Test Dreame Home Adapter
-
@baddik Nimm mal ein String Img Scr. Kann sein, dass du die Ansicht spiegeln musst. Das geht dann unter "CSS Allgemein" --> "Transform" mit scaleY(-1). Ist zumindest bei mir so.
-
@heinz2100 Danke für die Antwort. Ich verstehe aber leider nur Bahnhof
Kannst Du das bitte für einen Laien ein bisschen genauer ausführen? Danke. -
@baddik Nimm in der WIS ein Widget mit dem Namen "String img scr" und nimm hier die Objekt ID dreame.0.XXXXXXXXX.map.maps.XX.image
Je nachdem wie es bei dir heißt. Falls die Karte gespiegelt angezeigt wird, kannst du bei den Widget-Eigenschaften unter "CSS allgemein" unter "transform" den Wert scaleY(-1) oder scaleX(-1) einegen. Dann wird es gespiegelt.
-
@heinz2100 Danke. Ich habe festgestellt, dass wir wohl aneinander vorbei geredet haben.
Den von Dir erwähnten Datenpunkt habe ich nur im "dreame"-Adapter gefunden. Ich habe aber "dreamehome" installiert und da kann ich diesen DP nicht finden. Das macht doch einiges klarer...
Jetzt habe ich übrigens die Karte, wenn ich mit dem "dreame" Adapter arbeite
-
Hallo Community,
ich habe einen Dreame L10s Ultra im Einsatz, den ich versuche im ioBroker zum Laufen zu bringen. Zunächst habe ich das mit dem Dreame Adapter versucht (was so "halb" ging) und jetzt habe ich den Dreamhome Dapter über die Katze von github installiert.
Beim ersten Starten des Adapters ging der auch auf "grün". Allerdings haben da noch die Maps gefehlt. Ich habe darauf (wie in der Anleitung beschrieben) dreamehome.0.xxxxxxxx.map.NewMap auf true gesetzt. Seitdem startet der Adapter nicht mehr richtig mit folgenden Fehler-Meldungen:host.raspyDocker 2025-02-22 12:11:40.055 info Restart adapter system.adapter.dreamehome.0 because enabled host.raspyDocker 2025-02-22 12:11:40.055 error instance system.adapter.dreamehome.0 terminated with code 6 (UNCAUGHT_EXCEPTION) dreamehome.0 2025-02-22 12:11:39.820 info Connection to MQTT successfully established dreamehome.0 2025-02-22 12:11:39.507 warn Terminated (UNCAUGHT_EXCEPTION): Without reason dreamehome.0 2025-02-22 12:11:39.506 info terminating dreamehome.0 2025-02-22 12:11:39.506 info cleaned everything up... dreamehome.0 2025-02-22 12:11:39.504 error Cannot read properties of undefined (reading 'storeys') dreamehome.0 2025-02-22 12:11:39.504 error TypeError: Cannot read properties of undefined (reading 'storeys') at Dreamehome.DH_GetSetRooms (/opt/iobroker/node_modules/iobroker.dreamehome/main.js:1805:54) at Dreamehome.onReady (/opt/iobroker/node_modules/iobroker.dreamehome/main.js:1428:15) dreamehome.0 2025-02-22 12:11:39.503 error unhandled promise rejection: Cannot read properties of undefined (reading 'storeys') dreamehome.0 2025-02-22 12:11:39.503 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). dreamehome.0 2025-02-22 12:11:39.424 info Die aktuell eingestellte Standard-Kartennummer ist eingestellt auf 0 dreamehome.0 2025-02-22 12:11:39.376 info Set and update Volume value to: 21 dreamehome.0 2025-02-22 12:11:39.327 info Set and update Live Video Prompts value to: 0 dreamehome.0 2025-02-22 12:11:39.278 info Set and update Clean Route value to: 0 dreamehome.0 2025-02-22 12:11:39.230 info Set and update Collision-Avoidance Mode value to: 0 dreamehome.0 2025-02-22 12:11:39.182 info Set and update Fill Light value to: 0 dreamehome.0 2025-02-22 12:11:39.134 info Set and update Intensive Cleaning for Furniture Legs value to: 0 dreamehome.0 2025-02-22 12:11:39.087 info Set and update Mop Extension for Gap cleaning value to: 0 dreamehome.0 2025-02-22 12:11:39.039 info Set and update AI driven MopExtend value to: 0 dreamehome.0 2025-02-22 12:11:38.991 info Set and update Intensive