Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Basti97]

@thomas-braun ok mache
jetzt ist die Meldung noch gekommen

adapter "s7" seems to be installed for a different version of Node.js. Trying to rebuild it... 3 attempt

[Basti97]

@thomas-braun

2025-11-09 17:03:45.976	error	Caught by controller[0]: /opt/iobroker/node_modules/bindings/bindings.js:135
host.SmartHomeMira
   2025-11-09 17:03:45.976	error	Caught by controller[0]: throw err;
host.SmartHomeMira
   2025-11-09 17:03:45.976	error	Caught by controller[0]: ^
host.SmartHomeMira
   2025-11-09 17:03:45.976	error	Caught by controller[0]: Error: Could not locate the bindings file. Tried:
host.SmartHomeMira
   2025-11-09 17:03:45.976	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/build/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.976	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/build/Debug/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.976	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/build/Release/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.976	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/out/Debug/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/Debug/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/out/Release/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/Release/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/build/default/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/compiled/22.21.0/linux/x64/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/addon-build/release/install-root/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/addon-build/debug/install-root/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/addon-build/default/install-root/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: → /opt/iobroker/node_modules/node-snap7/lib/binding/node-v127-linux-x64/node_snap7.node
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/bindings/bindings.js:126:9)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/node-snap7/lib/node-snap7.js:8:45)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1706:14)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at Object..js (node:internal/modules/cjs/loader:1839:10)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1441:32)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at Function._load (node:internal/modules/cjs/loader:1263:12)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at TracingChannel.traceSync (node:diagnostics_channel:328:14)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at wrapModuleLoad (node:internal/modules/cjs/loader:237:24)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1463:12)
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: at require (node:internal/modules/helpers:147:16) {
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: tries: [
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/build/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/build/Debug/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/build/Release/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/out/Debug/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/Debug/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/out/Release/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/Release/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/build/default/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/compiled/22.21.0/linux/x64/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/addon-build/release/install-root/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/addon-build/debug/install-root/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/addon-build/default/install-root/node_snap7.node',
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: '/opt/iobroker/node_modules/node-snap7/lib/binding/node-v127-linux-x64/node_snap7.node'
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: ]
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: }
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	Caught by controller[0]: Node.js v22.21.0
host.SmartHomeMira
   2025-11-09 17:03:45.977	error	instance system.adapter.s7.1 terminated with code 1 (JS_CONTROLLER_STOPPED)
host.SmartHomeMira
   2025-11-09 17:03:45.977	info	Adapter system.adapter.s7.1 needs rebuild and will be restarted afterwards.
host.SmartHomeMira
   2025-11-09 17:03:45.977	info	system.adapter.s7.1 will be rebuilt

[Thomas Braun]

@basti97

Auf einem aktuellen System baut das Ding jedenfalls:

echad@chet:~ $ iobroker add s7 --debug
NPM version: 11.6.1
Installing iobroker.s7@1.5.0... (System call)

> node-snap7@1.0.9 install
> prebuild-install || node-gyp rebuild

(node:231268) [DEP0176] DeprecationWarning: fs.R_OK is deprecated, use fs.constants.R_OK instead
(Use `node --trace-deprecation ...` to show where the warning was created)
prebuild-install warn install No prebuilt binaries found (target=24.11.0 runtime=node arch=arm64 libc= platform=linux)
gyp info it worked if it ends with ok
gyp info using node-gyp@11.4.2
gyp info using node@24.11.0 | linux | arm64
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp http GET https://s3-us-west-2.amazonaws.com/nodesource-public-downloads/24.11.0-ns6.0.2/artifacts/headers/krypton/v6.0.2/nsolid-v6.0.2-headers.tar.gz
gyp http 200 https://s3-us-west-2.amazonaws.com/nodesource-public-downloads/24.11.0-ns6.0.2/artifacts/headers/krypton/v6.0.2/nsolid-v6.0.2-headers.tar.gz
gyp http GET https://s3-us-west-2.amazonaws.com/nodesource-public-downloads/24.11.0-ns6.0.2/artifacts/headers/krypton/v6.0.2/SHASUMS256.txt
gyp http 200 https://s3-us-west-2.amazonaws.com/nodesource-public-downloads/24.11.0-ns6.0.2/artifacts/headers/krypton/v6.0.2/SHASUMS256.txt
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args 'binding.gyp',
gyp info spawn args '-f',
gyp info spawn args 'make',
gyp info spawn args '-I',
gyp info spawn args '/opt/iobroker/node_modules/node-snap7/build/config.gypi',
gyp info spawn args '-I',
gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
gyp info spawn args '-I',
gyp info spawn args '/home/iobroker/.cache/node-gyp/24.11.0/include/node/common.gypi',
gyp info spawn args '-Dlibrary=shared_library',
gyp info spawn args '-Dvisibility=default',
gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/24.11.0',
gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/24.11.0/<(target_arch)/node.lib',
gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/node-snap7',
gyp info spawn args '-Dnode_engine=v8',
gyp info spawn args '--depth=.',
gyp info spawn args '--no-parallel',
gyp info spawn args '--generator-output',
gyp info spawn args 'build',
gyp info spawn args '-Goutput_dir=.'
gyp info spawn args ]
gyp info spawn make
gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
make: Entering directory '/opt/iobroker/node_modules/node-snap7/build'
  CXX(target) Release/obj.target/snap7/deps/snap7/src/sys/snap_msgsock.o
  CXX(target) Release/obj.target/snap7/deps/snap7/src/sys/snap_sysutils.o
  CXX(target) Release/obj.target/snap7/deps/snap7/src/sys/snap_tcpsrvr.o
../deps/snap7/src/sys/snap_tcpsrvr.cpp: In member function ‘int TCustomMsgServer::StartTo(const char*, word)’:
../deps/snap7/src/sys/snap_tcpsrvr.cpp:429:12: warning: ‘char* strncpy(char*, const char*, size_t)’ specified bound 16 equals destination size [-Wstringop-truncation]
  429 |     strncpy(FLocalAddress, Address, 16);
      |     ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/snap7/deps/snap7/src/sys/snap_threads.o
  CXX(target) Release/obj.target/snap7/deps/snap7/src/core/s7_client.o
  CXX(target) Release/obj.target/snap7/deps/snap7/src/core/s7_isotcp.o
../deps/snap7/src/core/s7_isotcp.cpp: In member function ‘int TIsoTcpSocket::IsoConfirmConnection(u_char)’:
../deps/snap7/src/core/s7_isotcp.cpp:163:17: warning: variable ‘TempRef’ set but not used [-Wunused-but-set-variable]
  163 |         u_short TempRef;
      |                 ^~~~~~~
  CXX(target) Release/obj.target/snap7/deps/snap7/src/core/s7_partner.o
../deps/snap7/src/core/s7_partner.cpp: In member function ‘int TConnectionServer::StartTo(const char*)’:
../deps/snap7/src/core/s7_partner.cpp:252:12: warning: ‘char* strncpy(char*, const char*, size_t)’ specified bound 16 equals destination size [-Wstringop-truncation]
  252 |     strncpy(FLocalAddress,Address,16);
      |     ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/snap7/deps/snap7/src/core/s7_peer.o
  CXX(target) Release/obj.target/snap7/deps/snap7/src/core/s7_server.o
../deps/snap7/src/core/s7_server.cpp: In member function ‘byte TS7Worker::WriteArea(PReqFunWriteDataItem, PReqFunWriteItem, TEv&)’:
../deps/snap7/src/core/s7_server.cpp:626:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
  626 |     if ((ReqItemPar->Area==S7AreaTM) ^ (ReqItemPar->TransportSize==S7WLTimer))
      |     ^~
../deps/snap7/src/core/s7_server.cpp:629:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
  629 |         if ((ReqItemPar->Area==S7AreaCT) ^ (ReqItemPar->TransportSize==S7WLCounter))
      |         ^~
../deps/snap7/src/core/s7_server.cpp: In member function ‘void TS7Worker::SZLSystemState()’:
../deps/snap7/src/core/s7_server.cpp:1247:11: warning: ‘void* memcpy(void*, const void*, size_t)’ forming offset [4, 5] is out of the bounds [0, 4] of object ‘SZLNotAvail’ with type ‘byte [4]’ {aka ‘unsigned char [4]’} [-Warray-bounds=]
 1247 |     memcpy(SZL.ResData,&SZLNotAvail,sizeof(SZLSysState));
      |     ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../deps/snap7/src/core/s7_server.cpp:27:
../deps/snap7/src/core/s7_firmware.h:36:8: note: ‘SZLNotAvail’ declared here
   36 |   byte SZLNotAvail[4] = {
      |        ^~~~~~~~~~~
../deps/snap7/src/core/s7_server.cpp: In member function ‘word TS7Worker::ReadArea(PResFunReadItem, PReqFunReadItem, int&, TEv&)’:
../deps/snap7/src/core/s7_server.cpp:454:34: warning: ‘BitIndex’ may be used uninitialized [-Wmaybe-uninitialized]
  454 |           if ((ByteVal & BitMask[BitIndex])!=0)
      |                                  ^~~~~~~~
../deps/snap7/src/core/s7_server.cpp:332:10: note: ‘BitIndex’ was declared here
  332 |     byte BitIndex, ByteVal;
      |          ^~~~~~~~
../deps/snap7/src/core/s7_server.cpp: In member function ‘byte TS7Worker::WriteArea(PReqFunWriteDataItem, PReqFunWriteItem, TEv&)’:
../deps/snap7/src/core/s7_server.cpp:698:53: warning: ‘BitIndex’ may be used uninitialized [-Wmaybe-uninitialized]
  698 |                           *Target=*Target | BitMask[BitIndex];
      |                                                     ^~~~~~~~
../deps/snap7/src/core/s7_server.cpp:598:14: note: ‘BitIndex’ was declared here
  598 |         byte BitIndex;
      |              ^~~~~~~~
  CXX(target) Release/obj.target/snap7/deps/snap7/src/core/s7_text.o
../deps/snap7/src/core/s7_text.cpp: In function ‘char* EvtSrvText(TSrvEvent&, char*, int)’:
../deps/snap7/src/core/s7_text.cpp:782:5: warning: this ‘else’ clause does not guard... [-Wmisleading-indentation]
  782 |     else
      |     ^~~~
../deps/snap7/src/core/s7_text.cpp:785:9: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘else’
  785 |         strncpy(Result, S, TextLen);
