NEWS
Perfomance / Delay im Javascript Adapter
ioBroker Allgemein
17
Beiträge
5
Kommentatoren
1.3k
Aufrufe
5
Watching
-
@pepp86 sagte in Perfomance / Delay im Javascript Adapter:
die Funktion startet schon verzögert auf den DP.
heisst was genau?
Tastendruck --> 3 sec --> Änderung des DP in Objekten --> 2 sec --> Trigger löst aus --> 5 sec --> Licht geht an
oder wie?
Jain. Es ist eher so:
Tastendruck/BWM Auslösung -> Sofortige Änderung des DP in Objekten -> x Sec -> Trigger löst aus -> x Sec -> Licht geht an.
Egal über welchen Service (HM, zigbee etc.). Der ursprüngliche DP wird sofort gesetzt, es hakt irgendwo zum/im JS Adapter.
-
Jain. Es ist eher so:
Tastendruck/BWM Auslösung -> Sofortige Änderung des DP in Objekten -> x Sec -> Trigger löst aus -> x Sec -> Licht geht an.
Egal über welchen Service (HM, zigbee etc.). Der ursprüngliche DP wird sofort gesetzt, es hakt irgendwo zum/im JS Adapter.
@pepp86 dann zeig mal höchstvorsorglich
iob diagin der Langfassung -
Hi,
sorry - das hatte ich gar nicht dazu geschrieben. Über Logs habe ich genau das festgestellt, die Funktion startet schon verzögert auf den DP. Also Quell-DP und Ziel-DP haben am Ende auch den timestamp verschoben. Daher wirklich die Frage, wo man ansetzen kann zum Debuggen. (JS Adapter, Controller, Redis)
@pepp86 sagte: die Funktion startet schon verzögert auf den DP.
Also besteht eine große Differenz zwischen Zeitstempel des Trigger-DP und Trigger-Zeitpunkt? Das deutet auf eine zu lange Warteschlange für Trigger-Ereignisse hin. Irgend etwas (ein Skript?) feuert wohl zu viele Ereignisse (setState) ab. Das kann an einer Schleife liegen oder an vielen parallel laufenden Timern, die nicht gestoppt wurden.
EDIT: Reagieren die Trigger unmittelbar nach Neustart der Javascript-Instanz nach einer Pause schneller?
-
@pepp86 sagte in Perfomance / Delay im Javascript Adapter:
Ne Idee wie man so einen Übeltäter am schnellsten findet?
@pepp86 sagte in Perfomance / Delay im Javascript Adapter:
@Homoran iob diag
-
@pepp86 sagte: Idee wie man so einen Übeltäter am schnellsten findet?
Wenn ein Skript die Ursache ist, sollte das folgende Testskript die 4 am häufigsten sendenden Skripte im Log alle 15 s zeigen:
const ids = $('javascript.0.scriptEnabled.*'); const scripts = []; const objects = []; ids.each(function(id) { const script = id.replace('javascript.0.scriptEnabled.', 'script.js.'); scripts.push(script); const obj = {script: script.replace('script.js.', ''), cnt: 0}; objects.push(obj); }); on({id: /.*/, from: 'system.adapter.javascript.0'}, function(dp) { const script = dp.state.c; if(script) { const idx = scripts.indexOf(script); if(idx >= 0) objects[idx].cnt++; } }); schedule('*/15 * * * * *', function() { setTimeout(function() { const sorted = []; for(let i = 0; i < objects.length; i++) { sorted[i] = objects[i]; } sorted.sort(function(a,b) { return b.cnt - a.cnt; }); sorted.length = 4; log(sorted); }, 100); });Bitte verzichtet auf Chat-Nachrichten, denn die Handhabung ist grauenhaft !
Produktiv: RPi 2 mit S.USV, HM-MOD-RPI und SLC-USB-Stick mit root fs -
Hab jetzt mal ein bisschen geguckt und beobachtet. Es gibt keine Scripte, die große Mengen an setState pro 15 Sekunden haben.
Es scheint jedoch wirklich so zu sein, dass nach einem Neustart das Phänomen verschwindet und dann langsam wieder auftaucht. Zum testen habe ich gestern einen komplett frischen Host aufgesetzt und die Instanz dorthin verschoben, keine Änderung.Nachstehend mal iob diag von dem betroffenen Host:
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: iosrv2 Icon name: computer-container Chassis: container ☐ Virtualization: lxc Operating System: Ubuntu 23.04 Kernel: Linux 5.15.85-1-pve Architecture: x86-64 Firmware Version: CB9_FV102 model name : Intel(R) Core(TM) i5-8279U CPU @ 2.40GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 17:04:55 up 1 day, 4:47, 2 users, load average: 1.57, 1.23, 1.02 CPU threads: 6 *** Time and Time Zones *** Local time: Tue 2024-07-09 17:04:55 CEST Universal time: Tue 2024-07-09 15:04:55 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': root HOME=/root GROUPS=root User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 2.1G 996M 282M 122K 868M 1.2G Swap: 4.3G 8.2K 4.3G Total: 6.4G 996M 4.6G Active iob-Instances: 43 2048 M total memory 950 M used memory 535 M active memory 1095 M inactive memory 269 M free memory 0 M buffer memory 827 M swap cache 4096 M total swap 0 M used swap 4095 M free swap *** top - Table Of Processes *** top - 17:04:55 up 1 day, 4:47, 2 users, load average: 1.57, 1.23, 1.02 Tasks: 35 total, 1 running, 34 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 2048.0 total, 267.7 free, 952.3 used, 828.0 buff/cache MiB Swap: 4096.0 total, 4096.0 free, 0.0 used. 1095.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--118--disk--0 ext4 15G 3.4G 11G 24% / none tmpfs 492K 4.0K 488K 1% /dev tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.1G 120K 3.1G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--118--disk--0 ext4 rw,relatime,stripe=16 |-/run tmpfs tmpfs rw,nosuid,nodev,size=3244760k,nr_inodes=819200,mode=755,uid=100000,gid=100000,inode64 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k,uid=100000,gid=100000,inode64 | |-/run/credentials/systemd-sysctl.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/credentials/systemd-tmpfiles-setup-dev.