet verbunden ist." }
2026-01-08 11:05:47.026 - debug: smartfriends.0 (23914) Message received: Die Smart Friends Box kann sich mit dem RemoteHome Server nicht verbinden.
Überprüfen Sie bitte, ob die Smart Friends Box mit dem Internet verbunden ist. (code: 15)
2026-01-08 11:05:51.190 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:05:51.191 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:05:56.193 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:05:56.193 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:01.196 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:01.197 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:06.198 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:06.199 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:11.200 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:11.201 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:16.202 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:16.202 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:21.203 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:21.204 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:26.205 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:26.206 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:31.207 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:31.208 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:36.208 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:36.209 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:41.210 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:41.211 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:41.319 - debug: smartfriends.0 (23914) Received data: { "currentTimestamp" : 20260108110645, "response" : { "counter" : 263312, "debugName" : "Multisensor SHBW10000:${Temperature}", "deviceID" : 8082, "masterDeviceID" : 12827, "normValue" : 18.500, "value" : 18.500, "valueTimestamp" : 20260108110645 }, "responseCode" : 2, "responseMessage" : "newDeviceValue" }
2026-01-08 11:06:41.320 - debug: smartfriends.0 (23914) Message received: newDeviceValue (code: 2)
2026-01-08 11:06:41.321 - debug: smartfriends.0 (23914) Updated timestamp to Sun Feb 08 2026 11:06:45 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 11:06:41.322 - debug: smartfriends.0 (23914) Device value update: deviceID=8082, value=18.5
2026-01-08 11:06:41.323 - debug: smartfriends.0 (23914) Received value for unknown device 8082, ignoring.
2026-01-08 11:06:46.213 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:46.214 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:51.214 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:51.214 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:06:56.215 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:06:56.216 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:01.218 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:01.219 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:06.220 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:06.221 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:11.221 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:11.222 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:16.223 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:16.224 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:21.224 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:21.225 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:26.226 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:26.227 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:31.227 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:31.228 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:36.230 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:36.230 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:41.232 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:41.232 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:46.233 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:46.234 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:51.234 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:51.235 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:07:56.236 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:07:56.237 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:01.238 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:01.238 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:06.239 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:06.240 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:11.242 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:11.242 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:16.242 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:16.243 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:21.244 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:21.245 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:26.247 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:26.247 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:31.247 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:31.248 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:36.249 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:36.249 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:41.251 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:41.252 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:46.252 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:46.253 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:51.254 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:51.255 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:08:56.255 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:08:56.256 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:09:01.256 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:09:01.257 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:09:06.257 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:09:06.258 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:09:11.258 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:09:11.259 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:09:16.259 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:09:16.259 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:09:21.260 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:09:21.261 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:09:23.493 - debug: smartfriends.0 (23914) Received data: { "error" : { "message" : "Connection timed out", "responseCode" : 87 } }
2026-01-08 11:09:23.493 - debug: smartfriends.0 (23914) Message received: Connection timed out (code: 87)
2026-01-08 11:09:23.526 - debug: smartfriends.0 (23914) Received data: { "currentTimestamp" : 20260108110927, "response" : { "remoteHomeActivated" : true, "remoteHomeStatus" : "notConnected" }, "responseCode" : 1, "responseMessage" : "success" }
2026-01-08 11:09:23.527 - debug: smartfriends.0 (23914) Message received: success (code: 1)
2026-01-08 11:09:23.527 - debug: smartfriends.0 (23914) Updated timestamp to Sun Feb 08 2026 11:09:27 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 11:09:23.527 - debug: smartfriends.0 (23914) Received data: { "response" : { "type" : "error" }, "responseCode" : 15, "responseMessage" : "Die Smart Friends Box kann sich mit dem RemoteHome Server nicht verbinden.\n\n\u00dcberpr\u00fcfen Sie bitte, ob die Smart Friends Box mit dem Internet verbunden ist." }
2026-01-08 11:09:23.528 - debug: smartfriends.0 (23914) Message received: Die Smart Friends Box kann sich mit dem RemoteHome Server nicht verbinden.
Überprüfen Sie bitte, ob die Smart Friends Box mit dem Internet verbunden ist. (code: 15)
2026-01-08 11:09:26.261 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:09:26.261 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}
2026-01-08 11:09:31.261 - debug: smartfriends.0 (23914) Sending command with method: keepalive
2026-01-08 11:09:31.261 - debug: smartfriends.0 (23914) Send JSON: {"command":"keepalive"}

