Zigbee Stick spinnt *gelöst*

Thomas Braun

@gluecksmann sagte in Zigbee Stick spinnt:

Und wie man ein Update extern sichert habe ich auch noch nicht raus...

Mit dem Backitup-Adapter...
Wie/wo machst du denn derzeitig Backups?

gluecksmann

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 14:33:41 up 21 min,  1 user,  load average: 0.61, 0.55, 0.54
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-12-28 14:33:41 CET
           Universal time: Thu 2023-12-28 13:33:41 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.9G        1.2G        6.2G        8.0M        551M        6.5G
Swap:           99M          0B         99M
Total:         8.0G        1.2G        6.3G

         7898 M total memory
         1162 M used memory
          292 M active memory
         1304 M inactive memory
         6185 M free memory
           99 M buffer memory
          451 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT            LOAD   ACTIVE SUB    DESCRIPTION
* lightdm.service loaded failed failed Light Display Manager

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   14G   15G  50% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  8.5M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M     0  790M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Dec 28 14:11:43 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:3D:9B:6E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Dec 28 14:11:44 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Dec 28 14:11:44 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Thu Dec 28 14:11:46 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
412M    /var/
118M    /var/lib
102M    /var/cache
90M     /var/cache/apt
89M     /var/log

Archived and active journals take up 8.0M in the file system.

/opt/iobroker/backups:
60M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
626M    /opt/iobroker/iobroker-data/
329M    /opt/iobroker/iobroker-data/files
143M    /opt/iobroker/iobroker-data/backup-objects
93M     /opt/iobroker/iobroker-data/sonosCache
67M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
22M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
12M     /opt/iobroker/iobroker-data/states.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee
npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T13_33_49_495Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.12.0
javascript:     7.1.6

npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee
npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T13_34_11_407Z-debug-0.log
Adapters from github:   2

Adapter State
  system.adapter.admin.0                  : admin                 : raspberrypi                              - disabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              - disabled
  system.adapter.awtrix-light.0           : awtrix-light          : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.ble.0                    : ble                   : raspberrypi                              -  enabled
  system.adapter.chromecast.0             : chromecast            : raspberrypi                              - disabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
  system.adapter.devices.0                : devices               : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi                              -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              -  enabled
+ system.adapter.govee.0                  : govee                 : raspberrypi                              -  enabled
+ system.adapter.gruenbeck.0              : gruenbeck             : raspberrypi                              -  enabled
  system.adapter.history.0                : history               : raspberrypi                              - disabled
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : raspberrypi                              - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              - disabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : raspberrypi                              - disabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.meross.0                 : meross                : raspberrypi                              -  enabled
+ system.adapter.mielecloudservice.0      : mielecloudservice     : raspberrypi                              -  enabled
+ system.adapter.musiccast.0              : musiccast             : raspberrypi                              -  enabled
+ system.adapter.net-tools.0              : net-tools             : raspberrypi                              -  enabled
+ system.adapter.netatmo.0                : netatmo               : raspberrypi                              -  enabled
+ system.adapter.philips-air.0            : philips-air           : raspberrypi                              -  enabled
+ system.adapter.philips-air.1            : philips-air           : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.pollenflug.0             : pollenflug            : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.shuttercontrol.0         : shuttercontrol        : raspberrypi                              - disabled
+ system.adapter.smartcontrol.0           : smartcontrol          : raspberrypi                              -  enabled
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sonos.0                  : sonos                 : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
+ system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              -  enabled
  system.adapter.vis-metro.0              : vis-metro             : raspberrypi                              -  enabled
  system.adapter.vis-players.0            : vis-players           : raspberrypi                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi                              -  enabled
  system.adapter.web.0                    : web                   : raspberrypi                              - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.zigbee.0                 : zigbee                : raspberrypi                              - disabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alexa2"       : 3.26.3   , installed 3.26.3
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "awtrix-light" : 0.10.0   , installed 0.10.0
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "ble"          : 0.13.4   , installed 0.13.4
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "daswetter"    : 3.1.11   , installed 3.1.11
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "fullybrowser" : 3.0.6    , installed 3.0.6
Adapter    "gruenbeck"    : 0.0.42   , installed 0.0.42
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hue"          : 3.10.1   , installed 3.10.1
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "mielecloudservice": 6.5.4, installed 6.5.4
Adapter    "mihome-vacuum": 4.1.0    , installed 4.1.0
Adapter    "musiccast"    : 1.1.3    , installed 1.1.3
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "philips-air"  : 1.0.3    , installed 1.0.3
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.6.1    , installed 6.6.1
Adapter    "shuttercontrol": 1.6.3   , installed 1.6.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartcontrol" : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "trashschedule": 2.3.0    , installed 2.3.0
Adapter    "tuya"         : 3.14.2   , installed 3.14.2
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 1.0.0    , installed 1.0.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.6.0, installed 3.6.0
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "ws"           : 2.5.8    , installed 2.5.8
Adapter    "zigbee"       : 1.8.25   , installed 1.8.25

Objects and States
Please stand by - This may take a while
Objects:        11295
States:         9341

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          18008      642/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          14831      363/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       20705      999/io.sonoff.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       18400      632/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       19317      632/iobroker.js-con
tcp6       0      0 :::22                   :::*                    LISTEN      0          18010      642/sshd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          14830      363/cupsd
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       21820      980/io.sonos.0
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       19741      1036/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       19742      1036/io.tuya.0
udp        0      0 0.0.0.0:37928           0.0.0.0:*                           1001       21652      911/io.philips-air.
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       21575      856/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          18449      631/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          16300      460/cups-browsed
udp        0      0 0.0.0.0:41100           0.0.0.0:*                           1001       24005      1320/io.musiccast.0
udp        0      0 0.0.0.0:60062           0.0.0.0:*                           108        17435      356/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        17433      356/avahi-daemon: r
udp        0    704 0.0.0.0:48886           0.0.0.0:*                           1001       21952      1017/io.philips-air
udp6       0      0 :::546                  :::*                                0          18466      631/dhcpcd
udp6       0      0 :::5353                 :::*                                108        17434      356/avahi-daemon: r
udp6       0      0 :::39823                :::*                                108        17436      356/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-12-28 14:32:13.730  - info: philips-air.0 (911) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string"
2023-12-28 14:32:13.748  - info: philips-air.0 (911) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string"
2023-12-28 14:32:13.754  - info: philips-air.0 (911) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string"
2023-12-28 14:32:13.769  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string"
2023-12-28 14:32:13.773  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 14:32:13.777  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 14:32:17.852  - info: philips-air.0 (911) State value to set for "philips-air.0.control.lightBrightness" has to be type "number" but received type "string"
2023-12-28 14:32:17.863  - info: philips-air.0 (911) State value to set for "philips-air.0.control.airQualityNotificationThreshold" has to be type "number" but received type "string"
2023-12-28 14:32:17.882  - info: philips-air.0 (911) State value to set for "philips-air.0.status.allergenIndex" has to be type "number" but received type "string"
2023-12-28 14:32:17.892  - info: philips-air.0 (911) State value to set for "philips-air.0.control.childLock" has to be type "boolean" but received type "string"
2023-12-28 14:32:17.963  - info: philips-air.0 (911) State value to set for "philips-air.0.device.uptime" has to be type "number" but received type "string"
2023-12-28 14:32:17.973  - info: philips-air.0 (911) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string"
2023-12-28 14:32:17.990  - info: philips-air.0 (911) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string"
2023-12-28 14:32:17.995  - info: philips-air.0 (911) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string"
2023-12-28 14:32:18.008  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string"
2023-12-28 14:32:18.014  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 14:32:18.019  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 14:32:18.029  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.
2023-12-28 14:32:48.028  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.
2023-12-28 14:33:18.030  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.
2023-12-28 14:33:26.429  - warn: sonoff.0 (999) Client [tasmota2] has invalid password or username
2023-12-28 14:33:48.030  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.
2023-12-28 14:34:18.030  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.
2023-12-28 14:34:48.031  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.
2023-12-28 14:35:00.035  - info: host.raspberrypi instance system.adapter.dwd.0 started with pid 6771

Thomas Braun

@gluecksmann

iob start admin

gluecksmann

@thomas-braun sagte in Zigbee Stick spinnt:

iob start admin

Scheint jetzt endlich geklappt zu haben... Backup extern... So eine Sicherung braucht ja nicht viel Platz,oder? Google Drive würde ja reichen...

gluecksmann

@thomas-braun

Könnte ich theoretisch einfach eine andere Speicherkarte nehmen um diesen "Versuch" zu starten? Speicherung sollte ja jetzt extren funktioniert haben...

Und...wäre es in diesem Zuge Sinnvoll gleich einen neuen Zigbee Stick zu installieren? Denke ich muss bei einem neuem Zigbee Stick auch alles neu anlernen?

amg_666

@gluecksmann sagte in Zigbee Stick spinnt:

So eine Sicherung braucht ja nicht viel Platz,oder?

Das ist aber eine sehr pauschale Frage und hängt natürlich vom Umfang der Sicherung ab.
Ich sichere z.B. über backitup adapter und das umfasst iobroker selbst, alle Skripte, Zigbee und die Historywerte (falls du history adapter nutzt). Und weils so schön ist auch noch homematic macht alles zusammen ca 450 MB pro Sicherung.

gluecksmann

@amg_666

An Histoy hab ich mich nich nicht dran getraut... Hab auch nur Iobriker... DAs eine Sicherung aus 3 Dateien besteht ist richtig?

gluecksmann

@gluecksmann

Jetzt wo es scheinbar wieder läuft, bin ich wieder an dem Punk das nach Aufruf des Zigbee Adapters die Fehlermeldug "You need save and run adapter before pairing!" kommt...bin also da wo ich angefangen habe...

amg_666

@gluecksmann Wieso besteht eine Sicherung aus 3 Dateien? Das hängt doch davon ab, was du im backup-Adapter ausgewählt hast.
Aber falls es dir weiterhilft: iobroker selbst braucht bei mir inkl aller Skripts und Zigbee nur 16 MB je Sicherung. Aber das hängt natürlich auch davon ab wieviele Adapter und wieviele und wie große Skripte.

reutli

@gluecksmann

und in den Einstellungen des Adapters steht beim COM-Port das Ergebnis aus

ls -la /dev/serial/by-id/

?

Zeige mal die Einstellungen des Adapters...

gluecksmann

@reutli sagte in Zigbee Stick spinnt:

ls -la /dev/serial/by-id/

pi@raspberrypi:~ $ ls -la /dev/serial/by-id/
insgesamt 0
drwxr-xr-x 2 root root 60 Dez 28 14:11 .
drwxr-xr-x 4 root root 80 Dez 28 14:11 ..
lrwxrwxrwx 1 root root 13 Dez 28 14:11 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 -> ../../ttyACM0
pi@raspberrypi:~ $

reutli

@gluecksmann sagte in Zigbee Stick spinnt:

@reutli sagte in Zigbee Stick spinnt:

ls -la /dev/serial/by-id/

pi@raspberrypi:~ $ ls -la /dev/serial/by-id/
insgesamt 0
drwxr-xr-x 2 root root 60 Dez 28 14:11 .
drwxr-xr-x 4 root root 80 Dez 28 14:11 ..
lrwxrwxrwx 1 root root 13 Dez 28 14:11 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 -> ../../ttyACM0
pi@raspberrypi:~ $

und wo ist

@reutli sagte in Zigbee Stick spinnt:

Zeige mal die Einstellungen des Adapters...

gluecksmann

@reutli

Welchen meinst denn jetzt? Zigbee oder den für die Datensicherung?

reutli

@gluecksmann

Einstellungen des ZigBee Adapters.
Backup bzw. Restore brauchst Du ja wohl nicht mehr wegen

@gluecksmann sagte in Zigbee Stick spinnt:

@gluecksmann
Jetzt wo es scheinbar wieder läuft...

gluecksmann

@reutli

Frank579

@gluecksmann welche Version vom Zigbee Adapter hast du denn jetzt drauf ?

gluecksmann

@frank579

wieder 1.8.25

Frank579 · wieder 1.8.25

@gluecksmann dann geh mal auf die 1.8.24 nicht das es nur noch daran liegt ..
Und bitte nochmal iob diag Komplett
Der Rest läuft wieder ?

reutli · wieder 1.8.25

@gluecksmann sagte in Zigbee Stick spinnt:

wieder 1.8.25

dann wieder zurück!
Bitte in diesem Zuge bzw. danach genau COM-Anschluss prüfen, hattest Du tatsächlich diese erweiterte PAN-ID und PAN-ID bisher auch?

gluecksmann · wieder 1.8.25

@reutli

Du, frag mich nicht... also aktiv habe ich nix geändert...ggf. hat das Update was verbogen?

Community Forum

NEWS

Zigbee Stick spinnt gelöst

Support us

728

32.4k

81.4k

1.3m