RPI-Monitor und GPIO rpi2 v2.3.1

Thomas Braun

Setz sowas bitte in </> Codetags. Und die ersten Zeilen fehlen.

Torsten Lehmann

@thomas-braun Guten Morgen nach erfolgreicher Installation rpi2 fehlt jedoch beim iobroker die rpi2 Instanz. Irgendwie mach ich wohl was falsch bei der iobroker Installation.

Thomas Braun

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Irgendwie mach ich wohl was falsch bei der iobroker Installation.

Nein, wenn Adapter via GitHub installiert werden muss die Instanz manuell hinzugefügt werden.

Torsten Lehmann

@thomas-braun said in RPI-Monitor und GPIO rpi2 v2.3.1:

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Irgendwie mach ich wohl was falsch bei der iobroker Installation.

Nein, wenn Adapter via GitHub installiert werden muss die Instanz manuell hinzugefügt werden.

da bin ich überfordert. Entschuldige, Wie mache ich das?

Thomas Braun

@torsten-lehmann

Mit dem PlusZeichen-Icon.
Steht auch 'Instanz hinzufügen' dran, wenn ich mich recht entsinne.

Homoran

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Wie mache ich das?

https://www.iobroker.net/#de/documentation/tutorial/adapter.md

sogar mit Filmchen

Torsten Lehmann

@thomas-braun weiterhin viele Warn und Error.
Notice #797?

pi@raspberrypi:~ $ iobroker url https://github.com/Grothesk242/ioBroker.rpi2.git --host raspberrypi --debug
install Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d
NPM version: 10.9.3
Installing Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d... (System call)
npm warn skipping integrity check for git dependency ssh://git@github.com/Grothesk242/ioBroker.rpi2.git
npm warn deprecated npmlog@4.1.2: This package is no longer supported.
npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.
npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supported
npm warn deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm warn deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm warn deprecated gauge@2.7.4: This package is no longer supported.

> iobroker.rpi2@2.4.0 preinstall
> sudo apt-get install -y libgpiod-dev || exit 0

Reading package lists...
Building dependency tree...
Reading state information...
libgpiod-dev is already the newest version (2.2.1-2).
The following package was automatically installed and is no longer required:
  libyuv0
Use 'sudo apt autoremove' to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

> @stoprocent/noble@1.19.1 install
> node-gyp-build

gyp info it worked if it ends with ok
gyp info using node-gyp@8.4.1
gyp info using node@22.20.0 | linux | arm64
(node:12953) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/@stoprocent/noble/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',
gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/@stoprocent/noble',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.'
gyp info spawn args ]
Traceback (most recent call last):
  File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>
    import gyp  # noqa: E402
    ^^^^^^^^^^
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>
    import gyp.input
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>
    from distutils.version import StrictVersion
ModuleNotFoundError: No module named 'distutils'
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)
gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
gyp ERR! System Linux 6.12.47+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noble
gyp ERR! node -v v22.20.0
gyp ERR! node-gyp -v v8.4.1
gyp ERR! not ok

> mdns@2.7.2 install
> node-gyp rebuild

gyp info it worked if it ends with ok
gyp info using node-gyp@8.4.1
gyp info using node@22.20.0 | linux | arm64
(node:12971) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/mdns/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',
gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/mdns',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.'
gyp info spawn args ]
Traceback (most recent call last):
  File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>
    import gyp  # noqa: E402
    ^^^^^^^^^^
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>
    import gyp.input
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>
    from distutils.version import StrictVersion
ModuleNotFoundError: No module named 'distutils'
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)
gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
gyp ERR! System Linux 6.12.47+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/mdns
gyp ERR! node -v v22.20.0
gyp ERR! node-gyp -v v8.4.1
gyp ERR! not ok