Carpet cleaning value to: 0 dreamehome.0 2025-02-22 12:11:38.943 info Set and update Carpet Boost value to: 0 dreamehome.0 2025-02-22 12:11:38.895 info Set and update Auto recleaning value to: 0 dreamehome.0 2025-02-22 12:11:38.847 info Set and update Auto Rewashing value to: 0 dreamehome.0 2025-02-22 12:11:38.795 info Set and update Clean Genius value to: 0 dreamehome.0 2025-02-22 12:11:38.746 info Set and update Auto mount mop value to: 0 dreamehome.0 2025-02-22 12:11:38.741 info Set and update Auto add detergent value to: null dreamehome.0 2025-02-22 12:11:38.736 info Set and update Child lock value to: 0 dreamehome.0 2025-02-22 12:11:38.731 info Set and update Resume Cleane Mode value to: 1 dreamehome.0 2025-02-22 12:11:38.682 info Die Karte wurde erfolgreich aus der Cloud heruntergeladen dreamehome.0 2025-02-22 12:11:38.675 info Die aktuell eingestellte Standard-Kartennummer ist eingestellt auf 0 dreamehome.0 2025-02-22 12:11:38.171 info Get and update Camera light value to: "0" dreamehome.0 2025-02-22 12:11:37.933 info Get and update Stream status value to: "{\"operType\":\"end\",\"operation\":\"monitor\",\"result\":0,\"status\":0}" dreamehome.0 2025-02-22 12:11:37.730 info Get and update Detergent time left value to: "18" dreamehome.0 2025-02-22 12:11:37.695 info Get and update Detergent left value to: "100" dreamehome.0 2025-02-22 12:11:37.557 info Get and update Mop pad time left value to: "0" dreamehome.0 2025-02-22 12:11:37.482 info Get and update Mop pad left value to: "0" dreamehome.0 2025-02-22 12:11:37.405 info Get and update Sensor dirty time left value to: "24" dreamehome.0 2025-02-22 12:11:37.329 info Get and update Sensor dirty left value to: "80" dreamehome.0 2025-02-22 12:11:37.253 info Get and update Auto empty status value to: "0" dreamehome.0 2025-02-22 12:11:37.220 info Get and update Dust collection value to: "1" dreamehome.0 2025-02-22 12:11:36.874 info Get and update Filter time left value to: "38" dreamehome.0 2025-02-22 12:11:36.798 info Get and update Filter left value to: "25" dreamehome.0 2025-02-22 12:11:36.722 info Get and update Side brush left value to: "44" dreamehome.0 2025-02-22 12:11:36.645 info Get and update Side brush time left value to: "88" dreamehome.0 2025-02-22 12:11:36.570 info Get and update Main brush left value to: "62" dreamehome.0 2025-02-22 12:11:36.537 info Get and update Main brush time left value to: "188" dreamehome.0 2025-02-22 12:11:36.472 info Get and update Schedule cancel reason value to: "0" dreamehome.0 2025-02-22 12:11:36.366 info Get and update Schedule value to: "2-1-08:25-0100000-1-0-0-0-0;1-3-08:50-0010100-1-6-0-0-78081,78082;4-3-11:00-0000000-0-6-0-0-2171137;6-0-11:04-0000000-0-34-0-0-78082,78081;5-0-12:01-0000000-0-6-0-0-78083,78081;3-3-12:17-0000000-0-6-0-0-78081,78082,78083;9-0-12:40-0000000-0-34-0-0-78081,78082;10-0-13:34-0000000-0-34-0-0-78082,78081;7-0-14:21-0000000-0-34-0-0-2175233;8-0-14:35-0000000-0-34-0-0-78082" dreamehome.0 2025-02-22 12:11:36.331 info Get and update Timezone value to: "Europe/Berlin" dreamehome.0 2025-02-22 12:11:36.203 info Get and update Volume value to: "21" dreamehome.0 2025-02-22 12:11:35.929 info Get and update Map list value to: "{\"obj_name\":\"ali_dreame/FN759768/760380477/9\",\"md5\":\"9c3a8b002314dada5808154865eec5de\"}" dreamehome.0 2025-02-22 12:11:35.892 info Get and update Multi floor map value to: "1" dreamehome.0 2025-02-22 12:11:35.767 info Get and update Object name value to: "ali_dreame/FN759768/760380477/0" dreamehome.0 2025-02-22 12:11:35.367 info Get and update Mop pad installed value to: "0" dreamehome.0 2025-02-22 12:11:35.289 info Get and update Mop in