Wir empfehlen: Node.js 22.x
-
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: Pi5 Icon name: computer Kernel: Linux 6.6.47+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 11:33:50 up 51 min, 1 user, load average: 0.49, 0.43, 0.42 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-08-13 11:33:50 CEST Universal time: Wed 2025-08-13 09:33:50 UTC RTC time: Wed 2025-08-13 09:33:50 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': mike HOME=/home/mike GROUPS=mike adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 2.7G 3.6G 11M 2.3G 5.8G Swap: 209M 0B 209M Total: 8.6G 2.7G 3.8G Active iob-Instances: 21 8048 M total memory 2551 M used memory 2817 M active memory 1378 M inactive memory 3424 M free memory 163 M buffer memory 2017 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 11:33:51 up 51 min, 1 user, load average: 0.49, 0.43, 0.42 Tasks: 201 total, 1 running, 200 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 50.0 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8048.3 total, 3423.9 free, 2551.9 used, 2181.0 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 5496.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * nvmf-autoconnect.service loaded failed failed Connect NVMe-oF subsystems automatically during boot LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.8G 0 3.8G 0% /dev tmpfs tmpfs 1.6G 5.5M 1.6G 1% /run /dev/nvme0n1p2 ext4 229G 19G 199G 9% / tmpfs tmpfs 4.0G 5.6M 4.0G 1% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/nvme0n1p1 vfat 510M 66M 445M 13% /boot/firmware tmpfs tmpfs 805M 0 805M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Aug 13 10:42:34 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:32:C2:78 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=6fe73f65-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Aug 13 10:42:37 2025] EXT4-fs (nvme0n1p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Wed Aug 13 10:42:38 2025] EXT4-fs (nvme0n1p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p2 ext4 rw,noatime `-/boot/firmware /dev/nvme0n1p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 8.1G /var/ 3.6G /var/log 3.5G /var/log/journal/e2767c797fed49779b649eddbed462f7 3.5G /var/log/journal 3.1G /var/cache/apt Archived and active journals take up 3.4G in the file system. /opt/iobroker/backups: 108M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 229M /opt/iobroker/iobroker-data/ 123M /opt/iobroker/iobroker-data/files 84M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 20M /opt/iobroker/iobroker-data/objects.jsonl 8.6M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 3.7M /opt/iobroker/iobroker-data/files/javascript.admin/custom/assets/index-DXg_kRe6.js 3.7M /opt/iobroker/iobroker-data/files/hmip.admin/custom/assets/index-HTN9Fhdh.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_b44d6fa857a4ed1180ce8a582981d5c7-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.4 /usr/bin/node v20.19.4 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 nodejs: Installed: 20.19.4-1nodesource1 Candidate: 20.19.4-1nodesource1 Version table: *** 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Need to install the following packages: is-my-node-vulnerable@1.6.1 Ok to proceed? (y) y █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Pi5 Pi5 (version: 7.0.7, hostname: Pi5 , alive, uptime: 2342) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 9.0.11 nodejs modules from github: 2 +-- iobroker.govee-app@0.0.3 (git+ssh://git@github.com/TA2k/ioBroker.govee-app.git#f7848a9817a15db547dd5fc7f332822752d9bed6) `-- iobroker.zigbee@3.0.3 (git+ssh://git@github.com/ioBroker/ioBroker.zigbee.git#ff370acc5c61473cc0a008ff15a1f244a9bb73ee) Adapter State + system.adapter.admin.0 : admin : Pi5 - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.airquality.0 : airquality : Pi5 - disabled + system.adapter.ankersolix2.0 : ankersolix2 : Pi5 - enabled + system.adapter.backitup.0 : backitup : Pi5 - enabled + system.adapter.denon.0 : denon : Pi5 - enabled + system.adapter.enigma2.0 : enigma2 : Pi5 - enabled + system.adapter.govee-app.0 : govee-app : Pi5 - enabled system.adapter.govee-local.0 : govee-local : Pi5 - disabled + system.adapter.hmip.0 : hmip : Pi5 - enabled system.adapter.homeconnect.0 : homeconnect : Pi5 - disabled + system.adapter.hue.0 : hue : Pi5 - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : Pi5 - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : Pi5 - enabled, port: 8086 system.adapter.influxdb.2 : influxdb : Pi5 - disabled, port: 8086 + system.adapter.iot.0 : iot : Pi5 - enabled + system.adapter.javascript.0 : javascript : Pi5 - enabled system.adapter.lgtv.0 : lgtv : Pi5 - disabled + system.adapter.modbus.0 : modbus : Pi5 - enabled system.adapter.modbus.1 : modbus : Pi5 - disabled system.adapter.myuplink.0 : myuplink : Pi5 - disabled + system.adapter.rpi2.0 : rpi2 : Pi5 - enabled + system.adapter.shelly.0 : shelly : Pi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Pi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Pi5 - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : Pi5 - enabled, port: 1884, bind: 0.0.0.0 system.adapter.twinkly.0 : twinkly : Pi5 - disabled system.adapter.whatsapp-cmb.0 : whatsapp-cmb : Pi5 - disabled + system.adapter.zigbee.0 : zigbee : Pi5 - enabled, port: /dev/ttyUSB0 + system.adapter.zigbee.1 : zigbee : Pi5 - enabled, port: tcp://192.168.0.176:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Pi5 - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hue.0 : hue : Pi5 - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : Pi5 - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : Pi5 - enabled, port: 8086 + system.adapter.shelly.0 : shelly : Pi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : Pi5 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : Pi5 - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : Pi5 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.zigbee.0 : zigbee : Pi5 - enabled, port: /dev/ttyUSB0 + system.adapter.zigbee.1 : zigbee : Pi5 - enabled, port: tcp://192.168.0.176:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "airquality" : 0.1.5 , installed 0.1.5 Adapter "ankersolix2" : 2.2.0 , installed 2.2.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "enigma2" : 2.2.3 , installed 2.2.3 Adapter "govee-local" : 0.2.8 , installed 0.2.8 Adapter "hmip" : 1.27.0 , installed 1.27.0 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.6.0 , installed 3.6.0 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "lgtv" : 2.4.0 , installed 2.4.0 Adapter "modbus" : 6.4.0 , installed 6.4.0 Adapter "myuplink" : 0.8.4 , installed 0.8.4 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 10.1.0 , installed 10.1.0 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "twinkly" : 1.0.14 , installed 1.0.14 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "zigbee" : 3.0.3 , installed 3.0.3 Objects and States Please stand by - This may take a while Objects: 8338 States: 6601 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Done Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 66414 60339/io.sonoff.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 68265 61131/io.shelly.1 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 65007 59763/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 65002 59763/iobroker.js-c tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 999 6656 961/pihole-FTL tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 999 6655 961/pihole-FTL tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 999 1992 961/pihole-FTL tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6328 853/sshd: /usr/sbin tcp 0 0 127.0.0.1:61209 0.0.0.0:* LISTEN 0 7219 836/python3 tcp6 0 0 :::443 :::* LISTEN 999 6658 961/pihole-FTL tcp6 0 0 :::80 :::* LISTEN 999 6657 961/pihole-FTL tcp6 0 0 :::53 :::* LISTEN 999 1994 961/pihole-FTL tcp6 0 0 :::22 :::* LISTEN 0 6330 853/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 69944 61166/io.simple-api tcp6 0 0 :::8086 :::* LISTEN 995 6668 909/influxd tcp6 0 0 :::8081 :::* LISTEN 1001 63399 59781/io.admin.0 tcp6 0 0 :::3000 :::* LISTEN 106 6712 1025/grafana udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 1798 706/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 65490 60310/io.shelly.0 udp 0 0 0.0.0.0:43039 0.0.0.0:* 1001 137700 60310/io.shelly.0 udp 0 0 0.0.0.0:60398 0.0.0.0:* 104 1800 706/avahi-daemon: r udp 0 0 0.0.0.0:53 0.0.0.0:* 999 1991 961/pihole-FTL udp 0 0 0.0.0.0:123 0.0.0.0:* 999 9268 961/pihole-FTL udp6 0 0 :::5353 :::* 104 1799 706/avahi-daemon: r udp6 0 0 :::34332 :::* 104 1801 706/avahi-daemon: r udp6 0 0 :::53 :::* 999 1993 961/pihole-FTL udp6 0 0 :::123 :::* 999 5936 961/pihole-FTL *** Log File - Last 25 Lines *** 2025-08-13 11:33:15.110 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:33:32.234 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string" 2025-08-13 11:33:32.290 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string" 2025-08-13 11:33:32.334 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:33:35.920 - info: influxdb.0 (59873) Store 23 buffered influxDB history points 2025-08-13 11:33:55.130 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string" 2025-08-13 11:33:55.176 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string" 2025-08-13 11:33:55.232 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind" has to be type "number" but received type "string" 2025-08-13 11:33:55.274 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string" 2025-08-13 11:33:55.356 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string" 2025-08-13 11:33:55.403 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:34:05.921 - info: influxdb.0 (59873) Store 29 buffered influxDB history points 2025-08-13 11:34:11.383 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Info.Solarenergie_Woche" has to be type "number" but received type "string" 2025-08-13 11:34:12.170 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string" 2025-08-13 11:34:12.221 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string" 2025-08-13 11:34:12.272 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string" 2025-08-13 11:34:12.316 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string" 2025-08-13 11:34:12.358 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:34:29.105 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string" 2025-08-13 11:34:29.161 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string" 2025-08-13 11:34:29.235 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind" has to be type "number" but received type "string" 2025-08-13 11:34:29.282 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string" 2025-08-13 11:34:29.329 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string" 2025-08-13 11:34:29.378 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string" 2025-08-13 11:34:29.433 - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Sonnenstrahlung" has to be type "number" but received type "string"============ Mark until here for C&P =============
iob diag has finished.
mike@Pi5:~ $ ^C
mike@Pi5:~ $ -
Da fehlt der Anfang.
-
@thomas-braun
so nun alles einkopiert -
iob nodejs-updateist immer noch schweigsam?
Dann versuch mal
curl -L -o node-update.sh https://raw.githubusercontent.com/Grothesk242/ioBroker/refs/heads/master/node-update.sh && bash node-update.sh -
@thomas-braun
prima das script hat geholfen, jedoch gibt immer noch keine ausgaben bei iob diag und co... was das wohl ist -
@bigmike71 sagte in Wir empfehlen: Node.js 22.x:
jedoch gibt immer noch keine ausgaben bei iob diag und co... was das wohl ist
Was spuckt denn der curl-Befehl aus, wenn das nicht direkt in die bash gekippt wird?
Also nurcurl -L -o node-update.sh https://raw.githubusercontent.com/Grothesk242/ioBroker/refs/heads/master/node-update.sh -
mike@Pi5:~ $ curl -L -o node-update.sh https://raw.githubusercontent.com/Grothesk242/ioBroker/refs/heads/master/node-update.sh % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 13917 100 13917 0 0 65309 0 --:--:-- --:--:-- --:--:-- 65646 mike@Pi5:~ $ -
Nix zu sehen.
Auf meinem System funktioniert aber auch der direkte Aufruf viaiob diagoder
iob nodesjs-updateKeine Ahnung, was das dann bei dir ist.
-
-
@thomas-braun Es war gar nicht der Adapter, sondern zigbee2mqtt selbst. Sorry.
Sollte jetzt passen
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: iobroker Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.14.8-2-pve Architecture: x86-64 OS is similar to: model name : 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 12:08:39 up 1 min, 1 user, load average: 0.55, 0.61, 0.56 CPU threads: 2 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Wed 2025-08-13 12:08:39 CEST Universal time: Wed 2025-08-13 10:08:39 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': michael HOME=/home/michael GROUPS=michael sudo users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/michael GROUPS=iobroker tty dialout audio video plugdev redis *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.6G 1.1G 7.1G 1.6M 335M 7.5G Swap: 536M 0B 536M Total: 9.1G 1.1G 7.7G Active iob-Instances: 13 8192 M total memory 1080 M used memory 1230 M active memory 101 M inactive memory 6792 M free memory 0 M buffer memory 319 M swap cache 512 M total swap 0 M used swap 512 M free swap *** top - Table Of Processes *** top - 12:08:39 up 1 min, 1 user, load average: 0.55, 0.61, 0.56 Tasks: 47 total, 1 running, 46 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8192.0 total, 6791.5 free, 1081.9 used, 319.9 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 7110.1 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--100--disk--1 ext4 25G 4.9G 19G 21% / none tmpfs 492K 4.0K 488K 1% /dev /dev/mapper/pve-root ext4 67G 3.9G 60G 7% /dev/ttyACM0 udev devtmpfs 32G 0 32G 0% /dev/tty tmpfs tmpfs 32G 0 32G 0% /dev/shm tmpfs tmpfs 13G 152K 13G 1% /run tmpfs tmpfs 32G 1.4M 32G 1% /tmp tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 6.3G 8.0K 6.3G 1% /run/user/1001 Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--100--disk--1 ext4 rw,relatime,stripe=16 `-/dev/ttyACM0 /dev/mapper/pve-root[/var/lib/lxc/100/devices/ttyACM0] ext4 rw,relatime,errors=remount-ro Files in neuralgic directories: /var: 418M /var/ 214M /var/lib 130M /var/cache 126M /var/cache/apt 89M /var/lib/apt Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 24M in the file system. /opt/iobroker/backups: 1.8M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 92M /opt/iobroker/iobroker-data/ 56M /opt/iobroker/iobroker-data/files 38M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 38M /opt/iobroker/iobroker-data/files/admin.admin/custom 38M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 6.8M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-0fd47d.a444afaa.chunk.js 5.3M /opt/iobroker/iobroker-data/objects.jsonl 3.9M /opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.92169c09.chunk.js 3.7M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js 3.7M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-Drg0QIRU.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2432650-if00 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.18.0 /usr/bin/node v22.18.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.33.0 nodejs: Installed: 22.18.0-1nodesource1 Candidate: 22.18.0-1nodesource1 Version table: *** 22.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: iobroker iobroker (version: 7.0.6, hostname: iobroker , alive, uptime: 61) Core adapters versions js-controller: 7.0.6 admin: 7.6.17 javascript: 8.9.2 nodejs modules from github: 1 +-- iobroker.husqvarna-automower@0.6.0-beta.12 (git+ssh://git@github.com/ice987987/ioBroker.husqvarna-automower.git#e43328543d35c4555a4a3f3e595dd16417978d85) Adapter State + system.adapter.accuweather.0 : accuweather : iobroker - enabled + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.homeconnect.0 : homeconnect : iobroker - enabled + system.adapter.husqvarna-automower.0 : husqvarna-automower : iobroker - enabled system.adapter.ical.0 : ical : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.lovelace.0 : lovelace : iobroker - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.openknx.0 : openknx : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : iobroker - enabled + system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.lovelace.0 : lovelace : iobroker - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "accuweather" : 2.1.0 , installed 2.1.0 Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "lovelace" : 4.1.15 , installed 4.1.15 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee2mqtt" : 3.0.9 , installed 3.0.9 Objects and States Please stand by - This may take a while Objects: 18944 States: 7107 *** OS-Repositories and Updates *** W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://security.debian.org trixie-security InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:44527 0.0.0.0:* LISTEN 1000 2961001 535/io.yahka.0 tcp 0 0 127.0.0.1:45247 0.0.0.0:* LISTEN 1000 2961005 535/io.yahka.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 107 2954068 320/mosquitto tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 2949013 1/init tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 2954254 288/master tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 105 2951043 146/redis-server 12 tcp 0 0 127.0.0.1:40947 0.0.0.0:* LISTEN 1000 2961009 535/io.yahka.0 tcp6 0 0 ::1:6379 :::* LISTEN 105 2951044 146/redis-server 12 tcp6 0 0 ::1:25 :::* LISTEN 0 2954255 288/master tcp6 0 0 :::8082 :::* LISTEN 1000 2951844 565/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1000 2951332 338/io.admin.0 tcp6 0 0 :::8091 :::* LISTEN 1000 2955216 520/io.lovelace.0 tcp6 0 0 :::35035 :::* LISTEN 1000 2951772 535/io.yahka.0 tcp6 0 0 :::1883 :::* LISTEN 107 2954069 320/mosquitto tcp6 0 0 :::33309 :::* LISTEN 1000 2951776 535/io.yahka.0 tcp6 0 0 :::111 :::* LISTEN 0 2949015 1/init tcp6 0 0 :::22 :::* LISTEN 0 2953518 1/init tcp6 0 0 :::41839 :::* LISTEN 1000 2951774 535/io.yahka.0 udp 0 0 0.0.0.0:60413 0.0.0.0:* 106 2950882 131/avahi-daemon: r udp 0 0 0.0.0.0:111 0.0.0.0:* 0 2949014 1/init udp 0 0 0.0.0.0:34687 0.0.0.0:* 1000 2955115 475/io.openknx.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 106 2950880 131/avahi-daemon: r udp6 0 0 :::111 :::* 0 2949016 1/init udp6 0 0 :::5353 :::* 106 2950881 131/avahi-daemon: r udp6 0 0 :::41093 :::* 106 2950883 131/avahi-daemon: r *** Log File - Last 25 Lines *** -
Das haste aber jetzt auch nicht per
iob nodejs-updategemacht, oder?