MOD-EDIT
Code in Code-Tags gesetzt

[Black Thunder]

@wak Ich brauche bitte ein vollständiges Log ab Adapter-Start. Hier fehlen die relevanten Informationen.

[Samson71]

@wak
Bitte setze Protokolle und Logs zur besseren Lesbarkeit zukünftig in Code-Tags </>. Ich habe das in dem Fall für Dich gemacht.

Ich erwarte auch auch noch eine Reaktion auf meine Anmerkung:

sagte in [Neuer Adapter] smartfriends:

Bitte entferne den Link (was immer Du darin zeigen willst) bzw. pack dessen Inhalt lesbar direkt in den Post.

Sonst lösche ich den stumpf den Link.

[wak]

@Black-Thunder

Hier nochmal das Log nachdem ich den Adapter nochmal komplett neu installiert (ich hoffe das psst so).
Hier taucht nun auch mal der Multisensor SHBW1000 auf, aber auch nur im Log, nicht unter Objekte. Also muß ja eine Verbindung zur Box bestehen ?!

2026-01-08 12:48:28.322 - debug: smartfriends.0 (1687) Message received: success (code: 1)
2026-01-08 12:48:28.324 - debug: smartfriends.0 (1687) Updated timestamp to Sun Feb 08 2026 12:48:22 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 12:48:32.128 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:48:32.129 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:48:37.130 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:48:37.131 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:48:42.131 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:48:42.131 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:48:47.132 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:48:47.133 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:48:52.142 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:48:52.143 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:48:57.144 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:48:57.145 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:02.146 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:02.147 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:07.148 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:07.148 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:12.149 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:12.151 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:17.156 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:17.157 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:22.157 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:22.157 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:27.158 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:27.159 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:32.159 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:32.160 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:33.408 - debug: smartfriends.0 (1687) Received data: { "error" : { "message" : "Connection timed out", "responseCode" : 87 } }
2026-01-08 12:49:33.410 - debug: smartfriends.0 (1687) Message received: Connection timed out (code: 87)
2026-01-08 12:49:33.413 - debug: smartfriends.0 (1687) Received data: { "currentTimestamp" : 20260108124933, "response" : { "remoteHomeActivated" : true, "remoteHomeStatus" : "notConnected" }, "responseCode" : 1, "responseMessage" : "success" }
2026-01-08 12:49:33.415 - debug: smartfriends.0 (1687) Message received: success (code: 1)
2026-01-08 12:49:33.415 - debug: smartfriends.0 (1687) Updated timestamp to Sun Feb 08 2026 12:49:33 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 12:49:33.416 - debug: smartfriends.0 (1687) Received data: { "response" : { "type" : "error" }, "responseCode" : 15, "responseMessage" : "Die Smart Friends Box kann sich mit dem RemoteHome Server nicht verbinden.\n\n\u00dcberpr\u00fcfen Sie bitte, ob die Smart Friends Box mit dem Internet verbunden ist." }
2026-01-08 12:49:33.418 - debug: smartfriends.0 (1687) Message received: Die Smart Friends Box kann sich mit dem RemoteHome Server nicht verbinden.
Überprüfen Sie bitte, ob die Smart Friends Box mit dem Internet verbunden ist. (code: 15)
2026-01-08 12:49:37.161 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:37.162 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:42.164 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:42.165 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:47.165 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:47.166 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:52.168 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:52.173 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:49:57.173 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:49:57.174 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:02.175 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:02.175 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:07.175 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:07.176 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:12.183 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:12.186 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:17.187 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:17.188 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:22.189 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:22.191 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:27.191 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:27.192 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:32.193 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:32.194 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:37.195 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:37.195 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:42.197 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:42.197 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:45.472 - debug: smartfriends.0 (1687) Received data: { "currentTimestamp" : 20260108125045, "response" : { "counter" : 263326, "debugName" : "Multisensor SHBW10000:${Temperature}", "deviceID" : 8082, "masterDeviceID" : 12827, "normValue" : 18.700, "value" : 18.700, "valueTimestamp" : 20260108125045 }, "responseCode" : 2, "responseMessage" : "newDeviceValue" }