      |         ^~~~~~~
  CXX(target) Release/obj.target/snap7/deps/snap7/src/core/s7_micro_client.o
../deps/snap7/src/core/s7_micro_client.cpp: In member function ‘void TSnap7MicroClient::SetConnectionParams(const char*, word, word)’:
../deps/snap7/src/core/s7_micro_client.cpp:2675:13: warning: ‘char* strncpy(char*, const char*, size_t)’ specified bound 16 equals destination size [-Wstringop-truncation]
 2675 |      strncpy(RemoteAddress, RemAddress, 16);
      |      ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../deps/snap7/src/core/s7_micro_client.cpp: In member function ‘int TSnap7MicroClient::SetSessionPassword(char*)’:
../deps/snap7/src/core/s7_micro_client.cpp:3306:16: warning: ‘char* strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
 3306 |         strncpy((char*)&opData,Password,L);
      |         ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
../deps/snap7/src/core/s7_micro_client.cpp:3298:26: note: length computed here
 3298 |         size_t L = strlen(Password);
      |                    ~~~~~~^~~~~~~~~~
  CXX(target) Release/obj.target/snap7/deps/snap7/src/lib/snap7_libmain.o
rm -f Release/obj.target/snap7.a Release/obj.target/snap7.a.ar-file-list; mkdir -p `dirname Release/obj.target/snap7.a`
ar crs Release/obj.target/snap7.a @Release/obj.target/snap7.a.ar-file-list
  COPY Release/snap7.a
  CXX(target) Release/obj.target/node_snap7/src/node_snap7.o
In file included from ../src/node_snap7_client.h:11,
                 from ../src/node_snap7.cpp:6:
../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8::Local<v8::Value>)’:
../../nan/nan.h:1173:36: warning: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ is deprecated: Use WriteUtf8V2 instead. [-Wdeprecated-declarations]
 1173 |         length_ = string->WriteUtf8(v8::Isolate::GetCurrent(), str_,
      |                   ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1174 |                                     static_cast<int>(len), 0, flags);
      |                                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-object.h:12,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-array-buffer.h:14,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8.h:24,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:74,
                 from ../src/node_snap7_client.h:10:
/home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-primitive.h:212:7: note: declared here
  212 |   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
      |       ^~~~~~~~~
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::Encode(const void*, size_t, Encoding)’:
../../nan/nan.h:2418:24: warning: ‘v8::Local<v8::Value> node::Encode(v8::Isolate*, const uint16_t*, size_t)’ is deprecated: Use TryEncode(...) instead [-Wdeprecated-declarations]
 2418 |     return node::Encode(
      |            ~~~~~~~~~~~~^
 2419 |         isolate
      |         ~~~~~~~         
 2420 |       , reinterpret_cast<const uint16_t *>(buf)
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2421 |       , len / 2);
      |       ~~~~~~~~~~        
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:1189:50: note: declared here
 1189 |                 NODE_EXTERN v8::Local<v8::Value> Encode(v8::Isolate* isolate,
      |                                                  ^~~~~~
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:117:42: note: in definition of macro ‘NODE_DEPRECATED’
  117 |     __attribute__((deprecated(message))) declarator
      |                                          ^~~~~~~~~~
../../nan/nan.h:2423:24: warning: ‘v8::Local<v8::Value> node::Encode(v8::Isolate*, const char*, size_t, encoding)’ is deprecated: Use TryEncode(...) instead [-Wdeprecated-declarations]
 2423 |     return node::Encode(
      |            ~~~~~~~~~~~~^
 2424 |         isolate
      |         ~~~~~~~         
 2425 |       , reinterpret_cast<const char *>(buf)
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2426 |       , len
      |       ~~~~~             
 2427 |       , node_enc);
      |       ~~~~~~~~~~~       
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:1181:38: note: declared here
 1181 |     NODE_EXTERN v8::Local<v8::Value> Encode(v8::Isolate* isolate,
      |                                      ^~~~~~
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:117:42: note: in definition of macro ‘NODE_DEPRECATED’
  117 |     __attribute__((deprecated(message))) declarator
      |                                          ^~~~~~~~~~
../src/node_snap7.cpp: At global scope:
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:1279:7: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
 1279 |       (node::addon_register_func) (regfunc),                          \
      |       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:1313:3: note: in expansion of macro ‘NODE_MODULE_X’
 1313 |   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
      |   ^~~~~~~~~~~~~
../src/node_snap7.cpp:16:1: note: in expansion of macro ‘NODE_MODULE’
   16 | NODE_MODULE(node_snap7, InitAll)
      | ^~~~~~~~~~~
  CXX(target) Release/obj.target/node_snap7/src/node_snap7_client.o
In file included from ../src/node_snap7_client.h:11,
                 from ../src/node_snap7_client.cpp:6:
../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8::Local<v8::Value>)’:
../../nan/nan.h:1173:36: warning: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ is deprecated: Use WriteUtf8V2 instead. [-Wdeprecated-declarations]
 1173 |         length_ = string->WriteUtf8(v8::Isolate::GetCurrent(), str_,
      |                   ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1174 |                                     static_cast<int>(len), 0, flags);
      |                                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-object.h:12,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-array-buffer.h:14,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8.h:24,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:74,
                 from ../src/node_snap7_client.h:10:
/home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-primitive.h:212:7: note: declared here
  212 |   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
      |       ^~~~~~~~~
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::Encode(const void*, size_t, Encoding)’:
../../nan/nan.h:2418:24: warning: ‘v8::Local<v8::Value> node::Encode(v8::Isolate*, const uint16_t*, size_t)’ is deprecated: Use TryEncode(...) instead [-Wdeprecated-declarations]