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 |-/dev none tmpfs rw,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev,uid=100000,gid=100000,inode64 | |-/dev/mqueue mqueue mqueue rw,relatime | |-/dev/.lxc/proc proc proc rw,relatime | |-/dev/.lxc/sys sys sysfs rw,relatime | |-/dev/full udev[/full] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/null udev[/null] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/random udev[/random] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/tty udev[/tty] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/urandom udev[/urandom] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/zero udev[/zero] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/ptmx devpts[/ptmx] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/console devpts[/0] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/tty1 devpts[/1] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | `-/dev/tty2 devpts[/2] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 |-/proc proc proc rw,nosuid,nodev,noexec,relatime | |-/proc/sys proc[/sys] proc ro,relatime | | |-/proc/sys/net proc[/sys/net] proc rw,nosuid,nodev,noexec,relatime | | |-/proc/sys/kernel/random/boot_id none[/.lxc-boot-id] tmpfs ro,nosuid,nodev,noexec,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime | |-/proc/sysrq-trigger proc[/sysrq-trigger] proc ro,relatime | |-/proc/cpuinfo lxcfs[/proc/cpuinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/diskstats lxcfs[/proc/diskstats] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/loadavg lxcfs[/proc/loadavg] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/meminfo lxcfs[/proc/meminfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/slabinfo lxcfs[/proc/slabinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/stat lxcfs[/proc/stat] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/swaps lxcfs[/proc/swaps] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | `-/proc/uptime lxcfs[/proc/uptime] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other `-/sys sysfs sysfs ro,nosuid,nodev,noexec,relatime |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/sys/devices/virtual/net sysfs[/devices/virtual/net] sysfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime |-/sys/firmware/efi/efivars efivarfs efivarfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/cgroup none cgroup2 rw,nosuid,nodev,noexec,relatime `-/sys/devices/system/cpu lxcfs[/sys/devices/system/cpu] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other Files in neuralgic directories: /var: 596M /var/ 249M /var/cache 243M /var/cache/apt 234M /var/lib 155M /var/cache/apt/archives Archived and active journals take up 108.9M in the file system. /opt/iobroker/backups: 15M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 68M /opt/iobroker/iobroker-data/ 36M /opt/iobroker/iobroker-data/backup-objects 15M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 9.1M /opt/iobroker/iobroker-data/objects.jsonl 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/states.jsonl 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.15.0 /usr/bin/node v20.15.0 /usr/bin/npm 10.8.1 /usr/bin/npx 10.8.1 /usr/bin/corepack 0.28.1 nodejs: Installed: 20.15.0-1nodesource1 Candidate: 20.15.1-1nodesource1 Version table: 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages *** 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 18.13.0+dfsg1-1ubuntu2 500 500 http://archive.ubuntu.com/ubuntu lunar/universe amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Core adapters versions js-controller: 6.0.6 admin: 7.0.11 javascript: 8.6.0 nodejs modules from github: 1 `-- iobroker.zigbee2mqtt@2.13.9 (git+ssh://git@github.com/arteck/ioBroker.zigbee2mqtt.git#bbb7480f74e0fb4de22dfbf4b5b2e9b6839151ef) Adapter State + system.adapter.admin.0 : admin : iosrv - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.admin.1 : admin : iosrv - disabled, port: 9081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.admin.2 : admin : iosrv3 - disabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.admin.3 : admin : apsrv6 - disabled, port: 8081, bind: 10.19.81.162, run as: admin + system.adapter.alexa2.0 : alexa2 : iosrv3 - enabled system.adapter.alias-manager.0 : alias-manager : iosrv - disabled system.adapter.awattar.0 : awattar : ioslave5 - enabled system.adapter.backitup.0 : backitup : iosrv - disabled + system.adapter.backitup.1 : backitup : ioslave2 - enabled system.adapter.backitup.2 : backitup : iosrv3 - disabled + system.adapter.device-watcher.0 : device-watcher : iosrv - enabled system.adapter.discovery.0 : discovery : iosrv - disabled system.adapter.email.0 : email : iosrv - disabled + system.adapter.eusec.0 : eusec : iosrv3 - enabled system.adapter.flot.0 : flot : iosrv - disabled system.adapter.go-e.0 : go-e : iosrv - disabled + system.adapter.hm-rega.0 : hm-rega : iosrv3 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iosrv - enabled, port: 8086 system.adapter.info.0 : info : iosrv - enabled + system.adapter.iot.0 : iot : iosrv3 - enabled + system.adapter.javascript.0 : javascript : iosrv - enabled + system.adapter.javascript.1 : javascript : ioslave5 - enabled + system.adapter.javascript.11 : javascript : iosrv - enabled + system.adapter.javascript.12 : javascript : iosrv - enabled + system.adapter.javascript.13 : javascript : ioslave5 - enabled + system.adapter.javascript.21 : javascript : ioslave2 - enabled + system.adapter.javascript.31 : javascript : iosrv2 - enabled + system.adapter.javascript.41 : javascript : iosrv3 - enabled system.adapter.js2fs.0 : js2fs : iosrv - disabled + system.adapter.mqtt.1 : mqtt : iosrv2 - enabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : apsrv6 - enabled + system.adapter.node-red.0 : node-red : iosrv - enabled, port: 1880, bind: :: (SSL) system.adapter.node-red.1 : node-red : ioslave3 - disabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.node-red.2 : node-red : iosrv2 - enabled, port: 1880, bind: 0.0.0.0 (SSL) system.adapter.node-red.3 : node-red : ioslave5 - disabled, port: 1880, bind: 0.0.0.0 + system.adapter.node-red.4 : node-red : iosrv3 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.rest-api.0 : rest-api : iosrv - enabled, port: 8093, bind: 0.0.0.0, run as: admin system.adapter.ring.0 : ring : iosrv3 - disabled + system.adapter.scenes.0 : scenes : iosrv - enabled + system.adapter.shelly.1 : shelly : iosrv - enabled, port: 9881, bind: 10.19.1.111 + system.adapter.simple-api.0 : simple-api : iosrv - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.smartmeter.0 : smartmeter : ioslave2 - disabled + system.adapter.smartmeter.1 : smartmeter : ioslave2 - enabled + system.adapter.smartthings.0 : smartthings : iosrv2 - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iosrv - enabled + system.adapter.statistics.0 : statistics : iosrv - enabled + system.adapter.statistics.1 : statistics : iosrv3 - enabled + system.adapter.telegram.0 : telegram : iosrv3 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : apsrv6 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iosrv3 - enabled + system.adapter.tr-064.0 : tr-064 : iosrv3 - enabled + system.adapter.tuya.0 : tuya : iosrv3 - enabled + system.adapter.velux.0 : velux : iosrv3 - enabled system.adapter.vw-connect.0 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.1 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.2 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.3 : vw-connect : apsrv6 - disabled + system.adapter.web.0 : web : iosrv3 - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin system.adapter.web.1 : web : iosrv - disabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : iosrv2 - enabled + system.adapter.worx.0 : worx : apsrv6 - enabled + system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iosrv2 - enabled + system.adapter.zwave2.0 : zwave2 : ioslave2 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iosrv - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iosrv - enabled, port: 8086 + system.adapter.mqtt.1 : mqtt : iosrv2 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iosrv - enabled, port: 1880, bind: :: (SSL) + system.adapter.node-red.2 : node-red : iosrv2 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.node-red.4 : node-red : iosrv3 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.rest-api.0 : rest-api : iosrv - enabled, port: 8093, bind: 0.0.0.0, run as: admin + system.adapter.shelly.1 : shelly : iosrv - enabled, port: 9881, bind: 10.19.1.111 + system.adapter.simple-api.0 : simple-api : iosrv - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iosrv3 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : apsrv6 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iosrv3 - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Beta (latest) Installed ioBroker-Instances Used repository: Beta (latest) Adapter "admin" : 7.0.11 , installed 7.0.11 Adapter "backitup" : 3.0.8 , installed 3.0.8 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "javascript" : 8.6.0 , installed 8.6.0 Controller "js-controller": 6.0.6 , installed 6.0.6 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "smartthings" : 0.1.2 , installed 0.1.2 Adapter "wled" : 0.7.3-beta.0, installed 0.7.3-beta.0 Adapter "zigbee2mqtt" : 2.13.6 , installed 2.13.9 Objects and States Please stand by - This may take a while Objects: 60055 States: 38922 *** OS-Repositories and Updates *** Hit:1 http://archive.ubuntu.com/ubuntu lunar InRelease Hit:2 http://archive.ubuntu.com/ubuntu lunar-updates InRelease Hit:3 http://archive.ubuntu.com/ubuntu lunar-security InRelease Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 22641763 340/master tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1000 26560773 30590/node-red tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 22635876 1/init tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 996 22637916 104/systemd-resolve tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 996 22637914 104/systemd-resolve tcp6 0 0 :::22 :::* LISTEN 0 22636005 1/init tcp6 0 0 :::111 :::* LISTEN 0 22635878 1/init tcp6 0 0 ::1:25 :::* LISTEN 0 22641764 340/master udp 0 0 127.0.0.54:53 0.0.0.0:* 996 22637915 104/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 996 22637913 104/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 22635877 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 26271211 27482/io.wled.0 udp6 0 0 :::111 :::* 0 22635879 1/init udp6 0 0 fe80::c0f3:2eff:fe5:546 :::* 998 22640755 100/systemd-network *** Log File - Last 25 Lines *** 2024-07-09 14:58:20.536 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a5eac.occupancy 1720537100534 1720537100536 Diff: 2 2024-07-09 14:59:49.941 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a2c12.occupancy 1720537189940 1720537189941 Diff: 1 2024-07-09 15:01:11.792 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x842e14fffe888db3.occupancy 1720537264910 1720537271792 Diff: 6882 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d000279d7a2.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d00027a2c12.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d00027a5eac.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880102019335.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880106f731c9.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010917b044.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109181f46.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109182d1b.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109189488.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010918a44c.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010bcfc276.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010cd59ddc.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010df66ead.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x14b457fffe6b0459.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x14b457fffe7e1d5d.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x842e14fffe888db3.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0xccccccfffe9106ec.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0xecf64cfffe290e59.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.955 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: Sent to {"189503731":25253} users 2024-07-09 15:01:20.536 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a5eac.occupancy 1720537280535 1720537280536 Diff: 1 2024-07-09 15:01:30.423 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x001788010918a44c.occupancy 1720537290422 1720537290423 Diff: 1 2024-07-09 15:01:32.234 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x0017880102019335.occupancy 1720537292233 1720537292234 Diff: 1Man sieht im Log auch noch den Treffer mit Differenz von 6882ms von obj.state.ts zu Start der Ausführung der Funktion.
Vielleicht hat jemand ne Idee.
-
Hab jetzt mal ein bisschen geguckt und beobachtet. Es gibt keine Scripte, die große Mengen an setState pro 15 Sekunden haben.
