Vis2 ab 09.01.2024 im stable

OliverIO

@sigi234
So ging es mir auch.
Aber stellt hier gerade einiges, auch in Widgets um.
Es kann sein das er noch nicht ganz fertig ist.
Warum er dann releases macht ist mir nicht klar. Kann aber auch zum Testen sein. Bei react muss der Dev kompilieren und der Integrationstest kann am besten durch Installation einesnpackages erfolgen

mcm1957

@mcm1957 said in Vis2 ab morgen im stable:

Aber ich frag mal bei bluefox explizit nach.

Hier mein Feedback:

Die neueren Versionen (2.10.x) wurden / werden von @Bluefox BEWUSST noch nicht fürs LATEST Repository freigegeben da sie nicht ausreichend getestet / fehlerfrei sind. Wenn jemand beim Testen helfen will, kann er/sie gerne mit Bluefox Kontakt aufnehmen und sich abstimmen ob bzw. wie beim gezielten Testen geholfen werden kann.

Pedder007

Hallo dann auch in diesem Fred von meiner Seite :-)
Ich habe mich heute nun den halben Tag schon dusselig gesucht, finde aber irgendwie nicht die richtige Antwort auf meine VIS-2 Frage bzgl. Lizenznutzung, entsprechend also hier (ggf. nochmal):

Habe >30 Views mit der VIS gebaut, deren Migration eine ganze Weile dauern wird. Der Plan wäre nun, zunächst mal mit den Views fürs Smartphone anzufangen.
Bei der Installation von VIS-2 wurde ich nach meiner Lizenz gefragt. Habe das Häkchen bei 'Lizenzmanager verwenden' gesetzt, worauf mir auch eine meiner beiden Offline-Lizenzen angeboten wurde.
Soweit so gut, allerdings stelle ich mir nun die Frage, welche meiner beiden Lizenzen denn aktuell eigentlich meine VIS (also nicht VIS-2) genutzt wird?
Ich habe den Vorgang dann erstmal abgebrochen, um meiner aktuellen VIS nicht die Lebensgrundlage zu entziehen. Früher konnte man deren Lizenz in der Instanz ablesen, was mittlerweile allerdings wohl nicht mehr so ist.

Frage: Wo finde ich die aktuell genutzte Lizenznummer meiner aktuellen VIS?

In der View Systemeinstellung bekomme ich auch beide angezeigt, allerdings mit gleicher UUID. Lediglich die Rechnungsnummer und die winzige Nummer, in der ersten Spalte, unter `iobroker.vis.offline.action´sind unterschiedlich. Plan wäre dann eben beide VIS'sen parallel zu betreiben, bis die ganze Migration abgeschlossen ist.

Danke Euch im Voraus :-)

mcm1957

@pedder007
Vis(1) benötigt in der aktuellen Version keine Lizenz mehr.

Pedder007

@mcm1957 Oh Mann, danke :+1:
Das passt natürlich auch dazu, dass die Lizenz in der Instanz nicht mehr zu sehen ist :face_with_rolling_eyes:

Edit:
Ojeojeoje, wenn ich meine Views (mit den 1.000.000 Widgets) nun durch die VIS-2 Brille sehe, ist das Arbeit für die nächsten 5 Jahre :laughing:

Sandy

Hallo

Gibt es aktuell Probleme mit dem "Jäger Design Widget" ?

Habe folgendes Problem :

So soll es aussehen :

Screenshot 2024-10-13 101623.jpg

und so sieht es aus :

Screenshot 2024-10-13 101820.png

Gruss Sandy

Feuersturm

@sandy ohne die Angaben von Versionen von vis2 und dem Jäger Adapter wird das schwierig sein zu beantworten. Hast du schon einmal bei vis2 und Jäger nachgesehen ob es passende issues gibt?

Sandy

@feuersturm said in Vis2 ab morgen im stable:

@sandy ohne die Angaben von Versionen von vis2 und dem Jäger Adapter wird das schwierig sein zu beantworten. Hast du schon einmal bei vis2 und Jäger nachgesehen ob es passende issues gibt?

oh, ganz vergessen :-(

Admin : 7.2.6
Node.js : 20.18.0
Vis-2.0 : 2.9.64
vis-2-widget-jaeger Widget : 1.3.1

LG Sandy

SilentM1978

@sandy bei mir genau das gleiche.

