NEWS
Fehlermeldung vom WS-adapter
Einsteigerfragen
51
Beiträge
5
Kommentatoren
5.3k
Aufrufe
4
Watching
-
den bekomm ich nicht ans laufen, er will irgendwie den Stick nicht sehen, ( tty(usb)
HejoSta
@hejosta sagte in Fehlermeldung vom WS-adapter:
( tty(usb)
Ist ja auch... Irgendwas...
Falsches, vermutlich... -
@thomas-braun
oder das hier
<======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 14:33:16 up 6 days, 19:54, 2 users, load average: 0.02, 0.07, 0.09 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-01-29 14:33:16 CET Universal time: Mon 2024-01-29 13:33:16 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** hstark /home/hstark hstark adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.3G 254M 57K 502M 677M Swap: 104M 1.6M 103M Total: 2.0G 1.3G 358M 1848 M total memory 1202 M used memory 1240 M active memory 219 M inactive memory 243 M free memory 72 M buffer memory 406 M swap cache 99 M total swap 1 M used swap 98 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 661M 0 661M 0% /dev tmpfs tmpfs 185M 1.2M 184M 1% /run /dev/mmcblk0p2 ext4 29G 3.9G 24G 15% / tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Jan 22 18:38:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:70:03:81 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=c2e517b8-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=GE [Mon Jan 22 18:38:33 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Jan 22 18:38:35 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 594M /var/ 211M /var/cache 205M /var/cache/apt 166M /var/lib 132M /var/lib/apt/lists Archived and active journals take up 115.4M in the file system. /opt/iobroker/backups: 25M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 223M /opt/iobroker/iobroker-data/ 177M /opt/iobroker/iobroker-data/files 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static 47M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 9.0M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js 7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.d3cce782.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400350-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.deconz.0 : deconz : iobroker - enabled, port: 80 + system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 system.adapter.icons-material-png.0 : icons-material-png : iobroker - disabled system.adapter.icons-material-svg.0 : icons-material-svg : iobroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1884, bind: 0.0.0.0 system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - disabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker - enabled, port: 8084, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.0 : deconz : iobroker - enabled, port: 80 + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker - enabled, port: 8084, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.3.0 , installed 1.3.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Objects and States Please stand by - This may take a while Objects: 1451 States: 1081 *** OS-Repositories and Updates *** W: http://phoscon.de/apt/deconz/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://phoscon.de/apt/deconz bookworm InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... W: http://phoscon.de/apt/deconz/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Pending Updates: 16 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 1685428 844777/io.sonoff.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 1688667 844764/io.mqtt.0 tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 17592 464/deCONZ tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 1895 701/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 15622 701/iobroker.js-con tcp 0 0 192.168.0.22:12010 0.0.0.0:* LISTEN 1001 2116906 1061311/io.hm-rpc.1 tcp 0 0 192.168.0.22:12001 0.0.0.0:* LISTEN 1001 2114199 1061304/io.hm-rpc.0 tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 16530 464/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16597 725/sshd: /usr/sbin tcp6 0 0 :::8084 :::* LISTEN 1001 1688671 844822/io.ws.0 tcp6 0 0 :::8082 :::* LISTEN 1001 1688657 844798/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 1685391 844682/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 16599 725/sshd: /usr/sbin udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 1687211 844698/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 1687208 844698/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 15606 464/deCONZ udp 0 0 0.0.0.0:56259 0.0.0.0:* 104 15328 457/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 15326 457/avahi-daemon: r udp6 0 0 fe80::690a:a09e:56d:546 :::* 0 2114352 592/NetworkManager udp6 0 0 fe80::5ea8:b27d:a30:546 :::* 0 2114350 592/NetworkManager udp6 0 0 :::1900 :::* 1001 1687213 844698/io.deconz.0 udp6 0 0 :::1900 :::* 1001 1687212 844698/io.deconz.0 udp6 0 0 :::1900 :::* 1001 1687210 844698/io.deconz.0 udp6 0 0 :::1900 :::* 1001 1687209 844698/io.deconz.0 udp6 0 0 :::5353 :::* 104 15327 457/avahi-daemon: r udp6 0 0 :::54702 :::* 104 15329 457/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-29 14:10:03.329 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:11:03.334 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:12:03.339 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:13:03.344 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:14:03.351 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:15:03.358 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:16:03.367 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:17:03.375 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:18:03.382 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:19:03.387 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:20:03.394 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:21:03.404 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:22:03.412 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:23:03.419 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:24:03.427 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:25:03.434 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:26:03.442 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:27:03.449 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:28:03.457 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:29:03.461 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:30:03.466 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:31:03.470 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:32:03.475 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:33:03.482 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22 2024-01-29 14:34:03.487 - error: ws.0 (844822) Error: "error" - No sid found from ::ffff:192.168.0.22============ Mark until here for C&P =============
@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400350-if00
das wäre dein Stick
-
@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400350-if00
das wäre dein Stick
@homoran sagte in Fehlermeldung vom WS-adapter:
@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400350-if00
das wäre dein Stick
ja, das hab ich auch drin, aber er startet nicht richtig. Steht auf 115200 Baud
Hejosta
pi 4 B 2G
iobroker V6.12.0
Plattform: linux
RAM: 1.8 GB
Node.js: v18.19.0
NPM: 10.2.3 -
@homoran sagte in Fehlermeldung vom WS-adapter:
@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400350-if00
das wäre dein Stick
ja, das hab ich auch drin, aber er startet nicht richtig. Steht auf 115200 Baud
Hejosta
@hejosta sagte in Fehlermeldung vom WS-adapter:
aber er startet nicht richtig.
Und das tut der nicht ohne Einträge im Logfile.
-
@homoran sagte in Fehlermeldung vom WS-adapter:
@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400350-if00
das wäre dein Stick
ja, das hab ich auch drin, aber er startet nicht richtig. Steht auf 115200 Baud
Hejosta
-
<
ZeitNachricht zigbee.0 2024-02-19 19:09:28.703 error Error herdsman start zigbee.0 2024-02-19 19:09:28.702 error Failed to start Zigbee zigbee.0 2024-02-19 19:09:28.701 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/ttyACM0'" zigbee.0 2024-02-19 19:09:28.514 info Installed Version: iobroker.zigbee@1.10.1 zigbee.0 2024-02-19 19:09:28.501 info Starting Zigbee npm ... zigbee.0 2024-02-19 19:09:28.500 info Try to reconnect. 1 attempts left >MOD-EDIT: Code in code-tags gesetzt!
das ist das log...
wie kann ich das andere adaptereinstellung zeigen?pi 4 B 2G
iobroker V6.12.0
Plattform: linux
RAM: 1.8 GB
Node.js: v18.19.0
NPM: 10.2.3 -
<
ZeitNachricht zigbee.0 2024-02-19 19:09:28.703 error Error herdsman start zigbee.0 2024-02-19 19:09:28.702 error Failed to start Zigbee zigbee.0 2024-02-19 19:09:28.701 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/ttyACM0'" zigbee.0 2024-02-19 19:09:28.514 info Installed Version: iobroker.zigbee@1.10.1 zigbee.0 2024-02-19 19:09:28.501 info Starting Zigbee npm ... zigbee.0 2024-02-19 19:09:28.500 info Try to reconnect. 1 attempts left >MOD-EDIT: Code in code-tags gesetzt!
das ist das log...
wie kann ich das andere adaptereinstellung zeigen?@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/ttyACM0'"
Ich dachte du hättest den by-id-Link drin...
Deconz darf auch nicht parallel laufen. -
<
ZeitNachricht zigbee.0 2024-02-19 19:09:28.703 error Error herdsman start zigbee.0 2024-02-19 19:09:28.702 error Failed to start Zigbee zigbee.0 2024-02-19 19:09:28.701 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/ttyACM0'" zigbee.0 2024-02-19 19:09:28.514 info Installed Version: iobroker.zigbee@1.10.1 zigbee.0 2024-02-19 19:09:28.501 info Starting Zigbee npm ... zigbee.0 2024-02-19 19:09:28.500 info Try to reconnect. 1 attempts left >MOD-EDIT: Code in code-tags gesetzt!
das ist das log...
wie kann ich das andere adaptereinstellung zeigen?@hejosta sagte in Fehlermeldung vom WS-adapter:
wie kann ich das andere adaptereinstellung zeigen?
Mit einem Screenshot
-
@hejosta sagte in Fehlermeldung vom WS-adapter:
wie kann ich das andere adaptereinstellung zeigen?
Mit einem Screenshot
-
@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/ttyACM0'"
Ich dachte du hättest den by-id-Link drin...
Deconz darf auch nicht parallel laufen.@thomas-braun sagte in Fehlermeldung vom WS-adapter:
@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/ttyACM0'"
Ich dachte du hättest den by-id-Link drin...
Deconz darf auch nicht parallel laufen.ist abgeschaltet
pi 4 B 2G
iobroker V6.12.0
Plattform: linux
RAM: 1.8 GB
Node.js: v18.19.0
NPM: 10.2.3 -
<
file:///home/hstark/Downloads/Screenshot%202024-02-19%20at%2019-19-54%20instances%20-%20iobroker.png >@hejosta wie befürchtet!