 2418 |     return node::Encode(
      |            ~~~~~~~~~~~~^
 2419 |         isolate
      |         ~~~~~~~         
 2420 |       , reinterpret_cast<const uint16_t *>(buf)
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2421 |       , len / 2);
      |       ~~~~~~~~~~        
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:1189:50: note: declared here
 1189 |                 NODE_EXTERN v8::Local<v8::Value> Encode(v8::Isolate* isolate,
      |                                                  ^~~~~~
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:117:42: note: in definition of macro ‘NODE_DEPRECATED’
  117 |     __attribute__((deprecated(message))) declarator
      |                                          ^~~~~~~~~~
../../nan/nan.h:2423:24: warning: ‘v8::Local<v8::Value> node::Encode(v8::Isolate*, const char*, size_t, encoding)’ is deprecated: Use TryEncode(...) instead [-Wdeprecated-declarations]
 2423 |     return node::Encode(
      |            ~~~~~~~~~~~~^
 2424 |         isolate
      |         ~~~~~~~         
 2425 |       , reinterpret_cast<const char *>(buf)
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2426 |       , len
      |       ~~~~~             
 2427 |       , node_enc);
      |       ~~~~~~~~~~~       
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:1181:38: note: declared here
 1181 |     NODE_EXTERN v8::Local<v8::Value> Encode(v8::Isolate* isolate,
      |                                      ^~~~~~
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:117:42: note: in definition of macro ‘NODE_DEPRECATED’
  117 |     __attribute__((deprecated(message))) declarator
      |                                          ^~~~~~~~~~
../src/node_snap7_client.cpp: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE node_snap7::S7Client::ListBlocksOfType(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/node_snap7_client.cpp:1689:42: warning: expression does not compute the number of elements in this array; element type is ‘word’ {aka ‘short unsigned int’}, not ‘PS7BlocksOfType’ {aka ‘short unsigned int (*)[8192]’} [-Wsizeof-array-div]
 1689 |   int BlockNum = sizeof(TS7BlocksOfType) / sizeof(PS7BlocksOfType);
      |                  ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
../src/node_snap7_client.cpp:1689:44: note: add parentheses around ‘sizeof (PS7BlocksOfType)’ to silence this warning
 1689 |   int BlockNum = sizeof(TS7BlocksOfType) / sizeof(PS7BlocksOfType);
      |                                            ^~~~~~~~~~~~~~~~~~~~~~~
      |                                            (                      )
  CXX(target) Release/obj.target/node_snap7/src/node_snap7_server.o
In file included from ../src/node_snap7_server.h:12,
                 from ../src/node_snap7_server.cpp:6:
../../nan/nan.h: In constructor ‘Nan::Utf8String::Utf8String(v8::Local<v8::Value>)’:
../../nan/nan.h:1173:36: warning: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ is deprecated: Use WriteUtf8V2 instead. [-Wdeprecated-declarations]
 1173 |         length_ = string->WriteUtf8(v8::Isolate::GetCurrent(), str_,
      |                   ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 1174 |                                     static_cast<int>(len), 0, flags);
      |                                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-object.h:12,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-array-buffer.h:14,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/v8.h:24,
                 from /home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:74,
                 from ../src/node_snap7_server.h:10:
/home/iobroker/.cache/node-gyp/24.11.0/include/node/v8-primitive.h:212:7: note: declared here
  212 |   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
      |       ^~~~~~~~~
../../nan/nan.h: In function ‘v8::Local<v8::Value> Nan::Encode(const void*, size_t, Encoding)’:
../../nan/nan.h:2418:24: warning: ‘v8::Local<v8::Value> node::Encode(v8::Isolate*, const uint16_t*, size_t)’ is deprecated: Use TryEncode(...) instead [-Wdeprecated-declarations]
 2418 |     return node::Encode(
      |            ~~~~~~~~~~~~^
 2419 |         isolate
      |         ~~~~~~~         
 2420 |       , reinterpret_cast<const uint16_t *>(buf)
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2421 |       , len / 2);
      |       ~~~~~~~~~~        
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:1189:50: note: declared here
 1189 |                 NODE_EXTERN v8::Local<v8::Value> Encode(v8::Isolate* isolate,
      |                                                  ^~~~~~
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:117:42: note: in definition of macro ‘NODE_DEPRECATED’
  117 |     __attribute__((deprecated(message))) declarator
      |                                          ^~~~~~~~~~
../../nan/nan.h:2423:24: warning: ‘v8::Local<v8::Value> node::Encode(v8::Isolate*, const char*, size_t, encoding)’ is deprecated: Use TryEncode(...) instead [-Wdeprecated-declarations]
 2423 |     return node::Encode(
      |            ~~~~~~~~~~~~^
 2424 |         isolate
      |         ~~~~~~~         
 2425 |       , reinterpret_cast<const char *>(buf)
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2426 |       , len
      |       ~~~~~             
 2427 |       , node_enc);
      |       ~~~~~~~~~~~       
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:1181:38: note: declared here
 1181 |     NODE_EXTERN v8::Local<v8::Value> Encode(v8::Isolate* isolate,
      |                                      ^~~~~~
/home/iobroker/.cache/node-gyp/24.11.0/include/node/node.h:117:42: note: in definition of macro ‘NODE_DEPRECATED’
  117 |     __attribute__((deprecated(message))) declarator
      |                                          ^~~~~~~~~~
../src/node_snap7_server.cpp: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE node_snap7::S7Server::RWBufferCallback(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/node_snap7_server.cpp:721:56: warning: comparison of integer expressions of different signedness: ‘size_t’ {aka ‘long unsigned int’} and ‘int’ [-Wsign-compare]
  721 |     if (node::Buffer::Length(info[0].As<v8::Object>()) < size) {
      |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
  CXX(target) Release/obj.target/node_snap7/src/snap7.o
  SOLINK_MODULE(target) Release/obj.target/node_snap7.node
  COPY Release/node_snap7.node
make: Leaving directory '/opt/iobroker/node_modules/node-snap7/build'
gyp info ok 

added 3 packages in 1m

250 packages are looking for funding
  run `npm fund` for details
host.chet install adapter s7
upload [5] s7.admin /opt/iobroker/node_modules/iobroker.s7/admin/assets/index-B2ytDdn0.js assets/index-B2ytDdn0.js application/javascript
upload [4] s7.admin /opt/iobroker/node_modules/iobroker.s7/admin/assets/index-Bd3GtHgn.css assets/index-Bd3GtHgn.css text/css
upload [3] s7.admin /opt/iobroker/node_modules/iobroker.s7/admin/favicon.ico favicon.ico image/vnd.microsoft.icon
upload [2] s7.admin /opt/iobroker/node_modules/iobroker.s7/admin/index_m.html index_m.html text/html
upload [1] s7.admin /opt/iobroker/node_modules/iobroker.s7/admin/manifest.json manifest.json application/json
upload [0] s7.admin /opt/iobroker/node_modules/iobroker.s7/admin/s7.png s7.png image/png
host.chet object system.adapter.s7 created/updated
Updating objects from io-package.json for adapter "s7" with version "1.5.0"
host.chet create instance s7
host.chet object system.adapter.s7.0.alive created
host.chet object system.adapter.s7.0.connected created
host.chet object system.adapter.s7.0.compactMode created
host.chet object system.adapter.s7.0.cpu created
host.chet object system.adapter.s7.0.cputime created
host.chet object system.adapter.s7.0.memHeapUsed created
host.chet object system.adapter.s7.0.memHeapTotal created
host.chet object system.adapter.s7.0.memRss created
host.chet object system.adapter.s7.0.uptime created
host.chet object system.adapter.s7.0.inputCount created
host.chet object system.adapter.s7.0.outputCount created
host.chet object system.adapter.s7.0.eventLoopLag created
host.chet object system.adapter.s7.0.sigKill created
host.chet object system.adapter.s7.0.logLevel created
host.chet object system.adapter.s7.0 created
echad@chet:~ $ 

[Basti97]

@thomas-braun was kann ich da jetzt machen?

[Thomas Braun]

@basti97

Wie bist du denn da insgesamt unterwegs?
Ausgabe von

iob diag

mal posten.

[Basti97]

@thomas-braun Das komische bevor ich nodejs von 20.x..x auf 22.x.x aktualisiert habe hat es funktoniert. Und es betrifft nur die beiden S7 Adapter.

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 11 (bullseye)
   Static hostname: SmartHomeMira
         Icon name: computer-vm
           Chassis: vm
    Virtualization: kvm
            Kernel: Linux 5.10.0-35-amd64
      Architecture: x86-64
OS is similar to:

model name      : Intel(R) Core(TM) i5-8259U CPU @ 2.30GHz
Docker          : false
Virtualization  : kvm
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 17:17:50 up 18 min,  2 users,  load average: 0.35, 0.30, 0.34
CPU threads: 2


*** LIFE CYCLE STATUS ***
Debian Release codenamed 'bullseye' reached its END OF LIFE and needs to be updated to the latest stable release 'trixie' NOW!

*** TIME AND TIMEZONES ***
               Local time: Sun 2025-11-09 17:17:51 CET
           Universal time: Sun 2025-11-09 16:17:51 UTC
                 RTC time: Sun 2025-11-09 16:17:52
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
mira
HOME=/home/mira
GROUPS=mira cdrom floppy sudo audio dip video plugdev netdev bluetooth scanner iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Display-Manager:        * gdm3.service - LSB: GNOME Display Manager
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.9G        2.5G        658M        0.0K        770M        1.2G
Swap:           974M        0.0K        974M
Total:          4.9G        2.5G        1.6G

Active iob-Instances:   26

         3921 M total memory
         2493 M used memory
          422 M active memory
         2624 M inactive memory
          658 M free memory
          164 M buffer memory
          605 M swap cache
          974 M total swap
            0 M used swap
          974 M free swap

*** top - Table Of Processes  ***
top - 17:17:51 up 18 min,  2 users,  load average: 0.35, 0.30, 0.34
Tasks: 136 total,   1 running, 135 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3921.4 total,    657.8 free,   2493.0 used,    770.5 buff/cache
MiB Swap:    975.0 total,    974.5 free,      0.5 used.   1189.9 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     393M  868K  392M   1% /run
/dev/sda1      ext4       31G   18G   12G  60% /
tmpfs          tmpfs     2.0G     0  2.0G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     393M   52K  393M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Nov  9 16:59:21 2025] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[Sun Nov  9 16:59:22 2025] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

Show mounted filesystems:
TARGET SOURCE    FSTYPE OPTIONS
/      /dev/sda1 ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
3.0G    /var/
1.5G    /var/cache/apt/archives
1.5G    /var/cache/apt
1.5G    /var/cache
1.3G    /var/log/journal/b10d7d2025ff4d469c4f8cc3d666e31e

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 112.0M in the file system.

/opt/iobroker/backups:
338M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
748M    /opt/iobroker/iobroker-data/
349M    /opt/iobroker/iobroker-data/files
267M    /opt/iobroker/iobroker-data/backup-objects
68M     /opt/iobroker/iobroker-data/files/vis-2
47M     /opt/iobroker/iobroker-data/files/admin.admin

The five largest files in iobroker-data are:
36M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/s7.admin/static/js/main.9f443724.js.map
18M     /opt/iobroker/iobroker-data/objects.json.migrated
18M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
12M     /opt/iobroker/iobroker-data/files/admin.0/zip/2024-06-29-scripts.zip

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.21.0
/usr/bin/node           v22.21.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.21.0-1nodesource1
  Candidate: 22.21.0-1nodesource1
  Version table:
 *** 22.21.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     22.20.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     12.22.12~dfsg-1~deb11u7 500
        500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
Media03             Media03 (version: 4.0.21, hostname: Media03       , alive, uptime: 1064)
Media04             Media04 (version: 7.0.6, hostname: Media04       , alive, uptime: 2810)
SmartHomeMira       SmartHomeMira (version: 7.0.6, hostname: SmartHomeMira , alive, uptime: 947)
dns-server-2-emilia dns-server-2-emilia (version: 2.2.9, hostname: dns-server-2-emilia, dead, uptime: 3983)
raspberrypi         raspberrypi (version: 7.0.6, hostname: raspberrypi   , dead, uptime: 84743)

Core adapters versions
js-controller:  7.0.6
admin:          7.7.19
javascript:     8.9.2

nodejs modules from github:     0

Adapter State
  system.adapter.accuweather.0            : accuweather           : SmartHomeMira                            - disabled
  system.adapter.adguard.0                : adguard               : SmartHomeMira                            - disabled
+ system.adapter.admin.0                  : admin                 : SmartHomeMira                            -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.admin.1                  : admin                 : SmartHomeMira                            -  enabled, port: 8089, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : SmartHomeMira                            -  enabled
+ system.adapter.asuswrt.1                : asuswrt               : SmartHomeMira                            -  enabled
+ system.adapter.backitup.0               : backitup              : SmartHomeMira                            -  enabled
+ system.adapter.backitup.1               : backitup              : Media04                                  -  enabled
  system.adapter.cloud.0                  : cloud                 : SmartHomeMira                            - disabled
  system.adapter.daswetter.0              : daswetter             : SmartHomeMira                            -  enabled
  system.adapter.discovery.0              : discovery             : SmartHomeMira                            - disabled
+ system.adapter.ds18b20.0                : ds18b20               : Media04                                  -  enabled
  system.adapter.dwd.0                    : dwd                   : SmartHomeMira                            -  enabled
  system.adapter.email.0                  : email                 : SmartHomeMira                            - disabled
  system.adapter.energiefluss.0           : energiefluss          : SmartHomeMira                            - disabled
  system.adapter.feiertage.0              : feiertage             : SmartHomeMira                            -  enabled
+ system.adapter.hass.0                   : hass                  : SmartHomeMira                            -  enabled, port: 8123
  system.adapter.ical.0                   : ical                  : SmartHomeMira                            - disabled
  system.adapter.icons-icons8.0           : icons-icons8          : SmartHomeMira                            -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : SmartHomeMira                            -  enabled
+ system.adapter.influxdb.0               : influxdb              : SmartHomeMira                            -  enabled, port: 8086
  system.adapter.iot.0                    : iot                   : SmartHomeMira                            - disabled
+ system.adapter.javascript.0             : javascript            : SmartHomeMira                            -  enabled
+ system.adapter.javascript.1             : javascript            : Media04                                  -  enabled
+ system.adapter.javascript.2             : javascript            : SmartHomeMira                            -  enabled
+ system.adapter.linux-control.0          : linux-control         : SmartHomeMira                            -  enabled
  system.adapter.mobile.0                 : mobile                : SmartHomeMira                            -  enabled
+ system.adapter.mqtt-client.0            : mqtt-client           : SmartHomeMira                            -  enabled, port: 8883
  system.adapter.mqtt.1                   : mqtt                  : SmartHomeMira                            - disabled, port: 8883, bind: 0.0.0.0
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : SmartHomeMira                            - disabled
  system.adapter.nina.0                   : nina                  : SmartHomeMira                            - disabled
+ system.adapter.node-red.0               : node-red              : SmartHomeMira                            -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.node-red.1               : node-red              : SmartHomeMira                            - disabled, port: 1881, bind: 0.0.0.0
+ system.adapter.ping.0                   : ping                  : SmartHomeMira                            -  enabled
  system.adapter.radar2.0                 : radar2                : Media04                                  - disabled
  system.adapter.rpi2.0                   : rpi2                  : Media03                                  -  enabled
  system.adapter.rpi2.3                   : rpi2                  : dns-server-2-emilia                      -  enabled
+ system.adapter.rpi2.4                   : rpi2                  : Media04                                  -  enabled
  system.adapter.s7.0                     : s7                    : SmartHomeMira                            -  enabled
  system.adapter.s7.1                     : s7                    : SmartHomeMira                            -  enabled
+ system.adapter.sonoff.0                 : sonoff                : SmartHomeMira                            -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sourceanalytix.0         : sourceanalytix        : SmartHomeMira                            -  enabled
+ system.adapter.telegram.0               : telegram              : SmartHomeMira                            -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.vis-2.0                  : vis-2                 : SmartHomeMira                            -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : SmartHomeMira                            -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : SmartHomeMira                            -  enabled
  system.adapter.vis-history.0            : vis-history           : SmartHomeMira                            -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : SmartHomeMira                            -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : SmartHomeMira                            -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : SmartHomeMira                            -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : SmartHomeMira                            -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : SmartHomeMira                            -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : SmartHomeMira                            -  enabled
  system.adapter.vis-metro.0              : vis-metro             : SmartHomeMira                            -  enabled
  system.adapter.vis-players.0            : vis-players           : SmartHomeMira                            -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : SmartHomeMira                            -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : SmartHomeMira                            -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : SmartHomeMira                            -  enabled
  system.adapter.vis.0                    : vis                   : SmartHomeMira                            -  enabled
  system.adapter.volumio.0                : volumio               : SmartHomeMira                            - disabled
+ system.adapter.web.0                    : web                   : SmartHomeMira                            -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.web.1                    : web                   : SmartHomeMira                            - disabled, port: 8090, bind: 0.0.0.0 (SSL), run as: benutzer
+ system.adapter.wled.0                   : wled                  : SmartHomeMira                            -  enabled
  system.adapter.yr.0                     : yr                    : SmartHomeMira                            - disabled
+ system.adapter.zigbee.0                 : zigbee                : Media04                                  -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : SmartHomeMira                            -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.admin.1                  : admin                 : SmartHomeMira                            -  enabled, port: 8089, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.hass.0                   : hass                  : SmartHomeMira                            -  enabled, port: 8123
+ system.adapter.influxdb.0               : influxdb              : SmartHomeMira                            -  enabled, port: 8086
+ system.adapter.mqtt-client.0            : mqtt-client           : SmartHomeMira                            -  enabled, port: 8883
+ system.adapter.node-red.0               : node-red              : SmartHomeMira                            -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : SmartHomeMira                            -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : SmartHomeMira                            -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : SmartHomeMira                            -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : Media04                                  -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
┌──────────────────────────────────────────────────────────────────────────────────────────────
│ (index) │ name     │ url                                                     │ auto upgrade │
├──────────────────────────────────────────────────────────────────────────────────────────────
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└──────────────────────────────────────────────────────────────────────────────────────────────

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "accuweather"  : 2.1.1    , installed 2.1.1
Adapter    "adguard"      : 1.0.1    , installed 1.0.1
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "asuswrt"      : 1.0.1    , installed 1.0.1
Adapter    "backitup"     : 3.3.10   , installed 3.3.5  [Updatable]
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "daswetter"    : 3.2.3    , installed 3.2.3
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "feiertage"    : 1.2.1    , installed 1.2.1
Adapter    "hass"         : 1.4.0    , installed 1.4.0
Adapter    "ical"         : 1.17.0   , installed 1.17.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 5.0.7    , installed 3.3.0  [Updatable]
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.7    , installed 7.0.6  [Updatable]
Adapter    "linux-control": 1.1.5    , installed 1.1.5
Adapter    "mobile"       : 1.0.1    , installed 1.0.1
Adapter    "mqtt"         : 6.1.4    , installed 6.1.2  [Updatable]
Adapter    "mqtt-client"  : 3.0.0    , installed 2.1.0  [Updatable]
Adapter    "netatmo-crawler": 1.1.0  , installed 1.1.0
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "node-red"     : 5.2.1    , installed 6.0.7
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "radar2"       : 2.4.0    , installed 2.4.0
Adapter    "rpi2"         : 2.4.0    , installed 2.4.0
Adapter    "s7"           : 1.5.0    , installed 1.4.3  [Updatable]
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.13.4   , installed 2.13.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.18.0   , installed 1.18.0
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "volumio"      : 0.2.0    , installed 0.2.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "wled"         : 0.7.2    , installed 0.7.2
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        16950
States:         16323

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          47735      7649/sshd: /usr/sbi
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       27158      4123/node-red
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       28978      4620/io.sonoff.0
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       25435      3885/iobroker.js-co
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       25430      3885/iobroker.js-co
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          1440       1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          47737      7649/sshd: /usr/sbi
tcp6       0      0 :::8089                 :::*                    LISTEN      1001       25539      3907/io.admin.1
tcp6       0      0 :::111                  :::*                    LISTEN      0          1444       1/init
tcp6       0      0 :::80                   :::*                    LISTEN      1001       27160      4123/node-red
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       26700      3952/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       28568      5005/io.web.0
udp        0      0 192.168.1.10:1900       0.0.0.0:*                           1001       27161      4123/node-red
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          1441       1/init
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       31220      5643/io.wled.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           109        13062      347/avahi-daemon: r
udp        0      0 0.0.0.0:42322           0.0.0.0:*                           109        13064      347/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          1447       1/init
udp6       0      0 fe80::a8d9:8dff:fee:546 :::*                                0          13868      361/NetworkManager
udp6       0      0 :::5353                 :::*                                109        13063      347/avahi-daemon: r
udp6       0      0 :::55042                :::*                                109        13065      347/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-11-09 17:08:54.031  - info: linux-control.0 (5431) getting data from AIDA_Luna (192.168.1.47:22)
2025-11-09 17:08:57.005  - info: linux-control.0 (5431) [getConnection] Host 'Media03_WZ_Radio' (192.168.1.33:22) seems not to be online
2025-11-09 17:08:57.100  - info: linux-control.0 (5431) [getConnection] Host 'AIDA_Luna' (192.168.1.47:22) seems not to be online
2025-11-09 17:09:19.662  - info: javascript.0 (3988) script.js.Wohnung.Motion_Detection.Flur_DBs_in_virtuelle: BWM neu: Bewegung erkannt
2025-11-09 17:09:19.665  - info: javascript.0 (3988) script.js.Wohnung.Motion_Detection.Flur_weißer_Ring_Ein__Aus_(Test): Ring weiß Aus (timeout stop)
2025-11-09 17:09:52.797  - info: javascript.0 (3988) script.js.Wohnung.Motion_Detection.Flur_DBs_in_virtuelle: BWM neu: Bewegung nicht mehr
2025-11-09 17:10:27.007  - info: host.SmartHomeMira instance system.adapter.daswetter.0 in version "3.2.3" started with pid 6745
2025-11-09 17:10:27.540  - info: daswetter.0 (6745) Sets unsupported
2025-11-09 17:10:27.801  - info: daswetter.0 (6745) starting. Version 3.2.3 in /opt/iobroker/node_modules/iobroker.daswetter, node: v22.21.0, js-controller: 7.0.6
2025-11-09 17:10:30.128  - info: daswetter.0 (6745) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2025-11-09 17:10:30.633  - info: daswetter.0 (6745) cleaned everything up...
2025-11-09 17:10:30.642  - info: host.SmartHomeMira instance system.adapter.daswetter.0 having pid 6745 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-11-09 17:13:22.953  - info: javascript.0 (3988) script.js.Wohnung.Motion_Detection.Flur_DBs_in_virtuelle: BWM neu: Bewegung erkannt
2025-11-09 17:13:22.956  - info: javascript.0 (3988) script.js.Wohnung.Motion_Detection.Flur_weißer_Ring_Ein__Aus_(Test): Ring weiß Aus (timeout stop)
2025-11-09 17:13:57.010  - info: linux-control.0 (5431) getting data from Media03_WZ_Radio (192.168.1.33:22)
2025-11-09 17:13:57.106  - info: linux-control.0 (5431) getting data from AIDA_Luna (192.168.1.47:22)
2025-11-09 17:13:57.751  - info: javascript.0 (3988) script.js.Wohnung.Motion_Detection.Flur_DBs_in_virtuelle: BWM neu: Bewegung nicht mehr
2025-11-09 17:14:00.076  - info: linux-control.0 (5431) [getConnection] Host 'Media03_WZ_Radio' (192.168.1.33:22) seems not to be online
2025-11-09 17:14:00.172  - info: linux-control.0 (5431) [getConnection] Host 'AIDA_Luna' (192.168.1.47:22) seems not to be online
2025-11-09 17:15:27.009  - info: host.SmartHomeMira instance system.adapter.daswetter.0 in version "3.2.3" started with pid 7247
2025-11-09 17:15:27.535  - info: daswetter.0 (7247) Sets unsupported
2025-11-09 17:15:27.818  - info: daswetter.0 (7247) starting. Version 3.2.3 in /opt/iobroker/node_modules/iobroker.daswetter, node: v22.21.0, js-controller: 7.0.6
2025-11-09 17:15:30.163  - info: daswetter.0 (7247) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2025-11-09 17:15:30.668  - info: daswetter.0 (7247) cleaned everything up...
2025-11-09 17:15:30.677  - info: host.SmartHomeMira instance system.adapter.daswetter.0 having pid 7247 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

============ Mark until here for C&P =============

iob diag has finished.

mira@SmartHomeMira:~$

[Ro75]

@basti97 sagte in s7 Adapter funktioniert nicht mehr noch node update:

Debian GNU/Linux 11 (bullseye)

Doch richtig gelesen - uralt.

Ro75.

[Basti97]

@thomas-braun

============ Mark until here for C&P =============

iob diag has finished.


mira@SmartHomeMira:~$ ========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 11 (bullseye)
   Static hostname: SmartHomeMira
         Icon name: computer-vm
           Chassis: vm
    Virtualization: kvm
            Kernel: Linux 5.10.0-35-amd64
      Architecture: x86-64
OS is similar to:

model name      : Intel(R) Core(TM) i5-8259U CPU @ 2.30GHz
Docker          : false
Virtualization  : kvm
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 17:17:50 up 18 min,  2 users,  load average: 0.35, 0.30, 0.34
mira@SmartHomeMira:~$.l here for C&P =============DAPTER_REQUESTED_TERMINATIO

[Basti97]

@ro75 Naja aber bevor ich nodejs aktualisiert habe hat es auch funktoniert und es betrifft ja nur den S7 Adapter zwei mal

[Thomas Braun]

@basti97 sagte in s7 Adapter funktioniert nicht mehr noch node update:

aktualisiert habe hat es funktoniert.

Da war es ja auch gegen nodejs@20 gebaut...

Jedenfalls ist

Operating System: Debian GNU/Linux 11 (bullseye)

zu alt. Installier da Debian 13 'Trixie'

[Basti97]

@thomas-braun Ok werde ich machen da installiere ich Linux komplett neu. Aber warum ensteht der Fehler nur bei den S7 Adapter und nicht bei allen Adaptern.

[Thomas Braun]

@basti97 sagte in s7 Adapter funktioniert nicht mehr noch node update:

nstalliere ich Linux komplett neu.

Dann aber diesmal gleich ohne Desktop.

Aber warum ensteht der Fehler nur bei den S7 Adapter und nicht bei allen Adaptern.

Das ist kein 'Fehler'. Du brauchst nur ein aktuelles System.
Und andere Adapter haben keine Bestandteile, die kompiliert werden müssen. Deswegen funktionieren die auch mit einer anderen ABI.

[Basti97]

@thomas-braun Achso ich hatte das ganze immer mit dem Desktop gemacht aber eigentlich braucht man ihn ja wirklich nicht da er ja auch zusätzliche Ressourcen verbraucht.

[Thomas Braun]

@basti97

Unter anderem auch das...

[Basti97]

@thomas-braun Gibt es noch mehr Vorteile ohne Desktop? Das muss ich ja bei der Installation den Haken bei Desktop rausmachen richtig?

[Thomas Braun]

@basti97

Du schleppst weniger Sicherheitslücken an (nicht laufender Code kann nicht angegriffen werden),
das Ding läuft stabiler (nicht laufender Code kann nicht abstürzen),
das System ist einfacher zu warten (nicht installierte Pakete machen die Abhängigkeiten übersichtlicher),
Versionsupgrades sind einfacher, weil man weniger Dinge berücksichtigen muss.

Usw...

[Basti97]

@thomas-braun Super vielen Dank da werde ich das ganze in den nächsten Tagen nochmal alles komplett neu installieren und das Iobroker Backup zurück spielen. Für jetzt habe ich erstmal das Snapshot bevor ich angefangen habe zurück gespielt damit derS7 Adapter erstmal wieder läuft.

Vielen Dank für deine schnelle und ausführliche Hilfe.
Ich wünsche dir noch einen schönen Sonntag

[Thomas Braun]

@basti97 sagte in s7 Adapter funktioniert nicht mehr noch node update:

das Snapshot bevor ich angefangen habe zurück gespielt

Warum nicht einfach nur nodejs@20 wieder installiert?

iob nodejs-update 20

und du wärst da gewesen.

[Basti97]

@thomas-braun joa das wäre eigentlich auch eine Möglichkeit aber ist es nicht theoretisch besser wenn dann das Linux neuzumachen. Dann hätte ich erstmal ruhe und ein bisschen Datenmüll weniger von Linux

[Thomas Braun]

@basti97

Dein OS musst du so oder so auf Stand bringen. Ob du dich über zwei Distributions-Upgrades quälst oder gleich alles 'neumachst' ist mir egal.
Ich wollte auch nur darauf hinweisen, das man wegen einem Downgrade von nodejs nicht umständlich ein Snapshot wieder reinrollt. Geht mit dem obigen Befehl meiner Meinung nach viel eleganter.