nach nodeJs update auf 20.16.0 keine Skrpt seite mehr
-
iob fix iob list adapters@thomas-braun
auf ein neues...pi@raspberrypi:/opt/iobroker $ iob fix library: loaded Library version=2024-05-24 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-01-04 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== Holen:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease [15,0 kB] OK:2 http://archive.raspberrypi.org/debian bullseye InRelease OK:3 https://deb.nodesource.com/node_20.x nodistro InRelease Es wurden 15,0 kB in 2 s geholt (6.669 B/s). Paketlisten werden gelesen… Fertig ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== pi@raspberrypi:/opt/iobroker $ iob list adapters system.adapter.admin : admin - v7.0.22 system.adapter.backitup : backitup - v2.11.0 system.adapter.discovery : discovery - v4.5.0 system.adapter.ds18b20 : ds18b20 - v2.0.5 system.adapter.enet : enet - v1.0.1 system.adapter.info : info - v1.9.26 system.adapter.javascript : javascript - v8.7.6 system.adapter.linkeddevices : linkeddevices - v1.5.5 system.adapter.modbus : modbus - v6.1.0 system.adapter.node-red : node-red - v5.2.1 system.adapter.palazzetti : palazzetti - v0.0.6 system.adapter.proxy : proxy - v1.3.2 system.adapter.rpi2 : rpi2 - v1.3.2 system.adapter.shelly : shelly - v7.0.0 system.adapter.simple-api : simple-api - v2.8.0 system.adapter.slideshow : slideshow - v0.1.4 system.adapter.smartmeter : smartmeter - v3.4.0 system.adapter.socketio : socketio - v6.7.0 system.adapter.sonoff : sonoff - v3.0.3 system.adapter.terminal : terminal - v0.2.2 system.adapter.tr-064 : tr-064 - v4.2.18 system.adapter.vis : vis - v1.5.6 system.adapter.vw-connect : vw-connect - v0.0.67 system.adapter.web : web - v6.2.5 system.adapter.withings : withings - v0.0.13 system.adapter.ws : ws - v2.6.1 system.adapter.yahka : yahka - v1.0.3 pi@raspberrypi:/opt/iobroker $Mein Adapter: JUNG/GIRA eNet-Adapter
-
@thomas-braun
auf ein neues...pi@raspberrypi:/opt/iobroker $ iob fix library: loaded Library version=2024-05-24 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-01-04 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== Holen:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease [15,0 kB] OK:2 http://archive.raspberrypi.org/debian bullseye InRelease OK:3 https://deb.nodesource.com/node_20.x nodistro InRelease Es wurden 15,0 kB in 2 s geholt (6.669 B/s). Paketlisten werden gelesen… Fertig ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== pi@raspberrypi:/opt/iobroker $ iob list adapters system.adapter.admin : admin - v7.0.22 system.adapter.backitup : backitup - v2.11.0 system.adapter.discovery : discovery - v4.5.0 system.adapter.ds18b20 : ds18b20 - v2.0.5 system.adapter.enet : enet - v1.0.1 system.adapter.info : info - v1.9.26 system.adapter.javascript : javascript - v8.7.6 system.adapter.linkeddevices : linkeddevices - v1.5.5 system.adapter.modbus : modbus - v6.1.0 system.adapter.node-red : node-red - v5.2.1 system.adapter.palazzetti : palazzetti - v0.0.6 system.adapter.proxy : proxy - v1.3.2 system.adapter.rpi2 : rpi2 - v1.3.2 system.adapter.shelly : shelly - v7.0.0 system.adapter.simple-api : simple-api - v2.8.0 system.adapter.slideshow : slideshow - v0.1.4 system.adapter.smartmeter : smartmeter - v3.4.0 system.adapter.socketio : socketio - v6.7.0 system.adapter.sonoff : sonoff - v3.0.3 system.adapter.terminal : terminal - v0.2.2 system.adapter.tr-064 : tr-064 - v4.2.18 system.adapter.vis : vis - v1.5.6 system.adapter.vw-connect : vw-connect - v0.0.67 system.adapter.web : web - v6.2.5 system.adapter.withings : withings - v0.0.13 system.adapter.ws : ws - v2.6.1 system.adapter.yahka : yahka - v1.0.3 pi@raspberrypi:/opt/iobroker $@stoffel67
Also ist sowohl ble wie auch radar2 nun weg.iob update iog upgrade all -y iob stop iob upgrade self iob start -
@stoffel67
Also ist sowohl ble wie auch radar2 nun weg.iob update iog upgrade all -y iob stop iob upgrade self iob start@thomas-braun
scheinbar nicht, obwohl ich die Adapter gelöscht habe
in "iob list adpaters" sind sie weg
bei "iob update" tauchen sie wieder aufpi@raspberrypi:/opt/iobroker $ iob update Used repository: stable Adapter "admin" : 7.0.22 , installed 7.0.22 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "ble" : 0.14.0 , installed 0.14.0 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.5 Adapter "enet" : 1.0.1 , installed 1.0.1 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 5.0.12 [Updatable] Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "modbus" : 6.2.3 , installed 6.1.0 [Updatable] Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "proxy" : 1.3.2 , installed 1.3.2 Adapter "radar2" : 2.2.0 , installed 2.1.0 [Updatable] Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.1.0 , installed 3.0.3 [Updatable] Adapter "tr-064" : 4.3.0 , installed 4.2.18 [Updatable] Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "withings" : 0.0.13 , installed 0.0.13 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "yahka" : 1.0.3 , installed 1.0.3 pi@raspberrypi:/opt/iobroker $und nochmal von vorne...
pi@raspberrypi:/opt/iobroker $ iob update Used repository: stable Adapter "admin" : 7.0.22 , installed 7.0.22 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.5 Adapter "enet" : 1.0.1 , installed 1.0.1 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 5.0.12 [Updatable] Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "modbus" : 6.2.3 , installed 6.1.0 [Updatable] Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "proxy" : 1.3.2 , installed 1.3.2 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.1.0 , installed 3.0.3 [Updatable] Adapter "tr-064" : 4.3.0 , installed 4.2.18 [Updatable] Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "withings" : 0.0.13 , installed 0.0.13 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "yahka" : 1.0.3 , installed 1.0.3 pi@raspberrypi:/opt/iobroker $ iob upgrade all -y Cannot check dependencies: Invalid version of "js-controller". Installed "5.0.12", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "5.0.12", required ">=5.0.19 Update modbus from @6.1.0 to @6.2.3 NPM version: 10.8.1 Installing iobroker.modbus@6.2.3... (System call) changed 1 package in 35s 153 packages are looking for funding run `npm fund` for details Update "system.adapter.modbus.0" upload [9] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/asset-manifest.json asset-manifest.json application/json upload [8] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/favicon.ico favicon.ico image/vnd.microsoft.icon upload [7] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/index_m.html index_m.html text/html upload [6] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/manifest.json manifest.json application/json upload [5] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/modbus.png modbus.png image/png upload [4] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/css/main.96b3c861.css static/css/main.96b3c861.css text/css upload [3] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/css/main.96b3c861.css.map static/css/main.96b3c861.css.map application/json upload [2] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/js/main.18496c94.js static/js/main.18496c94.js application/javascript upload [1] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/js/main.18496c94.js.LICENSE.txt static/js/main.18496c94.js.LICENSE.txt text/plain upload [0] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/js/main.18496c94.js.map static/js/main.18496c94.js.map application/json pi@raspberrypi:/opt/iobroker $ iob stop pi@raspberrypi:/opt/iobroker $ iob upgrade self Update js-controller from @5.0.12 to @6.0.9 Stopped Objects DB Stopped States DB NPM version: 10.8.1 Installing iobroker.js-controller@6.0.9... (System call) added 7 packages, removed 45 packages, and changed 26 packages in 2m 153 packages are looking for funding run `npm fund` for details pi@raspberrypi:/opt/iobroker $ iob start pi@raspberrypi:/opt/iobroker $ich denke... Systemseitig ist fast alles wieder Ok... im Log kommt nach iob start noch folgendes:
javascript.0 2024-08-03 17:16:09.567 error at Script.runInContext (node:vm:148:12) javascript.0 2024-08-03 17:16:09.565 error at script.js.common.sh1106:707:3 javascript.0 2024-08-03 17:16:09.563 error at script.js.common.sh1106:5:18 javascript.0 2024-08-03 17:16:09.561 error script.js.common.sh1106: TypeError: Cannot read properties of undefined (reading 'openSync') javascript.0 2024-08-03 17:16:09.544 error at Script.runInContext (node:vm:148:12) javascript.0 2024-08-03 17:16:09.543 error at script.js.common.sh1106:707:3 javascript.0 2024-08-03 17:16:09.541 error at script.js.common.sh1106:4:11 javascript.0 2024-08-03 17:16:09.538 error at require (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:552:28) javascript.0 2024-08-03 17:16:09.536 error at require (node:internal/modules/helpers:179:18) javascript.0 2024-08-03 17:16:09.534 error at Module.require (node:internal/modules/cjs/loader:1233:19) javascript.0 2024-08-03 17:16:09.531 error script.js.common.sh1106: Error: Cannot find module '@iobroker-javascript.0/i2c-bus' javascript.0 2024-08-03 17:15:27.591 error Error: The module '/opt/iobroker/node_modules/i2c-bus/build/Release/i2c.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 108. This version of Node.js requiresNODE_MODULE_VERSION 115. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`). at Object.Module._extensions..node (node:internal/modules/cjs/loader:1454:18) at Module.load (node:internal/modules/cjs/loader:1208:32) at Function.Module._load (node:internal/modules/cjs/loader:1024:12) at Module.require (node:internal/modules/cjs/loader:1233:19) at require (node:internal/modules/helpers:179:18) at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48) at Object.<anonymous> (/opt/iobroker/node_modules/i2c-bus/i2c-bus.js:4:32) at Module._compile (node:internal/modules/cjs/loader:1358:14) at Object.Module._extensions..js (node:internal/modules/cjs/loader:1416:10) at Module.load (node:internal/modules/cjs/loader:1208:32) javascript.0 2024-08-03 17:15:27.589 error Error: The module '/opt/iobroker/node_modules/i2c-bus/build/Release/i2c.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 108. This version of Node.js requiresNODE_MODULE_VERSION 115. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`). javascript.0 2024-08-03 17:15:27.583 error An error happened which is most likely from one of your scripts, but the originating script could not be detected. rpi2.0 2024-08-03 17:12:24.679 error Cannot initialize/setMode GPIO: Error: Could not locate the bindings file. Tried: → /opt/iobroker/node_modules/epoll/build/epoll.node /opt/iobroker/node_modules/epoll/build/Debug/epoll.node /opt/iobroker/node_modules/epoll/build/Release/epoll.node /opt/iobroker/node_modules/epoll/out/Debug/epoll.node /opt/iobroker/node_modules/epoll/Debug/epoll.node /opt/iobroker/node_modules/epoll/out/Release/epoll.node /opt/iobroker/node_modules/epoll/Release/epoll.node /opt/iobroker/node_modules/epoll/build/default/epoll.node /opt/iobroker/node_modules/epoll/compiled/20.16.0/linux/arm/epoll.node /opt/iobroker/node_modules/epoll/addon-build/release/install-root/epoll.node /opt/iobroker/node_modules/epoll/addon-build/debug/install-root/epoll.node /opt/iobroker/node_modules/epoll/addon-build/default/install-root/epoll.node /opt/iobroker/node_modules/epoll/lib/binding/node-v115-linux-arm/epoll.nodeMein Adapter: JUNG/GIRA eNet-Adapter
-
@thomas-braun
scheinbar nicht, obwohl ich die Adapter gelöscht habe
in "iob list adpaters" sind sie weg
bei "iob update" tauchen sie wieder aufpi@raspberrypi:/opt/iobroker $ iob update Used repository: stable Adapter "admin" : 7.0.22 , installed 7.0.22 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "ble" : 0.14.0 , installed 0.14.0 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.5 Adapter "enet" : 1.0.1 , installed 1.0.1 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 5.0.12 [Updatable] Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "modbus" : 6.2.3 , installed 6.1.0 [Updatable] Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "proxy" : 1.3.2 , installed 1.3.2 Adapter "radar2" : 2.2.0 , installed 2.1.0 [Updatable] Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.1.0 , installed 3.0.3 [Updatable] Adapter "tr-064" : 4.3.0 , installed 4.2.18 [Updatable] Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "withings" : 0.0.13 , installed 0.0.13 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "yahka" : 1.0.3 , installed 1.0.3 pi@raspberrypi:/opt/iobroker $und nochmal von vorne...
pi@raspberrypi:/opt/iobroker $ iob update Used repository: stable Adapter "admin" : 7.0.22 , installed 7.0.22 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.5 Adapter "enet" : 1.0.1 , installed 1.0.1 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 5.0.12 [Updatable] Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "modbus" : 6.2.3 , installed 6.1.0 [Updatable] Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "proxy" : 1.3.2 , installed 1.3.2 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.1.0 , installed 3.0.3 [Updatable] Adapter "tr-064" : 4.3.0 , installed 4.2.18 [Updatable] Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "withings" : 0.0.13 , installed 0.0.13 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "yahka" : 1.0.3 , installed 1.0.3 pi@raspberrypi:/opt/iobroker $ iob upgrade all -y Cannot check dependencies: Invalid version of "js-controller". Installed "5.0.12", required ">=5.0.19 Cannot check dependencies: Invalid version of "js-controller". Installed "5.0.12", required ">=5.0.19 Update modbus from @6.1.0 to @6.2.3 NPM version: 10.8.1 Installing iobroker.modbus@6.2.3... (System call) changed 1 package in 35s 153 packages are looking for funding run `npm fund` for details Update "system.adapter.modbus.0" upload [9] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/asset-manifest.json asset-manifest.json application/json upload [8] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/favicon.ico favicon.ico image/vnd.microsoft.icon upload [7] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/index_m.html index_m.html text/html upload [6] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/manifest.json manifest.json application/json upload [5] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/modbus.png modbus.png image/png upload [4] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/css/main.96b3c861.css static/css/main.96b3c861.css text/css upload [3] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/css/main.96b3c861.css.map static/css/main.96b3c861.css.map application/json upload [2] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/js/main.18496c94.js static/js/main.18496c94.js application/javascript upload [1] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/js/main.18496c94.js.LICENSE.txt static/js/main.18496c94.js.LICENSE.txt text/plain upload [0] modbus.admin /opt/iobroker/node_modules/iobroker.modbus/admin/static/js/main.18496c94.js.map static/js/main.18496c94.js.map application/json pi@raspberrypi:/opt/iobroker $ iob stop pi@raspberrypi:/opt/iobroker $ iob upgrade self Update js-controller from @5.0.12 to @6.0.9 Stopped Objects DB Stopped States DB NPM version: 10.8.1 Installing iobroker.js-controller@6.0.9... (System call) added 7 packages, removed 45 packages, and changed 26 packages in 2m 153 packages are looking for funding run `npm fund` for details pi@raspberrypi:/opt/iobroker $ iob start pi@raspberrypi:/opt/iobroker $ich denke... Systemseitig ist fast alles wieder Ok... im Log kommt nach iob start noch folgendes:
javascript.0 2024-08-03 17:16:09.567 error at Script.runInContext (node:vm:148:12) javascript.0 2024-08-03 17:16:09.565 error at script.js.common.sh1106:707:3 javascript.0 2024-08-03 17:16:09.563 error at script.js.common.sh1106:5:18 javascript.0 2024-08-03 17:16:09.561 error script.js.common.sh1106: TypeError: Cannot read properties of undefined (reading 'openSync') javascript.0 2024-08-03 17:16:09.544 error at Script.runInContext (node:vm:148:12) javascript.0 2024-08-03 17:16:09.543 error at script.js.common.sh1106:707:3 javascript.0 2024-08-03 17:16:09.541 error at script.js.common.sh1106:4:11 javascript.0 2024-08-03 17:16:09.538 error at require (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:552:28) javascript.0 2024-08-03 17:16:09.536 error at require (node:internal/modules/helpers:179:18) javascript.0 2024-08-03 17:16:09.534 error at Module.require (node:internal/modules/cjs/loader:1233:19) javascript.0 2024-08-03 17:16:09.531 error script.js.common.sh1106: Error: Cannot find module '@iobroker-javascript.0/i2c-bus' javascript.0 2024-08-03 17:15:27.591 error Error: The module '/opt/iobroker/node_modules/i2c-bus/build/Release/i2c.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 108. This version of Node.js requiresNODE_MODULE_VERSION 115. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`). at Object.Module._extensions..node (node:internal/modules/cjs/loader:1454:18) at Module.load (node:internal/modules/cjs/loader:1208:32) at Function.Module._load (node:internal/modules/cjs/loader:1024:12) at Module.require (node:internal/modules/cjs/loader:1233:19) at require (node:internal/modules/helpers:179:18) at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48) at Object.<anonymous> (/opt/iobroker/node_modules/i2c-bus/i2c-bus.js:4:32) at Module._compile (node:internal/modules/cjs/loader:1358:14) at Object.Module._extensions..js (node:internal/modules/cjs/loader:1416:10) at Module.load (node:internal/modules/cjs/loader:1208:32) javascript.0 2024-08-03 17:15:27.589 error Error: The module '/opt/iobroker/node_modules/i2c-bus/build/Release/i2c.node'was compiled against a different Node.js version usingNODE_MODULE_VERSION 108. This version of Node.js requiresNODE_MODULE_VERSION 115. Please try re-compiling or re-installingthe module (for instance, using `npm rebuild` or `npm install`). javascript.0 2024-08-03 17:15:27.583 error An error happened which is most likely from one of your scripts, but the originating script could not be detected. rpi2.0 2024-08-03 17:12:24.679 error Cannot initialize/setMode GPIO: Error: Could not locate the bindings file. Tried: → /opt/iobroker/node_modules/epoll/build/epoll.node /opt/iobroker/node_modules/epoll/build/Debug/epoll.node /opt/iobroker/node_modules/epoll/build/Release/epoll.node /opt/iobroker/node_modules/epoll/out/Debug/epoll.node /opt/iobroker/node_modules/epoll/Debug/epoll.node /opt/iobroker/node_modules/epoll/out/Release/epoll.node /opt/iobroker/node_modules/epoll/Release/epoll.node /opt/iobroker/node_modules/epoll/build/default/epoll.node /opt/iobroker/node_modules/epoll/compiled/20.16.0/linux/arm/epoll.node /opt/iobroker/node_modules/epoll/addon-build/release/install-root/epoll.node /opt/iobroker/node_modules/epoll/addon-build/debug/install-root/epoll.node /opt/iobroker/node_modules/epoll/addon-build/default/install-root/epoll.node /opt/iobroker/node_modules/epoll/lib/binding/node-v115-linux-arm/epoll.node@stoffel67 sagte in nach nodeJs update auf 20.16.0 keine Skrpt seite mehr:
ich denke... Systemseitig ist fast alles wieder Ok... im Log kommt nach iob start noch folgendes:
Das dürfte von einem zusätzlich im javascript-Adapter eingetragenen Modul kommen.
-
@stoffel67 sagte in nach nodeJs update auf 20.16.0 keine Skrpt seite mehr:
ich denke... Systemseitig ist fast alles wieder Ok... im Log kommt nach iob start noch folgendes:
Das dürfte von einem zusätzlich im javascript-Adapter eingetragenen Modul kommen.
@thomas-braun
ich glaube ich habs jetzt wieder "im Griff"...
hab ein npm rebuild für i2c-bus gemacht... jetzt scheint dieser Fehler weg zu sein..
nur noch etwas vom RPI2 adapterrpi2.0 2024-08-03 17:53:04.517 error Cannot initialize/setMode GPIO: Error: Could not locate the bindings file. Tried: /opt/iobroker/node_modules/epoll/build/epoll.node /opt/iobroker/node_modules/epoll/build/Debug/epoll.node /opt/iobroker/node_modules/epoll/build/Release/epoll.node /opt/iobroker/node_modules/epoll/out/Debug/epoll.node /opt/iobroker/node_modules/epoll/Debug/epoll.node /opt/iobroker/node_modules/epoll/out/Release/epoll.node /opt/iobroker/node_modules/epoll/Release/epoll.node /opt/iobroker/node_modules/epoll/build/default/epoll.node /opt/iobroker/node_modules/epoll/compiled/20.16.0/linux/arm/epoll.node /opt/iobroker/node_modules/epoll/addon-build/release/install-root/epoll.node /opt/iobroker/node_modules/epoll/addon-build/debug/install-root/epoll.node /opt/iobroker/node_modules/epoll/addon-build/default/install-root/epoll.node /opt/iobroker/node_modules/epoll/lib/binding/node-v115-linux-arm/epoll.node,
Mein Adapter: JUNG/GIRA eNet-Adapter
-
@thomas-braun
ich glaube ich habs jetzt wieder "im Griff"...
hab ein npm rebuild für i2c-bus gemacht... jetzt scheint dieser Fehler weg zu sein..
nur noch etwas vom RPI2 adapterrpi2.0 2024-08-03 17:53:04.517 error Cannot initialize/setMode GPIO: Error: Could not locate the bindings file. Tried: /opt/iobroker/node_modules/epoll/build/epoll.node /opt/iobroker/node_modules/epoll/build/Debug/epoll.node /opt/iobroker/node_modules/epoll/build/Release/epoll.node /opt/iobroker/node_modules/epoll/out/Debug/epoll.node /opt/iobroker/node_modules/epoll/Debug/epoll.node /opt/iobroker/node_modules/epoll/out/Release/epoll.node /opt/iobroker/node_modules/epoll/Release/epoll.node /opt/iobroker/node_modules/epoll/build/default/epoll.node /opt/iobroker/node_modules/epoll/compiled/20.16.0/linux/arm/epoll.node /opt/iobroker/node_modules/epoll/addon-build/release/install-root/epoll.node /opt/iobroker/node_modules/epoll/addon-build/debug/install-root/epoll.node /opt/iobroker/node_modules/epoll/addon-build/default/install-root/epoll.node /opt/iobroker/node_modules/epoll/lib/binding/node-v115-linux-arm/epoll.node,
@stoffel67 sagte in nach nodeJs update auf 20.16.0 keine Skrpt seite mehr:
nur noch etwas vom RPI2 adapter
Installier den mal in der Beta-Version 2.0. Der ist relativ umfangreich umgebaut worden.
-
@stoffel67 sagte in nach nodeJs update auf 20.16.0 keine Skrpt seite mehr:
nur noch etwas vom RPI2 adapter
Installier den mal in der Beta-Version 2.0. Der ist relativ umfangreich umgebaut worden.
-
Installier den mal in der Beta-Version 2.0. Der ist relativ umfangreich umgebaut worden.
Ja - ist unbedingt notwendig.
Falls es mit rpi2 Probleme gibt bitte ium diesbezüglichen Test Topic ansprechen. -
@stoffel67 sagte in nach nodeJs update auf 20.16.0 keine Skrpt seite mehr:
nur noch etwas vom RPI2 adapter
Installier den mal in der Beta-Version 2.0. Der ist relativ umfangreich umgebaut worden.
@thomas-braun
so, habe mal die 2.0.0 installiert....läuft auch nicht ...rpi2.0 2024-08-04 11:12:46.507 error Cannot initialize/setMode GPIO: Error: Cannot find module 'opengpio' Require stack: - /opt/iobroker/node_modules/iobroker.rpi2/lib/gpioControl.js - /opt/iobroker/node_modules/iobroker.rpi2/main.jsMein Adapter: JUNG/GIRA eNet-Adapter
-
@thomas-braun
so, habe mal die 2.0.0 installiert....läuft auch nicht ...rpi2.0 2024-08-04 11:12:46.507 error Cannot initialize/setMode GPIO: Error: Cannot find module 'opengpio' Require stack: - /opt/iobroker/node_modules/iobroker.rpi2/lib/gpioControl.js - /opt/iobroker/node_modules/iobroker.rpi2/main.js@stoffel67 sagte in nach nodeJs update auf 20.16.0 keine Skrpt seite mehr:
so, habe mal die 2.0.0 installiert....läuft auch nicht ...
Wie installiert? Denn das vermisste Modul 'opengpio' wird bei der sauberen Installation mitinstalliert:
echad@chet:/opt/iobroker $ npm ls opengpio iobroker.inst@3.0.0 /opt/iobroker └─┬ iobroker.rpi2@2.0.0 └── opengpio@1.1.0 -
@thomas-braun
so, habe mal die 2.0.0 installiert....läuft auch nicht ...rpi2.0 2024-08-04 11:12:46.507 error Cannot initialize/setMode GPIO: Error: Cannot find module 'opengpio' Require stack: - /opt/iobroker/node_modules/iobroker.rpi2/lib/gpioControl.js - /opt/iobroker/node_modules/iobroker.rpi2/main.jsrpi2 test thread:
https://forum.iobroker.net/topic/75290/test-adapter-rpi2-2-xDort liest / antwortet auch der Dev
-
@stoffel67 sagte in nach nodeJs update auf 20.16.0 keine Skrpt seite mehr:
so, habe mal die 2.0.0 installiert....läuft auch nicht ...
Wie installiert? Denn das vermisste Modul 'opengpio' wird bei der sauberen Installation mitinstalliert:
echad@chet:/opt/iobroker $ npm ls opengpio iobroker.inst@3.0.0 /opt/iobroker └─┬ iobroker.rpi2@2.0.0 └── opengpio@1.1.0pi@raspberrypi:~ $ cd /opt/iobroker/ pi@raspberrypi:/opt/iobroker $ npm ls opengpio iobroker.inst@3.0.0 /opt/iobroker └─┬ iobroker.rpi2@2.0.0 └── opengpio@1.1.0 pi@raspberrypi:/opt/iobroker $
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
419
Online32.7k
Benutzer82.6k
Themen1.3m
Beiträge