2026-01-08 12:50:45.473 - debug: smartfriends.0 (1687) Message received: newDeviceValue (code: 2)
2026-01-08 12:50:45.473 - debug: smartfriends.0 (1687) Updated timestamp to Sun Feb 08 2026 12:50:45 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 12:50:45.474 - debug: smartfriends.0 (1687) Device value update: deviceID=8082, value=18.7
2026-01-08 12:50:45.474 - debug: smartfriends.0 (1687) Received value for unknown device 8082, ignoring.
2026-01-08 12:50:47.198 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:47.200 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:52.218 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:52.219 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:50:57.219 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:50:57.220 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:02.219 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:02.220 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:07.221 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:07.222 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:12.228 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:12.228 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:17.229 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:17.230 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:22.216 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:22.217 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:27.217 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:27.218 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:32.226 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:32.227 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:37.228 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:37.229 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:42.229 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:42.229 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:45.424 - debug: smartfriends.0 (1687) Received data: { "currentTimestamp" : 20260108125145, "response" : { "counter" : 263327, "debugName" : "Multisensor SHBW10000:${Temperature}", "deviceID" : 8082, "masterDeviceID" : 12827, "normValue" : 18.600, "value" : 18.600, "valueTimestamp" : 20260108125145 }, "responseCode" : 2, "responseMessage" : "newDeviceValue" }
2026-01-08 12:51:45.424 - debug: smartfriends.0 (1687) Message received: newDeviceValue (code: 2)
2026-01-08 12:51:45.425 - debug: smartfriends.0 (1687) Updated timestamp to Sun Feb 08 2026 12:51:45 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 12:51:45.426 - debug: smartfriends.0 (1687) Device value update: deviceID=8082, value=18.6
2026-01-08 12:51:45.426 - debug: smartfriends.0 (1687) Received value for unknown device 8082, ignoring.
2026-01-08 12:51:47.230 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:47.230 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:52.232 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:52.233 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:51:57.233 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:51:57.233 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:02.234 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:02.235 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:07.236 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:07.236 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:12.237 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:12.237 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:17.238 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:17.239 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:22.239 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:22.240 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:27.240 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:27.240 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:32.242 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:32.243 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:37.244 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:37.245 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:42.245 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:42.245 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:45.465 - debug: smartfriends.0 (1687) Received data: { "currentTimestamp" : 20260108125245, "response" : { "counter" : 263328, "debugName" : "Multisensor SHBW10000:${Temperature}", "deviceID" : 8082, "masterDeviceID" : 12827, "normValue" : 18.700, "value" : 18.700, "valueTimestamp" : 20260108125245 }, "responseCode" : 2, "responseMessage" : "newDeviceValue" }
2026-01-08 12:52:45.467 - debug: smartfriends.0 (1687) Message received: newDeviceValue (code: 2)
2026-01-08 12:52:45.467 - debug: smartfriends.0 (1687) Updated timestamp to Sun Feb 08 2026 12:52:45 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 12:52:45.468 - debug: smartfriends.0 (1687) Device value update: deviceID=8082, value=18.7
2026-01-08 12:52:45.468 - debug: smartfriends.0 (1687) Received value for unknown device 8082, ignoring.
2026-01-08 12:52:47.247 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:47.248 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:52.261 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:52.261 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:52:57.263 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:52:57.264 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:02.264 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:02.265 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:07.265 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:07.266 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:12.268 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:12.268 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:17.269 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:17.269 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:22.300 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:22.301 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:27.302 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:27.302 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:32.304 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:32.306 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:37.307 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:37.308 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:42.309 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:42.310 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:47.311 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:47.312 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:52.321 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:52.322 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:53:57.324 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:53:57.325 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:02.326 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:02.328 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:06.251 - debug: smartfriends.0 (1687) Received data: { "error" : { "message" : "Connection timed out", "responseCode" : 87 } }
2026-01-08 12:54:06.252 - debug: smartfriends.0 (1687) Message received: Connection timed out (code: 87)
2026-01-08 12:54:06.254 - debug: smartfriends.0 (1687) Received data: { "currentTimestamp" : 20260108125406, "response" : { "remoteHomeActivated" : true, "remoteHomeStatus" : "notConnected" }, "responseCode" : 1, "responseMessage" : "success" }
2026-01-08 12:54:06.255 - debug: smartfriends.0 (1687) Message received: success (code: 1)
2026-01-08 12:54:06.255 - debug: smartfriends.0 (1687) Updated timestamp to Sun Feb 08 2026 12:54:06 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 12:54:06.256 - debug: smartfriends.0 (1687) Received data: { "response" : { "type" : "error" }, "responseCode" : 15, "responseMessage" : "Die Smart Friends Box kann sich mit dem RemoteHome Server nicht verbinden.\n\n\u00dcberpr\u00fcfen Sie bitte, ob die Smart Friends Box mit dem Internet verbunden ist." }
2026-01-08 12:54:06.257 - debug: smartfriends.0 (1687) Message received: Die Smart Friends Box kann sich mit dem RemoteHome Server nicht verbinden.
Überprüfen Sie bitte, ob die Smart Friends Box mit dem Internet verbunden ist. (code: 15)
2026-01-08 12:54:07.328 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:07.329 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:12.330 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:12.331 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:17.332 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:17.333 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:22.334 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:22.335 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:27.334 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:27.335 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:32.336 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:32.337 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:37.338 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:37.339 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:42.339 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:42.340 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:45.571 - debug: smartfriends.0 (1687) Received data: { "currentTimestamp" : 20260108125445, "response" : { "counter" : 263329, "debugName" : "Multisensor SHBW10000:${Temperature}", "deviceID" : 8082, "masterDeviceID" : 12827, "normValue" : 18.600, "value" : 18.600, "valueTimestamp" : 20260108125445 }, "responseCode" : 2, "responseMessage" : "newDeviceValue" }
2026-01-08 12:54:45.572 - debug: smartfriends.0 (1687) Message received: newDeviceValue (code: 2)
2026-01-08 12:54:45.572 - debug: smartfriends.0 (1687) Updated timestamp to Sun Feb 08 2026 12:54:45 GMT+0100 (Mitteleuropäische Normalzeit)
2026-01-08 12:54:45.573 - debug: smartfriends.0 (1687) Device value update: deviceID=8082, value=18.6
2026-01-08 12:54:45.573 - debug: smartfriends.0 (1687) Received value for unknown device 8082, ignoring.
2026-01-08 12:54:47.340 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:47.341 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:52.342 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:52.343 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:54:57.344 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:54:57.345 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:55:02.346 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:55:02.347 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}
2026-01-08 12:55:07.348 - debug: smartfriends.0 (1687) Sending command with method: keepalive
2026-01-08 12:55:07.349 - debug: smartfriends.0 (1687) Send JSON: {"command":"keepalive"}

[wak]

@Samson71
Hallo,
der Link war das Log-File als html-Datei, welches ich dann im nächsten Post an Dominik "lesbar" gepostet habe.

[Black Thunder]

@wak sagte in [Neuer Adapter] smartfriends:

@Black-Thunder

Hier nochmal das Log nachdem ich den Adapter nochmal komplett neu installiert (ich hoffe das psst so).

Leider immer noch nicht komplett. Ich brauche alle Einträge ab dem Start des Adapters. Also ab der Zeile "instance system.adapter.smartfriends.0 in version "1.2.0-alpha.0" started with pid XXX". Es kann auch sein, dass du in der Admin-Oberfläche gar nicht alles siehst, weil bei Debug sehr viel geloggt wird.

Starte also den Adapter neu, warte 30 Sekunden, gehe im Admin auf "Protokolle" -> "Log herunterladen" -> "current" und kopiere da alle Einträge ab der genannten Zeile raus.

Hier taucht nun auch mal der Multisensor SHBW1000 auf, aber auch nur im Log, nicht unter Objekte. Also muß ja eine Verbindung zur Box bestehen ?!

Sieht so aus, aber das Gerät wird bisher noch ignoriert. Dazu brauche ich aber das ganze Log.

[wak]

@Black-Thunder sagte in [Neuer Adapter] smartfriends:

Also ab der Zeile "instance system.adapter.smartfriends.0 in version "1.2.0-alpha.0" started with pid XXX"

2026-01-08 14:10:01.503 - info: host.iobroker instance system.adapter.smartfriends.0 in version "1.2.0-alpha.0" started with pid 1012
2026-01-08 14:10:04.173 - debug: smartfriends.0 (1012) Redis Objects: Use Redis connection: 127.0.0.1:9001
2026-01-08 14:10:04.212 - debug: smartfriends.0 (1012) Objects client ready ... initialize now
2026-01-08 14:10:04.214 - debug: smartfriends.0 (1012) Objects create System PubSub Client
2026-01-08 14:10:04.215 - debug: smartfriends.0 (1012) Objects create User PubSub Client
2026-01-08 14:10:04.228 - debug: smartfriends.0 (1012) Objects client initialize lua scripts
2026-01-08 14:10:04.238 - debug: smartfriends.0 (1012) Objects connected to redis: 127.0.0.1:9001
2026-01-08 14:10:04.247 - debug: smartfriends.0 (1012) Redis States: Use Redis connection: 127.0.0.1:9000
2026-01-08 14:10:04.254 - debug: smartfriends.0 (1012) States create System PubSub Client
2026-01-08 14:10:04.255 - debug: smartfriends.0 (1012) States create User PubSub Client
2026-01-08 14:10:04.262 - debug: smartfriends.0 (1012) States connected to redis: 127.0.0.1:9000
2026-01-08 14:10:04.365 - info: smartfriends.0 (1012) starting. Version 1.2.0-alpha.0 in /opt/iobroker/node_modules/iobroker.smartfriends, node: v22.21.0, js-controller: 7.0.7
2026-01-08 14:10:04.382 - debug: smartfriends.0 (1012) Initializing objects...
2026-01-08 14:10:04.408 - debug: smartfriends.0 (1012) Checking adapter settings...
2026-01-08 14:10:04.409 - info: smartfriends.0 (1012) Connecting to gateway and retrieving data...
2026-01-08 14:10:04.409 - debug: smartfriends.0 (1012) IP: 192.168.178.33 - Port: 4300 - CSymbol: D19033i - SHCVersion: 3.7.4 - SHAPIVersion: 3.4
2026-01-08 14:10:04.410 - debug: smartfriends.0 (1012) Setting up socket...
2026-01-08 14:10:04.603 - debug: smartfriends.0 (1012) Cert issuer organization: enexoma AG
2026-01-08 14:10:04.604 - debug: smartfriends.0 (1012) Setting up socket events...
2026-01-08 14:10:04.604 - debug: smartfriends.0 (1012) Setup socket successfully
2026-01-08 14:10:04.605 - debug: smartfriends.0 (1012) Send and receive JSON: {"command":"helo","username":"ioBroker"}
2026-01-08 14:10:04.616 - debug: smartfriends.0 (1012) Received data: { "response" : { "majorApiVersion" : "3", "salt" : "MYRTCDlGvl9mjrVHWZ3EVUHdudM=", "sessionSalt" : "QmMkABafQL/xaBXC9r6D4L9FYT4=" }, "responseCode" : 1, "responseMessage" : "success" }
2026-01-08 14:10:04.617 - debug: smartfriends.0 (1012) Message received: success (code: 1)
2026-01-08 14:10:04.618 - debug: smartfriends.0 (1012) Send and receive JSON: {"command":"login","username":"ioBroker","digest":"RsoP7JZftLJKEgb0G52CUwLDSNE=","cSymbol":"D19033i","shcVersion":"3.7.4","shApiVersion":"3.4"}
2026-01-08 14:10:04.645 - debug: smartfriends.0 (1012) Received data: { "response" : { "environment" : { }, "hardware" : "SmartFriendsBox", "localSHServerTime" : "20260108141004+0100", "macAddress" : "8c:19:2d:60:23:25", "ownerSetup" : true, "pushNotificationUrl" : "https://live.ergyserver.de/eif/pn/registry/D19033/154039763346213", "remoteHome" : { "activated" : true, "status" : "notConnected", "url" : "rhlive.ergyserver.de" }, "sessionID" : "9ENSBjRLRYRYYFRrhM9D", "shsVersion" : "4.4.1-release", "user" : { "administratorRights" : true, "email" : "", "emailValidated" : false, "firstName" : "M", "gender" : "none", "id" : 35196, "lastName" : "M", "loginAllowedUntil" : 0, "mobileNo" : "", "name" : "ioBroker", "passwordValidity" : 4294967295, "settings" : { "backgroundSettings" : { } }, "username" : "ioBroker", "usertype" : "person", "wrappers" : [ 36928, 36000, 36001, 36002 ] }, "webshopUrl" : "https://shpportal.com/webshop-smartfriends.aspx?MAC=154039763346213" }, "responseCode" : 1, "responseMessage" : "success" }
2026-01-08 14:10:04.646 - debug: smartfriends.0 (1012) Message received: success (code: 1)
2026-01-08 14:10:04.647 - debug: smartfriends.0 (1012) Connection and login to gateway SmartFriendsBox successful.
2026-01-08 14:10:04.648 - info: smartfriends.0 (1012) Querying all devices...
2026-01-08 14:10:04.649 - debug: smartfriends.0 (1012) Send and receive JSON: {"command":"getAllNewInfos","timestamp":"0","compatibilityConfigurationVersion":"0","languageTranslationVersion":"0","sessionID":"9ENSBjRLRYRYYFRrhM9D"}
2026-01-08 14:10:09.650 - debug: smartfriends.0 (1012) Sending command with method: keepalive
2026-01-08 14:10:09.651 - debug: smartfriends.0 (1012) Send JSON: {"command":"keepalive"}
2026-01-08 14:10:09.653 - error: smartfriends.0 (1012) Connection failed: "timeout"

Die Einträge gehen dann zwar noch weiter, aber das sind mehr als die möglichen 1000 Zeichen...

[Black Thunder]

@wak Ja, genau das brauche ich, nur nicht als Screenshot. Stelle bitte das gesamte Log vollständig hier als .txt Datei zur Verfügung.

[wak]

@Black-Thunder

Ich hoffe das paßt so...
iobroker.txt

[Black Thunder]

@wak Ja, jetzt ist inhaltlich alles da. Auch wenn die Formatierung darin etwas wild ist 😉

Zu deinem Problem: Anscheinend war der Timeout beim initialen Abruf der Geräte etwas konservativ angesetzt. Ich habe das nun deutlich erhöht, so dass es bei dir ohne Fehler durchlaufen sollte und die Geräte als States auftauchen müssten. Probier es bitte mit v1.2.0-alpha.1.

[wak]

@Black-Thunder
Wir sind einen Schritt weiter ... 👍
Im Log stehen jetzt die Rohrmotoren u.s.w., aber unter Objekte finde immer noch keine Einträge 🤔

2026-01-09 09:30:02.200 - info: host.iobroker instance system.adapter.smartfriends.0 in version "1.2.0-alpha.1" started with pid 56896
2026-01-09 09:30:03.523 - info: smartfriends.0 (56896) starting. Version 1.2.0-alpha.1 in /opt/iobroker/node_modules/iobroker.smartfriends, node: v22.21.0, js-controller: 7.0.7
2026-01-09 09:30:03.561 - info: smartfriends.0 (56896) Connecting to gateway and retrieving data...
2026-01-09 09:30:03.876 - info: smartfriends.0 (56896) Querying all devices...
2026-01-09 09:30:10.335 - info: smartfriends.0 (56896) Device created: Rohrmotor PREMIUM (Kanal 4 / Doppelfenster) (ID: 10170)
2026-01-09 09:30:10.357 - info: smartfriends.0 (56896) Device created: Rohrmotor PREMIUM (Kanal 5) (ID: 15210)
2026-01-09 09:30:10.376 - info: smartfriends.0 (56896) Device created: ${Input} (ID: 13012)
2026-01-09 09:30:10.395 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 15939)
2026-01-09 09:30:10.403 - info: smartfriends.0 (56896) Device created: ${State} (ID: 19358)
2026-01-09 09:30:10.427 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 3776)
2026-01-09 09:30:10.434 - info: smartfriends.0 (56896) Device created: ${State} (ID: 19603)
2026-01-09 09:30:10.456 - info: smartfriends.0 (56896) Device created: Rohrmotor PREMIUM (Kanal 2 / Terrassentür) (ID: 1535)
2026-01-09 09:30:10.475 - info: smartfriends.0 (56896) Device created: Rohrmotor PREMIUM (Kanal 1) (ID: 10637)
2026-01-09 09:30:10.490 - info: smartfriends.0 (56896) Device created: ${State} (ID: 6409)
2026-01-09 09:30:10.509 - info: smartfriends.0 (56896) Device created: Rohrmotor PREMIUM (Kanal 5.2) (ID: 4789)
2026-01-09 09:30:10.526 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 12198)
2026-01-09 09:30:10.533 - info: smartfriends.0 (56896) Device created: ${State} (ID: 6394)
2026-01-09 09:30:10.589 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 19264)
2026-01-09 09:30:10.600 - info: smartfriends.0 (56896) Device created: ${State} (ID: 4067)
2026-01-09 09:30:10.630 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 9205)
2026-01-09 09:30:10.660 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 6356)
2026-01-09 09:30:10.669 - info: smartfriends.0 (56896) Device created: ${State} (ID: 19125)
2026-01-09 09:30:10.724 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 977)
2026-01-09 09:30:10.741 - info: smartfriends.0 (56896) Device created: ${State} (ID: 4468)
2026-01-09 09:30:10.791 - info: smartfriends.0 (56896) Device created: Rohrmotor PREMIUM (Kanal 3 / Festverglasung) (ID: 452)
2026-01-09 09:30:10.817 - info: smartfriends.0 (56896) Device created: ${Input} (ID: 9863)
2026-01-09 09:30:10.840 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 2583)
2026-01-09 09:30:10.867 - info: smartfriends.0 (56896) Device created: ${State} (ID: 13391)
2026-01-09 09:30:10.909 - info: smartfriends.0 (56896) Device created: ${Temperature} (ID: 8082)
2026-01-09 09:30:11.052 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 16168)
2026-01-09 09:30:11.066 - info: smartfriends.0 (56896) Device created: ${State} (ID: 9663)
2026-01-09 09:30:11.114 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 639)
2026-01-09 09:30:11.128 - info: smartfriends.0 (56896) Device created: ${State} (ID: 2709)
2026-01-09 09:30:11.247 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 17470)
2026-01-09 09:30:11.286 - info: smartfriends.0 (56896) Device created: ${State} (ID: 575)
2026-01-09 09:30:11.332 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 4870)
2026-01-09 09:30:11.341 - info: smartfriends.0 (56896) Device created: ${State} (ID: 19223)
2026-01-09 09:30:11.371 - info: smartfriends.0 (56896) Device created: ${State} (ID: 15527)
2026-01-09 09:30:11.381 - info: smartfriends.0 (56896) Device created: ${State} (ID: 18111)
2026-01-09 09:30:11.422 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 8348)
2026-01-09 09:30:11.433 - info: smartfriends.0 (56896) Device created: ${State} (ID: 5526)
2026-01-09 09:30:11.475 - info: smartfriends.0 (56896) Device created: ${Input} (ID: 8527)
2026-01-09 09:30:11.507 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 298)
2026-01-09 09:30:11.518 - info: smartfriends.0 (56896) Device created: ${State} (ID: 9211)
2026-01-09 09:30:11.560 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 4170)
2026-01-09 09:30:11.574 - info: smartfriends.0 (56896) Device created: ${State} (ID: 6417)
2026-01-09 09:30:11.695 - info: smartfriends.0 (56896) Device created: ${Switch} (ID: 14625)
2026-01-09 09:30:11.710 - info: smartfriends.0 (56896) Device created: ${State} (ID: 12896)
2026-01-09 09:30:11.751 - info: smartfriends.0 (56896) Processed 158 device(s), created 28 master device(s).
2026-01-09 09:30:49.916 - info: admin.0 (165) <== Disconnect system.user.admin from ::ffff:192.168.65.1 admin
2026-01-09 09:30:52.208 - info: admin.0 (165) ==> Connected system.user.admin from ::ffff:192.168.65.1