Admin: 7.2.0
Node.js: 20.18.0
VIS 2: 2.9.64 und 2.10.7 (hab beide ausprobiert)
vis-2-widget-jaeger Widget : 1.3.1

Es scheint bei mir eventuell mit den Vis 2 Energy widgets zusammen zu hängen. Wenn ich beide Widgets in einem View verwende, kommt es zu dem Problem.
Mehr konnte ich bei mir noch nicht herausfinden.
Gruß
SilentM

sigi234

@silentm1978
Was kommt in der Konsole bei F12?

Sandy

@sigi234

bootstrap.jsx:16 iobroker.vis-2@2.9.64 using theme "dark"
Prompt.js:15 
██╗ ██████╗ ██████╗ ██████╗  ██████╗ ██╗  ██╗███████╗██████╗ 
██║██╔═══██╗██╔══██╗██╔══██╗██╔═══██╗██║ ██╔╝██╔════╝██╔══██╗
██║██║   ██║██████╔╝██████╔╝██║   ██║█████╔╝ █████╗  ██████╔╝
██║██║   ██║██╔══██╗██╔══██╗██║   ██║██╔═██╗ ██╔══╝  ██╔══██╗
██║╚██████╔╝██████╔╝██║  ██║╚██████╔╝██║  ██╗███████╗██║  ██║
╚═╝ ╚═════╝ ╚═════╝ ╚═╝  ╚═╝ ╚═════╝ ╚═╝  ╚═╝╚══════╝╚═╝  ╚═╝

Prompt.js:16 Nice to see you here! :) Join our dev community here https://github.com/ioBroker/ioBroker or here https://github.com/iobroker-community-adapters
Prompt.js:17 Help us to create open source project with reactJS!
Prompt.js:18 See you :)
console.ts:40 Sentry initialized
console.ts:40 Skip script "canvas-gauges" widgets/canvas-gauges/js/gauge.min.js
5console.ts:40 Skip script "canvas-gauges" inline
10console.ts:40 Skip script "colorpicker" inline
console.ts:40 Skip script "fancyswitch" widgets/fancyswitch/js/jquery-ui.toggleSwitch.js
console.ts:40 Skip script "fancyswitch" widgets/fancyswitch/js/jquery.ibutton.min.js
8console.ts:40 Skip script "fancyswitch" inline
console.ts:40 Skip script "google-fonts" inline
console.ts:40 Skip script "info" ../adapter/info/lib/js/commons.js
console.ts:40 Skip script "info" ../adapter/info/lib/js/popupnews.js
console.ts:40 Skip script "info" widgets/info/js/info.js
2console.ts:40 Skip script "info" inline
console.ts:40 Skip script "jqplot" widgets/jqplot/js/jquery.jqplot.min.js
2console.ts:40 Skip script "jqplot" inline
console.ts:40 Version vis-jqui-mfd: 1.0.12
console.ts:40 Skip script "justgage" widgets/justgage/js/justgage.js
4console.ts:40 Skip script "justgage" inline
3console.ts:40 Skip script "map" inline
console.ts:40 Metro version: "1.2.0"
console.ts:40 Version vis-plumb: 1.0.0
3console.ts:40 Skip script "swipe" inline
console.ts:40 Skip script "weather" widgets/weather/lib/js/lib/jquery.event.drag.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/lib/jquery.mousewheel.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.canvaswrapper.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.colorhelpers.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.saturated.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.browser.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.drawSeries.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.uiConstants.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.time.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.legend.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.navigate.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.touchNavigate.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.hover.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.touch.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.selection.js
console.ts:40 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.axislabels.js
2console.ts:40 Skip script "weather" inline
console.ts:40 Version material: 0.1.5
console.ts:40 Version trashschedule: 3.3.0
console.ts:40 Download the Vue Devtools extension for a better development experience:
https://github.com/vuejs/vue-devtools
console.ts:40 You are running Vue in development mode.
Make sure to turn on production mode when deploying for production.
See more tips at https://vuejs.org/guide/deployment.html
console.ts:40 Version vis-materialdesign: 0.5.76
console.ts:40 vis-materialdesign: vibration supported by device: 'true'
console.ts:40 vis-materialdesign: sentry datapoint 'vis-materialdesign.0.sentry' not exist! Go to the adapter settings to activate it.
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this warning
console.ts:40 vis-materialdesign: click audio file '/vis.0/materialdesign-widgets-click-sound.mp3' not exists!
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this warning
:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js:1 
        
        
       Failed to load resource: the server responded with a status of 404 (Not Found)Understand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ChunkLoadError: Loading chunk node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0 failed.
(error: http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js)
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {"message":"Loading chunk node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0 failed.\n(error: http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js)","name":"ChunkLoadError","type":"error","request":"http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js"}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ console.ts:40
Show 1 more frame
Show lessUnderstand this error
console.ts:40 Translate: Write state
console.ts:40 Translate: jqui_Close
console.ts:40 Translate: jqui_input
console.ts:40 Translate: jqui_off
console.ts:40 Translate: jqui_on
console.ts:40 Translate: Value
console.ts:40 Ignored canvas-gauges/tplCGlinearGauge because not used in project
console.ts:40 Ignored canvas-gauges/tplCGradialGauge because not used in project
console.ts:40 Ignored canvas-gauges/tplCGCompas because not used in project
console.ts:40 Ignored canvas-gauges/tplCGflatGauge because not used in project
console.ts:40 Ignored colorpicker/tplRGBSpectrum because not used in project
console.ts:40 Ignored colorpicker/tplSpectrumHomematic because not used in project
console.ts:40 Ignored colorpicker/tplRGBFarbtastic because not used in project
console.ts:40 Ignored colorpicker/tplHUEjscolor because not used in project
console.ts:40 Ignored colorpicker/tplHUEPickerXY because not used in project
console.ts:40 Ignored colorpicker/tplHUEIndicatorXY because not used in project
console.ts:40 Ignored colorpicker/tplHUEPickerCT because not used in project
console.ts:40 Ignored colorpicker/tplHUEIndicatorCT because not used in project
console.ts:40 Ignored colorpicker/tplJscolor because not used in project
console.ts:40 Ignored fancyswitch/tplFancySwitch1 because not used in project
console.ts:40 Ignored fancyswitch/tplFancySwitch2 because not used in project
console.ts:40 Ignored fancyswitch/tplFancyDarkAnAus because not used in project
console.ts:40 Ignored fancyswitch/tplFancyDarkAnAusRev because not used in project
console.ts:40 Ignored fancyswitch/tplFancyDarkAnAusWippe because not used in project
console.ts:40 Ignored fancyswitch/tplFancyGivaIButton because not used in project
console.ts:40 Ignored fancyswitch/tplFancyToggleswitch because not used in project
console.ts:40 Ignored info/tplInfoMessages because not used in project
console.ts:40 Ignored info/tplInfoCalendar because not used in project
console.ts:40 Ignored jqplot/tplJqplotGauge because not used in project
console.ts:40 Ignored justgage/tplJustgageJustGage because not used in project
console.ts:40 Ignored justgage/tplJustgageValueColored because not used in project
console.ts:40 Ignored justgage/tplJustgageIndicatorColored because not used in project
console.ts:40 Ignored justgage/tplJustgageValueIndicatorColored because not used in project
console.ts:40 Ignored map/tplOsm because not used in project
console.ts:40 Ignored map/tplGoogleMap because not used in project
console.ts:40 Ignored swipe/tplSwipe because not used in project
console.ts:40 Ignored swipe/tplCarousel because not used in project
console.ts:40 Ignored weather/tplWeatherShowInstance because not used in project
console.ts:40 [2024-10-14T17:11:01.744Z] +SUBSCRIBE: ical.0.data.html
console.ts:40 [2024-10-14T17:11:01.756Z] +SUBSCRIBE: hm-rpc.0.OEQ0923598.1.STATE
console.ts:40 [2024-10-14T17:11:01.761Z] +SUBSCRIBE: hm-rpc.0.OEQ0923572.1.STATE
console.ts:40 [2024-10-14T17:11:01.763Z] +SUBSCRIBE: hm-rpc.0.NEQ1158750.1.STATE
console.ts:40 [2024-10-14T17:11:01.763Z] +SUBSCRIBE: hm-rpc.0.NEQ1158750.1.LOWBAT
console.ts:40 Version vis-hqwidgets: 1.5.1
console.ts:40 [2024-10-14T17:11:01.766Z] +SUBSCRIBE: hm-rpc.0.OEQ1980740.1.STATE
console.ts:40 [2024-10-14T17:11:01.771Z] +SUBSCRIBE: hm-rpc.0.OEQ2138145.1.STATE
console.ts:40 [2024-10-14T17:11:01.772Z] +SUBSCRIBE: hm-rpc.0.OEQ2138145.1.LOWBAT
console.ts:40 [2024-10-14T17:11:01.789Z] +SUBSCRIBE: hm-rpc.0.OEQ0923620.1.STATE
console.ts:40 [2024-10-14T17:11:01.791Z] +SUBSCRIBE: hm-rpc.0.OEQ0923542.1.STATE
console.ts:40 [2024-10-14T17:11:01.793Z] +SUBSCRIBE: hm-rpc.0.OEQ0924873.1.STATE
console.ts:40 [2024-10-14T17:11:01.796Z] +SUBSCRIBE: hm-rpc.0.OEQ0923538.1.STATE
console.ts:40 [2024-10-14T17:11:01.799Z] +SUBSCRIBE: tr-064.0.devices.nicogalaxys23plus.active
console.ts:40 [2024-10-14T17:11:01.803Z] +SUBSCRIBE: hm-rega.0.22483
console.ts:40 [2024-10-14T17:11:01.805Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.roomtemperature
console.ts:40 [2024-10-14T17:11:01.808Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-14T17:11:01.811Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-14T17:11:01.813Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-14T17:11:01.815Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-14T17:11:01.817Z] +SUBSCRIBE: ems-esp.0.system.sensors.temperatures.outdoor_t1
console.ts:40 [2024-10-14T17:11:01.820Z] +SUBSCRIBE: midea.0.20890720963876.status.outdoorTemperature
console.ts:40 [2024-10-14T17:11:01.822Z] +SUBSCRIBE: scene.0.Alarm.Einbrecher_Scheinwerfer
console.ts:40 [2024-10-14T17:11:01.825Z] +SUBSCRIBE: hm-rpc.1.HmIP-RCV-1.28.PRESS_SHORT
console.ts:40 [2024-10-14T17:11:01.831Z] +SUBSCRIBE: iot.0.services.custom_owntracks
console.ts:40 [2024-10-14T17:11:01.833Z] +SUBSCRIBE: hm-rpc.0.OEQ0924753.1.STATE
console.ts:40 [2024-10-14T17:11:01.836Z] +SUBSCRIBE: hm-rpc.0.OEQ0923521.1.STATE
console.ts:40 [2024-10-14T17:11:02.032Z] +SUBSCRIBE: hm-rpc.0.BidCoS-RF.8.PRESS_SHORT
console.ts:40 [2024-10-14T17:11:02.079Z] +SUBSCRIBE: tr-064.0.devices.Nico-Galaxy-S22.active
console.ts:40 Version vis-timeandweather: 1.2.1
query.yahooapis.com/v1/public/yql?q=select%20*%20from%20weather.forecast%20where%20woeid%20in%20(%27664942%27)%20and%20u%3D%27c%27&rnd=20249119&format=json&callback=jQuery111203023413300950646_1728925857508&_=1728925857509:1 
        
        
       Failed to load resource: net::ERR_NAME_NOT_RESOLVEDUnderstand this error
console.ts:40 vis-materialdesign: theme default 'colors' (light) successfully bound to css variables
console.ts:40 vis-materialdesign: theme 'colors' (light) successfully bound to css variables
console.ts:40 vis-materialdesign: theme default 'fonts' successfully bound to css variables
console.ts:40 vis-materialdesign: theme 'fonts' successfully bound to css variables
console.ts:40 vis-materialdesign: theme default 'font-sizes' successfully bound to css variables
console.ts:40 vis-materialdesign: theme 'font-sizes' successfully bound to css variables
console.ts:40 Translate: Please define states
console.ts:40 Translate: Select object ID
console.ts:40 [2024-10-14T17:11:04.423Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.SET_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.425Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.VALVE_STATE
console.ts:40 [2024-10-14T17:11:04.430Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.SET_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.431Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.VALVE_STATE
console.ts:40 [2024-10-14T17:11:04.433Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.SET_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.435Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.VALVE_STATE
console.ts:40 [2024-10-14T17:11:04.440Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.442Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.SET_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.474Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.SET_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.525Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.VALVE_STATE
console.ts:40 [2024-10-14T17:11:04.529Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.SET_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.530Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.537Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.CONTROL_MODE
console.ts:40 [2024-10-14T17:11:04.540Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.CONTROL_MODE
console.ts:40 [2024-10-14T17:11:04.543Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.CONTROL_MODE
console.ts:40 [2024-10-14T17:11:04.545Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.CONTROL_MODE
console.ts:40 [2024-10-14T17:11:04.551Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.VALVE_STATE
console.ts:40 [2024-10-14T17:11:04.556Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.VALVE_STATE
console.ts:40 [2024-10-14T17:11:04.559Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.SET_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.561Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.VALVE_STATE
console.ts:40 [2024-10-14T17:11:04.563Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.565Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.VALVE_STATE
console.ts:40 [2024-10-14T17:11:04.568Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.SET_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.570Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-14T17:11:04.573Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.CONTROL_MODE
console.ts:40 [2024-10-14T17:11:04.575Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.CONTROL_MODE
console.ts:40 [2024-10-14T17:11:04.576Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.CONTROL_MODE
console.ts:40 [2024-10-14T17:11:04.578Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.CONTROL_MODE
console.ts:40 [2024-10-14T17:11:04.579Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.manualRoomSetpoint
console.ts:40 [2024-10-14T17:11:04.580Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.pumpModulation
console.ts:40 [2024-10-14T17:11:04.584Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.operationMode
console.ts:40 [2024-10-14T17:11:04.650Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Bett.POWER
console.ts:40 [2024-10-14T17:11:04.652Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Flur.POWER
console.ts:40 [2024-10-14T17:11:04.653Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Esszimmer.POWER
console.ts:40 [2024-10-14T17:11:04.821Z] +SUBSCRIBE: sonoff.0.Tosmota_Heizlüfter_unten.POWER
console.ts:40 [2024-10-14T17:11:04.823Z] +SUBSCRIBE: shelly.0.shellyplus1pm#fcb467a687c0#1.Relay0.Switch
:8082/vis-2/?Nico#Heizung:1 Uncaught (in promise) Understand this error

Mod-Edit: Code/Log in Code Tags gepackt. Bitte benutzt die Code Tags Funktion -> </>
Hier gehts zur Hilfe.

OliverIO

@sandy sagte in Vis2 ab morgen im stable:

:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js:1 Failed to load resource: the server responded with a status of 404 (Not Found)Understand this error

ok, datei ist wohl nicht da.
dann bitte auf der konsole

iobroker upload all

damit werden alle dateien neu beim web server registriert.

Sandy

@oliverio said in Vis2 ab morgen im stable:

iobroker upload all

Guten Morgen.

Habe "iobroker upload all" gemacht aber es besteht immer noch der selbe Fehler :-(

 iobroker.vis-2@2.9.64 using theme "dark"
 
██╗ ██████╗ ██████╗ ██████╗  ██████╗ ██╗  ██╗███████╗██████╗ 
██║██╔═══██╗██╔══██╗██╔══██╗██╔═══██╗██║ ██╔╝██╔════╝██╔══██╗
██║██║   ██║██████╔╝██████╔╝██║   ██║█████╔╝ █████╗  ██████╔╝
██║██║   ██║██╔══██╗██╔══██╗██║   ██║██╔═██╗ ██╔══╝  ██╔══██╗
██║╚██████╔╝██████╔╝██║  ██║╚██████╔╝██║  ██╗███████╗██║  ██║
╚═╝ ╚═════╝ ╚═════╝ ╚═╝  ╚═╝ ╚═════╝ ╚═╝  ╚═╝╚══════╝╚═╝  ╚═╝

