NEWS
Trigger nach einiger Zeit inaktiv
Skripten / Logik
23
Beiträge
8
Kommentatoren
1.7k
Aufrufe
5
Watching
-
@wildbill Diag-Ausgabe liefere ich gerne später nach.
In der Regel ist es immer nur ein Skript. Ganz selten waren auch mal zwei (leicht zeitversetzt) betroffen.
Eine etwas größere Änderung habe ich in den letzten Monaten jedoch in der Tat durchgeführt: Ich hatte ursprünglich meine Skripte auf vier JS-Instanzen aufgeteilt. Dies dann aber auf eine einzelne Instanz reduziert.
Aber ich glaube, bei den meisten Anwendern laufen ja auch nur 1-2 Instanzen, oder?
@oxident Bei mir läuft nur eine. Andere haben eine zweite, die sie nur für Testzwecke verwenden. 4 auf einem Host machen IMHO keinen Sinn. Verbraucht nur mehr RAM und wenn iobroker steht, geht dennoch nix. Wenn verteilen, dann macht das nur Sinn mit Multihost, wenn man die „Last“ auf mehrere Hosts verteilt.
Gruss, Jürgen
-
@wildbill Diag-Ausgabe liefere ich gerne später nach.
In der Regel ist es immer nur ein Skript. Ganz selten waren auch mal zwei (leicht zeitversetzt) betroffen.
Eine etwas größere Änderung habe ich in den letzten Monaten jedoch in der Tat durchgeführt: Ich hatte ursprünglich meine Skripte auf vier JS-Instanzen aufgeteilt. Dies dann aber auf eine einzelne Instanz reduziert.
Aber ich glaube, bei den meisten Anwendern laufen ja auch nur 1-2 Instanzen, oder?
@oxident sagte in Trigger nach einiger Zeit inaktiv:
@wildbill Diag-Ausgabe liefere ich gerne später nach.
In der Regel ist es immer nur ein Skript. Ganz selten waren auch mal zwei (leicht zeitversetzt) betroffen.
Eine etwas größere Änderung habe ich in den letzten Monaten jedoch in der Tat durchgeführt: Ich hatte ursprünglich meine Skripte auf vier JS-Instanzen aufgeteilt. Dies dann aber auf eine einzelne Instanz reduziert.
Aber ich glaube, bei den meisten Anwendern laufen ja auch nur 1-2 Instanzen, oder?
Naja, ich nutze 2 Instanzen. Eine für den "Produktiv-Betrieb" und eine - wenn ich daran denke - zum Entwickeln.
Ich hatte es auch schon mehrmals geschafft mir mein System mit einer Endlosschleife abzuschießen. Der neuere JS-Adapter stoppt bei zu vielen Zugriffen pro Sekunde das entsprechende Skript:
kannst ja mal schauen was du für einen Wert dort hast. Ist der sehr hoch / nicht auf den 1.000 Default könntest du den ja mal heruntersetzen auf die 1.000 in der Hoffnung das er dann ein Amok laufendes Skript meldet und stoppt
-
@oxident Bei mir läuft nur eine. Andere haben eine zweite, die sie nur für Testzwecke verwenden. 4 auf einem Host machen IMHO keinen Sinn. Verbraucht nur mehr RAM und wenn iobroker steht, geht dennoch nix. Wenn verteilen, dann macht das nur Sinn mit Multihost, wenn man die „Last“ auf mehrere Hosts verteilt.
Gruss, Jürgen
@wildbill Okay, verstehe das mit dem Verteilen auf mehrere Hosts. Ich hatte bei den vier Instanzen eigentlich zwei Dinge im Sinn:
- Abschottung ganz wichtiger Skripte (Licht, usw.) von weniger wichtigen und Statistik-Sammlern. Nur für den Fall, dass es ein Skript doch irgendwie schafft, die Instanz zu killen
- Lastverteilung auf dem Host. Bei mir läuft iob auf einem RK3588 und der hat acht Kerne (glaube ich). Da ich in der Tat ein paar Skripte hab, die ziemlich aktiv sind (hauptsächlich PV-Speicher/-Überschuss-Steuerung) habe ich gemerkt, dass ich durchaus mehrere Kerne ganz gut auslasten kann, wenn mehrere JS-Prozesse laufen.
Aber letzten Endes habe ich es dann in der Tat wegen dem enormen RAM-Bedarf wieder geändert.
@BananaJoe Guter Punkt. Das steht bei mir aber in der Tat schon auf 1000.
-
So, hier noch die diag-Ausgabe. Seht ihr da Probleme?
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobrokernano Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.25 Architecture: arm64 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 06:28:44 up 25 days, 19:16, 2 users, load average: 2.46, 1.96, 1.89 CPU threads: 8 *** Time and Time Zones *** Local time: Fri 2024-03-08 06:28:44 CET Universal time: Fri 2024-03-08 05:28:44 UTC RTC time: Fri 2024-03-08 05:28:44 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** User and Groups *** pi /home/pi pi sudo iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 16G 7.1G 784M 3.3M 9.1G 9.6G Swap: 0B 0B 0B Total: 16G 7.1G 784M 15948 M total memory 6785 M used memory 5235 M active memory 9275 M inactive memory 747 M free memory 483 M buffer memory 8187 M swap cache 0 M total swap 0 M used swap 0 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * nvmf-autoconnect.service loaded failed failed Connect NVMe-oF subsystems automatically during boot LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.8G 0 7.8G 0% /dev tmpfs tmpfs 1.6G 2.4M 1.6G 1% /run overlay overlay 226G 15G 200G 7% / tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 5.0M 24K 5.0M 1% /run/lock /dev/nvme0n1p1 ext4 469G 11G 434G 3% /mnt/nvm tmpfs tmpfs 1.6G 8.0K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS /mnt/nvm /dev/nvme0n1p1 ext4 rw,noatime Files in neuralgic directories: /var: 971M /var/ 485M /var/lib 302M /var/lib/redis 270M /var/log 253M /var/log/journal/50d54139eb13431da5406ad3b6f26fbc Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 50.3M in the file system. /opt/iobroker/backups: 5.1G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 205M /opt/iobroker/iobroker-data/ 186M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors 186M /opt/iobroker/iobroker-data/esphome.0/.esphome/build 186M /opt/iobroker/iobroker-data/esphome.0/.esphome 186M /opt/iobroker/iobroker-data/esphome.0 The five largest files in iobroker-data are: 15M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/esp-idf/bt/libbt.a 9.5M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/build.ninja 8.7M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/compile_commands.json 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.0M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/esp-idf/driver/libdriver.a USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 https://mirrors.aliyun.com/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 https://mirrors.aliyun.com/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! missing: chroma-js@^2.4.2, required by iobroker.javascript@7.8.0 npm ERR! missing: dewpoint@^1.0.0, required by iobroker.javascript@7.8.0 npm ERR! missing: moment-duration-format@^2.3.2, required by iobroker.javascript@7.8.0 npm ERR! invalid: moment-timezone@0.5.44 /opt/iobroker/node_modules/moment-timezone npm ERR! invalid: webuntis@1.22.1 /opt/iobroker/node_modules/webuntis npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-03-08T05_28_52_939Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 30 Adapter State system.adapter.acme.0 : acme : iobrokernano - disabled, port: 80, bind: 192.168.37.200 + system.adapter.admin.0 : admin : iobrokernano - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa-shoppinglist.0 : alexa-shoppinglist : iobrokernano - enabled + system.adapter.alexa2.0 : alexa2 : iobrokernano - enabled system.adapter.alias-manager.0 : alias-manager : iobrokernano - enabled + system.adapter.backitup.0 : backitup : iobrokernano - enabled system.adapter.blueconnect.0 : blueconnect : iobrokernano - enabled + system.adapter.cloud.0 : cloud : iobrokernano - enabled system.adapter.daswetter.0 : daswetter : iobrokernano - enabled + system.adapter.deconz.0 : deconz : iobrokernano - enabled, port: 80 + system.adapter.device-watcher.0 : device-watcher : iobrokernano - enabled + system.adapter.discovery.0 : discovery : iobrokernano - enabled system.adapter.dwd.0 : dwd : iobrokernano - enabled + system.adapter.echarts.0 : echarts : iobrokernano - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: iobrokernano - enabled + system.adapter.esphome.0 : esphome : iobrokernano - enabled + system.adapter.fronius.0 : fronius : iobrokernano - enabled + system.adapter.fullcalendar.0 : fullcalendar : iobrokernano - enabled system.adapter.growatt.0 : growatt : iobrokernano - disabled + system.adapter.gruenbeck.0 : gruenbeck : iobrokernano - enabled + system.adapter.hm-rega.0 : hm-rega : iobrokernano - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobrokernano - enabled, port: 0 system.adapter.hp-ilo.0 : hp-ilo : iobrokernano - disabled system.adapter.ical.0 : ical : iobrokernano - enabled system.adapter.icons-material-svg.0 : icons-material-svg : iobrokernano - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobrokernano - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobrokernano - enabled + system.adapter.influxdb.0 : influxdb : iobrokernano - enabled, port: 8086 + system.adapter.info.0 : info : iobrokernano - enabled + system.adapter.iot.0 : iot : iobrokernano - enabled + system.adapter.javascript.0 : javascript : iobrokernano - enabled system.adapter.javascript.1 : javascript : iobrokernano - disabled system.adapter.javascript.2 : javascript : iobrokernano - disabled + system.adapter.klf200.0 : klf200 : iobrokernano - enabled system.adapter.lametric.0 : lametric : iobrokernano - disabled + system.adapter.linux-control.0 : linux-control : iobrokernano - enabled + system.adapter.melcloud.0 : melcloud : iobrokernano - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : iobrokernano - enabled system.adapter.modbus.0 : modbus : iobrokernano - disabled system.adapter.modbus.1 : modbus : iobrokernano - disabled + system.adapter.modbus.2 : modbus : iobrokernano - enabled + system.adapter.mqtt.0 : mqtt : iobrokernano - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.nanoleaf-lightpanels.1 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.net-tools.0 : net-tools : iobrokernano - enabled + system.adapter.nina.0 : nina : iobrokernano - enabled + system.adapter.nuki-extended.0 : nuki-extended : iobrokernano - enabled + system.adapter.nut.0 : nut : iobrokernano - enabled system.adapter.openweathermap.0 : openweathermap : iobrokernano - enabled + system.adapter.parcel.0 : parcel : iobrokernano - enabled + system.adapter.ping.0 : ping : iobrokernano - enabled system.adapter.proxmox.0 : proxmox : iobrokernano - disabled, port: 8006 + system.adapter.puppeteer.0 : puppeteer : iobrokernano - enabled + system.adapter.pvforecast.0 : pvforecast : iobrokernano - enabled + system.adapter.pvforecast.1 : pvforecast : iobrokernano - enabled + system.adapter.radar-trap.0 : radar-trap : iobrokernano - enabled system.adapter.roborock.0 : roborock : iobrokernano - disabled + system.adapter.scenes.0 : scenes : iobrokernano - enabled + system.adapter.senec.0 : senec : iobrokernano - enabled + system.adapter.shelly.0 : shelly : iobrokernano - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobrokernano - enabled, port: 18087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.smartthings.0 : smartthings : iobrokernano - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobrokernano - enabled system.adapter.systeminfo.0 : systeminfo : iobrokernano - disabled + system.adapter.telegram.0 : telegram : iobrokernano - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobrokernano - enabled + system.adapter.tibberlink.0 : tibberlink : iobrokernano - enabled + system.adapter.time-switch.0 : time-switch : iobrokernano - enabled + system.adapter.traccar.0 : traccar : iobrokernano - enabled + system.adapter.trashschedule.0 : trashschedule : iobrokernano - enabled system.adapter.unifi-protect.0 : unifi-protect : iobrokernano - disabled + system.adapter.unifi.0 : unifi : iobrokernano - enabled system.adapter.ve.0 : ve : iobrokernano - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobrokernano - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobrokernano - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobrokernano - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobrokernano - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobrokernano - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobrokernano - enabled system.adapter.vis-justgage.0 : vis-justgage : iobrokernano - enabled system.adapter.vis-map.0 : vis-map : iobrokernano - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : iobrokernano - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobrokernano - enabled system.adapter.vis-metro.0 : vis-metro : iobrokernano - enabled system.adapter.vis-plumb.0 : vis-plumb : iobrokernano - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobrokernano - enabled system.adapter.vis.0 : vis : iobrokernano - disabled + system.adapter.vw-connect.0 : vw-connect : iobrokernano - enabled system.adapter.weatherunderground.0 : weatherunderground : iobrokernano - enabled + system.adapter.web.0 : web : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobrokernano - enabled, port: 9082, bind: 192.168.37.200 (SSL), run as: admin system.adapter.web.2 : web : iobrokernano - disabled, port: 8085, bind: 192.168.37.200, run as: admin + system.adapter.webuntis.0 : webuntis : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.windows-control.0 : windows-control : iobrokernano - enabled + system.adapter.wled.0 : wled : iobrokernano - enabled + system.adapter.wolf-smartset.0 : wolf-smartset : iobrokernano - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobrokernano - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.0 : deconz : iobrokernano - enabled, port: 80 + system.adapter.hm-rpc.0 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobrokernano - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobrokernano - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.nanoleaf-lightpanels.1 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.shelly.0 : shelly : iobrokernano - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobrokernano - enabled, port: 18087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.telegram.0 : telegram : iobrokernano - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobrokernano - enabled, port: 9082, bind: 192.168.37.200 (SSL), run as: admin + system.adapter.webuntis.0 : webuntis : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "acme" : 0.1.2 , installed 0.1.2 Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa-shoppinglist": 0.1.5, installed 0.1.5 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "device-watcher": 2.9.6 , installed 2.10.1 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "fronius" : 2.0.2 , installed 2.0.2 Adapter "fullcalendar" : 2.3.4 , installed 2.3.4 Adapter "growatt" : 3.2.3 , installed 3.2.3 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.16.0 , installed 1.16.0 Adapter "hp-ilo" : 1.0.6 , installed 1.0.6 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "klf200" : 1.2.0 , installed 1.2.0 Adapter "lametric" : 3.1.3 , installed 3.1.3 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "melcloud" : 1.3.7 , installed 1.3.7 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "nanoleaf-lightpanels": 1.4.0, installed 1.4.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 2.2.3 , installed 2.2.3 Adapter "puppeteer" : 0.2.8 , installed 0.2.8 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "roborock" : 0.4.4 , installed 0.5.1 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "senec" : 1.6.11 , installed 1.6.11 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "smartthings" : 0.0.4 , installed 0.1.1 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "systeminfo" : 1.1.0 , installed 1.1.0 Adapter "telegram" : 3.1.0 , installed 3.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 2.2.2 , installed 2.2.2 Adapter "traccar" : 1.1.4 , installed 1.1.4 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "unifi" : 0.6.7 , installed 0.6.7 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-map" : 1.0.5 , installed 1.0.5 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.3 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "webuntis" : 0.3.4 , installed 0.3.4 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "wolf-smartset": 1.1.1 , installed 1.1.1 Adapter "ws" : 2.5.10 , installed 2.5.10 Objects and States Please stand by - This may take a while Objects: 79702 States: 67880 *** OS-Repositories and Updates *** Hit:1 https://repos.influxdata.com/debian stable InRelease Hit:2 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:3 https://mirrors.aliyun.com/debian bookworm InRelease Hit:4 https://mirrors.aliyun.com/debian-security bookworm-security InRelease Hit:5 https://mirrors.aliyun.com/debian bookworm-updates InRelease Hit:6 https://mirrors.aliyun.com/debian bookworm-backports InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 16875 1/systemd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 29872 829/sshd: /usr/sbin tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 69305001 1208933/io.mqtt.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 69305000 1208933/io.mqtt.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 69304891 1208839/io.shelly.0 tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 1001 69306465 1208753/io.hm-rpc.0 tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1001 69305716 1208805/io.hm-rpc.1 tcp 0 0 127.0.0.1:45583 0.0.0.0:* LISTEN 1001 69311964 1209576/chromium tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 1001 69301616 1208871/io.hm-rpc.2 tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 107 29877 818/redis-server 12 tcp 0 0 0.0.0.0:6052 0.0.0.0:* LISTEN 1001 163363541 3782953/python3 tcp 0 0 192.168.37.200:9082 0.0.0.0:* LISTEN 1001 69316011 1210605/io.web.1 tcp6 0 0 :::111 :::* LISTEN 0 16876 1/systemd tcp6 0 0 :::22 :::* LISTEN 0 29874 829/sshd: /usr/sbin tcp6 0 0 :::18087 :::* LISTEN 1001 69304720 1208689/io.simple-a tcp6 0 0 :::51989 :::* LISTEN 1001 69300781 1208789/io.nuki-ext tcp6 0 0 :::3040 :::* LISTEN 1001 69309701 1209337/io.radar-tr tcp6 0 0 :::8086 :::* LISTEN 999 256542 23498/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 69307549 1209219/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 69302482 1208575/io.admin.0 tcp6 0 0 ::1:6379 :::* LISTEN 107 29878 818/redis-server 12 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 28549 1/systemd udp 0 0 192.168.37.200:123 0.0.0.0:* 102 34992898 65661/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 0 684664 65661/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 0 684660 65661/ntpd udp 0 0 0.0.0.0:59240 0.0.0.0:* 109 17103 762/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69307433 1209166/io.nanoleaf udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69306157 1209081/io.nanoleaf udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69305524 1208617/io.deconz.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 163367411 3782871/io.esphome. udp 0 0 127.0.0.1:5353 0.0.0.0:* 1001 163363547 3782953/python3 udp 0 0 192.168.37.200:5353 0.0.0.0:* 1001 163363546 3782953/python3 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 163363542 3782953/python3 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 69304061 1209033/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 109 17101 762/avahi-daemon: r udp6 0 0 :::111 :::* 0 28550 1/systemd udp6 0 0 fd69:fddb:1bdd:5934:123 :::* 102 81568225 65661/ntpd udp6 0 0 fe80::a4f4:94ff:fec:123 :::* 102 34992903 65661/ntpd udp6 0 0 ::1:123 :::* 0 684668 65661/ntpd udp6 0 0 :::123 :::* 0 684657 65661/ntpd udp6 0 0 :::1900 :::* 1001 69305526 1208617/io.deconz.0 udp6 0 0 :::1900 :::* 1001 69305525 1208617/io.deconz.0 udp6 0 0 :::5353 :::* 109 17102 762/avahi-daemon: r udp6 0 0 :::38479 :::* 109 17104 762/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-03-08 06:23:00.760 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:23:00.761 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:23:01.893 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3780534 2024-03-08 06:24:00.036 - info: host.iobrokernano instance system.adapter.dwd.0 started with pid 3780718 2024-03-08 06:24:00.733 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:24:00.733 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:24:01.879 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3780738 2024-03-08 06:24:03.731 - info: host.iobrokernano instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-03-08 06:25:00.056 - info: host.iobrokernano instance system.adapter.blueconnect.0 started with pid 3781231 2024-03-08 06:25:00.676 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:25:00.676 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:25:01.784 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781262 2024-03-08 06:25:12.255 - info: host.iobrokernano instance system.adapter.blueconnect.0 terminated with code 0 (NO_ERROR) 2024-03-08 06:26:00.697 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:26:00.698 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:26:01.873 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781437 2024-03-08 06:27:00.766 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:27:00.767 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:27:01.890 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781946 2024-03-08 06:28:00.701 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:28:00.702 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:28:01.862 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3782136 2024-03-08 06:29:00.757 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:29:00.758 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:29:01.911 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3782871 -
So, hier noch die diag-Ausgabe. Seht ihr da Probleme?