[Black Thunder]

@wak Laut Log sieht das doch eigentlich gut aus. Hast du auch mal den "devices"-Ordner aufgeklappt? Im Screenshot ist er noch zu 😉

Ansonsten auch mal versuchen, den kompletten "devices"-Ordner zu löschen, und dann den Adapter neu starten. Dann müssen eigentlich alle Objekte da sein.

[wak]

@Black-Thunder sagte in [Neuer Adapter] smartfriends:

Ansonsten auch mal versuchen, den kompletten "devices"-Ordner zu löschen, und dann den Adapter neu starten. Dann müssen eigentlich alle Objekte da sein.

Das hat's gebracht. Danke dafür !

[HeiLuRa]

@Black-Thunder Ich habe den Adapter neu installiert, also jetzt Version 1.2.0-alpha.0. Es lag nicht nur an der richtigen Version, sondern auch vor dem Rechner.
Vielen Dank nochmals für die Entwicklung des Adapters. Zur Info: ich habe die Premium Rollomotoren und Zigbee-Steckdosenschalter vom Lidl.

[wak]

@Black-Thunder
Nochmal eine Frage zu Devices, mir fehlen noch ein paar...
Schellenberg Funk-Thermostate (21001) 6x
Schellenberg Funk-Fenster/Türkontakt (21012) 1x
ABUS Z-Wave Rauchmelder (SHRM10000) 6x
ABUS Z-Wave Tür-/Fensterkontakte (SHMK10000) 6x
ABUS Z-Wave Wassermelder (SHWM10000) 1x
ABUS Z-Wave Taster (SHBE10000) 1x
und bei dem ABUS Multisensor Z-Wave (SHBW10000) wird nur die Temperatur übermittelt (Luftfeuchtigkeit, Helligkeit und Bewegungsmelder fehlen)
Siehst Du die im Log, oder werden die nicht unterstützt ?