NEWS
Zigbee Instanz startet nicht mehr
ioBroker Allgemein
26
Beiträge
3
Kommentatoren
1.1k
Aufrufe
3
Watching
-
hast du dein linux system upgedated? Wenn ja, dann ist es sicherlich ein
udevproblem, da der stick nun nicht mehr über/dev/serial/by-id/zu finden ist.
Check das mal:
https://youtu.be/2Jsedi4IueE?si=1ar332ZvsQNzyJ7R -
@schmakus das scheint es zu sein aber ich komme mit der Anleitung nicht bis zum ende
Beim letzten schritt bekomme ich eine fehlermeldung, was läuft das falsch?
@tapdance sagte in Zigbee Instanz startet nicht mehr:
bekomme ich eine fehlermeldung
Welche? Keine Bildchen von Text. Kopier das als Text in Codetags eingebettet hier rein.
iob diagsagt?
-
@tapdance sagte in Zigbee Instanz startet nicht mehr:
bekomme ich eine fehlermeldung
Welche? Keine Bildchen von Text. Kopier das als Text in Codetags eingebettet hier rein.
iob diagsagt?
@thomas-braun wie kopiere ich den text aus der kommandozeile raus und hier rein?
Ich komme bei der videoanleitung so weit das er den neuen Quellpfad anzeigt. Allerdings wenn ich dann
sudo apt -t bullseye-backports install udev
eingebe kommt die Fehlermeldung
Reading package lists... Done
E: The value 'bullseye-backports' is invalid for APT::Default-Release as such a release is not available in the sources -
@thomas-braun wie kopiere ich den text aus der kommandozeile raus und hier rein?
Ich komme bei der videoanleitung so weit das er den neuen Quellpfad anzeigt. Allerdings wenn ich dann
sudo apt -t bullseye-backports install udev
eingebe kommt die Fehlermeldung
Reading package lists... Done
E: The value 'bullseye-backports' is invalid for APT::Default-Release as such a release is not available in the sources@tapdance sagte in Zigbee Instanz startet nicht mehr:
wie kopiere ich den text aus der kommandozeile raus und hier rein?
Wie jeglichen anderen Text auch?
Mit der Maus markieren,Strg-Cund im Forum einfügen.Wenn du da aber auf einen 32Bit 'Bullsyeye' unterwegs sein solltest:
Installier da den Nachfolger 'Bookworm' in der 64Bit-Version.Und was für eine Videoanleitung?
-
@tapdance sagte in Zigbee Instanz startet nicht mehr:
wie kopiere ich den text aus der kommandozeile raus und hier rein?
Wie jeglichen anderen Text auch?
Mit der Maus markieren,Strg-Cund im Forum einfügen.Wenn du da aber auf einen 32Bit 'Bullsyeye' unterwegs sein solltest:
Installier da den Nachfolger 'Bookworm' in der 64Bit-Version.Und was für eine Videoanleitung?
-
@thomas-braun die schmakus verlinkt hat
wo sehe ich das es ein 32 Bis system ist? Sorry vor jahren mal nach einer anleitung aufgesetzt, biun kein Linux mensch@tapdance sagte in Zigbee Instanz startet nicht mehr:
wo sehe ich das es ein 32 Bis system ist?
In der Ausgabe von
iob diagAber wenn es 'vor Jahren' aufgesetzt wurde ist es ein 32Bit-System. Das ist aber eine Sackgasse, installier es neu. (Wenn die Hardware es hergibt. RPi 3 kann aber 64Bit.)
-
Ist 64 Bit in dem Video wird auch auf den artikel
https://forum.iobroker.net/topic/65017/zigbee-conbee2-funktioniert-nach-update-nicht-mehr-udev
verwiesen aber da hänge ich ebenfalls beim letzten schritt.