Es scheint jedoch wirklich so zu sein, dass nach einem Neustart das Phänomen verschwindet und dann langsam wieder auftaucht. Zum testen habe ich gestern einen komplett frischen Host aufgesetzt und die Instanz dorthin verschoben, keine Änderung.Nachstehend mal iob diag von dem betroffenen Host:
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: iosrv2 Icon name: computer-container Chassis: container ☐ Virtualization: lxc Operating System: Ubuntu 23.04 Kernel: Linux 5.15.85-1-pve Architecture: x86-64 Firmware Version: CB9_FV102 model name : Intel(R) Core(TM) i5-8279U CPU @ 2.40GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 17:04:55 up 1 day, 4:47, 2 users, load average: 1.57, 1.23, 1.02 CPU threads: 6 *** Time and Time Zones *** Local time: Tue 2024-07-09 17:04:55 CEST Universal time: Tue 2024-07-09 15:04:55 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': root HOME=/root GROUPS=root User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 2.1G 996M 282M 122K 868M 1.2G Swap: 4.3G 8.2K 4.3G Total: 6.4G 996M 4.6G Active iob-Instances: 43 2048 M total memory 950 M used memory 535 M active memory 1095 M inactive memory 269 M free memory 0 M buffer memory 827 M swap cache 4096 M total swap 0 M used swap 4095 M free swap *** top - Table Of Processes *** top - 17:04:55 up 1 day, 4:47, 2 users, load average: 1.57, 1.23, 1.02 Tasks: 35 total, 1 running, 34 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 2048.0 total, 267.7 free, 952.3 used, 828.0 buff/cache MiB Swap: 4096.0 total, 4096.0 free, 0.0 used. 1095.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--118--disk--0 ext4 15G 3.4G 11G 24% / none tmpfs 492K 4.0K 488K 1% /dev tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.1G 120K 3.1G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--118--disk--0 ext4 rw,relatime,stripe=16 |-/run tmpfs tmpfs rw,nosuid,nodev,size=3244760k,nr_inodes=819200,mode=755,uid=100000,gid=100000,inode64 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k,uid=100000,gid=100000,inode64 | |-/run/credentials/systemd-sysctl.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/credentials/systemd-tmpfiles-setup-dev.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 |-/dev none tmpfs rw,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev,uid=100000,gid=100000,inode64 | |-/dev/mqueue mqueue mqueue rw,relatime | |-/dev/.lxc/proc proc proc rw,relatime | |-/dev/.lxc/sys sys sysfs rw,relatime | |-/dev/full udev[/full] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/null udev[/null] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/random udev[/random] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/tty udev[/tty] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/urandom udev[/urandom] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/zero udev[/zero] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/ptmx devpts[/ptmx] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/console devpts[/0] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/tty1 devpts[/1] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | `-/dev/tty2 devpts[/2] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 |-/proc proc proc rw,nosuid,nodev,noexec,relatime | |-/proc/sys proc[/sys] proc ro,relatime | | |-/proc/sys/net proc[/sys/net] proc rw,nosuid,nodev,noexec,relatime | | |-/proc/sys/kernel/random/boot_id none[/.lxc-boot-id] tmpfs ro,nosuid,nodev,noexec,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime | |-/proc/sysrq-trigger proc[/sysrq-trigger] proc ro,relatime | |-/proc/cpuinfo lxcfs[/proc/cpuinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/diskstats lxcfs[/proc/diskstats] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/loadavg lxcfs[/proc/loadavg] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/meminfo lxcfs[/proc/meminfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/slabinfo lxcfs[/proc/slabinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/stat lxcfs[/proc/stat] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/swaps lxcfs[/proc/swaps] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | `-/proc/uptime lxcfs[/proc/uptime] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other `-/sys sysfs sysfs ro,nosuid,nodev,noexec,relatime |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/sys/devices/virtual/net sysfs[/devices/virtual/net] sysfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime |-/sys/firmware/efi/efivars efivarfs efivarfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/cgroup none cgroup2 rw,nosuid,nodev,noexec,relatime `-/sys/devices/system/cpu lxcfs[/sys/devices/system/cpu] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other Files in neuralgic directories: /var: 596M /var/ 249M /var/cache 243M /var/cache/apt 234M /var/lib 155M /var/cache/apt/archives Archived and active journals take up 108.9M in the file system. /opt/iobroker/backups: 15M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 68M /opt/iobroker/iobroker-data/ 36M /opt/iobroker/iobroker-data/backup-objects 15M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 9.1M /opt/iobroker/iobroker-data/objects.jsonl 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/states.jsonl 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.15.0 /usr/bin/node v20.15.0 /usr/bin/npm 10.8.1 /usr/bin/npx 10.8.1 /usr/bin/corepack 0.28.1 nodejs: Installed: 20.15.0-1nodesource1 Candidate: 20.15.1-1nodesource1 Version table: 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages *** 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 18.13.0+dfsg1-1ubuntu2 500 500 http://archive.ubuntu.com/ubuntu lunar/universe amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Core adapters versions js-controller: 6.0.6 admin: 7.0.11 javascript: 8.6.0 nodejs modules from github: 1 `-- iobroker.zigbee2mqtt@2.13.9 (git+ssh://git@github.com/arteck/ioBroker.zigbee2mqtt.git#bbb7480f74e0fb4de22dfbf4b5b2e9b6839151ef) Adapter State + system.adapter.admin.0 : admin : iosrv - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.admin.1 : admin : iosrv - disabled, port: 9081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.admin.2 : admin : iosrv3 - disabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.admin.3 : admin : apsrv6 - disabled, port: 8081, bind: 10.19.81.162, run as: admin + system.adapter.alexa2.0 : alexa2 : iosrv3 - enabled system.adapter.alias-manager.0 : alias-manager : iosrv - disabled system.adapter.awattar.0 : awattar : ioslave5 - enabled system.adapter.backitup.0 : backitup : iosrv - disabled + system.adapter.backitup.1 : backitup : ioslave2 - enabled system.adapter.backitup.2 : backitup : iosrv3 - disabled + system.adapter.device-watcher.0 : device-watcher : iosrv - enabled system.adapter.discovery.0 : discovery : iosrv - disabled system.adapter.email.0 : email : iosrv - disabled + system.adapter.eusec.0 : eusec : iosrv3 - enabled system.adapter.flot.0 : flot : iosrv - disabled system.adapter.go-e.0 : go-e : iosrv - disabled + system.adapter.hm-rega.0 : hm-rega : iosrv3 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iosrv - enabled, port: 8086 system.adapter.info.0 : info : iosrv - enabled + system.adapter.iot.0 : iot : iosrv3 - enabled + system.adapter.javascript.0 : javascript : iosrv - enabled + system.adapter.javascript.1 : javascript : ioslave5 - enabled + system.adapter.javascript.11 : javascript : iosrv - enabled + system.adapter.javascript.12 : javascript : iosrv - enabled + system.adapter.javascript.13 : javascript : ioslave5 - enabled + system.adapter.javascript.21 : javascript : ioslave2 - enabled + system.adapter.javascript.31 : javascript : iosrv2 - enabled + system.adapter.javascript.41 : javascript : iosrv3 - enabled system.adapter.js2fs.0 : js2fs : iosrv - disabled + system.adapter.mqtt.1 : mqtt : iosrv2 - enabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : apsrv6 - enabled + system.adapter.node-red.0 : node-red : iosrv - enabled, port: 1880, bind: :: (SSL) system.adapter.node-red.1 : node-red : ioslave3 - disabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.node-red.2 : node-red : iosrv2 - enabled, port: 1880, bind: 0.0.0.0 (SSL) system.adapter.node-red.3 : node-red : ioslave5 - disabled, port: 1880, bind: 0.0.0.0 + system.adapter.node-red.4 : node-red : iosrv3 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.rest-api.0 : rest-api : iosrv - enabled, port: 8093, bind: 0.0.0.0, run as: admin system.adapter.ring.0 : ring : iosrv3 - disabled + system.adapter.scenes.0 : scenes : iosrv - enabled + system.adapter.shelly.1 : shelly : iosrv - enabled, port: 9881, bind: 10.19.1.111 + system.adapter.simple-api.0 : simple-api : iosrv - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.smartmeter.0 : smartmeter : ioslave2 - disabled + system.adapter.smartmeter.1 : smartmeter : ioslave2 - enabled + system.adapter.smartthings.0 : smartthings : iosrv2 - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iosrv - enabled + system.adapter.statistics.0 : statistics : iosrv - enabled + system.adapter.statistics.1 : statistics : iosrv3 - enabled + system.adapter.telegram.0 : telegram : iosrv3 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : apsrv6 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iosrv3 - enabled + system.adapter.tr-064.0 : tr-064 : iosrv3 - enabled + system.adapter.tuya.0 : tuya : iosrv3 - enabled + system.adapter.velux.0 : velux : iosrv3 - enabled system.adapter.vw-connect.0 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.1 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.2 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.3 : vw-connect : apsrv6 - disabled + system.adapter.web.0 : web : iosrv3 - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin system.adapter.web.1 : web : iosrv - disabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : iosrv2 - enabled + system.adapter.worx.0 : worx : apsrv6 - enabled + system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iosrv2 - enabled + system.adapter.zwave2.0 : zwave2 : ioslave2 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iosrv - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iosrv - enabled, port: 8086 + system.adapter.mqtt.1 : mqtt : iosrv2 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iosrv - enabled, port: 1880, bind: :: (SSL) + system.adapter.node-red.2 : node-red : iosrv2 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.node-red.4 : node-red : iosrv3 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.rest-api.0 : rest-api : iosrv - enabled, port: 8093, bind: 0.0.0.0, run as: admin + system.adapter.shelly.1 : shelly : iosrv - enabled, port: 9881, bind: 10.19.1.111 + system.adapter.simple-api.0 : simple-api : iosrv - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iosrv3 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : apsrv6 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iosrv3 - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Beta (latest) Installed ioBroker-Instances Used repository: Beta (latest) Adapter "admin" : 7.0.11 , installed 7.0.11 Adapter "backitup" : 3.0.8 , installed 3.0.8 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "javascript" : 8.6.0 , installed 8.6.0 Controller "js-controller": 6.0.6 , installed 6.0.6 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "smartthings" : 0.1.2 , installed 0.1.2 Adapter "wled" : 0.7.3-beta.0, installed 0.7.3-beta.0 Adapter "zigbee2mqtt" : 2.13.6 , installed 2.13.9 Objects and States Please stand by - This may take a while Objects: 60055 States: 38922 *** OS-Repositories and Updates *** Hit:1 http://archive.ubuntu.com/ubuntu lunar InRelease Hit:2 http://archive.ubuntu.com/ubuntu lunar-updates InRelease Hit:3 http://archive.ubuntu.com/ubuntu lunar-security InRelease Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 22641763 340/master tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1000 26560773 30590/node-red tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 22635876 1/init tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 996 22637916 104/systemd-resolve tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 996 22637914 104/systemd-resolve tcp6 0 0 :::22 :::* LISTEN 0 22636005 1/init tcp6 0 0 :::111 :::* LISTEN 0 22635878 1/init tcp6 0 0 ::1:25 :::* LISTEN 0 22641764 340/master udp 0 0 127.0.0.54:53 0.0.0.0:* 996 22637915 104/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 996 22637913 104/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 22635877 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 26271211 27482/io.wled.0 udp6 0 0 :::111 :::* 0 22635879 1/init udp6 0 0 fe80::c0f3:2eff:fe5:546 :::* 998 22640755 100/systemd-network *** Log File - Last 25 Lines *** 2024-07-09 14:58:20.536 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a5eac.occupancy 1720537100534 1720537100536 Diff: 2 2024-07-09 14:59:49.941 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a2c12.occupancy 1720537189940 1720537189941 Diff: 1 2024-07-09 15:01:11.792 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x842e14fffe888db3.occupancy 1720537264910 1720537271792 Diff: 6882 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d000279d7a2.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d00027a2c12.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d00027a5eac.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880102019335.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880106f731c9.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010917b044.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109181f46.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109182d1b.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109189488.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010918a44c.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010bcfc276.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010cd59ddc.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010df66ead.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x14b457fffe6b0459.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x14b457fffe7e1d5d.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x842e14fffe888db3.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0xccccccfffe9106ec.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0xecf64cfffe290e59.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.955 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: Sent to {"189503731":25253} users 2024-07-09 15:01:20.536 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a5eac.occupancy 1720537280535 1720537280536 Diff: 1 2024-07-09 15:01:30.423 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x001788010918a44c.occupancy 1720537290422 1720537290423 Diff: 1 2024-07-09 15:01:32.234 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x0017880102019335.occupancy 1720537292233 1720537292234 Diff: 1Man sieht im Log auch noch den Treffer mit Differenz von 6882ms von obj.state.ts zu Start der Ausführung der Funktion.
Vielleicht hat jemand ne Idee.
@pepp86 sagte in Perfomance / Delay im Javascript Adapter:
Operating System: Ubuntu 23.04
Abgekündigt, installier da was lebendiges.
Hampel da nicht als root durch den Container.
Stell das Boot Target auf multi-user.target. -
Hab jetzt mal ein bisschen geguckt und beobachtet. Es gibt keine Scripte, die große Mengen an setState pro 15 Sekunden haben.
Es scheint jedoch wirklich so zu sein, dass nach einem Neustart das Phänomen verschwindet und dann langsam wieder auftaucht. Zum testen habe ich gestern einen komplett frischen Host aufgesetzt und die Instanz dorthin verschoben, keine Änderung.Nachstehend mal iob diag von dem betroffenen Host:
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: iosrv2 Icon name: computer-container Chassis: container ☐ Virtualization: lxc Operating System: Ubuntu 23.04 Kernel: Linux 5.15.85-1-pve Architecture: x86-64 Firmware Version: CB9_FV102 model name : Intel(R) Core(TM) i5-8279U CPU @ 2.40GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 17:04:55 up 1 day, 4:47, 2 users, load average: 1.57, 1.23, 1.02 CPU threads: 6 *** Time and Time Zones *** Local time: Tue 2024-07-09 17:04:55 CEST Universal time: Tue 2024-07-09 15:04:55 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': root HOME=/root GROUPS=root User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 2.1G 996M 282M 122K 868M 1.2G Swap: 4.3G 8.2K 4.3G Total: 6.4G 996M 4.6G Active iob-Instances: 43 2048 M total memory 950 M used memory 535 M active memory 1095 M inactive memory 269 M free memory 0 M buffer memory 827 M swap cache 4096 M total swap 0 M used swap 4095 M free swap *** top - Table Of Processes *** top - 17:04:55 up 1 day, 4:47, 2 users, load average: 1.57, 1.23, 1.02 Tasks: 35 total, 1 running, 34 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 2048.0 total, 267.7 free, 952.3 used, 828.0 buff/cache MiB Swap: 4096.0 total, 4096.0 free, 0.0 used. 1095.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--118--disk--0 ext4 15G 3.4G 11G 24% / none tmpfs 492K 4.0K 488K 1% /dev tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.1G 120K 3.1G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--118--disk--0 ext4 rw,relatime,stripe=16 |-/run tmpfs tmpfs rw,nosuid,nodev,size=3244760k,nr_inodes=819200,mode=755,uid=100000,gid=100000,inode64 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k,uid=100000,gid=100000,inode64 | |-/run/credentials/systemd-sysctl.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/credentials/systemd-tmpfiles-setup-dev.service none ramfs ro,nosuid,nodev,noexec,relatime,mode=700 |-/dev none tmpfs rw,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev,uid=100000,gid=100000,inode64 | |-/dev/mqueue mqueue mqueue rw,relatime | |-/dev/.lxc/proc proc proc rw,relatime | |-/dev/.lxc/sys sys sysfs rw,relatime | |-/dev/full udev[/full] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/null udev[/null] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/random udev[/random] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/tty udev[/tty] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/urandom udev[/urandom] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/zero udev[/zero] devtmpfs rw,nosuid,relatime,size=8078200k,nr_inodes=2019550,mode=755,inode64 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/ptmx devpts[/ptmx] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/console devpts[/0] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/tty1 devpts[/1] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | `-/dev/tty2 devpts[/2] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 |-/proc proc proc rw,nosuid,nodev,noexec,relatime | |-/proc/sys proc[/sys] proc ro,relatime | | |-/proc/sys/net proc[/sys/net] proc rw,nosuid,nodev,noexec,relatime | | |-/proc/sys/kernel/random/boot_id none[/.lxc-boot-id] tmpfs ro,nosuid,nodev,noexec,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime | |-/proc/sysrq-trigger proc[/sysrq-trigger] proc ro,relatime | |-/proc/cpuinfo lxcfs[/proc/cpuinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/diskstats lxcfs[/proc/diskstats] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/loadavg lxcfs[/proc/loadavg] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/meminfo lxcfs[/proc/meminfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/slabinfo lxcfs[/proc/slabinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/stat lxcfs[/proc/stat] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/swaps lxcfs[/proc/swaps] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | `-/proc/uptime lxcfs[/proc/uptime] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other `-/sys sysfs sysfs ro,nosuid,nodev,noexec,relatime |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/sys/devices/virtual/net sysfs[/devices/virtual/net] sysfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime |-/sys/firmware/efi/efivars efivarfs efivarfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/cgroup none cgroup2 rw,nosuid,nodev,noexec,relatime `-/sys/devices/system/cpu lxcfs[/sys/devices/system/cpu] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other Files in neuralgic directories: /var: 596M /var/ 249M /var/cache 243M /var/cache/apt 234M /var/lib 155M /var/cache/apt/archives Archived and active journals take up 108.9M in the file system. /opt/iobroker/backups: 15M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 68M /opt/iobroker/iobroker-data/ 36M /opt/iobroker/iobroker-data/backup-objects 15M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 9.1M /opt/iobroker/iobroker-data/objects.jsonl 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/states.jsonl 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.15.0 /usr/bin/node v20.15.0 /usr/bin/npm 10.8.1 /usr/bin/npx 10.8.1 /usr/bin/corepack 0.28.1 nodejs: Installed: 20.15.0-1nodesource1 Candidate: 20.15.1-1nodesource1 Version table: 