ioBroker startet nicht

Daniel 5

Hallo zusammen,

ich hoffe ihr könnt mir helfen, bevor ich alles neu installieren muss. Alles an "Programmierung" mit dem System habe ich mir selbst beigebracht und würde mich eher als Laie bezeichnen.

Bei dem letzten Gewitter kam es bei uns zum Stromausfall und mein Raspi hatte sich aufgehangen. Nach mehreren Neustarts, lief glücklicherweise wieder alles.
Hab dies aber direkt zum Anlass genommen, node, npm etc. auf den neusten Stand zu bringen.

Nach dem Neustart trat in meinen Augen der selbe Fehler wie auch jetzt auf - ioBroker ist über die IP Adresse nicht erreichbar. Nach mehreren Neustarts war dann Urplötzlich wieder alles da.

Dies klappt jetzt allerdings leider nicht. iob fix läuft soweit ich das sehe durch. Die installierte pivccu ist ebenfalls erreichbar.

Die aktuelle iob Diag hänge ich mal an.


========== Start marking the full check here ===========

```bash
Script v.2025-03-08

*** BASE SYSTEM ***
 Static hostname: RaspberryPi5
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.12.25+rpt-rpi-2712
    Architecture: arm64
OS is similar to: 

Model		: Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 17:07:07 up 5 min,  2 users,  load average: 0.73, 0.43, 0.22
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Thu 2025-06-19 17:07:07 CEST
           Universal time: Thu 2025-06-19 15:07:07 UTC
                 RTC time: Thu 2025-06-19 15:07:08
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
daniel
HOME=/home/daniel
GROUPS=daniel adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop: 	
Terminal: 	tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        653M        7.5G        5.9M        418M        7.8G
Swap:           209M          0B        209M
Total:          8.7G        653M        7.7G

Active iob-Instances: 	0

         8063 M total memory
          622 M used memory
          533 M active memory
          186 M inactive memory
         7119 M free memory
           46 M buffer memory
          353 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 17:07:08 up 5 min,  2 users,  load average: 0.73, 0.43, 0.22
Tasks: 203 total,   1 running, 202 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni, 86.7 id, 13.3 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   8063.7 total,   7119.2 free,    623.0 used,    400.3 buff/cache     
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   7440.7 avail Mem 

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     807M  5.5M  801M   1% /run
/dev/mmcblk0p2 ext4       57G  6.4G   48G  12% /
tmpfs          tmpfs     4.0G     0  4.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   68M  443M  14% /boot/firmware
tmpfs          tmpfs     807M     0  807M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Jun 19 17:01:47 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave  numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:79:99:7E vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=7a10825e-02 rootfstype=ext4 fsck.repair=yes rootwait
[Thu Jun 19 17:01:51 2025] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none.
[Thu Jun 19 17:01:55 2025] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.3G	/var/
863M	/var/lib
677M	/var/lib/piVCCU3
657M	/var/cache
651M	/var/cache/apt

Archived and active journals take up 570.5M in the file system.