-
@thomas-braun sagte in Zigbee Instanz startet nicht mehr:
iob diag
Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 449M /var/ 127M /var/cache 124M /var/lib 120M /var/cache/apt 99M /var/log Archived and active journals take up 96.0M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 355M /opt/iobroker/iobroker-data/ 255M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 70M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 23M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js 7.4M /opt/iobroker/iobroker-data/states.jsonl 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.312d98a8.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /home/iobroker/.diag.sh: line 277: nodejs: command not found /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wifilight.0 : wifilight : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 ioBroker-Repositories Aktuell : http://download.iobroker.net/sources-dist-latest.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Stable (default): http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alarm" : 3.4.0 , installed 3.3.13 [Updatable] Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "history" : 3.0.1 , installed 2.2.6 [Updatable] Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "synology" : 3.0.0 , installed 3.0.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 5305 States: 4677 *** OS-Repositories and Updates *** W: GPG error: http://deb.debian.org/debian bullseye-proposed-updates InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 0E98404D386FA1D9 NO_PUBKEY 6ED0E7B82643E131 E: The repository 'http://deb.debian.org/debian bullseye-proposed-updates InRelease' is not signed. Pending Updates: 148 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14823 538/cupsd tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 17006 540/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 17628 540/iobroker.js-con tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 20643 1547/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15543 578/sshd: /usr/sbin tcp 0 0 192.168.2.4:2001 0.0.0.0:* LISTEN 1001 18180 1470/io.hm-rpc.0 tcp 0 0 192.168.2.4:2010 0.0.0.0:* LISTEN 1001 19642 1495/io.hm-rpc.1 tcp6 0 0 :::8082 :::* LISTEN 1001 22353 2250/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 28225 2650/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1001 22979 1944/io.terminal.0 tcp6 0 0 :::35275 :::* LISTEN 1001 23436 2418/io.yahka.0 tcp6 0 0 ::1:631 :::* LISTEN 0 14822 538/cupsd tcp6 0 0 :::22 :::* LISTEN 0 15545 578/sshd: /usr/sbin udp 0 0 192.168.2.4:5353 0.0.0.0:* 1001 19248 1583/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1677 398/avahi-daemon: r udp 0 0 0.0.0.0:54757 0.0.0.0:* 1001 351092 22479/io.broadlink2 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 19717 1530/io.shelly.0 udp 0 0 0.0.0.0:57197 0.0.0.0:* 1001 377275 22479/io.broadlink2 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 1982 480/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16457 587/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 351089 22479/io.broadlink2 udp 0 0 0.0.0.0:35694 0.0.0.0:* 108 1679 398/avahi-daemon: r udp6 0 0 :::5353 :::* 108 1678 398/avahi-daemon: r udp6 0 0 :::546 :::* 0 17476 480/dhcpcd udp6 0 0 :::43833 :::* 108 1680 398/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-27 17:52:10.911 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:19.566 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:21.278 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:29.796 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:31.618 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:39.953 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:41.998 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:50.165 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:52.359 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:00.319 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:02.699 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:10.506 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:13.092 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:20.642 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:23.456 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:30.807 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:33.826 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:40.960 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:44.212 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:51.213 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:54.646 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:54:01.387 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:54:06.526 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:54:11.638 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:54:17.044 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details)============ Mark until here for C&P =============
iob diag has finished.
-
@thomas-braun sagte in Zigbee Instanz startet nicht mehr:
iob diag
Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 449M /var/ 127M /var/cache 124M /var/lib 120M /var/cache/apt 99M /var/log Archived and active journals take up 96.0M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 355M /opt/iobroker/iobroker-data/ 255M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 70M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 23M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js 7.4M /opt/iobroker/iobroker-data/states.jsonl 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.312d98a8.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /home/iobroker/.diag.sh: line 277: nodejs: command not found /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wifilight.0 : wifilight : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 ioBroker-Repositories Aktuell : http://download.iobroker.net/sources-dist-latest.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Stable (default): http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alarm" : 3.4.0 , installed 3.3.13 [Updatable] Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "history" : 3.0.1 , installed 2.2.6 [Updatable] Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "synology" : 3.0.0 , installed 3.0.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 5305 States: 4677 *** OS-Repositories and Updates *** W: GPG error: http://deb.debian.org/debian bullseye-proposed-updates InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 0E98404D386FA1D9 NO_PUBKEY 6ED0E7B82643E131 E: The repository 'http://deb.debian.org/debian bullseye-proposed-updates InRelease' is not signed. Pending Updates: 148 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14823 538/cupsd tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 17006 540/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 17628 540/iobroker.js-con tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 20643 1547/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15543 578/sshd: /usr/sbin tcp 0 0 192.168.2.4:2001 0.0.0.0:* LISTEN 1001 18180 1470/io.hm-rpc.0 tcp 0 0 192.168.2.4:2010 0.0.0.0:* LISTEN 1001 19642 1495/io.hm-rpc.1 tcp6 0 0 :::8082 :::* LISTEN 1001 22353 2250/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 28225 2650/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1001 22979 1944/io.terminal.0 tcp6 0 0 :::35275 :::* LISTEN 1001 23436 2418/io.yahka.0 tcp6 0 0 ::1:631 :::* LISTEN 0 14822 538/cupsd tcp6 0 0 :::22 :::* LISTEN 0 15545 578/sshd: /usr/sbin udp 0 0 192.168.2.4:5353 0.0.0.0:* 1001 19248 1583/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1677 398/avahi-daemon: r udp 0 0 0.0.0.0:54757 0.0.0.0:* 1001 351092 22479/io.broadlink2 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 19717 1530/io.shelly.0 udp 0 0 0.0.0.0:57197 0.0.0.0:* 1001 377275 22479/io.broadlink2 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 1982 480/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16457 587/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 351089 22479/io.broadlink2 udp 0 0 0.0.0.0:35694 0.0.0.0:* 108 1679 398/avahi-daemon: r udp6 0 0 :::5353 :::* 108 1678 398/avahi-daemon: r udp6 0 0 :::546 :::* 0 17476 480/dhcpcd udp6 0 0 :::43833 :::* 108 1680 398/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-27 17:52:10.911 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:19.566 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:21.278 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:29.796 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:31.618 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:39.953 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:41.998 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:50.165 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:52:52.359 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:00.319 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:02.699 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:10.506 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:13.092 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:20.642 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:23.456 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:30.807 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:33.826 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:40.960 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:44.212 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:51.213 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:53:54.646 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:54:01.387 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:54:06.526 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:54:11.638 - warn: shelly.0 (1530) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-27 17:54:17.044 - warn: shelly.0 (1530) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details)============ Mark until here for C&P =============
iob diag has finished.
Da fehlt der erste Teil.
Ist aber eine 32bit-Installation. Bring das in die Gegenwart -> 64Bit Debian 12 'Bookworm' neuinstallieren.
-
Da fehlt der erste Teil.
Ist aber eine 32bit-Installation. Bring das in die Gegenwart -> 64Bit Debian 12 'Bookworm' neuinstallieren.
@thomas-braun aber das steht doch
Architecture: arm64
Gibt es für die installation 64Bit Debian 12 'Bookworm' eine Anleitung?
Muss ich das systems dann komplett neu aufsetzen und eine Sicherung einspielen? -
@thomas-braun aber das steht doch
Architecture: arm64
Gibt es für die installation 64Bit Debian 12 'Bookworm' eine Anleitung?
Muss ich das systems dann komplett neu aufsetzen und eine Sicherung einspielen?@tapdance ich hatte das so verstanden das folgendes mein Problem ist
pi@raspberrypi:/etc/apt/sources.list.d $ apt policy udev udev: Installed: 247.3-7+rpi1+deb11u2 Candidate: 247.3-7+rpi1+deb11u2 Version table: *** 247.3-7+rpi1+deb11u2 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status -
@tapdance ich hatte das so verstanden das folgendes mein Problem ist
pi@raspberrypi:/etc/apt/sources.list.d $ apt policy udev udev: Installed: 247.3-7+rpi1+deb11u2 Candidate: 247.3-7+rpi1+deb11u2 Version table: *** 247.3-7+rpi1+deb11u2 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status@tapdance sagte in Zigbee Instanz startet nicht mehr:
ich hatte das so verstanden das folgendes mein Problem ist
Ja. Da gibt es aber keine gescheite Lösung mehr für ein 32Bit-System. Backports würde ich da nicht einspielen.
Mach es neu:
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nichtDann Backup einspielen, fertig.
-
@tapdance sagte in Zigbee Instanz startet nicht mehr:
ich hatte das so verstanden das folgendes mein Problem ist
Ja. Da gibt es aber keine gescheite Lösung mehr für ein 32Bit-System. Backports würde ich da nicht einspielen.
Mach es neu:
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nichtDann Backup einspielen, fertig.
@thomas-braun ok dann versuche ich das mal
-
@tapdance sagte in Zigbee Instanz startet nicht mehr:
ich hatte das so verstanden das folgendes mein Problem ist
Ja. Da gibt es aber keine gescheite Lösung mehr für ein 32Bit-System. Backports würde ich da nicht einspielen.
Mach es neu:
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nichtDann Backup einspielen, fertig.
Hallo,
DANKE das neuaufsetzen hat geklappt. Nach der neuinstallation habe ich als erstes
sudo apt-mark hold udevgemacht damit das beschädigte packet garnbicht erst geladen wird dann alles andere aktualisiert und dann die sicherung zurückgespielt.
Zigbee stick funktioniert wieder leider habe ich jetzt ein anderes Problem. Meien Visualisierung läuft nicht mehr.
Deinstalieren und neu Instalieren habe ich schon versucht. Ich hoffe ihr könnt mir noch mal weiter helfen.
Hier das log
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 10:19:36 up 2 days, 15:24, 4 users, load average: 0.66, 0.99, 0.89 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-10-30 10:19:36 CET Universal time: Mon 2023-10-30 09:19:36 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** PI /home/PI PI adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 744M 15M 1.0G 1.6G Swap: 104M 0B 104M Total: 4.1G 2.4G 849M 3793 M total memory 2254 M used memory 2348 M active memory 397 M inactive memory 709 M free memory 51 M buffer memory 923 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 379M 1% /run /dev/mmcblk0p2 ext4 28G 6.2G 21G 24% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 380M 36K 380M 1% /run/user/1000 //192.168.2.3/all/SI-ioBrocker/Standard cifs 28T 23T 5.7T 80% /opt/iobroker/backups Messages concerning ext4 filesystem in dmesg: [Fri Oct 27 19:55:20 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:64:62:CC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9515910b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Oct 27 19:55:23 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 27 19:55:26 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/opt/iobroker/backups //192.168.2.3/all/SI-ioBrocker/Standard cifs rw,relatime,vers=1.0,cache=strict,username=Backup,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.2.3,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 510M /var/ 190M /var/lib 178M /var/cache 171M /var/cache/apt 130M /var/lib/apt/lists Archived and active journals take up 40.0M in the file system. /opt/iobroker/backups: 1001M /opt/iobroker/backups/ 0 /opt/iobroker/backups/redistmp /opt/iobroker/iobroker-data: 338M /opt/iobroker/iobroker-data/ 245M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 68M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 18M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.f22de4ab.chunk.js.map 6.5M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wifilight.0 : wifilight : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 ioBroker-Repositories Aktuell : http://download.iobroker.net/sources-dist-latest.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Stable (default): http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alarm" : 3.4.0 , installed 3.4.0 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "synology" : 3.0.0 , installed 3.0.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 5452 States: 4811 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 57223 14093/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14094 758/sshd: /usr/sbin tcp 0 0 192.168.2.4:2010 0.0.0.0:* LISTEN 1001 57088 13999/io.hm-rpc.1 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 51636 10767/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 52534 10767/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 1599726 115468/cupsd tcp6 0 0 :::8088 :::* LISTEN 1001 59576 14108/io.terminal.0 tcp6 0 0 :::8082 :::* LISTEN 1001 57281 14151/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 51722 10795/io.admin.0 tcp6 0 0 ::1:631 :::* LISTEN 0 1599725 115468/cupsd tcp6 0 0 :::22 :::* LISTEN 0 14096 758/sshd: /usr/sbin tcp6 0 0 :::35749 :::* LISTEN 1001 59641 14177/io.yahka.0 udp 0 0 192.168.2.4:5353 0.0.0.0:* 1001 60517 14127/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 14006 545/avahi-daemon: r udp 0 0 0.0.0.0:60882 0.0.0.0:* 1001 2089315 150158/io.broadlink udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 59651 14078/io.shelly.0 udp 0 0 0.0.0.0:36681 0.0.0.0:* 1001 2089391 150158/io.broadlink udp 0 0 0.0.0.0:55521 0.0.0.0:* 1001 673391 10818/io.backitup.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 1598109 115470/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 2089312 150158/io.broadlink udp 0 0 0.0.0.0:53948 0.0.0.0:* 104 14008 545/avahi-daemon: r udp6 0 0 :::5353 :::* 104 14007 545/avahi-daemon: r udp6 0 0 fe80::67d1:e1cb:7ef:546 :::* 0 18107 678/NetworkManager udp6 0 0 :::35810 :::* 104 14009 545/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-30 10:20:05.154 - info: broadlink2.0 (150158) discover [ '192.168.2.255', '255.255.255.255', '224.0.0.251' ] from 0.0.0.0:40677 2023-10-30 10:20:05.389 - info: broadlink2.0 (150158) Device RM:RMPRO-MOVE315-b1-1a-8d detected: address=192.168.2.169, mac=24:df:a7:b1:1a:8d, typ=RMP, id=0x27a9 devtype=RM3 Pro Plus 2023-10-30 10:20:10.388 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:10.389 - info: broadlink2.0 (150158) discover [ '192.168.2.169' ] from 0.0.0.0:42251 2023-10-30 10:20:11.457 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:13.157 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:14.619 - warn: broadlink2.0 (150158) device RM:Broadlink-RM2-aa-80-31 not found, please rescan later again or delete it! It was: 192.168.2.227,80,10002,智能遥控,0,[object Object],b4:43:0d:aa:80:31,RM,RM:Broadlink-RM2-aa-80-31,0x2712,RM2,Broadlink-RM2-aa-80-31,RM:Broadlink-RM2-aa-80-31,26 2023-10-30 10:20:14.620 - warn: broadlink2.0 (150158) device RM:RM4-14-80-2b not found, please rescan later again or delete it! It was: 192.168.2.203,80,25278,智能遥控,0,[object Object],a0:43:b0:14:80:2b,RM4,RM:RM4-14-80-2b,0x62be,RM4c,RM4-14-80-2b,RM:RM4-14-80-2b,52078 2023-10-30 10:20:15.036 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:15.037 - info: broadlink2.0 (150158) discover [ '192.168.2.227' ] from 0.0.0.0:51145 2023-10-30 10:20:17.248 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:17.250 - info: broadlink2.0 (150158) discover [ '192.168.2.203' ] from 0.0.0.0:36681 2023-10-30 10:20:19.465 - info: broadlink2.0 (150158) Poll every 30 secods. 2023-10-30 10:20:19.466 - info: broadlink2.0 (150158) broadlink2.0 started and found 1 devices named RM:RMPRO-MOVE315-b1-1a-8d 2023-10-30 10:20:19.466 - info: broadlink2.0 (150158) 2 were not found: RM:Broadlink-RM2-aa-80-31, RM:RM4-14-80-2b 2023-10-30 10:20:19.467 - info: broadlink2.0 (150158) found macs: 24:df:a7:b1:1a:8d 2023-10-30 10:20:21.804 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:23.373 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:32.337 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:33.546 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:42.798 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:43.742 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) ============ Mark until here for C&P ============= iob diag has finished.DANKE für die Unterstützung
-
Hallo,
DANKE das neuaufsetzen hat geklappt. Nach der neuinstallation habe ich als erstes
sudo apt-mark hold udevgemacht damit das beschädigte packet garnbicht erst geladen wird dann alles andere aktualisiert und dann die sicherung zurückgespielt.
Zigbee stick funktioniert wieder leider habe ich jetzt ein anderes Problem. Meien Visualisierung läuft nicht mehr.
Deinstalieren und neu Instalieren habe ich schon versucht. Ich hoffe ihr könnt mir noch mal weiter helfen.
Hier das log
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 10:19:36 up 2 days, 15:24, 4 users, load average: 0.66, 0.99, 0.89 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-10-30 10:19:36 CET Universal time: Mon 2023-10-30 09:19:36 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** PI /home/PI PI adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 744M 15M 1.0G 1.6G Swap: 104M 0B 104M Total: 4.1G 2.4G 849M 3793 M total memory 2254 M used memory 2348 M active memory 397 M inactive memory 709 M free memory 51 M buffer memory 923 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 379M 1% /run /dev/mmcblk0p2 ext4 28G 6.2G 21G 24% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 380M 36K 380M 1% /run/user/1000 //192.168.2.3/all/SI-ioBrocker/Standard cifs 28T 23T 5.7T 80% /opt/iobroker/backups Messages concerning ext4 filesystem in dmesg: [Fri Oct 27 19:55:20 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:64:62:CC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9515910b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Oct 27 19:55:23 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 27 19:55:26 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/opt/iobroker/backups //192.168.2.3/all/SI-ioBrocker/Standard cifs rw,relatime,vers=1.0,cache=strict,username=Backup,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.2.3,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 510M /var/ 190M /var/lib 178M /var/cache 171M /var/cache/apt 130M /var/lib/apt/lists Archived and active journals take up 40.0M in the file system. /opt/iobroker/backups: 1001M /opt/iobroker/backups/ 0 /opt/iobroker/backups/redistmp /opt/iobroker/iobroker-data: 338M /opt/iobroker/iobroker-data/ 245M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 68M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 18M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.f22de4ab.chunk.js.map 6.5M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wifilight.0 : wifilight : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 ioBroker-Repositories Aktuell : http://download.iobroker.net/sources-dist-latest.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Stable (default): http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alarm" : 3.4.0 , installed 3.4.0 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "synology" : 3.0.0 , installed 3.0.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 5452 States: 4811 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 57223 14093/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14094 758/sshd: /usr/sbin tcp 0 0 192.168.2.4:2010 0.0.0.0:* LISTEN 1001 57088 13999/io.hm-rpc.1 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 51636 10767/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 52534 10767/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 1599726 115468/cupsd tcp6 0 0 :::8088 :::* LISTEN 1001 59576 14108/io.terminal.0 tcp6 0 0 :::8082 :::* LISTEN 1001 57281 14151/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 51722 10795/io.admin.0 tcp6 0 0 ::1:631 :::* LISTEN 0 1599725 115468/cupsd tcp6 0 0 :::22 :::* LISTEN 0 14096 758/sshd: /usr/sbin tcp6 0 0 :::35749 :::* LISTEN 1001 59641 14177/io.yahka.0 udp 0 0 192.168.2.4:5353 0.0.0.0:* 1001 60517 14127/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 14006 545/avahi-daemon: r udp 0 0 0.0.0.0:60882 0.0.0.0:* 1001 2089315 150158/io.broadlink udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 59651 14078/io.shelly.0 udp 0 0 0.0.0.0:36681 0.0.0.0:* 1001 2089391 150158/io.broadlink udp 0 0 0.0.0.0:55521 0.0.0.0:* 1001 673391 10818/io.backitup.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 1598109 115470/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 2089312 150158/io.broadlink udp 0 0 0.0.0.0:53948 0.0.0.0:* 104 14008 545/avahi-daemon: r udp6 0 0 :::5353 :::* 104 14007 545/avahi-daemon: r udp6 0 0 fe80::67d1:e1cb:7ef:546 :::* 0 18107 678/NetworkManager udp6 0 0 :::35810 :::* 104 14009 545/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-30 10:20:05.154 - info: broadlink2.0 (150158) discover [ '192.168.2.255', '255.255.255.255', '224.0.0.251' ] from 0.0.0.0:40677 2023-10-30 10:20:05.389 - info: broadlink2.0 (150158) Device RM:RMPRO-MOVE315-b1-1a-8d detected: address=192.168.2.169, mac=24:df:a7:b1:1a:8d, typ=RMP, id=0x27a9 devtype=RM3 Pro Plus 2023-10-30 10:20:10.388 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:10.389 - info: broadlink2.0 (150158) discover [ '192.168.2.169' ] from 0.0.0.0:42251 2023-10-30 10:20:11.457 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:13.157 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:14.619 - warn: broadlink2.0 (150158) device RM:Broadlink-RM2-aa-80-31 not found, please rescan later again or delete it! It was: 192.168.2.227,80,10002,智能遥控,0,[object Object],b4:43:0d:aa:80:31,RM,RM:Broadlink-RM2-aa-80-31,0x2712,RM2,Broadlink-RM2-aa-80-31,RM:Broadlink-RM2-aa-80-31,26 2023-10-30 10:20:14.620 - warn: broadlink2.0 (150158) device RM:RM4-14-80-2b not found, please rescan later again or delete it! It was: 192.168.2.203,80,25278,智能遥控,0,[object Object],a0:43:b0:14:80:2b,RM4,RM:RM4-14-80-2b,0x62be,RM4c,RM4-14-80-2b,RM:RM4-14-80-2b,52078 2023-10-30 10:20:15.036 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:15.037 - info: broadlink2.0 (150158) discover [ '192.168.2.227' ] from 0.0.0.0:51145 2023-10-30 10:20:17.248 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:17.250 - info: broadlink2.0 (150158) discover [ '192.168.2.203' ] from 0.0.0.0:36681 2023-10-30 10:20:19.465 - info: broadlink2.0 (150158) Poll every 30 secods. 2023-10-30 10:20:19.466 - info: broadlink2.0 (150158) broadlink2.0 started and found 1 devices named RM:RMPRO-MOVE315-b1-1a-8d 2023-10-30 10:20:19.466 - info: broadlink2.0 (150158) 2 were not found: RM:Broadlink-RM2-aa-80-31, RM:RM4-14-80-2b 2023-10-30 10:20:19.467 - info: broadlink2.0 (150158) found macs: 24:df:a7:b1:1a:8d 2023-10-30 10:20:21.804 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:23.373 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:32.337 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:33.546 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:42.798 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:43.742 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) ============ Mark until here for C&P ============= iob diag has finished.DANKE für die Unterstützung
@tapdance sagte in Zigbee Instanz startet nicht mehr:
Nach der neuinstallation habe ich als erstes
sudo apt-mark hold udevgemacht
Nein, das Paket muss frei schwimmen, unter Bookworm ist der Fehler nicht mehr vorhanden und deswegen muss das Paket auch nicht auf hold gesetzt werden.
-
Hallo,
DANKE das neuaufsetzen hat geklappt. Nach der neuinstallation habe ich als erstes
sudo apt-mark hold udevgemacht damit das beschädigte packet garnbicht erst geladen wird dann alles andere aktualisiert und dann die sicherung zurückgespielt.
Zigbee stick funktioniert wieder leider habe ich jetzt ein anderes Problem. Meien Visualisierung läuft nicht mehr.
Deinstalieren und neu Instalieren habe ich schon versucht. Ich hoffe ihr könnt mir noch mal weiter helfen.
Hier das log
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 10:19:36 up 2 days, 15:24, 4 users, load average: 0.66, 0.99, 0.89 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-10-30 10:19:36 CET Universal time: Mon 2023-10-30 09:19:36 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** PI /home/PI PI adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 744M 15M 1.0G 1.6G Swap: 104M 0B 104M Total: 4.1G 2.4G 849M 3793 M total memory 2254 M used memory 2348 M active memory 397 M inactive memory 709 M free memory 51 M buffer memory 923 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 379M 1% /run /dev/mmcblk0p2 ext4 28G 6.2G 21G 24% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 380M 36K 380M 1% /run/user/1000 //192.168.2.3/all/SI-ioBrocker/Standard cifs 28T 23T 5.7T 80% /opt/iobroker/backups Messages concerning ext4 filesystem in dmesg: [Fri Oct 27 19:55:20 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:64:62:CC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9515910b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Oct 27 19:55:23 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 27 19:55:26 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/opt/iobroker/backups //192.168.2.3/all/SI-ioBrocker/Standard cifs rw,relatime,vers=1.0,cache=strict,username=Backup,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.2.3,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 510M /var/ 190M /var/lib 178M /var/cache 171M /var/cache/apt 130M /var/lib/apt/lists Archived and active journals take up 40.0M in the file system. /opt/iobroker/backups: 1001M /opt/iobroker/backups/ 0 /opt/iobroker/backups/redistmp /opt/iobroker/iobroker-data: 338M /opt/iobroker/iobroker-data/ 245M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 68M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 18M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.f22de4ab.chunk.js.map 6.5M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wifilight.0 : wifilight : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 ioBroker-Repositories Aktuell : http://download.iobroker.net/sources-dist-latest.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Stable (default): http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alarm" : 3.4.0 , installed 3.4.0 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "synology" : 3.0.0 , installed 3.0.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 5452 States: 4811 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 57223 14093/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14094 758/sshd: /usr/sbin tcp 0 0 192.168.2.4:2010 0.0.0.0:* LISTEN 1001 57088 13999/io.hm-rpc.1 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 51636 10767/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 52534 10767/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 1599726 115468/cupsd tcp6 0 0 :::8088 :::* LISTEN 1001 59576 14108/io.terminal.0 tcp6 0 0 :::8082 :::* LISTEN 1001 57281 14151/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 51722 10795/io.admin.0 tcp6 0 0 ::1:631 :::* LISTEN 0 1599725 115468/cupsd tcp6 0 0 :::22 :::* LISTEN 0 14096 758/sshd: /usr/sbin tcp6 0 0 :::35749 :::* LISTEN 1001 59641 14177/io.yahka.0 udp 0 0 192.168.2.4:5353 0.0.0.0:* 1001 60517 14127/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 14006 545/avahi-daemon: r udp 0 0 0.0.0.0:60882 0.0.0.0:* 1001 2089315 150158/io.broadlink udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 59651 14078/io.shelly.0 udp 0 0 0.0.0.0:36681 0.0.0.0:* 1001 2089391 150158/io.broadlink udp 0 0 0.0.0.0:55521 0.0.0.0:* 1001 673391 10818/io.backitup.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 1598109 115470/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 2089312 150158/io.broadlink udp 0 0 0.0.0.0:53948 0.0.0.0:* 104 14008 545/avahi-daemon: r udp6 0 0 :::5353 :::* 104 14007 545/avahi-daemon: r udp6 0 0 fe80::67d1:e1cb:7ef:546 :::* 0 18107 678/NetworkManager udp6 0 0 :::35810 :::* 104 14009 545/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-30 10:20:05.154 - info: broadlink2.0 (150158) discover [ '192.168.2.255', '255.255.255.255', '224.0.0.251' ] from 0.0.0.0:40677 2023-10-30 10:20:05.389 - info: broadlink2.0 (150158) Device RM:RMPRO-MOVE315-b1-1a-8d detected: address=192.168.2.169, mac=24:df:a7:b1:1a:8d, typ=RMP, id=0x27a9 devtype=RM3 Pro Plus 2023-10-30 10:20:10.388 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:10.389 - info: broadlink2.0 (150158) discover [ '192.168.2.169' ] from 0.0.0.0:42251 2023-10-30 10:20:11.457 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:13.157 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:14.619 - warn: broadlink2.0 (150158) device RM:Broadlink-RM2-aa-80-31 not found, please rescan later again or delete it! It was: 192.168.2.227,80,10002,智能遥控,0,[object Object],b4:43:0d:aa:80:31,RM,RM:Broadlink-RM2-aa-80-31,0x2712,RM2,Broadlink-RM2-aa-80-31,RM:Broadlink-RM2-aa-80-31,26 2023-10-30 10:20:14.620 - warn: broadlink2.0 (150158) device RM:RM4-14-80-2b not found, please rescan later again or delete it! It was: 192.168.2.203,80,25278,智能遥控,0,[object Object],a0:43:b0:14:80:2b,RM4,RM:RM4-14-80-2b,0x62be,RM4c,RM4-14-80-2b,RM:RM4-14-80-2b,52078 2023-10-30 10:20:15.036 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:15.037 - info: broadlink2.0 (150158) discover [ '192.168.2.227' ] from 0.0.0.0:51145 2023-10-30 10:20:17.248 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:17.250 - info: broadlink2.0 (150158) discover [ '192.168.2.203' ] from 0.0.0.0:36681 2023-10-30 10:20:19.465 - info: broadlink2.0 (150158) Poll every 30 secods. 2023-10-30 10:20:19.466 - info: broadlink2.0 (150158) broadlink2.0 started and found 1 devices named RM:RMPRO-MOVE315-b1-1a-8d 2023-10-30 10:20:19.466 - info: broadlink2.0 (150158) 2 were not found: RM:Broadlink-RM2-aa-80-31, RM:RM4-14-80-2b 2023-10-30 10:20:19.467 - info: broadlink2.0 (150158) found macs: 24:df:a7:b1:1a:8d 2023-10-30 10:20:21.804 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:23.373 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:32.337 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:33.546 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:42.798 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:43.742 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) ============ Mark until here for C&P ============= iob diag has finished.DANKE für die Unterstützung
Die Freigabe für die Backups würde ich nicht mit SMB V1 machen sondern mit der höchstmöglichen Variante.
-
Hallo,
DANKE das neuaufsetzen hat geklappt. Nach der neuinstallation habe ich als erstes
sudo apt-mark hold udevgemacht damit das beschädigte packet garnbicht erst geladen wird dann alles andere aktualisiert und dann die sicherung zurückgespielt.
Zigbee stick funktioniert wieder leider habe ich jetzt ein anderes Problem. Meien Visualisierung läuft nicht mehr.
Deinstalieren und neu Instalieren habe ich schon versucht. Ich hoffe ihr könnt mir noch mal weiter helfen.
Hier das log
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 10:19:36 up 2 days, 15:24, 4 users, load average: 0.66, 0.99, 0.89 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-10-30 10:19:36 CET Universal time: Mon 2023-10-30 09:19:36 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** PI /home/PI PI adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 744M 15M 1.0G 1.6G Swap: 104M 0B 104M Total: 4.1G 2.4G 849M 3793 M total memory 2254 M used memory 2348 M active memory 397 M inactive memory 709 M free memory 51 M buffer memory 923 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 379M 1% /run /dev/mmcblk0p2 ext4 28G 6.2G 21G 24% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 380M 36K 380M 1% /run/user/1000 //192.168.2.3/all/SI-ioBrocker/Standard cifs 28T 23T 5.7T 80% /opt/iobroker/backups Messages concerning ext4 filesystem in dmesg: [Fri Oct 27 19:55:20 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:64:62:CC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9515910b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Oct 27 19:55:23 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 27 19:55:26 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/opt/iobroker/backups //192.168.2.3/all/SI-ioBrocker/Standard cifs rw,relatime,vers=1.0,cache=strict,username=Backup,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.2.3,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 510M /var/ 190M /var/lib 178M /var/cache 171M /var/cache/apt 130M /var/lib/apt/lists Archived and active journals take up 40.0M in the file system. /opt/iobroker/backups: 1001M /opt/iobroker/backups/ 0 /opt/iobroker/backups/redistmp /opt/iobroker/iobroker-data: 338M /opt/iobroker/iobroker-data/ 245M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 68M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 18M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.f22de4ab.chunk.js.map 6.5M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - disabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wifilight.0 : wifilight : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 ioBroker-Repositories Aktuell : http://download.iobroker.net/sources-dist-latest.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Stable (default): http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alarm" : 3.4.0 , installed 3.4.0 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "synology" : 3.0.0 , installed 3.0.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 5452 States: 4811 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 57223 14093/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14094 758/sshd: /usr/sbin tcp 0 0 192.168.2.4:2010 0.0.0.0:* LISTEN 1001 57088 13999/io.hm-rpc.1 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 51636 10767/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 52534 10767/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 1599726 115468/cupsd tcp6 0 0 :::8088 :::* LISTEN 1001 59576 14108/io.terminal.0 tcp6 0 0 :::8082 :::* LISTEN 1001 57281 14151/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 51722 10795/io.admin.0 tcp6 0 0 ::1:631 :::* LISTEN 0 1599725 115468/cupsd tcp6 0 0 :::22 :::* LISTEN 0 14096 758/sshd: /usr/sbin tcp6 0 0 :::35749 :::* LISTEN 1001 59641 14177/io.yahka.0 udp 0 0 192.168.2.4:5353 0.0.0.0:* 1001 60517 14127/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 14006 545/avahi-daemon: r udp 0 0 0.0.0.0:60882 0.0.0.0:* 1001 2089315 150158/io.broadlink udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 59651 14078/io.shelly.0 udp 0 0 0.0.0.0:36681 0.0.0.0:* 1001 2089391 150158/io.broadlink udp 0 0 0.0.0.0:55521 0.0.0.0:* 1001 673391 10818/io.backitup.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 1598109 115470/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 2089312 150158/io.broadlink udp 0 0 0.0.0.0:53948 0.0.0.0:* 104 14008 545/avahi-daemon: r udp6 0 0 :::5353 :::* 104 14007 545/avahi-daemon: r udp6 0 0 fe80::67d1:e1cb:7ef:546 :::* 0 18107 678/NetworkManager udp6 0 0 :::35810 :::* 104 14009 545/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-30 10:20:05.154 - info: broadlink2.0 (150158) discover [ '192.168.2.255', '255.255.255.255', '224.0.0.251' ] from 0.0.0.0:40677 2023-10-30 10:20:05.389 - info: broadlink2.0 (150158) Device RM:RMPRO-MOVE315-b1-1a-8d detected: address=192.168.2.169, mac=24:df:a7:b1:1a:8d, typ=RMP, id=0x27a9 devtype=RM3 Pro Plus 2023-10-30 10:20:10.388 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:10.389 - info: broadlink2.0 (150158) discover [ '192.168.2.169' ] from 0.0.0.0:42251 2023-10-30 10:20:11.457 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:13.157 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:14.619 - warn: broadlink2.0 (150158) device RM:Broadlink-RM2-aa-80-31 not found, please rescan later again or delete it! It was: 192.168.2.227,80,10002,智能遥控,0,[object Object],b4:43:0d:aa:80:31,RM,RM:Broadlink-RM2-aa-80-31,0x2712,RM2,Broadlink-RM2-aa-80-31,RM:Broadlink-RM2-aa-80-31,26 2023-10-30 10:20:14.620 - warn: broadlink2.0 (150158) device RM:RM4-14-80-2b not found, please rescan later again or delete it! It was: 192.168.2.203,80,25278,智能遥控,0,[object Object],a0:43:b0:14:80:2b,RM4,RM:RM4-14-80-2b,0x62be,RM4c,RM4-14-80-2b,RM:RM4-14-80-2b,52078 2023-10-30 10:20:15.036 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:15.037 - info: broadlink2.0 (150158) discover [ '192.168.2.227' ] from 0.0.0.0:51145 2023-10-30 10:20:17.248 - info: broadlink2.0 (150158) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2023-10-30 10:20:17.250 - info: broadlink2.0 (150158) discover [ '192.168.2.203' ] from 0.0.0.0:36681 2023-10-30 10:20:19.465 - info: broadlink2.0 (150158) Poll every 30 secods. 2023-10-30 10:20:19.466 - info: broadlink2.0 (150158) broadlink2.0 started and found 1 devices named RM:RMPRO-MOVE315-b1-1a-8d 2023-10-30 10:20:19.466 - info: broadlink2.0 (150158) 2 were not found: RM:Broadlink-RM2-aa-80-31, RM:RM4-14-80-2b 2023-10-30 10:20:19.467 - info: broadlink2.0 (150158) found macs: 24:df:a7:b1:1a:8d 2023-10-30 10:20:21.804 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:23.373 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:32.337 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:33.546 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:42.798 - warn: shelly.0 (14078) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2023-10-30 10:20:43.742 - warn: shelly.0 (14078) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) ============ Mark until here for C&P ============= iob diag has finished.DANKE für die Unterstützung
@tapdance sagte in Zigbee Instanz startet nicht mehr:
Zigbee stick funktioniert wieder leider habe ich jetzt ein anderes Problem. Meien Visualisierung läuft nicht mehr.
Hast du vor dem Zurückspielen den Adapter Vis 'leer' angelegt?
-
@tapdance sagte in Zigbee Instanz startet nicht mehr:
Zigbee stick funktioniert wieder leider habe ich jetzt ein anderes Problem. Meien Visualisierung läuft nicht mehr.
Hast du vor dem Zurückspielen den Adapter Vis 'leer' angelegt?
821
Online32.4k
Benutzer81.6k
Themen1.3m
Beiträge