station value to: "0" dreamehome.0 2025-02-22 12:11:35.254 info Get and update Auto water refilling value to: "0" dreamehome.0 2025-02-22 12:11:35.139 info Get and update Intelligent recognition value to: "0" dreamehome.0 2025-02-22 12:11:35.060 info Get and update Quick command value to: "[]" dreamehome.0 2025-02-22 12:11:34.979 info Get and update Scheduled clean value to: "0" dreamehome.0 2025-02-22 12:11:34.899 info Get and update Mop wash level value to: "1" dreamehome.0 2025-02-22 12:11:34.819 info Get and update Auto mount mop value to: "0" dreamehome.0 2025-02-22 12:11:34.743 info Get and update Low water warning value to: "0" dreamehome.0 2025-02-22 12:11:34.667 info Get and update Drying time value to: "2" dreamehome.0 2025-02-22 12:11:34.634 info Get and update Save water tips value to: "0" dreamehome.0 2025-02-22 12:11:34.556 info Get and update Capability value to: "1" dreamehome.0 2025-02-22 12:11:34.478 info Get and update Auto add detergent value to: "2" dreamehome.0 2025-02-22 12:11:34.402 info Get and update Carpet avoidance value to: "2" dreamehome.0 2025-02-22 12:11:34.327 info Get and update Warn status value to: "101" dreamehome.0 2025-02-22 12:11:34.250 info Get and update Self clean value to: "1" dreamehome.0 2025-02-22 12:11:34.216 info Get and update Carpet recognition value to: "1" dreamehome.0 2025-02-22 12:11:34.111 info Get and update Y clean value to: "0" dreamehome.0 2025-02-22 12:11:34.035 info Get and update Cleaning cancel value to: "1" dreamehome.0 2025-02-22 12:11:33.959 info Get and update Tight mopping value to: "0" dreamehome.0 2025-02-22 12:11:33.881 info Get and update Carpet sensitivity value to: "2" dreamehome.0 2025-02-22 12:11:33.807 info Get and update Child lock value to: "0" dreamehome.0 2025-02-22 12:11:33.730 info Get and update Customized cleaning value to: "0" dreamehome.0 2025-02-22 12:11:33.654 info Get and update Self wash base status value to: "2" dreamehome.0 2025-02-22 12:11:33.578 info Get and update Upload map value to: "1" dreamehome.0 2025-02-22 12:11:33.499 info Get and update Cleaning mode value to: "70656" dreamehome.0 2025-02-22 12:11:33.465 info Get and update Ai detection value to: "7" dreamehome.0 2025-02-22 12:11:33.401 info Get and update Relocation status value to: "0" dreamehome.0 2025-02-22 12:11:33.294 info Get and update Faults value to: "0" dreamehome.0 2025-02-22 12:11:33.260 info Get and update Cleaning paused value to: "0" dreamehome.0 2025-02-22 12:11:33.055 info Get and update Carpet boost value to: "1" dreamehome.0 2025-02-22 12:11:33.018 info Get and update Resume cleaning value to: "1" dreamehome.0 2025-02-22 12:11:32.836 info Get and update Task status value to: "0" dreamehome.0 2025-02-22 12:11:32.758 info Get and update Water tank value to: "1" dreamehome.0 2025-02-22 12:11:32.680 info Get and update Water volume value to: "1" dreamehome.0 2025-02-22 12:11:32.602 info Get and update Suction level value to: "1" dreamehome.0 2025-02-22 12:11:32.523 info Get and update Cleaned area value to: "3" dreamehome.0 2025-02-22 12:11:32.447 info Get and update Cleaning time value to: "4" dreamehome.0 2025-02-22 12:11:32.370 info Get and update Status value to: "14" dreamehome.0 2025-02-22 12:11:32.294 info Get and update Charging status value to: "1" dreamehome.0 2025-02-22 12:11:32.219 info Get and update Battery level value to: "100" dreamehome.0 2025-02-22 12:11:32.140 info Get and update Error value to: "0" dreamehome.0 2025-02-22 12:11:32.057 info Get and update State value to: "8" dreamehome.0 2025-02-22 12:11:31.964 info Fetching obj_name: ali_dreame/FN759768/760380477/9 dreamehome.0 2025-02-22 12:11:31.455 