Test Adapter TP-Link Tapo

tombox

@saarlanduhu bitte überprüfen ob sich die GitHub version anders verhält

SaarlandUHU

@tombox nach dem Start des Adapters läuft er einmal die Geräte durch, die er kennt und gibt die oben genannte Meldung dann einmal aus. Danach folgt die Meldung "52 - Get Device Info failed" Das wars.
Für mich passt das so.
Gehe gleich mal noch ne Steckdose holen und überprüfe, was passiert, wenn ich dann eine Steckdose wieder einstecke.

Vielen Dank schonmal bis hierhin.

SaarlandUHU

@tombox wenn ich eine Steckdose einstecke, stellt der Adapter nicht direkt eine Verbindung her. In der Tapo-App erscheint die Steckdose direkt. Der Adapter stellt aber erst eine Verbindung her, nachdem ich den Adapter neu gestartet habe.
Beim erneuten ausstecken der Steckdose kommen ein paar reconnect -Versuche, dann

Get Device Info failed for 802268D4FFE5C5601E347444D0A04B8B1F0646F2 - TypeError: res.subarray is not a function

und danach wieder im 10 Sekunden abstand die Meldung

connect EHOSTUNREACH IP-Adresse Steckdose

tombox

@saarlanduhu

Ein adapter Neustart wird immer notwendig sein wenn eine Verbindung neu aufgebaut werden soll nach 3 Fehlversuchen

Walter White

@tombox said in Test Adapter TP-Link Tapo:

@saarlanduhu bitte überprüfen ob sich die GitHub version anders verhält

Wie bekomme ich die denn, bei mir gibt es nur 0.2.0 welche veraltet ist bzw wo Steckdosen nicht gehen.

ra juha

@walter-white Tom hat wohl an der 0.2.0 was geändert. Betrifft aber wohl nur p100. Bei meinen Problemen leider noch keine Verbesserung. Änderungen am Status nicht ersichtlich.
Denke aber er ist dran.

Gruss aus Böblingen

metaxa

Ich habe hier vor mir eine neue C520WS Camera, komme mit dem Tapo Adapter nicht wirklich auf gleich. Schreibt mir das LOG mit Fehlermeldungen voll und die Instanz wird wieder rot.

Eine Mail mit einem FMA Code habe ich nicht bekommen, die Mail wegen Anmeldung von einem iOS/ioBroker jedoch schon. Im Log steht auch nix von einem FMA Code.

Die Kamera wurde offensichtlich einmal gefunden, da etliche Datenpunkte angelegt wurden. Leider gibt es keinen DP "move to position" oder so etwas, gefühlt kann ich keinen einzigen DP steuern.

In diesem Thread lese ich immmer etwas von diesem HomeAssistent. Dann könnte ich mit dem HomeAssistent Adapter die Kamera über iO steuern. VIS bediene ich über Motioneye, ich bräuchte nur die Schwenkfunktion bzw. das aktive Anfahren gespeicherter Positionen.

Weiß jemand ob sich die Kamera im HomeAssistent einbinden und steuern läßt?

LG, mxa

tombox

@metaxa Genaue Logs wären gut und du kannst auch den onvis adapter probieren

metaxa

@tombox sagte in Test Adapter TP-Link Tapo:

Genaue Logs wären gut

Sehr gerne, ich suche sie raus! Bitte mein Post ist keine Kritik an deinem Adapter, ich hatte nur die Hoffnung .......

Walter White

@tombox Werden die Steckdosen ohne diesen fix nicht mehr laufen?
Screenshot_2024-01-09-23-18-09-950_com.android.chrome-edit.jpg
Gibt es kein Plan b auf GitHub wenn jemand plötzlich nicht mehr ist?

metaxa

@tombox sagte in Test Adapter TP-Link Tapo:

@metaxa Genaue Logs wären gut und du kannst auch den onvis adapter probieren

Hier das Log. Im ersen Anlauf mit dem freigegebenen Konto der neuen CAM, dann die beiden IP Adressen der andern Cam´s manuell eingetragen (jeweils ein anderes freigegebenes Konto). Was mir noch fehlen würde, EIN freigegebenes Konto für alle Cams.

2024-01-08 18:56:28.919 - info: host.iOProduktiv instance system.adapter.tapo.0 started with pid 113047
2024-01-08 18:56:29.913 - info: tapo.0 (113047) starting. Version 0.2.0 (non-npm: TA2k/ioBroker.tapo#f22d791b9b422d6fd3abe8a2f9f7382a7988c965) in /opt/iobroker/node_modules/iobroker.tapo, node: v18.18.2, js-controller: 5.0.17
2024-01-08 18:56:29.927 - error: tapo.0 (113047) Please set username and password in the instance settings
2024-01-08 19:02:30.919 - info: host.iOProduktiv stopInstance system.adapter.tapo.0 (force=false, process=true)
2024-01-08 19:02:30.921 - info: tapo.0 (113047) Got terminate signal TERMINATE_YOURSELF
2024-01-08 19:02:30.922 - info: tapo.0 (113047) terminating
2024-01-08 19:02:30.922 - info: tapo.0 (113047) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-08 19:02:30.993 - info: host.iOProduktiv stopInstance system.adapter.tapo.0 send kill signal
2024-01-08 19:02:31.423 - info: tapo.0 (113047) terminating
2024-01-08 19:02:31.520 - info: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-01-08 19:02:34.099 - info: host.iOProduktiv instance system.adapter.tapo.0 started with pid 128175
2024-01-08 19:02:35.050 - info: tapo.0 (128175) starting. Version 0.2.0 (non-npm: TA2k/ioBroker.tapo#f22d791b9b422d6fd3abe8a2f9f7382a7988c965) in /opt/iobroker/node_modules/iobroker.tapo, node: v18.18.2, js-controller: 5.0.17
2024-01-08 19:02:35.123 - info: tapo.0 (128175) Login tp TAPO App
2024-01-08 19:02:35.504 - info: tapo.0 (128175) Login succesfull
2024-01-08 19:02:35.740 - info: tapo.0 (128175) Found 3 devices
2024-01-08 19:02:36.239 - error: tapo.0 (128175) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:02:36.245 - warn: tapo.0 (128175) No IP found for 8021CDA220ADD1EE6A8E7E7D0F7DFE861E649CA0 put the device online or set the ip state manually
2024-01-08 19:02:36.488 - info: tapo.0 (128175) Init device 80219D887A52D32D03212C4C2DE37E4D21EC8028 type C520WS 1.0 with ip 192.168.0.220
2024-01-08 19:02:36.631 - info: tapo.0 (128175) 80219D887A52D32D03212C4C2DE37E4D21EC8028 Received device info {"manufacturer":"tp-link","model":"Tapo C520WS","firmwareVersion":"1.1.4 Build 230922 Rel.57957n","serialNumber":"31d87f97","hardwareId":1}
2024-01-08 19:02:36.700 - info: tapo.0 (128175) Initialized 80219D887A52D32D03212C4C2DE37E4D21EC8028
2024-01-08 19:02:37.151 - error: tapo.0 (128175) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:02:37.203 - warn: tapo.0 (128175) No IP found for 8021314EFB57E17626EC16DBDB2A31A51E64292E put the device online or set the ip state manually
2024-01-08 19:02:37.257 - info: tapo.0 (128175) Wait for connections
2024-01-08 19:02:47.318 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:02:57.321 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:03:07.321 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:03:17.322 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:03:27.322 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:03:37.322 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:03:47.322 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:03:57.323 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:04:07.323 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:04:17.323 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:04:27.324 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:04:37.324 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:04:47.323 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:04:57.323 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:05:17.323 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:05:27.324 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:05:37.324 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:05:47.326 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:05:57.326 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:06:07.326 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:06:17.325 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:06:27.325 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:06:37.325 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:06:47.326 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:06:57.328 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:07:07.329 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:07:17.330 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:07:27.330 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:07:37.330 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:07:47.332 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:07:57.332 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:08:07.334 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:08:17.334 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:08:27.335 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:08:37.336 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:08:47.337 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:08:57.339 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:09:07.340 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:09:17.340 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:09:27.341 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:09:37.342 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:09:47.343 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:09:57.345 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:10:07.345 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:10:17.347 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:10:27.347 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:10:37.348 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:10:47.348 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:10:57.349 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:11:07.351 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:11:17.351 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:11:20.962 - error: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:11:27.351 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:11:30.895 - error: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:11:37.353 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:11:42.277 - error: tapo.0 (128175) Device 80219D887A52D32D03212C4C2DE37E4D21EC8028 has no command refresh
2024-01-08 19:11:47.353 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:11:52.485 - error: tapo.0 (128175) Device 80219D887A52D32D03212C4C2DE37E4D21EC8028 has no command refresh
2024-01-08 19:11:57.355 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:12:07.355 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:12:17.356 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:12:27.357 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:12:37.358 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:12:42.876 - error: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:12:47.359 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:12:52.128 - error: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:12:57.361 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:13:07.361 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:13:17.363 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:13:27.363 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:13:37.363 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:13:47.363 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:13:57.364 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:14:07.364 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:14:17.365 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:14:27.365 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:14:37.365 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:14:47.367 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:14:57.368 - warn: tapo.0 (128175) Error: Unknown password encryption method
2024-01-08 19:22:40.707 - error: tapo.0 (176846) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:22:40.709 - warn: tapo.0 (176846) No IP found for 8021CDA220ADD1EE6A8E7E7D0F7DFE861E649CA0 put the device online or set the ip state manually
2024-01-08 19:22:40.941 - info: tapo.0 (176846) Init device 80219D887A52D32D03212C4C2DE37E4D21EC8028 type C520WS 1.0 with ip 192.168.0.220
2024-01-08 19:22:41.072 - info: tapo.0 (176846) 80219D887A52D32D03212C4C2DE37E4D21EC8028 Received device info {"manufacturer":"tp-link","model":"Tapo C520WS","firmwareVersion":"1.1.4 Build 230922 Rel.57957n","serialNumber":"31d87f97","hardwareId":1}
2024-01-08 19:22:41.076 - info: tapo.0 (176846) Initialized 80219D887A52D32D03212C4C2DE37E4D21EC8028
2024-01-08 19:22:41.153 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:22:41.503 - error: tapo.0 (176846) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:22:41.508 - warn: tapo.0 (176846) No IP found for 8021314EFB57E17626EC16DBDB2A31A51E64292E put the device online or set the ip state manually
2024-01-08 19:22:41.688 - info: tapo.0 (176846) Wait for connections
2024-01-08 19:22:41.802 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:22:42.980 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:22:43.998 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:22:45.380 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:22:48.993 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:22:49.182 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:22:50.216 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:22:50.380 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:22:51.773 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:22:51.993 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:22:53.384 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:22:55.223 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:22:56.578 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:00.218 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:00.980 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:01.774 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:23:02.748 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:11.738 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:11.774 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:23:15.214 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:17.381 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:19.216 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:19.736 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:21.774 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:23:25.396 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:26.181 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:27.398 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:31.774 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:23:35.578 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:38.753 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:38.979 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:41.773 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:23:44.927 - info: admin.0 (631) ==> Connected system.user.admin from ::ffff:192.168.0.132
2024-01-08 19:23:46.406 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:49.580 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:51.774 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:23:52.004 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:23:55.380 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:23:56.766 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:24:00.577 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:24:01.775 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:24:02.998 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:24:04.736 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:24:05.993 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:24:06.379 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:24:09.747 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:24:10.582 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:24:11.775 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:24:12.393 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:24:13.180 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:24:15.754 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:24:18.382 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:24:19.747 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:24:19.979 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" true
2024-01-08 19:24:21.774 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:24:25.018 - info: tapo.0 (176846) [C520WS 1.0] "Motion detected" false
2024-01-08 19:24:31.775 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:24:41.775 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:24:51.775 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:45:11.851 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:45:21.851 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:45:31.852 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:45:41.854 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:45:51.856 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:46:01.856 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:46:11.858 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:46:21.859 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:46:31.859 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:46:41.860 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:46:51.861 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:47:01.862 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:47:11.864 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:47:21.864 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:47:31.865 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:47:41.866 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:47:51.867 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:48:01.868 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:48:11.869 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:48:21.869 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:48:31.871 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:48:41.872 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:48:51.873 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:49:01.874 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:49:11.875 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:49:21.876 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:49:31.876 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:49:41.877 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:49:51.877 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:50:01.878 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:50:11.879 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:50:21.879 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:50:31.879 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:50:41.881 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:50:51.880 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:51:01.881 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:51:11.882 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:51:21.882 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:51:31.884 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:51:41.884 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:51:51.884 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:52:01.885 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:52:11.886 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:52:21.887 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:52:31.888 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:52:41.888 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:52:51.889 - warn: tapo.0 (176846) Error: Unknown password encryption method
2024-01-08 19:52:56.427 - info: host.iOProduktiv stopInstance system.adapter.tapo.0 (force=false, process=true)
2024-01-08 19:52:56.430 - info: tapo.0 (176846) Got terminate signal TERMINATE_YOURSELF
2024-01-08 19:52:56.430 - info: tapo.0 (176846) terminating
2024-01-08 19:52:56.431 - info: tapo.0 (176846) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-08 19:52:56.497 - info: host.iOProduktiv stopInstance system.adapter.tapo.0 send kill signal
2024-01-08 19:52:56.932 - info: tapo.0 (176846) terminating
2024-01-08 19:52:57.033 - info: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-01-08 19:52:59.598 - info: host.iOProduktiv instance system.adapter.tapo.0 started with pid 250673
2024-01-08 19:53:00.507 - info: tapo.0 (250673) starting. Version 0.2.0 (non-npm: TA2k/ioBroker.tapo#f22d791b9b422d6fd3abe8a2f9f7382a7988c965) in /opt/iobroker/node_modules/iobroker.tapo, node: v18.18.2, js-controller: 5.0.17
2024-01-08 19:53:00.531 - info: tapo.0 (250673) Login tp TAPO App
2024-01-08 19:53:01.060 - info: tapo.0 (250673) Login succesfull
2024-01-08 19:53:01.274 - info: tapo.0 (250673) Found 3 devices
2024-01-08 19:53:01.686 - error: tapo.0 (250673) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:53:01.687 - info: tapo.0 (250673) Init device 8021CDA220ADD1EE6A8E7E7D0F7DFE861E649CA0 type C310 with ip
192.168.0.110
2024-01-08 19:53:01.716 - error: tapo.0 (250673) uncaught exception: Invalid character in header content ["Host"]
2024-01-08 19:53:01.716 - error: tapo.0 (250673) TypeError: Invalid character in header content ["Host"]
at ClientRequest.setHeader (node:_http_outgoing:651:3)
at new ClientRequest (node:_http_client:311:12)
at Object.request (node:http:100:10)
at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
at Parser.emit (node:events:517:28)
at Parser.emit (node:domain:489:12)
at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26)
2024-01-08 19:53:01.716 - error: tapo.0 (250673) Exception-Code: ERR_INVALID_CHAR: Invalid character in header content ["Host"]
2024-01-08 19:53:01.723 - info: tapo.0 (250673) terminating
2024-01-08 19:53:01.723 - warn: tapo.0 (250673) Terminated (UNCAUGHT_EXCEPTION): Without reason
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: TypeError: Invalid character in header content ["Host"]
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at ClientRequest.setHeader (node:_http_outgoing:651:3)
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at new ClientRequest (node:_http_client:311:12)
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at Object.request (node:http:100:10)
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:events:517:28)
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:domain:489:12)
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26) {
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: code: 'ERR_INVALID_CHAR'
2024-01-08 19:53:01.839 - error: host.iOProduktiv Caught by controller[0]: }
2024-01-08 19:53:01.839 - error: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2024-01-08 19:53:01.839 - info: host.iOProduktiv Restart adapter system.adapter.tapo.0 because enabled
2024-01-08 19:53:31.964 - info: host.iOProduktiv instance system.adapter.tapo.0 started with pid 251883
2024-01-08 19:53:32.871 - info: tapo.0 (251883) starting. Version 0.2.0 (non-npm: TA2k/ioBroker.tapo#f22d791b9b422d6fd3abe8a2f9f7382a7988c965) in /opt/iobroker/node_modules/iobroker.tapo, node: v18.18.2, js-controller: 5.0.17
2024-01-08 19:53:32.895 - info: tapo.0 (251883) Login tp TAPO App
2024-01-08 19:53:33.349 - info: tapo.0 (251883) Login succesfull
2024-01-08 19:53:33.548 - info: tapo.0 (251883) Found 3 devices
2024-01-08 19:53:33.944 - error: tapo.0 (251883) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:53:33.946 - info: tapo.0 (251883) Init device 8021CDA220ADD1EE6A8E7E7D0F7DFE861E649CA0 type C310 with ip
192.168.0.110
2024-01-08 19:53:33.975 - error: tapo.0 (251883) uncaught exception: Invalid character in header content ["Host"]
2024-01-08 19:53:33.975 - error: tapo.0 (251883) TypeError: Invalid character in header content ["Host"]
at ClientRequest.setHeader (node:_http_outgoing:651:3)
at new ClientRequest (node:_http_client:311:12)
at Object.request (node:http:100:10)
at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
at Parser.emit (node:events:517:28)
at Parser.emit (node:domain:489:12)
at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26)
2024-01-08 19:53:33.975 - error: tapo.0 (251883) Exception-Code: ERR_INVALID_CHAR: Invalid character in header content ["Host"]
2024-01-08 19:53:33.986 - info: tapo.0 (251883) terminating
2024-01-08 19:53:33.986 - warn: tapo.0 (251883) Terminated (UNCAUGHT_EXCEPTION): Without reason
2024-01-08 19:53:34.123 - error: host.iOProduktiv Caught by controller[0]: TypeError: Invalid character in header content ["Host"]
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at ClientRequest.setHeader (node:_http_outgoing:651:3)
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at new ClientRequest (node:_http_client:311:12)
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at Object.request (node:http:100:10)
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:events:517:28)
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:domain:489:12)
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26) {
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: code: 'ERR_INVALID_CHAR'
2024-01-08 19:53:34.124 - error: host.iOProduktiv Caught by controller[0]: }
2024-01-08 19:53:34.124 - error: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2024-01-08 19:53:34.124 - info: host.iOProduktiv Restart adapter system.adapter.tapo.0 because enabled
2024-01-08 19:54:04.286 - info: host.iOProduktiv instance system.adapter.tapo.0 started with pid 253103
2024-01-08 19:54:05.186 - info: tapo.0 (253103) starting. Version 0.2.0 (non-npm: TA2k/ioBroker.tapo#f22d791b9b422d6fd3abe8a2f9f7382a7988c965) in /opt/iobroker/node_modules/iobroker.tapo, node: v18.18.2, js-controller: 5.0.17
2024-01-08 19:54:05.208 - info: tapo.0 (253103) Login tp TAPO App
2024-01-08 19:54:05.685 - info: tapo.0 (253103) Login succesfull
2024-01-08 19:54:05.915 - info: tapo.0 (253103) Found 3 devices
2024-01-08 19:54:06.352 - error: tapo.0 (253103) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:54:06.354 - info: tapo.0 (253103) Init device 8021CDA220ADD1EE6A8E7E7D0F7DFE861E649CA0 type C310 with ip
192.168.0.110
2024-01-08 19:54:06.385 - error: tapo.0 (253103) uncaught exception: Invalid character in header content ["Host"]
2024-01-08 19:54:06.385 - error: tapo.0 (253103) TypeError: Invalid character in header content ["Host"]
at ClientRequest.setHeader (node:_http_outgoing:651:3)
at new ClientRequest (node:_http_client:311:12)
at Object.request (node:http:100:10)
at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
at Parser.emit (node:events:517:28)
at Parser.emit (node:domain:489:12)
at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26)
2024-01-08 19:54:06.385 - error: tapo.0 (253103) Exception-Code: ERR_INVALID_CHAR: Invalid character in header content ["Host"]
2024-01-08 19:54:06.394 - info: tapo.0 (253103) terminating
2024-01-08 19:54:06.394 - warn: tapo.0 (253103) Terminated (UNCAUGHT_EXCEPTION): Without reason
2024-01-08 19:54:06.514 - error: host.iOProduktiv Caught by controller[0]: TypeError: Invalid character in header content ["Host"]
2024-01-08 19:54:06.514 - error: host.iOProduktiv Caught by controller[0]: at ClientRequest.setHeader (node:_http_outgoing:651:3)
2024-01-08 19:54:06.514 - error: host.iOProduktiv Caught by controller[0]: at new ClientRequest (node:_http_client:311:12)
2024-01-08 19:54:06.514 - error: host.iOProduktiv Caught by controller[0]: at Object.request (node:http:100:10)
2024-01-08 19:54:06.514 - error: host.iOProduktiv Caught by controller[0]: at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
2024-01-08 19:54:06.514 - error: host.iOProduktiv Caught by controller[0]: at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
2024-01-08 19:54:06.514 - error: host.iOProduktiv Caught by controller[0]: at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
2024-01-08 19:54:06.515 - error: host.iOProduktiv Caught by controller[0]: at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
2024-01-08 19:54:06.515 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:events:517:28)
2024-01-08 19:54:06.515 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:domain:489:12)
2024-01-08 19:54:06.515 - error: host.iOProduktiv Caught by controller[0]: at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26) {
2024-01-08 19:54:06.515 - error: host.iOProduktiv Caught by controller[0]: code: 'ERR_INVALID_CHAR'
2024-01-08 19:54:06.515 - error: host.iOProduktiv Caught by controller[0]: }
2024-01-08 19:54:06.515 - error: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2024-01-08 19:54:06.515 - info: host.iOProduktiv Restart adapter system.adapter.tapo.0 because enabled
2024-01-08 19:54:36.621 - info: host.iOProduktiv instance system.adapter.tapo.0 started with pid 254814
2024-01-08 19:54:37.530 - info: tapo.0 (254814) starting. Version 0.2.0 (non-npm: TA2k/ioBroker.tapo#f22d791b9b422d6fd3abe8a2f9f7382a7988c965) in /opt/iobroker/node_modules/iobroker.tapo, node: v18.18.2, js-controller: 5.0.17
2024-01-08 19:54:37.554 - info: tapo.0 (254814) Login tp TAPO App
2024-01-08 19:54:38.140 - info: tapo.0 (254814) Login succesfull
2024-01-08 19:54:38.442 - info: tapo.0 (254814) Found 3 devices
2024-01-08 19:54:38.880 - error: tapo.0 (254814) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:54:38.882 - info: tapo.0 (254814) Init device 8021CDA220ADD1EE6A8E7E7D0F7DFE861E649CA0 type C310 with ip
192.168.0.110
2024-01-08 19:54:38.908 - error: tapo.0 (254814) uncaught exception: Invalid character in header content ["Host"]
2024-01-08 19:54:38.909 - error: tapo.0 (254814) TypeError: Invalid character in header content ["Host"]
at ClientRequest.setHeader (node:_http_outgoing:651:3)
at new ClientRequest (node:_http_client:311:12)
at Object.request (node:http:100:10)
at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
at Parser.emit (node:events:517:28)
at Parser.emit (node:domain:489:12)
at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26)
2024-01-08 19:54:38.909 - error: tapo.0 (254814) Exception-Code: ERR_INVALID_CHAR: Invalid character in header content ["Host"]
2024-01-08 19:54:38.916 - info: tapo.0 (254814) terminating
2024-01-08 19:54:38.916 - warn: tapo.0 (254814) Terminated (UNCAUGHT_EXCEPTION): Without reason
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: TypeError: Invalid character in header content ["Host"]
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at ClientRequest.setHeader (node:_http_outgoing:651:3)
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at new ClientRequest (node:_http_client:311:12)
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at Object.request (node:http:100:10)
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:events:517:28)
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:domain:489:12)
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26) {
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: code: 'ERR_INVALID_CHAR'
2024-01-08 19:54:39.037 - error: host.iOProduktiv Caught by controller[0]: }
2024-01-08 19:54:39.037 - error: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2024-01-08 19:54:39.037 - info: host.iOProduktiv Restart adapter system.adapter.tapo.0 because enabled
2024-01-08 19:55:00.023 - info: host.iOProduktiv instance system.adapter.ical.0 started with pid 255316
2024-01-08 19:55:09.150 - info: host.iOProduktiv instance system.adapter.tapo.0 started with pid 256045
2024-01-08 19:55:09.990 - info: tapo.0 (256045) starting. Version 0.2.0 (non-npm: TA2k/ioBroker.tapo#f22d791b9b422d6fd3abe8a2f9f7382a7988c965) in /opt/iobroker/node_modules/iobroker.tapo, node: v18.18.2, js-controller: 5.0.17
2024-01-08 19:55:10.015 - info: tapo.0 (256045) Login tp TAPO App
2024-01-08 19:55:10.501 - info: tapo.0 (256045) Login succesfull
2024-01-08 19:55:10.742 - info: tapo.0 (256045) Found 3 devices
2024-01-08 19:55:11.136 - error: tapo.0 (256045) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:55:11.137 - info: tapo.0 (256045) Init device 8021CDA220ADD1EE6A8E7E7D0F7DFE861E649CA0 type C310 with ip
192.168.0.110
2024-01-08 19:55:11.166 - error: tapo.0 (256045) uncaught exception: Invalid character in header content ["Host"]
