Test Dreame Home Adapter

Alexander Grebe

Hallo Community,

ich habe einen Dreame L10s Ultra im Einsatz, den ich versuche im ioBroker zum Laufen zu bringen. Zunächst habe ich das mit dem Dreame Adapter versucht (was so "halb" ging) und jetzt habe ich den Dreamhome Dapter über die Katze von github installiert.
Beim ersten Starten des Adapters ging der auch auf "grün". Allerdings haben da noch die Maps gefehlt. Ich habe darauf (wie in der Anleitung beschrieben) dreamehome.0.xxxxxxxx.map.NewMap auf true gesetzt. Seitdem startet der Adapter nicht mehr richtig mit folgenden Fehler-Meldungen:

host.raspyDocker
	2025-02-22 12:11:40.055	info	Restart adapter system.adapter.dreamehome.0 because enabled
host.raspyDocker
	2025-02-22 12:11:40.055	error	instance system.adapter.dreamehome.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
dreamehome.0
	2025-02-22 12:11:39.820	info	Connection to MQTT successfully established
dreamehome.0
	2025-02-22 12:11:39.507	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason
dreamehome.0
	2025-02-22 12:11:39.506	info	terminating
dreamehome.0
	2025-02-22 12:11:39.506	info	cleaned everything up...
dreamehome.0
	2025-02-22 12:11:39.504	error	Cannot read properties of undefined (reading 'storeys')
dreamehome.0
	2025-02-22 12:11:39.504	error	TypeError: Cannot read properties of undefined (reading 'storeys') at Dreamehome.DH_GetSetRooms (/opt/iobroker/node_modules/iobroker.dreamehome/main.js:1805:54) at Dreamehome.onReady (/opt/iobroker/node_modules/iobroker.dreamehome/main.js:1428:15)
dreamehome.0
	2025-02-22 12:11:39.503	error	unhandled promise rejection: Cannot read properties of undefined (reading 'storeys')
dreamehome.0
	2025-02-22 12:11:39.503	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
dreamehome.0
	2025-02-22 12:11:39.424	info	Die aktuell eingestellte Standard-Kartennummer ist eingestellt auf 0
dreamehome.0
	2025-02-22 12:11:39.376	info	Set and update Volume value to: 21
dreamehome.0
	2025-02-22 12:11:39.327	info	Set and update Live Video Prompts value to: 0
dreamehome.0
	2025-02-22 12:11:39.278	info	Set and update Clean Route value to: 0
dreamehome.0
	2025-02-22 12:11:39.230	info	Set and update Collision-Avoidance Mode value to: 0
dreamehome.0
	2025-02-22 12:11:39.182	info	Set and update Fill Light value to: 0
dreamehome.0
	2025-02-22 12:11:39.134	info	Set and update Intensive Cleaning for Furniture Legs value to: 0
dreamehome.0
	2025-02-22 12:11:39.087	info	Set and update Mop Extension for Gap cleaning value to: 0
dreamehome.0
	2025-02-22 12:11:39.039	info	Set and update AI driven MopExtend value to: 0
dreamehome.0
	2025-02-22 12:11:38.991	info	Set and update Intensive Carpet cleaning value to: 0
dreamehome.0
	2025-02-22 12:11:38.943	info	Set and update Carpet Boost value to: 0
dreamehome.0
	2025-02-22 12:11:38.895	info	Set and update Auto recleaning value to: 0
dreamehome.0
	2025-02-22 12:11:38.847	info	Set and update Auto Rewashing value to: 0
dreamehome.0
	2025-02-22 12:11:38.795	info	Set and update Clean Genius value to: 0
dreamehome.0
	2025-02-22 12:11:38.746	info	Set and update Auto mount mop value to: 0
dreamehome.0
	2025-02-22 12:11:38.741	info	Set and update Auto add detergent value to: null
dreamehome.0
	2025-02-22 12:11:38.736	info	Set and update Child lock value to: 0
dreamehome.0
	2025-02-22 12:11:38.731	info	Set and update Resume Cleane Mode value to: 1
dreamehome.0
	2025-02-22 12:11:38.682	info	Die Karte wurde erfolgreich aus der Cloud heruntergeladen
dreamehome.0
	2025-02-22 12:11:38.675	info	Die aktuell eingestellte Standard-Kartennummer ist eingestellt auf 0
dreamehome.0
	2025-02-22 12:11:38.171	info	Get and update Camera light value to: "0"
dreamehome.0
	2025-02-22 12:11:37.933	info	Get and update Stream status value to: "{\"operType\":\"end\",\"operation\":\"monitor\",\"result\":0,\"status\":0}"
dreamehome.0
	2025-02-22 12:11:37.730	info	Get and update Detergent time left value to: "18"
dreamehome.0
	2025-02-22 12:11:37.695	info	Get and update Detergent left value to: "100"
dreamehome.0
	2025-02-22 12:11:37.557	info	Get and update Mop pad time left value to: "0"
dreamehome.0
	2025-02-22 12:11:37.482	info	Get and update Mop pad left value to: "0"
dreamehome.0
	2025-02-22 12:11:37.405	info	Get and update Sensor dirty time left value to: "24"
dreamehome.0
	2025-02-22 12:11:37.329	info	Get and update Sensor dirty left value to: "80"
dreamehome.0
	2025-02-22 12:11:37.253	info	Get and update Auto empty status value to: "0"
dreamehome.0
	2025-02-22 12:11:37.220	info	Get and update Dust collection value to: "1"
dreamehome.0
	2025-02-22 12:11:36.874	info	Get and update Filter time left value to: "38"
dreamehome.0
	2025-02-22 12:11:36.798	info	Get and update Filter left value to: "25"
dreamehome.0
	2025-02-22 12:11:36.722	info	Get and update Side brush left value to: "44"
dreamehome.0
	2025-02-22 12:11:36.645	info	Get and update Side brush time left value to: "88"
dreamehome.0
	2025-02-22 12:11:36.570	info	Get and update Main brush left value to: "62"
dreamehome.0
	2025-02-22 12:11:36.537	info	Get and update Main brush time left value to: "188"
dreamehome.0
	2025-02-22 12:11:36.472	info	Get and update Schedule cancel reason value to: "0"
dreamehome.0
	2025-02-22 12:11:36.366	info	Get and update Schedule value to: "2-1-08:25-0100000-1-0-0-0-0;1-3-08:50-0010100-1-6-0-0-78081,78082;4-3-11:00-0000000-0-6-0-0-2171137;6-0-11:04-0000000-0-34-0-0-78082,78081;5-0-12:01-0000000-0-6-0-0-78083,78081;3-3-12:17-0000000-0-6-0-0-78081,78082,78083;9-0-12:40-0000000-0-34-0-0-78081,78082;10-0-13:34-0000000-0-34-0-0-78082,78081;7-0-14:21-0000000-0-34-0-0-2175233;8-0-14:35-0000000-0-34-0-0-78082"
dreamehome.0
	2025-02-22 12:11:36.331	info	Get and update Timezone value to: "Europe/Berlin"
dreamehome.0
	2025-02-22 12:11:36.203	info	Get and update Volume value to: "21"
dreamehome.0
	2025-02-22 12:11:35.929	info	Get and update Map list value to: "{\"obj_name\":\"ali_dreame/FN759768/760380477/9\",\"md5\":\"9c3a8b002314dada5808154865eec5de\"}"
dreamehome.0
	2025-02-22 12:11:35.892	info	Get and update Multi floor map value to: "1"
dreamehome.0
	2025-02-22 12:11:35.767	info	Get and update Object name value to: "ali_dreame/FN759768/760380477/0"
dreamehome.0
	2025-02-22 12:11:35.367	info	Get and update Mop pad installed value to: "0"
dreamehome.0
	2025-02-22 12:11:35.289	info	Get and update Mop in station value to: "0"
dreamehome.0
	2025-02-22 12:11:35.254	info	Get and update Auto water refilling value to: "0"
dreamehome.0
	2025-02-22 12:11:35.139	info	Get and update Intelligent recognition value to: "0"
dreamehome.0
	2025-02-22 12:11:35.060	info	Get and update Quick command value to: "[]"
dreamehome.0
	2025-02-22 12:11:34.979	info	Get and update Scheduled clean value to: "0"
dreamehome.0
	2025-02-22 12:11:34.899	info	Get and update Mop wash level value to: "1"
dreamehome.0
	2025-02-22 12:11:34.819	info	Get and update Auto mount mop value to: "0"
dreamehome.0
	2025-02-22 12:11:34.743	info	Get and update Low water warning value to: "0"
dreamehome.0
	2025-02-22 12:11:34.667	info	Get and update Drying time value to: "2"
dreamehome.0
	2025-02-22 12:11:34.634	info	Get and update Save water tips value to: "0"
dreamehome.0
	2025-02-22 12:11:34.556	info	Get and update Capability value to: "1"
dreamehome.0
	2025-02-22 12:11:34.478	info	Get and update Auto add detergent value to: "2"
dreamehome.0
	2025-02-22 12:11:34.402	info	Get and update Carpet avoidance value to: "2"
dreamehome.0
	2025-02-22 12:11:34.327	info	Get and update Warn status value to: "101"
dreamehome.0
	2025-02-22 12:11:34.250	info	Get and update Self clean value to: "1"
dreamehome.0
	2025-02-22 12:11:34.216	info	Get and update Carpet recognition value to: "1"
dreamehome.0
	2025-02-22 12:11:34.111	info	Get and update Y clean value to: "0"
dreamehome.0
	2025-02-22 12:11:34.035	info	Get and update Cleaning cancel value to: "1"
dreamehome.0
	2025-02-22 12:11:33.959	info	Get and update Tight mopping value to: "0"
dreamehome.0
	2025-02-22 12:11:33.881	info	Get and update Carpet sensitivity value to: "2"
dreamehome.0
	2025-02-22 12:11:33.807	info	Get and update Child lock value to: "0"
dreamehome.0
	2025-02-22 12:11:33.730	info	Get and update Customized cleaning value to: "0"
dreamehome.0
	2025-02-22 12:11:33.654	info	Get and update Self wash base status value to: "2"
dreamehome.0
	2025-02-22 12:11:33.578	info	Get and update Upload map value to: "1"
dreamehome.0
	2025-02-22 12:11:33.499	info	Get and update Cleaning mode value to: "70656"
dreamehome.0
	2025-02-22 12:11:33.465	info	Get and update Ai detection value to: "7"
dreamehome.0
	2025-02-22 12:11:33.401	info	Get and update Relocation status value to: "0"
dreamehome.0
	2025-02-22 12:11:33.294	info	Get and update Faults value to: "0"
dreamehome.0
	2025-02-22 12:11:33.260	info	Get and update Cleaning paused value to: "0"
dreamehome.0
	2025-02-22 12:11:33.055	info	Get and update Carpet boost value to: "1"
dreamehome.0
	2025-02-22 12:11:33.018	info	Get and update Resume cleaning value to: "1"
dreamehome.0
	2025-02-22 12:11:32.836	info	Get and update Task status value to: "0"
dreamehome.0
	2025-02-22 12:11:32.758	info	Get and update Water tank value to: "1"
dreamehome.0
	2025-02-22 12:11:32.680	info	Get and update Water volume value to: "1"
dreamehome.0
	2025-02-22 12:11:32.602	info	Get and update Suction level value to: "1"
dreamehome.0
	2025-02-22 12:11:32.523	info	Get and update Cleaned area value to: "3"
dreamehome.0
	2025-02-22 12:11:32.447	info	Get and update Cleaning time value to: "4"
dreamehome.0
	2025-02-22 12:11:32.370	info	Get and update Status value to: "14"
dreamehome.0
	2025-02-22 12:11:32.294	info	Get and update Charging status value to: "1"
dreamehome.0
	2025-02-22 12:11:32.219	info	Get and update Battery level value to: "100"
dreamehome.0
	2025-02-22 12:11:32.140	info	Get and update Error value to: "0"
dreamehome.0
	2025-02-22 12:11:32.057	info	Get and update State value to: "8"
dreamehome.0
	2025-02-22 12:11:31.964	info	Fetching obj_name: ali_dreame/FN759768/760380477/9
dreamehome.0
	2025-02-22 12:11:31.455	info	Log status is set to false
dreamehome.0
	2025-02-22 12:11:31.359	info	Login and request Dreame data from cloud
dreamehome.0
	2025-02-22 12:11:31.348	info	starting. Version 0.0.6 (non-npm: spayrosam/ioBroker.dreamehome#1946f996a6b46bbe4106fb90a2b09806e714041e) in /opt/iobroker/node_modules/iobroker.dreamehome, node: v20.18.2, js-controller: 7.0.6
host.raspyDocker
	2025-02-22 12:11:30.469	info	instance system.adapter.dreamehome.0 in version "0.0.6" (non-npm: spayrosam/ioBroker.dreamehome#1946f996a6b46bbe4106fb90a2b09806e714041e) started with pid 1067
host.raspyDocker
	2025-02-22 12:11:19.840	info	instance system.adapter.weatherunderground.0 having pid 1016 terminated with code 0 (NO_ERROR)
weatherunderground.0
	2025-02-22 12:11:19.327	info	Terminated (NO_ERROR): Without reason
host.raspyDocker
	2025-02-22 12:11:00.257	info	Restart adapter system.adapter.dreamehome.0 because enabled

Canvas ist installiert:

root@raspyDocker:/opt/iobroker# npm list canvas
iobroker.inst@3.0.0 /opt/iobroker
└── canvas@3.1.0

System Info:

======================= SUMMARY =======================
                        v.2025-02-02


Model           : Raspberry Pi 5 Model B Rev 1.0
Kernel          : aarch64
Userland        : arm64
Docker          : v10.0.0

Installation:           Docker
Kernel:                 aarch64
Userland:               64 bit
Timezone:               CET +0100
User-ID:                0
Display-Server:         false


Pending OS-Updates:     4
Pending iob updates:    0

Nodejs-Installation:
/usr/bin/nodejs         v20.18.2
/usr/bin/node           v20.18.2
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.4

Recommended versions are nodejs 20.18.3 and npm 10.8.2
nodeJS installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            8.5G        4.4G        887M        612M        4.1G        4.0G
Swap:           209M        209M        475K
Total:          8.7G        4.6G        888M

Active iob-Instances:   15
Upgrade policy: none

ioBroker Core:          js-controller           7.0.6
                        admin                   7.4.10

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspyDocker                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.web.0                    : web                   : raspyDocker                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                23886
States:                 10438

Size of iob-Database:

29M     /opt/iobroker/iobroker-data/objects.jsonl
9.8M    /opt/iobroker/iobroker-data/states.jsonl


Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained.

=================== END OF SUMMARY ====================

Alexander Grebe

@alexander-grebe

Habe dazu jetzt auch ein Issue in github eröffnet: https://github.com/spayrosam/ioBroker.dreamehome/issues/5

Max_yeah

Hallo zusammen,
ich benutze den adapter (version 0.2.0) schon eine weile mit meinem L10 pro Ultra Heat. Ich nutze aktuell nur die option ihn von meinem NSPanel aus starten zu können. Ich will bald auch noch die Restwerte auslesen und in meinem NSPanel anzeigen lassen.

Aktuell habe ich zwei anfragen:
zum einen bekomme ich sehr oft folgende Fehlermeldung:

dreame.0 2025-03-20 19:28:20.876	warn	State value to set for "dreame.0.760736103.status.fault" has value "122" greater than max "100"

Ist das bekannt? Kann ich den wert einfach ändern? Traue mich nicht einfach was zu setzten, nicht das der Robbi dann nicht mehr geht.

Und gibt es eine Möglichkeit, mit der ich die Benachrichtigungen, die in der App angezeigt werden, zb das Wasser leer ist oder das Reinigungsmittel, auch ausgelesen kann?

Danke
Gruß Max

Max_yeah

ich habe gerade gesehen das es eine version 0.2.2 gibt. Nach installation dieser über Github habe ich aber auch gleich wieder diesen Fehler bekommen.

newbie2007

Hallo,

wenn mein Dreame x40 im Reinigungsprozess ist, dann ist die CPU-Last auf dem ioBroker so hoch, dass andere Aktionen darüber kaum mehr möglich ist.
Kann das irgendwie verhindert werden? Liegt definitiv am Dreame-Adapter.

VG
Uwe

tombox

@newbie2007 get map deaktivieren?

mcBirne

Kann man Benachrichtigungen wie "Waschbrett und Mopps reinigen" irgendwo finden um sie sich per Telegram zu senden?

newbie2007

@tombox das war‘s.
Danke für den Tipp.

newbie2007

@mcbirne und auch die Datenpunkte für Frischwasser und Abwasser wären gut. Habe die leider auch noch nicht gefunden.

VG
Uwe

Nachtfuchs

Hallo in die Runde,

erstmal DANKE für das Engagement mit dem Adapter. Ich habe ihn wie am Anfang des Posts beschrieben über github installiert, erhalte allerdings folgende Fehlermeldung (der Status im ioBroker ist mir neu).

Die login-Daten (User ID und Passwort) sind definitv richtig, mit diesen Daten habe ich Zugriff in der App.

Wir haben einen Dreame l10s und einen H14Pro

Hat jemand eine Idee?

Dank euch

Thomas Braun

@nachtfuchs sagte in Test Dreame Home Adapter:

erhalte allerdings folgende Fehlermeldung (der Status im ioBroker ist mir neu).

Welche? Schau im

iob logs --watch

nach einer Fehlermeldung.

DarkDevil

@wawyo

Ich habe gerade die Karte an meinem L50 Ultra erfolgreich in Betrieb genommen, vielen Dank für den Adapter.

Nur lässt sich auch das Menü ( Haupt/Seitenbürste etc) deaktivieren, so dass nur die Karte übrig bleibt?

Housemeister 0

@nachtfuchs said in Test Dreame Home Adapter:

Hallo in die Runde,

erstmal DANKE für das Engagement mit dem Adapter. Ich habe ihn wie am Anfang des Posts beschrieben über github installiert, erhalte allerdings folgende Fehlermeldung (der Status im ioBroker ist mir neu).

Die login-Daten (User ID und Passwort) sind definitv richtig, mit diesen Daten habe ich Zugriff in der App.

Wir haben einen Dreame l10s und einen H14Pro

Hat jemand eine Idee?

Dank euch

Hi ich habe aktuell nach einer Neuinstallation, das gleiche Problem. Hab sogar nochmal das Passwort aktualisiert. Bekomme aber keine Verbindung zur Instanz.

Log zeigt folgendes:

2025-10-08 19:26:10.702  - info: host.smarthome Restart adapter system.adapter.dreamehome.0 because enabled
2025-10-08 19:26:41.099  - info: host.smarthome instance system.adapter.dreamehome.0 in version "1.0.0" (non-npm: spayrosam/ioBroker.dreamehome#7893b33ffe944c9e017b2f64a3667fd98da6ddf1) started with pid 687429
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]: node:internal/modules/cjs/loader:1865
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:   return process.dlopen(module, path.toNamespacedPath(filename));
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:                  ^
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]: Error: libcairo.so.2: ELF load command address/offset not page-aligned
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at Object..node (node:internal/modules/cjs/loader:1865:18)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at Module.load (node:internal/modules/cjs/loader:1441:32)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at Function._load (node:internal/modules/cjs/loader:1263:12)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at TracingChannel.traceSync (node:diagnostics_channel:322:14)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at wrapModuleLoad (node:internal/modules/cjs/loader:237:24)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at Module.require (node:internal/modules/cjs/loader:1463:12)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at require (node:internal/modules/helpers:147:16)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at Object.<anonymous> (/opt/iobroker/node_modules/canvas/lib/bindings.js:3:18)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at Module._compile (node:internal/modules/cjs/loader:1706:14)
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:     at Object..js (node:internal/modules/cjs/loader:1839:10) {
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]:   code: 'ERR_DLOPEN_FAILED'
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]: }
2025-10-08 19:26:41.546  - error: host.smarthome Caught by controller[0]: Node.js v22.20.0
2025-10-08 19:26:41.547  - error: host.smarthome instance system.adapter.dreamehome.0 terminated with code 1 (JS_CONTROLLER_STOPPED)

auch nach dem Update auf die Version 1.0 bleibt der Fehler bestehen.

Thomas Braun

@housemeister-0

Ist das ein reines 64Bit-System?
Gib mal die Ausgabe von

iob diag

bekannt.

Housemeister 0

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: smarthome
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 20:09:10 up 13 days, 21:08,  2 users,  load average: 1.58, 0.76, 0.43
CPU threads: 4


*** LIFE CYCLE STATUS ***
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-10-08 20:09:11 CEST
           Universal time: Wed 2025-10-08 18:09:11 UTC
                 RTC time: Wed 2025-10-08 18:09:11
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
kai
HOME=/home/kai
GROUPS=kai adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             17G        5.2G        9.5G        160M        2.6G         11G
Swap:           536M          0B        536M
Total:           17G        5.2G         10G

Active iob-Instances:   36

        16219 M total memory
         4958 M used memory
         4875 M active memory
         1687 M inactive memory
         9094 M free memory
          156 M buffer memory
         2282 M swap cache
          511 M total swap
            0 M used swap
          511 M free swap

*** top - Table Of Processes  ***
top - 20:09:11 up 13 days, 21:08,  2 users,  load average: 1.58, 0.76, 0.43
Tasks: 240 total,   1 running, 239 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni, 50.0 id, 50.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :  16219.1 total,   9094.5 free,   4958.9 used,   2439.0 buff/cache
MiB Swap:    512.0 total,    512.0 free,      0.0 used.  11260.2 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  7.9G     0  7.9G   0% /dev
tmpfs          tmpfs     1.6G  153M  1.5G  10% /run
/dev/mmcblk0p2 ext4      115G  8.6G  100G   8% /
tmpfs          tmpfs     8.0G     0  8.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   57M  454M  12% /boot/firmware
tmpfs          tmpfs     1.6G     0  1.6G   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Sep 24 23:00:56 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=88:A2:9E:27:16:68 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=e11f02e0-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Wed Sep 24 23:00:59 2025] EXT4-fs (mmcblk0p2): mounted filesystem d4cc7d63-da78-48ad-9bdd-64ffbba449a8 ro with ordered data mode. Quota mode: none.
[Wed Sep 24 23:01:00 2025] EXT4-fs (mmcblk0p2): re-mounted d4cc7d63-da78-48ad-9bdd-64ffbba449a8 r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.7G    /var/
751M    /var/cache
737M    /var/cache/apt
621M    /var/cache/apt/archives
425M    /var/lib

Archived and active journals take up 147.6M in the file system.

/opt/iobroker/backups:
165M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
512M    /opt/iobroker/iobroker-data/
360M    /opt/iobroker/iobroker-data/files
116M    /opt/iobroker/iobroker-data/backup-objects
89M     /opt/iobroker/iobroker-data/files/vis-2
47M     /opt/iobroker/iobroker-data/files/vis-2/widgets

The five largest files in iobroker-data are:
26M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.c9369f6c.js.map
17M     /opt/iobroker/iobroker-data/files/vis-2.0/Smartpad V1.0/Background/schwarzer-hintergrund-mit-stoffstruktur.jpg
9.8M    /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json
8.8M    /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CjzUbllv.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230803151340-if00

*** ZigBee Settings ***

Your zigbee.0 COM-Port is matching 'by-id'. Very good!
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.20.0
/usr/bin/node           v22.20.0
/usr/bin/npm            10.9.3
/usr/bin/npx            10.9.3
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.20.0-1nodesource1
  Candidate: 22.20.0-1nodesource1
  Version table:
 *** 22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     18.20.4+dfsg-1~deb12u1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
smarthome           smarthome (version: 7.0.7, hostname: smarthome     , alive, uptime: 1199296)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.2
javascript:     9.0.11

nodejs modules from github:     3
+-- iobroker.dreame@0.2.2 (git+ssh://git@github.com/TA2k/ioBroker.dreame.git#a0e1b46849b68d02cafe1bdf3504193195e927f8)
+-- iobroker.dreamehome@1.0.0 (git+ssh://git@github.com/spayrosam/ioBroker.dreamehome.git#7893b33ffe944c9e017b2f64a3667fd98da6ddf1)
+-- iobroker.ws@3.0.19 (git+ssh://git@github.com/ioBroker/ioBroker.ws.git#835702659099b5d0991289a5377d8f2bff4b89ac)

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : smarthome                                -  enabled
+ system.adapter.backitup.0               : backitup              : smarthome                                -  enabled
+ system.adapter.bring.0                  : bring                 : smarthome                                -  enabled
+ system.adapter.cloud.0                  : cloud                 : smarthome                                -  enabled
  system.adapter.daswetter.0              : daswetter             : smarthome                                -  enabled
+ system.adapter.discovery.0              : discovery             : smarthome                                -  enabled
  system.adapter.dreame.0                 : dreame                : smarthome                                - disabled
  system.adapter.dreamehome.0             : dreamehome            : smarthome                                - disabled
  system.adapter.dwd.0                    : dwd                   : smarthome                                -  enabled
+ system.adapter.e3dc-rscp.0              : e3dc-rscp             : smarthome                                -  enabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: smarthome                                -  enabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : smarthome                                -  enabled
  system.adapter.flot.0                   : flot                  : smarthome                                - disabled
+ system.adapter.fullybrowser.0           : fullybrowser          : smarthome                                -  enabled
+ system.adapter.geofency.0               : geofency              : smarthome                                -  enabled, port: 7999, bind: 0.0.0.0
+ system.adapter.history.0                : history               : smarthome                                -  enabled
+ system.adapter.hmip.0                   : hmip                  : smarthome                                -  enabled
+ system.adapter.hue.0                    : hue                   : smarthome                                -  enabled, port: 443
  system.adapter.ical.1                   : ical                  : smarthome                                -  enabled
  system.adapter.ical.2                   : ical                  : smarthome                                -  enabled
  system.adapter.ical.3                   : ical                  : smarthome                                -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : smarthome                                - disabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : smarthome                                - disabled
+ system.adapter.influxdb.0               : influxdb              : smarthome                                -  enabled, port: 8086
+ system.adapter.iot.0                    : iot                   : smarthome                                -  enabled
+ system.adapter.javascript.0             : javascript            : smarthome                                -  enabled
+ system.adapter.matter.0                 : matter                : smarthome                                -  enabled
+ system.adapter.meross.0                 : meross                : smarthome                                -  enabled
+ system.adapter.ring.0                   : ring                  : smarthome                                -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : smarthome                                -  enabled
+ system.adapter.rssfeed.0                : rssfeed               : smarthome                                -  enabled
+ system.adapter.scenes.0                 : scenes                : smarthome                                -  enabled
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : smarthome                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tesla-motors.0           : tesla-motors          : smarthome                                -  enabled
+ system.adapter.tibberlink.0             : tibberlink            : smarthome                                -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : smarthome                                -  enabled
+ system.adapter.tuya.0                   : tuya                  : smarthome                                -  enabled
  system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: smarthome                                - disabled
  system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: smarthome                                - disabled
  system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: smarthome                                - disabled
  system.adapter.vis-2-widgets-rssfeed.0  : vis-2-widgets-rssfeed : smarthome                                - disabled
+ system.adapter.vis-2.0                  : vis-2                 : smarthome                                -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : smarthome                                - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : smarthome                                - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : smarthome                                -  enabled
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : smarthome                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthome                                -  enabled, port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230803151340-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.geofency.0               : geofency              : smarthome                                -  enabled, port: 7999, bind: 0.0.0.0
+ system.adapter.hue.0                    : hue                   : smarthome                                -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : smarthome                                -  enabled, port: 8086
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : smarthome                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : smarthome                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthome                                -  enabled, port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230803151340-if00

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.2    , installed 7.7.2
Adapter    "alexa2"       : 3.27.3   , installed 3.27.3
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "bring"        : 1.8.4    , installed 1.9.1
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "daswetter"    : 3.2.3    , installed 3.2.3
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "e3dc-rscp"    : 1.4.3    , installed 1.4.2  [Updatable]
Adapter    "energiefluss-erweitert": 0.7.7, installed 0.7.8
Adapter    "fb-checkpresence": 1.4.0 , installed 1.4.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fullybrowser" : 3.1.2    , installed 3.1.2
Adapter    "geofency"     : 1.2.4    , installed 1.2.4
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hmip"         : 1.27.0   , installed 1.27.0
Adapter    "hue"          : 3.16.2   , installed 3.16.2
Adapter    "ical"         : 1.17.0   , installed 1.17.0
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.3.0    , installed 3.6.0
Adapter    "javascript"   : 8.9.2    , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "matter"       : 0.5.2    , installed 0.5.2
Adapter    "meross"       : 1.17.0   , installed 1.17.0
Adapter    "ring"         : 6.4.0    , installed 6.4.0
Adapter    "rpi2"         : 2.4.0    , installed 2.4.0
Adapter    "rssfeed"      : 3.6.1    , installed 3.5.2  [Updatable]
Adapter    "scenes"       : 3.2.3    , installed 3.2.3
Adapter    "shelly"       : 10.2.0   , installed 10.2.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "tesla-motors" : 1.3.2    , installed 1.4.5
Adapter    "tibberlink"   : 5.0.2    , installed 5.0.2
Adapter    "trashschedule": 3.3.0    , installed 4.0.1
Adapter    "tuya"         : 3.16.0   , installed 3.17.0
Adapter    "vis-2"        : 2.13.4   , installed 2.13.4
Adapter    "vis-2-widgets-inventwo": 0.2.2, installed 0.3.5
Adapter    "vis-2-widgets-jaeger-design": 1.2.7, installed 1.4.7
Adapter    "vis-2-widgets-material": 1.4.10, installed 1.4.10
Adapter    "vis-2-widgets-rssfeed": 1.2.2, installed 1.2.2
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.18.0   , installed 1.18.0
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "web"          : 7.0.8    , installed 7.0.9
Adapter    "ws"           : 2.6.2    , installed 3.0.19
Adapter    "zigbee"       : 3.0.5    , installed 3.0.5

Objects and States
Please stand by - This may take a while
Objects:        15266
States:         12774

*** OS-Repositories and Updates ***
W: GPG error: https://repos.influxdata.com/debian bookworm InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
E: The repository 'https://repos.influxdata.com/debian bookworm InRelease' is not signed.
Pending Updates: 27

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      107        5742       684/influxd
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       3020       685/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       3025       685/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          666        701/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       1157267    97123/io.sonoff.0
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       6895       1265/io.shelly.0
tcp6       0      0 :::7070                 :::*                    LISTEN      106        6329       805/evcc
tcp6       0      0 :::7999                 :::*                    LISTEN      1001       8280       1115/io.geofency.0
tcp6       0      0 :::8086                 :::*                    LISTEN      107        5749       684/influxd
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       10282      1580/io.ws.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       7884       1565/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       823        816/io.admin.0
tcp6       0      0 :::3000                 :::*                    LISTEN      105        1170476    98315/grafana
tcp6       0      0 :::22                   :::*                    LISTEN      0          668        701/sshd: /usr/sbin
udp        0      0 0.0.0.0:52970           0.0.0.0:*                           104        1992       571/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       7752803    318516/io.matter.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       3391016    318516/io.matter.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       3391001    318516/io.matter.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       3390993    318516/io.matter.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           106        780        805/evcc
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        1990       571/avahi-daemon: r
udp        0      0 0.0.0.0:5540            0.0.0.0:*                           1001       3391010    318516/io.matter.0
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       6920       1295/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       6921       1295/io.tuya.0
udp        0      0 0.0.0.0:39468           0.0.0.0:*                           1001       3392574    318516/io.matter.0
udp6       0      0 fe80::9b90:5c0c:88d:546 :::*                                0          903071     656/NetworkManager
udp6       0      0 fe80::1bb1:e9f4:8cf:546 :::*                                0          770        656/NetworkManager
udp6       0      0 :::5353                 :::*                                1001       7752804    318516/io.matter.0
udp6       0      0 :::5353                 :::*                                1001       3391017    318516/io.matter.0
udp6       0      0 :::5353                 :::*                                1001       3391004    318516/io.matter.0
udp6       0      0 :::5353                 :::*                                1001       3390996    318516/io.matter.0
udp6       0      0 :::5353                 :::*                                106        781        805/evcc
udp6       0      0 :::5353                 :::*                                104        1991       571/avahi-daemon: r
udp6       0      0 :::5540                 :::*                                1001       3391009    318516/io.matter.0
udp6       0      0 :::39120                :::*                                104        1993       571/avahi-daemon: r
udp6       0      0 :::39468                :::*                                1001       3392573    318516/io.matter.0

*** Log File - Last 25 Lines ***

2025-10-08 20:00:06.531  - info: ical.2 (688853) processing URL: Kai https://calendar.google.com/calendar/ical/reeflover82%40gmail.com/private-47d92a1cdbeae54baf7a78aa1cdf3bf3/basic.ics
2025-10-08 20:00:06.774  - info: ical.3 (688815) Terminated (NO_ERROR): Without reason
2025-10-08 20:00:07.294  - info: host.smarthome instance system.adapter.ical.3 having pid 688815 terminated with code 0 (NO_ERROR)
2025-10-08 20:00:10.012  - info: host.smarthome instance system.adapter.daswetter.0 in version "3.2.3" started with pid 688870
2025-10-08 20:00:11.698  - info: daswetter.0 (688870) starting. Version 3.2.3 in /opt/iobroker/node_modules/iobroker.daswetter, node: v22.20.0, js-controller: 7.0.7
2025-10-08 20:00:11.783  - info: ical.2 (688853) Terminated (NO_ERROR): Without reason
2025-10-08 20:00:12.330  - info: host.smarthome instance system.adapter.ical.2 having pid 688853 terminated with code 0 (NO_ERROR)
2025-10-08 20:00:20.426  - info: daswetter.0 (688870) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2025-10-08 20:00:20.931  - info: daswetter.0 (688870) cleaned everything up...
2025-10-08 20:00:20.941  - info: host.smarthome instance system.adapter.daswetter.0 having pid 688870 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-10-08 20:00:23.010  - info: host.smarthome instance system.adapter.dwd.0 in version "2.8.5" started with pid 688885
2025-10-08 20:00:23.947  - info: dwd.0 (688885) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v22.20.0, js-controller: 7.0.7
2025-10-08 20:00:24.318  - info: dwd.0 (688885) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-10-08 20:00:24.831  - info: host.smarthome instance system.adapter.dwd.0 having pid 688885 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-10-08 20:03:06.185  - info: web.0 (1565) <== Disconnect system.user.admin from ::ffff:192.168.178.180 vis-2
2025-10-08 20:03:07.549  - info: web.0 (1565) ==> Connected system.user.admin from ::ffff:192.168.178.180
2025-10-08 20:03:09.713  - info: vis-2.0 (1535) vis-2 license is OK.
2025-10-08 20:04:54.175  - warn: e3dc-rscp.0 (1387) Received data type ERROR: RSCP_ERR_NOT_AVAILABLE (6) - tag TAG_EMS_EMERGENCY_POWER_TEST_STATUS (0x1800093)
2025-10-08 20:05:23.014  - info: host.smarthome instance system.adapter.dwd.0 in version "2.8.5" started with pid 689034
2025-10-08 20:05:23.964  - info: dwd.0 (689034) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v22.20.0, js-controller: 7.0.7
2025-10-08 20:05:24.312  - info: dwd.0 (689034) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-10-08 20:05:24.831  - info: host.smarthome instance system.adapter.dwd.0 having pid 689034 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-10-08 20:08:19.638  - info: web.0 (1565) <== Disconnect system.user.admin from ::ffff:192.168.178.180 vis-2
2025-10-08 20:08:21.029  - info: web.0 (1565) ==> Connected system.user.admin from ::ffff:192.168.178.180
2025-10-08 20:08:23.126  - info: vis-2.0 (1535) vis-2 license is OK.

Thomas Braun

@housemeister-0

Soweit passt das eigentlich.
Leg das Influxdb-Repo nochmal neu an:

https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind

Und dann die updates einspielen. Sowohl für das Betriebssystem wie auch für den ioBroker.
Perspektivisch auch da in diesem Winter RaspberryOS 13 installieren.

Housemeister 0

@thomas-braun danke für die Tipps, habe Influxdb nochmal neu installiert und danach alle updates gezogen, leider keine Verbessserung

Thomas Braun

@housemeister-0

Du musst wohl libcairo aktualisieren.
Da würde ich aber wie gesagt dann gleich die große Lösung (Update auf RaspberryOS 13) wählen.

Housemeister 0

@thomas-braun said in Test Dreame Home Adapter:

Update auf RaspberryOS 13

Mist hätt ich gewusst das Trixie im Oktober kommt, hätte ich noch ein paar Tage mit dem Wechsel auf den Pi5 gewartet. Hab das System erst im September neu aufgesetzt.

Thomas Braun

@housemeister-0

Dann dürfte ein inline-Upgrade ja kein großes Ding sein.

https://forum.iobroker.net/topic/81187/upgrade-von-debian-12-bookworm-auf-debian-13-trixie

Community Forum

NEWS

Test Dreame Home Adapter

Support us

802

32.4k

81.4k

1.3m