NEWS
Test Adapter Bosch ebik connect / flow
Tester
179
Posts
36
Posters
36.7k
Views
42
Watching
-
@tombox sagte in Test Adapter Bosch ebik connect / flow:
Kannst du die Pfade schreiben
Was genau meinst du damit?
Entschuldigung, wenn ich das nicht so schnell begreife!
-
@tombox Habe die falschen Trips bei Instanz 1 gelöscht und beide Instanzen neu gestartet.
Die Trips wurden dabei erneut von 0 in 1 geschrieben. Also eindeutig falsches Verhalten.
Als Übergangslösung vergleiche ich beim Abnehmen von Daten vorher die bikeID. -
@tombox Habe die falschen Trips bei Instanz 1 gelöscht und beide Instanzen neu gestartet.
Die Trips wurden dabei erneut von 0 in 1 geschrieben. Also eindeutig falsches Verhalten.
Als Übergangslösung vergleiche ich beim Abnehmen von Daten vorher die bikeID. -
@mclane Es können eigentlich nicht Instanz übergreifend Daten geschrieben werden .
Bei der Authentifizierung wurde die code url des anderen account eingefügt weil nicht explizit neu eingeloggt wurde. -
@tombox Dann weiß ich nicht. Aber ich habe definitiv zwei unterschiedliche Accounts in den Instanzen angegeben, und auch SingleKey-Logins. Ist aber reproduzierbar das Verhalten!
-
@mclane app username ist egal es ist wichtig welcher login nach dem singlekey login eingegeben wird
-
Hallo!
Ich habe auch gerade versucht den Adapter zu installieren, bekomme aber diese Fehlermeldung bei der Installation. Jemand eine Idee woran das liegen kann?
/home/iobroker/.cache/node-gyp/20.18.3/include/node/node_version.h:103: warning: "NAPI_VERSION" redefined 103 | #define NAPI_VERSION 9 | In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_api.h:12, from ../node_modules/node-addon-api/napi.h:13, from ../src/CanvasError.h:4, from ../src/Image.h:6, from ../src/Image.cc:3:/home/iobroker/.cache/node-gyp/20.18.3/include/node/js_native_api.h:20: note: this is the location of the previous definition 20 | #define NAPI_VERSION 8 | ../src/Image.cc: In member function ‘cairo_status_t Image::loadSVGFromBuffer(uint8_t*, unsigned int)’:../src/Image.cc:1483:3: error: ‘rsvg_handle_get_intrinsic_size_in_pixels’ was not declared in this scope; did you mean ‘rsvg_handle_get_intrinsic_dimensions’? 1483 | rsvg_handle_get_intrinsic_size_in_pixels(_rsvg, &d_width, &d_height); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | rsvg_handle_get_intrinsic_dimensions make: *** [canvas.target.mk:162: Release/obj.target/canvas/src/Image.o] Error 1 gyp ERR! node-gyp -v v10.1.0gyp ERR! not ok up to date in 2m run `npm fund` for details upload [3] bosch-ebike.admin /opt/iobroker/node_modules/iobroker.bosch-ebike/admin/bosch-ebike.png bosch-ebike.png image/png Updating objects from io-package.json for adapter "bosch-ebike" with version "0.1.12" Process exited with code 0 -
Hallo!
Ich habe auch gerade versucht den Adapter zu installieren, bekomme aber diese Fehlermeldung bei der Installation. Jemand eine Idee woran das liegen kann?
/home/iobroker/.cache/node-gyp/20.18.3/include/node/node_version.h:103: warning: "NAPI_VERSION" redefined 103 | #define NAPI_VERSION 9 | In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_api.h:12, from ../node_modules/node-addon-api/napi.h:13, from ../src/CanvasError.h:4, from ../src/Image.h:6, from ../src/Image.cc:3:/home/iobroker/.cache/node-gyp/20.18.3/include/node/js_native_api.h:20: note: this is the location of the previous definition 20 | #define NAPI_VERSION 8 | ../src/Image.cc: In member function ‘cairo_status_t Image::loadSVGFromBuffer(uint8_t*, unsigned int)’:../src/Image.cc:1483:3: error: ‘rsvg_handle_get_intrinsic_size_in_pixels’ was not declared in this scope; did you mean ‘rsvg_handle_get_intrinsic_dimensions’? 1483 | rsvg_handle_get_intrinsic_size_in_pixels(_rsvg, &d_width, &d_height); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | rsvg_handle_get_intrinsic_dimensions make: *** [canvas.target.mk:162: Release/obj.target/canvas/src/Image.o] Error 1 gyp ERR! node-gyp -v v10.1.0gyp ERR! not ok up to date in 2m run `npm fund` for details upload [3] bosch-ebike.admin /opt/iobroker/node_modules/iobroker.bosch-ebike/admin/bosch-ebike.png bosch-ebike.png image/png Updating objects from io-package.json for adapter "bosch-ebike" with version "0.1.12" Process exited with code 0@spectrum1981 das package canvas macht Probleme gibt es auch schon threads hie im forum
ich würde probieren
/opt/iobroker
npm install canvas -
Hallo!
Ich habe auch gerade versucht den Adapter zu installieren, bekomme aber diese Fehlermeldung bei der Installation. Jemand eine Idee woran das liegen kann?
/home/iobroker/.cache/node-gyp/20.18.3/include/node/node_version.h:103: warning: "NAPI_VERSION" redefined 103 | #define NAPI_VERSION 9 | In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_api.h:12, from ../node_modules/node-addon-api/napi.h:13, from ../src/CanvasError.h:4, from ../src/Image.h:6, from ../src/Image.cc:3:/home/iobroker/.cache/node-gyp/20.18.3/include/node/js_native_api.h:20: note: this is the location of the previous definition 20 | #define NAPI_VERSION 8 | ../src/Image.cc: In member function ‘cairo_status_t Image::loadSVGFromBuffer(uint8_t*, unsigned int)’:../src/Image.cc:1483:3: error: ‘rsvg_handle_get_intrinsic_size_in_pixels’ was not declared in this scope; did you mean ‘rsvg_handle_get_intrinsic_dimensions’? 1483 | rsvg_handle_get_intrinsic_size_in_pixels(_rsvg, &d_width, &d_height); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | rsvg_handle_get_intrinsic_dimensions make: *** [canvas.target.mk:162: Release/obj.target/canvas/src/Image.o] Error 1 gyp ERR! node-gyp -v v10.1.0gyp ERR! not ok up to date in 2m run `npm fund` for details upload [3] bosch-ebike.admin /opt/iobroker/node_modules/iobroker.bosch-ebike/admin/bosch-ebike.png bosch-ebike.png image/png Updating objects from io-package.json for adapter "bosch-ebike" with version "0.1.12" Process exited with code 0@spectrum1981 sagte in Test Adapter Bosch ebik connect / flow:
bekomme aber diese Fehlermeldung bei der Installation.
Das kann daran liegen, dass canvas einen ganzen Schwung an -dev-Files benötigt. Sind die Voraussetzungen erfüllt?
Ich meine einiob fixspült die bei Bedarf auf das System. Hängt aber auch mit dem verwendeten Release zusammen. Bist du da mit 'bookworm' / Debian 12 unterwegs?
-
@spectrum1981 das package canvas macht Probleme gibt es auch schon threads hie im forum
ich würde probieren
/opt/iobroker
npm install canvasOk, jetzt wird es wild. Hier scheint mehr im Argen zu sein:
pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm install canvas npm error code 1 npm error path /opt/iobroker/node_modules/canvas npm error command failed npm error command sh -c prebuild-install -r napi || node-gyp rebuild npm error make: Entering directory '/opt/iobroker/node_modules/canvas/build' npm error SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node npm error COPY Release/canvas-postbuild.node npm error CXX(target) Release/obj.target/canvas/src/backend/Backend.o npm error CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o npm error CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o npm error CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o npm error CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o npm error CXX(target) Release/obj.target/canvas/src/Backends.o npm error CXX(target) Release/obj.target/canvas/src/Canvas.o npm error CXX(target) Release/obj.target/canvas/src/CanvasGradient.o npm error CXX(target) Release/obj.target/canvas/src/CanvasPattern.o npm error CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o npm error CXX(target) Release/obj.target/canvas/src/closure.o npm error CXX(target) Release/obj.target/canvas/src/color.o npm error CXX(target) Release/obj.target/canvas/src/Image.o npm error make: Leaving directory '/opt/iobroker/node_modules/canvas/build' npm error prebuild-install warn install No prebuilt binaries found (target=7 runtime=napi arch=arm64 libc= platform=linux) npm error gyp info it worked if it ends with ok npm error gyp info using node-gyp@10.1.0 npm error gyp info using node@20.18.3 | linux | arm64 npm error gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3" npm error gyp info spawn /usr/bin/python3 npm error gyp info spawn args [ npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py', npm error gyp info spawn args 'binding.gyp', npm error gyp info spawn args '-f', npm error gyp info spawn args 'make', npm error gyp info spawn args '-I', npm error gyp info spawn args '/opt/iobroker/node_modules/canvas/build/config.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/20.18.3/include/node/common.gypi', npm error gyp info spawn args '-Dlibrary=shared_library', npm error gyp info spawn args '-Dvisibility=default', npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/20.18.3', npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp', npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/20.18.3/<(target_arch)/node.lib', npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/canvas', npm error gyp info spawn args '-Dnode_engine=v8', npm error gyp info spawn args '--depth=.', npm error gyp info spawn args '--no-parallel', npm error gyp info spawn args '--generator-output', npm error gyp info spawn args 'build', npm error gyp info spawn args '-Goutput_dir=.' npm error gyp info spawn args ] npm error gyp info spawn make npm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ] npm error In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node.h:76, npm error from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_buffer.h:25, npm error from ../src/Canvas.cc:23: npm error /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_version.h:103: warning: "NAPI_VERSION" redefined npm error 103 | #define NAPI_VERSION 9 npm error | npm error In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_api.h:12, npm error from ../node_modules/node-addon-api/napi.h:13, npm error from ../src/backend/Backend.h:6, npm error from ../src/Canvas.h:7, npm error from ../src/Canvas.cc:3: npm error /home/iobroker/.cache/node-gyp/20.18.3/include/node/js_native_api.h:20: note: this is the location of the previous definition npm error 20 | #define NAPI_VERSION 8 npm error | npm error In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node.h:76, npm error from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_buffer.h:25, npm error from ../src/Image.cc:11: npm error /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_version.h:103: warning: "NAPI_VERSION" redefined npm error 103 | #define NAPI_VERSION 9 npm error | npm error In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_api.h:12, npm error from ../node_modules/node-addon-api/napi.h:13, npm error from ../src/CanvasError.h:4, npm error from ../src/Image.h:6, npm error from ../src/Image.cc:3: npm error /home/iobroker/.cache/node-gyp/20.18.3/include/node/js_native_api.h:20: note: this is the location of the previous definition npm error 20 | #define NAPI_VERSION 8 npm error | npm error ../src/Image.cc: In member function ‘cairo_status_t Image::loadSVGFromBuffer(uint8_t*, unsigned int)’: npm error ../src/Image.cc:1483:3: error: ‘rsvg_handle_get_intrinsic_size_in_pixels’ was not declared in this scope; did you mean ‘rsvg_handle_get_intrinsic_dimensions’? npm error 1483 | rsvg_handle_get_intrinsic_size_in_pixels(_rsvg, &d_width, &d_height); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error | rsvg_handle_get_intrinsic_dimensions npm error make: *** [canvas.target.mk:162: Release/obj.target/canvas/src/Image.o] Error 1 npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2 npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:209:23) npm error gyp ERR! System Linux 6.1.21-v8+ npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" npm error gyp ERR! cwd /opt/iobroker/node_modules/canvas npm error gyp ERR! node -v v20.18.3 npm error gyp ERR! node-gyp -v v10.1.0 npm error gyp ERR! not ok npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-03-04T18_49_02_174Z-debug-0.logpi@raspberrypi:/opt/iobroker $ cd /opt/iobroker/ pi@raspberrypi:/opt/iobroker $ npm list canvas iobroker.inst@3.0.0 /opt/iobroker └── (empty) -
Ok, jetzt wird es wild. Hier scheint mehr im Argen zu sein:
pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm install canvas npm error code 1 npm error path /opt/iobroker/node_modules/canvas npm error command failed npm error command sh -c prebuild-install -r napi || node-gyp rebuild npm error make: Entering directory '/opt/iobroker/node_modules/canvas/build' npm error SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node npm error COPY Release/canvas-postbuild.node npm error CXX(target) Release/obj.target/canvas/src/backend/Backend.o npm error CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o npm error CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o npm error CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o npm error CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o npm error CXX(target) Release/obj.target/canvas/src/Backends.o npm error CXX(target) Release/obj.target/canvas/src/Canvas.o npm error CXX(target) Release/obj.target/canvas/src/CanvasGradient.o npm error CXX(target) Release/obj.target/canvas/src/CanvasPattern.o npm error CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o npm error CXX(target) Release/obj.target/canvas/src/closure.o npm error CXX(target) Release/obj.target/canvas/src/color.o npm error CXX(target) Release/obj.target/canvas/src/Image.o npm error make: Leaving directory '/opt/iobroker/node_modules/canvas/build' npm error prebuild-install warn install No prebuilt binaries found (target=7 runtime=napi arch=arm64 libc= platform=linux) npm error gyp info it worked if it ends with ok npm error gyp info using node-gyp@10.1.0 npm error gyp info using node@20.18.3 | linux | arm64 npm error gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3" npm error gyp info spawn /usr/bin/python3 npm error gyp info spawn args [ npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py', npm error gyp info spawn args 'binding.gyp', npm error gyp info spawn args '-f', npm error gyp info spawn args 'make', npm error gyp info spawn args '-I', npm error gyp info spawn args '/opt/iobroker/node_modules/canvas/build/config.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/20.18.3/include/node/common.gypi', npm error gyp info spawn args '-Dlibrary=shared_library', npm error gyp info spawn args '-Dvisibility=default', npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/20.18.3', npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp', npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/20.18.3/<(target_arch)/node.lib', npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/canvas', npm error gyp info spawn args '-Dnode_engine=v8', npm error gyp info spawn args '--depth=.', npm error gyp info spawn args '--no-parallel', npm error gyp info spawn args '--generator-output', npm error gyp info spawn args 'build', npm error gyp info spawn args '-Goutput_dir=.' npm error gyp info spawn args ] npm error gyp info spawn make npm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ] npm error In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node.h:76, npm error from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_buffer.h:25, npm error from ../src/Canvas.cc:23: npm error /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_version.h:103: warning: "NAPI_VERSION" redefined npm error 103 | #define NAPI_VERSION 9 npm error | npm error In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_api.h:12, npm error from ../node_modules/node-addon-api/napi.h:13, npm error from ../src/backend/Backend.h:6, npm error from ../src/Canvas.h:7, npm error from ../src/Canvas.cc:3: npm error /home/iobroker/.cache/node-gyp/20.18.3/include/node/js_native_api.h:20: note: this is the location of the previous definition npm error 20 | #define NAPI_VERSION 8 npm error | npm error In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node.h:76, npm error from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_buffer.h:25, npm error from ../src/Image.cc:11: npm error /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_version.h:103: warning: "NAPI_VERSION" redefined npm error 103 | #define NAPI_VERSION 9 npm error | npm error In file included from /home/iobroker/.cache/node-gyp/20.18.3/include/node/node_api.h:12, npm error from ../node_modules/node-addon-api/napi.h:13, npm error from ../src/CanvasError.h:4, npm error from ../src/Image.h:6, npm error from ../src/Image.cc:3: npm error /home/iobroker/.cache/node-gyp/20.18.3/include/node/js_native_api.h:20: note: this is the location of the previous definition npm error 20 | #define NAPI_VERSION 8 npm error | npm error ../src/Image.cc: In member function ‘cairo_status_t Image::loadSVGFromBuffer(uint8_t*, unsigned int)’: npm error ../src/Image.cc:1483:3: error: ‘rsvg_handle_get_intrinsic_size_in_pixels’ was not declared in this scope; did you mean ‘rsvg_handle_get_intrinsic_dimensions’? npm error 1483 | rsvg_handle_get_intrinsic_size_in_pixels(_rsvg, &d_width, &d_height); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error | rsvg_handle_get_intrinsic_dimensions npm error make: *** [canvas.target.mk:162: Release/obj.target/canvas/src/Image.o] Error 1 npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2 npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:209:23) npm error gyp ERR! System Linux 6.1.21-v8+ npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" npm error gyp ERR! cwd /opt/iobroker/node_modules/canvas npm error gyp ERR! node -v v20.18.3 npm error gyp ERR! node-gyp -v v10.1.0 npm error gyp ERR! not ok npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-03-04T18_49_02_174Z-debug-0.logpi@raspberrypi:/opt/iobroker $ cd /opt/iobroker/ pi@raspberrypi:/opt/iobroker $ npm list canvas iobroker.inst@3.0.0 /opt/iobroker └── (empty)Halb so wild, wenn alles korrekt installiert (und auf aktuellem Stand) ist:
echad@chet:~ $ npm install canvas added 37 packages in 3m 9 packages are looking for funding run `npm fund` for details npm notice npm notice New major version of npm available! 10.8.2 -> 11.1.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.1.0 npm notice To update run: npm install -g npm@11.1.0 npm notice echad@chet:~ $ npm ls canvas echad@ /home/echad └── canvas@3.1.0Da stimmen also die Voraussetzungen nicht. Hast du den Fixer ausgeführt?
-
Halb so wild, wenn alles korrekt installiert (und auf aktuellem Stand) ist:
echad@chet:~ $ npm install canvas added 37 packages in 3m 9 packages are looking for funding run `npm fund` for details npm notice npm notice New major version of npm available! 10.8.2 -> 11.1.0 npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.1.0 npm notice To update run: npm install -g npm@11.1.0 npm notice echad@chet:~ $ npm ls canvas echad@ /home/echad └── canvas@3.1.0Da stimmen also die Voraussetzungen nicht. Hast du den Fixer ausgeführt?
Ja,habe ich und auch schon neugestartet.
-
Ja,habe ich und auch schon neugestartet.
-
Klar. Hier haste einiges zu lesen
Und schon mal jetzt vielen Dank für die Hilfe!
========== Start marking the full check here =========== ```bash Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 21:53:35 up 4:53, 2 users, load average: 1.13, 0.72, 0.53 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Tue 2025-03-04 21:53:35 CET Universal time: Tue 2025-03-04 20:53:35 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev influxdb gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video plugdev bluetooth redis gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 3.1G 3.1G 0.0K 1.6G 4.6G Swap: 99M 0B 99M Total: 7.9G 3.1G 3.2G Active iob-Instances: 25 7812 M total memory 3102 M used memory 3439 M active memory 1039 M inactive memory 3137 M free memory 122 M buffer memory 1449 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:53:36 up 4:53, 2 users, load average: 1.13, 0.72, 0.53 Tasks: 185 total, 2 running, 183 sleeping, 0 stopped, 0 zombie %Cpu(s): 23.5 us, 8.8 sy, 0.0 ni, 67.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7812.3 total, 3130.7 free, 3105.0 used, 1576.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 4552.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 58G 16G 40G 29% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 892K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 31M 222M 13% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Mar 4 17:00:27 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:D6:FF:DA vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=43dc5f67-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Mar 4 17:00:28 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Mar 4 17:00:28 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Mar 4 17:00:30 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 5.5G /var/ 4.1G /var/log 4.0G /var/log/journal/fac7f0655ecd4193826bcb0a2d76a163 4.0G /var/log/journal 818M /var/lib Archived and active journals take up 3.9G in the file system. /opt/iobroker/backups: 2.6G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 129M /opt/iobroker/iobroker-data/ 104M /opt/iobroker/iobroker-data/history 14M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 9.8M /opt/iobroker/iobroker-data/objects.jsonl 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/states.jsonl 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_08e8a16dac1aec11a7fc74e5f01c6278-if00-port0 /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0050-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB1 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.18.3 /usr/bin/node v20.18.3 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.30.0 nodejs: Installed: 20.18.3-1nodesource1 Candidate: 20.18.3-1nodesource1 Version table: *** 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u6 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: raspberrypi raspberrypi (version: 7.0.6, hostname: raspberrypi , alive, uptime: 17556) Core adapters versions js-controller: 7.0.6 admin: 7.4.10 javascript: 8.8.3 nodejs modules from github: 3 +-- iobroker.ankersolix2@1.1.0 (git+ssh://git@github.com/ronny130286/ioBroker.ankersolix2.git#b60ae2fdf9087fc1b27da425d483dec2e0cb0a6b) +-- iobroker.bosch-ebike@0.1.12 (git+ssh://git@github.com/TA2k/ioBroker.bosch-ebike.git#71ad7a8139a8af772f671e9c37eddf2ad064c69e) +-- iobroker.lovelace@4.1.11 (git+ssh://git@github.com/ioBroker/ioBroker.lovelace.git#0fbfd8694eb401357df1c47fa41dd0e7147e582d) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - enabled + system.adapter.ankersolix2.0 : ankersolix2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 192.168.81.250, run as: admin + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.pushover.0 : pushover : raspberrypi - enabled + system.adapter.roborock.0 : roborock : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB1 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 192.168.81.250, run as: admin + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB1 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.4.10 , installed 7.4.10 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "lovelace" : 4.1.10 , installed 4.1.11 Adapter "mihome-vacuum": 5.2.0 , installed 5.2.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "rpi2" : 2.3.1 , installed 2.3.1 Adapter "shelly" : 8.5.1 , installed 8.5.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 1.10.14 , installed 1.10.14 Objects and States Please stand by - This may take a while Objects: 7634 States: 6440 *** OS-Repositories and Updates *** Hit:1 https://repos.influxdata.com/debian stable InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://security.debian.org/debian-security bullseye-security InRelease Hit:5 https://packages.grafana.com/oss/deb stable InRelease Hit:6 http://archive.raspberrypi.org/debian bullseye InRelease Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:6010 0.0.0.0:* LISTEN 1000 254603 8885/sshd: pi@pts/0 tcp 0 0 192.168.81.250:2001 0.0.0.0:* LISTEN 1001 18662 1312/io.hm-rpc.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 17595 1124/io.sonoff.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 17076 1297/io.shelly.0 tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 109 14235 525/redis-server 12 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1687 568/sshd: /usr/sbin tcp 0 0 192.168.81.250:8091 0.0.0.0:* LISTEN 1001 16135 1479/io.lovelace.0 tcp6 0 0 :::8081 :::* LISTEN 1001 15604 937/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 17334 1456/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 16331 1556/io.socketio.0 tcp6 0 0 :::8086 :::* LISTEN 999 15033 794/influxd tcp6 0 0 :::7906 :::* LISTEN 1001 15305 1016/io.roborock.0 tcp6 0 0 ::1:6010 :::* LISTEN 1000 254602 8885/sshd: pi@pts/0 tcp6 0 0 :::3000 :::* LISTEN 110 15550 904/grafana tcp6 0 0 :::6824 :::* LISTEN 1001 15304 1016/io.roborock.0 tcp6 0 0 :::1984 :::* LISTEN 1000 12791 424/go2rtc_linux_ar tcp6 0 0 ::1:6379 :::* LISTEN 109 14236 525/redis-server 12 tcp6 0 0 :::8555 :::* LISTEN 1000 12794 424/go2rtc_linux_ar tcp6 0 0 :::8554 :::* LISTEN 1000 14542 424/go2rtc_linux_ar tcp6 0 0 :::22 :::* LISTEN 0 1689 568/sshd: /usr/sbin udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 17275 1430/io.mihome-vacu udp 0 0 0.0.0.0:53422 0.0.0.0:* 1001 18954 1441/io.mihome-vacu udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1645 419/avahi-daemon: r udp 0 0 0.0.0.0:55408 0.0.0.0:* 108 1647 419/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12811 737/dhcpcd udp6 0 0 :::546 :::* 0 1702 737/dhcpcd udp6 0 0 :::5353 :::* 108 1646 419/avahi-daemon: r udp6 0 0 :::35851 :::* 108 1648 419/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-03-04 21:50:14.330 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:50:22.050 - info: javascript.0 (1070) script.js.fussbodenheizung.steuerung: Temperatur kleiner als: 19.89 Heizkreis Flur OG wird eingeschaltet 2025-03-04 21:50:25.349 - info: smartmeter.0 (1379) Received 22 values, 14 updated 2025-03-04 21:50:36.328 - info: smartmeter.0 (1379) Received 22 values, 11 updated 2025-03-04 21:50:47.319 - info: smartmeter.0 (1379) Received 22 values, 11 updated 2025-03-04 21:50:58.323 - info: smartmeter.0 (1379) Received 22 values, 12 updated 2025-03-04 21:51:09.318 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:51:20.334 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:51:31.327 - info: smartmeter.0 (1379) Received 22 values, 8 updated 2025-03-04 21:51:42.333 - info: smartmeter.0 (1379) Received 22 values, 8 updated 2025-03-04 21:51:53.373 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:52:04.357 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:52:15.324 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:52:26.316 - info: smartmeter.0 (1379) Received 22 values, 9 updated 2025-03-04 21:52:28.508 - info: javascript.0 (1070) script.js.fussbodenheizung.steuerung: Temperatur größer als: 21.53 Heizkreis Kind wird ausgeschaltet 2025-03-04 21:52:37.342 - info: smartmeter.0 (1379) Received 22 values, 12 updated 2025-03-04 21:52:48.340 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:52:59.328 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:53:10.326 - info: smartmeter.0 (1379) Received 22 values, 9 updated 2025-03-04 21:53:21.350 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:53:32.359 - info: smartmeter.0 (1379) Received 22 values, 11 updated 2025-03-04 21:53:43.328 - info: smartmeter.0 (1379) Received 22 values, 9 updated 2025-03-04 21:53:54.307 - info: smartmeter.0 (1379) Received 22 values, 7 updated 2025-03-04 21:54:05.349 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:54:16.326 - info: smartmeter.0 (1379) Received 22 values, 12 updated============ Mark until here for C&P =============
iob diag has finished.
Copy text starting here:
======================= SUMMARY ======================= v.2025-02-23 Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.3 /usr/bin/node v20.18.3 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.30.0 Recommended versions are nodejs 20.18.3 and npm 10.8.2 nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 3.1G 3.3G 0.0K 1.4G 4.6G Swap: 99M 0B 99M Total: 7.9G 3.1G 3.4G Active iob-Instances: 25 Upgrade policy: none ioBroker Core: js-controller 7.0.6 admin 7.4.10 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin Objects: 7634 States: 6440 Size of iob-Database: 9.8M /opt/iobroker/iobroker-data/objects.jsonl 1.6M /opt/iobroker/iobroker-data/states.jsonl Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! =================== END OF SUMMARY ======================= Mark text until here for copying ===
-
Klar. Hier haste einiges zu lesen
Und schon mal jetzt vielen Dank für die Hilfe!
========== Start marking the full check here =========== ```bash Script v.2025-02-23 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 21:53:35 up 4:53, 2 users, load average: 1.13, 0.72, 0.53 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Tue 2025-03-04 21:53:35 CET Universal time: Tue 2025-03-04 20:53:35 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev influxdb gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video plugdev bluetooth redis gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 3.1G 3.1G 0.0K 1.6G 4.6G Swap: 99M 0B 99M Total: 7.9G 3.1G 3.2G Active iob-Instances: 25 7812 M total memory 3102 M used memory 3439 M active memory 1039 M inactive memory 3137 M free memory 122 M buffer memory 1449 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:53:36 up 4:53, 2 users, load average: 1.13, 0.72, 0.53 Tasks: 185 total, 2 running, 183 sleeping, 0 stopped, 0 zombie %Cpu(s): 23.5 us, 8.8 sy, 0.0 ni, 67.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7812.3 total, 3130.7 free, 3105.0 used, 1576.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 4552.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 58G 16G 40G 29% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 892K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 31M 222M 13% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Mar 4 17:00:27 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:D6:FF:DA vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=43dc5f67-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Mar 4 17:00:28 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Mar 4 17:00:28 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Mar 4 17:00:30 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 5.5G /var/ 4.1G /var/log 4.0G /var/log/journal/fac7f0655ecd4193826bcb0a2d76a163 4.0G /var/log/journal 818M /var/lib Archived and active journals take up 3.9G in the file system. /opt/iobroker/backups: 2.6G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 129M /opt/iobroker/iobroker-data/ 104M /opt/iobroker/iobroker-data/history 14M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 9.8M /opt/iobroker/iobroker-data/objects.jsonl 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/states.jsonl 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_08e8a16dac1aec11a7fc74e5f01c6278-if00-port0 /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0050-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB1 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.18.3 /usr/bin/node v20.18.3 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.30.0 nodejs: Installed: 20.18.3-1nodesource1 Candidate: 20.18.3-1nodesource1 Version table: *** 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u6 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: raspberrypi raspberrypi (version: 7.0.6, hostname: raspberrypi , alive, uptime: 17556) Core adapters versions js-controller: 7.0.6 admin: 7.4.10 javascript: 8.8.3 nodejs modules from github: 3 +-- iobroker.ankersolix2@1.1.0 (git+ssh://git@github.com/ronny130286/ioBroker.ankersolix2.git#b60ae2fdf9087fc1b27da425d483dec2e0cb0a6b) +-- iobroker.bosch-ebike@0.1.12 (git+ssh://git@github.com/TA2k/ioBroker.bosch-ebike.git#71ad7a8139a8af772f671e9c37eddf2ad064c69e) +-- iobroker.lovelace@4.1.11 (git+ssh://git@github.com/ioBroker/ioBroker.lovelace.git#0fbfd8694eb401357df1c47fa41dd0e7147e582d) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - enabled + system.adapter.ankersolix2.0 : ankersolix2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 192.168.81.250, run as: admin + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.pushover.0 : pushover : raspberrypi - enabled + system.adapter.roborock.0 : roborock : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB1 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 192.168.81.250, run as: admin + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB1 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.4.10 , installed 7.4.10 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.0.31 , installed 3.0.31 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "lovelace" : 4.1.10 , installed 4.1.11 Adapter "mihome-vacuum": 5.2.0 , installed 5.2.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "rpi2" : 2.3.1 , installed 2.3.1 Adapter "shelly" : 8.5.1 , installed 8.5.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 1.10.14 , installed 1.10.14 Objects and States Please stand by - This may take a while Objects: 7634 States: 6440 *** OS-Repositories and Updates *** Hit:1 https://repos.influxdata.com/debian stable InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://security.debian.org/debian-security bullseye-security InRelease Hit:5 https://packages.grafana.com/oss/deb stable InRelease Hit:6 http://archive.raspberrypi.org/debian bullseye InRelease Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:6010 0.0.0.0:* LISTEN 1000 254603 8885/sshd: pi@pts/0 tcp 0 0 192.168.81.250:2001 0.0.0.0:* LISTEN 1001 18662 1312/io.hm-rpc.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 17595 1124/io.sonoff.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 17076 1297/io.shelly.0 tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 109 14235 525/redis-server 12 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1687 568/sshd: /usr/sbin tcp 0 0 192.168.81.250:8091 0.0.0.0:* LISTEN 1001 16135 1479/io.lovelace.0 tcp6 0 0 :::8081 :::* LISTEN 1001 15604 937/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 17334 1456/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 16331 1556/io.socketio.0 tcp6 0 0 :::8086 :::* LISTEN 999 15033 794/influxd tcp6 0 0 :::7906 :::* LISTEN 1001 15305 1016/io.roborock.0 tcp6 0 0 ::1:6010 :::* LISTEN 1000 254602 8885/sshd: pi@pts/0 tcp6 0 0 :::3000 :::* LISTEN 110 15550 904/grafana tcp6 0 0 :::6824 :::* LISTEN 1001 15304 1016/io.roborock.0 tcp6 0 0 :::1984 :::* LISTEN 1000 12791 424/go2rtc_linux_ar tcp6 0 0 ::1:6379 :::* LISTEN 109 14236 525/redis-server 12 tcp6 0 0 :::8555 :::* LISTEN 1000 12794 424/go2rtc_linux_ar tcp6 0 0 :::8554 :::* LISTEN 1000 14542 424/go2rtc_linux_ar tcp6 0 0 :::22 :::* LISTEN 0 1689 568/sshd: /usr/sbin udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 17275 1430/io.mihome-vacu udp 0 0 0.0.0.0:53422 0.0.0.0:* 1001 18954 1441/io.mihome-vacu udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1645 419/avahi-daemon: r udp 0 0 0.0.0.0:55408 0.0.0.0:* 108 1647 419/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12811 737/dhcpcd udp6 0 0 :::546 :::* 0 1702 737/dhcpcd udp6 0 0 :::5353 :::* 108 1646 419/avahi-daemon: r udp6 0 0 :::35851 :::* 108 1648 419/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-03-04 21:50:14.330 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:50:22.050 - info: javascript.0 (1070) script.js.fussbodenheizung.steuerung: Temperatur kleiner als: 19.89 Heizkreis Flur OG wird eingeschaltet 2025-03-04 21:50:25.349 - info: smartmeter.0 (1379) Received 22 values, 14 updated 2025-03-04 21:50:36.328 - info: smartmeter.0 (1379) Received 22 values, 11 updated 2025-03-04 21:50:47.319 - info: smartmeter.0 (1379) Received 22 values, 11 updated 2025-03-04 21:50:58.323 - info: smartmeter.0 (1379) Received 22 values, 12 updated 2025-03-04 21:51:09.318 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:51:20.334 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:51:31.327 - info: smartmeter.0 (1379) Received 22 values, 8 updated 2025-03-04 21:51:42.333 - info: smartmeter.0 (1379) Received 22 values, 8 updated 2025-03-04 21:51:53.373 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:52:04.357 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:52:15.324 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:52:26.316 - info: smartmeter.0 (1379) Received 22 values, 9 updated 2025-03-04 21:52:28.508 - info: javascript.0 (1070) script.js.fussbodenheizung.steuerung: Temperatur größer als: 21.53 Heizkreis Kind wird ausgeschaltet 2025-03-04 21:52:37.342 - info: smartmeter.0 (1379) Received 22 values, 12 updated 2025-03-04 21:52:48.340 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:52:59.328 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:53:10.326 - info: smartmeter.0 (1379) Received 22 values, 9 updated 2025-03-04 21:53:21.350 - info: smartmeter.0 (1379) Received 22 values, 10 updated 2025-03-04 21:53:32.359 - info: smartmeter.0 (1379) Received 22 values, 11 updated 2025-03-04 21:53:43.328 - info: smartmeter.0 (1379) Received 22 values, 9 updated 2025-03-04 21:53:54.307 - info: smartmeter.0 (1379) Received 22 values, 7 updated 2025-03-04 21:54:05.349 - info: smartmeter.0 (1379) Received 22 values, 13 updated 2025-03-04 21:54:16.326 - info: smartmeter.0 (1379) Received 22 values, 12 updated============ Mark until here for C&P =============
iob diag has finished.
Copy text starting here:
======================= SUMMARY ======================= v.2025-02-23 Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.3 /usr/bin/node v20.18.3 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.30.0 Recommended versions are nodejs 20.18.3 and npm 10.8.2 nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 3.1G 3.3G 0.0K 1.4G 4.6G Swap: 99M 0B 99M Total: 7.9G 3.1G 3.4G Active iob-Instances: 25 Upgrade policy: none ioBroker Core: js-controller 7.0.6 admin 7.4.10 ioBroker Status: iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin Objects: 7634 States: 6440 Size of iob-Database: 9.8M /opt/iobroker/iobroker-data/objects.jsonl 1.6M /opt/iobroker/iobroker-data/states.jsonl Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! =================== END OF SUMMARY ======================= Mark text until here for copying ===
@spectrum1981 sagte in Test Adapter Bosch ebik connect / flow:
Klar. Hier haste einiges zu lesen
Nee, muss ich nicht.
Bring das per NEUINSTALLATION auf Debian 12 'Bookworm'.
Danach schau ich mir das gegebenenfalls weiter an. -
@spectrum1981 sagte in Test Adapter Bosch ebik connect / flow:
Klar. Hier haste einiges zu lesen
Nee, muss ich nicht.
Bring das per NEUINSTALLATION auf Debian 12 'Bookworm'.
Danach schau ich mir das gegebenenfalls weiter an.Ok, das hier ist keine Option auch wenn nicht die Sauberste? Da ist leider noch mehr drauf wie der iobroker alleine
https://forum.iobroker.net/topic/65655/upgrade-von-debian-11-bullseye-auf-12-bookworm
-
Ok, das hier ist keine Option auch wenn nicht die Sauberste? Da ist leider noch mehr drauf wie der iobroker alleine
https://forum.iobroker.net/topic/65655/upgrade-von-debian-11-bullseye-auf-12-bookworm
Nicht wirklich.
-
Nicht wirklich.
Ok, ich plane das mal und werde das angehen. Vielen Dank!
-
Ok, ich plane das mal und werde das angehen. Vielen Dank!
Ein Backup-Konzept musste ja eh haben, egal wieviel Zeug auf der Kiste läuft.
Könnte ja auch sein, dass der Hobel aus anderen Gründen neuinstalliert werden muss. -
Hallo McLane,
eine Frage, was machst du mit den Daten der einzelnen Ausfahrten?
Ich würde mir gerne auch meine Fahrten, vor allem die unterschiedlichen Stufen, anzeigen lassen. Vielleicht sogar die map dazu. Hast du hierzu einen Ansatz wie die Daten zu visualisieren sind?
Da
nkeVG
Schienw
Support us
342
Online32.4k
Users81.4k
Topics1.3m
Posts