Das müsste nämlich dann eigentlich anders aussehen. -
Hallo.
Habe jetzt mein Multihostsystem auch auf Nodejs22.
1 Host (RPI5) und 2 Slaves (RPI4/RPI3)
Der CanBus Adapter wollte erst nicht, Erst nach deinstallation und neubau lief der dann auch.
Danke an Alle für die Tips und Tricks hier.Gruß
ag -
@thomas-braun Doch, das habe ich.
Wie müsste es denn aussehen bzw. wie kann ich es korrigieren? -
@lessthanmore sagte in Wir empfehlen: Node.js 22.x:
Wie müsste es denn aussehen bzw. wie kann ich es korrigieren?
Kannste so lassen. Ist nicht ganz verkehrt. nodejs-update sollte eigentlich das Paket nodejs mit ganz hoher Priority (1001) führen. Bei dir ist es 'nur' mit 600 eingestellt. Macht aber nix, ist immer noch höhere Prio als der Standard (500).
Das könnte allerdings auch der Grund sein, warum das bei dir so komisch reagiert, Prio 1001 knallt diese Versionen ohne Rücksicht auf Verluste auf jedenfall rein, 600 ist nicht ganz so aggressiv.
-
@thomas-braun
Alles klar, dann werde ich das versuchen.Danke und Gruß, Michael
-
@thomas-braun said in Wir empfehlen: Node.js 22.x:
ls -la /home
mike@Pi5:~ $ ls -la /home total 36 drwxr-xr-x 5 root root 4096 Sep 9 2024 . drwxr-xr-x 18 root root 4096 Jul 4 2024 .. drwxr-xr-x 2 root root 20480 Apr 18 17:25 backup drwxr-xr-x 4 mike **** 4096 Jul 15 18:04 iobroker drwx------ 12 mike **** 4096 Aug 13 11:48 mike mike@Pi5:~ $so siehts aus.
hast du zufällig auch ein bash script für den iob fix, der macht auch nix mehr, früher gings... -
Haste die **** da selber reingeschrieben oder ist das so?
Da sind eh die Rechte verbogen. /home/iobroker muss natürlich auch dem iobroker gehörten und NICHT dem mike.
-
@bigmike71 sagte in Wir empfehlen: Node.js 22.x:
früher gings...
Bevor du dir die Rechte zerballert hast...
sudo chown -R iobroker:iobroker /home/iobrokerDas Verzeichnis
drwxr-xr-x 2 root root 20480 Apr 18 17:25 backupdarf es da auch nicht geben. Oder hast du einen user namens 'backup', der irgendwas tut?
Aber dann hätte der die falschen Rechte, der Kram würde dann nicht root gehören. Der hat ein eigenes Home unter /root
Also komplett alles irgendwie durcheinandergeschossen. -
@thomas-braun said in Wir empfehlen: Node.js 22.x:
sudo chown -R iobroker:iobroker /home/iobroker
kann ich mir damit was kaputt machen? gibt es einen weg notfalls zurück?
keine ahnung warum die rechte so sind, hatte eine normale installation seinerzeit gemacht über ssh -
@bigmike71 sagte in Wir empfehlen: Node.js 22.x:
kann ich mir damit was kaputt machen? gibt es einen weg notfalls zurück?
Das IST doch schon alles kaputt gefummelt. Mit dem Befehl stellst du das wieder richtig, sodass auch der Befehle wie
iob diagundiob nodejs-updatewieder funktionieren können. Grund bei dir ist: Die Skripte können nicht heruntergeladen werden, weil der user 'iobroker' in sein eigenes Zuhause nicht reinkommt, weil da jemand an der Tür das Schloss getauscht hat.keine ahnung warum die rechte so sind, hatte eine normale installation seinerzeit gemacht über ssh
Und irgendwann danach hast DU die Rechte zerballert. Der user 'iobroker' wird natürlich erstmal mit den richtigen Rechten angelegt.
