Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Thomas Braun]

@Mark

Ich sehe da eigentlich nichts ungewöhnliches. Was sagt denn

mount | sort

[Mark]

@Thomas-Braun

 pi@raspberrypi:~ $ mount | sort
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup2 on /sys/fs/cgroup type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
/dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro)
/dev/mmcblk0p2 on / type ext4 (rw,noatime,commit=600)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
/dev/sda1 on /var/lib/mysql type ext4 (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=1678472k,nr_inodes=419618,mode=755)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,relatime)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
ramfs on /run/credentials/systemd-sysctl.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
ramfs on /run/credentials/systemd-sysusers.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
ramfs on /run/credentials/systemd-tmpfiles-setup-dev.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
ramfs on /run/credentials/systemd-tmpfiles-setup.service type ramfs (ro,nosuid,nodev,noexec,relatime,mode=700)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
sunrpc on /run/rpc_pipefs type rpc_pipefs (rw,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /run type tmpfs (rw,nosuid,nodev,size=777080k,nr_inodes=819200,mode=755)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=388536k,nr_inodes=97134,mode=700,uid=1000,gid=1000)
tracefs on /sys/kernel/tracing type tracefs (rw,nosuid,nodev,noexec,relatime)
pi@raspberrypi:~ $

MOD-EDIT:Code in code-tags gesetzt!

[Thomas Braun]

@Mark
Mir fällt nix auf.
Außer halt den missglückten Versuch das Ding von einer Vorversion auf Bookworm zu hieven.
Installier es neu.

[Mark]

Eigentlich wollte ich eine Neuinstallation vermeiden, aber vermutlich hast du recht und ich bin damit wesentlich schneller und besser dran...
Danke dir

[Thomas Braun]

@Mark sagte in Keine Updates trotz Exit Code 0:

wollte ich eine Neuinstallation vermeiden

Funktioniert aber nicht.

[Mark]

@Thomas-Braun
so, neues Image drauf, IO-Broker installiert und versucht das Backup wegen meinen Adaptern zurückzuspielen.
Shelly und Skript sind aktuell,
S7 geht nicht, renault findet er gar nicht, vis funktioniert auch nicht.

Aber ich glaube das Hauptproblem ist folgendes:

	iobroker npm-install: npm error code 1npm error path /opt/iobroker/node_modules/node-snap7npm error command failednpm error command sh -c prebuild-install || node-gyp rebuildnpm error (node:4373) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.npm error (Use `node --trace-deprecation ...` to show where the warning was created)npm error Traceback (most recent call last):npm error File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>npm error import gyp # noqa: E402npm error ^^^^^^^^^^npm error File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>npm error import gyp.inputnpm error File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>npm error from distutils.version import StrictVersionnpm error ModuleNotFoundError: No module named 'distutils'npm error gyp ERR! configure error npm error gyp ERR! stack Error: `gyp` failed with exit code: 1npm error gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)npm error gyp ERR! stack at ChildProcess.emit (node:events:519:28)npm error gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:293:12)npm error gyp ERR! System Linux 6.12.47+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/node-snap7npm error gyp ERR! node -v v22.21.0npm error gyp ERR! node-gyp -v v8.4.1npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-31T11_06_51_368Z-debug-0.loghost.raspberrypi Cannot install iobroker.s7@1.5.0: 1

iob diag Ergibt folgende Ausgabe:

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: raspberrypi
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 12:13:12 up 17 min,  1 user,  load average: 0.44, 0.91, 0.97
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-12-31 12:13:12 CET
           Universal time: Wed 2025-12-31 11:13:12 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
mark
HOME=/home/mark
GROUPS=mark adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/mark
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        1.2G        2.0G         12M        861M        2.8G
Swap:           2.1G          0B        2.1G
Total:          6.1G        1.2G        4.2G

Active iob-Instances:   10

         3796 M total memory
         1143 M used memory
         1106 M active memory
          495 M inactive memory
         1930 M free memory
           98 M buffer memory
          723 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 12:13:12 up 17 min,  1 user,  load average: 0.49, 0.91, 0.97
Tasks: 185 total,   1 running, 184 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  2.1 sy,  0.0 ni, 97.9 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3796.7 total,   1928.8 free,   1144.7 used,    822.5 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   2652.0 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     760M  9.4M  751M   2% /run
/dev/mmcblk0p2 ext4      117G  6.4G  106G   6% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     1.9G  2.8M  1.9G   1% /tmp
/dev/mmcblk0p1 vfat      510M   74M  437M  15% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyS0.service
tmpfs          tmpfs     380M  8.0K  380M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Dec 31 11:55:26 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=DC:A6:32:3A:14:63 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=4c646aa6-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Wed Dec 31 11:55:30 2025] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Wed Dec 31 11:55:30 2025] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none.
[Wed Dec 31 11:55:33 2025] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.4G    /var/
231M    /var/cache
225M    /var/cache/apt
177M    /var/lib
145M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
152M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
248M    /opt/iobroker/iobroker-data/
226M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
19M     /opt/iobroker/iobroker-data/objects.jsonl
9.8M    /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-C_W7K-9p.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0
/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_B002A4TN-if00-port0
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0033-if00-port0
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0058-if00-port0
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0068-if00-port0

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.21.0
/usr/bin/node           v22.21.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.21.0-1nodesource1
  Candidate: 22.21.0-1nodesource1
  Version table:
 *** 22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspberrypi         raspberrypi (version: 7.0.7, hostname: raspberrypi   , alive, uptime: 664)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
  system.adapter.fritzdect.0              : fritzdect             : raspberrypi                              - disabled
  system.adapter.icons-icons8.0           : icons-icons8          : raspberrypi                              - disabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.modbus.1                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.oekofen-json.0           : oekofen-json          : raspberrypi                              -  enabled
  system.adapter.renault.0                : renault               : raspberrypi                              -  enabled
  system.adapter.roborock.0               : roborock              : raspberrypi                              - disabled
  system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              - disabled
  system.adapter.s7.0                     : s7                    : raspberrypi                              - disabled
  system.adapter.s7.1                     : s7                    : raspberrypi                              - disabled
  system.adapter.s7.2                     : s7                    : raspberrypi                              - disabled
  system.adapter.shelly.0                 : shelly                : raspberrypi                              - disabled, port: 1883, bind: 192.168.188.149
+ system.adapter.smartmeter.0             : smartmeter            : raspberrypi                              -  enabled
+ system.adapter.smartmeter.1             : smartmeter            : raspberrypi                              -  enabled
+ system.adapter.smartmeter.2             : smartmeter            : raspberrypi                              -  enabled
  system.adapter.sql.0                    : sql                   : raspberrypi                              - disabled, port: 3306
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.web.0                    : web                   : raspberrypi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "fritzdect"    : 2.6.2    , installed 2.6.2
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "oekofen-json" : 2.0.0    , installed 2.0.0
Adapter    "roborock"     : 0.6.18   , installed 0.6.18
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "sql"          : 3.0.1    , installed 3.0.1
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.18.0   , installed 1.18.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19

Objects and States
Please stand by - This may take a while
Objects:        14741
States:         12445

*** OS-Repositories and Updates ***
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://deb.debian.org/debian-security trixie-security InRelease
Hit:4 http://archive.raspberrypi.com/debian trixie InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          8508       1074/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          5092       1/init
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       17085      3085/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       17080      3085/iobroker.js-co
tcp6       0      0 :::22                   :::*                    LISTEN      0          8510       1074/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          159        1/init
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       14279      3110/io.admin.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        7456       655/avahi-daemon: r
udp        0      0 0.0.0.0:34437           0.0.0.0:*                           101        7458       655/avahi-daemon: r
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          1799       1/init
udp6       0      0 fe80::dea6:32ff:fe3:546 :::*                                0          8565       691/NetworkManager
udp6       0      0 :::43813                :::*                                101        7459       655/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                101        7457       655/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          5093       1/init

