NEWS
ioBroker startet nicht
-
@homoran das wäre genau mein Problem. Das Backup liegt mir nur für PivCCu vor. Heißt ich müsste alles neu von Hand eingeben und das dauert :)
Ich hatte jetzt die Hoffnung, es sieht jemand den Fehlercode und der lässt sich mit einem "fix" beheben.
@daniel-5 sagte in ioBroker startet nicht:
es sieht jemand den Fehlercode
es gibt keinen Fehlercode.
Das Dateisystem (und ggf. deine SD Karte) hat einen Schaden.
Durch das intensive Neustarten und die nachgeholten Updates haven wahrscheinlich ihr übriges dazu beigetragen. -
@homoran das wäre genau mein Problem. Das Backup liegt mir nur für PivCCu vor. Heißt ich müsste alles neu von Hand eingeben und das dauert :)
Ich hatte jetzt die Hoffnung, es sieht jemand den Fehlercode und der lässt sich mit einem "fix" beheben.
Versuch mal
cd /opt/iobroker iob stop sudo -H -u iobroker npm install iobroker.js-controller@7.0.6 --omit=dev iob start -
Versuch mal
cd /opt/iobroker iob stop sudo -H -u iobroker npm install iobroker.js-controller@7.0.6 --omit=dev iob startDanke für eure schnellen Antworten. Jetzt war ich leider zu schnell und installiere gerade neu :(
-
Danke für eure schnellen Antworten. Jetzt war ich leider zu schnell und installiere gerade neu :(
-
Danke für eure schnellen Antworten. Jetzt war ich leider zu schnell und installiere gerade neu :(
Dann richte jetzt den Backitup-Adapter für den ioBroker ein...
-
-
Dann richte jetzt den Backitup-Adapter für den ioBroker ein...
@thomas-braun der war tatsächlich auch vorher schon eingerichtet, allerdings konnte ich die Dateien nicht abrufen
-
@daniel-5 sagte in ioBroker startet nicht:
@homoran ja - aber mit vollständiger Formatierung
macht man beides nicht ;-)
Wenn die Karte einen Schuss weg hat, ist das eine Zeitbombe.
Formatierung hoffentlich mit SD-Card Formatter und nicht mit PC-Bordmitteln.Bei einer neuen Karte hättest du die alte noch als Hardware-Backup gehabt.
-
@thomas-braun der war tatsächlich auch vorher schon eingerichtet, allerdings konnte ich die Dateien nicht abrufen
@daniel-5 sagte in ioBroker startet nicht:
allerdings konnte ich die Dateien nicht abrufen
waren die auf der Karte?
oder "auswärts"? -
@daniel-5 sagte in ioBroker startet nicht:
allerdings konnte ich die Dateien nicht abrufen
waren die auf der Karte?
oder "auswärts"?@homoran die waren auf der Karte und auf meinem Mac. Eigentlich in der Cloud. Aber da ist lediglich nur noch das Homematic Backup.
Wo ich euch aber beide gerade hier habe: Habt ihr folgenden Fehler schonmal gehabt? Im Netz finde ich leider nichts hilfreiches. Dies tritt jetzt während der Vorbereitung (Funkmodul etc. aktivieren) der pivccu nach dem Neustart auf, bevor das eigentliche Programm installiert werden soll.
danielsmacbook:~ daniel$ ssh 192.168.178.45 ssh: connect to host 192.168.178.45 port 22: No route to host danielsmacbook:~ daniel$ ssh daniel@192.168.178.45 ssh: connect to host 192.168.178.45 port 22: Operation timed out -
@homoran die waren auf der Karte und auf meinem Mac. Eigentlich in der Cloud. Aber da ist lediglich nur noch das Homematic Backup.
Wo ich euch aber beide gerade hier habe: Habt ihr folgenden Fehler schonmal gehabt? Im Netz finde ich leider nichts hilfreiches. Dies tritt jetzt während der Vorbereitung (Funkmodul etc. aktivieren) der pivccu nach dem Neustart auf, bevor das eigentliche Programm installiert werden soll.
danielsmacbook:~ daniel$ ssh 192.168.178.45 ssh: connect to host 192.168.178.45 port 22: No route to host danielsmacbook:~ daniel$ ssh daniel@192.168.178.45 ssh: connect to host 192.168.178.45 port 22: Operation timed out@daniel-5 sagte in ioBroker startet nicht:
No route to host
da hast du Netzwerkprobleme.
gibt es die .45 überhaupt? -
@homoran die waren auf der Karte und auf meinem Mac. Eigentlich in der Cloud. Aber da ist lediglich nur noch das Homematic Backup.
Wo ich euch aber beide gerade hier habe: Habt ihr folgenden Fehler schonmal gehabt? Im Netz finde ich leider nichts hilfreiches. Dies tritt jetzt während der Vorbereitung (Funkmodul etc. aktivieren) der pivccu nach dem Neustart auf, bevor das eigentliche Programm installiert werden soll.
danielsmacbook:~ daniel$ ssh 192.168.178.45 ssh: connect to host 192.168.178.45 port 22: No route to host danielsmacbook:~ daniel$ ssh daniel@192.168.178.45 ssh: connect to host 192.168.178.45 port 22: Operation timed outLebt der host unter der IP?
ProTipp: Verwende hostnames, IPs sind aus dem letzten Jahrtausend... -
Lebt der host unter der IP?
ProTipp: Verwende hostnames, IPs sind aus dem letzten Jahrtausend...@thomas-braun Bis zu dem Neustart lebt er unter der IP. Nach dem Neustart ist er ebenfalls im Router unter der gleichen IP sichtbar.
Übers Terminal ist er dann aber schon nicht mehr erreichbar und nach x Minuten (ca. 30 geschätzt) geht er dann komplett auch im Router offline.
Installiere ich wieder komplett neu, funktioniert er wieder bis zum oben genannten Step.
-
@thomas-braun Bis zu dem Neustart lebt er unter der IP. Nach dem Neustart ist er ebenfalls im Router unter der gleichen IP sichtbar.
Übers Terminal ist er dann aber schon nicht mehr erreichbar und nach x Minuten (ca. 30 geschätzt) geht er dann komplett auch im Router offline.
Installiere ich wieder komplett neu, funktioniert er wieder bis zum oben genannten Step.
@daniel-5 sagte in ioBroker startet nicht:
funktioniert er wieder bis zum oben genannten Step.
...und der wäre?
-
@daniel-5 sagte in ioBroker startet nicht:
funktioniert er wieder bis zum oben genannten Step.
...und der wäre?
-
@homoran ich installiere nach dieser Anleitung. Hat bei den letzen Malen auch hervorragend funktioniert.
https://www.electronicstudio.de/homematic-ccu-pivccu-installieren
Der Fehler tritt nach Punkt 3 und dem Reboot auf.
@daniel-5 Warum zeigst du nichts?
Die Anleitung nutzt nichts. Da steht nicht was bei dir passiert
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1warum nicht die Anleitung von Alex aus der piVCCU Seite bei Github?
nochmal: wer ist .45?
Hast du Tastatur und Monitor am Pi?
Was sagtsudo pivccu info?bitte mehr Informationen!
-
@daniel-5 Warum zeigst du nichts?
Die Anleitung nutzt nichts. Da steht nicht was bei dir passiert
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1warum nicht die Anleitung von Alex aus der piVCCU Seite bei Github?
nochmal: wer ist .45?
Hast du Tastatur und Monitor am Pi?
Was sagtsudo pivccu info?bitte mehr Informationen!
.45 ist der Raspi. Hab jetzt die Anleitung von Alex aus Github genommen. Gleicher Fehler nach dem Reboot komm ich nicht mehr rein.
Nein für Raspi habe ich keine Tastatur oder Monitor.
daniel@RaspberryPi5:~ $ wget -q -O - https://apt.pivccu.de/piVCCU/public.key | sudo tee /usr/share/keyrings/pivccu.asc -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.4.14 (GNU/Linux) mQENBFJsL6IBCADMlaNsEi/CXNdYeacssVfjj+//N0VNjRdV+BIRB7WUvEZX6dS5 FNiJpJAohYmQWNz16jCI2uMuPOLsTl10K0CIUmfVtCeHQCe0w13AJMRJSA3/JoPJ ZBkZ05xY7Wqh3HTRy8hI7f6ZCtWjsmQvA9r3T6FUd6/5cBZxFCSI4llS6vDsREk6 G+05T78FNtfaxHfobYZI16qMzWevvNqjBn7rQZLn4TBNuvqnhshpoYZUnjCi1Yoz UjcReKhGNIC6kfeoFIoHy3fFKAQwknZnN6mXflGP5IVEH6jm790LZIDwrdGU8avf 97JloGWQXtd35psHaMPm02zffz3QozlmMtZBABEBAAG0NkFsZXhhbmRlciBSZWlu ZXJ0IChQYWNrYWdlIFNpZ25pbmcpIDxhbGV4QGFyZWluZXJ0LmRlPokBOAQTAQIA IgUCUmwvogIbAwYLCQgHAwIGFQgCCQoLBBYCAwECHgECF4AACgkQVBIwugXDi8QT FAf8DBGo1c00wWC2RwpFo414hGrEqlQTt8wWEwZJdPByO7i3ZNHvYpqjJr/8HR50 uyxg9Xomg2Gb03vD1xjdVPAZcTz2Jtfa6JiNmN1hC3Wxz0fUbwKcdEdhhXr8iRts 1EycRjjy4O3J2ty5kEjI5WCjnyGyqAxdIOPpocyzIIWBSBGHfy6fI9/35LNmZ2Tr 6XJJJfI7NXcrKzu48YEQxy4QdvpEI5ahwJmyFjVJjFM8HtFOVxliFOzMjzkvhiEo SwO2SQvo0o2MdBsl3OlzvwNm0z6ffh8/3uGk0WmwaFoeCRs+plkG2zy/GOS7YrSY DrpLTIThPQQV3A2rFFqRVYqZ8bkBDQRSbC+iAQgApIQ4HmDzQYwLgMrEgDVts/8S fIdKHxeZ0MSltbNbgUwptfeW+LhtWBJ6niZkV+7U7kSGEbZBGWqsybEHdGcG3S4N xlR9AoCEPRoiwbChy0nOOYCDySgfk35coP32+yzcAVvvCx/Tu8rdl4H+l00a23nl x3aiRPlWkrrDJg5GqAkIfTX9j/MCGDYJ4j5TCWT4FbGuEF+fExgko5cUzG8y/2Hz aHcEfC+Zt4P48Ir9MGwcImY45uHr8Z4UOaQ1WQBG8KAxKWmpqhik/8rLro91GnaA L0Hip+vgkT7+Y7iPbVxIp+hr7wnHt7WCiccUXMIpCvo93GLR9jcReIzCx0/gOQAR AQABiQEfBBgBAgAJBQJSbC+iAhsMAAoJEFQSMLoFw4vE0z8H/jQPJtfdh8s9AgWl hhzCsm0b8LmhYW4bmOrbN5PCI1qTfnP68GCAOFHYqnGSbJvMYp07Yfcx90KRYP4E yQxsVbnaiVj3d3teH8o7Nw8WaH+9XKsfg/vAyc7VRtr1UB0IvolGdeNeXjvJ3/PG AfsSY8CGlA6ClBhZ8+q5cUVJLCvy+4emvXTiwJ4XZp96bmBHkit9QFbrqSoIo3Vr gF0f4ZB/NFyL0VcZscH9yE4BXAqvs5uIGt8QQ03YrQJ2/JLzu/jUe0iEB3WWXxFm JDDElWaDoRMaZTSxJgzuRi9/xhMlNRS45CI38FpiCS9AWgmyBBq9xKI6BMLunRWj 4CUtOWQ= =jgj0 -----END PGP PUBLIC KEY BLOCK----- daniel@RaspberryPi5:~ $ echo "deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main" | sudo tee /etc/apt/sources.list.d/pivccu.list sudo apt update deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main Get:1 http://deb.debian.org/debian bookworm InRelease [151 kB] Get:2 http://archive.raspberrypi.com/debian bookworm InRelease [55.0 kB] Get:3 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Get:4 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] Get:5 https://apt.pivccu.de/piVCCU stable InRelease [13.6 kB] Get:6 http://deb.debian.org/debian bookworm/main armhf Packages [8,508 kB] Get:7 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [540 kB] Get:8 https://apt.pivccu.de/piVCCU stable/main armhf Packages [16.4 kB] Get:9 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [538 kB] Get:10 https://apt.pivccu.de/piVCCU stable/main arm64 Packages [16.5 kB] Get:11 http://deb.debian.org/debian bookworm/main arm64 Packages [8,693 kB] Get:12 http://deb.debian.org/debian bookworm/main Translation-en [6,109 kB] Get:13 http://deb.debian.org/debian bookworm/contrib arm64 Packages [45.7 kB] Get:14 http://deb.debian.org/debian bookworm/contrib Translation-en [48.4 kB] Get:15 http://deb.debian.org/debian bookworm/non-free armhf Packages [55.9 kB] Get:16 http://deb.debian.org/debian bookworm/non-free arm64 Packages [75.8 kB] Get:17 http://deb.debian.org/debian bookworm/non-free Translation-en [68.1 kB] Get:18 http://deb.debian.org/debian bookworm/non-free-firmware arm64 Packages [5,832 B] Get:19 http://deb.debian.org/debian bookworm/non-free-firmware Translation-en [20.9 kB] Get:20 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [248 kB] Get:21 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [263 kB] Get:22 http://deb.debian.org/debian-security bookworm-security/main Translation-en [160 kB] Get:23 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [756 B] Get:24 http://deb.debian.org/debian bookworm-updates/main armhf Packages [756 B] Get:25 http://deb.debian.org/debian bookworm-updates/main Translation-en [664 B] Fetched 25.7 MB in 4s (6,714 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 77 packages can be upgraded. Run 'apt list --upgradable' to see them. N: Repository 'http://deb.debian.org/debian bookworm InRelease' changed its 'Version' value from '12.10' to '12.11' daniel@RaspberryPi5:~ $ sudo apt install build-essential bison flex libssl-dev sudo apt install raspberrypi-kernel-headers pivccu-modules-dkms Reading package lists... Done Building dependency tree... Done Reading state information... Done build-essential is already the newest version (12.9). The following additional packages will be installed: libfl-dev libfl2 m4 Suggested packages: bison-doc flex-doc libssl-doc m4-doc The following NEW packages will be installed: bison flex libfl-dev libfl2 libssl-dev m4 0 upgraded, 6 newly installed, 0 to remove and 77 not upgraded. Need to get 5,453 kB of archives. After this operation, 18.7 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get:2 http://archive.raspberrypi.com/debian bookworm/main arm64 libssl-dev arm64 3.0.16-1~deb12u1+rpt1 [3,444 kB] Get:3 http://deb.debian.org/debian bookworm/main arm64 flex arm64 2.6.4-8.2 [411 kB] Get:4 http://deb.debian.org/debian bookworm/main arm64 bison arm64 2:3.8.2+dfsg-1+b1 [1,152 kB] Get:5 http://deb.debian.org/debian bookworm/main arm64 libfl2 arm64 2.6.4-8.2 [84.1 kB] Get:6 http://deb.debian.org/debian bookworm/main arm64 libfl-dev arm64 2.6.4-8.2 [85.3 kB] Fetched 5,453 kB in 1s (9,531 kB/s) Selecting previously unselected package m4. (Reading database ... 56180 files and directories currently installed.) Preparing to unpack .../0-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package flex. Preparing to unpack .../1-flex_2.6.4-8.2_arm64.deb ... Unpacking flex (2.6.4-8.2) ... Selecting previously unselected package bison. Preparing to unpack .../2-bison_2%3a3.8.2+dfsg-1+b1_arm64.deb ... Unpacking bison (2:3.8.2+dfsg-1+b1) ... Selecting previously unselected package libfl2:arm64. Preparing to unpack .../3-libfl2_2.6.4-8.2_arm64.deb ... Unpacking libfl2:arm64 (2.6.4-8.2) ... Selecting previously unselected package libfl-dev:arm64. Preparing to unpack .../4-libfl-dev_2.6.4-8.2_arm64.deb ... Unpacking libfl-dev:arm64 (2.6.4-8.2) ... Selecting previously unselected package libssl-dev:arm64. Preparing to unpack .../5-libssl-dev_3.0.16-1~deb12u1+rpt1_arm64.deb ... Unpacking libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ... Setting up m4 (1.4.19-3) ... Setting up libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ... Setting up libfl2:arm64 (2.6.4-8.2) ... Setting up bison (2:3.8.2+dfsg-1+b1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up flex (2.6.4-8.2) ... Setting up libfl-dev:arm64 (2.6.4-8.2) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u10) ... Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: dkms Suggested packages: menu The following NEW packages will be installed: dkms pivccu-modules-dkms raspberrypi-kernel-headers 0 upgraded, 3 newly installed, 0 to remove and 77 not upgraded. Need to get 10.3 MB of archives. After this operation, 65.0 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://archive.raspberrypi.com/debian bookworm/main arm64 raspberrypi-kernel-headers arm64 1:1.20230405-1 [10.2 MB] Get:2 http://deb.debian.org/debian bookworm/main arm64 dkms all 3.0.10-8+deb12u1 [48.7 kB] Get:3 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-dkms all 1.0.85 [43.2 kB] Fetched 10.3 MB in 1s (9,427 kB/s) Preconfiguring packages ... Selecting previously unselected package dkms. (Reading database ... 56756 files and directories currently installed.) Preparing to unpack .../dkms_3.0.10-8+deb12u1_all.deb ... Unpacking dkms (3.0.10-8+deb12u1) ... Setting up dkms (3.0.10-8+deb12u1) ... Selecting previously unselected package pivccu-modules-dkms. (Reading database ... 56780 files and directories currently installed.) Preparing to unpack .../pivccu-modules-dkms_1.0.85_all.deb ... Unpacking pivccu-modules-dkms (1.0.85) ... Selecting previously unselected package raspberrypi-kernel-headers. Preparing to unpack .../raspberrypi-kernel-headers_1%3a1.20230405-1_arm64.deb ... Unpacking raspberrypi-kernel-headers (1:1.20230405-1) ... Setting up raspberrypi-kernel-headers (1:1.20230405-1) ... run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21+ dkms: autoinstall for kernel 6.1.21+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7+ dkms: autoinstall for kernel 6.1.21-v7+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7l+ dkms: autoinstall for kernel 6.1.21-v7l+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v8+ dkms: running auto installation service for kernel 6.1.21-v8+. dkms: autoinstall for kernel: 6.1.21-v8+. Setting up pivccu-modules-dkms (1.0.85) ... Ensure non mixed processor architecure ... Done Create kernel modules ... Done Enable DKMS service ... Done Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo apt install pivccu-modules-raspberrypi Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: bc The following NEW packages will be installed: bc pivccu-modules-raspberrypi 0 upgraded, 2 newly installed, 0 to remove and 77 not upgraded. Need to get 110 kB of archives. After this operation, 242 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bookworm/main arm64 bc arm64 1.07.1-3 [107 kB] Get:2 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-raspberrypi all 2.0-19 [2,940 B] Fetched 110 kB in 0s (682 kB/s) Preconfiguring packages ... Selecting previously unselected package bc. (Reading database ... 74877 files and directories currently installed.) Preparing to unpack .../archives/bc_1.07.1-3_arm64.deb ... Unpacking bc (1.07.1-3) ... Selecting previously unselected package pivccu-modules-raspberrypi. Preparing to unpack .../pivccu-modules-raspberrypi_2.0-19_all.deb ... dpkg-divert: warning: please specify --no-rename explicitly, the default will change to --rename in 1.20.x Adding 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack' Unpacking pivccu-modules-raspberrypi (2.0-19) ... Setting up bc (1.07.1-3) ... Setting up pivccu-modules-raspberrypi (2.0-19) ... Removing 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack' Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-rpi-modules.service → /lib/systemd/system/pivccu-rpi-modules.service. Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo bash -c 'cat << EOT >> /boot/firmware/config.txt dtoverlay=pi3-disable-bt EOT' sudo systemctl disable hciuart.service Removed "/etc/systemd/system/dev-serial1.device.wants/hciuart.service". daniel@RaspberryPi5:~ $ sudo sed -i /boot/firmware/cmdline.txt -e "s/console=serial0,[0-9]\+ //" sudo sed -i /boot/firmware/cmdline.txt -e "s/console=ttyAMA0,[0-9]\+ //" daniel@RaspberryPi5:~ $ sudo ip link show | cut -d' ' -f2 | cut -d: -f1 | grep -e '^e.*' eth0 daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5 sudo apt install bridge-utils sudo bash -c 'cat << EOT > /etc/network/interfaces source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 EOT' Reading package lists... Done Building dependency tree... Done Reading state information... Done Package 'dhcpcd5' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done Suggested packages: ifupdown The following NEW packages will be installed: bridge-utils 0 upgraded, 1 newly installed, 0 to remove and 77 not upgraded. Need to get 34.3 kB of archives. After this operation, 145 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian bookworm/main arm64 bridge-utils arm64 1.7.1-1 [34.3 kB] Fetched 34.3 kB in 0s (388 kB/s) Selecting previously unselected package bridge-utils. (Reading database ... 74901 files and directories currently installed.) Preparing to unpack .../bridge-utils_1.7.1-1_arm64.deb ... Unpacking bridge-utils (1.7.1-1) ... Setting up bridge-utils (1.7.1-1) ... Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5 sudo apt install bridge-utils sudo bash -c 'cat << EOT > /etc/network/interfaces source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet static bridge_ports eth0 address <address> netmask <netmask> gateway <gateway> dns-nameservers <dns1> <dns2> EOT' Reading package lists... Done Building dependency tree... Done Reading state information... Done Package 'dhcpcd5' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done bridge-utils is already the newest version (1.7.1-1). 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. daniel@RaspberryPi5:~ $ sudo reboot Broadcast message from root@RaspberryPi5 on pts/1 (Fri 2025-06-20 08:44:58 BST): The system will reboot now! daniel@RaspberryPi5:~ $ Connection to 192.168.178.45 closed by remote host. Connection to 192.168.178.45 closed. danielsmacbook:~ daniel$ ssh daniel@RaspberryPi5 ssh: connect to host raspberrypi5 port 22: Operation timed out danielsmacbook:~ daniel$ ssh 192.168.178.45 ssh: connect to host 192.168.178.45 port 22: Operation timed out danielsmacbook:~ daniel$ -
.45 ist der Raspi. Hab jetzt die Anleitung von Alex aus Github genommen. Gleicher Fehler nach dem Reboot komm ich nicht mehr rein.
Nein für Raspi habe ich keine Tastatur oder Monitor.
daniel@RaspberryPi5:~ $ wget -q -O - https://apt.pivccu.de/piVCCU/public.key | sudo tee /usr/share/keyrings/pivccu.asc -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.4.14 (GNU/Linux) mQENBFJsL6IBCADMlaNsEi/CXNdYeacssVfjj+//N0VNjRdV+BIRB7WUvEZX6dS5 FNiJpJAohYmQWNz16jCI2uMuPOLsTl10K0CIUmfVtCeHQCe0w13AJMRJSA3/JoPJ ZBkZ05xY7Wqh3HTRy8hI7f6ZCtWjsmQvA9r3T6FUd6/5cBZxFCSI4llS6vDsREk6 G+05T78FNtfaxHfobYZI16qMzWevvNqjBn7rQZLn4TBNuvqnhshpoYZUnjCi1Yoz UjcReKhGNIC6kfeoFIoHy3fFKAQwknZnN6mXflGP5IVEH6jm790LZIDwrdGU8avf 97JloGWQXtd35psHaMPm02zffz3QozlmMtZBABEBAAG0NkFsZXhhbmRlciBSZWlu ZXJ0IChQYWNrYWdlIFNpZ25pbmcpIDxhbGV4QGFyZWluZXJ0LmRlPokBOAQTAQIA IgUCUmwvogIbAwYLCQgHAwIGFQgCCQoLBBYCAwECHgECF4AACgkQVBIwugXDi8QT FAf8DBGo1c00wWC2RwpFo414hGrEqlQTt8wWEwZJdPByO7i3ZNHvYpqjJr/8HR50 uyxg9Xomg2Gb03vD1xjdVPAZcTz2Jtfa6JiNmN1hC3Wxz0fUbwKcdEdhhXr8iRts 1EycRjjy4O3J2ty5kEjI5WCjnyGyqAxdIOPpocyzIIWBSBGHfy6fI9/35LNmZ2Tr 6XJJJfI7NXcrKzu48YEQxy4QdvpEI5ahwJmyFjVJjFM8HtFOVxliFOzMjzkvhiEo SwO2SQvo0o2MdBsl3OlzvwNm0z6ffh8/3uGk0WmwaFoeCRs+plkG2zy/GOS7YrSY DrpLTIThPQQV3A2rFFqRVYqZ8bkBDQRSbC+iAQgApIQ4HmDzQYwLgMrEgDVts/8S fIdKHxeZ0MSltbNbgUwptfeW+LhtWBJ6niZkV+7U7kSGEbZBGWqsybEHdGcG3S4N xlR9AoCEPRoiwbChy0nOOYCDySgfk35coP32+yzcAVvvCx/Tu8rdl4H+l00a23nl x3aiRPlWkrrDJg5GqAkIfTX9j/MCGDYJ4j5TCWT4FbGuEF+fExgko5cUzG8y/2Hz aHcEfC+Zt4P48Ir9MGwcImY45uHr8Z4UOaQ1WQBG8KAxKWmpqhik/8rLro91GnaA L0Hip+vgkT7+Y7iPbVxIp+hr7wnHt7WCiccUXMIpCvo93GLR9jcReIzCx0/gOQAR AQABiQEfBBgBAgAJBQJSbC+iAhsMAAoJEFQSMLoFw4vE0z8H/jQPJtfdh8s9AgWl hhzCsm0b8LmhYW4bmOrbN5PCI1qTfnP68GCAOFHYqnGSbJvMYp07Yfcx90KRYP4E yQxsVbnaiVj3d3teH8o7Nw8WaH+9XKsfg/vAyc7VRtr1UB0IvolGdeNeXjvJ3/PG AfsSY8CGlA6ClBhZ8+q5cUVJLCvy+4emvXTiwJ4XZp96bmBHkit9QFbrqSoIo3Vr gF0f4ZB/NFyL0VcZscH9yE4BXAqvs5uIGt8QQ03YrQJ2/JLzu/jUe0iEB3WWXxFm JDDElWaDoRMaZTSxJgzuRi9/xhMlNRS45CI38FpiCS9AWgmyBBq9xKI6BMLunRWj 4CUtOWQ= =jgj0 -----END PGP PUBLIC KEY BLOCK----- daniel@RaspberryPi5:~ $ echo "deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main" | sudo tee /etc/apt/sources.list.d/pivccu.list sudo apt update deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main Get:1 http://deb.debian.org/debian bookworm InRelease [151 kB] Get:2 http://archive.raspberrypi.com/debian bookworm InRelease [55.0 kB] Get:3 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Get:4 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] Get:5 https://apt.pivccu.de/piVCCU stable InRelease [13.6 kB] Get:6 http://deb.debian.org/debian bookworm/main armhf Packages [8,508 kB] Get:7 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [540 kB] Get:8 https://apt.pivccu.de/piVCCU stable/main armhf Packages [16.4 kB] Get:9 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [538 kB] Get:10 https://apt.pivccu.de/piVCCU stable/main arm64 Packages [16.5 kB] Get:11 http://deb.debian.org/debian bookworm/main arm64 Packages [8,693 kB] Get:12 http://deb.debian.org/debian bookworm/main Translation-en [6,109 kB] Get:13 http://deb.debian.org/debian bookworm/contrib arm64 Packages [45.7 kB] Get:14 http://deb.debian.org/debian bookworm/contrib Translation-en [48.4 kB] Get:15 http://deb.debian.org/debian bookworm/non-free armhf Packages [55.9 kB] Get:16 http://deb.debian.org/debian bookworm/non-free arm64 Packages [75.8 kB] Get:17 http://deb.debian.org/debian bookworm/non-free Translation-en [68.1 kB] Get:18 http://deb.debian.org/debian bookworm/non-free-firmware arm64 Packages [5,832 B] Get:19 http://deb.debian.org/debian bookworm/non-free-firmware Translation-en [20.9 kB] Get:20 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [248 kB] Get:21 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [263 kB] Get:22 http://deb.debian.org/debian-security bookworm-security/main Translation-en [160 kB] Get:23 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [756 B] Get:24 http://deb.debian.org/debian bookworm-updates/main armhf Packages [756 B] Get:25 http://deb.debian.org/debian bookworm-updates/main Translation-en [664 B] Fetched 25.7 MB in 4s (6,714 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 77 packages can be upgraded. Run 'apt list --upgradable' to see them. N: Repository 'http://deb.debian.org/debian bookworm InRelease' changed its 'Version' value from '12.10' to '12.11' daniel@RaspberryPi5:~ $ sudo apt install build-essential bison flex libssl-dev sudo apt install raspberrypi-kernel-headers pivccu-modules-dkms Reading package lists... Done Building dependency tree... Done Reading state information... Done build-essential is already the newest version (12.9). The following additional packages will be installed: libfl-dev libfl2 m4 Suggested packages: bison-doc flex-doc libssl-doc m4-doc The following NEW packages will be installed: bison flex libfl-dev libfl2 libssl-dev m4 0 upgraded, 6 newly installed, 0 to remove and 77 not upgraded. Need to get 5,453 kB of archives. After this operation, 18.7 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get:2 http://archive.raspberrypi.com/debian bookworm/main arm64 libssl-dev arm64 3.0.16-1~deb12u1+rpt1 [3,444 kB] Get:3 http://deb.debian.org/debian bookworm/main arm64 flex arm64 2.6.4-8.2 [411 kB] Get:4 http://deb.debian.org/debian bookworm/main arm64 bison arm64 2:3.8.2+dfsg-1+b1 [1,152 kB] Get:5 http://deb.debian.org/debian bookworm/main arm64 libfl2 arm64 2.6.4-8.2 [84.1 kB] Get:6 http://deb.debian.org/debian bookworm/main arm64 libfl-dev arm64 2.6.4-8.2 [85.3 kB] Fetched 5,453 kB in 1s (9,531 kB/s) Selecting previously unselected package m4. (Reading database ... 56180 files and directories currently installed.) Preparing to unpack .../0-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package flex. Preparing to unpack .../1-flex_2.6.4-8.2_arm64.deb ... Unpacking flex (2.6.4-8.2) ... Selecting previously unselected package bison. Preparing to unpack .../2-bison_2%3a3.8.2+dfsg-1+b1_arm64.deb ... Unpacking bison (2:3.8.2+dfsg-1+b1) ... Selecting previously unselected package libfl2:arm64. Preparing to unpack .../3-libfl2_2.6.4-8.2_arm64.deb ... Unpacking libfl2:arm64 (2.6.4-8.2) ... Selecting previously unselected package libfl-dev:arm64. Preparing to unpack .../4-libfl-dev_2.6.4-8.2_arm64.deb ... Unpacking libfl-dev:arm64 (2.6.4-8.2) ... Selecting previously unselected package libssl-dev:arm64. Preparing to unpack .../5-libssl-dev_3.0.16-1~deb12u1+rpt1_arm64.deb ... Unpacking libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ... Setting up m4 (1.4.19-3) ... Setting up libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ... Setting up libfl2:arm64 (2.6.4-8.2) ... Setting up bison (2:3.8.2+dfsg-1+b1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up flex (2.6.4-8.2) ... Setting up libfl-dev:arm64 (2.6.4-8.2) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u10) ... Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: dkms Suggested packages: menu The following NEW packages will be installed: dkms pivccu-modules-dkms raspberrypi-kernel-headers 0 upgraded, 3 newly installed, 0 to remove and 77 not upgraded. Need to get 10.3 MB of archives. After this operation, 65.0 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://archive.raspberrypi.com/debian bookworm/main arm64 raspberrypi-kernel-headers arm64 1:1.20230405-1 [10.2 MB] Get:2 http://deb.debian.org/debian bookworm/main arm64 dkms all 3.0.10-8+deb12u1 [48.7 kB] Get:3 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-dkms all 1.0.85 [43.2 kB] Fetched 10.3 MB in 1s (9,427 kB/s) Preconfiguring packages ... Selecting previously unselected package dkms. (Reading database ... 56756 files and directories currently installed.) Preparing to unpack .../dkms_3.0.10-8+deb12u1_all.deb ... Unpacking dkms (3.0.10-8+deb12u1) ... Setting up dkms (3.0.10-8+deb12u1) ... Selecting previously unselected package pivccu-modules-dkms. (Reading database ... 56780 files and directories currently installed.) Preparing to unpack .../pivccu-modules-dkms_1.0.85_all.deb ... Unpacking pivccu-modules-dkms (1.0.85) ... Selecting previously unselected package raspberrypi-kernel-headers. Preparing to unpack .../raspberrypi-kernel-headers_1%3a1.20230405-1_arm64.deb ... Unpacking raspberrypi-kernel-headers (1:1.20230405-1) ... Setting up raspberrypi-kernel-headers (1:1.20230405-1) ... run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21+ dkms: autoinstall for kernel 6.1.21+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7+ dkms: autoinstall for kernel 6.1.21-v7+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7l+ dkms: autoinstall for kernel 6.1.21-v7l+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v8+ dkms: running auto installation service for kernel 6.1.21-v8+. dkms: autoinstall for kernel: 6.1.21-v8+. Setting up pivccu-modules-dkms (1.0.85) ... Ensure non mixed processor architecure ... Done Create kernel modules ... Done Enable DKMS service ... Done Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo apt install pivccu-modules-raspberrypi Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: bc The following NEW packages will be installed: bc pivccu-modules-raspberrypi 0 upgraded, 2 newly installed, 0 to remove and 77 not upgraded. Need to get 110 kB of archives. After this operation, 242 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bookworm/main arm64 bc arm64 1.07.1-3 [107 kB] Get:2 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-raspberrypi all 2.0-19 [2,940 B] Fetched 110 kB in 0s (682 kB/s) Preconfiguring packages ... Selecting previously unselected package bc. (Reading database ... 74877 files and directories currently installed.) Preparing to unpack .../archives/bc_1.07.1-3_arm64.deb ... Unpacking bc (1.07.1-3) ... Selecting previously unselected package pivccu-modules-raspberrypi. Preparing to unpack .../pivccu-modules-raspberrypi_2.0-19_all.deb ... dpkg-divert: warning: please specify --no-rename explicitly, the default will change to --rename in 1.20.x Adding 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack' Unpacking pivccu-modules-raspberrypi (2.0-19) ... Setting up bc (1.07.1-3) ... Setting up pivccu-modules-raspberrypi (2.0-19) ... Removing 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack' Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-rpi-modules.service → /lib/systemd/system/pivccu-rpi-modules.service. Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo bash -c 'cat << EOT >> /boot/firmware/config.txt dtoverlay=pi3-disable-bt EOT' sudo systemctl disable hciuart.service Removed "/etc/systemd/system/dev-serial1.device.wants/hciuart.service". daniel@RaspberryPi5:~ $ sudo sed -i /boot/firmware/cmdline.txt -e "s/console=serial0,[0-9]\+ //" sudo sed -i /boot/firmware/cmdline.txt -e "s/console=ttyAMA0,[0-9]\+ //" daniel@RaspberryPi5:~ $ sudo ip link show | cut -d' ' -f2 | cut -d: -f1 | grep -e '^e.*' eth0 daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5 sudo apt install bridge-utils sudo bash -c 'cat << EOT > /etc/network/interfaces source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 EOT' Reading package lists... Done Building dependency tree... Done Reading state information... Done Package 'dhcpcd5' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done Suggested packages: ifupdown The following NEW packages will be installed: bridge-utils 0 upgraded, 1 newly installed, 0 to remove and 77 not upgraded. Need to get 34.3 kB of archives. After this operation, 145 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian bookworm/main arm64 bridge-utils arm64 1.7.1-1 [34.3 kB] Fetched 34.3 kB in 0s (388 kB/s) Selecting previously unselected package bridge-utils. (Reading database ... 74901 files and directories currently installed.) Preparing to unpack .../bridge-utils_1.7.1-1_arm64.deb ... Unpacking bridge-utils (1.7.1-1) ... Setting up bridge-utils (1.7.1-1) ... Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5 sudo apt install bridge-utils sudo bash -c 'cat << EOT > /etc/network/interfaces source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet static bridge_ports eth0 address <address> netmask <netmask> gateway <gateway> dns-nameservers <dns1> <dns2> EOT' Reading package lists... Done Building dependency tree... Done Reading state information... Done Package 'dhcpcd5' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done bridge-utils is already the newest version (1.7.1-1). 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. daniel@RaspberryPi5:~ $ sudo reboot Broadcast message from root@RaspberryPi5 on pts/1 (Fri 2025-06-20 08:44:58 BST): The system will reboot now! daniel@RaspberryPi5:~ $ Connection to 192.168.178.45 closed by remote host. Connection to 192.168.178.45 closed. danielsmacbook:~ daniel$ ssh daniel@RaspberryPi5 ssh: connect to host raspberrypi5 port 22: Operation timed out danielsmacbook:~ daniel$ ssh 192.168.178.45 ssh: connect to host 192.168.178.45 port 22: Operation timed out danielsmacbook:~ daniel$@daniel-5 sagte in ioBroker startet nicht:
Nein für Raspi habe ich keine Tastatur oder Monitor.
Dann ändere das ;-)
im Moment blicke ich überhaupt nicht durchvwas du da tust.
da wird dhcp5 entfernt und wieder installiert?
@daniel-5 sagte in ioBroker startet nicht:
iface eth0 inet manual
konfigurierst du manuell?
@daniel-5 sagte in ioBroker startet nicht:
77 not upgraded.
warum kann ich nicht erkennen.
Was da jetzt Stand ist, wirst du nur am Raspi selbst sehen können
die .45 steht noch in der Fritzbox als aktiv?
sonst keine andere IP für den Raspi?
nochmal ein 2. mal neugestartet? -
.45 ist der Raspi. Hab jetzt die Anleitung von Alex aus Github genommen. Gleicher Fehler nach dem Reboot komm ich nicht mehr rein.
Nein für Raspi habe ich keine Tastatur oder Monitor.
daniel@RaspberryPi5:~ $ wget -q -O - https://apt.pivccu.de/piVCCU/public.key | sudo tee /usr/share/keyrings/pivccu.asc -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.4.14 (GNU/Linux) mQENBFJsL6IBCADMlaNsEi/CXNdYeacssVfjj+//N0VNjRdV+BIRB7WUvEZX6dS5 FNiJpJAohYmQWNz16jCI2uMuPOLsTl10K0CIUmfVtCeHQCe0w13AJMRJSA3/JoPJ ZBkZ05xY7Wqh3HTRy8hI7f6ZCtWjsmQvA9r3T6FUd6/5cBZxFCSI4llS6vDsREk6 G+05T78FNtfaxHfobYZI16qMzWevvNqjBn7rQZLn4TBNuvqnhshpoYZUnjCi1Yoz UjcReKhGNIC6kfeoFIoHy3fFKAQwknZnN6mXflGP5IVEH6jm790LZIDwrdGU8avf 97JloGWQXtd35psHaMPm02zffz3QozlmMtZBABEBAAG0NkFsZXhhbmRlciBSZWlu ZXJ0IChQYWNrYWdlIFNpZ25pbmcpIDxhbGV4QGFyZWluZXJ0LmRlPokBOAQTAQIA IgUCUmwvogIbAwYLCQgHAwIGFQgCCQoLBBYCAwECHgECF4AACgkQVBIwugXDi8QT FAf8DBGo1c00wWC2RwpFo414hGrEqlQTt8wWEwZJdPByO7i3ZNHvYpqjJr/8HR50 uyxg9Xomg2Gb03vD1xjdVPAZcTz2Jtfa6JiNmN1hC3Wxz0fUbwKcdEdhhXr8iRts 1EycRjjy4O3J2ty5kEjI5WCjnyGyqAxdIOPpocyzIIWBSBGHfy6fI9/35LNmZ2Tr 6XJJJfI7NXcrKzu48YEQxy4QdvpEI5ahwJmyFjVJjFM8HtFOVxliFOzMjzkvhiEo SwO2SQvo0o2MdBsl3OlzvwNm0z6ffh8/3uGk0WmwaFoeCRs+plkG2zy/GOS7YrSY DrpLTIThPQQV3A2rFFqRVYqZ8bkBDQRSbC+iAQgApIQ4HmDzQYwLgMrEgDVts/8S fIdKHxeZ0MSltbNbgUwptfeW+LhtWBJ6niZkV+7U7kSGEbZBGWqsybEHdGcG3S4N xlR9AoCEPRoiwbChy0nOOYCDySgfk35coP32+yzcAVvvCx/Tu8rdl4H+l00a23nl x3aiRPlWkrrDJg5GqAkIfTX9j/MCGDYJ4j5TCWT4FbGuEF+fExgko5cUzG8y/2Hz aHcEfC+Zt4P48Ir9MGwcImY45uHr8Z4UOaQ1WQBG8KAxKWmpqhik/8rLro91GnaA L0Hip+vgkT7+Y7iPbVxIp+hr7wnHt7WCiccUXMIpCvo93GLR9jcReIzCx0/gOQAR AQABiQEfBBgBAgAJBQJSbC+iAhsMAAoJEFQSMLoFw4vE0z8H/jQPJtfdh8s9AgWl hhzCsm0b8LmhYW4bmOrbN5PCI1qTfnP68GCAOFHYqnGSbJvMYp07Yfcx90KRYP4E yQxsVbnaiVj3d3teH8o7Nw8WaH+9XKsfg/vAyc7VRtr1UB0IvolGdeNeXjvJ3/PG AfsSY8CGlA6ClBhZ8+q5cUVJLCvy+4emvXTiwJ4XZp96bmBHkit9QFbrqSoIo3Vr gF0f4ZB/NFyL0VcZscH9yE4BXAqvs5uIGt8QQ03YrQJ2/JLzu/jUe0iEB3WWXxFm JDDElWaDoRMaZTSxJgzuRi9/xhMlNRS45CI38FpiCS9AWgmyBBq9xKI6BMLunRWj 4CUtOWQ= =jgj0 -----END PGP PUBLIC KEY BLOCK----- daniel@RaspberryPi5:~ $ echo "deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main" | sudo tee /etc/apt/sources.list.d/pivccu.list sudo apt update deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main Get:1 http://deb.debian.org/debian bookworm InRelease [151 kB] Get:2 http://archive.raspberrypi.com/debian bookworm InRelease [55.0 kB] Get:3 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Get:4 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] Get:5 https://apt.pivccu.de/piVCCU stable InRelease [13.6 kB] Get:6 http://deb.debian.org/debian bookworm/main armhf Packages [8,508 kB] Get:7 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [540 kB] Get:8 https://apt.pivccu.de/piVCCU stable/main armhf Packages [16.4 kB] Get:9 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [538 kB] Get:10 https://apt.pivccu.de/piVCCU stable/main arm64 Packages [16.5 kB] Get:11 http://deb.debian.org/debian bookworm/main arm64 Packages [8,693 kB] Get:12 http://deb.debian.org/debian bookworm/main Translation-en [6,109 kB] Get:13 http://deb.debian.org/debian bookworm/contrib arm64 Packages [45.7 kB] Get:14 http://deb.debian.org/debian bookworm/contrib Translation-en [48.4 kB] Get:15 http://deb.debian.org/debian bookworm/non-free armhf Packages [55.9 kB] Get:16 http://deb.debian.org/debian bookworm/non-free arm64 Packages [75.8 kB] Get:17 http://deb.debian.org/debian bookworm/non-free Translation-en [68.1 kB] Get:18 http://deb.debian.org/debian bookworm/non-free-firmware arm64 Packages [5,832 B] Get:19 http://deb.debian.org/debian bookworm/non-free-firmware Translation-en [20.9 kB] Get:20 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [248 kB] Get:21 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [263 kB] Get:22 http://deb.debian.org/debian-security bookworm-security/main Translation-en [160 kB] Get:23 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [756 B] Get:24 http://deb.debian.org/debian bookworm-updates/main armhf Packages [756 B] Get:25 http://deb.debian.org/debian bookworm-updates/main Translation-en [664 B] Fetched 25.7 MB in 4s (6,714 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 77 packages can be upgraded. Run 'apt list --upgradable' to see them. N: Repository 'http://deb.debian.org/debian bookworm InRelease' changed its 'Version' value from '12.10' to '12.11' daniel@RaspberryPi5:~ $ sudo apt install build-essential bison flex libssl-dev sudo apt install raspberrypi-kernel-headers pivccu-modules-dkms Reading package lists... Done Building dependency tree... Done Reading state information... Done build-essential is already the newest version (12.9). The following additional packages will be installed: libfl-dev libfl2 m4 Suggested packages: bison-doc flex-doc libssl-doc m4-doc The following NEW packages will be installed: bison flex libfl-dev libfl2 libssl-dev m4 0 upgraded, 6 newly installed, 0 to remove and 77 not upgraded. Need to get 5,453 kB of archives. After this operation, 18.7 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get:2 http://archive.raspberrypi.com/debian bookworm/main arm64 libssl-dev arm64 3.0.16-1~deb12u1+rpt1 [3,444 kB] Get:3 http://deb.debian.org/debian bookworm/main arm64 flex arm64 2.6.4-8.2 [411 kB] Get:4 http://deb.debian.org/debian bookworm/main arm64 bison arm64 2:3.8.2+dfsg-1+b1 [1,152 kB] Get:5 http://deb.debian.org/debian bookworm/main arm64 libfl2 arm64 2.6.4-8.2 [84.1 kB] Get:6 http://deb.debian.org/debian bookworm/main arm64 libfl-dev arm64 2.6.4-8.2 [85.3 kB] Fetched 5,453 kB in 1s (9,531 kB/s) Selecting previously unselected package m4. (Reading database ... 56180 files and directories currently installed.) Preparing to unpack .../0-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package flex. Preparing to unpack .../1-flex_2.6.4-8.2_arm64.deb ... Unpacking flex (2.6.4-8.2) ... Selecting previously unselected package bison. Preparing to unpack .../2-bison_2%3a3.8.2+dfsg-1+b1_arm64.deb ... Unpacking bison (2:3.8.2+dfsg-1+b1) ... Selecting previously unselected package libfl2:arm64. Preparing to unpack .../3-libfl2_2.6.4-8.2_arm64.deb ... Unpacking libfl2:arm64 (2.6.4-8.2) ... Selecting previously unselected package libfl-dev:arm64. Preparing to unpack .../4-libfl-dev_2.6.4-8.2_arm64.deb ... Unpacking libfl-dev:arm64 (2.6.4-8.2) ... Selecting previously unselected package libssl-dev:arm64. Preparing to unpack .../5-libssl-dev_3.0.16-1~deb12u1+rpt1_arm64.deb ... Unpacking libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ... Setting up m4 (1.4.19-3) ... Setting up libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ... Setting up libfl2:arm64 (2.6.4-8.2) ... Setting up bison (2:3.8.2+dfsg-1+b1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up flex (2.6.4-8.2) ... Setting up libfl-dev:arm64 (2.6.4-8.2) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u10) ... Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: dkms Suggested packages: menu The following NEW packages will be installed: dkms pivccu-modules-dkms raspberrypi-kernel-headers 0 upgraded, 3 newly installed, 0 to remove and 77 not upgraded. Need to get 10.3 MB of archives. After this operation, 65.0 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://archive.raspberrypi.com/debian bookworm/main arm64 raspberrypi-kernel-headers arm64 1:1.20230405-1 [10.2 MB] Get:2 http://deb.debian.org/debian bookworm/main arm64 dkms all 3.0.10-8+deb12u1 [48.7 kB] Get:3 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-dkms all 1.0.85 [43.2 kB] Fetched 10.3 MB in 1s (9,427 kB/s) Preconfiguring packages ... Selecting previously unselected package dkms. (Reading database ... 56756 files and directories currently installed.) Preparing to unpack .../dkms_3.0.10-8+deb12u1_all.deb ... Unpacking dkms (3.0.10-8+deb12u1) ... Setting up dkms (3.0.10-8+deb12u1) ... Selecting previously unselected package pivccu-modules-dkms. (Reading database ... 56780 files and directories currently installed.) Preparing to unpack .../pivccu-modules-dkms_1.0.85_all.deb ... Unpacking pivccu-modules-dkms (1.0.85) ... Selecting previously unselected package raspberrypi-kernel-headers. Preparing to unpack .../raspberrypi-kernel-headers_1%3a1.20230405-1_arm64.deb ... Unpacking raspberrypi-kernel-headers (1:1.20230405-1) ... Setting up raspberrypi-kernel-headers (1:1.20230405-1) ... run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21+ dkms: autoinstall for kernel 6.1.21+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7+ dkms: autoinstall for kernel 6.1.21-v7+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7l+ dkms: autoinstall for kernel 6.1.21-v7l+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v8+ dkms: running auto installation service for kernel 6.1.21-v8+. dkms: autoinstall for kernel: 6.1.21-v8+. Setting up pivccu-modules-dkms (1.0.85) ... Ensure non mixed processor architecure ... Done Create kernel modules ... Done Enable DKMS service ... Done Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo apt install pivccu-modules-raspberrypi Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: bc The following NEW packages will be installed: bc pivccu-modules-raspberrypi 0 upgraded, 2 newly installed, 0 to remove and 77 not upgraded. Need to get 110 kB of archives. After this operation, 242 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bookworm/main arm64 bc arm64 1.07.1-3 [107 kB] Get:2 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-raspberrypi all 2.0-19 [2,940 B] Fetched 110 kB in 0s (682 kB/s) Preconfiguring packages ... Selecting previously unselected package bc. (Reading database ... 74877 files and directories currently installed.) Preparing to unpack .../archives/bc_1.07.1-3_arm64.deb ... Unpacking bc (1.07.1-3) ... Selecting previously unselected package pivccu-modules-raspberrypi. Preparing to unpack .../pivccu-modules-raspberrypi_2.0-19_all.deb ... dpkg-divert: warning: please specify --no-rename explicitly, the default will change to --rename in 1.20.x Adding 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack' Unpacking pivccu-modules-raspberrypi (2.0-19) ... Setting up bc (1.07.1-3) ... Setting up pivccu-modules-raspberrypi (2.0-19) ... Removing 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack' Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-rpi-modules.service → /lib/systemd/system/pivccu-rpi-modules.service. Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo bash -c 'cat << EOT >> /boot/firmware/config.txt dtoverlay=pi3-disable-bt EOT' sudo systemctl disable hciuart.service Removed "/etc/systemd/system/dev-serial1.device.wants/hciuart.service". daniel@RaspberryPi5:~ $ sudo sed -i /boot/firmware/cmdline.txt -e "s/console=serial0,[0-9]\+ //" sudo sed -i /boot/firmware/cmdline.txt -e "s/console=ttyAMA0,[0-9]\+ //" daniel@RaspberryPi5:~ $ sudo ip link show | cut -d' ' -f2 | cut -d: -f1 | grep -e '^e.*' eth0 daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5 sudo apt install bridge-utils sudo bash -c 'cat << EOT > /etc/network/interfaces source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 EOT' Reading package lists... Done Building dependency tree... Done Reading state information... Done Package 'dhcpcd5' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done Suggested packages: ifupdown The following NEW packages will be installed: bridge-utils 0 upgraded, 1 newly installed, 0 to remove and 77 not upgraded. Need to get 34.3 kB of archives. After this operation, 145 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian bookworm/main arm64 bridge-utils arm64 1.7.1-1 [34.3 kB] Fetched 34.3 kB in 0s (388 kB/s) Selecting previously unselected package bridge-utils. (Reading database ... 74901 files and directories currently installed.) Preparing to unpack .../bridge-utils_1.7.1-1_arm64.deb ... Unpacking bridge-utils (1.7.1-1) ... Setting up bridge-utils (1.7.1-1) ... Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5 sudo apt install bridge-utils sudo bash -c 'cat << EOT > /etc/network/interfaces source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet static bridge_ports eth0 address <address> netmask <netmask> gateway <gateway> dns-nameservers <dns1> <dns2> EOT' Reading package lists... Done Building dependency tree... Done Reading state information... Done Package 'dhcpcd5' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done bridge-utils is already the newest version (1.7.1-1). 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. daniel@RaspberryPi5:~ $ sudo reboot Broadcast message from root@RaspberryPi5 on pts/1 (Fri 2025-06-20 08:44:58 BST): The system will reboot now! daniel@RaspberryPi5:~ $ Connection to 192.168.178.45 closed by remote host. Connection to 192.168.178.45 closed. danielsmacbook:~ daniel$ ssh daniel@RaspberryPi5 ssh: connect to host raspberrypi5 port 22: Operation timed out danielsmacbook:~ daniel$ ssh 192.168.178.45 ssh: connect to host 192.168.178.45 port 22: Operation timed out danielsmacbook:~ daniel$@daniel-5 sagte in ioBroker startet nicht:
Also kein 'ioBroker startet nicht' sondern ein 'piVCCU fummelt an den Netzwerkinterfaces herum'-Problem.
Frag dann doch bitte dort nach.Grundsätzlich updated man sein System aber auch auf den letzten Stand, bevor man weiteres Zeug installiert.
0 upgraded, 1 newly installed, 0 to remove and 77 not upgraded.
Da müssen zunächst die 77 anderen Updates (ist bestimmt auch ein Kernel-Update dabei) eingespielt werden.
-
.45 ist der Raspi. Hab jetzt die Anleitung von Alex aus Github genommen. Gleicher Fehler nach dem Reboot komm ich nicht mehr rein.
Nein für Raspi habe ich keine Tastatur oder Monitor.
daniel@RaspberryPi5:~ $ wget -q -O - https://apt.pivccu.de/piVCCU/public.key | sudo tee /usr/share/keyrings/pivccu.asc -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.4.14 (GNU/Linux) mQENBFJsL6IBCADMlaNsEi/CXNdYeacssVfjj+//N0VNjRdV+BIRB7WUvEZX6dS5 FNiJpJAohYmQWNz16jCI2uMuPOLsTl10K0CIUmfVtCeHQCe0w13AJMRJSA3/JoPJ ZBkZ05xY7Wqh3HTRy8hI7f6ZCtWjsmQvA9r3T6FUd6/5cBZxFCSI4llS6vDsREk6 G+05T78FNtfaxHfobYZI16qMzWevvNqjBn7rQZLn4TBNuvqnhshpoYZUnjCi1Yoz UjcReKhGNIC6kfeoFIoHy3fFKAQwknZnN6mXflGP5IVEH6jm790LZIDwrdGU8avf 97JloGWQXtd35psHaMPm02zffz3QozlmMtZBABEBAAG0NkFsZXhhbmRlciBSZWlu ZXJ0IChQYWNrYWdlIFNpZ25pbmcpIDxhbGV4QGFyZWluZXJ0LmRlPokBOAQTAQIA IgUCUmwvogIbAwYLCQgHAwIGFQgCCQoLBBYCAwECHgECF4AACgkQVBIwugXDi8QT FAf8DBGo1c00wWC2RwpFo414hGrEqlQTt8wWEwZJdPByO7i3ZNHvYpqjJr/8HR50 uyxg9Xomg2Gb03vD1xjdVPAZcTz2Jtfa6JiNmN1hC3Wxz0fUbwKcdEdhhXr8iRts 1EycRjjy4O3J2ty5kEjI5WCjnyGyqAxdIOPpocyzIIWBSBGHfy6fI9/35LNmZ2Tr 6XJJJfI7NXcrKzu48YEQxy4QdvpEI5ahwJmyFjVJjFM8HtFOVxliFOzMjzkvhiEo SwO2SQvo0o2MdBsl3OlzvwNm0z6ffh8/3uGk0WmwaFoeCRs+plkG2zy/GOS7YrSY DrpLTIThPQQV3A2rFFqRVYqZ8bkBDQRSbC+iAQgApIQ4HmDzQYwLgMrEgDVts/8S fIdKHxeZ0MSltbNbgUwptfeW+LhtWBJ6niZkV+7U7kSGEbZBGWqsybEHdGcG3S4N xlR9AoCEPRoiwbChy0nOOYCDySgfk35coP32+yzcAVvvCx/Tu8rdl4H+l00a23nl x3aiRPlWkrrDJg5GqAkIfTX9j/MCGDYJ4j5TCWT4FbGuEF+fExgko5cUzG8y/2Hz aHcEfC+Zt4P48Ir9MGwcImY45uHr8Z4UOaQ1WQBG8KAxKWmpqhik/8rLro91GnaA L0Hip+vgkT7+Y7iPbVxIp+hr7wnHt7WCiccUXMIpCvo93GLR9jcReIzCx0/gOQAR AQABiQEfBBgBAgAJBQJSbC+iAhsMAAoJEFQSMLoFw4vE0z8H/jQPJtfdh8s9AgWl hhzCsm0b8LmhYW4bmOrbN5PCI1qTfnP68GCAOFHYqnGSbJvMYp07Yfcx90KRYP4E yQxsVbnaiVj3d3teH8o7Nw8WaH+9XKsfg/vAyc7VRtr1UB0IvolGdeNeXjvJ3/PG AfsSY8CGlA6ClBhZ8+q5cUVJLCvy+4emvXTiwJ4XZp96bmBHkit9QFbrqSoIo3Vr gF0f4ZB/NFyL0VcZscH9yE4BXAqvs5uIGt8QQ03YrQJ2/JLzu/jUe0iEB3WWXxFm JDDElWaDoRMaZTSxJgzuRi9/xhMlNRS45CI38FpiCS9AWgmyBBq9xKI6BMLunRWj 4CUtOWQ= =jgj0 -----END PGP PUBLIC KEY BLOCK----- daniel@RaspberryPi5:~ $ echo "deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main" | sudo tee /etc/apt/sources.list.d/pivccu.list sudo apt update deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main Get:1 http://deb.debian.org/debian bookworm InRelease [151 kB] Get:2 http://archive.raspberrypi.com/debian bookworm InRelease [55.0 kB] Get:3 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Get:4 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] Get:5 https://apt.pivccu.de/piVCCU stable InRelease [13.6 kB] Get:6 http://deb.debian.org/debian bookworm/main armhf Packages [8,508 kB] Get:7 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [540 kB] Get:8 https://apt.pivccu.de/piVCCU stable/main armhf Packages [16.4 kB] Get:9 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [538 kB] Get:10 https://apt.pivccu.de/piVCCU stable/main arm64 Packages [16.5 kB] Get:11 http://deb.debian.org/debian bookworm/main arm64 Packages [8,693 kB] Get:12 http://deb.debian.org/debian bookworm/main Translation-en [6,109 kB] Get:13 http://deb.debian.org/debian bookworm/contrib arm64 Packages [45.7 kB] Get:14 http://deb.debian.org/debian bookworm/contrib Translation-en [48.4 kB] Get:15 http://deb.debian.org/debian bookworm/non-free armhf Packages [55.9 kB] Get:16 http://deb.debian.org/debian bookworm/non-free arm64 Packages [75.8 kB] Get:17 http://deb.debian.org/debian bookworm/non-free Translation-en [68.1 kB] Get:18 http://deb.debian.org/debian bookworm/non-free-firmware arm64 Packages [5,832 B] Get:19 http://deb.debian.org/debian bookworm/non-free-firmware Translation-en [20.9 kB] Get:20 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [248 kB] Get:21 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [263 kB] Get:22 http://deb.debian.org/debian-security bookworm-security/main Translation-en [160 kB] Get:23 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [756 B] Get:24 http://deb.debian.org/debian bookworm-updates/main armhf Packages [756 B] Get:25 http://deb.debian.org/debian bookworm-updates/main Translation-en [664 B] Fetched 25.7 MB in 4s (6,714 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 77 packages can be upgraded. Run 'apt list --upgradable' to see them. N: Repository 'http://deb.debian.org/debian bookworm InRelease' changed its 'Version' value from '12.10' to '12.11' daniel@RaspberryPi5:~ $ sudo apt install build-essential bison flex libssl-dev sudo apt install raspberrypi-kernel-headers pivccu-modules-dkms Reading package lists... Done Building dependency tree... Done Reading state information... Done build-essential is already the newest version (12.9). The following additional packages will be installed: libfl-dev libfl2 m4 Suggested packages: bison-doc flex-doc libssl-doc m4-doc The following NEW packages will be installed: bison flex libfl-dev libfl2 libssl-dev m4 0 upgraded, 6 newly installed, 0 to remove and 77 not upgraded. Need to get 5,453 kB of archives. After this operation, 18.7 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get:2 http://archive.raspberrypi.com/debian bookworm/main arm64 libssl-dev arm64 3.0.16-1~deb12u1+rpt1 [3,444 kB] Get:3 http://deb.debian.org/debian bookworm/main arm64 flex arm64 2.6.4-8.2 [411 kB] Get:4 http://deb.debian.org/debian bookworm/main arm64 bison arm64 2:3.8.2+dfsg-1+b1 [1,152 kB] Get:5 http://deb.debian.org/debian bookworm/main arm64 libfl2 arm64 2.6.4-8.2 [84.1 kB] Get:6 http://deb.debian.org/debian bookworm/main arm64 libfl-dev arm64 2.6.4-8.2 [85.3 kB] Fetched 5,453 kB in 1s (9,531 kB/s) Selecting previously unselected package m4. (Reading database ... 56180 files and directories currently installed.) Preparing to unpack .../0-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package flex. Preparing to unpack .../1-flex_2.6.4-8.2_arm64.deb ... Unpacking flex (2.6.4-8.2) ... Selecting previously unselected package bison. Preparing to unpack .../2-bison_2%3a3.8.2+dfsg-1+b1_arm64.deb ... Unpacking bison (2:3.8.2+dfsg-1+b1) ... Selecting previously unselected package libfl2:arm64. Preparing to unpack .../3-libfl2_2.6.4-8.2_arm64.deb ... Unpacking libfl2:arm64 (2.6.4-8.2) ... Selecting previously unselected package libfl-dev:arm64. Preparing to unpack .../4-libfl-dev_2.6.4-8.2_arm64.deb ... Unpacking libfl-dev:arm64 (2.6.4-8.2) ... Selecting previously unselected package libssl-dev:arm64. Preparing to unpack .../5-libssl-dev_3.0.16-1~deb12u1+rpt1_arm64.deb ... Unpacking libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ... Setting up m4 (1.4.19-3) ... Setting up libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ... Setting up libfl2:arm64 (2.6.4-8.2) ... Setting up bison (2:3.8.2+dfsg-1+b1) ... update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode Setting up flex (2.6.4-8.2) ... Setting up libfl-dev:arm64 (2.6.4-8.2) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9+rpt2+deb12u10) ... Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: dkms Suggested packages: menu The following NEW packages will be installed: dkms pivccu-modules-dkms raspberrypi-kernel-headers 0 upgraded, 3 newly installed, 0 to remove and 77 not upgraded. Need to get 10.3 MB of archives. After this operation, 65.0 MB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://archive.raspberrypi.com/debian bookworm/main arm64 raspberrypi-kernel-headers arm64 1:1.20230405-1 [10.2 MB] Get:2 http://deb.debian.org/debian bookworm/main arm64 dkms all 3.0.10-8+deb12u1 [48.7 kB] Get:3 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-dkms all 1.0.85 [43.2 kB] Fetched 10.3 MB in 1s (9,427 kB/s) Preconfiguring packages ... Selecting previously unselected package dkms. (Reading database ... 56756 files and directories currently installed.) Preparing to unpack .../dkms_3.0.10-8+deb12u1_all.deb ... Unpacking dkms (3.0.10-8+deb12u1) ... Setting up dkms (3.0.10-8+deb12u1) ... Selecting previously unselected package pivccu-modules-dkms. (Reading database ... 56780 files and directories currently installed.) Preparing to unpack .../pivccu-modules-dkms_1.0.85_all.deb ... Unpacking pivccu-modules-dkms (1.0.85) ... Selecting previously unselected package raspberrypi-kernel-headers. Preparing to unpack .../raspberrypi-kernel-headers_1%3a1.20230405-1_arm64.deb ... Unpacking raspberrypi-kernel-headers (1:1.20230405-1) ... Setting up raspberrypi-kernel-headers (1:1.20230405-1) ... run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21+ dkms: autoinstall for kernel 6.1.21+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7+ dkms: autoinstall for kernel 6.1.21-v7+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7l+ dkms: autoinstall for kernel 6.1.21-v7l+ was skipped since the kernel headers for this kernel do not seem to be installed. run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v8+ dkms: running auto installation service for kernel 6.1.21-v8+. dkms: autoinstall for kernel: 6.1.21-v8+. Setting up pivccu-modules-dkms (1.0.85) ... Ensure non mixed processor architecure ... Done Create kernel modules ... Done Enable DKMS service ... Done Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo apt install pivccu-modules-raspberrypi Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: bc The following NEW packages will be installed: bc pivccu-modules-raspberrypi 0 upgraded, 2 newly installed, 0 to remove and 77 not upgraded. Need to get 110 kB of archives. After this operation, 242 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://deb.debian.org/debian bookworm/main arm64 bc arm64 1.07.1-3 [107 kB] Get:2 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-raspberrypi all 2.0-19 [2,940 B] Fetched 110 kB in 0s (682 kB/s) Preconfiguring packages ... Selecting previously unselected package bc. (Reading database ... 74877 files and directories currently installed.) Preparing to unpack .../archives/bc_1.07.1-3_arm64.deb ... Unpacking bc (1.07.1-3) ... Selecting previously unselected package pivccu-modules-raspberrypi. Preparing to unpack .../pivccu-modules-raspberrypi_2.0-19_all.deb ... dpkg-divert: warning: please specify --no-rename explicitly, the default will change to --rename in 1.20.x Adding 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack' Unpacking pivccu-modules-raspberrypi (2.0-19) ... Setting up bc (1.07.1-3) ... Setting up pivccu-modules-raspberrypi (2.0-19) ... Removing 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack' Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-rpi-modules.service → /lib/systemd/system/pivccu-rpi-modules.service. Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo bash -c 'cat << EOT >> /boot/firmware/config.txt dtoverlay=pi3-disable-bt EOT' sudo systemctl disable hciuart.service Removed "/etc/systemd/system/dev-serial1.device.wants/hciuart.service". daniel@RaspberryPi5:~ $ sudo sed -i /boot/firmware/cmdline.txt -e "s/console=serial0,[0-9]\+ //" sudo sed -i /boot/firmware/cmdline.txt -e "s/console=ttyAMA0,[0-9]\+ //" daniel@RaspberryPi5:~ $ sudo ip link show | cut -d' ' -f2 | cut -d: -f1 | grep -e '^e.*' eth0 daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5 sudo apt install bridge-utils sudo bash -c 'cat << EOT > /etc/network/interfaces source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet dhcp bridge_ports eth0 EOT' Reading package lists... Done Building dependency tree... Done Reading state information... Done Package 'dhcpcd5' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done Suggested packages: ifupdown The following NEW packages will be installed: bridge-utils 0 upgraded, 1 newly installed, 0 to remove and 77 not upgraded. Need to get 34.3 kB of archives. After this operation, 145 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian bookworm/main arm64 bridge-utils arm64 1.7.1-1 [34.3 kB] Fetched 34.3 kB in 0s (388 kB/s) Selecting previously unselected package bridge-utils. (Reading database ... 74901 files and directories currently installed.) Preparing to unpack .../bridge-utils_1.7.1-1_arm64.deb ... Unpacking bridge-utils (1.7.1-1) ... Setting up bridge-utils (1.7.1-1) ... Processing triggers for man-db (2.11.2-2) ... daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5 sudo apt install bridge-utils sudo bash -c 'cat << EOT > /etc/network/interfaces source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual auto br0 iface br0 inet static bridge_ports eth0 address <address> netmask <netmask> gateway <gateway> dns-nameservers <dns1> <dns2> EOT' Reading package lists... Done Building dependency tree... Done Reading state information... Done Package 'dhcpcd5' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. Reading package lists... Done Building dependency tree... Done Reading state information... Done bridge-utils is already the newest version (1.7.1-1). 0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded. daniel@RaspberryPi5:~ $ sudo reboot Broadcast message from root@RaspberryPi5 on pts/1 (Fri 2025-06-20 08:44:58 BST): The system will reboot now! daniel@RaspberryPi5:~ $ Connection to 192.168.178.45 closed by remote host. Connection to 192.168.178.45 closed. danielsmacbook:~ daniel$ ssh daniel@RaspberryPi5 ssh: connect to host raspberrypi5 port 22: Operation timed out danielsmacbook:~ daniel$ ssh 192.168.178.45 ssh: connect to host 192.168.178.45 port 22: Operation timed out danielsmacbook:~ daniel$Und ich würde mal schauen, ob nicht Debmatic der bessere Ansatz gegenüber piVCCU ist.
Der muss jedenfalls keine bridge-Interfaces anlegen, das läuft ohne Container direkt auf einem Debian.
Support us
756
Online32.5k
Benutzer81.6k
Themen1.3m
Beiträge