Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1
-
```bash Script v.2024-09-21 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm OS is similar to: debian Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : 32 bit Systemuptime and Load: 20:32:30 up 2:22, 4 users, load average: 0.50, 0.34, 0.30 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian Release codenamed 'buster' reached its END OF LIFE and needs to be updated to the latest stable release 'bookworm' NOW! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2024-12-02 20:32:30 CET Universal time: Mon 2024-12-02 19:32:30 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.1G 5.8G 30M 1.0G 6.5G Swap: 99M 0B 99M Total: 8.0G 1.1G 5.9G Active iob-Instances: 15 7898 M total memory 1051 M used memory 575 M active memory 1282 M inactive memory 5800 M free memory 294 M buffer memory 752 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 20:32:30 up 2:22, 4 users, load average: 0.50, 0.34, 0.30 Tasks: 187 total, 1 running, 185 sleeping, 0 stopped, 1 zombie %Cpu(s): 0.0 us, 4.3 sy, 0.0 ni, 95.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7898.7 total, 5800.8 free, 1050.7 used, 1047.2 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 6533.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * rc-local.service loaded failed failed /etc/rc.local Compatibility * systemd-modules-load.service loaded failed failed Load Kernel Modules LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 12G 17G 41% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 17M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 790M 4.0K 790M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 2 18:09:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1024x768M@60D smsc95xx.macaddr=DC:A6:32:D7:C3:5F vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=1d3550b7-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Dec 2 18:09:32 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Mon Dec 2 18:09:32 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 2 18:09:34 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 333M /var/ 139M /var/lib 86M /var/cache 73M /var/cache/apt 69M /var/lib/apt/lists Archived and active journals take up 16.0M in the file system. /opt/iobroker/backups: 17M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.3G /opt/iobroker/iobroker-data/ 783M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 13M /opt/iobroker/iobroker-data/objects.jsonl 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 8.7M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/838.0aa41cb0.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2435915-if00 /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! *** NodeJS-Installation *** /usr/bin/nodejs v18.20.4 /usr/bin/node v18.20.4 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.4-1nodesource1 Candidate: 18.20.5-1nodesource1 Version table: 18.20.5-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages *** 18.20.4-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.3, hostname: raspberrypi , alive, uptime: 6065) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8080, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.denon.0 : denon : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.fronius.0 : fronius : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.javascript.1 : javascript : raspberrypi - disabled + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pushover.0 : pushover : raspberrypi - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2435915-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8080, bind: 0.0.0.0, run as: admin + system.adapter.lovelace.0 : lovelace : raspberrypi - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2435915-if00 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "fronius" : 2.1.1 , installed 2.1.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.3 , installed 7.0.3 Adapter "lovelace" : 4.1.10 , installed 4.1.10 Adapter "net-tools" : 1.0.11 , installed 1.0.11 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "pvforecast" : 3.0.0 , installed 3.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "systeminfo" : 1.2.0 , installed 1.2.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 3771 States: 2531 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://phoscon.de/apt/deconz buster InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:5 https://dl.yarnpkg.com/debian stable InRelease Hit:6 https://openhab.jfrog.io/artifactory/openhab-linuxpkg stable InRelease Reading package lists... Done Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 22708 543/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17865 576/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 18800 391/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 64023 9689/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 65826 9689/iobroker.js-co tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 19471 541/vncserver-x11-c tcp6 0 0 :::8080 :::* LISTEN 1001 65215 9722/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 64493 10054/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 17867 576/sshd tcp6 0 0 :::8087 :::* LISTEN 1001 67671 10030/io.simple-api tcp6 0 0 :::8091 :::* LISTEN 1001 64460 10006/io.lovelace.0 tcp6 0 0 :::5900 :::* LISTEN 0 19470 541/vncserver-x11-c udp 0 0 0.0.0.0:68 0.0.0.0:* 0 22969 459/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 17629 458/cups-browsed udp 0 0 192.168.1.40:123 0.0.0.0:* 115 21015 575/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 0 17169 575/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 0 17165 575/ntpd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15692 414/avahi-daemon: r udp 0 0 0.0.0.0:48935 0.0.0.0:* 108 15694 414/avahi-daemon: r udp 0 0 0.0.0.0:50000 0.0.0.0:* 0 19682 543/java udp 0 0 0.0.0.0:1900 0.0.0.0:* 0 19916 543/java udp6 0 0 :::123 :::* 0 17162 575/ntpd udp6 0 0 :::5353 :::* 108 15693 414/avahi-daemon: r udp6 0 0 :::43315 :::* 108 15695 414/avahi-daemon: r *** Log File - Last 25 Lines *** -
@thomas-braun said in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
iob nodejs-update
pi@raspberrypi:~ $ iob nodejs-update
Debian 10 'Buster' has reached End of Life and is not supported anymore.
Recent versions of nodejs won't install.
Please install the current Debian Stable
-
@chrischn82 should i have to ?
-
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
Ich habe mehrere 1-Ch-Dimmer vom Typ: QS-Zigbee-D02-TRIAC-LN_1 und bei allen habe ich seit je her das Problem, dass das Stutusupdate für "state" nicht im Objektbaum aktualisiert wird. Die Zigbee-Message ist aber klar:
Taster gedrückt zum einschalten... {"type":"attributeReport","data":{"onOff":1},"linkquality":183,"groupID":null,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":9,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}},"endpoint_id":1} Taster erneut gedrückt zum ausschalten... {"type":"attributeReport","data":{"onOff":0},"linkquality":175,"groupID":null,"cluster":"genOnOff","meta":{"zclTransactionSequenceNumber":10,"manufacturerCode":null,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}},"endpoint_id":1}Die Brightnessänderungen kommen an, State (on/off) leider nicht
Bitte folgende Testen:
- Gerät in die Ausschlussliste eintragen
- Adapter neu starten
- State cleanup durchführen - (der rote button mit den runden Pfeilen)
DP anschauen die es dann gibt.
iob diag
*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.
( habe iobroker fix unmittelbar davor jedoch erfolgreich ausgeführt)Dieses Problem sollte gefixed werden, hat aber wenig bis nichts mit dem Problem der Lonsho Geräte zu tun.
A.
- Gerät in die Ausschlussliste eintragen
-
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
buster
Tot... Und zwar schon geraume Zeit.
Installier da NEU das aktuelle RspberryOS 12 (in der 64Bit-Lite-Version). -
@thomas-braun sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
buster
Tot... Und zwar schon geraume Zeit.
Installier da NEU das aktuelle RspberryOS 12 (in der 64Bit-Lite-Version).Auch hier gilt - das ist etwas welches gefixed werden sollte - hat aber mit dem Zigbee Problem nichts zu tun. @chrischn82 : Wenn Du diesen Weg gehst solltest du das erst einmal komplett durch gehen, und danach einen neuen Thread wegen des Zigbee-Problems aufmachen.
A.
-
@asgothian okay danke, das werde ich morgen durchgehen. Und sonst ggfs. System neu installieren #horrorvorstellung
-
@asgothian sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
Auch hier gilt - das ist etwas welches gefixed werden sollte - hat aber mit dem Zigbee Problem nichts zu tun.
Das hab ich auch nicht behauptet.
Aber es ist nur sinnvoll, sich mit einer noch unterstützten Distribution zu beschäftigen.
Buster ist aber seit 814 Tagen abgekündigt. Zeit das Ding zu beerdigen, das wird nicht wieder lebendiger. -
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
#horrorvorstellung
nope
#happyafter1hour -
@homoran
ich habe ewig viele Zigbeegeräte , skripte und Ha-bridge draufaber unterm Strich wirst du Recht haben..
-
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
ich habe ewig viele Zigbeegeräte , skripte und Ha-bridge drauf
Und ein Backup, welches man dann wieder einspielt.
-
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
@homoran
ich habe ewig viele Zigbeegeräte , skripte und Ha-bridge draufund kein Backup davon?
-
@thomas-braun sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
Das hab ich auch nicht behauptet.
Aber es ist nur sinnvoll, sich mit einer noch unterstützten Distribution zu beschäftigen.
Buster ist aber seit 814 Tagen abgekündigt. Zeit das Ding zu beerdigen, das wird nicht wieder lebendiger.Ist mir klar. Ich wollte nur zum OP klarstellen das es keinen Sinn macht beides parallel zu machen. Entweder Umzug auf RaspberryOS12 und dann das Zigbee Problem angehen oder umgekehrt.
Das der Umzug sinnvoll ist steht da überhaupt nicht zur Debatte - das ist so.
-
Das baut sich ja von 'unten nach oben' auf. Zuerst mal muss das Fundament stehen, dann kannst du an den Ausbau der Zimmer gehen.
-
habe jetzt das neueste PIOS, iobroker per Skript neu und backup rein.
An dem Problem hat sicht nichts geändert. Ein Bug im Converter oder wo mag das herkommen? -
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
habe jetzt das neueste PIOS, iobroker per Skript neu und backup rein.
und, jetzt im Nachhinein? immer noch
@homoran sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
#horrorvorstellung
nope
#happyafter1hourzum eigentlichen Thema wird wahrscheinlich @asgothian jetzt wieder einsteigen können.
Zur Sicherheit aber bitte ein frischesiob diag -
@homoran
War tatsächlich ganz fix erledigt. Habe noch Backups über IOB, von der ganzen SD und von einzelnen Verzeichnissen gemacht. Bis zum Sollzustand hat es ca 4 Std gedauert. Fehlt noch LIRC und ha-bridge wieder installieren... -
frisches iob diag output:
Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: IOBroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.51+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:47:36 up 1 day, 2:53, 4 users, load average: 0.47, 0.19, 0.12 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2024-12-04 20:47:36 CET Universal time: Wed 2024-12-04 19:47:36 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 2.2G 1.3G 31M 4.9G 6.0G Swap: 536M 0B 536M Total: 8.7G 2.2G 1.8G Active iob-Instances: 15 7809 M total memory 2113 M used memory 2799 M active memory 3331 M inactive memory 1217 M free memory 160 M buffer memory 4469 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 20:47:37 up 1 day, 2:53, 4 users, load average: 0.47, 0.19, 0.12 Tasks: 239 total, 1 running, 237 sleeping, 0 stopped, 1 zombie %Cpu(s): 10.0 us, 20.0 sy, 0.0 ni, 70.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7810.0 total, 1216.8 free, 2114.4 used, 4630.7 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 5695.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 781M 1.4M 780M 1% /run /dev/mmcblk0p2 ext4 29G 9.3G 18G 35% / tmpfs tmpfs 3.9G 216K 3.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 67M 444M 14% /boot/firmware tmpfs tmpfs 781M 56K 781M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Dec 3 17:54:27 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:D7:C3:5F vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f8b6782c-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Tue Dec 3 17:54:29 2024] EXT4-fs (mmcblk0p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none. [Tue Dec 3 17:54:31 2024] EXT4-fs (mmcblk0p2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.8G /var/ 576M /var/log/journal/5235c21f508e4dc28f55bed92ff24b79 576M /var/log/journal 576M /var/log 508M /var/cache Archived and active journals take up 575.6M in the file system. /opt/iobroker/backups: 3.4M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 849M /opt/iobroker/iobroker-data/ 772M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 21M /opt/iobroker/iobroker-data/objects.jsonl 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 8.7M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/838.0aa41cb0.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2435915-if00 /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! *** NodeJS-Installation *** /usr/bin/nodejs v20.18.1 /usr/bin/node v20.18.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 20.18.1-1nodesource1 Candidate: 20.18.1-1nodesource1 Version table: *** 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: IOBroker IOBroker (version: 7.0.3, hostname: IOBroker , alive, uptime: 93967) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : IOBroker - enabled, port: 8080, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IOBroker - enabled + system.adapter.backitup.0 : backitup : IOBroker - enabled + system.adapter.denon.0 : denon : IOBroker - enabled system.adapter.devices.0 : devices : IOBroker - disabled system.adapter.discovery.0 : discovery : IOBroker - disabled + system.adapter.fronius.0 : fronius : IOBroker - enabled + system.adapter.history.0 : history : IOBroker - enabled + system.adapter.javascript.0 : javascript : IOBroker - enabled + system.adapter.javascript.1 : javascript : IOBroker - enabled + system.adapter.lovelace.0 : lovelace : IOBroker - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.ping.0 : ping : IOBroker - enabled + system.adapter.pushover.0 : pushover : IOBroker - enabled + system.adapter.simple-api.0 : simple-api : IOBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IOBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : IOBroker - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2435915-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IOBroker - enabled, port: 8080, bind: 0.0.0.0, run as: admin + system.adapter.lovelace.0 : lovelace : IOBroker - enabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.simple-api.0 : simple-api : IOBroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IOBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : IOBroker - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2435915-if00 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "fronius" : 2.1.1 , installed 2.1.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.3 , installed 7.0.3 Adapter "lovelace" : 4.1.10 , installed 4.1.10 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 3812 States: 2558 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3994 715/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 62110 29292/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 62115 29292/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 160920 38349/cupsd tcp6 0 0 :::5900 :::* LISTEN 992 12460 1927/wayvnc tcp6 0 0 :::80 :::* LISTEN 0 73084 31214/java tcp6 0 0 :::22 :::* LISTEN 0 3996 715/sshd: /usr/sbin tcp6 0 0 :::8091 :::* LISTEN 1001 64362 30164/io.lovelace.0 tcp6 0 0 :::8087 :::* LISTEN 1001 66221 30201/io.simple-api tcp6 0 0 :::8082 :::* LISTEN 1001 68887 30450/io.web.0 tcp6 0 0 :::8080 :::* LISTEN 1001 63366 29324/io.admin.0 tcp6 0 0 ::1:631 :::* LISTEN 0 160919 38349/cupsd udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5015 471/avahi-daemon: r udp 0 0 0.0.0.0:39151 0.0.0.0:* 104 5017 471/avahi-daemon: r udp6 0 0 :::45608 :::* 104 5018 471/avahi-daemon: r udp6 0 0 :::50000 :::* 0 70558 31214/java udp6 0 0 :::5353 :::* 0 71479 31214/java udp6 0 0 :::5353 :::* 104 5016 471/avahi-daemon: r udp6 0 0 :::1900 :::* 0 71474 31214/java *** Log File - Last 25 Lines *** -
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
1 zombie
das ist nicht gut!
was man dagegen tut, und warum der da ist, weiss ich leider auch nicht.das wäre noch was
@chrischn82 sagte in Zigbee-Adapter 1.10.3 Lonsonho QS-Zigbee-D02-TRIAC-LN_1:
System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'
Ansonsten seh ich nichts böses
-
Wegen des Zombies: Starte mal sauber durch.
User that called 'iob diag':
pi
Eigentlich ist es mittlerweile vorgesehen, einen individuellen username zu verwenden.
Please set BootTarget to 'multi-user.target'
Ja, tu das.
Und schalt den vnc-Krempel und den Drucker-Server aus...