@hejosta sagte in Fehlermeldung vom WS-adapter:
das hab ich auch drin
hast du nicht!
-
@thomas-braun sagte in Fehlermeldung vom WS-adapter:
@hejosta sagte in Fehlermeldung vom WS-adapter:
/dev/ttyACM0'"
Ich dachte du hättest den by-id-Link drin...
Deconz darf auch nicht parallel laufen.ist abgeschaltet
@hejosta sagte in Fehlermeldung vom WS-adapter:
ist abgeschaltet
Auch der Service?
systemctl status deconz*checken.
-
@hejosta sagte in Fehlermeldung vom WS-adapter:
ist abgeschaltet
Auch der Service?
systemctl status deconz*checken.
<
deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabl> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 488 (deCONZ) Tasks: 6 (limit: 1585) CPU: 1min 42.251s CGroup: /system.slice/deconz.service └─488 /usr/bin/deCONZ -platform minimal --http-port=80 Feb 19 15:52:03 iobroker systemd[1]: Started deconz.service - deCONZ: ZigBee ga> Feb 19 15:52:05 iobroker deCONZ[488]: QStandardPaths: XDG_RUNTIME_DIR not set, > Feb 19 15:52:05 iobroker deCONZ[488]: libpng warning: iCCP: known incorrect sRG> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:10 iobroker deCONZ[488]: This plugin does not support propagateSiz> ● deconz-update.service - deCONZ: ZigBee gateway -- Update Service Loaded: loaded (/lib/systemd/system/deconz-update.service; disabled; prese> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 485 (deCONZ-update2.) Tasks: 2 (limit: 1585) CPU: 3min 36.365s CGroup: /system.slice/deconz-update.service >MOD-EDIT: Code in code-tags gesetzt!
pi 4 B 2G
iobroker V6.12.0
Plattform: linux
RAM: 1.8 GB
Node.js: v18.19.0
NPM: 10.2.3 -
<
deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabl> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 488 (deCONZ) Tasks: 6 (limit: 1585) CPU: 1min 42.251s CGroup: /system.slice/deconz.service └─488 /usr/bin/deCONZ -platform minimal --http-port=80 Feb 19 15:52:03 iobroker systemd[1]: Started deconz.service - deCONZ: ZigBee ga> Feb 19 15:52:05 iobroker deCONZ[488]: QStandardPaths: XDG_RUNTIME_DIR not set, > Feb 19 15:52:05 iobroker deCONZ[488]: libpng warning: iCCP: known incorrect sRG> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:10 iobroker deCONZ[488]: This plugin does not support propagateSiz> ● deconz-update.service - deCONZ: ZigBee gateway -- Update Service Loaded: loaded (/lib/systemd/system/deconz-update.service; disabled; prese> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 485 (deCONZ-update2.) Tasks: 2 (limit: 1585) CPU: 3min 36.365s CGroup: /system.slice/deconz-update.service >MOD-EDIT: Code in code-tags gesetzt!
-
<
deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabl> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 488 (deCONZ) Tasks: 6 (limit: 1585) CPU: 1min 42.251s CGroup: /system.slice/deconz.service └─488 /usr/bin/deCONZ -platform minimal --http-port=80 Feb 19 15:52:03 iobroker systemd[1]: Started deconz.service - deCONZ: ZigBee ga> Feb 19 15:52:05 iobroker deCONZ[488]: QStandardPaths: XDG_RUNTIME_DIR not set, > Feb 19 15:52:05 iobroker deCONZ[488]: libpng warning: iCCP: known incorrect sRG> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:10 iobroker deCONZ[488]: This plugin does not support propagateSiz> ● deconz-update.service - deCONZ: ZigBee gateway -- Update Service Loaded: loaded (/lib/systemd/system/deconz-update.service; disabled; prese> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 485 (deCONZ-update2.) Tasks: 2 (limit: 1585) CPU: 3min 36.365s CGroup: /system.slice/deconz-update.service >MOD-EDIT: Code in code-tags gesetzt!
@hejosta sagte in Fehlermeldung vom WS-adapter:
active (running)
und bitte
@thomas-braun sagte in Fehlermeldung vom WS-adapter:
CodeTags verwenden.
und das Fenster des Terminals breiter ziehen. Da sind die Zeilen abgeschnitten
-
@hejosta sagte in Fehlermeldung vom WS-adapter:
active (running)
und bitte
@thomas-braun sagte in Fehlermeldung vom WS-adapter:
CodeTags verwenden.
und das Fenster des Terminals breiter ziehen. Da sind die Zeilen abgeschnitten
@homoran sagte in Fehlermeldung vom WS-adapter:
@hejosta sagte in Fehlermeldung vom WS-adapter:
active (running)
und bitte
@thomas-braun sagte in Fehlermeldung vom WS-adapter:
CodeTags verwenden.
und das Fenster des Terminals breiter ziehen. Da sind die Zeilen abgeschnitten
<
● deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabl> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 488 (deCONZ) Tasks: 6 (limit: 1585) CPU: 1min 42.251s CGroup: /system.slice/deconz.service └─488 /usr/bin/deCONZ -platform minimal --http-port=80 Feb 19 15:52:03 iobroker systemd[1]: Started deconz.service - deCONZ: ZigBee ga> Feb 19 15:52:05 iobroker deCONZ[488]: QStandardPaths: XDG_RUNTIME_DIR not set, > Feb 19 15:52:05 iobroker deCONZ[488]: libpng warning: iCCP: known incorrect sRG> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:10 iobroker deCONZ[488]: This plugin does not support propagateSiz> ● deconz-update.service - deCONZ: ZigBee gateway -- Update Service Loaded: loaded (/lib/systemd/system/deconz-update.service; disabled; prese> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 485 (deCONZ-update2.) Tasks: 2 (limit: 1585) CPU: 3min 36.365s CGroup: /system.slice/deconz-update.service >MOD-EDIT: Code in code-tags gesetzt!
pi 4 B 2G
iobroker V6.12.0
Plattform: linux
RAM: 1.8 GB
Node.js: v18.19.0
NPM: 10.2.3 -
@homoran sagte in Fehlermeldung vom WS-adapter:
@hejosta sagte in Fehlermeldung vom WS-adapter:
active (running)
und bitte
@thomas-braun sagte in Fehlermeldung vom WS-adapter:
CodeTags verwenden.
und das Fenster des Terminals breiter ziehen. Da sind die Zeilen abgeschnitten
<
● deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabl> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 488 (deCONZ) Tasks: 6 (limit: 1585) CPU: 1min 42.251s CGroup: /system.slice/deconz.service └─488 /usr/bin/deCONZ -platform minimal --http-port=80 Feb 19 15:52:03 iobroker systemd[1]: Started deconz.service - deCONZ: ZigBee ga> Feb 19 15:52:05 iobroker deCONZ[488]: QStandardPaths: XDG_RUNTIME_DIR not set, > Feb 19 15:52:05 iobroker deCONZ[488]: libpng warning: iCCP: known incorrect sRG> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:10 iobroker deCONZ[488]: This plugin does not support propagateSiz> ● deconz-update.service - deCONZ: ZigBee gateway -- Update Service Loaded: loaded (/lib/systemd/system/deconz-update.service; disabled; prese> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 485 (deCONZ-update2.) Tasks: 2 (limit: 1585) CPU: 3min 36.365s CGroup: /system.slice/deconz-update.service >MOD-EDIT: Code in code-tags gesetzt!
@hejosta und wo ist jetzt der Unterschied zum letzten mal?
das sieht für mich identisch aus.
-
@homoran sagte in Fehlermeldung vom WS-adapter:
@hejosta sagte in Fehlermeldung vom WS-adapter:
active (running)
und bitte
@thomas-braun sagte in Fehlermeldung vom WS-adapter:
CodeTags verwenden.
und das Fenster des Terminals breiter ziehen. Da sind die Zeilen abgeschnitten
<
● deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabl> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 488 (deCONZ) Tasks: 6 (limit: 1585) CPU: 1min 42.251s CGroup: /system.slice/deconz.service └─488 /usr/bin/deCONZ -platform minimal --http-port=80 Feb 19 15:52:03 iobroker systemd[1]: Started deconz.service - deCONZ: ZigBee ga> Feb 19 15:52:05 iobroker deCONZ[488]: QStandardPaths: XDG_RUNTIME_DIR not set, > Feb 19 15:52:05 iobroker deCONZ[488]: libpng warning: iCCP: known incorrect sRG> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:07 iobroker deCONZ[488]: This plugin does not support propagateSiz> Feb 19 15:52:10 iobroker deCONZ[488]: This plugin does not support propagateSiz> ● deconz-update.service - deCONZ: ZigBee gateway -- Update Service Loaded: loaded (/lib/systemd/system/deconz-update.service; disabled; prese> Active: active (running) since Mon 2024-02-19 15:52:03 CET; 3h 37min ago Main PID: 485 (deCONZ-update2.) Tasks: 2 (limit: 1585) CPU: 3min 36.365s CGroup: /system.slice/deconz-update.service >MOD-EDIT: Code in code-tags gesetzt!
-
nun scheint er zu laufen! ich meld mich morgen mit einem abschluss
Schönen Abend noch
HejoSta@hejosta und wofür der Downvote?
Support us
818
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge