NEWS
[erledigt] Problem: Fronius Wattpilot Adapter installieren
-
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
dann alle Updates aufgerufen
aber nicht installiert
@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
aber nicht installiert
Ich dachte, die werden dabei installiert ??
Raspberry PI5 mit Linux Debian 13, IoBroker v7.7.19, VIS-2, MariaDB (MySQL)
Shellies: 1G4, 1MiniG3, PlusI4DC, PlusPlugS, Pro0110PM, ProSmoke. Modbus: Waveshare Relay 8 Channels, Waveshare RS485-TO-ETH.
PV: 10 kWp Module, 2 x Deye WR SUN-10K, 2 x 10 kWh MeritSun LiFe Speicher, KEBA P30 Wallbox, Fronius Wattpilot home 11 -
@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
aber nicht installiert
Ich dachte, die werden dabei installiert ??
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
Ich dachte, die werden dabei installiert ??
wobei?
iob updatelädt nur die aktuelle Listekein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
auch mit dem Bau aller Adapter, oder nur mit dem Einlesen der Konfigurationen
Alles andere lief problemlos.
-
@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
sagt?
getfacl: /home/iobroker/iob_diag.log: No such file or directory pi@raspberrypi:~ $ ls -ls /home/ total 8 4 drwxr-x--- 4 iobroker iobroker 4096 Jan 3 11:35 iobroker 4 drwx------ 7 pi pi 4096 Jan 3 13:10 pi pi@raspberrypi:~ $ id uid=1000(pi) gid=1000(pi) groups=1000(pi),4(adm),20(dialout),24(cdrom),27(sudo),29(audio),44(video),46(plugdev), 60(games),100(users),102(netdev),986(gpio),988(i2c),989(spi),992(render),996(input),1001(iobroker) -
Was mache ich dazu am Besten:
/usr/bin/iob: line 21: /home/iobroker/iob_diag.log: Permission deniedRaspberry PI5 mit Linux Debian 13, IoBroker v7.7.19, VIS-2, MariaDB (MySQL)
Shellies: 1G4, 1MiniG3, PlusI4DC, PlusPlugS, Pro0110PM, ProSmoke. Modbus: Waveshare Relay 8 Channels, Waveshare RS485-TO-ETH.
PV: 10 kWp Module, 2 x Deye WR SUN-10K, 2 x 10 kWh MeritSun LiFe Speicher, KEBA P30 Wallbox, Fronius Wattpilot home 11 -
Was mache ich dazu am Besten:
/usr/bin/iob: line 21: /home/iobroker/iob_diag.log: Permission deniedsudo -H -u iobroker touch /home/iobroker/iob_diag.log -
Was mache ich dazu am Besten:
/usr/bin/iob: line 21: /home/iobroker/iob_diag.log: Permission deniedsagte in [Problem] Fronius Wattpilot Adapter installieren:
Was mache ich dazu am Besten:
Und der Fronius Wattpilot Adapter "spinnt" seit dem Update bei Node.js auf 22.21.1 auch wieder. Auch das IOB-Restore (gleich wie bei der Neuinstallation) half nicht. Unmittelbar nach der Neuinstallation lief der Adapter.
fronius-wattpilot.0 14573 2026-01-03 13:22:18.835 error WebSocket error: connect EHOSTUNREACH 192.168.0.29:80. fronius-wattpilot.0 14573 2026-01-03 13:22:15.769 info Creating WebSocket connection to ws://192.168.0.29/ws fronius-wattpilot.0 14573 2026-01-03 13:22:15.769 warn No message received for over 2.5 minutes. Attempting to reconnect. -
sudo -H -u iobroker touch /home/iobroker/iob_diag.log@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
sudo -H -u iobroker touch /home/iobroker/iob_diag.log
Super, danke !!! Das half. Und auch iob diag läuft wieder:
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.47+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:28:02 up 1:53, 2 users, load average: 0.12, 0.08, 0.17 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sat 2026-01-03 13:28:02 CET Universal time: Sat 2026-01-03 12:28:02 UTC RTC time: Sat 2026-01-03 12:28:02 Time zone: Europe/Vienna (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/pi GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 17G 2.1G 11G 24M 3.6G 14G Swap: 2.1G 0B 2.1G Total: 19G 2.1G 13G Active iob-Instances: 17 16218 M total memory 1988 M used memory 1776 M active memory 2964 M inactive memory 10925 M free memory 158 M buffer memory 3290 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 13:28:02 up 1:53, 2 users, load average: 0.12, 0.08, 0.17 Tasks: 204 total, 1 running, 203 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.5 us, 2.3 sy, 0.0 ni, 93.2 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 16219.0 total, 10927.7 free, 1985.0 used, 3449.7 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 14234.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.9G 0 7.9G 0% /dev tmpfs tmpfs 3.2G 14M 3.2G 1% /run /dev/mmcblk0p2 ext4 48G 7.3G 39G 16% / tmpfs tmpfs 8.0G 0 8.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 8.0G 9.7M 8.0G 1% /tmp /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.6G 32K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Jan 3 11:34:46 2026] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:C6:D1:C2 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=537d7520-02 rootfstype=ext4 fsck.repair=yes rootwait [Sat Jan 3 11:34:49 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Sat Jan 3 11:34:49 2026] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none. [Sat Jan 3 11:34:51 2026] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.6G /var/ 333M /var/lib 231M /var/cache 225M /var/cache/apt 156M /var/lib/mysql Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 17M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 418M /opt/iobroker/iobroker-data/ 406M /opt/iobroker/iobroker-data/files 113M /opt/iobroker/iobroker-data/files/vis-2 71M /opt/iobroker/iobroker-data/files/vis-2/widgets 67M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map 26M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.70a15e1f.js.map 18M /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.5fe9c7da.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.0 /usr/bin/node v22.21.0 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.21.0-1nodesource1 Candidate: 22.21.0-1nodesource1 Version table: *** 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 661) Core adapters versions js-controller: 7.0.7 admin: 7.7.19 javascript: 9.0.11 nodejs modules from github: 1 +-- iobroker.shelly@10.5.2 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.shelly.git#314fa9bf1651a10f9440f6fabb684ffcaf62137d) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.apg-info.0 : apg-info : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.emporia.1 : emporia : raspberrypi - enabled system.adapter.flexcharts.0 : flexcharts : raspberrypi - disabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.fronius-wattpilot.0 : fronius-wattpilot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.javascript.1 : javascript : raspberrypi - enabled + system.adapter.kecontact.0 : kecontact : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.modbus.1 : modbus : raspberrypi - enabled + system.adapter.modbus.2 : modbus : raspberrypi - enabled system.adapter.parser.0 : parser : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100 + system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306 system.adapter.systeminfo.0 : systeminfo : raspberrypi - disabled system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: raspberrypi - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-2-widgets-icontwo.0 : vis-2-widgets-icontwo : raspberrypi - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: raspberrypi - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled system.adapter.vis-2-widgets-weather-and-heating.0: vis-2-widgets-weather-and-heating: raspberrypi - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100 + system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬──────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼──────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │ └─────────┴──────────┴──────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: minor Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.19 , installed 7.7.19 Adapter "apg-info" : 0.1.28 , installed 0.1.27 [Updatable] Adapter "backitup" : 3.3.10 , installed 3.3.10 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "emporia" : 0.0.12 , installed 0.1.0 Adapter "flexcharts" : 0.6.1 , installed 0.6.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fronius-wattpilot": 4.7.0, installed 4.7.0 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "kecontact" : 3.3.0 , installed 3.3.0 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "parser" : 2.2.4 , installed 2.2.4 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "shelly" : 10.4.1 , installed 10.5.2 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "sql" : 3.0.1 , installed 3.0.1 Adapter "systeminfo" : 1.3.0 , installed 1.3.0 Adapter "vis-2" : 2.13.4 , installed 2.13.4 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 2.0.1, installed 2.0.1 Adapter "vis-2-widgets-icontwo": 1.20.0, installed 1.20.0 Adapter "vis-2-widgets-inventwo": 0.3.9, installed 0.3.9 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "vis-2-widgets-weather-and-heating": 1.1.5, installed 1.1.5 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Objects and States Please stand by - This may take a while Objects: 3306 States: 2669 *** OS-Repositories and Updates *** W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 110914 14428/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 110909 14428/iobroker.js-c tcp 0 0 192.168.0.100:1882 0.0.0.0:* LISTEN 1001 110465 14600/io.shelly.0 tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 102 8014 1007/mariadbd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 896 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 4897 953/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 107511 14446/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 114895 15004/io.web.0 tcp6 0 0 :::111 :::* LISTEN 0 4183 1/init tcp6 0 0 :::22 :::* LISTEN 0 4899 953/sshd: /usr/sbin udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 112820 14595/io.kecontact. udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 112821 14595/io.kecontact. udp 0 0 0.0.0.0:111 0.0.0.0:* 0 2938 1/init udp 0 0 0.0.0.0:43392 0.0.0.0:* 101 4706 731/avahi-daemon: r udp 0 0 0.0.0.0:59911 0.0.0.0:* 1001 111237 14595/io.kecontact. udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 4704 731/avahi-daemon: r udp6 0 0 :::55266 :::* 101 4707 731/avahi-daemon: r udp6 0 0 :::111 :::* 0 897 1/init udp6 0 0 fe80::7a72:a298:a7d:546 :::* 0 5043 802/NetworkManager udp6 0 0 :::5353 :::* 101 4705 731/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-01-03 13:21:37.791 - info: host.raspberrypi stopInstance system.adapter.systeminfo.0 send kill signal 2026-01-03 13:21:38.250 - info: systeminfo.0 (14759) terminating 2026-01-03 13:21:38.281 - info: host.raspberrypi instance system.adapter.systeminfo.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2026-01-03 13:22:15.769 - warn: fronius-wattpilot.0 (14573) No message received for over 2.5 minutes. Attempting to reconnect. 2026-01-03 13:22:15.769 - info: fronius-wattpilot.0 (14573) Creating WebSocket connection to ws://192.168.0.29/ws 2026-01-03 13:22:18.835 - error: fronius-wattpilot.0 (14573) WebSocket error: connect EHOSTUNREACH 192.168.0.29:80. 2026-01-03 13:22:18.836 - info: fronius-wattpilot.0 (14573) WebSocket connection closed. Code: 1006, Reason: 2026-01-03 13:22:45.371 - warn: sql.0 (14533) Cannot get index of "alias.0.Wetter.Regenmenge": id not found 2026-01-03 13:22:45.371 - info: sql.0 (14533) No Data 2026-01-03 13:23:45.375 - warn: sql.0 (14533) Cannot get index of "alias.0.Wetter.Tageslaenge": id not found 2026-01-03 13:23:45.376 - info: sql.0 (14533) No Data 2026-01-03 13:24:45.373 - warn: sql.0 (14533) Cannot get index of "alias.0.Wetter.Regenmenge": id not found 2026-01-03 13:24:45.373 - info: sql.0 (14533) No Data 2026-01-03 13:24:45.769 - warn: fronius-wattpilot.0 (14573) No message received for over 2.5 minutes. Attempting to reconnect. 2026-01-03 13:24:45.769 - info: fronius-wattpilot.0 (14573) Creating WebSocket connection to ws://192.168.0.29/ws 2026-01-03 13:24:48.819 - error: fronius-wattpilot.0 (14573) WebSocket error: connect EHOSTUNREACH 192.168.0.29:80. 2026-01-03 13:24:48.819 - info: fronius-wattpilot.0 (14573) WebSocket connection closed. Code: 1006, Reason: 2026-01-03 13:25:17.360 - info: web.0 (15004) <== Disconnect system.user.admin from ::ffff:192.168.0.20 2026-01-03 13:25:18.365 - info: web.0 (15004) ==> Connected system.user.admin from ::ffff:192.168.0.20 2026-01-03 13:27:15.769 - warn: fronius-wattpilot.0 (14573) No message received for over 2.5 minutes. Attempting to reconnect. 2026-01-03 13:27:15.769 - info: fronius-wattpilot.0 (14573) Creating WebSocket connection to ws://192.168.0.29/ws 2026-01-03 13:27:18.835 - error: fronius-wattpilot.0 (14573) WebSocket error: connect EHOSTUNREACH 192.168.0.29:80. 2026-01-03 13:27:18.835 - info: fronius-wattpilot.0 (14573) WebSocket connection closed. Code: 1006, Reason: 2026-01-03 13:27:45.369 - warn: sql.0 (14533) Cannot get index of "alias.0.Wetter.Regenmenge": id not found 2026-01-03 13:27:45.369 - info: sql.0 (14533) No Data============ Mark until here for C&P =============
iob diag has finished.