/opt/iobroker/backups:
37M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
169M	/opt/iobroker/iobroker-data/
118M	/opt/iobroker/iobroker-data/files
47M	/opt/iobroker/iobroker-data/files/admin.admin
46M	/opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M	/opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
8.1M	/opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BFvcOIQE.js
6.7M	/opt/iobroker/iobroker-data/objects.jsonl
4.7M	/opt/iobroker/iobroker-data/files/yahka.admin/yahka.admin.js.map
4.6M	/opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js
4.1M	/opt/iobroker/iobroker-data/files/yahka.admin/yahka.admin.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs 	v20.19.2
/usr/bin/node 		v20.19.2
/usr/bin/npm 		10.8.2
/usr/bin/npx 		10.8.2
/usr/bin/corepack 	0.31.0

nodejs:
  Installed: 20.19.2-1nodesource1
  Candidate: 20.19.2-1nodesource1
  Version table:
 *** 20.19.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.19.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.3-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
/opt/iobroker/node_modules/ioredis/built/command.js:1
"use strict";ObJect&devinePropeR4y(expovts, "_esModUle", { valq�: t2ue });
             ^

SyntaxError: Invalid or unexpected token
    at wrapSafe (node:internal/modules/cjs/loader:1472:18)
    at Module._compile (node:internal/modules/cjs/loader:1501:20)
    at Module._extensions..js (node:internal/modules/cjs/loader:1613:10)
    at Module.load (node:internal/modules/cjs/loader:1275:32)
    at Module._load (node:internal/modules/cjs/loader:1096:12)
    at Module.require (node:internal/modules/cjs/loader:1298:19)
    at require (node:internal/modules/helpers:182:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/index.js:7:19)
    at Module._compile (node:internal/modules/cjs/loader:1529:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1613:10)
Installation broken or unknown objects type: jsonl configured

Hosts:
/opt/iobroker/node_modules/ioredis/built/command.js:1
"use strict";ObJect&devinePropeR4y(expovts, "_esModUle", { valq�: t2ue });
             ^

SyntaxError: Invalid or unexpected token
    at wrapSafe (node:internal/modules/cjs/loader:1472:18)
    at Module._compile (node:internal/modules/cjs/loader:1501:20)
    at Module._extensions..js (node:internal/modules/cjs/loader:1613:10)
    at Module.load (node:internal/modules/cjs/loader:1275:32)
    at Module._load (node:internal/modules/cjs/loader:1096:12)
    at Module.require (node:internal/modules/cjs/loader:1298:19)
    at require (node:internal/modules/helpers:182:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/index.js:7:19)
    at Module._compile (node:internal/modules/cjs/loader:1529:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1613:10)
Installation broken or unknown objects type: jsonl configured

Core adapters versions
js-controller: 	7.0.6
admin: 		7.6.17
javascript: 	8.9.2

nodejs modules from github: 	0

Adapter State


Enabled adapters with bindings

ioBroker-Repositories
/opt/iobroker/node_modules/ioredis/built/command.js:1
"use strict";ObJect&devinePropeR4y(expovts, "_esModUle", { valq�: t2ue });
             ^

SyntaxError: Invalid or unexpected token
    at wrapSafe (node:internal/modules/cjs/loader:1472:18)
    at Module._compile (node:internal/modules/cjs/loader:1501:20)
    at Module._extensions..js (node:internal/modules/cjs/loader:1613:10)
    at Module.load (node:internal/modules/cjs/loader:1275:32)
    at Module._load (node:internal/modules/cjs/loader:1096:12)
    at Module.require (node:internal/modules/cjs/loader:1298:19)
    at require (node:internal/modules/helpers:182:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/index.js:7:19)
    at Module._compile (node:internal/modules/cjs/loader:1529:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1613:10)
Installation broken or unknown objects type: jsonl configured

Installed ioBroker-Adapters
/opt/iobroker/node_modules/ioredis/built/command.js:1
"use strict";ObJect&devinePropeR4y(expovts, "_esModUle", { valq�: t2ue });
             ^

SyntaxError: Invalid or unexpected token
    at wrapSafe (node:internal/modules/cjs/loader:1472:18)
    at Module._compile (node:internal/modules/cjs/loader:1501:20)
    at Module._extensions..js (node:internal/modules/cjs/loader:1613:10)
    at Module.load (node:internal/modules/cjs/loader:1275:32)
    at Module._load (node:internal/modules/cjs/loader:1096:12)
    at Module.require (node:internal/modules/cjs/loader:1298:19)
    at require (node:internal/modules/helpers:182:18)
    at Object.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/index.js:7:19)
    at Module._compile (node:internal/modules/cjs/loader:1529:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1613:10)
Installation broken or unknown objects type: jsonl configured

Objects and States
Please stand by - This may take a while
Objects: 	0
States: 	0

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:6 https://apt.pivccu.de/piVCCU stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          7267       1054/sshd: /usr/sbi 
tcp        0      0 10.0.3.1:53             0.0.0.0:*               LISTEN      0          1877       1185/dnsmasq        
tcp6       0      0 :::22                   :::*                    LISTEN      0          7269       1054/sshd: /usr/sbi 
udp        0      0 0.0.0.0:50254           0.0.0.0:*                           104        5804       713/avahi-daemon: r 
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        5802       713/avahi-daemon: r 
udp        0      0 10.0.3.1:53             0.0.0.0:*                           0          1876       1185/dnsmasq        
udp        0      0 0.0.0.0:67              0.0.0.0:*                           0          1873       1185/dnsmasq        
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          1793       976/dhclient        
udp6       0      0 :::5353                 :::*                                104        5803       713/avahi-daemon: r 
udp6       0      0 :::35163                :::*                                104        5805       713/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2025-06-19 15:10:12.871  - info: history.0 (1934) terminating
2025-06-19 15:10:12.880  - info: history.0 (1934) Terminated (NO_ERROR): Without reason
2025-06-19 15:10:12.890  - info: hm-rpc.0 (8549) terminating
2025-06-19 15:10:12.891  - info: hm-rpc.0 (8549) Terminated (NO_ERROR): Without reason
2025-06-19 15:10:12.892  - info: yahka.0 (8610) terminating
2025-06-19 15:10:12.893  - info: yahka.0 (8610) Terminated (NO_ERROR): Without reason
2025-06-19 15:10:12.898  - info: hm-rega.0 (8533) terminating
2025-06-19 15:10:12.899  - info: hm-rega.0 (8533) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-06-19 15:10:13.320  - info: backitup.0 (2092) terminating
2025-06-19 15:10:13.328  - info: yahka.0 (8610) terminating
2025-06-19 15:10:13.339  - info: javascript.0 (4418) terminating
2025-06-19 15:10:13.342  - info: hm-rega.0 (8533) terminating
2025-06-19 15:10:13.345  - info: admin.0 (1905) terminating
2025-06-19 15:10:13.352  - info: web.0 (2290) terminating
2025-06-19 15:10:13.352  - info: web.0 (2290) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-06-19 15:10:13.379  - info: host.RaspberryPi5 instance system.adapter.javascript.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-06-19 15:10:13.392  - info: host.RaspberryPi5 instance system.adapter.admin.0 terminated with code 0 (NO_ERROR)
2025-06-19 15:10:13.447  - info: host.RaspberryPi5 instance system.adapter.history.0 terminated with code 0 (NO_ERROR)
2025-06-19 15:10:13.447  - info: host.RaspberryPi5 instance system.adapter.hm-rpc.0 terminated with code 0 (NO_ERROR)
2025-06-19 15:10:13.462  - info: host.RaspberryPi5 instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR)
2025-06-19 15:10:13.463  - info: host.RaspberryPi5 instance system.adapter.yahka.0 terminated with code 0 (NO_ERROR)
2025-06-19 15:10:13.470  - info: host.RaspberryPi5 instance system.adapter.hm-rega.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-06-19 15:10:13.871  - info: host.RaspberryPi5 instance system.adapter.web.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-06-19 15:10:13.871  - info: host.RaspberryPi5 All instances are stopped.
2025-06-19 15:10:14.023  - info: host.RaspberryPi5 terminated

============ Mark until here for C&P =============

iob diag has finished.

daniel@RaspberryPi5:~ $

Homoran

@daniel-5 sagte in ioBroker startet nicht:

Bei dem letzten Gewitter kam es bei uns zum Stromausfall und mein Raspi hatte sich aufgehangen

dabei kann es zur Zerstörung des Dateisystems kommen.

Sehe aktuell aber nichts in den Meldungen davon. Das kann aber auch daran liegen, dass du nach

@daniel-5 sagte in ioBroker startet nicht:

mehreren Neustarts,

die Reparaturversuche des OS nicht mehr siehst.

Allerdings dind solch kryptischen Zeichen

@daniel-5 sagte in ioBroker startet nicht:

use strict";ObJect&devinePropeR4y(expovts, "_esModUle", { valq�: t2ue });

oft ein Hinweis von defekten Dateien.

Hast du ein aktuelles Backup von vor dem Gewitter?

Wahrscheinlich ist deine
@daniel-5 sagte in ioBroker startet nicht:

Installation broken

Daniel 5

@homoran das wäre genau mein Problem. Das Backup liegt mir nur für PivCCu vor. Heißt ich müsste alles neu von Hand eingeben und das dauert :)

Ich hatte jetzt die Hoffnung, es sieht jemand den Fehlercode und der lässt sich mit einem "fix" beheben.

Homoran

@daniel-5 sagte in ioBroker startet nicht:

es sieht jemand den Fehlercode

es gibt keinen Fehlercode.

Das Dateisystem (und ggf. deine SD Karte) hat einen Schaden.
Durch das intensive Neustarten und die nachgeholten Updates haven wahrscheinlich ihr übriges dazu beigetragen.

Thomas Braun

@daniel-5

Versuch mal

cd /opt/iobroker
iob stop
sudo -H -u iobroker npm install iobroker.js-controller@7.0.6 --omit=dev
iob start

Daniel 5

@thomas-braun & @Homoran

Danke für eure schnellen Antworten. Jetzt war ich leider zu schnell und installiere gerade neu :(

Homoran

@daniel-5 sagte in ioBroker startet nicht:

installiere gerade neu

auf derselben Karte??

Thomas Braun

@daniel-5

Dann richte jetzt den Backitup-Adapter für den ioBroker ein...

Daniel 5

@homoran ja - aber mit vollständiger Formatierung

Daniel 5

@thomas-braun der war tatsächlich auch vorher schon eingerichtet, allerdings konnte ich die Dateien nicht abrufen

Homoran

@daniel-5 sagte in ioBroker startet nicht:

@homoran ja - aber mit vollständiger Formatierung

macht man beides nicht ;-)

Wenn die Karte einen Schuss weg hat, ist das eine Zeitbombe.
Formatierung hoffentlich mit SD-Card Formatter und nicht mit PC-Bordmitteln.

Bei einer neuen Karte hättest du die alte noch als Hardware-Backup gehabt.

Homoran

@daniel-5 sagte in ioBroker startet nicht:

allerdings konnte ich die Dateien nicht abrufen

waren die auf der Karte?
oder "auswärts"?

Daniel 5

@homoran die waren auf der Karte und auf meinem Mac. Eigentlich in der Cloud. Aber da ist lediglich nur noch das Homematic Backup.

Wo ich euch aber beide gerade hier habe: Habt ihr folgenden Fehler schonmal gehabt? Im Netz finde ich leider nichts hilfreiches. Dies tritt jetzt während der Vorbereitung (Funkmodul etc. aktivieren) der pivccu nach dem Neustart auf, bevor das eigentliche Programm installiert werden soll.

danielsmacbook:~ daniel$ ssh 192.168.178.45
ssh: connect to host 192.168.178.45 port 22: No route to host
danielsmacbook:~ daniel$ ssh daniel@192.168.178.45
ssh: connect to host 192.168.178.45 port 22: Operation timed out

Homoran

@daniel-5 sagte in ioBroker startet nicht:

No route to host

da hast du Netzwerkprobleme.
gibt es die .45 überhaupt?

Thomas Braun

@daniel-5

Lebt der host unter der IP?
ProTipp: Verwende hostnames, IPs sind aus dem letzten Jahrtausend...

Daniel 5

@thomas-braun Bis zu dem Neustart lebt er unter der IP. Nach dem Neustart ist er ebenfalls im Router unter der gleichen IP sichtbar.

Übers Terminal ist er dann aber schon nicht mehr erreichbar und nach x Minuten (ca. 30 geschätzt) geht er dann komplett auch im Router offline.

Installiere ich wieder komplett neu, funktioniert er wieder bis zum oben genannten Step.

Homoran

@daniel-5 sagte in ioBroker startet nicht:

funktioniert er wieder bis zum oben genannten Step.

...und der wäre?

Daniel 5

@homoran ich installiere nach dieser Anleitung. Hat bei den letzen Malen auch hervorragend funktioniert.

https://www.electronicstudio.de/homematic-ccu-pivccu-installieren

Der Fehler tritt nach Punkt 3 und dem Reboot auf.

Homoran

@daniel-5 Warum zeigst du nichts?
Die Anleitung nutzt nichts. Da steht nicht was bei dir passiert
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

warum nicht die Anleitung von Alex aus der piVCCU Seite bei Github?

nochmal: wer ist .45?

Hast du Tastatur und Monitor am Pi?
Was sagt sudo pivccu info ?

bitte mehr Informationen!

Daniel 5

@homoran

.45 ist der Raspi. Hab jetzt die Anleitung von Alex aus Github genommen. Gleicher Fehler nach dem Reboot komm ich nicht mehr rein.

Nein für Raspi habe ich keine Tastatur oder Monitor.

daniel@RaspberryPi5:~ $ wget -q -O - https://apt.pivccu.de/piVCCU/public.key | sudo tee /usr/share/keyrings/pivccu.asc
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.14 (GNU/Linux)

mQENBFJsL6IBCADMlaNsEi/CXNdYeacssVfjj+//N0VNjRdV+BIRB7WUvEZX6dS5
FNiJpJAohYmQWNz16jCI2uMuPOLsTl10K0CIUmfVtCeHQCe0w13AJMRJSA3/JoPJ
ZBkZ05xY7Wqh3HTRy8hI7f6ZCtWjsmQvA9r3T6FUd6/5cBZxFCSI4llS6vDsREk6
G+05T78FNtfaxHfobYZI16qMzWevvNqjBn7rQZLn4TBNuvqnhshpoYZUnjCi1Yoz
UjcReKhGNIC6kfeoFIoHy3fFKAQwknZnN6mXflGP5IVEH6jm790LZIDwrdGU8avf
97JloGWQXtd35psHaMPm02zffz3QozlmMtZBABEBAAG0NkFsZXhhbmRlciBSZWlu
ZXJ0IChQYWNrYWdlIFNpZ25pbmcpIDxhbGV4QGFyZWluZXJ0LmRlPokBOAQTAQIA
IgUCUmwvogIbAwYLCQgHAwIGFQgCCQoLBBYCAwECHgECF4AACgkQVBIwugXDi8QT
FAf8DBGo1c00wWC2RwpFo414hGrEqlQTt8wWEwZJdPByO7i3ZNHvYpqjJr/8HR50
uyxg9Xomg2Gb03vD1xjdVPAZcTz2Jtfa6JiNmN1hC3Wxz0fUbwKcdEdhhXr8iRts
1EycRjjy4O3J2ty5kEjI5WCjnyGyqAxdIOPpocyzIIWBSBGHfy6fI9/35LNmZ2Tr
6XJJJfI7NXcrKzu48YEQxy4QdvpEI5ahwJmyFjVJjFM8HtFOVxliFOzMjzkvhiEo
SwO2SQvo0o2MdBsl3OlzvwNm0z6ffh8/3uGk0WmwaFoeCRs+plkG2zy/GOS7YrSY
DrpLTIThPQQV3A2rFFqRVYqZ8bkBDQRSbC+iAQgApIQ4HmDzQYwLgMrEgDVts/8S
fIdKHxeZ0MSltbNbgUwptfeW+LhtWBJ6niZkV+7U7kSGEbZBGWqsybEHdGcG3S4N
xlR9AoCEPRoiwbChy0nOOYCDySgfk35coP32+yzcAVvvCx/Tu8rdl4H+l00a23nl
x3aiRPlWkrrDJg5GqAkIfTX9j/MCGDYJ4j5TCWT4FbGuEF+fExgko5cUzG8y/2Hz
aHcEfC+Zt4P48Ir9MGwcImY45uHr8Z4UOaQ1WQBG8KAxKWmpqhik/8rLro91GnaA
L0Hip+vgkT7+Y7iPbVxIp+hr7wnHt7WCiccUXMIpCvo93GLR9jcReIzCx0/gOQAR
AQABiQEfBBgBAgAJBQJSbC+iAhsMAAoJEFQSMLoFw4vE0z8H/jQPJtfdh8s9AgWl
hhzCsm0b8LmhYW4bmOrbN5PCI1qTfnP68GCAOFHYqnGSbJvMYp07Yfcx90KRYP4E
yQxsVbnaiVj3d3teH8o7Nw8WaH+9XKsfg/vAyc7VRtr1UB0IvolGdeNeXjvJ3/PG
AfsSY8CGlA6ClBhZ8+q5cUVJLCvy+4emvXTiwJ4XZp96bmBHkit9QFbrqSoIo3Vr
gF0f4ZB/NFyL0VcZscH9yE4BXAqvs5uIGt8QQ03YrQJ2/JLzu/jUe0iEB3WWXxFm
JDDElWaDoRMaZTSxJgzuRi9/xhMlNRS45CI38FpiCS9AWgmyBBq9xKI6BMLunRWj
4CUtOWQ=
=jgj0
-----END PGP PUBLIC KEY BLOCK-----
daniel@RaspberryPi5:~ $ echo "deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main" | sudo tee /etc/apt/sources.list.d/pivccu.list
sudo apt update
deb [signed-by=/usr/share/keyrings/pivccu.asc] https://apt.pivccu.de/piVCCU stable main
Get:1 http://deb.debian.org/debian bookworm InRelease [151 kB]
Get:2 http://archive.raspberrypi.com/debian bookworm InRelease [55.0 kB]                                                                      
Get:3 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB]                                                             
Get:4 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]                     
Get:5 https://apt.pivccu.de/piVCCU stable InRelease [13.6 kB]                              
Get:6 http://deb.debian.org/debian bookworm/main armhf Packages [8,508 kB]
Get:7 http://archive.raspberrypi.com/debian bookworm/main armhf Packages [540 kB]
Get:8 https://apt.pivccu.de/piVCCU stable/main armhf Packages [16.4 kB]                                  
Get:9 http://archive.raspberrypi.com/debian bookworm/main arm64 Packages [538 kB]                                    
Get:10 https://apt.pivccu.de/piVCCU stable/main arm64 Packages [16.5 kB]                                          
Get:11 http://deb.debian.org/debian bookworm/main arm64 Packages [8,693 kB]                             
Get:12 http://deb.debian.org/debian bookworm/main Translation-en [6,109 kB]
Get:13 http://deb.debian.org/debian bookworm/contrib arm64 Packages [45.7 kB]
Get:14 http://deb.debian.org/debian bookworm/contrib Translation-en [48.4 kB]
Get:15 http://deb.debian.org/debian bookworm/non-free armhf Packages [55.9 kB]
Get:16 http://deb.debian.org/debian bookworm/non-free arm64 Packages [75.8 kB]
Get:17 http://deb.debian.org/debian bookworm/non-free Translation-en [68.1 kB]
Get:18 http://deb.debian.org/debian bookworm/non-free-firmware arm64 Packages [5,832 B]
Get:19 http://deb.debian.org/debian bookworm/non-free-firmware Translation-en [20.9 kB]
Get:20 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [248 kB]
Get:21 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [263 kB]
Get:22 http://deb.debian.org/debian-security bookworm-security/main Translation-en [160 kB]
Get:23 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [756 B]
Get:24 http://deb.debian.org/debian bookworm-updates/main armhf Packages [756 B]
Get:25 http://deb.debian.org/debian bookworm-updates/main Translation-en [664 B]
Fetched 25.7 MB in 4s (6,714 kB/s)                              
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
77 packages can be upgraded. Run 'apt list --upgradable' to see them.
N: Repository 'http://deb.debian.org/debian bookworm InRelease' changed its 'Version' value from '12.10' to '12.11'
daniel@RaspberryPi5:~ $ sudo apt install build-essential bison flex libssl-dev
sudo apt install raspberrypi-kernel-headers pivccu-modules-dkms
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
build-essential is already the newest version (12.9).
The following additional packages will be installed:
  libfl-dev libfl2 m4
Suggested packages:
  bison-doc flex-doc libssl-doc m4-doc
The following NEW packages will be installed:
  bison flex libfl-dev libfl2 libssl-dev m4
0 upgraded, 6 newly installed, 0 to remove and 77 not upgraded.
Need to get 5,453 kB of archives.
After this operation, 18.7 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB]
Get:2 http://archive.raspberrypi.com/debian bookworm/main arm64 libssl-dev arm64 3.0.16-1~deb12u1+rpt1 [3,444 kB]
Get:3 http://deb.debian.org/debian bookworm/main arm64 flex arm64 2.6.4-8.2 [411 kB]
Get:4 http://deb.debian.org/debian bookworm/main arm64 bison arm64 2:3.8.2+dfsg-1+b1 [1,152 kB]
Get:5 http://deb.debian.org/debian bookworm/main arm64 libfl2 arm64 2.6.4-8.2 [84.1 kB]
Get:6 http://deb.debian.org/debian bookworm/main arm64 libfl-dev arm64 2.6.4-8.2 [85.3 kB]
Fetched 5,453 kB in 1s (9,531 kB/s)                                    
Selecting previously unselected package m4.
(Reading database ... 56180 files and directories currently installed.)
Preparing to unpack .../0-m4_1.4.19-3_arm64.deb ...
Unpacking m4 (1.4.19-3) ...
Selecting previously unselected package flex.
Preparing to unpack .../1-flex_2.6.4-8.2_arm64.deb ...
Unpacking flex (2.6.4-8.2) ...
Selecting previously unselected package bison.
Preparing to unpack .../2-bison_2%3a3.8.2+dfsg-1+b1_arm64.deb ...
Unpacking bison (2:3.8.2+dfsg-1+b1) ...
Selecting previously unselected package libfl2:arm64.
Preparing to unpack .../3-libfl2_2.6.4-8.2_arm64.deb ...
Unpacking libfl2:arm64 (2.6.4-8.2) ...
Selecting previously unselected package libfl-dev:arm64.
Preparing to unpack .../4-libfl-dev_2.6.4-8.2_arm64.deb ...
Unpacking libfl-dev:arm64 (2.6.4-8.2) ...
Selecting previously unselected package libssl-dev:arm64.
Preparing to unpack .../5-libssl-dev_3.0.16-1~deb12u1+rpt1_arm64.deb ...
Unpacking libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ...
Setting up m4 (1.4.19-3) ...
Setting up libssl-dev:arm64 (3.0.16-1~deb12u1+rpt1) ...
Setting up libfl2:arm64 (2.6.4-8.2) ...
Setting up bison (2:3.8.2+dfsg-1+b1) ...
update-alternatives: using /usr/bin/bison.yacc to provide /usr/bin/yacc (yacc) in auto mode
Setting up flex (2.6.4-8.2) ...
Setting up libfl-dev:arm64 (2.6.4-8.2) ...
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for libc-bin (2.36-9+rpt2+deb12u10) ...
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  dkms
Suggested packages:
  menu
The following NEW packages will be installed:
  dkms pivccu-modules-dkms raspberrypi-kernel-headers
0 upgraded, 3 newly installed, 0 to remove and 77 not upgraded.
Need to get 10.3 MB of archives.
After this operation, 65.0 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://archive.raspberrypi.com/debian bookworm/main arm64 raspberrypi-kernel-headers arm64 1:1.20230405-1 [10.2 MB]
Get:2 http://deb.debian.org/debian bookworm/main arm64 dkms all 3.0.10-8+deb12u1 [48.7 kB]                                                    
Get:3 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-dkms all 1.0.85 [43.2 kB]                                                 
Fetched 10.3 MB in 1s (9,427 kB/s)                                                              
Preconfiguring packages ...
Selecting previously unselected package dkms.
(Reading database ... 56756 files and directories currently installed.)
Preparing to unpack .../dkms_3.0.10-8+deb12u1_all.deb ...
Unpacking dkms (3.0.10-8+deb12u1) ...
Setting up dkms (3.0.10-8+deb12u1) ...
Selecting previously unselected package pivccu-modules-dkms.
(Reading database ... 56780 files and directories currently installed.)
Preparing to unpack .../pivccu-modules-dkms_1.0.85_all.deb ...
Unpacking pivccu-modules-dkms (1.0.85) ...
Selecting previously unselected package raspberrypi-kernel-headers.
Preparing to unpack .../raspberrypi-kernel-headers_1%3a1.20230405-1_arm64.deb ...
Unpacking raspberrypi-kernel-headers (1:1.20230405-1) ...
Setting up raspberrypi-kernel-headers (1:1.20230405-1) ...
run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21+
dkms: autoinstall for kernel 6.1.21+ was skipped since the kernel headers for this kernel do not seem to be installed.
run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7+
dkms: autoinstall for kernel 6.1.21-v7+ was skipped since the kernel headers for this kernel do not seem to be installed.
run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v7l+
dkms: autoinstall for kernel 6.1.21-v7l+ was skipped since the kernel headers for this kernel do not seem to be installed.
run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.21-v8+
dkms: running auto installation service for kernel 6.1.21-v8+.
dkms: autoinstall for kernel: 6.1.21-v8+.
Setting up pivccu-modules-dkms (1.0.85) ...
Ensure non mixed processor architecure ... Done
Create kernel modules ... Done
Enable DKMS service ... Done
Processing triggers for man-db (2.11.2-2) ...
daniel@RaspberryPi5:~ $ sudo apt install pivccu-modules-raspberrypi
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  bc
The following NEW packages will be installed:
  bc pivccu-modules-raspberrypi
0 upgraded, 2 newly installed, 0 to remove and 77 not upgraded.
Need to get 110 kB of archives.
After this operation, 242 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://deb.debian.org/debian bookworm/main arm64 bc arm64 1.07.1-3 [107 kB]
Get:2 https://apt.pivccu.de/piVCCU stable/main arm64 pivccu-modules-raspberrypi all 2.0-19 [2,940 B]
Fetched 110 kB in 0s (682 kB/s)                        
Preconfiguring packages ...
Selecting previously unselected package bc.
(Reading database ... 74877 files and directories currently installed.)
Preparing to unpack .../archives/bc_1.07.1-3_arm64.deb ...
Unpacking bc (1.07.1-3) ...
Selecting previously unselected package pivccu-modules-raspberrypi.
Preparing to unpack .../pivccu-modules-raspberrypi_2.0-19_all.deb ...
dpkg-divert: warning: please specify --no-rename explicitly, the default will change to --rename in 1.20.x
Adding 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack'
Unpacking pivccu-modules-raspberrypi (2.0-19) ...
Setting up bc (1.07.1-3) ...
Setting up pivccu-modules-raspberrypi (2.0-19) ...
Removing 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack'
Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-rpi-modules.service → /lib/systemd/system/pivccu-rpi-modules.service.
Processing triggers for man-db (2.11.2-2) ...
daniel@RaspberryPi5:~ $ sudo bash -c 'cat << EOT >> /boot/firmware/config.txt
dtoverlay=pi3-disable-bt
EOT'
sudo systemctl disable hciuart.service
Removed "/etc/systemd/system/dev-serial1.device.wants/hciuart.service".
daniel@RaspberryPi5:~ $ sudo sed -i /boot/firmware/cmdline.txt -e "s/console=serial0,[0-9]\+ //"
sudo sed -i /boot/firmware/cmdline.txt -e "s/console=ttyAMA0,[0-9]\+ //"
daniel@RaspberryPi5:~ $ sudo ip link show | cut -d' ' -f2 | cut -d: -f1 | grep -e '^e.*'
eth0
daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5
sudo apt install bridge-utils
sudo bash -c 'cat << EOT > /etc/network/interfaces
source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

iface eth0 inet manual

auto br0
iface br0 inet dhcp
  bridge_ports eth0
EOT'
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package 'dhcpcd5' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Suggested packages:
  ifupdown
The following NEW packages will be installed:
  bridge-utils
0 upgraded, 1 newly installed, 0 to remove and 77 not upgraded.
Need to get 34.3 kB of archives.
After this operation, 145 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian bookworm/main arm64 bridge-utils arm64 1.7.1-1 [34.3 kB]
Fetched 34.3 kB in 0s (388 kB/s)      
Selecting previously unselected package bridge-utils.
(Reading database ... 74901 files and directories currently installed.)
Preparing to unpack .../bridge-utils_1.7.1-1_arm64.deb ...
Unpacking bridge-utils (1.7.1-1) ...
Setting up bridge-utils (1.7.1-1) ...
Processing triggers for man-db (2.11.2-2) ...
daniel@RaspberryPi5:~ $ sudo apt remove dhcpcd5
sudo apt install bridge-utils
sudo bash -c 'cat << EOT > /etc/network/interfaces
source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

iface eth0 inet manual

auto br0
iface br0 inet static
  bridge_ports eth0
  address <address>
  netmask <netmask>
  gateway <gateway>
  dns-nameservers <dns1> <dns2>
EOT'
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package 'dhcpcd5' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
bridge-utils is already the newest version (1.7.1-1).
0 upgraded, 0 newly installed, 0 to remove and 77 not upgraded.
daniel@RaspberryPi5:~ $ sudo reboot

Broadcast message from root@RaspberryPi5 on pts/1 (Fri 2025-06-20 08:44:58 BST):

The system will reboot now!

daniel@RaspberryPi5:~ $ Connection to 192.168.178.45 closed by remote host.
Connection to 192.168.178.45 closed.
danielsmacbook:~ daniel$ ssh daniel@RaspberryPi5
ssh: connect to host raspberrypi5 port 22: Operation timed out
danielsmacbook:~ daniel$ ssh 192.168.178.45
ssh: connect to host 192.168.178.45 port 22: Operation timed out
danielsmacbook:~ daniel$

Community Forum

NEWS

ioBroker startet nicht

Support us

543

32.4k

81.5k

1.3m