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages *** 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 18.13.0+dfsg1-1ubuntu2 500 500 http://archive.ubuntu.com/ubuntu lunar/universe amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Core adapters versions js-controller: 6.0.6 admin: 7.0.11 javascript: 8.6.0 nodejs modules from github: 1 `-- iobroker.zigbee2mqtt@2.13.9 (git+ssh://git@github.com/arteck/ioBroker.zigbee2mqtt.git#bbb7480f74e0fb4de22dfbf4b5b2e9b6839151ef) Adapter State + system.adapter.admin.0 : admin : iosrv - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.admin.1 : admin : iosrv - disabled, port: 9081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.admin.2 : admin : iosrv3 - disabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.admin.3 : admin : apsrv6 - disabled, port: 8081, bind: 10.19.81.162, run as: admin + system.adapter.alexa2.0 : alexa2 : iosrv3 - enabled system.adapter.alias-manager.0 : alias-manager : iosrv - disabled system.adapter.awattar.0 : awattar : ioslave5 - enabled system.adapter.backitup.0 : backitup : iosrv - disabled + system.adapter.backitup.1 : backitup : ioslave2 - enabled system.adapter.backitup.2 : backitup : iosrv3 - disabled + system.adapter.device-watcher.0 : device-watcher : iosrv - enabled system.adapter.discovery.0 : discovery : iosrv - disabled system.adapter.email.0 : email : iosrv - disabled + system.adapter.eusec.0 : eusec : iosrv3 - enabled system.adapter.flot.0 : flot : iosrv - disabled system.adapter.go-e.0 : go-e : iosrv - disabled + system.adapter.hm-rega.0 : hm-rega : iosrv3 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iosrv - enabled, port: 8086 system.adapter.info.0 : info : iosrv - enabled + system.adapter.iot.0 : iot : iosrv3 - enabled + system.adapter.javascript.0 : javascript : iosrv - enabled + system.adapter.javascript.1 : javascript : ioslave5 - enabled + system.adapter.javascript.11 : javascript : iosrv - enabled + system.adapter.javascript.12 : javascript : iosrv - enabled + system.adapter.javascript.13 : javascript : ioslave5 - enabled + system.adapter.javascript.21 : javascript : ioslave2 - enabled + system.adapter.javascript.31 : javascript : iosrv2 - enabled + system.adapter.javascript.41 : javascript : iosrv3 - enabled system.adapter.js2fs.0 : js2fs : iosrv - disabled + system.adapter.mqtt.1 : mqtt : iosrv2 - enabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : apsrv6 - enabled + system.adapter.node-red.0 : node-red : iosrv - enabled, port: 1880, bind: :: (SSL) system.adapter.node-red.1 : node-red : ioslave3 - disabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.node-red.2 : node-red : iosrv2 - enabled, port: 1880, bind: 0.0.0.0 (SSL) system.adapter.node-red.3 : node-red : ioslave5 - disabled, port: 1880, bind: 0.0.0.0 + system.adapter.node-red.4 : node-red : iosrv3 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.rest-api.0 : rest-api : iosrv - enabled, port: 8093, bind: 0.0.0.0, run as: admin system.adapter.ring.0 : ring : iosrv3 - disabled + system.adapter.scenes.0 : scenes : iosrv - enabled + system.adapter.shelly.1 : shelly : iosrv - enabled, port: 9881, bind: 10.19.1.111 + system.adapter.simple-api.0 : simple-api : iosrv - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.smartmeter.0 : smartmeter : ioslave2 - disabled + system.adapter.smartmeter.1 : smartmeter : ioslave2 - enabled + system.adapter.smartthings.0 : smartthings : iosrv2 - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iosrv - enabled + system.adapter.statistics.0 : statistics : iosrv - enabled + system.adapter.statistics.1 : statistics : iosrv3 - enabled + system.adapter.telegram.0 : telegram : iosrv3 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : apsrv6 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iosrv3 - enabled + system.adapter.tr-064.0 : tr-064 : iosrv3 - enabled + system.adapter.tuya.0 : tuya : iosrv3 - enabled + system.adapter.velux.0 : velux : iosrv3 - enabled system.adapter.vw-connect.0 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.1 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.2 : vw-connect : apsrv6 - disabled system.adapter.vw-connect.3 : vw-connect : apsrv6 - disabled + system.adapter.web.0 : web : iosrv3 - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin system.adapter.web.1 : web : iosrv - disabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : iosrv2 - enabled + system.adapter.worx.0 : worx : apsrv6 - enabled + system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iosrv2 - enabled + system.adapter.zwave2.0 : zwave2 : ioslave2 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iosrv - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iosrv3 - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iosrv - enabled, port: 8086 + system.adapter.mqtt.1 : mqtt : iosrv2 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iosrv - enabled, port: 1880, bind: :: (SSL) + system.adapter.node-red.2 : node-red : iosrv2 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.node-red.4 : node-red : iosrv3 - enabled, port: 1880, bind: 0.0.0.0 (SSL) + system.adapter.rest-api.0 : rest-api : iosrv - enabled, port: 8093, bind: 0.0.0.0, run as: admin + system.adapter.shelly.1 : shelly : iosrv - enabled, port: 9881, bind: 10.19.1.111 + system.adapter.simple-api.0 : simple-api : iosrv - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iosrv3 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : apsrv6 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iosrv3 - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Beta (latest) Installed ioBroker-Instances Used repository: Beta (latest) Adapter "admin" : 7.0.11 , installed 7.0.11 Adapter "backitup" : 3.0.8 , installed 3.0.8 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "javascript" : 8.6.0 , installed 8.6.0 Controller "js-controller": 6.0.6 , installed 6.0.6 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "smartthings" : 0.1.2 , installed 0.1.2 Adapter "wled" : 0.7.3-beta.0, installed 0.7.3-beta.0 Adapter "zigbee2mqtt" : 2.13.6 , installed 2.13.9 Objects and States Please stand by - This may take a while Objects: 60055 States: 38922 *** OS-Repositories and Updates *** Hit:1 http://archive.ubuntu.com/ubuntu lunar InRelease Hit:2 http://archive.ubuntu.com/ubuntu lunar-updates InRelease Hit:3 http://archive.ubuntu.com/ubuntu lunar-security InRelease Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 22641763 340/master tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1000 26560773 30590/node-red tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 22635876 1/init tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 996 22637916 104/systemd-resolve tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 996 22637914 104/systemd-resolve tcp6 0 0 :::22 :::* LISTEN 0 22636005 1/init tcp6 0 0 :::111 :::* LISTEN 0 22635878 1/init tcp6 0 0 ::1:25 :::* LISTEN 0 22641764 340/master udp 0 0 127.0.0.54:53 0.0.0.0:* 996 22637915 104/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 996 22637913 104/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 22635877 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 26271211 27482/io.wled.0 udp6 0 0 :::111 :::* 0 22635879 1/init udp6 0 0 fe80::c0f3:2eff:fe5:546 :::* 998 22640755 100/systemd-network *** Log File - Last 25 Lines *** 2024-07-09 14:58:20.536 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a5eac.occupancy 1720537100534 1720537100536 Diff: 2 2024-07-09 14:59:49.941 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a2c12.occupancy 1720537189940 1720537189941 Diff: 1 2024-07-09 15:01:11.792 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x842e14fffe888db3.occupancy 1720537264910 1720537271792 Diff: 6882 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d000279d7a2.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d00027a2c12.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x00158d00027a5eac.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880102019335.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880106f731c9.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010917b044.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109181f46.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109182d1b.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x0017880109189488.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.793 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010918a44c.occupancy Timestamp: 1720537271793 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010bcfc276.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010cd59ddc.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x001788010df66ead.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x14b457fffe6b0459.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x14b457fffe7e1d5d.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0x842e14fffe888db3.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0xccccccfffe9106ec.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.794 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG Durchlauf ID: zigbee2mqtt.0.0xecf64cfffe290e59.occupancy Timestamp: 1720537271794 2024-07-09 15:01:11.955 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: Sent to {"189503731":25253} users 2024-07-09 15:01:20.536 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x00158d00027a5eac.occupancy 1720537280535 1720537280536 Diff: 1 2024-07-09 15:01:30.423 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x001788010918a44c.occupancy 1720537290422 1720537290423 Diff: 1 2024-07-09 15:01:32.234 - info: javascript.31 (8895) script.js.Haussteuerung.BWM_Innen: BWM Innen DEBUG - ausgelöst und Script gestartet durch: zigbee2mqtt.0.0x0017880102019335.occupancy 1720537292233 1720537292234 Diff: 1Man sieht im Log auch noch den Treffer mit Differenz von 6882ms von obj.state.ts zu Start der Ausführung der Funktion.
Vielleicht hat jemand ne Idee.
-
@pepp86 sagte: Es gibt keine Scripte, die große Mengen an setState pro 15 Sekunden haben.
Hast du es mit allen 8 JS-Instanzen getestet?
-
Moin,
ich habe jetzt viel getestet in den letzten Tagen. Inklusive Aufsetzen von Testsystemen (Debian vs. Ubuntu / Container vs. VM).
Es scheint, als ob das Problem mit der Javascript Instanz "mitwandert". Schiebe ich die Skripte in eine neue Instanz auf einem neuen System, läuft alles perfekt. Schiebe ich die problematische Instanz auf den neuen Host, wandern die Probleme mit.Meine Frage ist nun, gibt es irgendwo "versteckte" Konfigurationen einer Instanz wo vielleicht irgendwas quer hängen kann? Jemand ne Idee? Ansonsten setze ich einfach komplett neue Instanzen auf und verschiebe alle Skripte.
Danke!
-
@pepp86 sagte: Idee wie man so einen Übeltäter am schnellsten findet?
Wenn ein Skript die Ursache ist, sollte das folgende Testskript die 4 am häufigsten sendenden Skripte im Log alle 15 s zeigen:
const ids = $('javascript.0.scriptEnabled.*'); const scripts = []; const objects = []; ids.each(function(id) { const script = id.replace('javascript.0.scriptEnabled.', 'script.js.'); scripts.push(script); const obj = {script: script.replace('script.js.', ''), cnt: 0}; objects.push(obj); }); on({id: /.*/, from: 'system.adapter.javascript.0'}, function(dp) { const script = dp.state.c; if(script) { const idx = scripts.indexOf(script); if(idx >= 0) objects[idx].cnt++; } }); schedule('*/15 * * * * *', function() { setTimeout(function() { const sorted = []; for(let i = 0; i < objects.length; i++) { sorted[i] = objects[i]; } sorted.sort(function(a,b) { return b.cnt - a.cnt; }); sorted.length = 4; log(sorted); }, 100); });@paul53 sagte in Perfomance / Delay im Javascript Adapter:
Wenn ein Skript die Ursache ist, sollte das folgende Testskript die 4 am häufigsten sendenden Skripte im Log alle 15 s zeigen:
danke dafür :)
969
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge