UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[reutli]

@gluecksmann

und in den Einstellungen des Adapters steht beim COM-Port das Ergebnis aus

ls -la /dev/serial/by-id/

?

Zeige mal die Einstellungen des Adapters...

[gluecksmann]

@reutli sagte in Zigbee Stick spinnt:

ls -la /dev/serial/by-id/

pi@raspberrypi:~ $ ls -la /dev/serial/by-id/
insgesamt 0
drwxr-xr-x 2 root root 60 Dez 28 14:11 .
drwxr-xr-x 4 root root 80 Dez 28 14:11 ..
lrwxrwxrwx 1 root root 13 Dez 28 14:11 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 -> ../../ttyACM0
pi@raspberrypi:~ $

[reutli]

@gluecksmann sagte in Zigbee Stick spinnt:

@reutli sagte in Zigbee Stick spinnt:

ls -la /dev/serial/by-id/

pi@raspberrypi:~ $ ls -la /dev/serial/by-id/
insgesamt 0
drwxr-xr-x 2 root root 60 Dez 28 14:11 .
drwxr-xr-x 4 root root 80 Dez 28 14:11 ..
lrwxrwxrwx 1 root root 13 Dez 28 14:11 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 -> ../../ttyACM0
pi@raspberrypi:~ $

und wo ist

@reutli sagte in Zigbee Stick spinnt:

Zeige mal die Einstellungen des Adapters...

[gluecksmann]

@reutli

Welchen meinst denn jetzt? Zigbee oder den für die Datensicherung?

[reutli]

@gluecksmann

Einstellungen des ZigBee Adapters.
Backup bzw. Restore brauchst Du ja wohl nicht mehr wegen

@gluecksmann sagte in Zigbee Stick spinnt:

@gluecksmann
Jetzt wo es scheinbar wieder läuft...

[gluecksmann]

@reutli

[Frank579]

@gluecksmann welche Version vom Zigbee Adapter hast du denn jetzt drauf ?

[gluecksmann]

@frank579

wieder 1.8.25 :-(

[Frank579]

@gluecksmann dann geh mal auf die 1.8.24 nicht das es nur noch daran liegt ..
Und bitte nochmal iob diag Komplett
Der Rest läuft wieder ?

[reutli]

@gluecksmann sagte in Zigbee Stick spinnt:

wieder 1.8.25

dann wieder zurück!
Bitte in diesem Zuge bzw. danach genau COM-Anschluss prüfen, hattest Du tatsächlich diese erweiterte PAN-ID und PAN-ID bisher auch?

[gluecksmann]

@reutli

Du, frag mich nicht... also aktiv habe ich nix geändert...ggf. hat das Update was verbogen?

[gluecksmann]

@frank579

pi@raspberrypi:~ $ iobroker upgrade zigbee@1.8.24

This downgrade of "zigbee" will remove the following changes:
==========================================================================
-> 1.8.25
zhc 16.x
corr group from exclude dialog
==========================================================================

Would you like to downgrade zigbee from @1.8.25 to @1.8.24 now? [(y)es, (n)o]: y
Update zigbee from @1.8.25 to @1.8.24
host.raspberrypi Adapter "system.adapter.zigbee.0" is stopped.
NPM version: 10.2.3
Installing iobroker.zigbee@1.8.24... (System call)

seitdem ruht der See...mal sehen ob da noch was passiert...

[gluecksmann]

@reutli

So, jetzt wieder die früherer Version drauf... aber kommt immer noch die Fehlermeldung wie ganz am Anfang... Einstellungen SInd...

```
code_text

[Frank579]

@gluecksmann jetzt nochmal komplett iob diag

[reutli]

@gluecksmann
davor auch mal reboot gemacht???

debug modus im Adapter aktivieren...
und dann den Adapter nochmals neustarten

und dann
@frank579 sagte in Zigbee Stick spinnt:

@gluecksmann jetzt nochmal komplett iob diag

[gluecksmann]

@frank579

*** BASE SYSTEM ***
  Static hostname: raspberrypi
        Icon name: computer
 Operating System: Raspbian GNU/Linux 10 (buster)
           Kernel: Linux 5.10.103-v7l+
     Architecture: arm

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
17:33:54 up  3:22,  1 user,  load average: 0.68, 3.79, 4.41
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
              Local time: Thu 2023-12-28 17:33:54 CET
          Universal time: Thu 2023-12-28 16:33:54 UTC
                RTC time: n/a
               Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
             NTP service: active
         RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
             total        used        free      shared  buff/cache   available
Mem:           7.9G        1.6G        4.9G        8.0M        1.5G        6.1G
Swap:           99M          0B         99M
Total:         8.0G        1.6G        5.0G

        7898 M total memory
        1554 M used memory
         300 M active memory
        2506 M inactive memory
        4885 M free memory
         184 M buffer memory
        1273 M swap cache
          99 M total swap
           0 M used swap
          99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

 UNIT            LOAD   ACTIVE SUB    DESCRIPTION
* lightdm.service loaded failed failed Light Display Manager

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   14G   15G  50% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  8.5M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M     0  790M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Dec 28 14:11:43 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:3D:9B:6E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Dec 28 14:11:44 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Dec 28 14:11:44 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Thu Dec 28 14:11:46 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems \(real ones only\):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
413M    /var/
118M    /var/lib
102M    /var/cache
91M     /var/log
90M     /var/cache/apt

Archived and active journals take up 8.0M in the file system.

/opt/iobroker/backups:
63M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
621M    /opt/iobroker/iobroker-data/
322M    /opt/iobroker/iobroker-data/files
143M    /opt/iobroker/iobroker-data/backup-objects
93M     /opt/iobroker/iobroker-data/sonosCache
67M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
30M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
12M     /opt/iobroker/iobroker-data/objects.json.migrated

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
 Installed: 18.19.0-1nodesource1
 Candidate: 18.19.0-1nodesource1
 Version table:
*** 18.19.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
       100 /var/lib/dpkg/status
    18.18.2-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.18.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.18.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.17.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.17.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.16.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.16.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.15.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.14.2-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.14.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.14.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.13.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.12.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.11.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.10.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.9.1-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.9.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.8.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.7.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.6.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.5.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.4.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.3.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.2.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.1.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    18.0.0-1nodesource1 1001
       500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
    10.24.0~dfsg-1~deb10u3 500
       500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T16_34_03_703Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.12.0
javascript:     7.1.6

npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T16_34_25_768Z-debug-0.log
Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
 system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              - disabled
 system.adapter.awtrix-light.0           : awtrix-light          : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.ble.0                    : ble                   : raspberrypi                              -  enabled
 system.adapter.chromecast.0             : chromecast            : raspberrypi                              - disabled
 system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
 system.adapter.devices.0                : devices               : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
 system.adapter.dwd.0                    : dwd                   : raspberrypi                              -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              -  enabled
+ system.adapter.govee.0                  : govee                 : raspberrypi                              -  enabled
+ system.adapter.gruenbeck.0              : gruenbeck             : raspberrypi                              -  enabled
 system.adapter.history.0                : history               : raspberrypi                              - disabled
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
 system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
 system.adapter.icons-mfd-png.0          : icons-mfd-png         : raspberrypi                              - disabled
 system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              - disabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.meross.0                 : meross                : raspberrypi                              -  enabled
+ system.adapter.mielecloudservice.0      : mielecloudservice     : raspberrypi                              -  enabled
+ system.adapter.musiccast.0              : musiccast             : raspberrypi                              -  enabled
+ system.adapter.net-tools.0              : net-tools             : raspberrypi                              -  enabled
+ system.adapter.netatmo.0                : netatmo               : raspberrypi                              -  enabled
+ system.adapter.philips-air.0            : philips-air           : raspberrypi                              -  enabled
+ system.adapter.philips-air.1            : philips-air           : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.pollenflug.0             : pollenflug            : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
 system.adapter.shuttercontrol.0         : shuttercontrol        : raspberrypi                              - disabled
+ system.adapter.smartcontrol.0           : smartcontrol          : raspberrypi                              -  enabled
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sonos.0                  : sonos                 : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