info Log status is set to false dreamehome.0 2025-02-22 12:11:31.359 info Login and request Dreame data from cloud dreamehome.0 2025-02-22 12:11:31.348 info starting. Version 0.0.6 (non-npm: spayrosam/ioBroker.dreamehome#1946f996a6b46bbe4106fb90a2b09806e714041e) in /opt/iobroker/node_modules/iobroker.dreamehome, node: v20.18.2, js-controller: 7.0.6 host.raspyDocker 2025-02-22 12:11:30.469 info instance system.adapter.dreamehome.0 in version "0.0.6" (non-npm: spayrosam/ioBroker.dreamehome#1946f996a6b46bbe4106fb90a2b09806e714041e) started with pid 1067 host.raspyDocker 2025-02-22 12:11:19.840 info instance system.adapter.weatherunderground.0 having pid 1016 terminated with code 0 (NO_ERROR) weatherunderground.0 2025-02-22 12:11:19.327 info Terminated (NO_ERROR): Without reason host.raspyDocker 2025-02-22 12:11:00.257 info Restart adapter system.adapter.dreamehome.0 because enabledCanvas ist installiert:
root@raspyDocker:/opt/iobroker# npm list canvas iobroker.inst@3.0.0 /opt/iobroker └── canvas@3.1.0System Info:
======================= SUMMARY ======================= v.2025-02-02 Model : Raspberry Pi 5 Model B Rev 1.0 Kernel : aarch64 Userland : arm64 Docker : v10.0.0 Installation: Docker Kernel: aarch64 Userland: 64 bit Timezone: CET +0100 User-ID: 0 Display-Server: false Pending OS-Updates: 4 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.2 /usr/bin/node v20.18.2 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 Recommended versions are nodejs 20.18.3 and npm 10.8.2 nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 8.5G 4.4G 887M 612M 4.1G 4.0G Swap: 209M 209M 475K Total: 8.7G 4.6G 888M Active iob-Instances: 15 Upgrade policy: none ioBroker Core: js-controller 7.0.6 admin 7.4.10 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspyDocker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.web.0 : web : raspyDocker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 23886 States: 10438 Size of iob-Database: 29M /opt/iobroker/iobroker-data/objects.jsonl 9.8M /opt/iobroker/iobroker-data/states.jsonl Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained. =================== END OF SUMMARY ==================== -
Habe dazu jetzt auch ein Issue in github eröffnet:
https://github.com/spayrosam/ioBroker.dreamehome/issues/5 -
Hallo zusammen,
ich benutze den adapter (version 0.2.0) schon eine weile mit meinem L10 pro Ultra Heat. Ich nutze aktuell nur die option ihn von meinem NSPanel aus starten zu können. Ich will bald auch noch die Restwerte auslesen und in meinem NSPanel anzeigen lassen.Aktuell habe ich zwei anfragen:
zum einen bekomme ich sehr oft folgende Fehlermeldung:dreame.0 2025-03-20 19:28:20.876 warn State value to set for "dreame.0.760736103.status.fault" has value "122" greater than max "100"Ist das bekannt? Kann ich den wert einfach ändern? Traue mich nicht einfach was zu setzten, nicht das der Robbi dann nicht mehr geht.
Und gibt es eine Möglichkeit, mit der ich die Benachrichtigungen, die in der App angezeigt werden, zb das Wasser leer ist oder das Reinigungsmittel, auch ausgelesen kann?
Danke
Gruß Max -
ich habe gerade gesehen das es eine version 0.2.2 gibt. Nach installation dieser über Github habe ich aber auch gleich wieder diesen Fehler bekommen.
-
Hallo,
wenn mein Dreame x40 im Reinigungsprozess ist, dann ist die CPU-Last auf dem ioBroker so hoch, dass andere Aktionen darüber kaum mehr möglich ist.
Kann das irgendwie verhindert werden? Liegt definitiv am Dreame-Adapter.VG
Uwe -
@newbie2007 get map deaktivieren?
-
Kann man Benachrichtigungen wie "Waschbrett und Mopps reinigen" irgendwo finden um sie sich per Telegram zu senden?
-
@tombox das war‘s.