*** Log File - Last 25 Lines ***

2025-12-31 12:08:00.457  - info: modbus.1 (3233) Disconnected from slave
2025-12-31 12:09:02.487  - warn: smartmeter.0 (3292) No or too long answer from Serial Device after last request.
2025-12-31 12:09:04.536  - warn: smartmeter.1 (3325) No or too long answer from Serial Device after last request.
2025-12-31 12:09:07.868  - warn: smartmeter.2 (3337) No or too long answer from Serial Device after last request.
2025-12-31 12:09:28.150  - info: modbus.1 (3233) Connected to slave
2025-12-31 12:09:33.151  - warn: modbus.1 (3233) Error: undefined
2025-12-31 12:09:33.152  - error: modbus.1 (3233) Request timed out.
2025-12-31 12:09:33.153  - warn: modbus.1 (3233) [DevID_2] Poll error count: 5 code: {"err":"timeout","timeout":5000}
2025-12-31 12:09:34.152  - info: modbus.1 (3233) Disconnected from slave
2025-12-31 12:11:01.846  - info: modbus.1 (3233) Connected to slave
2025-12-31 12:11:06.849  - warn: modbus.1 (3233) Error: undefined
2025-12-31 12:11:06.849  - error: modbus.1 (3233) Request timed out.
2025-12-31 12:11:06.850  - warn: modbus.1 (3233) [DevID_2] Poll error count: 6 code: {"err":"timeout","timeout":5000}
2025-12-31 12:11:07.672  - warn: smartmeter.0 (3292) No or too long answer from Serial Device after last request.
2025-12-31 12:11:07.850  - info: modbus.1 (3233) Disconnected from slave
2025-12-31 12:11:09.718  - warn: smartmeter.1 (3325) No or too long answer from Serial Device after last request.
2025-12-31 12:11:13.047  - warn: smartmeter.2 (3337) No or too long answer from Serial Device after last request.
2025-12-31 12:12:35.542  - info: modbus.1 (3233) Connected to slave
2025-12-31 12:12:40.545  - warn: modbus.1 (3233) Error: undefined
2025-12-31 12:12:40.546  - error: modbus.1 (3233) Request timed out.
2025-12-31 12:12:40.547  - warn: modbus.1 (3233) [DevID_2] Poll error count: 7 code: {"err":"timeout","timeout":5000}
2025-12-31 12:12:41.546  - info: modbus.1 (3233) Disconnected from slave
2025-12-31 12:13:12.855  - warn: smartmeter.0 (3292) No or too long answer from Serial Device after last request.
2025-12-31 12:13:14.906  - warn: smartmeter.1 (3325) No or too long answer from Serial Device after last request.
2025-12-31 12:13:18.230  - warn: smartmeter.2 (3337) No or too long answer from Serial Device after last request.

============ Mark until here for C&P =============

sudo apt update
sudo apt upgrade wurde gemacht und läuft
iob fix wurde auch ausgeführt und läuft fehlerfrei durch

[Homoran]

@Mark sagte in Keine Updates trotz Exit Code 0:

neues Image drauf

heisst was genau?

[Mark]

@Homoran
hab mit dem Pi-Imager eine neue SD-Karte mit Trixi erstellt.
Danach mit SSH eingeloggt und IOB installiert.
Updates, gestartet und dann versucht das Backup einzuspielen

[Homoran]

@Mark sagte in Keine Updates trotz Exit Code 0:

Danach mit SSH eingeloggt und IOB installiert.

und da war diag sauber?

[Mark]

@Homoran
ich kenne mich leider zu wenig aus um das wirklich beurteilen zu können.
Hab das diag aber oben gepostet und würde als Laie sagen, ja, ist sauber

[Homoran]

@Mark sagte in Keine Updates trotz Exit Code 0:

Hab das diag aber oben geposte

war das von vor dem Restore?

[Mark]

@Homoran
nein, jetzt aktuell

[Homoran]

@Mark aber es geht auch darum wann es zu den Problemen kommt.

@Mark sagte in Keine Updates trotz Exit Code 0:

das Hauptproblem

wo kommt denn das log her?
...und von wann?

[Mark]

@Homoran
ist auch aktuell.
Die Fehler entstehen, weil die Adapter nicht richtig funktionieren. (Smartmeter und Modbus). Sind aber die gleichen einstellungen wie am alten System und da hat es funktioniert. Hab die Adapter jetzt gestoppt.

Im protokoll kommt aber immer wieder:

	iobroker npm-install: npm error code 1npm error path /opt/iobroker/node_modules/node-snap7npm error command failednpm error command sh -c prebuild-install || node-gyp rebuildnpm error (node:8282) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.npm error (Use `node --trace-deprecation ...` to show where the warning was created)npm error Traceback (most recent call last):npm error File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>npm error import gyp # noqa: E402npm error ^^^^^^^^^^npm error File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>npm error import gyp.inputnpm error File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>npm error from distutils.version import StrictVersionnpm error ModuleNotFoundError: No module named 'distutils'npm error gyp ERR! configure error npm error gyp ERR! stack Error: `gyp` failed with exit code: 1npm error gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)npm error gyp ERR! stack at ChildProcess.emit (node:events:519:28)npm error gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:293:12)npm error gyp ERR! System Linux 6.12.47+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/node-snap7npm error gyp ERR! node -v v22.21.0npm error gyp ERR! node-gyp -v v8.4.1npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-31T11_31_33_580Z-debug-0.log

[Homoran]

@Mark sagte in Keine Updates trotz Exit Code 0:

Im protokoll kommt aber immer wieder:

in welchem Protokoll?

Das iobroker Protokoll ist gänzlich anders formatiert

[Homoran]

@Mark sagte in Keine Updates trotz Exit Code 0:

Die Fehler entstehen, weil die Adapter nicht richtig funktionieren

eher anders rum:
wegen Fehlern laufen die Adapter nicht.

um das herauszufinden muss man aber auch wissen wann was wie genau zu welchen exakten Meldungen führt.

Wie lwnge hast du nach dem Restore gewartet?
Der Bau der Adapter fängt dann erst an und sollte nicht gestört werden

[Mark]

@Homoran
sorry, ich hab nur die Fehlermeldung rauskopiert. Hier mal der heutige Log:

iobroker.current.htm

Ist also vom ersten starten bis jetzt

[Thomas Braun]

@Mark

Aber ich glaube das Hauptproblem ist folgendes:

Installier python3-setuptools nach.

sudo apt install python3-setuptools

[Mark]

@Thomas-Braun
hab ich gemacht.

host.raspberrypi
	2025-12-31 14:03:00.697	info	iobroker exit 25
host.raspberrypi
	2025-12-31 14:02:59.649	error	iobroker host.raspberrypi Cannot install iobroker.rpi2@2.4.0: 1
host.raspberrypi
	2025-12-31 14:02:59.645	error	iobroker npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'npm error (node:10247) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.npm error (Use `node --trace-deprecation ...` to show where the warning was created)npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.onExit (/opt/iobroker/node_modules/node-gyp/lib/build.js:194:23)npm error gyp ERR! stack at ChildProcess.emit (node:events:519:28)npm error gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:293:12)npm error gyp ERR! System Linux 6.12.47+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.21.0npm error gyp ERR! node-gyp -v v8.4.1npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-31T13_02_43_012Z-debug-0.log
host.raspberrypi
	2025-12-31 14:02:42.780	info	iobroker Installing iobroker.rpi2@2.4.0... (System call)
host.raspberrypi
	2025-12-31 14:02:42.778	info	iobroker NPM version: 10.9.4
host.raspberrypi
	2025-12-31 14:02:39.067	info	iobroker add rpi2 --host raspberrypi
host.raspberrypi
	2025-12-31 14:02:14.259	info	iobroker exit 25
host.raspberrypi
	2025-12-31 14:02:13.187	error	iobroker host.raspberrypi Cannot install iobroker.rpi2@2.4.0: 1

[Thomas Braun]

@Mark sagte in Keine Updates trotz Exit Code 0:

iobroker.rpi2@2.4.0

Zu alt. Da muss eine Version 3 (z. Zt. noch Beta) installiert werden.