Shelly 2.5 PM Random AxiosError: timeout of 8000ms exceeded
-
@thomas-braun sorry für die späte Rückmeldung, hier die Ausgabe von iob diag
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 12:05:53 up 1 day, 23:20, 1 user, load average: 0.74, 0.67, 0.52 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sat 2024-01-27 12:05:53 CET Universal time: Sat 2024-01-27 11:05:53 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: LXDE-pi Terminal: x11 Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.0G 222M 13M 616M 730M Swap: 99M 5.0M 94M Total: 2.0G 1.0G 317M 1872 M total memory 1033 M used memory 281 M active memory 1245 M inactive memory 222 M free memory 76 M buffer memory 539 M swap cache 99 M total swap 5 M used swap 94 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * webmin.service loaded failed failed LSB: web-based administration interface for Unix systems LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 6.7G 50G 12% / devtmpfs devtmpfs 776M 0 776M 0% /dev tmpfs tmpfs 937M 0 937M 0% /dev/shm tmpfs tmpfs 937M 9.6M 927M 2% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 937M 0 937M 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 188M 12K 188M 1% /run/user/1000 /dev/sda2 fuseblk 5.5T 1.1T 4.4T 21% /media/pi/External Drive Messages concerning ext4 filesystem in dmesg: [Thu Jan 25 12:45:31 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60D smsc95xx.macaddr=DC:A6:32:33:13:2B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=db8ba147-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Jan 25 12:45:32 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Thu Jan 25 12:45:32 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Thu Jan 25 12:45:34 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/media/pi/External Drive /dev/sda2 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 Files in neuralgic directories: /var: 519M /var/ 245M /var/lib 123M /var/lib/mysql 122M /var/cache 107M /var/cache/apt Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 861M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 293M /opt/iobroker/iobroker-data/ 163M /opt/iobroker/iobroker-data/files 97M /opt/iobroker/iobroker-data/backup-objects 77M /opt/iobroker/iobroker-data/files/javascript.admin 56M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 9.1M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js 7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map 7.2M /opt/iobroker/iobroker-data/objects.json.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/local/bin/npm 9.6.7 /usr/local/bin/npx 9.6.7 /usr/local/bin/corepack 0.18.0 *** nodejs is NOT correctly installed *** nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.chromecast.0 : chromecast : raspberrypi - disabled system.adapter.cloud.0 : cloud : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.denon.0 : denon : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 + system.adapter.info.0 : info : raspberrypi - enabled system.adapter.iot.0 : iot : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - disabled, port: 54321 system.adapter.mihome-vacuum.1 : mihome-vacuum : raspberrypi - disabled, port: 54321 + system.adapter.nibeuplink.0 : nibeuplink : raspberrypi - enabled system.adapter.onvif.0 : onvif : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - disabled system.adapter.pushbullet.0 : pushbullet : raspberrypi - disabled + system.adapter.pushover.0 : pushover : raspberrypi - enabled system.adapter.roborock.0 : roborock : raspberrypi - disabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.3.24 system.adapter.shelly.1 : shelly : raspberrypi - disabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.tapo.0 : tapo : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin system.adapter.web.1 : web : raspberrypi - disabled, port: 8092, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.3.24 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.24.1 [Updatable] Adapter "backitup" : 2.9.8 , installed 2.1.13 [Updatable] Adapter "chromecast" : 3.0.3 , installed 2.3.1 [Updatable] Adapter "cloud" : 4.4.1 , installed 4.1.0 [Updatable] Adapter "daswetter" : 3.1.12 , installed 3.1.10 [Updatable] Adapter "denon" : 1.15.4 , installed 1.7.4 [Updatable] Adapter "discovery" : 4.2.0 , installed 2.3.5 [Updatable] Adapter "followthesun" : 0.5.0 , installed 0.3.5 [Updatable] Adapter "hm-rpc" : 1.15.19 , installed 1.14.2 [Updatable] Adapter "info" : 2.0.0 , installed 1.7.2 [Updatable] Adapter "iot" : 2.0.11 , installed 1.8.22 [Updatable] Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "mihome-vacuum": 4.1.1 , installed 4.1.1 Adapter "nibeuplink" : 1.3.1 , installed 1.3.0 [Updatable] Adapter "onvif" : 1.1.1 , installed 1.0.5 [Updatable] Adapter "openweathermap": 1.0.4 , installed 0.4.5 [Updatable] Adapter "pushbullet" : 2.0.1 , installed 0.0.11 [Updatable] Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "ring" : 5.0.10 , installed 1.1.3 [Updatable] Adapter "roborock" : 0.4.4 , installed 0.2.1 [Updatable] Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 3.0.7 [Updatable] Adapter "sonoff" : 3.0.3 , installed 2.5.3 [Updatable] Adapter "tapo" : 0.0.8 , installed 0.0.8 Adapter "vis" : 1.5.4 , installed 1.3.4 [Updatable] Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Adapter "zigbee2mqtt" : 2.13.4 , installed 2.9.0 [Updatable] Objects and States Please stand by - This may take a while Objects: 5455 States: 4432 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17236 641/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 3648546 18053/cupsd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 19186 745/smbd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 31116 2196/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 31109 2196/iobroker.js-co tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 114 21509 720/mysqld tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 19187 745/smbd tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 19095 617/vncserver-x11-c tcp6 0 0 :::8081 :::* LISTEN 1001 31162 2214/io.admin.0 tcp6 0 0 :::10001 :::* LISTEN 0 19154 751/apache2 tcp6 0 0 :::8082 :::* LISTEN 1001 30650 2357/io.web.0 tcp6 0 0 :::10002 :::* LISTEN 0 19158 751/apache2 tcp6 0 0 :::22 :::* LISTEN 0 17238 641/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 3648545 18053/cupsd tcp6 0 0 :::8087 :::* LISTEN 1001 33099 2753/io.simple-api. tcp6 0 0 :::445 :::* LISTEN 0 19184 745/smbd tcp6 0 0 :::139 :::* LISTEN 0 19185 745/smbd tcp6 0 0 :::5900 :::* LISTEN 0 19094 617/vncserver-x11-c udp 0 0 0.0.0.0:54188 0.0.0.0:* 1001 4743979 22913/io.shelly.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 4737900 22913/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16631 593/dhcpcd udp 0 0 0.0.0.0:51820 0.0.0.0:* 0 19842 - udp 0 0 0.0.0.0:631 0.0.0.0:* 0 3648552 18055/cups-browsed udp 0 0 192.168.3.255:137 0.0.0.0:* 0 20706 599/nmbd udp 0 0 192.168.3.24:137 0.0.0.0:* 0 20705 599/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 20693 599/nmbd udp 0 0 192.168.3.255:138 0.0.0.0:* 0 20708 599/nmbd udp 0 0 192.168.3.24:138 0.0.0.0:* 0 20707 599/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 20694 599/nmbd udp 0 0 0.0.0.0:41133 0.0.0.0:* 108 13269 348/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13267 348/avahi-daemon: r udp6 0 0 :::58973 :::* 108 13270 348/avahi-daemon: r udp6 0 0 :::51820 :::* 0 19843 - udp6 0 0 :::5353 :::* 108 13268 348/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-27 12:03:00.949 - info: simple-api.0 (2753) State value to set for "javascript.0.scriptEnabled.Rolllaeden_hoch" has to be type "boolean" but received type "number" 2024-01-27 12:03:01.032 - info: javascript.0 (2236) Stop script script.js.Rolllaeden_hoch 2024-01-27 12:03:01.199 - info: simple-api.0 (2753) State value to set for "javascript.0.scriptEnabled.Rolllaeden_runter" has to be type "boolean" but received type "number" 2024-01-27 12:03:01.395 - info: javascript.0 (2236) Start javascript script.js.Rolllaeden_runter 2024-01-27 12:03:01.504 - info: javascript.0 (2236) script.js.Rolllaeden_runter: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-01-27 12:03:06.217 - info: simple-api.0 (2753) State value to set for "javascript.0.scriptEnabled.Rolllaeden_runter" has to be type "boolean" but received type "number" 2024-01-27 12:03:06.289 - info: javascript.0 (2236) Stop script script.js.Rolllaeden_runter 2024-01-27 12:03:06.421 - info: simple-api.0 (2753) State value to set for "javascript.0.scriptEnabled.Rolllaeden_hoch" has to be type "boolean" but received type "number" 2024-01-27 12:03:06.436 - info: javascript.0 (2236) Start javascript script.js.Rolllaeden_hoch 2024-01-27 12:03:06.490 - info: javascript.0 (2236) script.js.Rolllaeden_hoch: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-01-27 12:03:09.910 - error: shelly.0 (22913) [http controlFunction] Error in function state.coap.http_cmd of state SHSW-25#E8DB84AA6A80#1.Shutter.Position for 192.168.3.132 (shellyswitch25 / shellyswitch25-E8DB84AA6A80 / SHSW-25#E8DB84AA6A80#1): AxiosError: timeout of 8000ms exceeded 2024-01-27 12:03:09.925 - error: shelly.0 (22913) [http controlFunction] Error in function state.coap.http_cmd of state SHSW-25#E8DB84ACC809#1.Shutter.Position for 192.168.3.114 (shellyswitch25 / shellyswitch25-E8DB84ACC809 / SHSW-25#E8DB84ACC809#1): AxiosError: timeout of 8000ms exceeded 2024-01-27 12:03:10.637 - info: shelly.0 (22913) [CoAP] Device 192.168.3.109 (shellyswitch25 / shellyswitch25-E8DB84AA1F6E / SHSW-25#E8DB84AA1F6E#1) connected! Polltime set to 15 sec. 2024-01-27 12:03:14.534 - error: shelly.0 (22913) [http controlFunction] Error in function state.coap.http_cmd of state SHSW-25#E8DB84ACC809#1.Shutter.Position for 192.168.3.114 (shellyswitch25 / shellyswitch25-E8DB84ACC809 / SHSW-25#E8DB84ACC809#1): AxiosError: timeout of 8000ms exceeded 2024-01-27 12:04:13.640 - info: shelly.0 (22913) [CoAP] Device 192.168.3.131 (shellyswitch25 / shellyswitch25-E8DB84ACB936 / SHSW-25#E8DB84ACB936#1) connected! Polltime set to 15 sec. ============ Mark until here for C&P ============= iob diag has finished. -
@smartguy1994 sagte in Shelly 2.5 PM Random AxiosError: timeout of 8000ms exceeded:
GNU/Linux 10 (buster)
Kannst du direkt auf 12 Bookworm bringen.
Neuinstallation in der 64Bit-Variante, natürlich ohne Desktop-Quark.Dann wäre auch dein nodejs-Krempel senkrecht und der Update-Stau ist auch zu beseitigen.
-
@thomas-braun das wollte ich eigentlich vermeiden, da ich im Sommer auf Home Assistent umsteige und Debian 10 zumindest bis zum Sommer ja noch supportet wird.
-
Nein. Raspberry OS 10 wird nicht mehr unterstützt, weil Raspberry nur das aktuelle und vorherige Release supporten.
Und dein nodejs ist trotzdem krumm. Und die Adapter sind trotzdem nicht auf aktuellem Stand.
iob nodejs-updateausführen und die Adapter updaten.
-
@thomas-braun ich verstehe, das hatte ich nicht auf dem Schirm.
Ich habe nodejs bei mir gerade gezogen und noch alle ausstehenden Updates nachgeholt.Problem besteht leider trotzdem unverändert.
Danke für eure Hilfe
-
-
@smartguy1994 hast du die shelly mal rebootet und sind die shelly auch ereichbar über die weboberfläche wenn du den Error im ioBroker hast?
-
@thomas-braun ```
======== Start marking the full check here =========*** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 13:13:06 up 38 min, 2 users, load average: 0.40, 1.11, 1.49 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sat 2024-01-27 13:13:07 CET Universal time: Sat 2024-01-27 12:13:07 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** /home/iobroker/.diag.sh: line 200: [[: 675 4331: syntax error in expression (error token is "4331") X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 996M 228M 14M 647M 763M Swap: 99M 10M 89M Total: 2.0G 1.0G 318M 1872 M total memory 996 M used memory 330 M active memory 1183 M inactive memory 228 M free memory 102 M buffer memory 545 M swap cache 99 M total swap 10 M used swap 89 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * webmin.service loaded failed failed LSB: web-based administration interface for Unix systems LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 6.9G 50G 13% / devtmpfs devtmpfs 776M 0 776M 0% /dev tmpfs tmpfs 937M 0 937M 0% /dev/shm tmpfs tmpfs 937M 9.6M 927M 2% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 937M 0 937M 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 188M 12K 188M 1% /run/user/1000 /dev/sda2 fuseblk 5.5T 1.1T 4.4T 21% /media/pi/External Drive tmpfs tmpfs 188M 0 188M 0% /run/user/112 Messages concerning ext4 filesystem in dmesg: [Sat Jan 27 12:34:50 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60D smsc95xx.macaddr=DC:A6:32:33:13:2B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=db8ba147-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sat Jan 27 12:34:51 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Sat Jan 27 12:34:51 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sat Jan 27 12:34:53 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 |-/run/user/112/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=112,group_id=118 |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/media/pi/External Drive /dev/sda2 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 Files in neuralgic directories: /var: 520M /var/ 245M /var/lib 123M /var/lib/mysql 122M /var/cache 107M /var/cache/apt Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 861M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 331M /opt/iobroker/iobroker-data/ 201M /opt/iobroker/iobroker-data/files 97M /opt/iobroker/iobroker-data/backup-objects 77M /opt/iobroker/iobroker-data/files/javascript.admin 56M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 13M /opt/iobroker/iobroker-data/objects.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.chromecast.0 : chromecast : raspberrypi - disabled system.adapter.cloud.0 : cloud : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.denon.0 : denon : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 + system.adapter.info.0 : info : raspberrypi - enabled system.adapter.iot.0 : iot : raspberrypi - disabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - disabled, port: 54321 system.adapter.mihome-vacuum.1 : mihome-vacuum : raspberrypi - disabled, port: 54321 + system.adapter.nibeuplink.0 : nibeuplink : raspberrypi - enabled system.adapter.onvif.0 : onvif : raspberrypi - disabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - disabled system.adapter.pushbullet.0 : pushbullet : raspberrypi - disabled + system.adapter.pushover.0 : pushover : raspberrypi - enabled system.adapter.roborock.0 : roborock : raspberrypi - disabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.3.24 system.adapter.shelly.1 : shelly : raspberrypi - disabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.tapo.0 : tapo : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin system.adapter.web.1 : web : raspberrypi - disabled, port: 8092, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 192.168.3.24 + system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.12 , installed 3.1.12 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "followthesun" : 0.5.0 , installed 0.5.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "mihome-vacuum": 4.1.1 , installed 4.1.1 Adapter "nibeuplink" : 1.3.1 , installed 1.3.1 Adapter "onvif" : 1.1.1 , installed 1.1.1 Adapter "openweathermap": 1.0.4 , installed 1.0.4 Adapter "pushbullet" : 2.0.1 , installed 2.0.1 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "roborock" : 0.4.4 , installed 0.4.4 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tapo" : 0.0.8 , installed 0.0.8 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Adapter "zigbee2mqtt" : 2.13.4 , installed 2.13.4 Objects and States Please stand by - This may take a while Objects: 6382 States: 5153 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 20773 644/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15806 344/cupsd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 19098 740/smbd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 31882 2753/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 31530 2753/iobroker.js-co tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 114 18996 719/mysqld tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 19099 740/smbd tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 19831 638/vncserver-x11-c tcp6 0 0 :::8081 :::* LISTEN 1001 30615 2771/io.admin.0 tcp6 0 0 :::10001 :::* LISTEN 0 18297 741/apache2 tcp6 0 0 :::8082 :::* LISTEN 1001 56535 5932/io.web.0 tcp6 0 0 :::10002 :::* LISTEN 0 18301 741/apache2 tcp6 0 0 :::22 :::* LISTEN 0 20775 644/sshd tcp6 0 0 :::8087 :::* LISTEN 1001 33303 3079/io.simple-api. tcp6 0 0 ::1:631 :::* LISTEN 0 15805 344/cupsd tcp6 0 0 :::445 :::* LISTEN 0 19096 740/smbd tcp6 0 0 :::139 :::* LISTEN 0 19097 740/smbd tcp6 0 0 :::5900 :::* LISTEN 0 19830 638/vncserver-x11-c udp 0 0 0.0.0.0:42468 0.0.0.0:* 108 15026 334/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 60492 6095/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16062 591/dhcpcd udp 0 0 0.0.0.0:51820 0.0.0.0:* 0 20812 - udp 0 0 0.0.0.0:631 0.0.0.0:* 0 17270 496/cups-browsed udp 0 0 192.168.3.255:137 0.0.0.0:* 0 18868 603/nmbd udp 0 0 192.168.3.24:137 0.0.0.0:* 0 18867 603/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 18855 603/nmbd udp 0 0 192.168.3.255:138 0.0.0.0:* 0 18870 603/nmbd udp 0 0 192.168.3.24:138 0.0.0.0:* 0 18869 603/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 18856 603/nmbd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15024 334/avahi-daemon: r udp6 0 0 :::51820 :::* 0 20813 - udp6 0 0 :::5353 :::* 108 15025 334/avahi-daemon: r udp6 0 0 :::56057 :::* 108 15027 334/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-27 13:06:08.979 - info: javascript.0 (2788) Start javascript script.js.Rolllaeden_hoch 2024-01-27 13:06:09.043 - info: javascript.0 (2788) script.js.Rolllaeden_hoch: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-01-27 13:06:46.518 - info: simple-api.0 (3079) State value to set for "javascript.0.scriptEnabled.Rolllaeden_hoch" has to be type "boolean" but received type "number" 2024-01-27 13:06:46.529 - info: javascript.0 (2788) Stop script script.js.Rolllaeden_hoch 2024-01-27 13:06:46.732 - info: simple-api.0 (3079) State value to set for "javascript.0.scriptEnabled.Rolllaeden_runter" has to be type "boolean" but received type "number" 2024-01-27 13:06:46.749 - info: javascript.0 (2788) Start javascript script.js.Rolllaeden_runter 2024-01-27 13:06:46.827 - info: javascript.0 (2788) script.js.Rolllaeden_runter: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions2024-01-27 13:06:46.856 - warn: shelly.0 (6095) [http controlFunction] Unable to perform request - device 192.168.3.132 (shellyswitch25 / shellyswitch25-E8DB84AA6A80 / SHSW-25#E8DB84AA6A80#1) is offline 2024-01-27 13:06:46.865 - warn: shelly.0 (6095) [http controlFunction] Unable to perform request - device 192.168.3.131 (shellyswitch25 / shellyswitch25-E8DB84ACB936 / SHSW-25#E8DB84ACB936#1) is offline 2024-01-27 13:06:53.945 - info: simple-api.0 (3079) State value to set for "javascript.0.scriptEnabled.Rolllaeden_runter" has to be type "boolean" but received type "number" 2024-01-27 13:06:53.957 - info: javascript.0 (2788) Stop script script.js.Rolllaeden_runter 2024-01-27 13:06:54.159 - info: simple-api.0 (3079) State value to set for "javascript.0.scriptEnabled.Rolllaeden_hoch" has to be type "boolean" but received type "number" 2024-01-27 13:06:54.172 - info: javascript.0 (2788) Start javascript script.js.Rolllaeden_hoch 2024-01-27 13:06:54.238 - info: javascript.0 (2788) script.js.Rolllaeden_hoch: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2024-01-27 13:06:54.296 - warn: shelly.0 (6095) [http controlFunction] Unable to perform request - device 192.168.3.132 (shellyswitch25 / shellyswitch25-E8DB84AA6A80 / SHSW-25#E8DB84AA6A80#1) is offline 2024-01-27 13:06:54.303 - warn: shelly.0 (6095) [http controlFunction] Unable to perform request - device 192.168.3.131 (shellyswitch25 / shellyswitch25-E8DB84ACB936 / SHSW-25#E8DB84ACB936#1) is offline 2024-01-27 13:08:33.923 - info: shelly.0 (6095) [CoAP] Device 192.168.3.114 (shellyswitch25 / shellyswitch25-E8DB84ACC809 / SHSW-25#E8DB84ACC809#1) connected! Polltime set to 30 sec. 2024-01-27 13:08:46.350 - info: javascript.0 (2788) script.js.Pool_Temperatur_Steuerung_Pumpe_Winter: Außentemperatur: 2.7 2024-01-27 13:08:46.421 - info: javascript.0 (2788) script.js.Pool_Temperatur_Steuerung_Pumpe_Winter: Ende des Laufs 2024-01-27 13:08:46.437 - info: javascript.0 (2788) script.js.Pool_Temperatur_Steuerung_Pumpe_Winter: ['wui.init('syrFLLjsQaPD2MyaDfAS8xOaevpyskOM',false);','syrFLLjsQaPD2MyaDfAS8xOaevpyskOM'] 2024-01-27 13:08:46.499 - info: javascript.0 (2788) script.js.Pool_Temperatur_Steuerung_Pumpe_Winter: Aktuelle Wassertemperatur: 3.1 2024-01-27 13:08:46.499 - info: javascript.0 (2788) script.js.Pool_Temperatur_Steuerung_Pumpe_Winter: Aktueller Wert: 2 , Gewünschter Wert: 2 2024-01-27 13:10:41.265 - warn: zigbee.0 (2854) DeviceAvailability:Stopping to ping 0xec1bbdfffea3e7cc TS011F after 4 ping attempts 2024-01-27 13:12:22.613 - info: admin.0 (2771) <== Disconnect system.user.admin from ::ffff:192.168.3.154 admin 2024-01-27 13:13:15.478 - info: admin.0 (2771) ==> Connected system.user.admin from ::ffff:192.168.3.154============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
-
@fa-bio ja sind über die Weboberfläche erreichbar und steuerbar. Neugestartet habe ich sie auch schon.
-
@smartguy1994 hm das ist komisch was sind denn die Schutter Daten die du überträgts kannst du das mal zeigen.
-
@fa-bio
-
@smartguy1994 hast du schon mal probiert andere Prozentwerte zu nehmen also zum Beispiel 50% ist das Verhalten dann immer noch so?
Sind die alle über den Shelly Adapter eingebunden, wenn ja, kannst du in den Datenpunkten selber die Prozentzahl ändern und was passiert dann? -
@fa-bio ja das Verhalten ist dabei leider das selbe
-
@smartguy1994 also halten wir fest über die Webseite oder App geht der Shelly einwandfrei über ioBroker Adapter nicht oder nicht richtig. Also dann weiß ich auch nicht weiter. Evtl mal die Einstellungen vom Shelly Adapter bitte zeigen.
Ich empfehle dir auch alles auf den neusten Stand zu bringen.
Ansonten auf Github ein Issues öffnen.Grüße
Fabio -
@fa-bio
Aber wenn ihr auch keine Idee habt stelle ich das als Issue bei GitHub ein.
Vielen lieben Dank euch für euren Einsatz.
-
@smartguy1994 mach mal bitte den Haken weg bei "aktualiseren auch wenn keine werte" starte dann neu und probiere noch mal.
-
@smartguy1994 sorry wenn ich mich da nochmal einklinke...
warum steuerst du die dinger nicht automatisch über die app, oder verwendest den adapter shuttercontrol für automatisierung?
lieber mit js rumfummeln?
die dinger funktionieren einwandfrei, da wird IMHO ein issue auf github auch nicht helfen. -
@da_woody als ich es vor einigen Jahren gebastelt hatte war das die einfachste Lösung für meine Anforderung. Jetzt werde ich dann wahrscheinlich sowieso auf Home Assistent umsteigen, auch um meine Custom Web UI abzulösen die ich vor einigen Jahren für den ioBroker Rest Api Adapter gebaut hatte.
Da ist die GUI schon out-of-the-box für mich stimmig.Ich danke euch für eure Unterstützung.
-
@smartguy1994 wünsche dir viel Spass und Erfolg!
Als nicht progger bin ich mit HASS nicht zurecht gekommen. So wie mit OpenHAB.