Raspberry PI5 mit Linux Debian 13, IoBroker v7.7.19, VIS-2, MariaDB (MySQL)
Shellies: 1G4, 1MiniG3, PlusI4DC, PlusPlugS, Pro0110PM, ProSmoke. Modbus: Waveshare Relay 8 Channels, Waveshare RS485-TO-ETH.
PV: 10 kWp Module, 2 x Deye WR SUN-10K, 2 x 10 kWh MeritSun LiFe Speicher, KEBA P30 Wallbox, Fronius Wattpilot home 11 -
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
Ich dachte, die werden dabei installiert ??
wobei?
iob updatelädt nur die aktuelle Liste@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
iob update lädt nur die aktuelle Liste
Pardon, aber wie kriege ich die Liste dann rein ins System?
Raspberry PI5 mit Linux Debian 13, IoBroker v7.7.19, VIS-2, MariaDB (MySQL)
Shellies: 1G4, 1MiniG3, PlusI4DC, PlusPlugS, Pro0110PM, ProSmoke. Modbus: Waveshare Relay 8 Channels, Waveshare RS485-TO-ETH.
PV: 10 kWp Module, 2 x Deye WR SUN-10K, 2 x 10 kWh MeritSun LiFe Speicher, KEBA P30 Wallbox, Fronius Wattpilot home 11 -
@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
iob update lädt nur die aktuelle Liste
Pardon, aber wie kriege ich die Liste dann rein ins System?
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
aber wie kriege ich die Liste dann rein ins System?
mit
iob upgrade adapterNameoderiob upgrade all -
@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
sudo -H -u iobroker touch /home/iobroker/iob_diag.log
Super, danke !!! Das half. Und auch iob diag läuft wieder:
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.47+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:28:02 up 1:53, 2 users, load average: 0.12, 0.08, 0.17 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sat 2026-01-03 13:28:02 CET Universal time: Sat 2026-01-03 12:28:02 UTC RTC time: Sat 2026-01-03 12:28:02 Time zone: Europe/Vienna (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/pi GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 17G 2.1G 11G 24M 3.6G 14G Swap: 2.1G 0B 2.1G Total: 19G 2.1G 13G Active iob-Instances: 17 16218 M total memory 1988 M used memory 1776 M active memory 2964 M inactive memory 10925 M free memory 158 M buffer memory 3290 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 13:28:02 up 1:53, 2 users, load average: 0.12, 0.08, 0.17 Tasks: 204 total, 1 running, 203 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.5 us, 2.3 sy, 0.0 ni, 93.2 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 16219.0 total, 10927.7 free, 1985.0 used, 3449.7 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 14234.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.9G 0 7.9G 0% /dev tmpfs tmpfs 3.2G 14M 3.2G 1% /run /dev/mmcblk0p2 ext4 48G 7.3G 39G 16% / tmpfs tmpfs 8.0G 0 8.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 8.0G 9.7M 8.0G 1% /tmp /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyAMA10.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.6G 32K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Jan 3 11:34:46 2026] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:C6:D1:C2 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=537d7520-02 rootfstype=ext4 fsck.repair=yes rootwait [Sat Jan 3 11:34:49 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Sat Jan 3 11:34:49 2026] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none. [Sat Jan 3 11:34:51 2026] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.6G /var/ 333M /var/lib 231M /var/cache 225M /var/cache/apt 156M /var/lib/mysql Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 17M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 418M /opt/iobroker/iobroker-data/ 406M /opt/iobroker/iobroker-data/files 113M /opt/iobroker/iobroker-data/files/vis-2 71M /opt/iobroker/iobroker-data/files/vis-2/widgets 67M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map 26M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.70a15e1f.js.map 18M /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.5fe9c7da.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.0 /usr/bin/node v22.21.0 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.21.0-1nodesource1 Candidate: 22.21.0-1nodesource1 Version table: *** 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 661) Core adapters versions js-controller: 7.0.7 admin: 7.7.19 javascript: 9.0.11 nodejs modules from github: 1 +-- iobroker.shelly@10.5.2 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.shelly.git#314fa9bf1651a10f9440f6fabb684ffcaf62137d) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.apg-info.0 : apg-info : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.echarts.0 : echarts : raspberrypi - disabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.emporia.1 : emporia : raspberrypi - enabled system.adapter.flexcharts.0 : flexcharts : raspberrypi - disabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.fronius-wattpilot.0 : fronius-wattpilot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.javascript.1 : javascript : raspberrypi - enabled + system.adapter.kecontact.0 : kecontact : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.modbus.1 : modbus : raspberrypi - enabled + system.adapter.modbus.2 : modbus : raspberrypi - enabled system.adapter.parser.0 : parser : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100 + system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306 system.adapter.systeminfo.0 : systeminfo : raspberrypi - disabled system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: raspberrypi - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-2-widgets-icontwo.0 : vis-2-widgets-icontwo : raspberrypi - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: raspberrypi - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled system.adapter.vis-2-widgets-weather-and-heating.0: vis-2-widgets-weather-and-heating: raspberrypi - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.0.100 + system.adapter.sql.0 : sql : raspberrypi - enabled, port: 3306 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬──────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼──────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │ └─────────┴──────────┴──────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: minor Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.19 , installed 7.7.19 Adapter "apg-info" : 0.1.28 , installed 0.1.27 [Updatable] Adapter "backitup" : 3.3.10 , installed 3.3.10 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "emporia" : 0.0.12 , installed 0.1.0 Adapter "flexcharts" : 0.6.1 , installed 0.6.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fronius-wattpilot": 4.7.0, installed 4.7.0 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "kecontact" : 3.3.0 , installed 3.3.0 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "parser" : 2.2.4 , installed 2.2.4 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "shelly" : 10.4.1 , installed 10.5.2 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "sql" : 3.0.1 , installed 3.0.1 Adapter "systeminfo" : 1.3.0 , installed 1.3.0 Adapter "vis-2" : 2.13.4 , installed 2.13.4 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 2.0.1, installed 2.0.1 Adapter "vis-2-widgets-icontwo": 1.20.0, installed 1.20.0 Adapter "vis-2-widgets-inventwo": 0.3.9, installed 0.3.9 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "vis-2-widgets-weather-and-heating": 1.1.5, installed 1.1.5 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Objects and States Please stand by - This may take a while Objects: 3306 States: 2669 *** OS-Repositories and Updates *** W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://deb.debian.org/debian-security trixie-security InRelease Hit:4 http://archive.raspberrypi.com/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 110914 14428/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 110909 14428/iobroker.js-c tcp 0 0 192.168.0.100:1882 0.0.0.0:* LISTEN 1001 110465 14600/io.shelly.0 tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 102 8014 1007/mariadbd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 896 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 4897 953/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 