NEWS
Raspi 5 - 8Gb Arbeitsspeicher läuft voll
ioBroker Allgemein
25
Beiträge
3
Kommentatoren
539
Aufrufe
3
Watching
-
Nun bleibt noch ein Fehler:
z2m: Could not init sd_notify: The module '/opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.6/node_modules/unix-dgram/build/Release/unix_dgram.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 115. This version of Node.js requires NODE_MODULE_VERSION 127. Please try re-compiling or re-installing the module (for instance, using `npm rebuild` or `npm install`).npm rebuild und npm install bringen keine Besserung.
*** NodeJS-Installation ***
/usr/bin/nodejs v22.21.0
/usr/bin/node v22.21.0
/usr/bin/npm 10.9.4
/usr/bin/npx 10.9.4
/usr/bin/corepack 0.34.0 -
Nun bleibt noch ein Fehler:
z2m: Could not init sd_notify: The module '/opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.6/node_modules/unix-dgram/build/Release/unix_dgram.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 115. This version of Node.js requires NODE_MODULE_VERSION 127. Please try re-compiling or re-installing the module (for instance, using `npm rebuild` or `npm install`).npm rebuild und npm install bringen keine Besserung.
*** NodeJS-Installation ***
/usr/bin/nodejs v22.21.0
/usr/bin/node v22.21.0
/usr/bin/npm 10.9.4
/usr/bin/npx 10.9.4
/usr/bin/corepack 0.34.0@Autodidakt sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:
npm rebuild und npm install bringen keine Besserung
Was genau wo genau ausgeführt?
-
npm rebuildundnpm installim Raspberry Home verzeichnis -
War das das falsche Verzeichnis?
-
npm rebuildundnpm installim Raspberry Home verzeichnis@Autodidakt sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:
npm rebuildundnpm installim Raspberry Home verzeichniswas hast du da denn von npm drin?
-
-
Vermutlich nichts, weil ein fehler kam.
@Autodidakt sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:
Vermutlich nichts, weil ein fehler kam.
dann versuch es mal in
/opt/iobroker -
sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:
npm rebuild
O weih...
pi@IoBMaster:/opt/iobroker $ npm rebuild npm error code 1 npm error path /opt/iobroker/node_modules/opengpio npm error command failed npm error command sh -c node-gyp rebuild npm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build' npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.o npm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build' npm error gyp info it worked if it ends with ok npm error gyp info using node-gyp@8.4.1 npm error gyp info using node@22.21.0 | linux | arm64 npm error (node:186327) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead. npm error (Use `node --trace-deprecation ...` to show where the warning was created) npm error gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3" npm error gyp info spawn /usr/bin/python3 npm error gyp info spawn args [ npm error gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py', npm error gyp info spawn args 'binding.gyp', npm error gyp info spawn args '-f', npm error gyp info spawn args 'make', npm error gyp info spawn args '-I', npm error gyp info spawn args '/opt/iobroker/node_modules/opengpio/build/config.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/22.21.0/include/node/common.gypi', npm error gyp info spawn args '-Dlibrary=shared_library', npm error gyp info spawn args '-Dvisibility=default', npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.21.0', npm error gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp', npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.21.0/<(target_arch)/node.lib', npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio', npm error gyp info spawn args '-Dnode_engine=v8', npm error gyp info spawn args '--depth=.', npm error gyp info spawn args '--no-parallel', npm error gyp info spawn args '--generator-output', npm error gyp info spawn args 'build', npm error gyp info spawn args '-Goutput_dir=.' npm error gyp info spawn args ] npm error gyp info spawn make npm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ] npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’ npm error 14 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0}); npm error | ^~~~ npm error | gpiod::line npm error In file included from /usr/include/gpiodcxx/chip.hpp:21, npm error from /usr/include/gpiod.hpp:27, npm error from ../cpp/opengpio.cpp:3: npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’ npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0}); npm error | ^~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not captured npm error 30 | bool value = line.get_value(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-default npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not captured npm error 34 | { line.release(); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-default npm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’ npm error 49 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’ npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not captured npm error 66 | line.set_value(value); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-default npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not captured npm error 69 | { line.release(); }); npm error | ^~~~ npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-default npm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: At global scope: npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a type npm error 81 | gpiod::line line; npm error | ^~~~ npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’ npm error 92 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’ npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not captured npm error 111 | bool value = line.get_value(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-default npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^ npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’ npm error 115 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’ npm error 127 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not captured npm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1)); npm error | ^~~~ npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-default npm error 124 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info) npm error | ^~~~ npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’? npm error 134 | gpiod::line_event event = line.event_read(); npm error | ^~~~~~~~~~ npm error | info_event npm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’? npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false; npm error | ^~~~~ npm error | servent npm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declared npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false; npm error | ^~~~~~~~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’ npm error 147 | data->line.release(); npm error | ^~~~ npm error ../cpp/opengpio.cpp: At global scope: npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a type npm error 168 | gpiod::line line; npm error | ^~~~ npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’: npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’ npm error 196 | gpiod::line line = chip.get_line(lineNumber); npm error | ^~~~ npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’ npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1); npm error | ^~~~~~~~~~~~~~~~ npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’ npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’? npm error 213 | data->line = line; npm error | ^~~~ npm error | gpiod::line npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here npm error 24 | namespace line { npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’ npm error 224 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not captured npm error 264 | line.set_value(true); npm error | ^~~~ npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default npm error 221 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not captured npm error 278 | line.set_value(false); npm error | ^~~~ npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default npm error 221 | [](uv_work_t *req) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error ../cpp/opengpio.cpp: In lambda function: npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’ npm error 327 | gpiod::line line = data->line; npm error | ^~~~ npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not captured npm error 328 | line.release(); npm error | ^~~~ npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-default npm error 324 | [](uv_work_t *req, int status) npm error | ^ npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here npm error 213 | data->line = line; npm error | ^~~~ npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1 npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2 npm error gyp ERR! stack at ChildProcess.onExit (/opt/iobroker/node_modules/node-gyp/lib/build.js:194:23) npm error gyp ERR! stack at ChildProcess.emit (node:events:519:28) npm error gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:293:12) npm error gyp ERR! System Linux 6.12.47+rpt-rpi-v8 npm error gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild" npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpio npm error gyp ERR! node -v v22.21.0 npm error gyp ERR! node-gyp -v v8.4.1 npm error gyp ERR! not ok npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-10T07_17_34_569Z-debug-0.log pi@IoBMaster:/opt/iobroker $ -
npm install :
pi@IoBMaster:/opt/iobroker $ npm install removed 69 packages in 24s 490 packages are looking for funding run `npm fund` for details pi@IoBMaster:/opt/iobroker $Jetzt sieht es gut aus. Der Fehler scheint behoben zu sein.
Danke euch für die Unterstützung.
-
npm install :
pi@IoBMaster:/opt/iobroker $ npm install removed 69 packages in 24s 490 packages are looking for funding run `npm fund` for details pi@IoBMaster:/opt/iobroker $Jetzt sieht es gut aus. Der Fehler scheint behoben zu sein.
Danke euch für die Unterstützung.
-
@Thomas-Braun sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:
Du musst dich in das Verzeichnis
/opt/zigbee2mqtt/
stellen.
Der Fehler ist verschwunden, trotzdem nochmal in /opt/zigbee2mqtt/ ausführen?
Zu früh gefreut, Fehler ist noch da.
pi@IoBMaster:/opt/zigbee2mqtt $ npm rebuild npm error code 127 npm error path /opt/zigbee2mqtt/node_modules/.pnpm/magicast@0.3.5/node_modules/magicast npm error command failed npm error command sh -c esno ./scripts/vendor.ts npm error sh: 1: esno: not found npm error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.logpi@IoBMaster:/opt/zigbee2mqtt $ npm install npm error Cannot read properties of null (reading 'matches') npm error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_22_260Z-debug-0.logpi@IoBMaster:~ $ tail /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.log 42 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/jackspeak@3.4.3/node_modules/jackspeak 1765351751604 43 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/minimatch@9.0.5/node_modules/minimatch 1765351751623 44 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/minipass@7.1.2/node_modules/minipass 1765351751636 45 verbose cwd /opt/zigbee2mqtt 46 verbose os Linux 6.12.47+rpt-rpi-v8 47 verbose node v22.21.0 48 verbose npm v10.9.4 49 verbose exit 127 50 verbose code 127 51 error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.log -
@Thomas-Braun sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:
Du musst dich in das Verzeichnis
/opt/zigbee2mqtt/
stellen.
Der Fehler ist verschwunden, trotzdem nochmal in /opt/zigbee2mqtt/ ausführen?
Zu früh gefreut, Fehler ist noch da.
pi@IoBMaster:/opt/zigbee2mqtt $ npm rebuild npm error code 127 npm error path /opt/zigbee2mqtt/node_modules/.pnpm/magicast@0.3.5/node_modules/magicast npm error command failed npm error command sh -c esno ./scripts/vendor.ts npm error sh: 1: esno: not found npm error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.logpi@IoBMaster:/opt/zigbee2mqtt $ npm install npm error Cannot read properties of null (reading 'matches') npm error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_22_260Z-debug-0.logpi@IoBMaster:~ $ tail /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.log 42 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/jackspeak@3.4.3/node_modules/jackspeak 1765351751604 43 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/minimatch@9.0.5/node_modules/minimatch 1765351751623 44 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/minipass@7.1.2/node_modules/minipass 1765351751636 45 verbose cwd /opt/zigbee2mqtt 46 verbose os Linux 6.12.47+rpt-rpi-v8 47 verbose node v22.21.0 48 verbose npm v10.9.4 49 verbose exit 127 50 verbose code 127 51 error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.logIch kenne z2m nicht genau. Musste mal schauen wie man das neubaut. Sollte sich auf deren Homepage finden.
-
Google wusste die Lösung:
Re-compiling Zigbee2MQTT (Z2M) usually means fixing issues after an update or dependency change, often involving clearing the node_modules folder and reinstalling packages (e.g., rm -rf node_modules && npm install or pnpm i) or running npm rebuild for specific modules if you encounter errors like unix_dgram. This process helps resolve issues with missing or broken native Node.js modules, ensuring Z2M runs smoothly, especially after core updates or system changes like a new Node.js version.
446
Online32.7k
Benutzer82.4k
Themen1.3m
Beiträge