NEWS
Vis2 ab morgen im stable
-
@mcm1957 said in Vis2 ab morgen im stable:
Aber ich frag mal bei bluefox explizit nach.
Hier mein Feedback:
Die neueren Versionen (2.10.x) wurden / werden von @Bluefox BEWUSST noch nicht fürs LATEST Repository freigegeben da sie nicht ausreichend getestet / fehlerfrei sind. Wenn jemand beim Testen helfen will, kann er/sie gerne mit Bluefox Kontakt aufnehmen und sich abstimmen ob bzw. wie beim gezielten Testen geholfen werden kann.
-
Hallo dann auch in diesem Fred von meiner Seite
Ich habe mich heute nun den halben Tag schon dusselig gesucht, finde aber irgendwie nicht die richtige Antwort auf meine VIS-2 Frage bzgl. Lizenznutzung, entsprechend also hier (ggf. nochmal):- Habe >30 Views mit der VIS gebaut, deren Migration eine ganze Weile dauern wird. Der Plan wäre nun, zunächst mal mit den Views fürs Smartphone anzufangen.
- Bei der Installation von VIS-2 wurde ich nach meiner Lizenz gefragt. Habe das Häkchen bei 'Lizenzmanager verwenden' gesetzt, worauf mir auch eine meiner beiden Offline-Lizenzen angeboten wurde.
- Soweit so gut, allerdings stelle ich mir nun die Frage, welche meiner beiden Lizenzen denn aktuell eigentlich meine VIS (also nicht VIS-2) genutzt wird?
- Ich habe den Vorgang dann erstmal abgebrochen, um meiner aktuellen VIS nicht die Lebensgrundlage zu entziehen. Früher konnte man deren Lizenz in der Instanz ablesen, was mittlerweile allerdings wohl nicht mehr so ist.
Frage: Wo finde ich die aktuell genutzte Lizenznummer meiner aktuellen VIS?
In der View Systemeinstellung bekomme ich auch beide angezeigt, allerdings mit gleicher UUID. Lediglich die Rechnungsnummer und die winzige Nummer, in der ersten Spalte, unter `iobroker.vis.offline.action´sind unterschiedlich. Plan wäre dann eben beide VIS'sen parallel zu betreiben, bis die ganze Migration abgeschlossen ist.
Danke Euch im Voraus
-
@pedder007
Vis(1) benötigt in der aktuellen Version keine Lizenz mehr. -
@mcm1957 Oh Mann, danke
Das passt natürlich auch dazu, dass die Lizenz in der Instanz nicht mehr zu sehen istEdit:
Ojeojeoje, wenn ich meine Views (mit den 1.000.000 Widgets) nun durch die VIS-2 Brille sehe, ist das Arbeit für die nächsten 5 Jahre -
Hallo
Gibt es aktuell Probleme mit dem "Jäger Design Widget" ?
Habe folgendes Problem :
So soll es aussehen :
und so sieht es aus :
Gruss Sandy
-
@sandy ohne die Angaben von Versionen von vis2 und dem Jäger Adapter wird das schwierig sein zu beantworten. Hast du schon einmal bei vis2 und Jäger nachgesehen ob es passende issues gibt?
-
@feuersturm said in Vis2 ab morgen im stable:
@sandy ohne die Angaben von Versionen von vis2 und dem Jäger Adapter wird das schwierig sein zu beantworten. Hast du schon einmal bei vis2 und Jäger nachgesehen ob es passende issues gibt?
oh, ganz vergessen
Admin : 7.2.6
Node.js : 20.18.0
Vis-2.0 : 2.9.64
vis-2-widget-jaeger Widget : 1.3.1LG Sandy
-
@sandy bei mir genau das gleiche.
Admin: 7.2.0
Node.js: 20.18.0
VIS 2: 2.9.64 und 2.10.7 (hab beide ausprobiert)
vis-2-widget-jaeger Widget : 1.3.1Es scheint bei mir eventuell mit den Vis 2 Energy widgets zusammen zu hängen. Wenn ich beide Widgets in einem View verwende, kommt es zu dem Problem.
Mehr konnte ich bei mir noch nicht herausfinden.
Gruß
SilentM -
@silentm1978
Was kommt in der Konsole bei F12? -
bootstrap.jsx:16 iobroker.vis-2@2.9.64 using theme "dark" Prompt.js:15 ██╗ ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗███████╗██████╗ ██║██╔═══██╗██╔══██╗██╔══██╗██╔═══██╗██║ ██╔╝██╔════╝██╔══██╗ ██║██║ ██║██████╔╝██████╔╝██║ ██║█████╔╝ █████╗ ██████╔╝ ██║██║ ██║██╔══██╗██╔══██╗██║ ██║██╔═██╗ ██╔══╝ ██╔══██╗ ██║╚██████╔╝██████╔╝██║ ██║╚██████╔╝██║ ██╗███████╗██║ ██║ ╚═╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═════╝ ╚═╝ ╚═╝╚══════╝╚═╝ ╚═╝ Prompt.js:16 Nice to see you here! :) Join our dev community here https://github.com/ioBroker/ioBroker or here https://github.com/iobroker-community-adapters Prompt.js:17 Help us to create open source project with reactJS! Prompt.js:18 See you :) console.ts:40 Sentry initialized console.ts:40 Skip script "canvas-gauges" widgets/canvas-gauges/js/gauge.min.js 5console.ts:40 Skip script "canvas-gauges" inline 10console.ts:40 Skip script "colorpicker" inline console.ts:40 Skip script "fancyswitch" widgets/fancyswitch/js/jquery-ui.toggleSwitch.js console.ts:40 Skip script "fancyswitch" widgets/fancyswitch/js/jquery.ibutton.min.js 8console.ts:40 Skip script "fancyswitch" inline console.ts:40 Skip script "google-fonts" inline console.ts:40 Skip script "info" ../adapter/info/lib/js/commons.js console.ts:40 Skip script "info" ../adapter/info/lib/js/popupnews.js console.ts:40 Skip script "info" widgets/info/js/info.js 2console.ts:40 Skip script "info" inline console.ts:40 Skip script "jqplot" widgets/jqplot/js/jquery.jqplot.min.js 2console.ts:40 Skip script "jqplot" inline console.ts:40 Version vis-jqui-mfd: 1.0.12 console.ts:40 Skip script "justgage" widgets/justgage/js/justgage.js 4console.ts:40 Skip script "justgage" inline 3console.ts:40 Skip script "map" inline console.ts:40 Metro version: "1.2.0" console.ts:40 Version vis-plumb: 1.0.0 3console.ts:40 Skip script "swipe" inline console.ts:40 Skip script "weather" widgets/weather/lib/js/lib/jquery.event.drag.js console.ts:40 Skip script "weather" widgets/weather/lib/js/lib/jquery.mousewheel.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.canvaswrapper.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.colorhelpers.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.saturated.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.browser.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.drawSeries.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.uiConstants.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.time.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.legend.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.navigate.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.touchNavigate.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.hover.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.touch.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.selection.js console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.axislabels.js 2console.ts:40 Skip script "weather" inline console.ts:40 Version material: 0.1.5 console.ts:40 Version trashschedule: 3.3.0 console.ts:40 Download the Vue Devtools extension for a better development experience: https://github.com/vuejs/vue-devtools console.ts:40 You are running Vue in development mode. Make sure to turn on production mode when deploying for production. See more tips at https://vuejs.org/guide/deployment.html console.ts:40 Version vis-materialdesign: 0.5.76 console.ts:40 vis-materialdesign: vibration supported by device: 'true' console.ts:40 vis-materialdesign: sentry datapoint 'vis-materialdesign.0.sentry' not exist! Go to the adapter settings to activate it. (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this warning console.ts:40 vis-materialdesign: click audio file '/vis.0/materialdesign-widgets-click-sound.mp3' not exists! (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this warning :8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js:1 Failed to load resource: the server responded with a status of 404 (Not Found)Understand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ChunkLoadError: Loading chunk node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0 failed. (error: http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js) (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {"message":"Loading chunk node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0 failed.\n(error: http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js)","name":"ChunkLoadError","type":"error","request":"http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js"} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ console.ts:40 Show 1 more frame Show lessUnderstand this error console.ts:40 Translate: Write state console.ts:40 Translate: jqui_Close console.ts:40 Translate: jqui_input console.ts:40 Translate: jqui_off console.ts:40 Translate: jqui_on console.ts:40 Translate: Value console.ts:40 Ignored canvas-gauges/tplCGlinearGauge because not used in project console.ts:40 Ignored canvas-gauges/tplCGradialGauge because not used in project console.ts:40 Ignored canvas-gauges/tplCGCompas because not used in project console.ts:40 Ignored canvas-gauges/tplCGflatGauge because not used in project console.ts:40 Ignored colorpicker/tplRGBSpectrum because not used in project console.ts:40 Ignored colorpicker/tplSpectrumHomematic because not used in project console.ts:40 Ignored colorpicker/tplRGBFarbtastic because not used in project console.ts:40 Ignored colorpicker/tplHUEjscolor because not used in project console.ts:40 Ignored colorpicker/tplHUEPickerXY because not used in project console.ts:40 Ignored colorpicker/tplHUEIndicatorXY because not used in project console.ts:40 Ignored colorpicker/tplHUEPickerCT because not used in project console.ts:40 Ignored colorpicker/tplHUEIndicatorCT because not used in project console.ts:40 Ignored colorpicker/tplJscolor because not used in project console.ts:40 Ignored fancyswitch/tplFancySwitch1 because not used in project console.ts:40 Ignored fancyswitch/tplFancySwitch2 because not used in project console.ts:40 Ignored fancyswitch/tplFancyDarkAnAus because not used in project console.ts:40 Ignored fancyswitch/tplFancyDarkAnAusRev because not used in project console.ts:40 Ignored fancyswitch/tplFancyDarkAnAusWippe because not used in project console.ts:40 Ignored fancyswitch/tplFancyGivaIButton because not used in project console.ts:40 Ignored fancyswitch/tplFancyToggleswitch because not used in project console.ts:40 Ignored info/tplInfoMessages because not used in project console.ts:40 Ignored info/tplInfoCalendar because not used in project console.ts:40 Ignored jqplot/tplJqplotGauge because not used in project console.ts:40 Ignored justgage/tplJustgageJustGage because not used in project console.ts:40 Ignored justgage/tplJustgageValueColored because not used in project console.ts:40 Ignored justgage/tplJustgageIndicatorColored because not used in project console.ts:40 Ignored justgage/tplJustgageValueIndicatorColored because not used in project console.ts:40 Ignored map/tplOsm because not used in project console.ts:40 Ignored map/tplGoogleMap because not used in project console.ts:40 Ignored swipe/tplSwipe because not used in project console.ts:40 Ignored swipe/tplCarousel because not used in project console.ts:40 Ignored weather/tplWeatherShowInstance because not used in project console.ts:40 [2024-10-14T17:11:01.744Z] +SUBSCRIBE: ical.0.data.html console.ts:40 [2024-10-14T17:11:01.756Z] +SUBSCRIBE: hm-rpc.0.OEQ0923598.1.STATE console.ts:40 [2024-10-14T17:11:01.761Z] +SUBSCRIBE: hm-rpc.0.OEQ0923572.1.STATE console.ts:40 [2024-10-14T17:11:01.763Z] +SUBSCRIBE: hm-rpc.0.NEQ1158750.1.STATE console.ts:40 [2024-10-14T17:11:01.763Z] +SUBSCRIBE: hm-rpc.0.NEQ1158750.1.LOWBAT console.ts:40 Version vis-hqwidgets: 1.5.1 console.ts:40 [2024-10-14T17:11:01.766Z] +SUBSCRIBE: hm-rpc.0.OEQ1980740.1.STATE console.ts:40 [2024-10-14T17:11:01.771Z] +SUBSCRIBE: hm-rpc.0.OEQ2138145.1.STATE console.ts:40 [2024-10-14T17:11:01.772Z] +SUBSCRIBE: hm-rpc.0.OEQ2138145.1.LOWBAT console.ts:40 [2024-10-14T17:11:01.789Z] +SUBSCRIBE: hm-rpc.0.OEQ0923620.1.STATE console.ts:40 [2024-10-14T17:11:01.791Z] +SUBSCRIBE: hm-rpc.0.OEQ0923542.1.STATE console.ts:40 [2024-10-14T17:11:01.793Z] +SUBSCRIBE: hm-rpc.0.OEQ0924873.1.STATE console.ts:40 [2024-10-14T17:11:01.796Z] +SUBSCRIBE: hm-rpc.0.OEQ0923538.1.STATE console.ts:40 [2024-10-14T17:11:01.799Z] +SUBSCRIBE: tr-064.0.devices.nicogalaxys23plus.active console.ts:40 [2024-10-14T17:11:01.803Z] +SUBSCRIBE: hm-rega.0.22483 console.ts:40 [2024-10-14T17:11:01.805Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.roomtemperature console.ts:40 [2024-10-14T17:11:01.808Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-14T17:11:01.811Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-14T17:11:01.813Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-14T17:11:01.815Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-14T17:11:01.817Z] +SUBSCRIBE: ems-esp.0.system.sensors.temperatures.outdoor_t1 console.ts:40 [2024-10-14T17:11:01.820Z] +SUBSCRIBE: midea.0.20890720963876.status.outdoorTemperature console.ts:40 [2024-10-14T17:11:01.822Z] +SUBSCRIBE: scene.0.Alarm.Einbrecher_Scheinwerfer console.ts:40 [2024-10-14T17:11:01.825Z] +SUBSCRIBE: hm-rpc.1.HmIP-RCV-1.28.PRESS_SHORT console.ts:40 [2024-10-14T17:11:01.831Z] +SUBSCRIBE: iot.0.services.custom_owntracks console.ts:40 [2024-10-14T17:11:01.833Z] +SUBSCRIBE: hm-rpc.0.OEQ0924753.1.STATE console.ts:40 [2024-10-14T17:11:01.836Z] +SUBSCRIBE: hm-rpc.0.OEQ0923521.1.STATE console.ts:40 [2024-10-14T17:11:02.032Z] +SUBSCRIBE: hm-rpc.0.BidCoS-RF.8.PRESS_SHORT console.ts:40 [2024-10-14T17:11:02.079Z] +SUBSCRIBE: tr-064.0.devices.Nico-Galaxy-S22.active console.ts:40 Version vis-timeandweather: 1.2.1 query.yahooapis.com/v1/public/yql?q=select%20*%20from%20weather.forecast%20where%20woeid%20in%20(%27664942%27)%20and%20u%3D%27c%27&rnd=20249119&format=json&callback=jQuery111203023413300950646_1728925857508&_=1728925857509:1 Failed to load resource: net::ERR_NAME_NOT_RESOLVEDUnderstand this error console.ts:40 vis-materialdesign: theme default 'colors' (light) successfully bound to css variables console.ts:40 vis-materialdesign: theme 'colors' (light) successfully bound to css variables console.ts:40 vis-materialdesign: theme default 'fonts' successfully bound to css variables console.ts:40 vis-materialdesign: theme 'fonts' successfully bound to css variables console.ts:40 vis-materialdesign: theme default 'font-sizes' successfully bound to css variables console.ts:40 vis-materialdesign: theme 'font-sizes' successfully bound to css variables console.ts:40 Translate: Please define states console.ts:40 Translate: Select object ID console.ts:40 [2024-10-14T17:11:04.423Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.SET_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.425Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.VALVE_STATE console.ts:40 [2024-10-14T17:11:04.430Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.SET_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.431Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.VALVE_STATE console.ts:40 [2024-10-14T17:11:04.433Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.SET_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.435Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.VALVE_STATE console.ts:40 [2024-10-14T17:11:04.440Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.442Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.SET_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.474Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.SET_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.525Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.VALVE_STATE console.ts:40 [2024-10-14T17:11:04.529Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.SET_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.530Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.537Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.CONTROL_MODE console.ts:40 [2024-10-14T17:11:04.540Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.CONTROL_MODE console.ts:40 [2024-10-14T17:11:04.543Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.CONTROL_MODE console.ts:40 [2024-10-14T17:11:04.545Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.CONTROL_MODE console.ts:40 [2024-10-14T17:11:04.551Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.VALVE_STATE console.ts:40 [2024-10-14T17:11:04.556Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.VALVE_STATE console.ts:40 [2024-10-14T17:11:04.559Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.SET_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.561Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.VALVE_STATE console.ts:40 [2024-10-14T17:11:04.563Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.565Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.VALVE_STATE console.ts:40 [2024-10-14T17:11:04.568Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.SET_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.570Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-14T17:11:04.573Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.CONTROL_MODE console.ts:40 [2024-10-14T17:11:04.575Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.CONTROL_MODE console.ts:40 [2024-10-14T17:11:04.576Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.CONTROL_MODE console.ts:40 [2024-10-14T17:11:04.578Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.CONTROL_MODE console.ts:40 [2024-10-14T17:11:04.579Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.manualRoomSetpoint console.ts:40 [2024-10-14T17:11:04.580Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.pumpModulation console.ts:40 [2024-10-14T17:11:04.584Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.operationMode console.ts:40 [2024-10-14T17:11:04.650Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Bett.POWER console.ts:40 [2024-10-14T17:11:04.652Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Flur.POWER console.ts:40 [2024-10-14T17:11:04.653Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Esszimmer.POWER console.ts:40 [2024-10-14T17:11:04.821Z] +SUBSCRIBE: sonoff.0.Tosmota_Heizlüfter_unten.POWER console.ts:40 [2024-10-14T17:11:04.823Z] +SUBSCRIBE: shelly.0.shellyplus1pm#fcb467a687c0#1.Relay0.Switch :8082/vis-2/?Nico#Heizung:1 Uncaught (in promise) Understand this error
Mod-Edit: Code/Log in Code Tags gepackt. Bitte benutzt die Code Tags Funktion -> </>
Hier gehts zur Hilfe. -
@sandy sagte in Vis2 ab morgen im stable:
:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js:1 Failed to load resource: the server responded with a status of 404 (Not Found)Understand this error
ok, datei ist wohl nicht da.
dann bitte auf der konsoleiobroker upload all
damit werden alle dateien neu beim web server registriert.
-
@oliverio said in Vis2 ab morgen im stable:
iobroker upload all
Guten Morgen.
Habe "iobroker upload all" gemacht aber es besteht immer noch der selbe Fehler
iobroker.vis-2@2.9.64 using theme "dark" ██╗ ██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗███████╗██████╗ ██║██╔═══██╗██╔══██╗██╔══██╗██╔═══██╗██║ ██╔╝██╔════╝██╔══██╗ ██║██║ ██║██████╔╝██████╔╝██║ ██║█████╔╝ █████╗ ██████╔╝ ██║██║ ██║██╔══██╗██╔══██╗██║ ██║██╔═██╗ ██╔══╝ ██╔══██╗ ██║╚██████╔╝██████╔╝██║ ██║╚██████╔╝██║ ██╗███████╗██║ ██║ ╚═╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═════╝ ╚═╝ ╚═╝╚══════╝╚═╝ ╚═╝ Nice to see you here! :) Join our dev community here https://github.com/ioBroker/ioBroker or here https://github.com/iobroker-community-adapters Help us to create open source project with reactJS! See you :) Sentry initialized Skip script "canvas-gauges" widgets/canvas-gauges/js/gauge.min.js 5 Skip script "canvas-gauges" inline 10 Skip script "colorpicker" inline Skip script "fancyswitch" widgets/fancyswitch/js/jquery-ui.toggleSwitch.js Skip script "fancyswitch" widgets/fancyswitch/js/jquery.ibutton.min.js 8 Skip script "fancyswitch" inline Skip script "google-fonts" inline Skip script "info" ../adapter/info/lib/js/commons.js Skip script "info" ../adapter/info/lib/js/popupnews.js Skip script "info" widgets/info/js/info.js 2 Skip script "info" inline Skip script "jqplot" widgets/jqplot/js/jquery.jqplot.min.js 2 Skip script "jqplot" inline Version vis-jqui-mfd: 1.0.12 Skip script "justgage" widgets/justgage/js/justgage.js 4 Skip script "justgage" inline 3 Skip script "map" inline Metro version: "1.2.0" Version vis-plumb: 1.0.0 3 Skip script "swipe" inline Skip script "weather" widgets/weather/lib/js/lib/jquery.event.drag.js Skip script "weather" widgets/weather/lib/js/lib/jquery.mousewheel.js Skip script "weather" widgets/weather/lib/js/flot/jquery.canvaswrapper.js Skip script "weather" widgets/weather/lib/js/flot/jquery.colorhelpers.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.saturated.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.browser.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.drawSeries.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.uiConstants.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.time.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.legend.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.navigate.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.touchNavigate.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.hover.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.touch.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.selection.js Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.axislabels.js 2 Skip script "weather" inline Version material: 0.1.5 Version trashschedule: 3.3.0 Download the Vue Devtools extension for a better development experience: https://github.com/vuejs/vue-devtools You are running Vue in development mode. Make sure to turn on production mode when deploying for production. See more tips at https://vuejs.org/guide/deployment.html Version vis-materialdesign: 0.5.76 vis-materialdesign: vibration supported by device: 'true' vis-materialdesign: sentry datapoint 'vis-materialdesign.0.sentry' not exist! Go to the adapter settings to activate it. (anonymous) @ main.8e80ccb0.js:2Understand this warning vis-materialdesign: click audio file '/vis.0/materialdesign-widgets-click-sound.mp3' not exists! (anonymous) @ main.8e80ccb0.js:2Understand this warning :8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js:1 Failed to load resource: the server responded with a status of 404 (Not Found)Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ChunkLoadError: Loading chunk node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0 failed. (error: http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js) (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {"message":"Loading chunk node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0 failed.\n(error: http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js)","name":"ChunkLoadError","type":"error","request":"http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js"} (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization (anonymous) @ main.8e80ccb0.js:2Understand this error Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {} (anonymous) @ main.8e80ccb0.js:2Understand this error Translate: Write state Translate: jqui_Close Translate: jqui_input Translate: jqui_off Translate: jqui_on Translate: Value Ignored canvas-gauges/tplCGlinearGauge because not used in project Ignored canvas-gauges/tplCGradialGauge because not used in project Ignored canvas-gauges/tplCGCompas because not used in project Ignored canvas-gauges/tplCGflatGauge because not used in project Ignored colorpicker/tplRGBSpectrum because not used in project Ignored colorpicker/tplSpectrumHomematic because not used in project Ignored colorpicker/tplRGBFarbtastic because not used in project Ignored colorpicker/tplHUEjscolor because not used in project Ignored colorpicker/tplHUEPickerXY because not used in project Ignored colorpicker/tplHUEIndicatorXY because not used in project Ignored colorpicker/tplHUEPickerCT because not used in project Ignored colorpicker/tplHUEIndicatorCT because not used in project Ignored colorpicker/tplJscolor because not used in project Ignored fancyswitch/tplFancySwitch1 because not used in project Ignored fancyswitch/tplFancySwitch2 because not used in project Ignored fancyswitch/tplFancyDarkAnAus because not used in project Ignored fancyswitch/tplFancyDarkAnAusRev because not used in project Ignored fancyswitch/tplFancyDarkAnAusWippe because not used in project Ignored fancyswitch/tplFancyGivaIButton because not used in project Ignored fancyswitch/tplFancyToggleswitch because not used in project Ignored info/tplInfoMessages because not used in project Ignored info/tplInfoCalendar because not used in project Ignored jqplot/tplJqplotGauge because not used in project Ignored justgage/tplJustgageJustGage because not used in project Ignored justgage/tplJustgageValueColored because not used in project Ignored justgage/tplJustgageIndicatorColored because not used in project Ignored justgage/tplJustgageValueIndicatorColored because not used in project Ignored map/tplOsm because not used in project Ignored map/tplGoogleMap because not used in project Ignored swipe/tplSwipe because not used in project Ignored swipe/tplCarousel because not used in project Ignored weather/tplWeatherShowInstance because not used in project [2024-10-15T06:16:18.555Z] +SUBSCRIBE: ical.0.data.html [2024-10-15T06:16:18.562Z] +SUBSCRIBE: hm-rpc.0.OEQ0923598.1.STATE [2024-10-15T06:16:18.565Z] +SUBSCRIBE: hm-rpc.0.OEQ0923572.1.STATE [2024-10-15T06:16:18.567Z] +SUBSCRIBE: hm-rpc.0.NEQ1158750.1.STATE console.ts:40 [2024-10-15T06:16:18.567Z] +SUBSCRIBE: hm-rpc.0.NEQ1158750.1.LOWBAT console.ts:40 Version vis-hqwidgets: 1.5.1 console.ts:40 [2024-10-15T06:16:18.569Z] +SUBSCRIBE: hm-rpc.0.OEQ1980740.1.STATE console.ts:40 [2024-10-15T06:16:18.571Z] +SUBSCRIBE: hm-rpc.0.OEQ2138145.1.STATE console.ts:40 [2024-10-15T06:16:18.571Z] +SUBSCRIBE: hm-rpc.0.OEQ2138145.1.LOWBAT console.ts:40 [2024-10-15T06:16:18.586Z] +SUBSCRIBE: hm-rpc.0.OEQ0923620.1.STATE console.ts:40 [2024-10-15T06:16:18.588Z] +SUBSCRIBE: hm-rpc.0.OEQ0923542.1.STATE console.ts:40 [2024-10-15T06:16:18.590Z] +SUBSCRIBE: hm-rpc.0.OEQ0924873.1.STATE console.ts:40 [2024-10-15T06:16:18.591Z] +SUBSCRIBE: hm-rpc.0.OEQ0923538.1.STATE console.ts:40 [2024-10-15T06:16:18.592Z] +SUBSCRIBE: tr-064.0.devices.nicogalaxys23plus.active console.ts:40 [2024-10-15T06:16:18.595Z] +SUBSCRIBE: hm-rega.0.22483 console.ts:40 [2024-10-15T06:16:18.596Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.roomtemperature console.ts:40 [2024-10-15T06:16:18.597Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-15T06:16:18.598Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-15T06:16:18.599Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-15T06:16:18.600Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-15T06:16:18.601Z] +SUBSCRIBE: ems-esp.0.system.sensors.temperatures.outdoor_t1 console.ts:40 [2024-10-15T06:16:18.603Z] +SUBSCRIBE: midea.0.20890720963876.status.outdoorTemperature console.ts:40 [2024-10-15T06:16:18.605Z] +SUBSCRIBE: scene.0.Alarm.Einbrecher_Scheinwerfer console.ts:40 [2024-10-15T06:16:18.606Z] +SUBSCRIBE: hm-rpc.1.HmIP-RCV-1.28.PRESS_SHORT console.ts:40 [2024-10-15T06:16:18.609Z] +SUBSCRIBE: iot.0.services.custom_owntracks console.ts:40 [2024-10-15T06:16:18.610Z] +SUBSCRIBE: hm-rpc.0.OEQ0924753.1.STATE console.ts:40 [2024-10-15T06:16:18.612Z] +SUBSCRIBE: hm-rpc.0.OEQ0923521.1.STATE console.ts:40 [2024-10-15T06:16:18.637Z] +SUBSCRIBE: hm-rpc.0.BidCoS-RF.8.PRESS_SHORT console.ts:40 [2024-10-15T06:16:18.675Z] +SUBSCRIBE: tr-064.0.devices.Nico-Galaxy-S22.active console.ts:40 Version vis-timeandweather: 1.2.1 query.yahooapis.com/v1/public/yql?q=select%20*%20from%20weather.forecast%20where%20woeid%20in%20(%27664942%27)%20and%20u%3D%27c%27&rnd=2024928&format=json&callback=jQuery111201235079405990629_1728972974104&_=1728972974105:1 Failed to load resource: net::ERR_NAME_NOT_RESOLVEDUnderstand this error console.ts:40 vis-materialdesign: theme default 'colors' (light) successfully bound to css variables console.ts:40 vis-materialdesign: theme 'colors' (light) successfully bound to css variables console.ts:40 vis-materialdesign: theme default 'fonts' successfully bound to css variables console.ts:40 vis-materialdesign: theme 'fonts' successfully bound to css variables console.ts:40 vis-materialdesign: theme default 'font-sizes' successfully bound to css variables console.ts:40 vis-materialdesign: theme 'font-sizes' successfully bound to css variables console.ts:40 Translate: Please define states console.ts:40 Translate: Select object ID console.ts:40 [2024-10-15T06:16:24.043Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.SET_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.044Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.VALVE_STATE console.ts:40 [2024-10-15T06:16:24.050Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.SET_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.052Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.VALVE_STATE console.ts:40 [2024-10-15T06:16:24.055Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.SET_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.057Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.VALVE_STATE console.ts:40 [2024-10-15T06:16:24.060Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.062Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.SET_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.090Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.SET_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.148Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.VALVE_STATE console.ts:40 [2024-10-15T06:16:24.150Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.SET_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.152Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.155Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.CONTROL_MODE console.ts:40 [2024-10-15T06:16:24.158Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.CONTROL_MODE console.ts:40 [2024-10-15T06:16:24.159Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.CONTROL_MODE console.ts:40 [2024-10-15T06:16:24.161Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.CONTROL_MODE console.ts:40 [2024-10-15T06:16:24.167Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.VALVE_STATE console.ts:40 [2024-10-15T06:16:24.173Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.VALVE_STATE console.ts:40 [2024-10-15T06:16:24.176Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.SET_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.178Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.VALVE_STATE console.ts:40 [2024-10-15T06:16:24.180Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.185Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.VALVE_STATE console.ts:40 [2024-10-15T06:16:24.188Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.SET_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.190Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.ACTUAL_TEMPERATURE console.ts:40 [2024-10-15T06:16:24.192Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.CONTROL_MODE console.ts:40 [2024-10-15T06:16:24.194Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.CONTROL_MODE console.ts:40 [2024-10-15T06:16:24.196Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.CONTROL_MODE console.ts:40 [2024-10-15T06:16:24.199Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.CONTROL_MODE console.ts:40 [2024-10-15T06:16:24.202Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.manualRoomSetpoint console.ts:40 [2024-10-15T06:16:24.203Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.pumpModulation console.ts:40 [2024-10-15T06:16:24.206Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.operationMode console.ts:40 [2024-10-15T06:16:24.261Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Bett.POWER console.ts:40 [2024-10-15T06:16:24.262Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Flur.POWER console.ts:40 [2024-10-15T06:16:24.264Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Esszimmer.POWER console.ts:40 [2024-10-15T06:16:24.308Z] +SUBSCRIBE: sonoff.0.Tosmota_Heizlüfter_unten.POWER console.ts:40 [2024-10-15T06:16:24.309Z] +SUBSCRIBE: shelly.0.shellyplus1pm#fcb467a687c0#1.Relay0.Switch :8082/vis-2/?Nico#Heizung:1 Uncaught (in promise) Error: A listener indicated an asynchronous response by returning true, but the message channel closed before a response was receivedUnderstand this error
-
@sandy dann diesen Adapter neu inst
-
@oliverio habe jetzt den Adapter gelöscht und neu installiert aber das Problem ist immer noch das selbe
Weiß schon gar nicht mehr was ich noch machen soll
LG Sandy
-
@sandy
Browser Cache mal komplett geleert und System neu gestartet? -
habe ich gerade gemacht, leider ohne Erfolg.
Das ich die Lizenz nicht gekauft habe hat damit ja nichts zu tun oder ? Sie lief ja auch ohne das ich sie gekauft habe seit Monaten.
-
für privat ist die vis-2 lizenz kostenlos
du musst dich nur auf der iobroker seite einloggen oder registrieren und dann bekommst du die lizenz über den lizenz reiter
https://iobroker.netdas jaeger-design kostet allerdings was. ob nur für kommerziell oder auch für privat weiß ich allerdings nicht. ist aber closed source, daher kann da wirklich nur der author helfen.
-
@sandy "iobroker upload all" hat bei mir zum Erfolg geführt. Der Adapter funktioniert jetzt wieder.
-
Hallo
Wollte gerade am Zweitsystem (Test) die Lizenz für Vis-2 aktivieren.
Aber auf iobroker.net kann ich keine neue Lizenz kaufen.
Unter "Lizenzen" seh ich nur die vom Hauptsystem.
Ist für ein Zweitsystem ein eigener User auf iobroker.net nötig?
-
@silentm1978 sagte in Vis2 ab morgen im stable:
iobroker upload all
hat sie wohl gemacht, aber ohne erfolg.
wenn ich mir die fehlermeldungen aus der browser console so anschaue, dann sind da noch andere sachen seltsam, die man sich mal anschauen mussCannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
oder
Failed to load resource: net::ERR_NAME_NOT_RESOLVEDUnderstand this error
wer da der verursacher ist, weiß ich nicht.
x sieht aber nicht nach iobroker aus.