Danke für den Tipp. -
@mcbirne und auch die Datenpunkte für Frischwasser und Abwasser wären gut. Habe die leider auch noch nicht gefunden.
VG
Uwe -
Hallo in die Runde,
erstmal DANKE für das Engagement mit dem Adapter. Ich habe ihn wie am Anfang des Posts beschrieben über github installiert, erhalte allerdings folgende Fehlermeldung (der Status im ioBroker ist mir neu).
Die login-Daten (User ID und Passwort) sind definitv richtig, mit diesen Daten habe ich Zugriff in der App.
Wir haben einen Dreame l10s und einen H14Pro
Hat jemand eine Idee?
Dank euch
-
@nachtfuchs sagte in Test Dreame Home Adapter:
erhalte allerdings folgende Fehlermeldung (der Status im ioBroker ist mir neu).
Welche? Schau im
iob logs --watchnach einer Fehlermeldung.
-
Ich habe gerade die Karte an meinem L50 Ultra erfolgreich in Betrieb genommen, vielen Dank für den Adapter.
Nur lässt sich auch das Menü ( Haupt/Seitenbürste etc) deaktivieren, so dass nur die Karte übrig bleibt?
-
@nachtfuchs said in Test Dreame Home Adapter:
Hallo in die Runde,
erstmal DANKE für das Engagement mit dem Adapter. Ich habe ihn wie am Anfang des Posts beschrieben über github installiert, erhalte allerdings folgende Fehlermeldung (der Status im ioBroker ist mir neu).
Die login-Daten (User ID und Passwort) sind definitv richtig, mit diesen Daten habe ich Zugriff in der App.
Wir haben einen Dreame l10s und einen H14Pro
Hat jemand eine Idee?
Dank euch
Hi ich habe aktuell nach einer Neuinstallation, das gleiche Problem. Hab sogar nochmal das Passwort aktualisiert. Bekomme aber keine Verbindung zur Instanz.
Log zeigt folgendes:
2025-10-08 19:26:10.702 - info: host.smarthome Restart adapter system.adapter.dreamehome.0 because enabled 2025-10-08 19:26:41.099 - info: host.smarthome instance system.adapter.dreamehome.0 in version "1.0.0" (non-npm: spayrosam/ioBroker.dreamehome#7893b33ffe944c9e017b2f64a3667fd98da6ddf1) started with pid 687429 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: node:internal/modules/cjs/loader:1865 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: return process.dlopen(module, path.toNamespacedPath(filename)); 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: ^ 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: Error: libcairo.so.2: ELF load command address/offset not page-aligned 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at Object..node (node:internal/modules/cjs/loader:1865:18) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1441:32) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at Function._load (node:internal/modules/cjs/loader:1263:12) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at TracingChannel.traceSync (node:diagnostics_channel:322:14) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at wrapModuleLoad (node:internal/modules/cjs/loader:237:24) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1463:12) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at require (node:internal/modules/helpers:147:16) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/canvas/lib/bindings.js:3:18) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1706:14) 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: at Object..js (node:internal/modules/cjs/loader:1839:10) { 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: code: 'ERR_DLOPEN_FAILED' 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: } 2025-10-08 19:26:41.546 - error: host.smarthome Caught by controller[0]: Node.js v22.20.0 2025-10-08 19:26:41.547 - error: host.smarthome instance system.adapter.dreamehome.0 terminated with code 1 (JS_CONTROLLER_STOPPED)auch nach dem Update auf die Version 1.0 bleibt der Fehler bestehen.
-
-
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: smarthome Icon name: computer Kernel: Linux 6.12.47+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:09:10 up 13 days, 21:08, 2 users, load average: 1.58, 0.76, 0.43 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-10-08 20:09:11 CEST Universal time: Wed 2025-10-08 18:09:11 UTC RTC time: Wed 2025-10-08 18:09:11 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': kai HOME=/home/kai GROUPS=kai adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 17G 5.2G 9.5G 160M 2.6G 11G Swap: 536M 0B 536M Total: 17G 5.2G 10G Active iob-Instances: 36 16219 M total memory 4958 M used memory 4875 M active memory 1687 M inactive memory 9094 M free memory 156 M buffer memory 2282 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 20:09:11 up 13 days, 21:08, 2 users, load average: 1.58, 0.76, 0.43 Tasks: 240 total, 1 running, 239 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 50.0 id, 50.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 16219.1 total, 9094.5 free, 4958.9 used, 2439.0 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 11260.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.9G 0 7.9G 0% /dev tmpfs tmpfs 1.6G 153M 1.5G 10% /run /dev/mmcblk0p2 ext4 115G 8.6G 100G 8% / tmpfs tmpfs 8.0G 0 8.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 57M 454M 12% /boot/firmware tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Sep 24 23:00:56 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=88:A2:9E:27:16:68 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=e11f02e0-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Wed Sep 24 23:00:59 2025] EXT4-fs (mmcblk0p2): mounted filesystem d4cc7d63-da78-48ad-9bdd-64ffbba449a8 ro with ordered data mode. Quota mode: none. [Wed Sep 24 23:01:00 2025] EXT4-fs (mmcblk0p2): re-mounted d4cc7d63-da78-48ad-9bdd-64ffbba449a8 r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.7G /var/ 751M /var/cache 737M /var/cache/apt 621M /var/cache/apt/archives 425M /var/lib Archived and active journals take up 147.6M in the file system. /opt/iobroker/backups: 165M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 512M /opt/iobroker/iobroker-data/ 360M /opt/iobroker/iobroker-data/files 116M /opt/iobroker/iobroker-data/backup-objects 89M /opt/iobroker/iobroker-data/files/vis-2 47M /opt/iobroker/iobroker-data/files/vis-2/widgets The five largest files in iobroker-data are: 26M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.c9369f6c.js.map 17M /opt/iobroker/iobroker-data/files/vis-2.0/Smartpad V1.0/Background/schwarzer-hintergrund-mit-stoffstruktur.jpg 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json 8.8M /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CjzUbllv.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230803151340-if00 *** ZigBee Settings *** Your zigbee.0 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.20.0 /usr/bin/node v22.20.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.20.0-1nodesource1 Candidate: 22.20.0-1nodesource1 Version table: *** 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: smarthome smarthome (version: 7.0.7, hostname: smarthome , alive, uptime: 1199296) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 9.0.11 nodejs modules from github: 3 +-- iobroker.dreame@0.2.2 (git+ssh://git@github.com/TA2k/ioBroker.dreame.git#a0e1b46849b68d02cafe1bdf3504193195e927f8) +-- iobroker.dreamehome@1.0.0 (git+ssh://git@github.com/spayrosam/ioBroker.dreamehome.git#7893b33ffe944c9e017b2f64a3667fd98da6ddf1) +-- iobroker.ws@3.0.19 (git+ssh://git@github.com/ioBroker/ioBroker.ws.git#835702659099b5d0991289a5377d8f2bff4b89ac) Adapter State + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : smarthome - enabled + system.adapter.backitup.0 : backitup : smarthome - enabled + system.adapter.bring.0 : bring : smarthome - enabled + system.adapter.cloud.0 : cloud : smarthome - enabled system.adapter.daswetter.0 : daswetter : smarthome - enabled + system.adapter.discovery.0 : discovery : smarthome - enabled system.adapter.dreame.0 : dreame : smarthome - disabled system.adapter.dreamehome.0 : dreamehome : smarthome - disabled system.adapter.dwd.0 : dwd : smarthome - enabled + system.adapter.e3dc-rscp.0 : e3dc-rscp : smarthome - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: smarthome - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : smarthome - enabled system.adapter.flot.0 : flot : smarthome - disabled + system.adapter.fullybrowser.0 : fullybrowser : smarthome - enabled + system.adapter.geofency.0 : geofency : smarthome - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.history.0 : history : smarthome - enabled + system.adapter.hmip.0 : hmip : smarthome - enabled + system.adapter.hue.0 : hue : smarthome - enabled, port: 443 system.adapter.ical.1 : ical : smarthome - enabled system.adapter.ical.2 : ical : smarthome - enabled system.adapter.ical.3 : ical : smarthome - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : smarthome - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : smarthome - disabled + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.iot.0 : iot : smarthome - enabled + system.adapter.javascript.0 : javascript : smarthome - enabled + system.adapter.matter.0 : matter : smarthome - enabled + system.adapter.meross.0 : meross : smarthome - enabled + system.adapter.ring.0 : ring : smarthome - enabled + system.adapter.rpi2.0 : rpi2 : smarthome - enabled + system.adapter.rssfeed.0 : rssfeed : smarthome - enabled + system.adapter.scenes.0 : scenes : smarthome - enabled + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tesla-motors.0 : tesla-motors : smarthome - enabled + system.adapter.tibberlink.0 : tibberlink : smarthome - enabled + system.adapter.trashschedule.0 : trashschedule : smarthome - enabled + system.adapter.tuya.0 : tuya : smarthome - enabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: smarthome - disabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: smarthome - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: smarthome - disabled system.adapter.vis-2-widgets-rssfeed.0 : vis-2-widgets-rssfeed : smarthome - disabled + system.adapter.vis-2.0 : vis-2 : smarthome - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : smarthome - disabled system.adapter.vis-icontwo.0 : vis-icontwo : smarthome - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : smarthome - enabled + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230803151340-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.geofency.0 : geofency : smarthome - enabled, port: 7999, bind: 0.0.0.0 + system.adapter.hue.0 : hue : smarthome - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230803151340-if00 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "alexa2" : 3.27.3 , installed 3.27.3 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "bring" : 1.8.4 , installed 1.9.1 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.2.3 , installed 3.2.3 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "e3dc-rscp" : 1.4.3 , installed 1.4.2 [Updatable] Adapter "energiefluss-erweitert": 0.7.7, installed 0.7.8 Adapter "fb-checkpresence": 1.4.0 , installed 1.4.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.27.0 , installed 1.27.0 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "ical" : 1.17.0 , installed 1.17.0 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.6.0 Adapter "javascript" : 8.9.2 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "matter" : 0.5.2 , installed 0.5.2 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "ring" : 6.4.0 , installed 6.4.0 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "rssfeed" : 3.6.1 , installed 3.5.2 [Updatable] Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 10.2.0 , installed 10.2.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tesla-motors" : 1.3.2 , installed 1.4.5 Adapter "tibberlink" : 5.0.2 , installed 5.0.2 Adapter "trashschedule": 3.3.0 , installed 4.0.1 Adapter "tuya" : 3.16.0 , installed 3.17.0 Adapter "vis-2" : 2.13.4 , installed 2.13.4 Adapter "vis-2-widgets-inventwo": 0.2.2, installed 0.3.5 Adapter "vis-2-widgets-jaeger-design": 1.2.7, installed 1.4.7 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "vis-2-widgets-rssfeed": 1.2.2, installed 1.2.2 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.18.0 , installed 1.18.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "web" : 7.0.8 , installed 7.0.9 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "zigbee" : 3.0.5 , installed 3.0.5 Objects and States Please stand by - This may take a while Objects: 15266 States: 12774 *** OS-Repositories and Updates *** W: GPG error: https://repos.influxdata.com/debian bookworm InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E E: The repository 'https://repos.influxdata.com/debian bookworm InRelease' is not signed. Pending Updates: 27 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 107 5742 684/influxd tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 3020 685/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 3025 685/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 666 701/sshd: /usr/sbin tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 1157267 97123/io.sonoff.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 6895 1265/io.shelly.0 tcp6 0 0 :::7070 :::* LISTEN 106 6329 805/evcc tcp6 0 0 :::7999 :::* LISTEN 1001 8280 1115/io.geofency.0 tcp6 0 0 :::8086 :::* LISTEN 107 5749 684/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 10282 1580/io.ws.0 tcp6 0 0 :::8082 :::* LISTEN 1001 7884 1565/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 823 816/io.admin.0 tcp6 0 0 :::3000 :::* LISTEN 105 1170476 98315/grafana tcp6 0 0 :::22 :::* LISTEN 0 668 701/sshd: /usr/sbin udp 0 0 0.0.0.0:52970 0.0.0.0:* 104 1992 571/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 7752803 318516/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 3391016 318516/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 3391001 318516/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 3390993 318516/io.matter.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 106 780 805/evcc udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 1990 571/avahi-daemon: r udp 0 0 0.0.0.0:5540 0.0.0.0:* 1001 3391010 318516/io.matter.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 6920 1295/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 6921 1295/io.tuya.0 udp 0 0 0.0.0.0:39468 0.0.0.0:* 1001 3392574 318516/io.matter.0 udp6 0 0 fe80::9b90:5c0c:88d:546 :::* 0 903071 656/NetworkManager udp6 0 0 fe80::1bb1:e9f4:8cf:546 :::* 0 770 656/NetworkManager udp6 0 0 :::5353 :::* 1001 7752804 318516/io.matter.0 udp6 0 0 :::5353 :::* 1001 3391017 318516/io.matter.0 udp6 0 0 :::5353 :::* 1001 3391004 318516/io.matter.0 udp6 0 0 :::5353 :::* 1001 3390996 318516/io.matter.0 udp6 0 0 :::5353 :::* 106 781 805/evcc udp6 0 0 :::5353 :::* 104 1991 571/avahi-daemon: r udp6 0 0 :::5540 :::* 1001 3391009 318516/io.matter.0 udp6 0 0 :::39120 :::* 104 1993 571/avahi-daemon: r udp6 0 0 :::39468 :::* 1001 3392573 318516/io.matter.0 *** Log File - Last 25 Lines *** 2025-10-08 20:00:06.531 - info: ical.2 (688853) processing URL: Kai https://calendar.google.com/calendar/ical/reeflover82%40gmail.com/private-47d92a1cdbeae54baf7a78aa1cdf3bf3/basic.ics 2025-10-08 20:00:06.774 - info: ical.3 (688815) Terminated (NO_ERROR): Without reason 2025-10-08 20:00:07.294 - info: host.smarthome instance system.adapter.ical.3 having pid 688815 terminated with code 0 (NO_ERROR) 2025-10-08 20:00:10.012 - info: host.smarthome instance system.adapter.daswetter.0 in version "3.2.3" started with pid 688870 2025-10-08 20:00:11.698 - info: daswetter.0 (688870) starting. Version 3.2.3 in /opt/iobroker/node_modules/iobroker.daswetter, node: v22.20.0, js-controller: 7.0.7 2025-10-08 20:00:11.783 - info: ical.2 (688853) Terminated (NO_ERROR): Without reason 2025-10-08 20:00:12.330 - info: host.smarthome instance system.adapter.ical.2 having pid 688853 terminated with code 0 (NO_ERROR) 2025-10-08 20:00:20.426 - info: daswetter.0 (688870) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2025-10-08 20:00:20.931 - info: daswetter.0 (688870) cleaned everything up... 2025-10-08 20:00:20.941 - info: host.smarthome instance system.adapter.daswetter.0 having pid 688870 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-10-08 20:00:23.010 - info: host.smarthome instance system.adapter.dwd.0 in version "2.8.5" started with pid 688885 2025-10-08 20:00:23.947 - info: dwd.0 (688885) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v22.20.0, js-controller: 7.0.7 2025-10-08 20:00:24.318 - info: dwd.0 (688885) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-08 20:00:24.831 - info: host.smarthome instance system.adapter.dwd.0 having pid 688885 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-10-08 20:03:06.185 - info: web.0 (1565) <== Disconnect system.user.admin from ::ffff:192.168.178.180 vis-2 2025-10-08 20:03:07.549 - info: web.0 (1565) ==> Connected system.user.admin from ::ffff:192.168.178.180 2025-10-08 20:03:09.713 - info: vis-2.0 (1535) vis-2 license is OK. 2025-10-08 20:04:54.175 - warn: e3dc-rscp.0 (1387) Received data type ERROR: RSCP_ERR_NOT_AVAILABLE (6) - tag TAG_EMS_EMERGENCY_POWER_TEST_STATUS (0x1800093) 2025-10-08 20:05:23.014 - info: host.smarthome instance system.adapter.dwd.0 in version "2.8.5" started with pid 689034 2025-10-08 20:05:23.964 - info: dwd.0 (689034) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v22.20.0, js-controller: 7.0.7 2025-10-08 20:05:24.312 - info: dwd.0 (689034) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2025-10-08 20:05:24.831 - info: host.smarthome instance system.adapter.dwd.0 having pid 689034 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2025-10-08 20:08:19.638 - info: web.0 (1565) <== Disconnect system.user.admin from ::ffff:192.168.178.180 vis-2 2025-10-08 20:08:21.029 - info: web.0 (1565) ==> Connected system.user.admin from ::ffff:192.168.178.180 2025-10-08 20:08:23.126 - info: vis-2.0 (1535) vis-2 license is OK. -
Soweit passt das eigentlich.
Leg das Influxdb-Repo nochmal neu an:https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind
Und dann die updates einspielen. Sowohl für das Betriebssystem wie auch für den ioBroker.
Perspektivisch auch da in diesem Winter RaspberryOS 13 installieren.