 Nice to see you here! :) Join our dev community here https://github.com/ioBroker/ioBroker or here https://github.com/iobroker-community-adapters
 Help us to create open source project with reactJS!
 See you :)
 Sentry initialized
 Skip script "canvas-gauges" widgets/canvas-gauges/js/gauge.min.js
5 Skip script "canvas-gauges" inline
10 Skip script "colorpicker" inline
 Skip script "fancyswitch" widgets/fancyswitch/js/jquery-ui.toggleSwitch.js
 Skip script "fancyswitch" widgets/fancyswitch/js/jquery.ibutton.min.js
8 Skip script "fancyswitch" inline
 Skip script "google-fonts" inline
 Skip script "info" ../adapter/info/lib/js/commons.js
 Skip script "info" ../adapter/info/lib/js/popupnews.js
 Skip script "info" widgets/info/js/info.js
2 Skip script "info" inline
 Skip script "jqplot" widgets/jqplot/js/jquery.jqplot.min.js
2 Skip script "jqplot" inline
 Version vis-jqui-mfd: 1.0.12
 Skip script "justgage" widgets/justgage/js/justgage.js
4 Skip script "justgage" inline
3 Skip script "map" inline
 Metro version: "1.2.0"
 Version vis-plumb: 1.0.0
3 Skip script "swipe" inline
 Skip script "weather" widgets/weather/lib/js/lib/jquery.event.drag.js
 Skip script "weather" widgets/weather/lib/js/lib/jquery.mousewheel.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.canvaswrapper.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.colorhelpers.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.saturated.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.browser.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.drawSeries.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.uiConstants.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.time.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.legend.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.navigate.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.touchNavigate.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.hover.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.touch.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.selection.js
 Skip script "weather" widgets/weather/lib/js/flot/jquery.flot.axislabels.js
2 Skip script "weather" inline
 Version material: 0.1.5
 Version trashschedule: 3.3.0
 Download the Vue Devtools extension for a better development experience:
https://github.com/vuejs/vue-devtools
 You are running Vue in development mode.
Make sure to turn on production mode when deploying for production.
See more tips at https://vuejs.org/guide/deployment.html
 Version vis-materialdesign: 0.5.76
 vis-materialdesign: vibration supported by device: 'true'
 vis-materialdesign: sentry datapoint 'vis-materialdesign.0.sentry' not exist! Go to the adapter settings to activate it.
(anonymous) @ main.8e80ccb0.js:2Understand this warning
 vis-materialdesign: click audio file '/vis.0/materialdesign-widgets-click-sound.mp3' not exists!
(anonymous) @ main.8e80ccb0.js:2Understand this warning
:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js:1  Failed to load resource: the server responded with a status of 404 (Not Found)Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ChunkLoadError: Loading chunk node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0 failed.
(error: http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js)
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {"message":"Loading chunk node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0 failed.\n(error: http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js)","name":"ChunkLoadError","type":"error","request":"http://192.168.178.43:8082/vis-2/widgets/vis-2-widgets-jaeger-design/static/js/node_modules_iobroker_vis-2-widgets-react-dev_index_js-_081e0.187a47ed.chunk.js"}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: ReferenceError: Cannot access 'x' before initialization
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Cannot load widget system.adapter.vis-2-widgets-jaeger-design.0: {}
(anonymous) @ main.8e80ccb0.js:2Understand this error
 Translate: Write state
 Translate: jqui_Close
 Translate: jqui_input
 Translate: jqui_off
 Translate: jqui_on
 Translate: Value
 Ignored canvas-gauges/tplCGlinearGauge because not used in project
 Ignored canvas-gauges/tplCGradialGauge because not used in project
 Ignored canvas-gauges/tplCGCompas because not used in project
 Ignored canvas-gauges/tplCGflatGauge because not used in project
 Ignored colorpicker/tplRGBSpectrum because not used in project
 Ignored colorpicker/tplSpectrumHomematic because not used in project
 Ignored colorpicker/tplRGBFarbtastic because not used in project
 Ignored colorpicker/tplHUEjscolor because not used in project
 Ignored colorpicker/tplHUEPickerXY because not used in project
 Ignored colorpicker/tplHUEIndicatorXY because not used in project
 Ignored colorpicker/tplHUEPickerCT because not used in project
 Ignored colorpicker/tplHUEIndicatorCT because not used in project
 Ignored colorpicker/tplJscolor because not used in project
 Ignored fancyswitch/tplFancySwitch1 because not used in project
 Ignored fancyswitch/tplFancySwitch2 because not used in project
 Ignored fancyswitch/tplFancyDarkAnAus because not used in project
 Ignored fancyswitch/tplFancyDarkAnAusRev because not used in project
 Ignored fancyswitch/tplFancyDarkAnAusWippe because not used in project
 Ignored fancyswitch/tplFancyGivaIButton because not used in project
 Ignored fancyswitch/tplFancyToggleswitch because not used in project
 Ignored info/tplInfoMessages because not used in project
 Ignored info/tplInfoCalendar because not used in project
 Ignored jqplot/tplJqplotGauge because not used in project
 Ignored justgage/tplJustgageJustGage because not used in project
 Ignored justgage/tplJustgageValueColored because not used in project
 Ignored justgage/tplJustgageIndicatorColored because not used in project
 Ignored justgage/tplJustgageValueIndicatorColored because not used in project
 Ignored map/tplOsm because not used in project
 Ignored map/tplGoogleMap because not used in project
 Ignored swipe/tplSwipe because not used in project
 Ignored swipe/tplCarousel because not used in project
 Ignored weather/tplWeatherShowInstance because not used in project
 [2024-10-15T06:16:18.555Z] +SUBSCRIBE: ical.0.data.html
 [2024-10-15T06:16:18.562Z] +SUBSCRIBE: hm-rpc.0.OEQ0923598.1.STATE
 [2024-10-15T06:16:18.565Z] +SUBSCRIBE: hm-rpc.0.OEQ0923572.1.STATE
 [2024-10-15T06:16:18.567Z] +SUBSCRIBE: hm-rpc.0.NEQ1158750.1.STATE
console.ts:40 [2024-10-15T06:16:18.567Z] +SUBSCRIBE: hm-rpc.0.NEQ1158750.1.LOWBAT
console.ts:40 Version vis-hqwidgets: 1.5.1
console.ts:40 [2024-10-15T06:16:18.569Z] +SUBSCRIBE: hm-rpc.0.OEQ1980740.1.STATE
console.ts:40 [2024-10-15T06:16:18.571Z] +SUBSCRIBE: hm-rpc.0.OEQ2138145.1.STATE
console.ts:40 [2024-10-15T06:16:18.571Z] +SUBSCRIBE: hm-rpc.0.OEQ2138145.1.LOWBAT
console.ts:40 [2024-10-15T06:16:18.586Z] +SUBSCRIBE: hm-rpc.0.OEQ0923620.1.STATE
console.ts:40 [2024-10-15T06:16:18.588Z] +SUBSCRIBE: hm-rpc.0.OEQ0923542.1.STATE
console.ts:40 [2024-10-15T06:16:18.590Z] +SUBSCRIBE: hm-rpc.0.OEQ0924873.1.STATE
console.ts:40 [2024-10-15T06:16:18.591Z] +SUBSCRIBE: hm-rpc.0.OEQ0923538.1.STATE
console.ts:40 [2024-10-15T06:16:18.592Z] +SUBSCRIBE: tr-064.0.devices.nicogalaxys23plus.active
console.ts:40 [2024-10-15T06:16:18.595Z] +SUBSCRIBE: hm-rega.0.22483
console.ts:40 [2024-10-15T06:16:18.596Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.roomtemperature
console.ts:40 [2024-10-15T06:16:18.597Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-15T06:16:18.598Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-15T06:16:18.599Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-15T06:16:18.600Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-15T06:16:18.601Z] +SUBSCRIBE: ems-esp.0.system.sensors.temperatures.outdoor_t1
console.ts:40 [2024-10-15T06:16:18.603Z] +SUBSCRIBE: midea.0.20890720963876.status.outdoorTemperature
console.ts:40 [2024-10-15T06:16:18.605Z] +SUBSCRIBE: scene.0.Alarm.Einbrecher_Scheinwerfer
console.ts:40 [2024-10-15T06:16:18.606Z] +SUBSCRIBE: hm-rpc.1.HmIP-RCV-1.28.PRESS_SHORT
console.ts:40 [2024-10-15T06:16:18.609Z] +SUBSCRIBE: iot.0.services.custom_owntracks
console.ts:40 [2024-10-15T06:16:18.610Z] +SUBSCRIBE: hm-rpc.0.OEQ0924753.1.STATE
console.ts:40 [2024-10-15T06:16:18.612Z] +SUBSCRIBE: hm-rpc.0.OEQ0923521.1.STATE
console.ts:40 [2024-10-15T06:16:18.637Z] +SUBSCRIBE: hm-rpc.0.BidCoS-RF.8.PRESS_SHORT
console.ts:40 [2024-10-15T06:16:18.675Z] +SUBSCRIBE: tr-064.0.devices.Nico-Galaxy-S22.active
console.ts:40 Version vis-timeandweather: 1.2.1
query.yahooapis.com/v1/public/yql?q=select%20*%20from%20weather.forecast%20where%20woeid%20in%20(%27664942%27)%20and%20u%3D%27c%27&rnd=2024928&format=json&callback=jQuery111201235079405990629_1728972974104&_=1728972974105:1 
        
        
       Failed to load resource: net::ERR_NAME_NOT_RESOLVEDUnderstand this error
console.ts:40 vis-materialdesign: theme default 'colors' (light) successfully bound to css variables
console.ts:40 vis-materialdesign: theme 'colors' (light) successfully bound to css variables
console.ts:40 vis-materialdesign: theme default 'fonts' successfully bound to css variables
console.ts:40 vis-materialdesign: theme 'fonts' successfully bound to css variables
console.ts:40 vis-materialdesign: theme default 'font-sizes' successfully bound to css variables
console.ts:40 vis-materialdesign: theme 'font-sizes' successfully bound to css variables
console.ts:40 Translate: Please define states
console.ts:40 Translate: Select object ID
console.ts:40 [2024-10-15T06:16:24.043Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.SET_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.044Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.VALVE_STATE
console.ts:40 [2024-10-15T06:16:24.050Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.SET_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.052Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.VALVE_STATE
console.ts:40 [2024-10-15T06:16:24.055Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.SET_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.057Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.VALVE_STATE
console.ts:40 [2024-10-15T06:16:24.060Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.062Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.SET_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.090Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.SET_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.148Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.VALVE_STATE
console.ts:40 [2024-10-15T06:16:24.150Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.SET_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.152Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.155Z] +SUBSCRIBE: hm-rpc.0.OEQ0655923.4.CONTROL_MODE
console.ts:40 [2024-10-15T06:16:24.158Z] +SUBSCRIBE: hm-rpc.0.OEQ0662018.4.CONTROL_MODE
console.ts:40 [2024-10-15T06:16:24.159Z] +SUBSCRIBE: hm-rpc.0.OEQ0656186.4.CONTROL_MODE
console.ts:40 [2024-10-15T06:16:24.161Z] +SUBSCRIBE: hm-rpc.0.OEQ0662021.4.CONTROL_MODE
console.ts:40 [2024-10-15T06:16:24.167Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.VALVE_STATE
console.ts:40 [2024-10-15T06:16:24.173Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.VALVE_STATE
console.ts:40 [2024-10-15T06:16:24.176Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.SET_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.178Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.VALVE_STATE
console.ts:40 [2024-10-15T06:16:24.180Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.185Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.VALVE_STATE
console.ts:40 [2024-10-15T06:16:24.188Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.SET_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.190Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.ACTUAL_TEMPERATURE
console.ts:40 [2024-10-15T06:16:24.192Z] +SUBSCRIBE: hm-rpc.0.OEQ0656324.4.CONTROL_MODE
console.ts:40 [2024-10-15T06:16:24.194Z] +SUBSCRIBE: hm-rpc.0.OEQ1251536.4.CONTROL_MODE
console.ts:40 [2024-10-15T06:16:24.196Z] +SUBSCRIBE: hm-rpc.0.OEQ1251550.4.CONTROL_MODE
console.ts:40 [2024-10-15T06:16:24.199Z] +SUBSCRIBE: hm-rpc.0.OEQ1251558.4.CONTROL_MODE
console.ts:40 [2024-10-15T06:16:24.202Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.manualRoomSetpoint
console.ts:40 [2024-10-15T06:16:24.203Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.pumpModulation
console.ts:40 [2024-10-15T06:16:24.206Z] +SUBSCRIBE: ems-esp.0.heatingCircuits.hc1.operationMode
console.ts:40 [2024-10-15T06:16:24.261Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Bett.POWER
console.ts:40 [2024-10-15T06:16:24.262Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Flur.POWER
console.ts:40 [2024-10-15T06:16:24.264Z] +SUBSCRIBE: sonoff.0.Gosund_Heizung_Esszimmer.POWER
console.ts:40 [2024-10-15T06:16:24.308Z] +SUBSCRIBE: sonoff.0.Tosmota_Heizlüfter_unten.POWER
console.ts:40 [2024-10-15T06:16:24.309Z] +SUBSCRIBE: shelly.0.shellyplus1pm#fcb467a687c0#1.Relay0.Switch
:8082/vis-2/?Nico#Heizung:1 Uncaught (in promise) Error: A listener indicated an asynchronous response by returning true, but the message channel closed before a response was receivedUnderstand this error

OliverIO

@sandy dann diesen Adapter neu inst

Sandy

@oliverio habe jetzt den Adapter gelöscht und neu installiert aber das Problem ist immer noch das selbe :-(

Weiß schon gar nicht mehr was ich noch machen soll :-(

LG Sandy

sigi234

@sandy
Browser Cache mal komplett geleert und System neu gestartet?

Sandy

@sigi234

habe ich gerade gemacht, leider ohne Erfolg.

Das ich die Lizenz nicht gekauft habe hat damit ja nichts zu tun oder ? Sie lief ja auch ohne das ich sie gekauft habe seit Monaten.

OliverIO

@sandy

für privat ist die vis-2 lizenz kostenlos
du musst dich nur auf der iobroker seite einloggen oder registrieren und dann bekommst du die lizenz über den lizenz reiter
https://iobroker.net

das jaeger-design kostet allerdings was. ob nur für kommerziell oder auch für privat weiß ich allerdings nicht. ist aber closed source, daher kann da wirklich nur der author helfen.

SilentM1978

@sandy "iobroker upload all" hat bei mir zum Erfolg geführt. Der Adapter funktioniert jetzt wieder.

Negalein

Hallo

Wollte gerade am Zweitsystem (Test) die Lizenz für Vis-2 aktivieren.

Aber auf iobroker.net kann ich keine neue Lizenz kaufen.

Unter "Lizenzen" seh ich nur die vom Hauptsystem.

Ist für ein Zweitsystem ein eigener User auf iobroker.net nötig?

Community Forum

NEWS

Vis2 ab 09.01.2024 im stable

Support us

479

32.4k

81.5k

1.3m