> node-dht-sensor@0.4.5 install
> node-gyp configure

gyp info it worked if it ends with ok
gyp info using node-gyp@8.4.1
gyp info using node@22.20.0 | linux | arm64
(node:12987) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-dht-sensor/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',
gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/node-dht-sensor',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.'
gyp info spawn args ]
Traceback (most recent call last):
  File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>
    import gyp  # noqa: E402
    ^^^^^^^^^^
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>
    import gyp.input
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>
    from distutils.version import StrictVersion
ModuleNotFoundError: No module named 'distutils'
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)
gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
gyp ERR! System Linux 6.12.47+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"
gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensor
gyp ERR! node -v v22.20.0
gyp ERR! node-gyp -v v8.4.1
gyp ERR! not ok

> opengpio@2.0.2 install
> node-gyp rebuild

gyp info it worked if it ends with ok
gyp info using node-gyp@8.4.1
gyp info using node@22.20.0 | linux | arm64
(node:13003) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/opengpio/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',
gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.'
gyp info spawn args ]
Traceback (most recent call last):
  File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>
    import gyp  # noqa: E402
    ^^^^^^^^^^
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>
    import gyp.input
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>
    from distutils.version import StrictVersion
ModuleNotFoundError: No module named 'distutils'
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)
gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
gyp ERR! System Linux 6.12.47+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/opengpio
gyp ERR! node -v v22.20.0
gyp ERR! node-gyp -v v8.4.1
gyp ERR! not ok
npm error code 1
npm error path /opt/iobroker/node_modules/opengpio
npm error command failed
npm error command sh -c node-gyp rebuild
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-20T11_05_16_554Z-debug-0.log
npm warn skipping integrity check for git dependency ssh://git@github.com/Grothesk242/ioBroker.rpi2.git
npm warn deprecated npmlog@4.1.2: This package is no longer supported.
npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.
npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supported
npm warn deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm warn deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm warn deprecated gauge@2.7.4: This package is no longer supported.
gyp info it worked if it ends with ok
gyp info using node-gyp@8.4.1
gyp info using node@22.20.0 | linux | arm64
(node:12953) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/@stoprocent/noble/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',
gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/@stoprocent/noble',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.'
gyp info spawn args ]
Traceback (most recent call last):
  File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>
    import gyp  # noqa: E402
    ^^^^^^^^^^
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>
    import gyp.input
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>
    from distutils.version import StrictVersion
ModuleNotFoundError: No module named 'distutils'
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)
gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
gyp ERR! System Linux 6.12.47+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noble
gyp ERR! node -v v22.20.0
gyp ERR! node-gyp -v v8.4.1
gyp ERR! not ok
gyp info it worked if it ends with ok
gyp info using node-gyp@8.4.1
gyp info using node@22.20.0 | linux | arm64
(node:12971) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/mdns/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',
gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/mdns',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.'
gyp info spawn args ]
Traceback (most recent call last):
  File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>
    import gyp  # noqa: E402
    ^^^^^^^^^^
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>
    import gyp.input
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>
    from distutils.version import StrictVersion
ModuleNotFoundError: No module named 'distutils'
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)
gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
gyp ERR! System Linux 6.12.47+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/mdns
gyp ERR! node -v v22.20.0
gyp ERR! node-gyp -v v8.4.1
gyp ERR! not ok
gyp info it worked if it ends with ok
gyp info using node-gyp@8.4.1
gyp info using node@22.20.0 | linux | arm64
(node:12987) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-dht-sensor/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',
gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/node-dht-sensor',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.'
gyp info spawn args ]
Traceback (most recent call last):
  File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>
    import gyp  # noqa: E402
    ^^^^^^^^^^
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>
    import gyp.input
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>
    from distutils.version import StrictVersion
ModuleNotFoundError: No module named 'distutils'
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)
gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
gyp ERR! System Linux 6.12.47+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"
gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensor
gyp ERR! node -v v22.20.0
gyp ERR! node-gyp -v v8.4.1
gyp ERR! not ok
gyp info it worked if it ends with ok
gyp info using node-gyp@8.4.1
gyp info using node@22.20.0 | linux | arm64
(node:13003) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
gyp info spawn /usr/bin/python3
gyp info spawn args [
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',
gyp info spawn args   'binding.gyp',
gyp info spawn args   '-f',
gyp info spawn args   'make',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/opengpio/build/config.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/opt/iobroker/node_modules/node-gyp/addon.gypi',
gyp info spawn args   '-I',
gyp info spawn args   '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',
gyp info spawn args   '-Dlibrary=shared_library',
gyp info spawn args   '-Dvisibility=default',
gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',
gyp info spawn args   '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',
gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',
gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio',
gyp info spawn args   '-Dnode_engine=v8',
gyp info spawn args   '--depth=.',
gyp info spawn args   '--no-parallel',
gyp info spawn args   '--generator-output',
gyp info spawn args   'build',
gyp info spawn args   '-Goutput_dir=.'
gyp info spawn args ]
Traceback (most recent call last):
  File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module>
    import gyp  # noqa: E402
    ^^^^^^^^^^
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module>
    import gyp.input
  File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module>
    from distutils.version import StrictVersion
ModuleNotFoundError: No module named 'distutils'
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack     at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)
gyp ERR! stack     at ChildProcess.emit (node:events:519:28)
gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:293:12)
gyp ERR! System Linux 6.12.47+rpt-rpi-v8
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/opengpio
gyp ERR! node -v v22.20.0
gyp ERR! node-gyp -v v8.4.1
gyp ERR! not ok
npm error code 1
npm error path /opt/iobroker/node_modules/opengpio
npm error command failed
npm error command sh -c node-gyp rebuild
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-20T11_05_16_554Z-debug-0.log
host.raspberrypi Cannot install Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d: 1

Thomas Braun

@torsten-lehmann

Was haste denn jetzt geändert?
Oben ist es doch durchgelaufen?

Torsten Lehmann

@thomas-braun wenn ich ein Backup zurücksetze geht rpi2 nicht mehr zu installieren. Bin jetzt gerade soweit hab SD Karte iobroker neue aufgesetzt rpi2 Adapter und Instanz funktioniert auch. Befürchte hole ich das gespeichert Backup zurück wird rpi2 nicht mehr funktionieren.

Thomas Braun

@torsten-lehmann

Hast du im Backup vielleicht einen sehr alten Versionsstand eingebacken?

Torsten Lehmann

@thomas-braun said in RPI-Monitor und GPIO rpi2 v2.3.1:

@torsten-lehmann

Hast du im Backup vielleicht einen sehr alten Versionsstand eingebacken?

Danke für Deine Geduld, vor dem zurücksetzen des Backups hab ich opt/iobroker/node_modules/iobroker.rpi2 gesichert und nach dem zurücksetzen des Backups wieder zurück gespeichert. rpi2 v2.4.0 lebenzeichen und mit Host verbunden.
Wenn es so bleibt, werde ich mich, um das Problem Zigbee upgrade von 2.0.5 auf 3.0.5 kümmern.

Thomas Braun

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

vor dem zurücksetzen des Backups hab ich opt/iobroker/node_modules/iobroker.rpi2 gesichert und nach dem zurücksetzen des Backups wieder zurück gespeichert.

Das macht man NICHT. Außer vielleicht unter anderen Betriebssystemen, aber auch da ist das Krampf.

Torsten Lehmann

@thomas-braun dachte ich mir schon. bekomme es nicht ohne Backup hin. Viele Adapter, Skripte usw. jahrelange Arbeit.

Thomas Braun

@torsten-lehmann

Durch das wüste hin- und herkopieren zerballerst du dir die 'npm-Versionsdatenbank'.
Kein Wunder, das dann alles ins Schleudern gerät.

Wie schaut denn deine Ausgangslage aus?
Generelle Vorgehensweise (bei allen Sprüngen): Alt-System auf den allerletzten Stand bringen, davon ein gescheites Backup ziehen (Backitup-Adapter!), neues Betriebssystem installieren, auf den letzten Stand bringen, iobroker leer installieren, in den leeren ioBroker das Backup einspielen.

Asgothian

@thomas-braun sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Wie schaut denn deine Ausgangslage aus?
Generelle Vorgehensweise (bei allen Sprüngen): Alt-System auf den allerletzten Stand bringen, davon ein gescheites Backup ziehen (Backitup-Adapter!), neues Betriebssystem installieren, auf den letzten Stand bringen, iobroker leer installieren, in den leeren ioBroker das Backup einspielen.

Da fehlt ein wichtiger Punkt. Da auch das auf Stand bringen schon Probleme erzeugen kann:

Backup (A) ziehen (So wie das System ist)
Auf den neusten möglichen Stand bringen, ohne das Betriebssystem hoch zu ziehen
Backup (B) ziehen
neues OS installieren
IoBroker installieren
Backup einspielen - wenn Möglich Backup B, im Notfall Backup A

A.

Torsten Lehmann

@asgothian said in RPI-Monitor und GPIO rpi2 v2.3.1:

@thomas-braun sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Wie schaut denn deine Ausgangslage aus?
Generelle Vorgehensweise (bei allen Sprüngen): Alt-System auf den allerletzten Stand bringen, davon ein gescheites Backup ziehen (Backitup-Adapter!), neues Betriebssystem installieren, auf den letzten Stand bringen, iobroker leer installieren, in den leeren ioBroker das Backup einspielen.

Da fehlt ein wichtiger Punkt. Da auch das auf Stand bringen schon Probleme erzeugen kann:

Backup (A) ziehen (So wie das System ist)

Auf den neusten möglichen Stand bringen, ohne das Betriebssystem hoch zu ziehen

Backup (B) ziehen

neues OS installieren

IoBroker installieren

Backup einspielen - wenn Möglich Backup B, im Notfall Backup A

A.

okay nutze neben das iobroker backup noch ein windows tool (iobroker Tool) um ein komplettes Backup zu erstellen. erstelle neue SD mit iobroker.

Torsten Lehmann

@asgothian
[How-to] ioBroker richtig installieren
sudo apt update && sudo apt upgrade -y
curl -sl https://deb.nodesource.com/setup_22.x | sudo bash -
sudo apt-get install -y build-essential libavahi-compat-libdnssd-dev libudev-dev libpam0g-dev nodejs
node -v && nodejs -v && npm -v
curl -sL https://iobroker.net/install.sh | bash -

Thomas Braun

@torsten-lehmann

Wo hast du denn das her?
Im Grunde reicht der Einzeiler:

curl -sLf https://iobroker.net/install.sh | bash -

Der Installer zieht dann auch nodejs usw. rein.

Thomas Braun

@asgothian

Naja, ein struppiges Backup (A) würde ich gar nicht einspielen. Die Installation wird ja nicht besser dadurch.
Also vorher die ganze Choose auf das richtige Gleis setzen.

Asgothian

@thomas-braun sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

@asgothian

Naja, ein struppiges Backup (A) würde ich gar nicht einspielen. Die Installation wird ja nicht besser dadurch.
Also vorher die ganze Choose auf das richtige Gleis setzen.

im ioBroker backup hast du keine Installationsdaten, sondern nur Konfiguration / und Daten. Da kommt vielleicht bei einzelnen Adaptern veraltete Konfigurationen rein - aber in den meisten Fällen kommt man damit brauchbar durch.

Und ich hab lieber ein Backup wo ich gezielt bestimmte dinge heraus nehmen kann als nix.

A.

Community Forum

NEWS

RPI-Monitor und GPIO rpi2 v2.3.1

Support us

813

32.4k

81.5k

1.3m