+ system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
 system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi                              -  enabled
 system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              -  enabled
 system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
 system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              -  enabled
 system.adapter.vis-metro.0              : vis-metro             : raspberrypi                              -  enabled
 system.adapter.vis-players.0            : vis-players           : raspberrypi                              -  enabled
 system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              -  enabled
 system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
 system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alexa2"       : 3.26.3   , installed 3.26.3
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "awtrix-light" : 0.10.0   , installed 0.10.0
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "ble"          : 0.13.4   , installed 0.13.4
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "daswetter"    : 3.1.11   , installed 3.1.11
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "fullybrowser" : 3.0.6    , installed 3.0.6
Adapter    "gruenbeck"    : 0.0.42   , installed 0.0.42
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hue"          : 3.10.1   , installed 3.10.1
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "mielecloudservice": 6.5.4, installed 6.5.4
Adapter    "mihome-vacuum": 4.1.0    , installed 4.1.0
Adapter    "musiccast"    : 1.1.3    , installed 1.1.3
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "philips-air"  : 1.0.3    , installed 1.0.3
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.6.1    , installed 6.6.1
Adapter    "shuttercontrol": 1.6.3   , installed 1.6.3
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartcontrol" : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "trashschedule": 2.3.0    , installed 2.3.0
Adapter    "tuya"         : 3.14.2   , installed 3.14.2
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 1.0.0    , installed 1.0.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.6.0, installed 3.6.0
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "ws"           : 2.5.8    , installed 2.5.8
Adapter    "zigbee"       : 1.8.25   , installed 1.8.24 [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        11296
States:         9373

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          18008      642/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          14831      363/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       20705      999/io.sonoff.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       18400      632/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       19317      632/iobroker.js-con
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       178386     15017/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       363390     9027/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          18010      642/sshd
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          14830      363/cupsd
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       21820      980/io.sonos.0
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       19741      1036/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       19742      1036/io.tuya.0
udp        0      0 0.0.0.0:37928           0.0.0.0:*                           1001       21652      911/io.philips-air.
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       21575      856/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          18449      631/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          16300      460/cups-browsed
udp        0      0 0.0.0.0:41100           0.0.0.0:*                           1001       24005      1320/io.musiccast.0
udp        0      0 0.0.0.0:60062           0.0.0.0:*                           108        17435      356/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        17433      356/avahi-daemon: r
udp        0      0 0.0.0.0:48886           0.0.0.0:*                           1001       21952      1017/io.philips-air
udp6       0      0 :::546                  :::*                                0          18466      631/dhcpcd
udp6       0      0 :::5353                 :::*                                108        17434      356/avahi-daemon: r
udp6       0      0 :::39823                :::*                                108        17436      356/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-12-28 17:33:48.594  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 17:33:48.644  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 17:33:52.420  - info: philips-air.0 (911) State value to set for "philips-air.0.control.lightBrightness" has to be type "number" but received type "string"
2023-12-28 17:33:52.429  - info: philips-air.0 (911) State value to set for "philips-air.0.control.airQualityNotificationThreshold" has to be type "number" but received type "string"
2023-12-28 17:33:52.481  - info: philips-air.0 (911) State value to set for "philips-air.0.status.allergenIndex" has to be type "number" but received type "string"
2023-12-28 17:33:52.493  - info: philips-air.0 (911) State value to set for "philips-air.0.control.childLock" has to be type "boolean" but received type "string"
2023-12-28 17:33:52.542  - info: philips-air.0 (911) State value to set for "philips-air.0.device.uptime" has to be type "number" but received type "string"
2023-12-28 17:33:52.600  - info: philips-air.0 (911) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string"
2023-12-28 17:33:52.618  - info: philips-air.0 (911) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string"
2023-12-28 17:33:52.625  - info: philips-air.0 (911) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string"
2023-12-28 17:33:52.640  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string"
2023-12-28 17:33:52.695  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 17:33:52.701  - info: philips-air.0 (911) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string"
2023-12-28 17:34:18.240  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.
2023-12-28 17:34:24.323  - warn: sonoff.0 (999) Client [tasmota2] has invalid password or username
2023-12-28 17:34:38.463  - warn: sonos.0 (980) State "sonos.0.root.192_168_2_145.queue_html" has no existing object, this might lead to an error in future versions
2023-12-28 17:34:38.598  - warn: sonos.0 (980) State "sonos.0.root.192_168_2_145.queue_html" has no existing object, this might lead to an error in future versions
2023-12-28 17:34:48.242  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.
2023-12-28 17:35:00.048  - info: host.raspberrypi instance system.adapter.dwd.0 started with pid 303
2023-12-28 17:35:04.662  - info: dwd.0 (303) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.19.0, js-controller: 5.0.17
2023-12-28 17:35:05.205  - info: web.0 (9027) ==> Connected system.user.admin from ::ffff:192.168.2.148
2023-12-28 17:35:07.075  - info: dwd.0 (303) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-12-28 17:35:07.617  - info: host.raspberrypi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-12-28 17:35:15.042  - info: web.0 (9027) ==> Connected system.user.admin from ::ffff:192.168.2.148
2023-12-28 17:35:18.242  - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds.

[Thomas Braun]

@gluecksmann

iobroker.govee

nochmal installieren.

[reutli]

@gluecksmann

reboot gemacht?
debug modus im Adapter aktiviert?
Adapter neu gestartet?

Wenn ja: zeigen
Wenn nein: machen und dann zeigen

Sonst kann hier wahrscheinlich keiner mehr weiter helfen...

[gluecksmann]

@thomas-braun

der ist aktuell nicht das Problem...glaub den werfe ich erst mal raus...

[gluecksmann]

@reutli

Reboot und Adapter neu starten kann ich... Debug Modus ist wo?