Zigbee Adapter Error Send Command failed with no error code

arteck

@stefan-3 sagte in Zigbee Adapter Error Send Command failed with no error code:

Ist denn der Weg über das Upgrade wirklich so falsch?

es ist nicht falsch.. aber wenns dein System steinuralt ist (buster) .. dann JA .neuinstallieren ist besser..
wenn du von einer Version zur anderen gehts dann ... NÖ..
es bleibt jedem selbst überlassen...

Thomas Braun

@stefan-3 sagte in Zigbee Adapter Error Send Command failed with no error code:

Was denn nun? Ist denn der Weg über das Upgrade wirklich so falsch?

Im Fall von Bookworm auf einem Raspberry ja.
Bei dir ist das Bootlayout jetzt falsch, es wird der Bullseye-Kernel geladen. Und du bist immer noch auf einem 32Bit-System.
Aus diesen beiden Gründen ist eine Neuinstallation der einzig sinnvolle Weg.

Davon abgesehen scheinst du ein Thema mit der Stromversorgung zu haben.

Stefan 3

@thomas-braun Ok. Vielen Dank für die Rückmeldungen und die Erklärungen. Neuinstallation ist bereits in Arbeit.

Stefan 3

@thomas-braun Ok, hab nun wie besprochen eine Neuinstallation durchgeführt. Zu meinem Erstaunen kam wieder die Warning

W: http://raspbian.raspberrypi.com/raspbian/dists/bookworm/InRelease: Schlüssel ist im veralteten Schlüsselbund trusted.gpg gespeichert (/etc/apt/trusted.gpg), siehe den Abschnitt MISSBILLIGUNG in apt-key(8) für Details.

welche ich mit:

sudo cp /etc/apt/trusted.gpg /etc/apt/trusted.gpg.d

beseitigt habe. Wie auch immer. Das Zigbee Verhalten ist leider unverändert:

Hat jemand Ideen, wie wir das Zigbee-Problem eingrenzen bzw. beheben können?

Zusatzinfo: Jetziges Ergebnis von iob diag:

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: raspberrypi
       Icon name: computer
Operating System: Raspbian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi8-rpi-v7
    Architecture: arm

Model           : Raspberry Pi 3 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 13:18:00 up 10 min,  2 users,  load average: 1.01, 1.50, 1.00
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
~ Under-voltage detected
~ Arm frequency capped

Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred

*** Time and Time Zones ***
               Local time: Sat 2024-03-02 13:18:01 CET
           Universal time: Sat 2024-03-02 12:18:01 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            966M        613M         87M         24K        326M        353M
Swap:           104M         90M         14M
Total:          1.1G        703M        102M

          921 M total memory
          584 M used memory
          473 M active memory
          291 M inactive memory
           83 M free memory
            4 M buffer memory
          306 M swap cache
           99 M total swap
           86 M used swap
           13 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT                  LOAD   ACTIVE SUB    DESCRIPTION
* bthelper@hci0.service loaded failed failed Raspberry Pi bluetooth helper

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  328M     0  328M   0% /dev
tmpfs          tmpfs      93M 1004K   92M   2% /run
/dev/mmcblk0p2 ext4       29G  4.1G   24G  15% /
tmpfs          tmpfs     461M     0  461M   0% /dev/shm
tmpfs          tmpfs     5.0M   12K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   93M  418M  19% /boot/firmware
tmpfs          tmpfs      93M     0   93M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Mar  2 13:07:34 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=e512d429-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Mar  2 13:07:39 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sat Mar  2 13:07:42 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
802M    /var/
409M    /var/cache
403M    /var/cache/apt
328M    /var/cache/apt/archives
181M    /var/log/journal/228ff7ae2646439a99e8d4b0a8e6fc59

Archived and active journals take up 180.0M in the file system.

/opt/iobroker/backups:
32M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
198M    /opt/iobroker/iobroker-data/
185M    /opt/iobroker/iobroker-data/files
57M     /opt/iobroker/iobroker-data/files/javascript.admin
43M     /opt/iobroker/iobroker-data/files/iot.admin
42M     /opt/iobroker/iobroker-data/files/iot.admin/static/js

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
22M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map
11M     /opt/iobroker/iobroker-data/objects.jsonl
8.5M    /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.1
/usr/bin/node           v18.19.1
/usr/bin/npm            10.2.4
/usr/bin/npx            10.2.4
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.1-1nodesource1
  Candidate: 18.19.1-1nodesource1
  Version table:
 *** 18.19.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.19.0+dfsg-6~deb12u1+rpi1 500
        500 http://raspbian.raspberrypi.com/raspbian bookworm/main armhf Packages
     18.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.8.0

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.feiertage.0              : feiertage             : raspberrypi                              -  enabled
+ system.adapter.fhem.0                   : fhem                  : raspberrypi                              -  enabled, port: 7072
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.solarmanpv.0             : solarmanpv            : raspberrypi                              -  enabled
+ system.adapter.sonos.0                  : sonos                 : raspberrypi                              -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.fhem.0                   : fhem                  : raspberrypi                              -  enabled, port: 7072
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "alexa2"       : 3.26.4   , installed 3.26.4
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "feiertage"    : 1.1.4    , installed 1.1.4
Adapter    "fhem"         : 2.0.5    , installed 2.0.5
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "solarmanpv"   : 0.5.1    , installed 0.5.1
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "web"          : 6.2.3    , installed 6.2.3
Adapter    "ws"           : 2.5.10   , installed 2.5.10
Adapter    "zigbee"       : 1.10.1   , installed 1.10.1

Objects and States
Please stand by - This may take a while
Objects:        3677
States:         2942

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.com/raspbian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:8083            0.0.0.0:*               LISTEN      999        15452      720/perl
tcp        0      0 0.0.0.0:7072            0.0.0.0:*               LISTEN      999        12272      720/perl
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       13962      617/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       13969      617/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15376      646/sshd: /usr/sbin
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       14270      919/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       14062      739/io.admin.0
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       15671      820/io.sonos.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          15378      646/sshd: /usr/sbin
udp        0      0 0.0.0.0:49197           0.0.0.0:*                           104        13736      474/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        13734      474/avahi-daemon: r
udp6       0      0 fe80::69a4:1255:6fd:546 :::*                                0          15445      552/NetworkManager
udp6       0      0 :::54321                :::*                                104        13737      474/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        13735      474/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-03-02 13:10:29.820  - info: alexa2.0 (790) Subscribing to states...
2024-03-02 13:10:33.369  - info: alexa2.0 (790) Alexa-Push-Connection (macDms = true) established. Disable Polling
2024-03-02 13:10:49.106  - info: alexa2.0 (790) Initialization Done ...
2024-03-02 13:12:00.112  - info: host.raspberrypi instance system.adapter.solarmanpv.0 started with pid 1052
2024-03-02 13:12:06.847  - info: solarmanpv.0 (1052) starting. Version 0.5.1 in /opt/iobroker/node_modules/iobroker.solarmanpv, node: v18.19.1, js-controller: 5.0.19
2024-03-02 13:12:11.677  - info: solarmanpv.0 (1052) State value to set for "solarmanpv.0.3104772.221753192.DEV_TYP1" has to be type "number" but received type "string"
2024-03-02 13:12:11.776  - info: solarmanpv.0 (1052) State value to set for "solarmanpv.0.3104772.221753192.COMM_PTC_v1" has to be type "string" but received type "number"
2024-03-02 13:12:11.840  - info: solarmanpv.0 (1052) State value to set for "solarmanpv.0.3104772.221753192.HWv1" has to be type "string" but received type "number"
2024-03-02 13:12:12.441  - info: solarmanpv.0 (1052) State value to set for "solarmanpv.0.3104772.221753192.NOP" has to be type "number" but received type "string"
2024-03-02 13:12:13.299  - info: solarmanpv.0 (1052) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2024-03-02 13:12:13.885  - info: host.raspberrypi instance system.adapter.solarmanpv.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-03-02 13:14:22.112  - info: fhem.0 (805) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2024-03-02 13:16:50.479  - warn: sonos.0 (820) State "sonos.0.root.192_168_123_29.queue_html" has no existing object, this might lead to an error in future versions
2024-03-02 13:18:00.131  - info: host.raspberrypi instance system.adapter.solarmanpv.0 started with pid 1852
2024-03-02 13:18:07.654  - info: solarmanpv.0 (1852) starting. Version 0.5.1 in /opt/iobroker/node_modules/iobroker.solarmanpv, node: v18.19.1, js-controller: 5.0.19
2024-03-02 13:18:11.914  - info: solarmanpv.0 (1852) State value to set for "solarmanpv.0.3104772.221753192.DEV_TYP1" has to be type "number" but received type "string"
2024-03-02 13:18:12.023  - info: solarmanpv.0 (1852) State value to set for "solarmanpv.0.3104772.221753192.COMM_PTC_v1" has to be type "string" but received type "number"
2024-03-02 13:18:12.117  - info: solarmanpv.0 (1852) State value to set for "solarmanpv.0.3104772.221753192.HWv1" has to be type "string" but received type "number"
2024-03-02 13:18:12.871  - info: solarmanpv.0 (1852) State value to set for "solarmanpv.0.3104772.221753192.NOP" has to be type "number" but received type "string"
2024-03-02 13:18:13.794  - info: solarmanpv.0 (1852) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2024-03-02 13:18:14.430  - info: host.raspberrypi instance system.adapter.solarmanpv.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-03-02 13:19:22.113  - info: fhem.0 (805) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360

Stefan 3

@stefan-3 Die Raspi3 Versorgung hab ich übrigens auch überprüft: USB Kabel um ca. 50cm gekürzt und dann an der Lötstelle gemessen: +4,95V, von der USB Spec +5V-5%=+4,75V also deutlich entfernt, selbst wenn dann noch einige mV über das restliche Kabel und den Pi3 USB Stecker abfallen.

Wildbill

@stefan-3 Der Raspi ist halt empfindlich und möchte gerne 5-5,1V um stabil zu laufen. Du bist unter 5V, also reicht ihm das halt nicht immer.
Die originalen Netzteile liefern bei ihrer maximalen Belastbarkeit immer noch 5V.

Gruss, Jürgen

Thomas Braun

@stefan-3

Warum hast du denn da noch eine 32bit-Installation laufen? Ich hatte ja bei Neuinstallation auch direkt 64bit genommen.

Stefan 3

@thomas-braun Ich versuche das ganze Wochenende schon Debian V12 64Bit auf dem Raspi3 zu installieren, habe aber Schwierigkeiten mit den Schlüsseln. Bei der iob Installation wird gemeldet:

pi@raspberrypi:~ $ curl -sSLf https://iobroker.net/install.sh | bash -
library: loaded
Library version=2024-01-04

==========================================================================

    Welcome to the ioBroker installer!
    Installer version: 2024-01-04

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/4)
==========================================================================

Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Err:4 http://archive.raspberrypi.com/debian bookworm InRelease
  The following signatures couldn't be verified because the public key is not av                                                                                                             ailable: NO_PUBKEY 82B129927FA3303E
Reading package lists... Done
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://archive.raspberrypi.com/debian bookworm InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 82B129927FA3303E
W: Failed to fetch http://archive.raspberrypi.com/debian/dists/bookworm/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 82B129927FA3303E
W: Some index files failed to download. They have been ignored, or old ones used instead.

Und bei der FHEM Installation ähnlich:

pi@raspberrypi:~ $ sudo wget -qO - https://debian.fhem.de/archive.key | apt-key add -
Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
E: This command can only be used by root.
pi@raspberrypi:~ $ sudo echo "deb http://debian.fhem.de/nightly/ /" >> /etc/apt/sources.list
-bash: /etc/apt/sources.list: Permission denied
pi@raspberrypi:~ $ sudo apt update
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Get:3 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease
Err:5 http://archive.raspberrypi.com/debian bookworm InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 82B129927FA3303E
Fetched 55.4 kB in 3s (21.0 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://archive.raspberrypi.com/debian bookworm InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 82B129927FA3303E
W: Failed to fetch http://archive.raspberrypi.com/debian/dists/bookworm/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 82B129927FA3303E
W: Some index files failed to download. They have been ignored, or old ones used instead.
pi@raspberrypi:~ $ sudo apt install fhem
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
fhem is already the newest version (6.0.).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Thomas Braun

@stefan-3

Der key für debian muss bei einer Installation gleich mitkommen.
Und bei fhem wird das alte Verfahren via apt-key verwendet. Geht aber auf einem Bookworm nicht mehr.
Warum verwendest du keine aktuelle Anleitung? Da ist es richtig:

https://debian.fhem.de/

Stefan 3

@thomas-braun a) Zu "Der key ... muss gleich mitkommen": Ich hab das Image über Raspberry Pi Imager aufgespielt. Und dennoch erhalte ich bei der iob Installation die Fehlermeldung. Ich weiß ehrlich gesagt nicht, was ich da hätte anders machen sollen.
b) Zu "aktuelle FHEM Anleitung": Dass apt-key mit Bookworm nicht mehr geht, war mir nicht bewusst. Die Seite https://debian.fhem.de/ habe ich sehr wohl ausprobiert. Die FHEM Installation mittels apt funktioniert jedoch nicht. Ergebnis:

pi@raspberrypi:~ $ wget -O- https://debian.fhem.de/archive.key | gpg --dearmor |                                                                                                              sudo tee /usr/share/keyrings/debianfhemde-archive-keyring.gpg
--2024-03-04 22:39:16--  https://debian.fhem.de/archive.key
Resolving debian.fhem.de (debian.fhem.de)... 2600:9000:21f3:d200:15:107d:a980:93                                                                                                             a1, 2600:9000:21f3:ce00:15:107d:a980:93a1, 2600:9000:21f3:8600:15:107d:a980:93a1                                                                                                             , ...
Connecting to debian.fhem.de (debian.fhem.de)|2600:9000:21f3:d200:15:107d:a980:9                                                                                                             3a1|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2428 (2.4K) [application/pgp-keys]
Saving to: ‘STDOUT’

-                   100%[===================>]   2.37K  --.-KB/s    in 0.001s

2024-03-04 22:39:16 (4.07 MB/s) - written to stdout [2428/2428]

▒▒e<▒
▒p▒aWT▒-▒▒▒T▒v1▒yq▒RG▒▒▒▒}▒▒▒#1/Z▒▒W▒s▒f\▒▒Q▒;▒Z▒z8W▒▒y▒S,x▒+▒Y ZG
▒▒▒^▒▒ut▒B▒▒H%▒▒▒`J]b▒h▒WU*6▒▒▒▒"▒*▒Sx▒▒}#▒G▒▒o+▒ڎ▒▒s▒ϼ▒▒Ò▒▒6▒O▒0▒$▒▒V0▒▒▒▒F▒N#▒                                                                                                             u▒▒▒▒▒▒▒▒D*0.▒M▒▒A▒▒▒%▒▒
▒a▒B?▒▒▒.| ▒▒ؙO▒▒ѺR▒▒▒xd▒}▒OY▒▒LϚ▒s▒̵̗▒(▒▒▒▒▒▒ѭW▒\v▒^▒▒▒W>▒ۥ▒H▒▒lD9i▒.$▒_▒▒~K?▒6N▒                                                                                                             ▒▒M4c▒#▒▒k▒▒>▒%▒▒▒k▒▒5▒ZU1sE▒▒Jc'+▒
betateilchen▒▒
>!1▒▒H▒Y▒▒/▒▒F▒▒q0Ie<▒
                        g


       ▒
        ▒F▒▒q0I▒▒
                 ▒c▒▒F▒oC9▒ϲ▒B▒▒M;▒▒▒K▒3▒-Ro▒/!▒▒lv▒▒#,*a`J▒▒▒Y~9=-~▒u▒m֛▒▒
>uR▒W▒▒q▒Q▒▒Iv▒՝zw,rVi▒!➼▒▒m<▒▒`2▒▒▒e ▒`▒M▒▒]▒▒q▒ۧ▒"▒w`.0▒o@▒wF▒2n▒a▒S▒P▒)▒rq▒▒▒1                                                                                                             K9▒V▒ã6o▒▒S▒I   ▒▒\▒>u▒#▒&-▒ئ▒▒EB▒
▒:▒▒s▒pb
▒L▒.▒+▒;ڥ▒▒p▒9▒▒▒▒c.▒▒?▒e▒▒k▒▒9O▒▒%5Y▒"P▒k.▒.▒▒=▒k▒▒▒m9▒▒6▒.▒=▒g▒▒j#T▒B▒▒▒R
I▒۴<(0▒[▒y<Y▒▒"▒RJ▒▒/Hd▒▒▒Zӕ▒T▒▒e<▒
▒▒▒▒▒▒b▒▒
         ▒▒F▒▒by▒▒h▒8▒▒m▒EaJ▒▒ȁ▒▒Ǐ▒▒▒▒▒ӣ5▒fY▒`▒,9▒▒X{▒▒z▒CU▒▒▒6▒▒x1▒o▒_u9▒▒▒▒?▒&                                                                                                             ▒W▒▒y▒P▒▒H▒▒ܺ▒▒v$k▒▒▒p,n~▒#▒▒`Ɠϳf▒F2Vm▒$]_I▒▒▒▒M▒$▒jw▒▒▒n
                                                        YYfׅ▒g▒▒▒▒Q▒▒s▒▒4▒▒vY▒▒v▒                                                                                                             k▒▒c?▒▒b0▒j▒=n▒▒'▒▒=▒▒▒▒▒=g▒p▒&Ў*▒fl߭▒B/k=▒g
                                           l▒ֲF▒$▒▒▒▒▒▒zB{▒▒6▒,^▒▒gM▒5▒w▒▒z▒z▒▒`▒                                                                                                             ▒U+Kom▒▒
&!1▒▒H▒Y▒▒/▒▒F▒▒q0Ie<▒
        g
        ▒F▒▒q0Iw4
                 ▒9▒d▒Ox▒▒▒y▒▒
                              ▒▒S▒▒<y▒G▒▒▒▒KV▒{▒;▒▒\▒▒!▒q[▒[n▒▒JM|X64jJ▒V▒_;0▒▒5                                                                                                             ▒*Z
d'▒i1`▒;8f      i▒aH8▒|/+▒▒▒R▒▒,▒s▒i|M▒▒&▒▒bl▒ǀ+h%
▒b▒▒▒$▒N:<▒'▒/▒ۅ▒▒\`▒B=▒4▒7▒^9▒6)▒▒%Bo&▒▒N׍▒[:
 ▒▒+▒t▒"+¶▒sӉ▒W

(▒%Z▒▒▒b▒▒▒H▒s▒H3/▒▒
                    ▒b▒▒qI▒6u▒K▒X
p▒9lC▒Q˯▒p▒▒▒▒▒▒|▒▒▒^#▒▒▒▒▒▒P▒ש▒▒ɨ▒ͥb#▒+▒A▒ ▒Ҽ▒▒۹▒=▒?▒d:▒▒B▒H▒▒▒▒`cF3▒}▒,jpi@rasp                                                                                                             pi@raspberrypi:~ $ PuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTYPuTTY

Die manuelle FHEM Installation funktioniert hingegen.

sudo apt -y install perl-base libdevice-serialport-perl libwww-perl libio-socket-ssl-perl libcgi-pm-perl libjson-perl sqlite3 libdbd-sqlite3-perl libtext-diff-perl libtimedate-perl libmail-imapclient-perl libgd-graph-perl libtext-csv-perl libxml-simple-perl liblist-moreutils-perl fonts-liberation libimage-librsvg-perl libgd-text-perl libsocket6-perl libio-socket-inet6-perl libmime-base64-perl libimage-info-perl libusb-1.0-0-dev libnet-server-perl libreadonly-perl
sudo apt -y install libdate-manip-perl libhtml-treebuilder-xpath-perl libmojolicious-perl libxml-bare-perl libauthen-oath-perl libconvert-base32-perl libmodule-pluggable-perl libnet-bonjour-perl libcrypt-urandom-perl nodejs npm libnet-dbus-perl
wget http://fhem.de/fhem-6.3.deb
sudo dpkg -i fhem-6.3.deb

Ok, somit wäre die FHEM Installation gelöst, gleichwohl ich nicht verstehe, warum es mit dem key-Befehl nicht geht. Die Ausgabe auf STDOUT=Bildschirm ist doch Quatsch, oder? Aber wohin soll der key?
Wenn ich hingegen iob versuche zu installieren, meckert er wegen den Schlüsseln und bleibt bei der Installation bei Schritt 3/4 hängen (keine Fehlermeldung, nichts, nach 20 Minuten immernoch nichts). Hilft nur noch hart ausschalten. Danach geht die Installation etwas weiter, bleibt aber dann bei einem späteren Installationspunkt hängen. Im dritten Anlauf geht die Installationsroutine dann durch. Eine vertrauenswürdige Installation sieht aber anders aus.

Thomas Braun

@stefan-3

Zu a): Ist so... Keine Ahnung was du da wie installiert hast.
Zu b):

Nachdem ich der Anleitung gefolgt bin:

thomas@roamer:~$ apt policy fhem
fhem:
  Installiert:           (keine)
  Installationskandidat: 6.3.28591
  Versionstabelle:
     6.3.28591 500
        500 https://debian.fhem.de/nightly  Packages
     6.2.28436 500
        500 https://debian.fhem.de/nightly  Packages

Leg das ordentlich über das Repo an und nicht am Paketmanager vorbei:

wget -O- https://debian.fhem.de/archive.key | gpg --dearmor | sudo tee /usr/share/keyrings/debianfhemde-archive-keyring.gpg > /dev/null
echo "deb [signed-by=/usr/share/keyrings/debianfhemde-archive-keyring.gpg] https://debian.fhem.de/nightly/ /" | sudo tee /etc/apt/sources.list.d/fhem.list
sudo apt update
sudo apt install fhem

Thomas Braun

@stefan-3 sagte in Zigbee Adapter Error Send Command failed with no error code:

Hilft nur noch hart ausschalten.

Strg-C ist dein Freund... Oder Strg-Alt-Entfernen...
Oder der Linux-Affengriff...

Aber NIE, NIE, NIE einfach per Stromexekution wegknallen.

Stefan 3

@thomas-braun

Leg das ordentlich über das Repo an

Das hatte ich ja probiert, aber bereits bei

wget -O- https://debian.fhem.de/archive.key | gpg --dearmor | sudo tee /usr/share/keyrings/debianfhemde-archive-keyring.gpg

wird nur Schrott am Bildschirm ausgegeben und das spätere "apt install fhem" schlägt dann fehl. Ich kann heute Abend aber gerne die komplette Abfolge posten.

Thomas Braun

@stefan-3 sagte in Zigbee Adapter Error Send Command failed with no error code:

wird nur Schrott am Bildschirm ausgegeben

Das ist kein Schrott, das ist der entpackte key...
Ich hatte dir aber oben Befehle gegeben, die das sauberer darstellen.

Stefan 3

@thomas-braun Ok, ich stelle eben fest, dass Du die Installationsanleitung von https://debian.fhem.de/ abgewandelt hast, so dass der Schlüssel nicht mehr auf dem Bildschirm ausgegeben wird. Also nochmal komplett von Null. Raspi Imager Screenshots. Zur Info: Bei Modell auswählen = Raspi 3 wird Bookworm nicht angezeigt, sondern nur Bullseye 32 oder 64bit. Ich lasse Modell daher frei, um Bookworm überhaupt auswählen zu können:

Dann

sudo apt update && sudo apt full-upgrade
sudo reboot

Danach die FEHM Installation:

pi@raspberrypi:~ $ wget -O- https://debian.fhem.de/archive.key | gpg --dearmor | sudo tee /usr/share/keyrings/debianfhemde-archive-keyring.gpg > /dev/null
--2024-03-06 23:15:31--  https://debian.fhem.de/archive.key
Resolving debian.fhem.de (debian.fhem.de)... 2600:9000:21f3:1c00:15:107d:a980:93a1, 2600:9000:21f3:8200:15:107d:a980:93a1, 2600:9000:21f3:e200:15:107d:a980:93a1, ...
Connecting to debian.fhem.de (debian.fhem.de)|2600:9000:21f3:1c00:15:107d:a980:93a1|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2428 (2.4K) [application/pgp-keys]
Saving to: ‘STDOUT’

-                                               100%[====================================================================================================>]   2.37K  --.-KB/s    in 0s

2024-03-06 23:15:31 (41.2 MB/s) - written to stdout [2428/2428]

pi@raspberrypi:~ $ echo "deb [signed-by=/usr/share/keyrings/debianfhemde-archive-keyring.gpg] https://debian.fhem.de/nightly/ /" | tee /etc/apt/sources.list.d/fhem.list
tee: /etc/apt/sources.list.d/fhem.list: Permission denied
deb [signed-by=/usr/share/keyrings/debianfhemde-archive-keyring.gpg] https://debian.fhem.de/nightly/ /
pi@raspberrypi:~ $ sudo apt update
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
pi@raspberrypi:~ $ sudo apt install fhem
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package fhem

Thomas Braun

@stefan-3

Da war noch ein Fehlerchen drin.

echo "deb [signed-by=/usr/share/keyrings/debianfhemde-archive-keyring.gpg] https://debian.fhem.de/nightly/ /" | sudo tee /etc/apt/sources.list.d/fhem.list
sudo apt update
sudo apt install fhem

sollte funktionieren.

Stefan 3

@thomas-braun Tippi toppi :+1: So funktioiniert nun die FHEM Installation. Vielen herzlichen Dank schonmal. Hast Du Kontakte zum FHEM Team um die Anleitung auf https://debian.fhem.de/ zu bereinigen? Ansonsten versuch ich da mein Glück.
Danach hab ich die iob Installation versucht.

pi@raspberrypi:~ $ curl -sSLf https://iobroker.net/install.sh | bash -
library: loaded
Library version=2024-01-04

==========================================================================

    Welcome to the ioBroker installer!
    Installer version: 2024-01-04

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/4)
==========================================================================

Hit:1 http://deb.debian.org/debian bookworm InRelease
Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB]
Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://debian.fhem.de/nightly  InRelease
Fetched 48.0 kB in 2s (22.4 kB/s)
Reading package lists... Done

==========================================================================

    Node.js not found. Installing...

==========================================================================

rm: cannot remove '/etc/apt/keyrings/nodesource.gpg': No such file or directory
deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001
 Processing triggers for man-db (2.11.2-2) ...ource1_arm64.deb ...led.)
Installed nodejs
Node.js Installed successfully!
Changing npm registry to https://registry.npmjs.org
 Processing triggers for man-db (2.11.2-2) ...arm64.deb ... installed.)
Installed acl
 Setting up libavahi-compat-libdnssd-dev:arm64 (0.8-10) ...-10_arm64.deb ...
Installed libavahi-compat-libdnssd-dev
 Processing triggers for man-db (2.11.2-2) ...1) ...1_arm64.deb ...ed.)
Installed libudev-dev
 Processing triggers for man-db (2.11.2-2) ...eb12u1) ...1_arm64.deb ...
Installed libpam0g-dev
 Processing triggers for man-db (2.11.2-2) ...m64.deb ......installed.)
Installed git
Extracting templates from packages: 100%
 Setting up libcairo2-dev:arm64 (1.16.0-7+rpt1) ....u4) ...t1) .........rm64.deb ...
Installed libcairo2-dev
 Processing triggers for libc-bin (2.36-9+rpt2+deb12u4) ...m64.deb ... ....
Installed libpango1.0-dev
 Setting up libjpeg-dev:arm64 (1:2.1.5-2) ...5-2) ...4.deb ....deb ...)
Installed libjpeg-dev
 Processing triggers for libc-bin (2.36-9+rpt2+deb12u4) ... installed.)
Installed libgif-dev
 Processing triggers for libgdk-pixbuf-2.0-0:arm64 (2.42.10+dfsg-1+b1) ..........
Installed librsvg2-dev
 Processing triggers for libc-bin (2.36-9+rpt2+deb12u4) .....nstalled.)
Installed cmake

==========================================================================
    Creating ioBroker user and directory (2/4)
==========================================================================

User iobroker created
Created /etc/sudoers.d/iobroker
Directory /opt/iobroker created

==========================================================================
    Installing ioBroker (3/4)
==========================================================================

(##################) ⠦ reify:iobroker.admin: http fetch GET 200 https://registry.npmjs.org/iobroker.admin/-/iobroker.admin-6.13.16.tgz 47759ms (cache miss)

Dann war über 20 Min. keine Reaktion mehr zu verzeichnen, auch mit Strg+C.
Ich schließe also einen Monitor am Raspi an. Zuerst steht nur Login da, dann:
hwmon hwmon1: Undervoltage detected!
Obwohl ich inzwischen ein Labornetzteil mit +5,5V/3A, dickes Kabel und 220µF Abblock-C dicht am Raspi einsetze. Über Putty komm ich auch nicht mehr drauf. Reboot durch alt+Druck über Tastatur am Raspi. Dann erneuter Versuch der iob Installation. Diesmal läuft es durch.

pi@raspberrypi:~ $ curl -sSLf https://iobroker.net/install.sh | bash -
library: loaded
Library version=2024-01-04

==========================================================================

    Welcome to the ioBroker installer!
    Installer version: 2024-01-04

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/4)
==========================================================================

Hit:1 http://deb.debian.org/debian bookworm InRelease
Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB]
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://debian.fhem.de/nightly  InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:6 http://archive.raspberrypi.com/debian bookworm InRelease
Fetched 48.0 kB in 3s (18.3 kB/s)
Reading package lists... Done

==========================================================================
    Creating ioBroker user and directory (2/4)
==========================================================================

Created /etc/sudoers.d/iobroker
Directory /opt/iobroker created

==========================================================================
    Installing ioBroker (3/4)
==========================================================================


==========================================================================
    Finalizing installation (4/4)
==========================================================================

Enabling autostart...
Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service.
Autostart enabled!
Fixing directory permissions...

==========================================================================

    ioBroker was installed successfully
    Open http://192.168.123.57:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!

Morgen spiel ich die Adapter drauf und dann sehen wir weiter bzgl. dem eigentlichen Zigbee Problem.

Thomas Braun

@stefan-3

Nein, mit FHEM hab ich nix am Hut.

arteck

@stefan-3 ist ja nicht dein ernst...iobroker übernimmt FHEM support... geil...

Stefan 3

@arteck So, System wie gesagt neu aufgesetzt, FHEM und IOB installiert. RAM war am Anschlag, so dass ich eine 2GB Swap-Datei eingerichtet hab. Der Zigbee-Fehler ist unverändert da

Zusatzinfo: Jetziges Ergebnis von iob diag:

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: raspberrypi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi8-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 3 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 18:10:05 up 23 min,  2 users,  load average: 0.26, 0.21, 0.33
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
~ Under-voltage has occurred

*** Time and Time Zones ***
               Local time: Fri 2024-03-08 18:10:05 CET
           Universal time: Fri 2024-03-08 17:10:05 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            952M        747M        112M        188K        153M        205M
Swap:           2.3G        252M        2.0G
Total:          3.2G        1.0G        2.1G

          908 M total memory
          712 M used memory
          455 M active memory
          253 M inactive memory
          107 M free memory
           10 M buffer memory
          135 M swap cache
         2147 M total swap
          241 M used swap
         1906 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  319M     0  319M   0% /dev
tmpfs          tmpfs      91M  1.1M   90M   2% /run
/dev/mmcblk0p2 ext4       29G  5.9G   22G  22% /
tmpfs          tmpfs     455M     0  455M   0% /dev/shm
tmpfs          tmpfs     5.0M   12K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   61M  450M  12% /boot/firmware
tmpfs          tmpfs      91M     0   91M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Mar  8 17:46:20 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=d46b09f2-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Mar  8 17:46:26 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Fri Mar  8 17:46:30 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
753M    /var/
285M    /var/log/journal/b97363623a9b4bc5bc8e5d0296596227
285M    /var/log/journal
285M    /var/log
203M    /var/cache

Archived and active journals take up 284.0M in the file system.

/opt/iobroker/backups:
8.4M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
199M    /opt/iobroker/iobroker-data/
186M    /opt/iobroker/iobroker-data/files
57M     /opt/iobroker/iobroker-data/files/javascript.admin
43M     /opt/iobroker/iobroker-data/files/iot.admin
42M     /opt/iobroker/iobroker-data/files/iot.admin/static/js

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
22M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map
11M     /opt/iobroker/iobroker-data/objects.jsonl
8.5M    /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.1
/usr/bin/node           v18.19.1
/usr/bin/npm            10.2.4
/usr/bin/npx            10.2.4
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.1-1nodesource1
  Candidate: 18.19.1-1nodesource1
  Version table:
 *** 18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.8.0

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
  system.adapter.feiertage.0              : feiertage             : raspberrypi                              -  enabled
+ system.adapter.fhem.0                   : fhem                  : raspberrypi                              -  enabled, port: 7072
  system.adapter.history.0                : history               : raspberrypi                              - disabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.solarmanpv.0             : solarmanpv            : raspberrypi                              -  enabled
+ system.adapter.sonos.0                  : sonos                 : raspberrypi                              -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.fhem.0                   : fhem                  : raspberrypi                              -  enabled, port: 7072
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "alexa2"       : 3.26.4   , installed 3.26.4
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "feiertage"    : 1.1.4    , installed 1.1.4
Adapter    "fhem"         : 2.0.5    , installed 2.0.5
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "solarmanpv"   : 0.5.1    , installed 0.5.1
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "web"          : 6.2.3    , installed 6.2.3
Adapter    "ws"           : 2.5.10   , installed 2.5.10
Adapter    "zigbee"       : 1.10.1   , installed 1.10.1

Objects and States
Please stand by - This may take a while
Objects:        3724
States:         2904

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 https://debian.fhem.de/nightly  InRelease
Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       12870      629/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       13810      629/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13768      686/sshd: /usr/sbin
tcp        0      0 0.0.0.0:7072            0.0.0.0:*               LISTEN      999        12858      770/perl
tcp        0      0 0.0.0.0:8083            0.0.0.0:*               LISTEN      999        15825      770/perl
tcp6       0      0 :::22                   :::*                    LISTEN      0          13770      686/sshd: /usr/sbin
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       15988      857/io.sonos.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       14048      931/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15899      788/io.admin.0
udp        0      0 0.0.0.0:56381           0.0.0.0:*                           104        12601      491/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        12599      491/avahi-daemon: r
udp6       0      0 fe80::2157:f17c:c3f:546 :::*                                0          15821      582/NetworkManager
udp6       0      0 :::44614                :::*                                104        12602      491/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        12600      491/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-03-08 18:00:33.396  - error: zigbee.0 (880) Send command to 0x00124b0018d534f5 failed with no error code (undefined)
2024-03-08 18:01:00.626  - debug: alexa2.0 (824) Alexa-Remote HTTP2-PUSH: Send Ping
2024-03-08 18:02:55.680  - info: fhem.0 (840) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2024-03-08 18:04:00.626  - debug: alexa2.0 (824) Alexa-Remote HTTP2-PUSH: Send Ping
2024-03-08 18:05:00.133  - info: javascript.0 (795) script.js.common.V1a_Beregnung: Nächste Beregnung Programm 1a aktualisiert auf: 03/09/2024 18:00
2024-03-08 18:06:00.096  - info: host.raspberrypi instance system.adapter.solarmanpv.0 started with pid 1082
2024-03-08 18:06:04.154  - info: solarmanpv.0 (1082) starting. Version 0.5.1 in /opt/iobroker/node_modules/iobroker.solarmanpv, node: v18.19.1, js-controller: 5.0.19
2024-03-08 18:06:06.251  - info: solarmanpv.0 (1082) State value to set for "solarmanpv.0.3104772.221753192.DEV_TYP1" has to be type "number" but received type "string"
2024-03-08 18:06:06.339  - info: solarmanpv.0 (1082) State value to set for "solarmanpv.0.3104772.221753192.COMM_PTC_v1" has to be type "string" but received type "number"
2024-03-08 18:06:06.398  - info: solarmanpv.0 (1082) State value to set for "solarmanpv.0.3104772.221753192.HWv1" has to be type "string" but received type "number"
2024-03-08 18:06:06.933  - info: solarmanpv.0 (1082) State value to set for "solarmanpv.0.3104772.221753192.NOP" has to be type "number" but received type "string"
2024-03-08 18:06:07.622  - info: solarmanpv.0 (1082) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2024-03-08 18:06:08.190  - info: host.raspberrypi instance system.adapter.solarmanpv.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-03-08 18:07:00.626  - debug: alexa2.0 (824) Alexa-Remote HTTP2-PUSH: Send Ping
2024-03-08 18:07:55.641  - info: fhem.0 (840) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2024-03-08 18:10:00.626  - debug: alexa2.0 (824) Alexa-Remote HTTP2-PUSH: Send Ping
2024-03-08 18:12:00.092  - info: host.raspberrypi instance system.adapter.solarmanpv.0 started with pid 1908
2024-03-08 18:12:04.893  - info: solarmanpv.0 (1908) starting. Version 0.5.1 in /opt/iobroker/node_modules/iobroker.solarmanpv, node: v18.19.1, js-controller: 5.0.19
2024-03-08 18:12:14.391  - info: solarmanpv.0 (1908) State value to set for "solarmanpv.0.3104772.221753192.DEV_TYP1" has to be type "number" but received type "string"
2024-03-08 18:12:14.500  - info: solarmanpv.0 (1908) State value to set for "solarmanpv.0.3104772.221753192.COMM_PTC_v1" has to be type "string" but received type "number"
2024-03-08 18:12:14.572  - info: solarmanpv.0 (1908) State value to set for "solarmanpv.0.3104772.221753192.HWv1" has to be type "string" but received type "number"
2024-03-08 18:12:15.297  - info: solarmanpv.0 (1908) State value to set for "solarmanpv.0.3104772.221753192.NOP" has to be type "number" but received type "string"
2024-03-08 18:12:16.099  - info: solarmanpv.0 (1908) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2024-03-08 18:12:16.702  - info: host.raspberrypi instance system.adapter.solarmanpv.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Community Forum

NEWS

Zigbee Adapter Error Send Command failed with no error code

Support us

230

32.4k

81.4k

1.3m