2024-01-08 19:55:11.166 - error: tapo.0 (256045) TypeError: Invalid character in header content ["Host"]
at ClientRequest.setHeader (node:_http_outgoing:651:3)
at new ClientRequest (node:_http_client:311:12)
at Object.request (node:http:100:10)
at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
at Parser.emit (node:events:517:28)
at Parser.emit (node:domain:489:12)
at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26)
2024-01-08 19:55:11.166 - error: tapo.0 (256045) Exception-Code: ERR_INVALID_CHAR: Invalid character in header content ["Host"]
2024-01-08 19:55:11.174 - info: tapo.0 (256045) terminating
2024-01-08 19:55:11.174 - warn: tapo.0 (256045) Terminated (UNCAUGHT_EXCEPTION): Without reason
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: TypeError: Invalid character in header content ["Host"]
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at ClientRequest.setHeader (node:_http_outgoing:651:3)
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at new ClientRequest (node:_http_client:311:12)
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at Object.request (node:http:100:10)
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:events:517:28)
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:domain:489:12)
2024-01-08 19:55:11.303 - error: host.iOProduktiv Caught by controller[0]: at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26) {
2024-01-08 19:55:11.304 - error: host.iOProduktiv Caught by controller[0]: code: 'ERR_INVALID_CHAR'
2024-01-08 19:55:11.304 - error: host.iOProduktiv Caught by controller[0]: }
2024-01-08 19:55:11.304 - error: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2024-01-08 19:55:11.304 - info: host.iOProduktiv Restart adapter system.adapter.tapo.0 because enabled
2024-01-08 19:55:41.457 - info: host.iOProduktiv instance system.adapter.tapo.0 started with pid 257259
2024-01-08 19:55:42.245 - info: tapo.0 (257259) starting. Version 0.2.0 (non-npm: TA2k/ioBroker.tapo#f22d791b9b422d6fd3abe8a2f9f7382a7988c965) in /opt/iobroker/node_modules/iobroker.tapo, node: v18.18.2, js-controller: 5.0.17
2024-01-08 19:55:42.268 - info: tapo.0 (257259) Login tp TAPO App
2024-01-08 19:55:42.726 - info: tapo.0 (257259) Login succesfull
2024-01-08 19:55:42.944 - info: tapo.0 (257259) Found 3 devices
2024-01-08 19:55:43.394 - error: tapo.0 (257259) {"error_code":-20571,"msg":"Device is offline"}
2024-01-08 19:55:43.396 - info: tapo.0 (257259) Init device 8021CDA220ADD1EE6A8E7E7D0F7DFE861E649CA0 type C310 with ip
192.168.0.110
2024-01-08 19:55:43.424 - error: tapo.0 (257259) uncaught exception: Invalid character in header content ["Host"]
2024-01-08 19:55:43.425 - error: tapo.0 (257259) TypeError: Invalid character in header content ["Host"]
at ClientRequest.setHeader (node:_http_outgoing:651:3)
at new ClientRequest (node:_http_client:311:12)
at Object.request (node:http:100:10)
at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
at Parser.emit (node:events:517:28)
at Parser.emit (node:domain:489:12)
at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26)
2024-01-08 19:55:43.425 - error: tapo.0 (257259) Exception-Code: ERR_INVALID_CHAR: Invalid character in header content ["Host"]
2024-01-08 19:55:43.432 - info: tapo.0 (257259) terminating
2024-01-08 19:55:43.433 - warn: tapo.0 (257259) Terminated (UNCAUGHT_EXCEPTION): Without reason
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: TypeError: Invalid character in header content ["Host"]
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at ClientRequest.setHeader (node:_http_outgoing:651:3)
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at new ClientRequest (node:_http_client:311:12)
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at Object.request (node:http:100:10)
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at Object.wrappedMethod [as request] (/opt/iobroker/node_modules/@sentry/src/integrations/http.ts:283:1)
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at Cam._requestPart2 (/opt/iobroker/node_modules/onvif/lib/cam.js:276:20)
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at /opt/iobroker/node_modules/onvif/lib/cam.js:247:23
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at Parser. (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:308:18)
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:events:517:28)
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at Parser.emit (node:domain:489:12)
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: at SAXParser.onclosetag (/opt/iobroker/node_modules/onvif/node_modules/xml2js/lib/parser.js:266:26) {
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: code: 'ERR_INVALID_CHAR'
2024-01-08 19:55:43.556 - error: host.iOProduktiv Caught by controller[0]: }
2024-01-08 19:55:43.556 - error: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2024-01-08 19:55:43.556 - info: host.iOProduktiv Restart adapter system.adapter.tapo.0 because enabled
2024-01-08 19:55:48.775 - info: host.iOProduktiv "system.adapter.tapo.0" disabled
2024-01-08 19:56:14.442 - error: tapo.0 (258480) adapter disabled
2024-01-08 19:56:14.489 - warn: tapo.0 (258480) Terminated (NO_ADAPTER_CONFIG_FOUND): Without reason
2024-01-08 19:56:15.093 - error: host.iOProduktiv instance system.adapter.tapo.0 terminated with code 3 (NO_ADAPTER_CONFIG_FOUND)
2024-01-08 19:56:15.093 - info: host.iOProduktiv Do not restart adapter system.adapter.tapo.0 because disabled or deleted
2024-01-08 19:56:39.588 - info: admin.0 (631) <== Disconnect system.user.admin from ::ffff:192.168.0.132 admin
2024-01-08 19:56:40.869 - info: admin.0 (631) ==> Connected system.user.admin from ::ffff:192.168.0.132

Onvis schaue ich mir paralell einmal an, andernfalls schicke ich die Cam retour nach A......zonien.

Danke für deine Arbeit!!!!!

tombox

@walter-white Das ist korrekt ich habe keine Steckdosen kann es nicht implementieren muss also auf Homebridge warten
oder halt auf home Assistent wechseln

tombox

@metaxa Die C520WS 1.0 with ip 192.168.0.220 sieht gut au und erkennt sogar Bewegung aber die C310 ohne ip sorgt dafür das der adapter abstürzt

metaxa

Servus @tombox!

Ich habe danach die IP Adressen eingetragen, aber das brachte die Instanz zum permanenten Absturz.

Ohne eingetragenen IP Adressen für die beiden anderen Cam´s blieb die Instanz am Leben.

Welche DP bei der C520WS wären denn für "bewege dich zu Pos xx" zuständig?

tombox

@metaxa ein log von dem abstürzen wäre noch gut

tapo adapter unterstützt kein Ptz kontrolle
hier die Diskussion
https://github.com/kopiro/homebridge-tapo-camera/issues/55

onvif adapter kann gotoPreset für vordefinierte Presets

metaxa

@tombox sagte in Test Adapter TP-Link Tapo:

abstürzen wäre noch gut
tapo adapter unterstützt kein Ptz kontrolle

Sollte alles im zusammen geschnittenen Protokoll drinnen sein. Eventuell ist "abstürzen" mein falscher Ausdruck. Die Instanz wird grün, schreibt einen Haufen Fehlermeldungen und geht wieder auf rot. Das wiederholt sich paar mal. Ich habe ihn dann deaktiviert.

@tombox sagte in Test Adapter TP-Link Tapo:

onvif adapter kann gotoPreset für vordefinierte Presets

ok, danke! Dann versuche ich es mit dem onvif Adapter, ich brauche vom iO ja nur das PTZ.

tombox

@metaxa das Protokoll zeigt nur Fehler mit der c310 ohne ip . das ist in der GitHub version behoben

Walter White

@tombox das ist ärgerlich, denn es steht alles bereit für Merge, kann wegen wahrscheinlichen todesfall(?) nicht irgendein github Admin das Update freigeben?

ManiacKill

@walter-white

tapo.0
2024-01-10 17:10:42.070	info	Wait for connections
tapo.0
2024-01-10 17:10:41.919	info	Initialized 
tapo.0
2024-01-10 17:10:41.909	info	 Received device info {"manufacturer":"tp-link","model":"Tapo C225","firmwareVersion":"1.0.27 Build 231107 Rel.69776n","serialNumber":"a1eda66e","hardwareId":1}
tapo.0
2024-01-10 17:10:41.728	info	Init device  type C225 1.0 with ip 192.168.2.114
tapo.0
2024-01-10 17:10:41.476	info	Found 1 devices
tapo.0
2024-01-10 17:10:41.278	info	Login succesfull
tapo.0
2024-01-10 17:10:40.837	info	Login tp TAPO App

nach dem info Wait for connections kommt nix mehr ist das richtig ?

Danke

tombox

@walter-white wie schon geschrieben dieser PR wird schon in Homebridge eingesetzt und ist seit zwei Monaten in iobroker aber es nach dem letzten update von tp link funktioniert der auch nicht mehr

NEWS

Test Adapter TP-Link Tapo

Support us

424

32.4k

81.4k

1.3m