Weihnachtsangebot 2025! 🎄

[Laser]

@thomas-braun sagte in InfluxDB installieren wie:

ls -lh /etc/apt/sources.list.d/

 ls -lh /etc/apt/sources.list.d/
total 20K
-rw-r--r-- 1 root root 2.8K Jan  1 14:53 export
-rw-r--r-- 1 root root   60 Nov 20  2023 grafana.list
-rw-r--r-- 1 root root  114 Jan  1 15:18 influxdata.list
-rw-r--r-- 1 root root  100 Oct 15 18:10 nodesource.list
-rw-r--r-- 1 root root  191 Oct 10  2023 raspi.list

in influxdata.list steht:

deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main

[Thomas Braun]

@laser sagte in InfluxDB installieren wie:

/etc/apt/sources.list.d/

sudo rm /etc/apt/sources.list.d/export

Und gewöhn dir bitte an, die Ein- und Ausgaben aus der Konsole VOLLSTÄNDIG zu posten.
Dann würde man nämlich eher sehen, mit welchem user du da in welchem Verzeichnis herumhampelst.

[Laser]

@thomas-braun OK, mache ich. habe aus Datenschutzgründen meinen streng geheimen Usernamen weg gelassen.

otto@neuheizung:~ $  ls -lh /etc/apt/sources.list.d/
total 20K
-rw-r--r-- 1 root root 2.8K Jan  1 14:53 export
-rw-r--r-- 1 root root   60 Nov 20  2023 grafana.list
-rw-r--r-- 1 root root  114 Jan  1 15:18 influxdata.list
-rw-r--r-- 1 root root  100 Oct 15 18:10 nodesource.list
-rw-r--r-- 1 root root  191 Oct 10  2023 raspi.list

Jetzt:

otto@neuheizung:~ $ ls -lh /etc/apt/sources.list.d/
total 16K
-rw-r--r-- 1 root root  60 Nov 20  2023 grafana.list
-rw-r--r-- 1 root root 114 Jan  1 15:18 influxdata.list
-rw-r--r-- 1 root root 100 Oct 15 18:10 nodesource.list
-rw-r--r-- 1 root root 191 Oct 10  2023 raspi.list

[Thomas Braun]

@laser

Dann sollte das nun richtig funktionieren.

[Laser]

@thomas-braun eine Fehlermeldung kommt schon mal nicht mehr.

[Thomas Braun]

@laser

sudo apt update

läuft sauber durch?

[Laser]

@thomas-braun sudo apt update und apt policy influxdb2 läuft durch, die influxdb läßt sich aber noch nicht starten. Muß ich noch mehr installieren? in meiner alten Anleitung stand noch:

 sudo apt-get install -y apt-transport-https
 sudo apt-get install -y software-properties-common wget

 evtl. zwischendurch "reboot"

sudo apt install influxdb-client
sudo service influxdb start
sudo service influxdb status

sudo systemctl unmask influxdb.service
sudo systemctl start influxdb.service
sudo systemctl enable influxdb.service

[Thomas Braun]

@laser

Ist doch installiert:

influxdb2:
  Installed: 2.7.11-1
  Candidate: 2.7.11-1

systemctl status influxdb*

sagt?

[Laser]

@thomas-braun sagte in InfluxDB installieren wie:

systemctl status influxdb*

otto@neuheizung:~ $ systemctl status influxdb*
× influxdb.service - InfluxDB is an open-source, distributed, time series database
     Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; preset: enabled)
     Active: failed (Result: exit-code) since Wed 2025-01-01 15:33:58 CET; 4min 27s ago
       Docs: https://docs.influxdata.com/influxdb/
    Process: 12396 ExecStart=/usr/lib/influxdb/scripts/influxd-systemd-start.sh (code=exited, status=127)
        CPU: 8ms

Jan 01 15:33:58 neuheizung systemd[1]: influxdb.service: Scheduled restart job, restart counter is at 5.
Jan 01 15:33:58 neuheizung systemd[1]: Stopped influxdb.service - InfluxDB is an open-source, distributed, time series databa>
Jan 01 15:33:58 neuheizung systemd[1]: influxdb.service: Start request repeated too quickly.
Jan 01 15:33:58 neuheizung systemd[1]: influxdb.service: Failed with result 'exit-code'.
Jan 01 15:33:58 neuheizung systemd[1]: Failed to start influxdb.service - InfluxDB is an open-source, distributed, time serie>

werde noch ein reboot machen. Hat aber nicht geholfen.

otto@neuheizung:~ $ systemctl status influxdb*
× influxdb.service - InfluxDB is an open-source, distributed, time series database
     Loaded: loaded (/lib/systemd/system/influxdb.service; enabled; preset: enabled)
     Active: failed (Result: exit-code) since Wed 2025-01-01 15:42:56 CET; 5s ago
       Docs: https://docs.influxdata.com/influxdb/
    Process: 799 ExecStart=/usr/lib/influxdb/scripts/influxd-systemd-start.sh (code=exited, status=127)
        CPU: 7ms

Jan 01 15:42:56 neuheizung systemd[1]: influxdb.service: Scheduled restart job, restart counter is at 5.
Jan 01 15:42:56 neuheizung systemd[1]: Stopped influxdb.service - InfluxDB is an open-source, distributed, time series database.
Jan 01 15:42:56 neuheizung systemd[1]: influxdb.service: Start request repeated too quickly.
Jan 01 15:42:56 neuheizung systemd[1]: influxdb.service: Failed with result 'exit-code'.
Jan 01 15:42:56 neuheizung systemd[1]: Failed to start influxdb.service - InfluxDB is an open-source, distributed, time series database.
otto@neuheizung:~ $ sudo service influxdb start
Job for influxdb.service failed because the control process exited with error code.
See "systemctl status influxdb.service" and "journalctl -xeu influxdb.service" for details.

da fehlt noch was...

otto@neuheizung:~ $ journalctl -xeu influxdb.service
░░ Subject: A stop job for unit influxdb.service has finished
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ A stop job for unit influxdb.service has finished.
░░
░░ The job identifier is 1512 and the job result is done.
Jan 01 15:51:25 neuheizung systemd[1]: influxdb.service: Start request repeated too quickly.
Jan 01 15:51:25 neuheizung systemd[1]: influxdb.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ The unit influxdb.service has entered the 'failed' state with result 'exit-code'.
Jan 01 15:51:25 neuheizung systemd[1]: Failed to start influxdb.service - InfluxDB is an open-source, distributed, time series database.
░░ Subject: A start job for unit influxdb.service has failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ A start job for unit influxdb.service has finished with a failure.
░░
░░ The job identifier is 1512 and the job result is failed.

[Thomas Braun]

@laser

Lt. offizieller Anleitung war es das:

If InfluxDB was installed as a systemd service, systemd manages the influxd daemon and no further action is required.

Was du da nun unterdessen noch nebenher anders gemacht hast weißt nur du.

[Laser]

@thomas-braun Ich habe versucht, influxdb zu deinstallieren und wieder neu zu installieren. Die Daten waren mir erst mal egal. Von der letzten Installation vor 1 Jahr weiß ich noch schwach, daß z.B. ein influx-CLI gebraucht wird. Ist das nicht so? Wie das geht, habe ich mir nicht aufgeschrieben.

[Thomas Braun]

@laser

Das dürfte entweder influxdb2-cli oder influxdb2-client sein.

[Laser]

@thomas-braun ein Influx CLI habe ich installiert. Ein Befehl scheint auch zu funktionieren:

otto@neuheizung:~ $ influx config
Active  Name    URL                     Org
*       default http://localhost:8086

allerdings kann ich influxdb immer noch nicht starten.

[Thomas Braun]

@laser

Was läuft da sonst noch so?

Steht in der Langversion von

iob diag

drin. Und lösch da nichts raus oder veränder in irgendeiner Form die Ausgabe!

[Laser]

@thomas-braun

========== Start marking the full check here ===========

```bash
Script v.2024-10-19

*** BASE SYSTEM ***
 Static hostname: neuheizung
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.62+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 17:24:25 up  1:41,  2 users,  load average: 0.80, 0.78, 0.84
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-01-01 17:24:25 CET
           Universal time: Wed 2025-01-01 16:24:25 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
otto
HOME=/home/otto
GROUPS=otto adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        2.2G        4.9G        1.3M        1.2G        6.0G
Swap:           209M          0B        209M
Total:          8.4G        2.2G        5.1G

Active iob-Instances:   32

         7808 M total memory
         2118 M used memory
         2338 M active memory
          687 M inactive memory
         4638 M free memory
           69 M buffer memory
         1105 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 17:24:26 up  1:41,  2 users,  load average: 0.80, 0.78, 0.84
Tasks: 206 total,   1 running, 205 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 20.0 sy,  0.0 ni, 80.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7808.9 total,   4637.0 free,   2119.7 used,   1175.3 buff/cache
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   5689.2 avail Mem

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* influxdb.service loaded failed failed InfluxDB is an open-source, distributed, time series database

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     781M  1.2M  780M   1% /run
/dev/sda2      ext4      110G   16G   89G  15% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/sda1      vfat      510M   65M  446M  13% /boot/firmware
tmpfs          tmpfs     781M     0  781M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Jan  1 15:42:54 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:0D:3B:C5 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=522926e5-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed Jan  1 15:42:58 2025] EXT4-fs (sda2): mounted filesystem 6835594d-a5f3-459f-a244-318060e7e0ab ro with ordered data mode. Quota mode: none.
[Wed Jan  1 15:43:00 2025] EXT4-fs (sda2): re-mounted 6835594d-a5f3-459f-a244-318060e7e0ab r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE    FSTYPE OPTIONS
/                /dev/sda2 ext4   rw,noatime
`-/boot/firmware /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
3.5G    /var/
2.6G    /var/log/journal/dd88a5e009d84a8992e10dbb99d7e583
2.6G    /var/log/journal
2.6G    /var/log
473M    /var/cache

Archived and active journals take up 2.5G in the file system.

/opt/iobroker/backups:
8.0K    /opt/iobroker/backups/
4.0K    /opt/iobroker/backups/influxDB_2023_11_20-10_53_21_backupiobroker

/opt/iobroker/iobroker-data:
5.9G    /opt/iobroker/iobroker-data/
4.7G    /opt/iobroker/iobroker-data/history
1.1G    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
30M     /opt/iobroker/iobroker-data/objects.jsonl
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CCDE649-if00
/dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE82E1IJ-if00-port0
/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyACM0

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.1
/usr/bin/node           v20.18.1
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.4

nodejs:
  Installed: 20.18.1-1nodesource1
  Candidate: 20.18.1-1nodesource1
  Version table:
 *** 20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
debian11            debian11 (version: 4.0.24, hostname: debian11      , dead, uptime: 198)
neuheizung          neuheizung (version: 7.0.6, hostname: neuheizung    , alive, uptime: 6072)

Core adapters versions
js-controller:  7.0.6
admin:          7.1.5
javascript:     8.8.3

nodejs modules from github:     1
+-- iobroker.vedirect@0.3.3 (git+ssh://git@github.com/DrozmotiX/ioBroker.vedirect.git#0a83b8b987ee94d0c49f2ee7299bbb8d5d329dde)

Adapter State
+ system.adapter.admin.1                  : admin                 : neuheizung                               -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : neuheizung                               - disabled
+ system.adapter.backitup.0               : backitup              : neuheizung                               -  enabled
+ system.adapter.discovery.0              : discovery             : neuheizung                               -  enabled
+ system.adapter.echarts.0                : echarts               : neuheizung                               -  enabled
+ system.adapter.email.0                  : email                 : neuheizung                               -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : neuheizung                               -  enabled
  system.adapter.flot.0                   : flot                  : neuheizung                               - disabled
+ system.adapter.history.0                : history               : neuheizung                               -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : neuheizung                               -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : neuheizung                               -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : neuheizung                               -  enabled, port: 0
  system.adapter.i2c.0                    : i2c                   : neuheizung                               - disabled
+ system.adapter.influxdb.0               : influxdb              : neuheizung                               -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : neuheizung                               -  enabled
+ system.adapter.logparser.0              : logparser             : neuheizung                               -  enabled
+ system.adapter.modbus.0                 : modbus                : neuheizung                               -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : neuheizung                               -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : neuheizung                               -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.mqtt.2                   : mqtt                  : neuheizung                               -  enabled, port: 1888, bind: 0.0.0.0
+ system.adapter.mqtt.3                   : mqtt                  : neuheizung                               -  enabled, port: 1890, bind: 0.0.0.0
+ system.adapter.opendtu.0                : opendtu               : neuheizung                               -  enabled
+ system.adapter.opendtu.1                : opendtu               : neuheizung                               -  enabled
+ system.adapter.opendtu.2                : opendtu               : neuheizung                               -  enabled
+ system.adapter.owfs.0                   : owfs                  : neuheizung                               -  enabled, port: 4304
+ system.adapter.rpi2.0                   : rpi2                  : neuheizung                               -  enabled
+ system.adapter.shelly.0                 : shelly                : neuheizung                               -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : neuheizung                               -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : neuheizung                               -  enabled
+ system.adapter.simple-api.0             : simple-api            : neuheizung                               -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.sourceanalytix.0         : sourceanalytix        : neuheizung                               - disabled
+ system.adapter.vedirect.0               : vedirect              : neuheizung                               -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : neuheizung                               -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : neuheizung                               -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : neuheizung                               - disabled
  system.adapter.vis-material.0           : vis-material          : neuheizung                               - disabled
  system.adapter.vis-metro.0              : vis-metro             : neuheizung                               - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : neuheizung                               - disabled
  system.adapter.vis.0                    : vis                   : neuheizung                               -  enabled
+ system.adapter.web.0                    : web                   : neuheizung                               -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : neuheizung                               -  enabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : neuheizung                               -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : neuheizung                               -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : neuheizung                               -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : neuheizung                               -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : neuheizung                               -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.1                   : mqtt                  : neuheizung                               -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.mqtt.2                   : mqtt                  : neuheizung                               -  enabled, port: 1888, bind: 0.0.0.0
+ system.adapter.mqtt.3                   : mqtt                  : neuheizung                               -  enabled, port: 1890, bind: 0.0.0.0
+ system.adapter.owfs.0                   : owfs                  : neuheizung                               -  enabled, port: 4304
+ system.adapter.shelly.0                 : shelly                : neuheizung                               -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : neuheizung                               -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : neuheizung                               -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : neuheizung                               -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : neuheizung                               -  enabled, port: /dev/ttyACM0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.1.5    , installed 7.1.5
Adapter    "alias-manager": 2.0.0    , installed 2.0.0
Adapter    "backitup"     : 3.0.25   , installed 3.0.25
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "email"        : 1.3.1    , installed 1.3.1
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "i2c"          : 1.2.1    , installed 1.2.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "logparser"    : 2.2.2    , installed 2.2.2
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "opendtu"      : 3.1.0    , installed 3.1.0
Adapter    "owfs"         : 0.7.0    , installed 0.7.0
Adapter    "rpi2"         : 2.2.1    , installed 2.2.2
Adapter    "shelly"       : 8.2.1    , installed 8.3.0
Adapter    "shuttercontrol": 1.8.5   , installed 1.8.5
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-material" : 0.1.3    , installed 0.1.3
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.2.5    , installed 6.3.1
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee"       : 1.10.13  , installed 1.10.13

Objects and States
Please stand by - This may take a while
Objects:        4489
States:         3667

*** OS-Repositories and Updates ***
W: https://packages.grafana.com/enterprise/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://packages.grafana.com/enterprise/deb stable InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:6 http://archive.raspberrypi.com/debian bookworm InRelease
Reading package lists...
W: https://packages.grafana.com/enterprise/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.2.54:2001       0.0.0.0:*               LISTEN      1001       8299       1072/io.hm-rpc.1
tcp        0      0 192.168.2.54:2010       0.0.0.0:*               LISTEN      1001       6882       1057/io.hm-rpc.0
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       923        787/iobroker.js-con
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       918        787/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          4572       722/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       7529       1213/io.shelly.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       7570       1250/io.mqtt.0
tcp        0      0 0.0.0.0:1886            0.0.0.0:*               LISTEN      1001       8574       1270/io.mqtt.1
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       7627       1300/io.shelly.1
tcp        0      0 0.0.0.0:1890            0.0.0.0:*               LISTEN      1001       7677       1315/io.mqtt.3
tcp        0      0 0.0.0.0:1888            0.0.0.0:*               LISTEN      1001       9226       1289/io.mqtt.2
tcp6       0      0 :::3000                 :::*                    LISTEN      106        6135       786/grafana
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       9500       1424/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       6745       876/io.admin.1
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       8696       1394/io.simple-api.
tcp6       0      0 :::22                   :::*                    LISTEN      0          4574       722/sshd: /usr/sbin
udp        0      0 0.0.0.0:56980           0.0.0.0:*                           104        625        588/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        623        588/avahi-daemon: r
udp6       0      0 fe80::75d1:70aa:4ea:546 :::*                                0          6578       665/NetworkManager
udp6       0      0 :::42177                :::*                                104        626        588/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        624        588/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-01-01 17:23:21.360  - error: modbus.0 (8223) Request timed out.
2025-01-01 17:23:21.361  - warn: modbus.0 (8223) [DevID_1] Poll error count: 6 code: {"err":"timeout","timeout":5000}
2025-01-01 17:23:25.886  - warn: shelly.0 (1213) [Mqtt.statusNotifications] 192.168.2.13 (shelly1pmminig3 / shelly1pmminig3-543204508220 / shelly1pmminig3#543204508220#1): "General Status Notifications" are disabled (see adapter documentation for details)
2025-01-01 17:23:27.016  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:23:37.021  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:23:41.186  - warn: shelly.0 (1213) [Mqtt.statusNotifications] 192.168.2.13 (shelly1pmminig3 / shelly1pmminig3-543204508220 / shelly1pmminig3#543204508220#1): "General Status Notifications" are disabled (see adapter documentation for details)
2025-01-01 17:23:47.026  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:23:56.423  - warn: shelly.0 (1213) [Mqtt.statusNotifications] 192.168.2.13 (shelly1pmminig3 / shelly1pmminig3-543204508220 / shelly1pmminig3#543204508220#1): "General Status Notifications" are disabled (see adapter documentation for details)
2025-01-01 17:23:57.030  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:24:07.033  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:24:11.720  - warn: shelly.0 (1213) [Mqtt.statusNotifications] 192.168.2.13 (shelly1pmminig3 / shelly1pmminig3-543204508220 / shelly1pmminig3#543204508220#1): "General Status Notifications" are disabled (see adapter documentation for details)
2025-01-01 17:24:17.039  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:24:27.045  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:24:27.046  - warn: shelly.0 (1213) [Mqtt.statusNotifications] 192.168.2.13 (shelly1pmminig3 / shelly1pmminig3-543204508220 / shelly1pmminig3#543204508220#1): "General Status Notifications" are disabled (see adapter documentation for details)
2025-01-01 17:24:27.370  - warn: modbus.0 (8223) Error: undefined
2025-01-01 17:24:27.371  - error: modbus.0 (8223) Request timed out.
2025-01-01 17:24:27.372  - warn: modbus.0 (8223) [DevID_1] Poll error count: 7 code: {"err":"timeout","timeout":5000}
2025-01-01 17:24:37.050  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:24:42.327  - warn: shelly.0 (1213) [Mqtt.statusNotifications] 192.168.2.13 (shelly1pmminig3 / shelly1pmminig3-543204508220 / shelly1pmminig3#543204508220#1): "General Status Notifications" are disabled (see adapter documentation for details)
2025-01-01 17:24:47.055  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:24:57.065  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:25:01.026  - warn: shelly.0 (1213) [Mqtt.statusNotifications] 192.168.2.13 (shelly1pmminig3 / shelly1pmminig3-543204508220 / shelly1pmminig3#543204508220#1): "General Status Notifications" are disabled (see adapter documentation for details)
2025-01-01 17:25:07.075  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:25:17.081  - error: influxdb.0 (7260) AggregateError
2025-01-01 17:25:17.910  - warn: shelly.0 (1213) [Mqtt.statusNotifications] 192.168.2.13 (shelly1pmminig3 / shelly1pmminig3-543204508220 / shelly1pmminig3#543204508220#1): "General Status Notifications" are disabled (see adapter documentation for details)

============ Mark until here for C&P =============

iob diag has finished.

PS: ich habe influxdb mit "autoremove" gelöscht und die 5 Befehlszeilen nochmal ausgeführt. Jetzt:

otto@neuheizung:~ $ apt policy influxdb2
influxdb2:
Installed: (none)
Candidate: (none)
Version table:
2.7.11-1 -1
100 /var/lib/dpkg/status

otto@neuheizung:~ $ sudo apt-get update && sudo apt-get install influxdb2
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://packages.grafana.com/enterprise/deb stable InRelease
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists... Done
W: https://packages.grafana.com/enterprise/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package influxdb2 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'influxdb2' has no installation candidate
otto@neuheizung:~ $

[Thomas Braun]

@laser sagte in InfluxDB installieren wie:

Stell im zigbee-Adapter den richtigen 'by-id'-Link ein, nicht /dev/ttyACM0

HINT:

Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:

/dev/ttyACM0

Der Host 'debian11' muss mal auf Vordermann gebracht werden.

Ich breche hier ab. Kannst du mal aufhören die Ausgabe ständig zu verändern?

[Laser]

@thomas-braun der Host Debian 11 war nur ein Versuchsobjekt. Den gibt es erst mal nicht mehr.
Die Ausgabe habe ich ergänzt, weil ich glaube das es wichtig sein könnte.

[Thomas Braun]

@laser

Ist mir eigentlich jetzt auch egal. Du hast dir jetzt irgendwie das Repo gelöscht.
Also NOCHMAL die 5 Zeilen, mit denen man das richtig anlegt...

[Laser]

@thomas-braun Ich will Dir jetzt auch nicht endlos auf den Nerv gehen. Vermutlich habe ich bei den 5 Zeilen (habe ich mir in ein xx.txt-File kopiert) einen Fehler gemacht. Ich mache das jetzt Alles noch mal, bis es klappt.
die Installation geht doch so: sudo apt-get update && sudo apt-get install influxdb2
die läuft jetzt auch durch. Auch der Status wird ohne Fehler angezeigt.
Es funktioniert jetzt. Kann die GUI port: 8086 öffenen.
Ich hoffe, durch die Neuinstallation ist das Chaos mit den Tokens beseitigt. Deshalb wollte ich das neu haben.
Danke für die Hilfe!

[Laser]

@Thomas-Braun Influx funktioniert, wie es soll. Jetzt versuche ich, von einem anderen PC darauf zu zugreifen. Die GUI öffnet sich, aber meine Anmeldedaten werden nicht akzeptiert. Ist das ein Sicherheitsfeature? Die Konfigurationsdatei(en) zu finden, ist auch ein Abenteuer für sich.