107511 14446/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 114895 15004/io.web.0 tcp6 0 0 :::111 :::* LISTEN 0 4183 1/init tcp6 0 0 :::22 :::* LISTEN 0 4899 953/sshd: /usr/sbin udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 112820 14595/io.kecontact. udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 112821 14595/io.kecontact. udp 0 0 0.0.0.0:111 0.0.0.0:* 0 2938 1/init udp 0 0 0.0.0.0:43392 0.0.0.0:* 101 4706 731/avahi-daemon: r udp 0 0 0.0.0.0:59911 0.0.0.0:* 1001 111237 14595/io.kecontact. udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 4704 731/avahi-daemon: r udp6 0 0 :::55266 :::* 101 4707 731/avahi-daemon: r udp6 0 0 :::111 :::* 0 897 1/init udp6 0 0 fe80::7a72:a298:a7d:546 :::* 0 5043 802/NetworkManager udp6 0 0 :::5353 :::* 101 4705 731/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-01-03 13:21:37.791 - info: host.raspberrypi stopInstance system.adapter.systeminfo.0 send kill signal 2026-01-03 13:21:38.250 - info: systeminfo.0 (14759) terminating 2026-01-03 13:21:38.281 - info: host.raspberrypi instance system.adapter.systeminfo.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2026-01-03 13:22:15.769 - warn: fronius-wattpilot.0 (14573) No message received for over 2.5 minutes. Attempting to reconnect. 2026-01-03 13:22:15.769 - info: fronius-wattpilot.0 (14573) Creating WebSocket connection to ws://192.168.0.29/ws 2026-01-03 13:22:18.835 - error: fronius-wattpilot.0 (14573) WebSocket error: connect EHOSTUNREACH 192.168.0.29:80. 2026-01-03 13:22:18.836 - info: fronius-wattpilot.0 (14573) WebSocket connection closed. Code: 1006, Reason: 2026-01-03 13:22:45.371 - warn: sql.0 (14533) Cannot get index of "alias.0.Wetter.Regenmenge": id not found 2026-01-03 13:22:45.371 - info: sql.0 (14533) No Data 2026-01-03 13:23:45.375 - warn: sql.0 (14533) Cannot get index of "alias.0.Wetter.Tageslaenge": id not found 2026-01-03 13:23:45.376 - info: sql.0 (14533) No Data 2026-01-03 13:24:45.373 - warn: sql.0 (14533) Cannot get index of "alias.0.Wetter.Regenmenge": id not found 2026-01-03 13:24:45.373 - info: sql.0 (14533) No Data 2026-01-03 13:24:45.769 - warn: fronius-wattpilot.0 (14573) No message received for over 2.5 minutes. Attempting to reconnect. 2026-01-03 13:24:45.769 - info: fronius-wattpilot.0 (14573) Creating WebSocket connection to ws://192.168.0.29/ws 2026-01-03 13:24:48.819 - error: fronius-wattpilot.0 (14573) WebSocket error: connect EHOSTUNREACH 192.168.0.29:80. 2026-01-03 13:24:48.819 - info: fronius-wattpilot.0 (14573) WebSocket connection closed. Code: 1006, Reason: 2026-01-03 13:25:17.360 - info: web.0 (15004) <== Disconnect system.user.admin from ::ffff:192.168.0.20 2026-01-03 13:25:18.365 - info: web.0 (15004) ==> Connected system.user.admin from ::ffff:192.168.0.20 2026-01-03 13:27:15.769 - warn: fronius-wattpilot.0 (14573) No message received for over 2.5 minutes. Attempting to reconnect. 2026-01-03 13:27:15.769 - info: fronius-wattpilot.0 (14573) Creating WebSocket connection to ws://192.168.0.29/ws 2026-01-03 13:27:18.835 - error: fronius-wattpilot.0 (14573) WebSocket error: connect EHOSTUNREACH 192.168.0.29:80. 2026-01-03 13:27:18.835 - info: fronius-wattpilot.0 (14573) WebSocket connection closed. Code: 1006, Reason: 2026-01-03 13:27:45.369 - warn: sql.0 (14533) Cannot get index of "alias.0.Wetter.Regenmenge": id not found 2026-01-03 13:27:45.369 - info: sql.0 (14533) No Data============ Mark until here for C&P =============
iob diag has finished.
@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
sudo -H -u iobroker touch /home/iobroker/iob_diag.log
Hilft das auch in dem Fall? Ich kann als User "iobroker" nicht auf mysql zugreifen:
pi@raspberrypi:~ $ sudo mysql -u iobroker -p -D iobroker Enter password: ERROR 1045 (28000): Access denied for user 'iobroker'@'localhost' (using password: YES) pi@raspberrypi:~ $Raspberry PI5 mit Linux Debian 13, IoBroker v7.7.19, VIS-2, MariaDB (MySQL)
Shellies: 1G4, 1MiniG3, PlusI4DC, PlusPlugS, Pro0110PM, ProSmoke. Modbus: Waveshare Relay 8 Channels, Waveshare RS485-TO-ETH.
PV: 10 kWp Module, 2 x Deye WR SUN-10K, 2 x 10 kWh MeritSun LiFe Speicher, KEBA P30 Wallbox, Fronius Wattpilot home 11 -
@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
Deswegen springt man auch nicht als root oder mit unnötigen root-Rechten über die Kisten
@fuzzy1955
eben auch nicht Dateien per WINSCP als root reinschieben@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
eben auch nicht Dateien per WINSCP als root reinschieben
Aber ich arbeite mit WINSCP doch immer schon als User pi:
Raspberry PI5 mit Linux Debian 13, IoBroker v7.7.19, VIS-2, MariaDB (MySQL)
Shellies: 1G4, 1MiniG3, PlusI4DC, PlusPlugS, Pro0110PM, ProSmoke. Modbus: Waveshare Relay 8 Channels, Waveshare RS485-TO-ETH.
PV: 10 kWp Module, 2 x Deye WR SUN-10K, 2 x 10 kWh MeritSun LiFe Speicher, KEBA P30 Wallbox, Fronius Wattpilot home 11 -
@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
eben auch nicht Dateien per WINSCP als root reinschieben
Aber ich arbeite mit WINSCP doch immer schon als User pi:
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
immer schon als User pi:
dann ist ja alles gut.
Wenn du mit diesem User auch iobroker installiert hast hat der auch alle notwendigen Rechte.Da gibt es keinen Grund an den Rechten zu spielen.
Natürlich hat der Systemuser iobroker nicht das Recht in /home/pi/ etwas zu tun.
Da haben iobroker Daten deshalb auch nichts verloren.kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
immer schon als User pi:
dann ist ja alles gut.
Wenn du mit diesem User auch iobroker installiert hast hat der auch alle notwendigen Rechte.Da gibt es keinen Grund an den Rechten zu spielen.
Natürlich hat der Systemuser iobroker nicht das Recht in /home/pi/ etwas zu tun.
Da haben iobroker Daten deshalb auch nichts verloren.@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
Natürlich hat der Systemuser iobroker nicht das Recht in /home/pi/ etwas zu tun.
Da schreibe ich aber die Logs der automatischen Updates rein, die ich im IOB abfragen möchte. Deshalb bräuchte der User iobroker dort das Leserecht. Und wenn ich das Verzeichnis innerhalb von /opt/iobroker anlege?
Ich muss jetzt leider wegfahren. Geht es an Abend ab 20 h wieder?
Raspberry PI5 mit Linux Debian 13, IoBroker v7.7.19, VIS-2, MariaDB (MySQL)
Shellies: 1G4, 1MiniG3, PlusI4DC, PlusPlugS, Pro0110PM, ProSmoke. Modbus: Waveshare Relay 8 Channels, Waveshare RS485-TO-ETH.
PV: 10 kWp Module, 2 x Deye WR SUN-10K, 2 x 10 kWh MeritSun LiFe Speicher, KEBA P30 Wallbox, Fronius Wattpilot home 11 -
@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
Natürlich hat der Systemuser iobroker nicht das Recht in /home/pi/ etwas zu tun.
Da schreibe ich aber die Logs der automatischen Updates rein, die ich im IOB abfragen möchte. Deshalb bräuchte der User iobroker dort das Leserecht. Und wenn ich das Verzeichnis innerhalb von /opt/iobroker anlege?
Ich muss jetzt leider wegfahren. Geht es an Abend ab 20 h wieder?
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
Da schreibe ich aber die Logs der automatischen Updates rein
dann lass das
-
@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
Natürlich hat der Systemuser iobroker nicht das Recht in /home/pi/ etwas zu tun.
Da schreibe ich aber die Logs der automatischen Updates rein, die ich im IOB abfragen möchte. Deshalb bräuchte der User iobroker dort das Leserecht. Und wenn ich das Verzeichnis innerhalb von /opt/iobroker anlege?
Ich muss jetzt leider wegfahren. Geht es an Abend ab 20 h wieder?
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
Da schreibe ich aber die Logs der automatischen Updates rein
Wat?
-
@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
sudo -H -u iobroker touch /home/iobroker/iob_diag.log
Hilft das auch in dem Fall? Ich kann als User "iobroker" nicht auf mysql zugreifen:
pi@raspberrypi:~ $ sudo mysql -u iobroker -p -D iobroker Enter password: ERROR 1045 (28000): Access denied for user 'iobroker'@'localhost' (using password: YES) pi@raspberrypi:~ $@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
ERROR 1045 (28000): Access denied for user 'iobroker'@'localhost' (using password: YES)
iobroker als Systemuser hat kein Passwort. Für Maschinen gibt es in der Regel andere Methoden der Authentizifierung. Bei mysql kenn ich mich aber nicht aus.
-
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
ERROR 1045 (28000): Access denied for user 'iobroker'@'localhost' (using password: YES)
iobroker als Systemuser hat kein Passwort. Für Maschinen gibt es in der Regel andere Methoden der Authentizifierung. Bei mysql kenn ich mich aber nicht aus.
@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
iobroker als Systemuser hat kein Passwort.
Danke euch zwei für die Unterstützung. Ich installiere jetzt nochmals alles frisch auf einer neuen SD-Karte.
-
@Homoran sagte in [Problem] Fronius Wattpilot Adapter installieren:
Natürlich hat der Systemuser iobroker nicht das Recht in /home/pi/ etwas zu tun.
Da schreibe ich aber die Logs der automatischen Updates rein, die ich im IOB abfragen möchte. Deshalb bräuchte der User iobroker dort das Leserecht. Und wenn ich das Verzeichnis innerhalb von /opt/iobroker anlege?
Ich muss jetzt leider wegfahren. Geht es an Abend ab 20 h wieder?
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
Deshalb bräuchte der User iobroker dort das Leserecht. Und wenn ich das Verzeichnis innerhalb von /opt/iobroker anlege?
Und warum nicht in /home/iobroker? Da liegen ja die Logs von 'iob diag' z. B. auch.
Zumal ich immer noch nicht verstanden habe, was denn das für 'Logs der automatischen Updates' sein sollen. -
@fuzzy1955 sagte in [Problem] Fronius Wattpilot Adapter installieren:
Deshalb bräuchte der User iobroker dort das Leserecht. Und wenn ich das Verzeichnis innerhalb von /opt/iobroker anlege?
Und warum nicht in /home/iobroker? Da liegen ja die Logs von 'iob diag' z. B. auch.
Zumal ich immer noch nicht verstanden habe, was denn das für 'Logs der automatischen Updates' sein sollen.@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
Und warum nicht in /home/iobroker?
Ja, du hast recht. Darauf bin ich noch nicht gekommen.@Thomas-Braun sagte in [Problem] Fronius Wattpilot Adapter installieren:
Zumal ich immer noch nicht verstanden habe, was denn das für 'Logs der automatischen Updates' sein sollen
Das sollte mein automatisches Update täglich um 1:00 h sein:update.sh -------------------- #!/bin/bash iob stop iob fix iob update >> ./log/update_iob.log 2>&1 iob upgrade self >> ./log/update_iob.log 2>&1 iob upgrade >> ./log/update_iob.log 2>&1 sudo apt update >> ./log/update.log 2>&1 sudo apt full-upgrade -y >> ./log/update.log 2>&1 sudo apt autoremove -y >> ./log/update.log 2>&1 iob fix sudo reboot --------------------Raspberry PI5 mit Linux Debian 13, IoBroker v7.7.19, VIS-2, MariaDB (MySQL)
Shellies: 1G4, 1MiniG3, PlusI4DC, PlusPlugS, Pro0110PM, ProSmoke. Modbus: Waveshare Relay 8 Channels, Waveshare RS485-TO-ETH.
PV: 10 kWp Module, 2 x Deye WR SUN-10K, 2 x 10 kWh MeritSun LiFe Speicher, KEBA P30 Wallbox, Fronius Wattpilot home 11
Support us
449
Online32.6k
Benutzer82.0k
Themen1.3m
Beiträge