Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[simatec]

@icke2002 kopiere bitte einfach aus dem Log die Daten raus...
Danach in Code Format hier posten... Dafür gibt es in der Menüleiste hier im Forum den Button </>

[icke2002]

@simatec Sorry - aber ich bin neu hier! Welcher ist das?

[icke2002]

so richtig?

local request: "sn'. " XXXXXXXXXX","ver":"3.015.02", type":22,"Data" (2260,9,4999,196,1260,0,0,10, 15,0,2,0,0,201,0,0,0,0,0,608,0,2, 1500,45,43,0,1,0,1348,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,65425,65535,3257,0,15314,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,],Informationen"|1.5,22, XXXXXXXXXXXXX", 8,0.21,0,0.23,0,0,1]}

solaxRequest: ("success" true," exception". "Query success!""result": "inverterSN": "XXXXXXXXXXXXX""'sn".'XXXXXXXXXX","acpower": 181,"yieldtoday":0.2,yieldtotal": 60.8"feedinpower": 106,"feedinenergy": 32.57,"consumeenergy": 153.13, inverter Type". "22","inverter Status"."102""uploadTime": "2024-06-27 08:25:00","powerdc 1": 186, "batStatus"null)," code": 0)

request-result: ("success" true,"exception" "Query success!" result": "inverterSN" XXXXXXXXXXXXXXX", sn"."XXXXXXXXXX"," acpower": 181,"yieldtoday :0.2, "ieldtotal": 60.8, Feedinpower"-106,"eedinenergy":32.57,' consumeenergy": 153.13,feedinpowerM2": null, soc" null" peps 1": null" peps2" null," peps3". null, inverter Type" "22", inverter Status". "102""uploadTime":"2024-06-27 08:25:00" "batPower":null,"powerdc1":186,"powerdc2":0,"powerdc3":0,"powerdc4":0,"batStatus":null),"code":0}

[simatec]

@icke2002 So ist das Format hier im Forum richtig... Aber warum schreibst du es alles ab... Da hast du Fehler eingebaut... Bitte kopiere es einfach aus dem Log. Ich kann so nicht damit arbeiten

[icke2002]

@simatec

solaxRequest: {"success":true,"exception":"Query success!","result":{"inverterSN":"XXXXXXXXXXXXX","sn":"XXXXXXXXXX","acpower":1124,"yieldtoday":1.9,"yieldtotal":62.5,"feedinpower":780,"feedinenergy":33.37,"consumeenergy":153.33,"inverterType":"22","inverterStatus":"102","uploadTime":"2024-06-27 11:00:01","powerdc1":1145,"batStatus":null},"code":0}

request-result: {"success":true,"exception":"Query success!","result":{"inverterSN":"XXXXXXXXXXXXX","sn":"XXXXXXXXXX","acpower":1124,"yieldtoday":1.9,"yieldtotal":62.5,"feedinpower":780,"feedinenergy":33.37,"consumeenergy":153.33,"feedinpowerM2":null,"soc":null,"peps1":null,"peps2":null,"peps3":null,"inverterType":"22","inverterStatus":"102","uploadTime":"2024-06-27 11:00:01","batPower":null,"powerdc1":1145,"powerdc2":0,"powerdc3":0,"powerdc4":0,"batStatus":null},"code":0}

local request: {"sn":"XXXXXXXXXX","ver":"3.015.02","type":22,"Data":[2311,48,4998,1129,1206,0,0,10,95,0,2,0,0,1149,0,0,0,0,0,625,0,19,1500,62,54,0,1,0,1372,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,796,0,3338,0,15333,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"Information":[1.5,22,"XXXXXXXXXXXXXX",8,0.21,0,0.23,0,0,1]}

[simatec]

@icke2002
Kannst du mir nochmal beide API Auswertungen Stand jetzt schicken? Ich brauche nochmal aktuelle Werte zum vergleichen.
Bitte mache die Cloud Abfrage mal auf 5 Minuten und die Local Abfrage auf 1 Minute.
Schicke mir dann die Daten, wenn sowohl Cloud als auch Lokal zeitgleich abgefragt wurden

[icke2002]

@simatec mach ich nachher - bin unterwegs!

[icke2002]

@simatec Bitte schön!

local request: {"sn":"XXXXXXXXXX","ver":"3.015.02","type":22,"Data":[2310,64,4998,1505,1199,0,0,10,127,0,2,0,0,1532,0,0,0,0,0,649,0,42,1500,72,64,0,1,0,1391,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1253,0,3511,0,15333,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"Information":[1.5,22,"XXXXXXXXXXXXX",8,0.21,0,0.23,0,0,1]} 

solaxRequest: {"success":true,"exception":"Query success!","result":{"inverterSN":"XXXXXXXXXXXXX","sn":"XXXXXXXXXX","acpower":494,"yieldtoday":4.1,"yieldtotal":64.7,"feedinpower":183,"feedinenergy":35.01,"consumeenergy":153.33,"inverterType":"22","inverterStatus":"102","uploadTime":"2024-06-27 12:45:00","powerdc1":503,"batStatus":null},"code":0} 

request-result: {"success":true,"exception":"Query success!","result":{"inverterSN":"XXXXXXXXXXXXX","sn":"XXXXXXXXXX","acpower":494,"yieldtoday":4.1,"yieldtotal":64.7,"feedinpower":183,"feedinenergy":35.01,"consumeenergy":153.33,"feedinpowerM2":null,"soc":null,"peps1":null,"peps2":null,"peps3":null,"inverterType":"22","inverterStatus":"102","uploadTime":"2024-06-27 12:45:00","batPower":null,"powerdc1":503,"powerdc2":0,"powerdc3":0,"powerdc4":0,"batStatus":null},"code":0} 

[icke2002]

@simatec hier nochmal ungefähr zeitgleich (Differenz ca. 15 sec.):

local request: {"sn":"XXXXXXXXXX","ver":"3.015.02","type":22,"Data":[2306,64,4998,1519,1211,0,0,10,127,0,2,0,0,1545,0,0,0,0,0,653,0,46,1500,73,64,0,1,0,1394,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1187,0,3536,0,15333,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"Information":[1.5,22,"XXXXXXXXXXXXXX",8,0.21,0,0.23,0,0,1]} 

request-result: {"success":true,"exception":"Query success!","result":{"inverterSN":"XXXXXXXXXXXXXX","sn":"XXXXXXXXXX","acpower":1507,"yieldtoday":4.6,"yieldtotal":65.2,"feedinpower":1175,"feedinenergy":35.35,"consumeenergy":153.33,"feedinpowerM2":null,"soc":null,"peps1":null,"peps2":null,"peps3":null,"inverterType":"22","inverterStatus":"102","uploadTime":"2024-06-27 13:10:00","batPower":null,"powerdc1":1536,"powerdc2":0,"powerdc3":0,"powerdc4":0,"batStatus":null},"code":0} 

solaxRequest: {"success":true,"exception":"Query success!","result":{"inverterSN":"XXXXXXXXXXXXX","sn":"XXXXXXXXXX","acpower":1507,"yieldtoday":4.6,"yieldtotal":65.2,"feedinpower":1175,"feedinenergy":35.35,"consumeenergy":153.33,"inverterType":"22","inverterStatus":"102","uploadTime":"2024-06-27 13:10:00","powerdc1":1536,"batStatus":null},"code":

[simatec]

@icke2002
Lösche mal bitte Instanz 0
Danach mal eine Installation über Github vom Solax Adapter machen und die Instanz im Anschluss neu anlegen.
Nun sollten in Instanz 0 lokale Daten kommen und auch passen

[icke2002]

@simatec Leider immer noch dasselbe was mache ich falsch? Muss die beiden alten Versionen und den Adapter löschen?

[simatec]

@icke2002 Hast du die Github Version installiert?
Hast du vor der Installation Instanz 0 (lokale Abfrage) gelöscht?

[icke2002]

@simatec Ja, habe ich gelöscht und über die Katze 0.97 von GitHub installiert.

[simatec]

@icke2002 Zeige mal die Daten, die nun kommen

[simatec]

@icke2002 Auch nochmal zur Sicherheit im Tab Adapter ein Upload des Adapters mit der Pfeil hoch Taste machen

[icke2002]

@simatec ```
2024-06-27 16:01:10.354 debug local request: {"sn":"XXXXXXXXXX","ver":"3.015.02","type":22,"Data":[2350,41,5001,990,1218,0,0,10,82,0,2,0,0,1009,0,0,0,0,0,686,0,80,1500,74,65,0,1,0,1422,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,718,0,3777,0,15342,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"Information":[1.5,22,"XXXXXXXXXXXX",8,0.21,0,0.23,0,0,1]}

[simatec]

@icke2002

Nein bitte die States im Tab Objekte

[icke2002]

@simatec Instanz 0 ging erst nach löschen der Instanz1. Danach upload gemacht - keine Änderung?

[simatec]

@icke2002 Bitte die States (Objekte) zeigen

[icke2002]

@simatec