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobrokernano Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.25 Architecture: arm64 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 06:28:44 up 25 days, 19:16, 2 users, load average: 2.46, 1.96, 1.89 CPU threads: 8 *** Time and Time Zones *** Local time: Fri 2024-03-08 06:28:44 CET Universal time: Fri 2024-03-08 05:28:44 UTC RTC time: Fri 2024-03-08 05:28:44 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** User and Groups *** pi /home/pi pi sudo iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 16G 7.1G 784M 3.3M 9.1G 9.6G Swap: 0B 0B 0B Total: 16G 7.1G 784M 15948 M total memory 6785 M used memory 5235 M active memory 9275 M inactive memory 747 M free memory 483 M buffer memory 8187 M swap cache 0 M total swap 0 M used swap 0 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * nvmf-autoconnect.service loaded failed failed Connect NVMe-oF subsystems automatically during boot LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.8G 0 7.8G 0% /dev tmpfs tmpfs 1.6G 2.4M 1.6G 1% /run overlay overlay 226G 15G 200G 7% / tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 5.0M 24K 5.0M 1% /run/lock /dev/nvme0n1p1 ext4 469G 11G 434G 3% /mnt/nvm tmpfs tmpfs 1.6G 8.0K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS /mnt/nvm /dev/nvme0n1p1 ext4 rw,noatime Files in neuralgic directories: /var: 971M /var/ 485M /var/lib 302M /var/lib/redis 270M /var/log 253M /var/log/journal/50d54139eb13431da5406ad3b6f26fbc Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 50.3M in the file system. /opt/iobroker/backups: 5.1G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 205M /opt/iobroker/iobroker-data/ 186M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors 186M /opt/iobroker/iobroker-data/esphome.0/.esphome/build 186M /opt/iobroker/iobroker-data/esphome.0/.esphome 186M /opt/iobroker/iobroker-data/esphome.0 The five largest files in iobroker-data are: 15M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/esp-idf/bt/libbt.a 9.5M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/build.ninja 8.7M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/compile_commands.json 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.0M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/esp-idf/driver/libdriver.a USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 https://mirrors.aliyun.com/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 https://mirrors.aliyun.com/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! missing: chroma-js@^2.4.2, required by iobroker.javascript@7.8.0 npm ERR! missing: dewpoint@^1.0.0, required by iobroker.javascript@7.8.0 npm ERR! missing: moment-duration-format@^2.3.2, required by iobroker.javascript@7.8.0 npm ERR! invalid: moment-timezone@0.5.44 /opt/iobroker/node_modules/moment-timezone npm ERR! invalid: webuntis@1.22.1 /opt/iobroker/node_modules/webuntis npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-03-08T05_28_52_939Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 30 Adapter State system.adapter.acme.0 : acme : iobrokernano - disabled, port: 80, bind: 192.168.37.200 + system.adapter.admin.0 : admin : iobrokernano - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa-shoppinglist.0 : alexa-shoppinglist : iobrokernano - enabled + system.adapter.alexa2.0 : alexa2 : iobrokernano - enabled system.adapter.alias-manager.0 : alias-manager : iobrokernano - enabled + system.adapter.backitup.0 : backitup : iobrokernano - enabled system.adapter.blueconnect.0 : blueconnect : iobrokernano - enabled + system.adapter.cloud.0 : cloud : iobrokernano - enabled system.adapter.daswetter.0 : daswetter : iobrokernano - enabled + system.adapter.deconz.0 : deconz : iobrokernano - enabled, port: 80 + system.adapter.device-watcher.0 : device-watcher : iobrokernano - enabled + system.adapter.discovery.0 : discovery : iobrokernano - enabled system.adapter.dwd.0 : dwd : iobrokernano - enabled + system.adapter.echarts.0 : echarts : iobrokernano - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: iobrokernano - enabled + system.adapter.esphome.0 : esphome : iobrokernano - enabled + system.adapter.fronius.0 : fronius : iobrokernano - enabled + system.adapter.fullcalendar.0 : fullcalendar : iobrokernano - enabled system.adapter.growatt.0 : growatt : iobrokernano - disabled + system.adapter.gruenbeck.0 : gruenbeck : iobrokernano - enabled + system.adapter.hm-rega.0 : hm-rega : iobrokernano - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobrokernano - enabled, port: 0 system.adapter.hp-ilo.0 : hp-ilo : iobrokernano - disabled system.adapter.ical.0 : ical : iobrokernano - enabled system.adapter.icons-material-svg.0 : icons-material-svg : iobrokernano - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobrokernano - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobrokernano - enabled + system.adapter.influxdb.0 : influxdb : iobrokernano - enabled, port: 8086 + system.adapter.info.0 : info : iobrokernano - enabled + system.adapter.iot.0 : iot : iobrokernano - enabled + system.adapter.javascript.0 : javascript : iobrokernano - enabled system.adapter.javascript.1 : javascript : iobrokernano - disabled system.adapter.javascript.2 : javascript : iobrokernano - disabled + system.adapter.klf200.0 : klf200 : iobrokernano - enabled system.adapter.lametric.0 : lametric : iobrokernano - disabled + system.adapter.linux-control.0 : linux-control : iobrokernano - enabled + system.adapter.melcloud.0 : melcloud : iobrokernano - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : iobrokernano - enabled system.adapter.modbus.0 : modbus : iobrokernano - disabled system.adapter.modbus.1 : modbus : iobrokernano - disabled + system.adapter.modbus.2 : modbus : iobrokernano - enabled + system.adapter.mqtt.0 : mqtt : iobrokernano - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.nanoleaf-lightpanels.1 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.net-tools.0 : net-tools : iobrokernano - enabled + system.adapter.nina.0 : nina : iobrokernano - enabled + system.adapter.nuki-extended.0 : nuki-extended : iobrokernano - enabled + system.adapter.nut.0 : nut : iobrokernano - enabled system.adapter.openweathermap.0 : openweathermap : iobrokernano - enabled + system.adapter.parcel.0 : parcel : iobrokernano - enabled + system.adapter.ping.0 : ping : iobrokernano - enabled system.adapter.proxmox.0 : proxmox : iobrokernano - disabled, port: 8006 + system.adapter.puppeteer.0 : puppeteer : iobrokernano - enabled + system.adapter.pvforecast.0 : pvforecast : iobrokernano - enabled + system.adapter.pvforecast.1 : pvforecast : iobrokernano - enabled + system.adapter.radar-trap.0 : radar-trap : iobrokernano - enabled system.adapter.roborock.0 : roborock : iobrokernano - disabled + system.adapter.scenes.0 : scenes : iobrokernano - enabled + system.adapter.senec.0 : senec : iobrokernano - enabled + system.adapter.shelly.0 : shelly : iobrokernano - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobrokernano - enabled, port: 18087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.smartthings.0 : smartthings : iobrokernano - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobrokernano - enabled system.adapter.systeminfo.0 : systeminfo : iobrokernano - disabled + system.adapter.telegram.0 : telegram : iobrokernano - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobrokernano - enabled + system.adapter.tibberlink.0 : tibberlink : iobrokernano - enabled + system.adapter.time-switch.0 : time-switch : iobrokernano - enabled + system.adapter.traccar.0 : traccar : iobrokernano - enabled + system.adapter.trashschedule.0 : trashschedule : iobrokernano - enabled system.adapter.unifi-protect.0 : unifi-protect : iobrokernano - disabled + system.adapter.unifi.0 : unifi : iobrokernano - enabled system.adapter.ve.0 : ve : iobrokernano - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobrokernano - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobrokernano - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobrokernano - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobrokernano - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobrokernano - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobrokernano - enabled system.adapter.vis-justgage.0 : vis-justgage : iobrokernano - enabled system.adapter.vis-map.0 : vis-map : iobrokernano - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : iobrokernano - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobrokernano - enabled system.adapter.vis-metro.0 : vis-metro : iobrokernano - enabled system.adapter.vis-plumb.0 : vis-plumb : iobrokernano - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobrokernano - enabled system.adapter.vis.0 : vis : iobrokernano - disabled + system.adapter.vw-connect.0 : vw-connect : iobrokernano - enabled system.adapter.weatherunderground.0 : weatherunderground : iobrokernano - enabled + system.adapter.web.0 : web : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobrokernano - enabled, port: 9082, bind: 192.168.37.200 (SSL), run as: admin system.adapter.web.2 : web : iobrokernano - disabled, port: 8085, bind: 192.168.37.200, run as: admin + system.adapter.webuntis.0 : webuntis : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.windows-control.0 : windows-control : iobrokernano - enabled + system.adapter.wled.0 : wled : iobrokernano - enabled + system.adapter.wolf-smartset.0 : wolf-smartset : iobrokernano - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobrokernano - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.0 : deconz : iobrokernano - enabled, port: 80 + system.adapter.hm-rpc.0 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobrokernano - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobrokernano - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.nanoleaf-lightpanels.1 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.shelly.0 : shelly : iobrokernano - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobrokernano - enabled, port: 18087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.telegram.0 : telegram : iobrokernano - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobrokernano - enabled, port: 9082, bind: 192.168.37.200 (SSL), run as: admin + system.adapter.webuntis.0 : webuntis : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "acme" : 0.1.2 , installed 0.1.2 Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa-shoppinglist": 0.1.5, installed 0.1.5 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "device-watcher": 2.9.6 , installed 2.10.1 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "fronius" : 2.0.2 , installed 2.0.2 Adapter "fullcalendar" : 2.3.4 , installed 2.3.4 Adapter "growatt" : 3.2.3 , installed 3.2.3 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.16.0 , installed 1.16.0 Adapter "hp-ilo" : 1.0.6 , installed 1.0.6 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "klf200" : 1.2.0 , installed 1.2.0 Adapter "lametric" : 3.1.3 , installed 3.1.3 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "melcloud" : 1.3.7 , installed 1.3.7 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "nanoleaf-lightpanels": 1.4.0, installed 1.4.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 2.2.3 , installed 2.2.3 Adapter "puppeteer" : 0.2.8 , installed 0.2.8 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "roborock" : 0.4.4 , installed 0.5.1 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "senec" : 1.6.11 , installed 1.6.11 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "smartthings" : 0.0.4 , installed 0.1.1 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "systeminfo" : 1.1.0 , installed 1.1.0 Adapter "telegram" : 3.1.0 , installed 3.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 2.2.2 , installed 2.2.2 Adapter "traccar" : 1.1.4 , installed 1.1.4 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "unifi" : 0.6.7 , installed 0.6.7 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-map" : 1.0.5 , installed 1.0.5 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.3 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "webuntis" : 0.3.4 , installed 0.3.4 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "wolf-smartset": 1.1.1 , installed 1.1.1 Adapter "ws" : 2.5.10 , installed 2.5.10 Objects and States Please stand by - This may take a while Objects: 79702 States: 67880 *** OS-Repositories and Updates *** Hit:1 https://repos.influxdata.com/debian stable InRelease Hit:2 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:3 https://mirrors.aliyun.com/debian bookworm InRelease Hit:4 https://mirrors.aliyun.com/debian-security bookworm-security InRelease Hit:5 https://mirrors.aliyun.com/debian bookworm-updates InRelease Hit:6 https://mirrors.aliyun.com/debian bookworm-backports InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 16875 1/systemd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 29872 829/sshd: /usr/sbin tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 69305001 1208933/io.mqtt.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 69305000 1208933/io.mqtt.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 69304891 1208839/io.shelly.0 tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 1001 69306465 1208753/io.hm-rpc.0 tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1001 69305716 1208805/io.hm-rpc.1 tcp 0 0 127.0.0.1:45583 0.0.0.0:* LISTEN 1001 69311964 1209576/chromium tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 1001 69301616 1208871/io.hm-rpc.2 tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 107 29877 818/redis-server 12 tcp 0 0 0.0.0.0:6052 0.0.0.0:* LISTEN 1001 163363541 3782953/python3 tcp 0 0 192.168.37.200:9082 0.0.0.0:* LISTEN 1001 69316011 1210605/io.web.1 tcp6 0 0 :::111 :::* LISTEN 0 16876 1/systemd tcp6 0 0 :::22 :::* LISTEN 0 29874 829/sshd: /usr/sbin tcp6 0 0 :::18087 :::* LISTEN 1001 69304720 1208689/io.simple-a tcp6 0 0 :::51989 :::* LISTEN 1001 69300781 1208789/io.nuki-ext tcp6 0 0 :::3040 :::* LISTEN 1001 69309701 1209337/io.radar-tr tcp6 0 0 :::8086 :::* LISTEN 999 256542 23498/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 69307549 1209219/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 69302482 1208575/io.admin.0 tcp6 0 0 ::1:6379 :::* LISTEN 107 29878 818/redis-server 12 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 28549 1/systemd udp 0 0 192.168.37.200:123 0.0.0.0:* 102 34992898 65661/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 0 684664 65661/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 0 684660 65661/ntpd udp 0 0 0.0.0.0:59240 0.0.0.0:* 109 17103 762/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69307433 1209166/io.nanoleaf udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69306157 1209081/io.nanoleaf udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69305524 1208617/io.deconz.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 163367411 3782871/io.esphome. udp 0 0 127.0.0.1:5353 0.0.0.0:* 1001 163363547 3782953/python3 udp 0 0 192.168.37.200:5353 0.0.0.0:* 1001 163363546 3782953/python3 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 163363542 3782953/python3 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 69304061 1209033/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 109 17101 762/avahi-daemon: r udp6 0 0 :::111 :::* 0 28550 1/systemd udp6 0 0 fd69:fddb:1bdd:5934:123 :::* 102 81568225 65661/ntpd udp6 0 0 fe80::a4f4:94ff:fec:123 :::* 102 34992903 65661/ntpd udp6 0 0 ::1:123 :::* 0 684668 65661/ntpd udp6 0 0 :::123 :::* 0 684657 65661/ntpd udp6 0 0 :::1900 :::* 1001 69305526 1208617/io.deconz.0 udp6 0 0 :::1900 :::* 1001 69305525 1208617/io.deconz.0 udp6 0 0 :::5353 :::* 109 17102 762/avahi-daemon: r udp6 0 0 :::38479 :::* 109 17104 762/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-03-08 06:23:00.760 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:23:00.761 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:23:01.893 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3780534 2024-03-08 06:24:00.036 - info: host.iobrokernano instance system.adapter.dwd.0 started with pid 3780718 2024-03-08 06:24:00.733 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:24:00.733 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:24:01.879 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3780738 2024-03-08 06:24:03.731 - info: host.iobrokernano instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-03-08 06:25:00.056 - info: host.iobrokernano instance system.adapter.blueconnect.0 started with pid 3781231 2024-03-08 06:25:00.676 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:25:00.676 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:25:01.784 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781262 2024-03-08 06:25:12.255 - info: host.iobrokernano instance system.adapter.blueconnect.0 terminated with code 0 (NO_ERROR) 2024-03-08 06:26:00.697 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:26:00.698 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:26:01.873 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781437 2024-03-08 06:27:00.766 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:27:00.767 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:27:01.890 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781946 2024-03-08 06:28:00.701 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:28:00.702 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:28:01.862 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3782136 2024-03-08 06:29:00.757 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:29:00.758 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:29:01.911 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3782871Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! missing: chroma-js@^2.4.2, required by iobroker.javascript@7.8.0 npm ERR! missing: dewpoint@^1.0.0, required by iobroker.javascript@7.8.0 npm ERR! missing: moment-duration-format@^2.3.2, required by iobroker.javascript@7.8.0 npm ERR! invalid: moment-timezone@0.5.44 /opt/iobroker/node_modules/moment-timezone npm ERR! invalid: webuntis@1.22.1 /opt/iobroker/node_modules/webuntis npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-03-08T05_28_52_939Z-debug-0.logIntel(R) Celeron(R) CPU N3000 @ 1.04GHz 8G RAM 480G SSD
Virtualization : unprivileged lxc container (debian 12 on Proxmox 8.4.14)
Linux pve 6.8.12-16-pve
6 GByte RAM für den Container
Fritzbox 6591 FW 8.03 (Vodafone Leih-Box)
Remote-Access über Wireguard der Fritzbox -
Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! missing: chroma-js@^2.4.2, required by iobroker.javascript@7.8.0 npm ERR! missing: dewpoint@^1.0.0, required by iobroker.javascript@7.8.0 npm ERR! missing: moment-duration-format@^2.3.2, required by iobroker.javascript@7.8.0 npm ERR! invalid: moment-timezone@0.5.44 /opt/iobroker/node_modules/moment-timezone npm ERR! invalid: webuntis@1.22.1 /opt/iobroker/node_modules/webuntis npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-03-08T05_28_52_939Z-debug-0.log@oxident
Da stellt sich die Frage: Wie sind z.B.chroma-jsoderdewpointauf das System gekommen?
"von Hand" oder über den JS-Adapter? -
@MartinP @Codierknecht Stimmt, ist mir auch gerade aufgefallen. Die NPM waren ganz regulär als Module im JS-Adapter eingetragen. Habe sie jetzt dort entfernt und neu eingetragen. Danach gab's keine Meldungen mehr beim diag.
Ich sehe das doch richtig, dass der JS-Adapter beim Start sämtliche States, also auch die, auf die ich keine Trigger habe, abonniert, oder?
Dann wäre es ja noch komischer, wenn einzelne Trigger spontan nicht mehr "feuern"... -
So, hier noch die diag-Ausgabe. Seht ihr da Probleme?
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobrokernano Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.25 Architecture: arm64 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 06:28:44 up 25 days, 19:16, 2 users, load average: 2.46, 1.96, 1.89 CPU threads: 8 *** Time and Time Zones *** Local time: Fri 2024-03-08 06:28:44 CET Universal time: Fri 2024-03-08 05:28:44 UTC RTC time: Fri 2024-03-08 05:28:44 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** User and Groups *** pi /home/pi pi sudo iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 16G 7.1G 784M 3.3M 9.1G 9.6G Swap: 0B 0B 0B Total: 16G 7.1G 784M 15948 M total memory 6785 M used memory 5235 M active memory 9275 M inactive memory 747 M free memory 483 M buffer memory 8187 M swap cache 0 M total swap 0 M used swap 0 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * nvmf-autoconnect.service loaded failed failed Connect NVMe-oF subsystems automatically during boot LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.8G 0 7.8G 0% /dev tmpfs tmpfs 1.6G 2.4M 1.6G 1% /run overlay overlay 226G 15G 200G 7% / tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 5.0M 24K 5.0M 1% /run/lock /dev/nvme0n1p1 ext4 469G 11G 434G 3% /mnt/nvm tmpfs tmpfs 1.6G 8.0K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS /mnt/nvm /dev/nvme0n1p1 ext4 rw,noatime Files in neuralgic directories: /var: 971M /var/ 485M /var/lib 302M /var/lib/redis 270M /var/log 253M /var/log/journal/50d54139eb13431da5406ad3b6f26fbc Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 50.3M in the file system. /opt/iobroker/backups: 5.1G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 205M /opt/iobroker/iobroker-data/ 186M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors 186M /opt/iobroker/iobroker-data/esphome.0/.esphome/build 186M /opt/iobroker/iobroker-data/esphome.0/.esphome 186M /opt/iobroker/iobroker-data/esphome.0 The five largest files in iobroker-data are: 15M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/esp-idf/bt/libbt.a 9.5M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/build.ninja 8.7M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/compile_commands.json 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.0M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/esp-idf/driver/libdriver.a USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 https://mirrors.aliyun.com/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 https://mirrors.aliyun.com/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! missing: chroma-js@^2.4.2, required by iobroker.javascript@7.8.0 npm ERR! missing: dewpoint@^1.0.0, required by iobroker.javascript@7.8.0 npm ERR! missing: moment-duration-format@^2.3.2, required by iobroker.javascript@7.8.0 npm ERR! invalid: moment-timezone@0.5.44 /opt/iobroker/node_modules/moment-timezone npm ERR! invalid: webuntis@1.22.1 /opt/iobroker/node_modules/webuntis npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-03-08T05_28_52_939Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 30 Adapter State system.adapter.acme.0 : acme : iobrokernano - disabled, port: 80, bind: 192.168.37.200 + system.adapter.admin.0 : admin : iobrokernano - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa-shoppinglist.0 : alexa-shoppinglist : iobrokernano - enabled + system.adapter.alexa2.0 : alexa2 : iobrokernano - enabled system.adapter.alias-manager.0 : alias-manager : iobrokernano - enabled + system.adapter.backitup.0 : backitup : iobrokernano - enabled system.adapter.blueconnect.0 : blueconnect : iobrokernano - enabled + system.adapter.cloud.0 : cloud : iobrokernano - enabled system.adapter.daswetter.0 : daswetter : iobrokernano - enabled + system.adapter.deconz.0 : deconz : iobrokernano - enabled, port: 80 + system.adapter.device-watcher.0 : device-watcher : iobrokernano - enabled + system.adapter.discovery.0 : discovery : iobrokernano - enabled system.adapter.dwd.0 : dwd : iobrokernano - enabled + system.adapter.echarts.0 : echarts : iobrokernano - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: iobrokernano - enabled + system.adapter.esphome.0 : esphome : iobrokernano - enabled + system.adapter.fronius.0 : fronius : iobrokernano - enabled + system.adapter.fullcalendar.0 : fullcalendar : iobrokernano - enabled system.adapter.growatt.0 : growatt : iobrokernano - disabled + system.adapter.gruenbeck.0 : gruenbeck : iobrokernano - enabled + system.adapter.hm-rega.0 : hm-rega : iobrokernano - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobrokernano - enabled, port: 0 system.adapter.hp-ilo.0 : hp-ilo : iobrokernano - disabled system.adapter.ical.0 : ical : iobrokernano - enabled system.adapter.icons-material-svg.0 : icons-material-svg : iobrokernano - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobrokernano - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobrokernano - enabled + system.adapter.influxdb.0 : influxdb : iobrokernano - enabled, port: 8086 + system.adapter.info.0 : info : iobrokernano - enabled + system.adapter.iot.0 : iot : iobrokernano - enabled + system.adapter.javascript.0 : javascript : iobrokernano - enabled system.adapter.javascript.1 : javascript : iobrokernano - disabled system.adapter.javascript.2 : javascript : iobrokernano - disabled + system.adapter.klf200.0 : klf200 : iobrokernano - enabled system.adapter.lametric.0 : lametric : iobrokernano - disabled + system.adapter.linux-control.0 : linux-control : iobrokernano - enabled + system.adapter.melcloud.0 : melcloud : iobrokernano - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : iobrokernano - enabled system.adapter.modbus.0 : modbus : iobrokernano - disabled system.adapter.modbus.1 : modbus : iobrokernano - disabled + system.adapter.modbus.2 : modbus : iobrokernano - enabled + system.adapter.mqtt.0 : mqtt : iobrokernano - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.nanoleaf-lightpanels.1 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.net-tools.0 : net-tools : iobrokernano - enabled + system.adapter.nina.0 : nina : iobrokernano - enabled + system.adapter.nuki-extended.0 : nuki-extended : iobrokernano - enabled + system.adapter.nut.0 : nut : iobrokernano - enabled system.adapter.openweathermap.0 : openweathermap : iobrokernano - enabled + system.adapter.parcel.0 : parcel : iobrokernano - enabled + system.adapter.ping.0 : ping : iobrokernano - enabled system.adapter.proxmox.0 : proxmox : iobrokernano - disabled, port: 8006 + system.adapter.puppeteer.0 : puppeteer : iobrokernano - enabled + system.adapter.pvforecast.0 : pvforecast : iobrokernano - enabled + system.adapter.pvforecast.1 : pvforecast : iobrokernano - enabled + system.adapter.radar-trap.0 : radar-trap : iobrokernano - enabled system.adapter.roborock.0 : roborock : iobrokernano - disabled + system.adapter.scenes.0 : scenes : iobrokernano - enabled + system.adapter.senec.0 : senec : iobrokernano - enabled + system.adapter.shelly.0 : shelly : iobrokernano - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobrokernano - enabled, port: 18087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.smartthings.0 : smartthings : iobrokernano - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobrokernano - enabled system.adapter.systeminfo.0 : systeminfo : iobrokernano - disabled + system.adapter.telegram.0 : telegram : iobrokernano - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobrokernano - enabled + system.adapter.tibberlink.0 : tibberlink : iobrokernano - enabled + system.adapter.time-switch.0 : time-switch : iobrokernano - enabled + system.adapter.traccar.0 : traccar : iobrokernano - enabled + system.adapter.trashschedule.0 : trashschedule : iobrokernano - enabled system.adapter.unifi-protect.0 : unifi-protect : iobrokernano - disabled + system.adapter.unifi.0 : unifi : iobrokernano - enabled system.adapter.ve.0 : ve : iobrokernano - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobrokernano - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobrokernano - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobrokernano - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobrokernano - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobrokernano - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobrokernano - enabled system.adapter.vis-justgage.0 : vis-justgage : iobrokernano - enabled system.adapter.vis-map.0 : vis-map : iobrokernano - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : iobrokernano - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobrokernano - enabled system.adapter.vis-metro.0 : vis-metro : iobrokernano - enabled system.adapter.vis-plumb.0 : vis-plumb : iobrokernano - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobrokernano - enabled system.adapter.vis.0 : vis : iobrokernano - disabled + system.adapter.vw-connect.0 : vw-connect : iobrokernano - enabled system.adapter.weatherunderground.0 : weatherunderground : iobrokernano - enabled + system.adapter.web.0 : web : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobrokernano - enabled, port: 9082, bind: 192.168.37.200 (SSL), run as: admin system.adapter.web.2 : web : iobrokernano - disabled, port: 8085, bind: 192.168.37.200, run as: admin + system.adapter.webuntis.0 : webuntis : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.windows-control.0 : windows-control : iobrokernano - enabled + system.adapter.wled.0 : wled : iobrokernano - enabled + system.adapter.wolf-smartset.0 : wolf-smartset : iobrokernano - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobrokernano - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.0 : deconz : iobrokernano - enabled, port: 80 + system.adapter.hm-rpc.0 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobrokernano - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobrokernano - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.nanoleaf-lightpanels.1 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.shelly.0 : shelly : iobrokernano - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobrokernano - enabled, port: 18087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.telegram.0 : telegram : iobrokernano - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobrokernano - enabled, port: 9082, bind: 192.168.37.200 (SSL), run as: admin + system.adapter.webuntis.0 : webuntis : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "acme" : 0.1.2 , installed 0.1.2 Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa-shoppinglist": 0.1.5, installed 0.1.5 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "device-watcher": 2.9.6 , installed 2.10.1 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "fronius" : 2.0.2 , installed 2.0.2 Adapter "fullcalendar" : 2.3.4 , installed 2.3.4 Adapter "growatt" : 3.2.3 , installed 3.2.3 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.16.0 , installed 1.16.0 Adapter "hp-ilo" : 1.0.6 , installed 1.0.6 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "klf200" : 1.2.0 , installed 1.2.0 Adapter "lametric" : 3.1.3 , installed 3.1.3 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "melcloud" : 1.3.7 , installed 1.3.7 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "nanoleaf-lightpanels": 1.4.0, installed 1.4.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 2.2.3 , installed 2.2.3 Adapter "puppeteer" : 0.2.8 , installed 0.2.8 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "roborock" : 0.4.4 , installed 0.5.1 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "senec" : 1.6.11 , installed 1.6.11 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "smartthings" : 0.0.4 , installed 0.1.1 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "systeminfo" : 1.1.0 , installed 1.1.0 Adapter "telegram" : 3.1.0 , installed 3.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 2.2.2 , installed 2.2.2 Adapter "traccar" : 1.1.4 , installed 1.1.4 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "unifi" : 0.6.7 , installed 0.6.7 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-map" : 1.0.5 , installed 1.0.5 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.3 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "webuntis" : 0.3.4 , installed 0.3.4 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "wolf-smartset": 1.1.1 , installed 1.1.1 Adapter "ws" : 2.5.10 , installed 2.5.10 Objects and States Please stand by - This may take a while Objects: 79702 States: 67880 *** OS-Repositories and Updates *** Hit:1 https://repos.influxdata.com/debian stable InRelease Hit:2 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:3 https://mirrors.aliyun.com/debian bookworm InRelease Hit:4 https://mirrors.aliyun.com/debian-security bookworm-security InRelease Hit:5 https://mirrors.aliyun.com/debian bookworm-updates InRelease Hit:6 https://mirrors.aliyun.com/debian bookworm-backports InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 16875 1/systemd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 29872 829/sshd: /usr/sbin tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 69305001 1208933/io.mqtt.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 69305000 1208933/io.mqtt.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 69304891 1208839/io.shelly.0 tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 1001 69306465 1208753/io.hm-rpc.0 tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1001 69305716 1208805/io.hm-rpc.1 tcp 0 0 127.0.0.1:45583 0.0.0.0:* LISTEN 1001 69311964 1209576/chromium tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 1001 69301616 1208871/io.hm-rpc.2 tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 107 29877 818/redis-server 12 tcp 0 0 0.0.0.0:6052 0.0.0.0:* LISTEN 1001 163363541 3782953/python3 tcp 0 0 192.168.37.200:9082 0.0.0.0:* LISTEN 1001 69316011 1210605/io.web.1 tcp6 0 0 :::111 :::* LISTEN 0 16876 1/systemd tcp6 0 0 :::22 :::* LISTEN 0 29874 829/sshd: /usr/sbin tcp6 0 0 :::18087 :::* LISTEN 1001 69304720 1208689/io.simple-a tcp6 0 0 :::51989 :::* LISTEN 1001 69300781 1208789/io.nuki-ext tcp6 0 0 :::3040 :::* LISTEN 1001 69309701 1209337/io.radar-tr tcp6 0 0 :::8086 :::* LISTEN 999 256542 23498/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 69307549 1209219/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 69302482 1208575/io.admin.0 tcp6 0 0 ::1:6379 :::* LISTEN 107 29878 818/redis-server 12 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 28549 1/systemd udp 0 0 192.168.37.200:123 0.0.0.0:* 102 34992898 65661/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 0 684664 65661/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 0 684660 65661/ntpd udp 0 0 0.0.0.0:59240 0.0.0.0:* 109 17103 762/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69307433 1209166/io.nanoleaf udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69306157 1209081/io.nanoleaf udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 69305524 1208617/io.deconz.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 163367411 3782871/io.esphome. udp 0 0 127.0.0.1:5353 0.0.0.0:* 1001 163363547 3782953/python3 udp 0 0 192.168.37.200:5353 0.0.0.0:* 1001 163363546 3782953/python3 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 163363542 3782953/python3 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 69304061 1209033/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 109 17101 762/avahi-daemon: r udp6 0 0 :::111 :::* 0 28550 1/systemd udp6 0 0 fd69:fddb:1bdd:5934:123 :::* 102 81568225 65661/ntpd udp6 0 0 fe80::a4f4:94ff:fec:123 :::* 102 34992903 65661/ntpd udp6 0 0 ::1:123 :::* 0 684668 65661/ntpd udp6 0 0 :::123 :::* 0 684657 65661/ntpd udp6 0 0 :::1900 :::* 1001 69305526 1208617/io.deconz.0 udp6 0 0 :::1900 :::* 1001 69305525 1208617/io.deconz.0 udp6 0 0 :::5353 :::* 109 17102 762/avahi-daemon: r udp6 0 0 :::38479 :::* 109 17104 762/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-03-08 06:23:00.760 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:23:00.761 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:23:01.893 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3780534 2024-03-08 06:24:00.036 - info: host.iobrokernano instance system.adapter.dwd.0 started with pid 3780718 2024-03-08 06:24:00.733 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:24:00.733 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:24:01.879 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3780738 2024-03-08 06:24:03.731 - info: host.iobrokernano instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-03-08 06:25:00.056 - info: host.iobrokernano instance system.adapter.blueconnect.0 started with pid 3781231 2024-03-08 06:25:00.676 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:25:00.676 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:25:01.784 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781262 2024-03-08 06:25:12.255 - info: host.iobrokernano instance system.adapter.blueconnect.0 terminated with code 0 (NO_ERROR) 2024-03-08 06:26:00.697 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:26:00.698 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:26:01.873 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781437 2024-03-08 06:27:00.766 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:27:00.767 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:27:01.890 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3781946 2024-03-08 06:28:00.701 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:28:00.702 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:28:01.862 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3782136 2024-03-08 06:29:00.757 - info: host.iobrokernano instance system.adapter.esphome.0 scheduled normal terminated and will be restarted on schedule. 2024-03-08 06:29:00.758 - info: host.iobrokernano Restart adapter system.adapter.esphome.0 because enabled 2024-03-08 06:29:01.911 - info: host.iobrokernano instance system.adapter.esphome.0 started with pid 3782871@oxident sagte in Trigger nach einiger Zeit inaktiv:
Seht ihr da Probleme?
Setz den pi noch in die Gruppe adm rein.
sudo usermod -a -G adm pisudo systemctl set-default multi-user.targetSchalt einen kleinen SWAP ein. Hab den Befehl aber gerade nicht im Kopf.
Schau dir an was mit dem Service
nvmf-autoconnectlos ist.30 Adapter aus dem GitHub????
Die 'Katze'/GitHub ist NICHT deine reguläre Installationsquelle! Setz das soweit wie möglich auf Versionen aus einem Repo.Schalt die bookworm-backports aus.
Warum startet der esphome.0 im Minutentakt neu?
-
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Seht ihr da Probleme?
Setz den pi noch in die Gruppe adm rein.
sudo usermod -a -G adm pisudo systemctl set-default multi-user.targetSchalt einen kleinen SWAP ein. Hab den Befehl aber gerade nicht im Kopf.
Schau dir an was mit dem Service
nvmf-autoconnectlos ist.30 Adapter aus dem GitHub????
Die 'Katze'/GitHub ist NICHT deine reguläre Installationsquelle! Setz das soweit wie möglich auf Versionen aus einem Repo.Schalt die bookworm-backports aus.
Warum startet der esphome.0 im Minutentakt neu?
@thomas-braun Danke für Deine wertvollen Hinweise. Setze ich gleich um.
Ich nitze einige Adapter die es im stable nicht gibt und z.B. beim Influx-Adapter verursacht die aktuelle stable bei mir massive CPU-Last. Vermutlich wegen eines Bugs, der bei Abfragen immer alle Datensätze (anstelle eines bestimmten Zeitraums) durchläuft.
Ansonsten versuche ich wirklich, bei allen Adaptern im stable zu bleiben.
Beim ESPHome liegt es meiner Meinung nach an einer schlechten Verbindung zum Endgerät (ESP32 im Außenbereich).
-
@thomas-braun Danke für Deine wertvollen Hinweise. Setze ich gleich um.
Ich nitze einige Adapter die es im stable nicht gibt und z.B. beim Influx-Adapter verursacht die aktuelle stable bei mir massive CPU-Last. Vermutlich wegen eines Bugs, der bei Abfragen immer alle Datensätze (anstelle eines bestimmten Zeitraums) durchläuft.
Ansonsten versuche ich wirklich, bei allen Adaptern im stable zu bleiben.
Beim ESPHome liegt es meiner Meinung nach an einer schlechten Verbindung zum Endgerät (ESP32 im Außenbereich).
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Ansonsten versuche ich wirklich, bei allen Adaptern im stable zu bleiben.
30 Adapter aus dem GitHub...
-
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Ansonsten versuche ich wirklich, bei allen Adaptern im stable zu bleiben.
30 Adapter aus dem GitHub...
@thomas-braun said in Trigger nach einiger Zeit inaktiv:
30 Adapter aus dem GitHub...
Ja, das ist das einzig verbleibende Problem.Die restlichen Punkte habe ich jetzt alle umgesetzt:
- Swapfile mit 4GB angelegt
- pi zur Gruppe hinzugefügt und multi-user.target gesetzt
- nvmf-autoconnect war bei mir unnötig und eh "broken" (der Kernel der Distro unterstützt das gar nicht) -> jetzt disabled
- bookworm-backports ausgeschaltet
- esphome.0 war in der Tat ein Fehler von mir (zu blöd für Cron) ... danke @thomas-braun für den Hinweis!
-
@thomas-braun said in Trigger nach einiger Zeit inaktiv:
30 Adapter aus dem GitHub...
Ja, das ist das einzig verbleibende Problem.Die restlichen Punkte habe ich jetzt alle umgesetzt:
- Swapfile mit 4GB angelegt
- pi zur Gruppe hinzugefügt und multi-user.target gesetzt
- nvmf-autoconnect war bei mir unnötig und eh "broken" (der Kernel der Distro unterstützt das gar nicht) -> jetzt disabled
- bookworm-backports ausgeschaltet
- esphome.0 war in der Tat ein Fehler von mir (zu blöd für Cron) ... danke @thomas-braun für den Hinweis!
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Swapfile mit 4GB angelegt
Warum sooo riesig?
@thomas-braun sagte in Trigger nach einiger Zeit inaktiv:
Schalt einen kleinen SWAP ein.
@thomas-braun sagte in Trigger nach einiger Zeit inaktiv:
30 Adapter aus dem GitHub...
gibt's die alle noch nicht im Repo?
wenn doch, über das Repo drüberinstallieren -
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Swapfile mit 4GB angelegt
Warum sooo riesig?
@thomas-braun sagte in Trigger nach einiger Zeit inaktiv:
Schalt einen kleinen SWAP ein.
@thomas-braun sagte in Trigger nach einiger Zeit inaktiv:
30 Adapter aus dem GitHub...
gibt's die alle noch nicht im Repo?
wenn doch, über das Repo drüberinstallieren@homoran said in Trigger nach einiger Zeit inaktiv:
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Swapfile mit 4GB angelegt
Warum sooo riesig?
@thomas-braun sagte in Trigger nach einiger Zeit inaktiv:Schalt einen kleinen SWAP ein.
Ehrlich gesagt, Bauchgefühl. Mein RK3588 hat eine 1TB NVMe und davon nutze ich, trotz InfluxDB so gut wie nichts.
@thomas-braun sagte in Trigger nach einiger Zeit inaktiv:
30 Adapter aus dem GitHub...
gibt's die alle noch nicht im Repo?
wenn doch, über das Repo drüberinstallierenIn der Tat gibt's einige davon mittlerweile im Stable-Repo und die installiere ich gerade drüber. Jedoch bleiben einige über (z. B. Energiefluss-Erweitert oder MDW) die entweder nicht im Stable sind oder aber ein paar fiese Bugs (zumindest für mich, siehe Influx oder auch Senec) haben.
-
@homoran said in Trigger nach einiger Zeit inaktiv:
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Swapfile mit 4GB angelegt
Warum sooo riesig?
@thomas-braun sagte in Trigger nach einiger Zeit inaktiv:Schalt einen kleinen SWAP ein.
Ehrlich gesagt, Bauchgefühl. Mein RK3588 hat eine 1TB NVMe und davon nutze ich, trotz InfluxDB so gut wie nichts.
@thomas-braun sagte in Trigger nach einiger Zeit inaktiv:
30 Adapter aus dem GitHub...
gibt's die alle noch nicht im Repo?
wenn doch, über das Repo drüberinstallierenIn der Tat gibt's einige davon mittlerweile im Stable-Repo und die installiere ich gerade drüber. Jedoch bleiben einige über (z. B. Energiefluss-Erweitert oder MDW) die entweder nicht im Stable sind oder aber ein paar fiese Bugs (zumindest für mich, siehe Influx oder auch Senec) haben.
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Mein RK3588 hat eine 1TB NVMe
Die Größe des SWAP ist ja nicht von Deiner Platte abhängig, sondern vom RAM.
Bei mehr als 8 GB sind 512 MB empfohlen. -
@oxident sagte in Trigger nach einiger Zeit inaktiv:
Mein RK3588 hat eine 1TB NVMe
Die Größe des SWAP ist ja nicht von Deiner Platte abhängig, sondern vom RAM.
Bei mehr als 8 GB sind 512 MB empfohlen.@codierknecht said in Trigger nach einiger Zeit inaktiv:
Bei mehr als 8 GB sind 512 MB empfohlen.
Huch, das wusste ich nicht und hab's auch ehrlich gesagt nicht vorher recherchiert. Dachte immer, "besser haben als brauchen" ;-)
Werde ich gleich mal anpassen, obwohl er jetzt nach ein paar Stunden Betrieb sich noch nichts vom Swap genehmigt hat. Sind auch noch ~10GB vom RAM.
-
Okay, bin jetzt runter auf 12 Github-Adapter und der Swap wurde angepasst.
Bleibt nur noch eine Kuriosität: Aus irgendeinem Grund tauchen die oben erwähnten fehlenden NPMs bei jedem Neustart von IoBroker bestehen. Nur ein gezielter Neustart der JS-Instanz scheint diese dann erneut zu installieren ("npm install chroma-js" wird dann z. B. ausgeführt).
Kann es dafür einen logischen Grund geben?
Ansonsten sieht's jetzt, dank Eurer Hilfe, so aus:
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobrokernano Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.25 Architecture: arm64 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 14:16:27 up 29 min, 2 users, load average: 2.18, 2.23, 2.08 CPU threads: 8 *** Time and Time Zones *** Local time: Fri 2024-03-08 14:16:27 CET Universal time: Fri 2024-03-08 13:16:27 UTC RTC time: Fri 2024-03-08 13:16:27 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm sudo iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 16G 5.5G 9.8G 2.8M 1.7G 11G Swap: 4.3G 0B 4.3G Total: 21G 5.5G 14G 15948 M total memory 5221 M used memory 411 M active memory 5736 M inactive memory 9338 M free memory 162 M buffer memory 1479 M swap cache 4095 M total swap 0 M used swap 4095 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.8G 0 7.8G 0% /dev tmpfs tmpfs 1.6G 2.0M 1.6G 1% /run overlay overlay 226G 15G 200G 7% / tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 5.0M 24K 5.0M 1% /run/lock /dev/nvme0n1p1 ext4 469G 12G 434G 3% /mnt/nvm tmpfs tmpfs 1.6G 8.0K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Mar 8 13:46:36 2024] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtbo_idx=0 androidboot.verifiedbootstate=orange earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 coherent_pool=1m irqchip.gicv3_pseudo_nmi=0 rw root=/dev/mmcblk2p8 rootfstype=ext4 rootflags=discard data=/dev/mmcblk2p9 consoleblank=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [Fri Mar 8 13:46:38 2024] EXT4-fs (mmcblk2p8): mounted filesystem with ordered data mode. Quota mode: none. [Fri Mar 8 13:46:38 2024] EXT4-fs (mmcblk2p9): mounted filesystem with ordered data mode. Quota mode: none. [Fri Mar 8 13:46:38 2024] EXT4-fs (mmcblk2p9): re-mounted. Quota mode: none. [Fri Mar 8 13:46:40 2024] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS /mnt/nvm /dev/nvme0n1p1 ext4 rw,noatime Files in neuralgic directories: /var: 967M /var/ 481M /var/lib 302M /var/lib/redis 271M /var/log 253M /var/log/journal/50d54139eb13431da5406ad3b6f26fbc Archived and active journals take up 252.9M in the file system. /opt/iobroker/backups: 5.1G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 259M /opt/iobroker/iobroker-data/ 240M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors 240M /opt/iobroker/iobroker-data/esphome.0/.esphome/build 240M /opt/iobroker/iobroker-data/esphome.0/.esphome 240M /opt/iobroker/iobroker-data/esphome.0 The five largest files in iobroker-data are: 22M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/firmware.elf 15M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/esp-idf/bt/libbt.a 13M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/poolsensors.map 9.5M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/build.ninja 8.7M /opt/iobroker/iobroker-data/esphome.0/.esphome/build/poolsensors/.pioenvs/poolsensors/compile_commands.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 https://mirrors.aliyun.com/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 https://mirrors.aliyun.com/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 16 Adapter State + system.adapter.admin.0 : admin : iobrokernano - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa-shoppinglist.0 : alexa-shoppinglist : iobrokernano - enabled + system.adapter.alexa2.0 : alexa2 : iobrokernano - enabled system.adapter.alias-manager.0 : alias-manager : iobrokernano - enabled + system.adapter.backitup.0 : backitup : iobrokernano - enabled system.adapter.blueconnect.0 : blueconnect : iobrokernano - enabled + system.adapter.cloud.0 : cloud : iobrokernano - enabled system.adapter.daswetter.0 : daswetter : iobrokernano - enabled + system.adapter.deconz.0 : deconz : iobrokernano - enabled, port: 80 + system.adapter.device-watcher.0 : device-watcher : iobrokernano - enabled + system.adapter.discovery.0 : discovery : iobrokernano - enabled system.adapter.dwd.0 : dwd : iobrokernano - enabled + system.adapter.echarts.0 : echarts : iobrokernano - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: iobrokernano - enabled + system.adapter.esphome.0 : esphome : iobrokernano - enabled + system.adapter.fronius.0 : fronius : iobrokernano - enabled + system.adapter.fullcalendar.0 : fullcalendar : iobrokernano - enabled system.adapter.growatt.0 : growatt : iobrokernano - disabled + system.adapter.gruenbeck.0 : gruenbeck : iobrokernano - enabled + system.adapter.hm-rega.0 : hm-rega : iobrokernano - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobrokernano - enabled, port: 0 system.adapter.hp-ilo.0 : hp-ilo : iobrokernano - disabled system.adapter.ical.0 : ical : iobrokernano - enabled system.adapter.icons-material-svg.0 : icons-material-svg : iobrokernano - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobrokernano - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobrokernano - enabled + system.adapter.influxdb.0 : influxdb : iobrokernano - enabled, port: 8086 + system.adapter.info.0 : info : iobrokernano - enabled + system.adapter.iot.0 : iot : iobrokernano - enabled + system.adapter.javascript.0 : javascript : iobrokernano - enabled system.adapter.javascript.1 : javascript : iobrokernano - disabled system.adapter.javascript.2 : javascript : iobrokernano - disabled + system.adapter.klf200.0 : klf200 : iobrokernano - enabled system.adapter.lametric.0 : lametric : iobrokernano - disabled + system.adapter.linux-control.0 : linux-control : iobrokernano - enabled + system.adapter.melcloud.0 : melcloud : iobrokernano - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : iobrokernano - enabled system.adapter.modbus.0 : modbus : iobrokernano - disabled system.adapter.modbus.1 : modbus : iobrokernano - disabled + system.adapter.modbus.2 : modbus : iobrokernano - enabled + system.adapter.mqtt.0 : mqtt : iobrokernano - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.nanoleaf-lightpanels.1 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.net-tools.0 : net-tools : iobrokernano - enabled + system.adapter.nina.0 : nina : iobrokernano - enabled + system.adapter.nuki-extended.0 : nuki-extended : iobrokernano - enabled + system.adapter.nut.0 : nut : iobrokernano - enabled system.adapter.openweathermap.0 : openweathermap : iobrokernano - enabled + system.adapter.parcel.0 : parcel : iobrokernano - enabled + system.adapter.ping.0 : ping : iobrokernano - enabled system.adapter.proxmox.0 : proxmox : iobrokernano - disabled, port: 8006 + system.adapter.puppeteer.0 : puppeteer : iobrokernano - enabled + system.adapter.pvforecast.0 : pvforecast : iobrokernano - enabled + system.adapter.pvforecast.1 : pvforecast : iobrokernano - enabled + system.adapter.radar-trap.0 : radar-trap : iobrokernano - enabled system.adapter.roborock.0 : roborock : iobrokernano - disabled + system.adapter.scenes.0 : scenes : iobrokernano - enabled + system.adapter.senec.0 : senec : iobrokernano - enabled + system.adapter.shelly.0 : shelly : iobrokernano - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobrokernano - enabled, port: 18087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.smartthings.0 : smartthings : iobrokernano - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobrokernano - enabled system.adapter.systeminfo.0 : systeminfo : iobrokernano - disabled + system.adapter.telegram.0 : telegram : iobrokernano - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobrokernano - enabled + system.adapter.tibberlink.0 : tibberlink : iobrokernano - enabled + system.adapter.time-switch.0 : time-switch : iobrokernano - enabled + system.adapter.traccar.0 : traccar : iobrokernano - enabled + system.adapter.trashschedule.0 : trashschedule : iobrokernano - enabled system.adapter.unifi-protect.0 : unifi-protect : iobrokernano - disabled + system.adapter.unifi.0 : unifi : iobrokernano - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobrokernano - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobrokernano - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobrokernano - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobrokernano - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobrokernano - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobrokernano - enabled system.adapter.vis-justgage.0 : vis-justgage : iobrokernano - enabled system.adapter.vis-map.0 : vis-map : iobrokernano - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : iobrokernano - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobrokernano - enabled system.adapter.vis-metro.0 : vis-metro : iobrokernano - enabled system.adapter.vis-plumb.0 : vis-plumb : iobrokernano - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobrokernano - enabled system.adapter.vis.0 : vis : iobrokernano - disabled + system.adapter.vw-connect.0 : vw-connect : iobrokernano - enabled system.adapter.weatherunderground.0 : weatherunderground : iobrokernano - enabled + system.adapter.web.0 : web : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobrokernano - enabled, port: 9082, bind: 192.168.37.200 (SSL), run as: admin system.adapter.web.2 : web : iobrokernano - disabled, port: 8085, bind: 192.168.37.200, run as: admin + system.adapter.webuntis.0 : webuntis : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.windows-control.0 : windows-control : iobrokernano - enabled + system.adapter.wled.0 : wled : iobrokernano - enabled + system.adapter.wolf-smartset.0 : wolf-smartset : iobrokernano - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobrokernano - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.0 : deconz : iobrokernano - enabled, port: 80 + system.adapter.hm-rpc.0 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobrokernano - enabled, port: 0 + system.adapter.influxdb.0 : influxdb : iobrokernano - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobrokernano - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.nanoleaf-lightpanels.1 : nanoleaf-lightpanels : iobrokernano - enabled, port: 16021 + system.adapter.shelly.0 : shelly : iobrokernano - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobrokernano - enabled, port: 18087, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.telegram.0 : telegram : iobrokernano - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobrokernano - enabled, port: 9082, bind: 192.168.37.200 (SSL), run as: admin + system.adapter.webuntis.0 : webuntis : iobrokernano - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa-shoppinglist": 0.1.5, installed 0.1.5 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "device-watcher": 2.10.5 , installed 2.10.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "fronius" : 2.0.2 , installed 2.0.2 Adapter "fullcalendar" : 2.3.4 , installed 2.3.4 Adapter "growatt" : 3.2.3 , installed 3.2.3 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.16.0 , installed 1.16.0 Adapter "hp-ilo" : 1.0.6 , installed 1.0.6 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "klf200" : 1.2.0 , installed 1.2.0 Adapter "lametric" : 3.1.3 , installed 3.1.3 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "melcloud" : 1.3.7 , installed 1.3.7 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "modbus" : 6.1.0 , installed 6.1.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "nanoleaf-lightpanels": 1.4.0, installed 1.4.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 2.2.3 , installed 2.2.3 Adapter "puppeteer" : 0.2.8 , installed 0.2.8 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "roborock" : 0.4.4 , installed 0.5.4 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "senec" : 1.6.11 , installed 1.6.11 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.4.0 , installed 3.4.0 Adapter "smartthings" : 0.0.4 , installed 0.1.1 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "systeminfo" : 1.1.0 , installed 1.1.0 Adapter "telegram" : 3.1.0 , installed 3.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 2.2.2 , installed 2.2.2 Adapter "traccar" : 1.1.4 , installed 1.1.4 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "unifi" : 0.6.7 , installed 0.6.7 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 2.1.0 , installed 2.1.0 Adapter "vis-map" : 1.0.5 , installed 1.0.5 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "webuntis" : 0.3.4 , installed 0.3.4 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "wolf-smartset": 1.1.1 , installed 1.1.1 Adapter "ws" : 2.5.10 , installed 2.5.10 Objects and States Please stand by - This may take a while Objects: 79970 States: 68203 *** OS-Repositories and Updates *** Hit:1 https://repos.influxdata.com/debian stable InRelease Hit:2 https://mirrors.aliyun.com/debian bookworm InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:4 https://mirrors.aliyun.com/debian-security bookworm-security InRelease Hit:5 https://mirrors.aliyun.com/debian bookworm-updates InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:6052 0.0.0.0:* LISTEN 1001 89783 6105/python3 tcp 0 0 192.168.37.200:9082 0.0.0.0:* LISTEN 1001 48770 3313/io.web.1 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 317 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 4430 883/sshd: /usr/sbin tcp 0 0 0.0.0.0:2001 0.0.0.0:* LISTEN 1001 30815 1300/io.hm-rpc.0 tcp 0 0 0.0.0.0:2010 0.0.0.0:* LISTEN 1001 32886 1488/io.hm-rpc.1 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 3832 1330/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 30232 1472/io.mqtt.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 30233 1472/io.mqtt.0 tcp 0 0 127.0.0.1:37255 0.0.0.0:* LISTEN 1001 39810 2253/chromium tcp 0 0 0.0.0.0:9292 0.0.0.0:* LISTEN 1001 32055 1315/io.hm-rpc.2 tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 107 3378 871/redis-server 12 tcp6 0 0 ::1:6379 :::* LISTEN 107 3379 871/redis-server 12 tcp6 0 0 :::8081 :::* LISTEN 1001 3733 1166/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 43845 2436/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 14943 1040/influxd tcp6 0 0 :::111 :::* LISTEN 0 318 1/init tcp6 0 0 :::22 :::* LISTEN 0 31822 883/sshd: /usr/sbin tcp6 0 0 :::18087 :::* LISTEN 1001 33814 1510/io.simple-api. tcp6 0 0 :::3040 :::* LISTEN 1001 34582 1901/io.radar-trap. tcp6 0 0 :::51989 :::* LISTEN 1001 887 1526/io.nuki-extend udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 42747 2481/io.nanoleaf-li udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 43665 2363/io.nanoleaf-li udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 15003 1193/io.deconz.0 udp 0 0 0.0.0.0:34836 0.0.0.0:* 109 4391 756/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 95242 5978/io.esphome.0 udp 0 0 127.0.0.1:5353 0.0.0.0:* 1001 89789 6105/python3 udp 0 0 192.168.37.200:5353 0.0.0.0:* 1001 89788 6105/python3 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 89784 6105/python3 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 37229 2005/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 109 4389 756/avahi-daemon: r udp 0 0 0.0.0.0:111 0.0.0.0:* 0 17676 1/init udp 0 0 192.168.37.200:123 0.0.0.0:* 102 3431 1029/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 0 3403 1029/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 0 3399 1029/ntpd udp6 0 0 :::1900 :::* 1001 15005 1193/io.deconz.0 udp6 0 0 :::1900 :::* 1001 15004 1193/io.deconz.0 udp6 0 0 :::36195 :::* 109 4392 756/avahi-daemon: r udp6 0 0 :::5353 :::* 109 4390 756/avahi-daemon: r udp6 0 0 :::111 :::* 0 17677 1/init udp6 0 0 fdcf:9dad:fec3:4ad8:123 :::* 102 3605 1029/ntpd udp6 0 0 fe80::a4f4:94ff:fec:123 :::* 102 3434 1029/ntpd udp6 0 0 ::1:123 :::* 0 3405 1029/ntpd udp6 0 0 :::123 :::* 0 3396 1029/ntpd *** Log File - Last 25 Lines *** 2024-03-08 14:14:17.462 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Fenster/ 2024-03-08 14:14:17.462 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Garten/Bewässerung/ 2024-03-08 14:14:17.462 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Garten/Pool/ 2024-03-08 14:14:17.463 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Garten/ 2024-03-08 14:14:17.464 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Heizung/Konvertierungen/ 2024-03-08 14:14:17.464 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Heizung/ 2024-03-08 14:14:17.464 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Klima/ 2024-03-08 14:14:17.464 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Netzwerk/ 2024-03-08 14:14:17.465 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Schalter/DG/ 2024-03-08 14:14:17.465 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Schalter/EG/ 2024-03-08 14:14:17.465 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Schalter/OG/ 2024-03-08 14:14:17.466 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Schalter/ 2024-03-08 14:14:17.466 - info: javascript.0 (11571) Watch /home/iobroker/javascript/System/Instanzen/ 2024-03-08 14:14:17.466 - info: javascript.0 (11571) Watch /home/iobroker/javascript/System/VIS/ 2024-03-08 14:14:17.467 - info: javascript.0 (11571) Watch /home/iobroker/javascript/System/ 2024-03-08 14:14:17.467 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Test/ 2024-03-08 14:14:17.467 - info: javascript.0 (11571) Watch /home/iobroker/javascript/Verbrauch/ 2024-03-08 14:14:17.467 - info: javascript.0 (11571) Watch /home/iobroker/javascript/common/ 2024-03-08 14:14:17.468 - info: javascript.0 (11571) Watch /home/iobroker/javascript/global/ 2024-03-08 14:14:17.468 - info: javascript.0 (11571) Watch /home/iobroker/javascript/ 2024-03-08 14:15:00.029 - info: host.iobrokernano instance system.adapter.blueconnect.0 started with pid 11708 2024-03-08 14:15:12.147 - info: host.iobrokernano instance system.adapter.blueconnect.0 terminated with code 0 (NO_ERROR) 2024-03-08 14:15:41.295 - warn: web.0 (2436) Empty pattern on subscribe! 2024-03-08 14:16:00.034 - info: host.iobrokernano instance system.adapter.dwd.0 started with pid 12222 2024-03-08 14:16:02.905 - info: host.iobrokernano instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)... und bisher funktionieren auch alle Trigger :blush:
Support us
493
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge