Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Thomas Braun]

@Autodidakt sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:

ein Teil des Swap genutzt wird?

Weil das Speichermanagement des Kernels das als vorteilhaft erachtet.
Ist per se nicht schlimm oder bedenklich. Nur wenn das dauerhaft zu 100% gefüllt ist sollte man mal schauen.

[Autodidakt]

Nun bleibt noch ein Fehler:

z2m: Could not init sd_notify: The module '/opt/zigbee2mqtt/node_modules/.pnpm/unix-dgram@2.0.6/node_modules/unix-dgram/build/Release/unix_dgram.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 115. This version of Node.js requires NODE_MODULE_VERSION 127. Please try re-compiling or re-installing the module (for instance, using `npm rebuild` or `npm install`).

npm rebuild und npm install bringen keine Besserung.

*** NodeJS-Installation ***

/usr/bin/nodejs v22.21.0
/usr/bin/node v22.21.0
/usr/bin/npm 10.9.4
/usr/bin/npx 10.9.4
/usr/bin/corepack 0.34.0

[Thomas Braun]

@Autodidakt sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:

npm rebuild und npm install bringen keine Besserung

Was genau wo genau ausgeführt?

[Autodidakt]

npm rebuild und npm install im Raspberry Home verzeichnis

[Autodidakt]

War das das falsche Verzeichnis?

[Homoran]

@Autodidakt sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:

npm rebuild und npm install im Raspberry Home verzeichnis

was hast du da denn von npm drin?

[Autodidakt]

Vermutlich nichts, weil ein fehler kam.

[Homoran]

@Autodidakt sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:

Vermutlich nichts, weil ein fehler kam.

dann versuch es mal in /opt/iobroker

[Autodidakt]

sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:

npm rebuild

O weih...

pi@IoBMaster:/opt/iobroker $ npm rebuild
npm error code 1
npm error path /opt/iobroker/node_modules/opengpio
npm error command failed
npm error command sh -c node-gyp rebuild
npm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'
npm error   CXX(target) Release/obj.target/opengpio/cpp/opengpio.o
npm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'
npm error gyp info it worked if it ends with ok
npm error gyp info using node-gyp@8.4.1
npm error gyp info using node@22.21.0 | linux | arm64
npm error (node:186327) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
npm error (Use `node --trace-deprecation ...` to show where the warning was created)
npm error gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
npm error gyp info spawn /usr/bin/python3
npm error gyp info spawn args [
npm error gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
npm error gyp info spawn args   'binding.gyp',
npm error gyp info spawn args   '-f',
npm error gyp info spawn args   'make',
npm error gyp info spawn args   '-I',
npm error gyp info spawn args   '/opt/iobroker/node_modules/opengpio/build/config.gypi',
npm error gyp info spawn args   '-I',
npm error gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
npm error gyp info spawn args   '-I',
npm error gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.21.0/include/node/common.gypi',
npm error gyp info spawn args   '-Dlibrary=shared_library',
npm error gyp info spawn args   '-Dvisibility=default',
npm error gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.21.0',
npm error gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
npm error gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.21.0/<(target_arch)/node.lib',
npm error gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio',
npm error gyp info spawn args   '-Dnode_engine=v8',
npm error gyp info spawn args   '--depth=.',
npm error gyp info spawn args   '--no-parallel',
npm error gyp info spawn args   '--generator-output',
npm error gyp info spawn args   'build',
npm error gyp info spawn args   '-Goutput_dir=.'
npm error gyp info spawn args ]
npm error gyp info spawn make
npm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:
npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’
npm error    14 |     gpiod::line line = chip.get_line(lineNumber);
npm error       |                 ^~~~
npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
npm error    19 |         line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});
npm error       |         ^~~~
npm error       |         gpiod::line
npm error In file included from /usr/include/gpiodcxx/chip.hpp:21,
npm error                  from /usr/include/gpiod.hpp:27,
npm error                  from ../cpp/opengpio.cpp:3:
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’
npm error    19 |         line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});
npm error       |                                                          ^~~~~~~~~~~~~~~
npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
npm error    28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error       |                                                              gpiod::line
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not captured
npm error    30 |         bool value = line.get_value();
npm error       |                      ^~~~
npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-default
npm error    28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                                  ^
npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here
npm error    28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not captured
npm error    34 |                                                  { line.release(); });
npm error       |                                                    ^~~~
npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-default
npm error    33 |     Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                                   ^
npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared here
npm error    28 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:
npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’
npm error    49 |     gpiod::line line = chip.get_line(lineNumber);
npm error       |                 ^~~~
npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
npm error    54 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
npm error       |         ^~~~
npm error       |         gpiod::line
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’
npm error    54 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
npm error       |                                                          ^~~~~~~~~~~~~~~~
npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
npm error    63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error       |                                                              gpiod::line
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not captured
npm error    66 |         line.set_value(value); });
npm error       |         ^~~~
npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-default
npm error    63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                                  ^
npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here
npm error    63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not captured
npm error    69 |                                                  { line.release(); });
npm error       |                                                    ^~~~
npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-default
npm error    68 |     Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                                   ^
npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared here
npm error    63 |     Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error ../cpp/opengpio.cpp: At global scope:
npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a type
npm error    81 |     gpiod::line line;
npm error       |            ^~~~
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:
npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’
npm error    92 |     gpiod::line line = chip.get_line(lineNumber);
npm error       |                 ^~~~
npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
npm error   100 |         line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);
npm error       |         ^~~~
npm error       |         gpiod::line
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’
npm error   100 |         line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);
npm error       |                                                          ^~~~~~~~~~~~~~~~
npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
npm error   109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error       |                                                              gpiod::line
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not captured
npm error   111 |         bool value = line.get_value();
npm error       |                      ^~~~
npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-default
npm error   109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                                  ^
npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here
npm error   109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:
npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’
npm error   115 |     data->line = line;
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’
npm error   127 |             gpiod::line line = data->line;
npm error       |                         ^~~~
npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not captured
npm error   131 |                 bool hasEvent = line.event_wait(chrono::milliseconds(1));
npm error       |                                 ^~~~
npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-default
npm error   124 |         [](uv_work_t *req)
npm error       |          ^
npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared here
npm error   109 |     Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)
npm error       |                                                              ^~~~
npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?
npm error   134 |                     gpiod::line_event event = line.event_read();
npm error       |                            ^~~~~~~~~~
npm error       |                            info_event
npm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?
npm error   135 |                     bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;
npm error       |                                  ^~~~~
npm error       |                                  servent
npm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declared
npm error   135 |                     bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;
npm error       |                                                             ^~~~~~~~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’
npm error   147 |             data->line.release();
npm error       |                   ^~~~
npm error ../cpp/opengpio.cpp: At global scope:
npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a type
npm error   168 |     gpiod::line line;
npm error       |            ^~~~
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:
npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’
npm error   196 |     gpiod::line line = chip.get_line(lineNumber);
npm error       |                 ^~~~
npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
npm error   201 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
npm error       |         ^~~~
npm error       |         gpiod::line
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’
npm error   201 |         line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);
npm error       |                                                          ^~~~~~~~~~~~~~~~
npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’
npm error   213 |     data->line = line;
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?
npm error   213 |     data->line = line;
npm error       |                  ^~~~
npm error       |                  gpiod::line
npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared here
npm error    24 | namespace line {
npm error       |           ^~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’
npm error   224 |             gpiod::line line = data->line;
npm error       |                         ^~~~
npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not captured
npm error   264 |                 line.set_value(true);
npm error       |                 ^~~~
npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default
npm error   221 |         [](uv_work_t *req)
npm error       |          ^
npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
npm error   213 |     data->line = line;
npm error       |                  ^~~~
npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not captured
npm error   278 |                 line.set_value(false);
npm error       |                 ^~~~
npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-default
npm error   221 |         [](uv_work_t *req)
npm error       |          ^
npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
npm error   213 |     data->line = line;
npm error       |                  ^~~~
npm error ../cpp/opengpio.cpp: In lambda function:
npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’
npm error   327 |             gpiod::line line = data->line;
npm error       |                         ^~~~
npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not captured
npm error   328 |             line.release();
npm error       |             ^~~~
npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-default
npm error   324 |         [](uv_work_t *req, int status)
npm error       |          ^
npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared here
npm error   213 |     data->line = line;
npm error       |                  ^~~~
npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1
npm error gyp ERR! build error
npm error gyp ERR! stack Error: `make` failed with exit code: 2
npm error gyp ERR! stack     at ChildProcess.onExit (/opt/iobroker/node_modules/node-gyp/lib/build.js:194:23)
npm error gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
npm error gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
npm error gyp ERR! System Linux 6.12.47+rpt-rpi-v8
npm error gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpio
npm error gyp ERR! node -v v22.21.0
npm error gyp ERR! node-gyp -v v8.4.1
npm error gyp ERR! not ok
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-10T07_17_34_569Z-debug-0.log
pi@IoBMaster:/opt/iobroker $

[Autodidakt]

npm install :

pi@IoBMaster:/opt/iobroker $ npm install

removed 69 packages in 24s

490 packages are looking for funding
  run `npm fund` for details
pi@IoBMaster:/opt/iobroker $

Jetzt sieht es gut aus. Der Fehler scheint behoben zu sein.

Danke euch für die Unterstützung.

[Thomas Braun]

@Autodidakt

Du musst dich in das Verzeichnis

/opt/zigbee2mqtt/

stellen.

[Autodidakt]

@Thomas-Braun sagte in Raspi 5 - 8Gb Arbeitsspeicher läuft voll:

@Autodidakt

Du musst dich in das Verzeichnis

/opt/zigbee2mqtt/

stellen.

Der Fehler ist verschwunden, trotzdem nochmal in /opt/zigbee2mqtt/ ausführen?

Zu früh gefreut, Fehler ist noch da.

pi@IoBMaster:/opt/zigbee2mqtt $ npm rebuild
npm error code 127
npm error path /opt/zigbee2mqtt/node_modules/.pnpm/magicast@0.3.5/node_modules/magicast
npm error command failed
npm error command sh -c esno ./scripts/vendor.ts
npm error sh: 1: esno: not found
npm error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.log

pi@IoBMaster:/opt/zigbee2mqtt $ npm install
npm error Cannot read properties of null (reading 'matches')
npm error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_22_260Z-debug-0.log

pi@IoBMaster:~ $ tail /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.log
42 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/jackspeak@3.4.3/node_modules/jackspeak 1765351751604
43 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/minimatch@9.0.5/node_modules/minimatch 1765351751623
44 silly unfinished npm timer build:run:prepare:node_modules/.pnpm/minipass@7.1.2/node_modules/minipass 1765351751636
45 verbose cwd /opt/zigbee2mqtt
46 verbose os Linux 6.12.47+rpt-rpi-v8
47 verbose node v22.21.0
48 verbose npm  v10.9.4
49 verbose exit 127
50 verbose code 127
51 error A complete log of this run can be found in: /home/pi/.npm/_logs/2025-12-10T07_29_08_213Z-debug-0.log

[Thomas Braun]

@Autodidakt

Ich kenne z2m nicht genau. Musste mal schauen wie man das neubaut. Sollte sich auf deren Homepage finden.

[Autodidakt]

Google wusste die Lösung:

Re-compiling Zigbee2MQTT (Z2M) usually means fixing issues after an update or dependency change, often involving clearing the node_modules folder and reinstalling packages (e.g., rm -rf node_modules && npm install or pnpm i) or running npm rebuild for specific modules if you encounter errors like unix_dgram. This process helps resolve issues with missing or broken native Node.js modules, ensuring Z2M runs smoothly, especially after core updates or system changes like a new Node.js version.