iobroker läuft wieder nicht...

? Offline

@pahan sagte in iobroker läuft wieder nicht...:

Also, die Updates erst nachdem grafana und influx gefixt sind oder ist das unabhängig voneinander?

Moin,

weil man nichts macht, kommen dann auch all die schönen kleinen Fehler mit der Zeit ;)

Du musst erst die Repositorys korrigieren, denn bei jedem apt update / upgrade läuft apt auf einen Fehler und bricht ab, somit kannst Du nichts aktuell halten.

VG
Bernd

Thomas Braun

@pahan sagte in iobroker läuft wieder nicht...:

also gefühlt ist das Ding dauerhaft überlastet

Ich vermute, da läuft dir ein Skript aus dem Ruder.
Schalt den ioBroker aus, wenn du da die Kernsanierung vornimmst.

Jan1

@pahan sagte in iobroker läuft wieder nicht...:

Es lief eben alles zu meiner Zufriedenheit, daher habe ich auch keine Updates gefahren...

und warum hast dann nun ein Problem, wenn das so toll war?
Genau wegen dieser doofen Einstellung der Systempflege gegenüber ;)

? Offline

@pahan sagte in iobroker läuft wieder nicht...:

jaaa, also gefühlt ist das Ding dauerhaft überlastet, aber ich weiß nicht mit was und wie ich es fixen soll

Moin,

dann musst Du mal in die Logs schauen, denn dazu sind die da :)
aus Deinem iob diag ganz am Ende

*** Log File - Last 25 Lines ***
2023-10-17 20:05:26.961  - warn: shelly.0 (15694) [authEnabled] 192.168.178.55 (shelly1 / shelly1-40F52000F535 / SHSW-1#40F52000F535#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 20:05:26.964  - warn: shelly.0 (15694) [authEnabled] 192.168.178.49 (shelly1 / shelly1-E098069629A1 / SHSW-1#E098069629A1#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 20:05:26.967  - warn: shelly.0 (15694) [authEnabled] 192.168.178.52 (shelly1 / shelly1-E09806963B80 / SHSW-1#E09806963B80#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 20:05:27.874  - warn: shelly.0 (15694) [authEnabled] 192.168.178.54 (shellyswitch25 / shellyswitch25-BCDDC277A135 / SHSW-25#BCDDC277A135#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 20:05:29.230  - info: upnp.0 (18760) starting. Version 1.0.21 in /opt/iobroker/node_modules/iobroker.upnp, node: v18.18.2, js-controller: 4.0.24
2023-10-17 20:05:29.366  - info: upnp.0 (18760) Auto discover: false
2023-10-17 20:05:30.716  - warn: influxdb.0 (15649) Error on writePoint("{"value":28416.64,"time":"2023-10-17T18:04:30.649Z","from":"system.adapter.binance.0","q":0,"ack":false}): Error: {"error":"timeout"}
 / "{\"error\":\"timeout\"}\n""
2023-10-17 20:05:30.716  - info: influxdb.0 (15649) Add point that had error for crypto.btc.usdt to buffer again, error-count=6
2023-10-17 20:05:30.817  - warn: influxdb.0 (15649) Error on writePoint("{"value":0.00005609,"time":"2023-10-17T18:03:30.804Z","from":"system.adapter.binance.0","q":0,"ack":false}): Error: {"error":"timeout"}
 / "{\"error\":\"timeout\"}\n""
2023-10-17 20:05:30.817  - info: influxdb.0 (15649) Add point that had error for crypto.trx.eth to buffer again, error-count=5
2023-10-17 20:05:30.966  - warn: influxdb.0 (15649) Error on writePoint("{"value":1567.09,"time":"2023-10-17T18:04:30.902Z","from":"system.adapter.binance.0","q":0,"ack":false}): Error: {"error":"timeout"}
 / "{\"error\":\"timeout\"}\n""
2023-10-17 20:05:30.967  - info: influxdb.0 (15649) Add point that had error for crypto.eth.usdt to buffer again, error-count=5
2023-10-17 20:05:33.026  - warn: shelly.0 (15694) [authEnabled] 192.168.178.55 (shelly1 / shelly1-40F52000F535 / SHSW-1#40F52000F535#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 20:05:33.131  - warn: shelly.0 (15694) [authEnabled] 192.168.178.52 (shelly1 / shelly1-E09806963B80 / SHSW-1#E09806963B80#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 20:05:33.432  - warn: shelly.0 (15694) [authEnabled] 192.168.178.54 (shellyswitch25 / shellyswitch25-BCDDC277A135 / SHSW-25#BCDDC277A135#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 20:05:33.666  - warn: shelly.0 (15694) [authEnabled] 192.168.178.49 (shelly1 / shelly1-E098069629A1 / SHSW-1#E098069629A1#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 20:05:35.455  - warn: influxdb.0 (15649) Error on writePoint("{"value":21.7,"time":"2023-10-17T18:01:51.323Z","from":"system.adapter.hm-rpc.1","q":0,"ack":true}): Error: {"error":"timeout"}
 / "{\"error\":\"timeout\"}\n""
2023-10-17 20:05:35.456  - info: influxdb.0 (15649) Add point that had error for temp.ist.gaeste.wc to buffer again, error-count=9
2023-10-17 20:05:35.469  - warn: influxdb.0 (15649) Error on writePoint("{"value":21.8,"time":"2023-10-17T18:04:45.240Z","from":"system.adapter.hm-rpc.1","q":0,"ack":true}): Error: {"error":"timeout"}
 / "{\"error\":\"timeout\"}\n""
2023-10-17 20:05:35.469  - info: influxdb.0 (15649) Discard point that had error for temp.ist.gaeste.wc, error-count=10

In /var/log/ gibt es noch mehr Log Files, da steht sicherlich auch einiges drin.
Dann kannst Du mal, das 'ne Zeitlang laufen lassen und schauen, wer da so unter den Top 10 ist

# top

VG
Bernd

P.S.: Sauberes Backup machen und gleich richtig neu aufsetzen, ist glaube ich der schmerzfreie Weg, ohne genau zu wissen, was da alles auf der Kiste werkelt.

Pahan

@thomas-braun sagte in iobroker läuft wieder nicht...:

@pahan

Dann die Antiquitäten-Sammlung auf Stand bringen:
iob update
iob upgrade all -y 
iob stop
iob fix
iob upgrade self
iob start

Habe nun grafana und influxdb aktualisiert und die von dir genannten Schritte durchgeführt. Hat sehr sehr lange gedauert und

iob diag

liefert nun folgendes:

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : armhf

Systemuptime and Load:
 23:20:02 up  9:25,  1 user,  load average: 8.90, 7.26, 8.08
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Tue 2023-10-17 23:20:03 CEST
           Universal time: Tue 2023-10-17 21:20:03 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi                                                                                iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.6G        534M        0.0K        1.6G        2.2G
Swap:            99M          0B         99M
Total:          3.9G        1.6G        634M

         3794 M total memory
         1646 M used memory
         1687 M active memory
         1214 M inactive memory
          533 M free memory
          240 M buffer memory
         1373 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   11G   18G  39% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  864K  759M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     380M   16K  380M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,short                                                                               name=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
4.1G    /var/
3.4G    /var/log
3.0G    /var/log/journal/9177676efac74b1994c74dac83b5d5f4
3.0G    /var/log/journal
378M    /var/cache

Archived and active journals take up 2.9G in the file system.

/opt/iobroker/backups:
81M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
502M    /opt/iobroker/iobroker-data/
286M    /opt/iobroker/iobroker-data/files
129M    /opt/iobroker/iobroker-data/backup-objects
52M     /opt/iobroker/iobroker-data/files/javascript.admin
49M     /opt/iobroker/iobroker-data/files/vis.0

The five largest files in iobroker-data are:
21M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
19M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map
17M     /opt/iobroker/iobroker-data/objects.json.migrated
17M     /opt/iobroker/iobroker-data/objects.json.broken

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links                                                                                'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.2
/usr/bin/node           v18.18.2
/usr/bin/npm            9.8.1
/usr/bin/npx            9.8.1
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 18.18.2-1nodesource1
  Candidate: 18.18.2-1nodesource1
  Version table:
 *** 18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.10.1
javascript:     7.1.4

Adapters from github:   2

Adapter State
  system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.binance.0                : binance               : raspberrypi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi                              -  enabled
+ system.adapter.email.0                  : email                 : raspberrypi                              -  enabled
  system.adapter.eusec.0                  : eusec                 : raspberrypi                              - disabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : raspberrypi                              -  enabled
+ system.adapter.fritzbox.0               : fritzbox              : raspberrypi                              -  enabled
  system.adapter.gartenbewaesserung.0     : gartenbewaesserung    : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : raspberrypi                              -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 18701
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 12001
+ system.adapter.hm-rpc.2                 : hm-rpc                : raspberrypi                              -  enabled, port: 12010
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.ical.1                   : ical                  : raspberrypi                              -  enabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : raspberrypi                              - disabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : raspberrypi                              - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              - disabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.logparser.0              : logparser             : raspberrypi                              -  enabled
  system.adapter.mercedesme.0             : mercedesme            : raspberrypi                              - disabled
  system.adapter.mihome-lamp.0            : mihome-lamp           : raspberrypi                              - disabled, port: 54321
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : raspberrypi                              - disabled, port: 54321
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.snmp.0                   : snmp                  : raspberrypi                              -  enabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              -  enabled
+ system.adapter.sprinklecontrol.0        : sprinklecontrol       : raspberrypi                              -  enabled
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5001
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
+ system.adapter.upnp.0                   : upnp                  : raspberrypi                              -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : raspberrypi                              - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              - disabled
  system.adapter.vis-plumb.0              : vis-plumb             : raspberrypi                              - disabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : raspberrypi                              - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi                              - disabled
  system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspberrypi                              -  enabled
  system.adapter.yeelight-2.0             : yeelight-2            : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings

ioBroker-Repositories
Server Cannot start inMem-states on port 9000: Failed to lock DB file "/opt/iobroker/iobroker-data/states.jsonl"!

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.10.1   , installed 6.10.1
Adapter    "alexa2"       : 3.25.2   , installed 3.25.2
Adapter    "backitup"     : 2.8.1    , installed 2.8.1
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 1.2.0    , installed 1.2.0
Adapter    "eusec"        : 1.1.2    , installed 1.1.2
Adapter    "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter    "fritzbox"     : 0.5.0    , installed 0.5.0
Adapter    "history"      : 2.2.6    , installed 2.2.6
Adapter    "hm-rega"      : 3.0.47   , installed 3.0.47
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 1.14.5   , installed 1.14.5
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "logparser"    : 2.2.0    , installed 2.2.0
Adapter    "mercedesme"   : 0.1.1    , installed 0.1.1
Adapter    "mihome-lamp"  : 1.1.0    , installed 1.1.0
Adapter    "mihome-vacuum": 4.0.0    , installed 4.0.0
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "snmp"         : 2.4.11   , installed 2.4.11
Adapter    "socketio"     : 6.5.5    , installed 6.5.5
Adapter    "sprinklecontrol": 0.2.13 , installed 0.2.13
Adapter    "synology"     : 3.0.0    , installed 3.0.0
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.96.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.6.0, installed 3.6.0
Adapter    "web"          : 6.1.2    , installed 6.1.2
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "ws"           : 2.5.5    , installed 2.5.5
Adapter    "yeelight-2"   : 1.2.1    , installed 1.2.1

Objects and States
Please stand by - This may take a while
Objects:        30179
States:         21095

*** OS-Repositories and Updates ***
E: The repository 'https://repos.influxdata.com/raspbian bullseye Release' does not have a Release file.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:12001           0.0.0.0:*               LISTEN      1001       663955     30230/io.hm-rpc.1
tcp        0      0 0.0.0.0:12010           0.0.0.0:*               LISTEN      1001       663390     30271/io.hm-rpc.2
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          12741      518/cupsd
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       660964     30114/iobroker.js-c
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       660971     30114/iobroker.js-c
tcp        0      0 0.0.0.0:18701           0.0.0.0:*               LISTEN      1001       663966     30221/io.hm-rpc.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12176      563/sshd: /usr/sbin
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        12744      536/influxd
tcp6       0      0 :::8086                 :::*                    LISTEN      999        15881      536/influxd
tcp6       0      0 :::3000                 :::*                    LISTEN      115        12823      526/grafana-server
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          12740      518/cupsd
tcp6       0      0 :::22                   :::*                    LISTEN      0          12178      563/sshd: /usr/sbin
udp        0      0 192.168.178.36:5353     0.0.0.0:*                           1001       664016     30286/io.tr-064.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12096      396/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       664772     30278/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12771      469/dhcpcd
udp        0      0 0.0.0.0:47183           0.0.0.0:*                           1001       665324     30464/io.snmp.0
udp        0      0 0.0.0.0:49317           0.0.0.0:*                           108        12098      396/avahi-daemon: r
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          15834      602/cups-browsed
udp6       0      0 :::5353                 :::*                                108        12097      396/avahi-daemon: r
udp6       0      0 :::35623                :::*                                108        12099      396/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-10-17 23:24:51.363  - warn: shelly.0 (30278) [authEnabled] 192.168.178.49 (shelly1 / shelly1-E098069629A1 / SHSW-1#E098069629A1#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:24:51.415  - warn: shelly.0 (30278) [authEnabled] 192.168.178.52 (shelly1 / shelly1-E09806963B80 / SHSW-1#E09806963B80#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:24:51.428  - warn: shelly.0 (30278) [authEnabled] 192.168.178.55 (shelly1 / shelly1-40F52000F535 / SHSW-1#40F52000F535#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:24:53.724  - warn: shelly.0 (30278) [authEnabled] 192.168.178.54 (shellyswitch25 / shellyswitch25-BCDDC277A135 / SHSW-25#BCDDC277A135#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:24:56.746  - warn: shelly.0 (30278) [authEnabled] 192.168.178.52 (shelly1 / shelly1-E09806963B80 / SHSW-1#E09806963B80#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:24:56.748  - warn: shelly.0 (30278) [authEnabled] 192.168.178.49 (shelly1 / shelly1-E098069629A1 / SHSW-1#E098069629A1#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:24:56.805  - warn: shelly.0 (30278) [authEnabled] 192.168.178.55 (shelly1 / shelly1-40F52000F535 / SHSW-1#40F52000F535#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:24:58.970  - warn: shelly.0 (30278) [authEnabled] 192.168.178.54 (shellyswitch25 / shellyswitch25-BCDDC277A135 / SHSW-25#BCDDC277A135#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:25:00.025  - info: upnp.0 (31633) Scheduled restart.
2023-10-17 23:25:00.040  - info: upnp.0 (31633) terminating
2023-10-17 23:25:00.042  - info: upnp.0 (31633) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2023-10-17 23:25:00.542  - info: upnp.0 (31633) terminating
2023-10-17 23:25:00.555  - warn: upnp.0 (31633) get state error: Connection is closed.
2023-10-17 23:25:00.805  - info: host.raspberrypi instance system.adapter.upnp.0 scheduled normal terminated and will be restarted on schedule.
2023-10-17 23:25:00.805  - info: host.raspberrypi Restart adapter system.adapter.upnp.0 because enabled
2023-10-17 23:25:02.063  - info: host.raspberrypi instance system.adapter.upnp.0 started with pid 31847
2023-10-17 23:25:02.074  - warn: shelly.0 (30278) [authEnabled] 192.168.178.49 (shelly1 / shelly1-E098069629A1 / SHSW-1#E098069629A1#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:25:02.123  - warn: shelly.0 (30278) [authEnabled] 192.168.178.52 (shelly1 / shelly1-E09806963B80 / SHSW-1#E09806963B80#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:25:02.172  - warn: shelly.0 (30278) [authEnabled] 192.168.178.55 (shelly1 / shelly1-40F52000F535 / SHSW-1#40F52000F535#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:25:14.260  - warn: upnp.0 (31847) slow connection to objects DB. Still waiting ...
2023-10-17 23:25:25.838  - warn: shelly.0 (30278) [authEnabled] 192.168.178.52 (shelly1 / shelly1-E09806963B80 / SHSW-1#E09806963B80#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:25:25.845  - warn: shelly.0 (30278) [authEnabled] 192.168.178.55 (shelly1 / shelly1-40F52000F535 / SHSW-1#40F52000F535#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:25:26.294  - warn: shelly.0 (30278) [authEnabled] 192.168.178.49 (shelly1 / shelly1-E098069629A1 / SHSW-1#E098069629A1#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:25:27.093  - warn: shelly.0 (30278) [authEnabled] 192.168.178.54 (shellyswitch25 / shellyswitch25-BCDDC277A135 / SHSW-25#BCDDC277A135#1): This device is not protected via restricted login (see adapter documentation for details)
2023-10-17 23:25:27.436  - info: host.raspberrypi instance system.adapter.admin.0 started with pid 31897

iobroker ist übers Webinterface nach wie vor nicht erreichbar. Sind aus der Diagnose evtl. weitere Fehler ableitbar ?

Thomas Braun

@pahan sagte in iobroker läuft wieder nicht...:

load average: 8.90, 7.26, 8.08

Immer noch abnorm viel.

iob stop javascript
iob start admin

Influx ist aber noch falsch:

E: The repository 'https://repos.influxdata.com/raspbian bullseye Release' does not have a Release file.

Pahan

@thomas-braun sagte in iobroker läuft wieder nicht...:

@pahan sagte in iobroker läuft wieder nicht...:

load average: 8.90, 7.26, 8.08

Immer noch abnorm viel.
iob stop javascript
iob start admin

liefert:

pi@raspberrypi:~ $ iob stop javascript
Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!

pi@raspberrypi:~ $ iob start admin
No connection to databases possible ...

Thomas Braun

@pahan
Dann schau mit

htop

nach, welcher Prozess da so auf das System einprügelt.

Pahan

@thomas-braun sagte in iobroker läuft wieder nicht...:

@pahan
Dann schau mit
htop
nach, welcher Prozess da so auf das System einprügelt.

ist natürlich stark schwankend, aber meistens schimmert der js.controller durch

Thomas Braun

@pahan

Da muss aber ein Prozess deutlich durchdrehen.

Thomas Braun

@pahan

So schaut ein stabiles System aus:

Sortier dir das nach CPU-Auslastung. Geht mit F6.

Pahan

@thomas-braun

sieht bei mir so aus, wobei der js.controller und influxdb sich jede Sekunde abwechseln

Thomas Braun

@pahan Du sollst das nach Percent_CPU sortieren, nicht nach M_Resident.

Pahan

@thomas-braun sagte in iobroker läuft wieder nicht...:

@pahan Du sollst das nach Percent_CPU sortieren, nicht nach M_Resident.

anbei eine Momentaufnahme :

Thomas Braun

@pahan

Bei einer konstanten Load von 12 muss da irgendwas herausstechen.

Nutzt dir aber auch nur bedingt was, das zu wissen. Da dürfte es irgendwo eine Fehleinstellung oder ein krummes Skript geben.

Pahan

@thomas-braun sagte in iobroker läuft wieder nicht...:

@pahan

Bei einer konstanten Load von 12 muss da irgendwas herausstechen.

Nutzt dir aber auch nur bedingt was, das zu wissen. Da dürfte es irgendwo eine Fehleinstellung oder ein krummes Skript geben.

...und deswegen ist die admin Instanz über den Webbrowser nicht erreichbar? Weil zu viel Speicher/CPU von einem anderen Dienst gebraucht wird?

Ich gehe mal auf die Suche....kann es mit Grafana oder InfluxDB zusammenhängen?

Und noch eine Frage: auf dem Raspi habe ich ja nur iobroker laufen. Macht es Sinn, eine Instanz nach der anderen zu deaktivieren und den Load dabei im Auge behalten, wann dieser stark abfällt?

Thomas Braun

@pahan sagte in iobroker läuft wieder nicht...:

...und deswegen ist die admin Instanz über den Webbrowser nicht erreichbar? Weil zu viel Speicher/CPU von einem anderen Dienst gebraucht wird?

Indirekt. Der Admin startet nicht, weil er die iob-interne Datenbank nicht erreichen kann. Und die kann nicht erreicht werden, weil die Kiste hoffnungslos mit irgendwas anderem zugeballert wird.

Und noch eine Frage: auf dem Raspi habe ich ja nur iobroker laufen.

Und Grafana. Und Influx...

Macht es Sinn, eine Instanz nach der anderen zu deaktivieren und den Load dabei im Auge behalten, wann dieser stark abfällt?

Kannst du probieren. Da wird aber vermutlich nicht auf einen Adapter/Instanz zurückzuführen sein.

? Offline

@pahan sagte in iobroker läuft wieder nicht...:

Und noch eine Frage: auf dem Raspi habe ich ja nur iobroker laufen.

Moin,

das sehe ich aber anders, Du hast da auch influxDB und Grafana installiert und am Laufen, siehe htop.

Wenn Du es verkraften kannst, eine Lücke in den Historien-Daten zu haben, würde ich mal Grafana und influxDB stoppen und schauen, was der Load dann macht.
Hast Du Skripte in ioBroker am Laufen, dann kann man auch alle Skripte mal stoppen und einzeln wieder anknipsen und schauen, ob da eines ist, das ein Problem verursacht.

Dann ist eine SD-Karte nicht unbedingt, die schnellste Art etwas zu speichern, gerade wenn es such noch Daten in eine influxDB sind, zumal das auch die Lebenszeit der SD-Karte verringert.

Dann ist Dein /var/log/journal 3 GB groß, da muss schon 'ne Menge an Log Information drin sein,

/var:
4.1G    /var/
3.4G    /var/log
3.0G    /var/log/journal/9177676efac74b1994c74dac83b5d5f4
3.0G    /var/log/journal

Du kannst Dir mal die letzten 100 Zeilen daraus anschauen

# sudo journalctl -n 100

Oder Du suchst direkt nach error

# sudo journalctl -g 'error'

Ich vermute, dass das System nicht sauber eingerichtet ist und daher auch die Logs nicht rotieren und nur anwachsen, in einem 3 GB großem File ist es dann auch schwer das wichtige herauszusuchen.
Um da erst mal wieder eine vernünftige Basis hinzubekommen, dampfen wir das journal erst einmal auf die letzten 24 Std. ein

# sudo journalctl --flush --rotate --vacuum-time=24h

Dann solltest Du schauen, ob Log Rotation eingerichtet ist und akkurat läuft

# sudo systemctl status logrotate.timer
# sudo systemctl status logrotate.service

Beides sollte in etwas so aussehen

dp20eic@iobroker:~$ sudo systemctl status logrotate.*
[sudo] password for dp20eic: 
* logrotate.timer - Daily rotation of log files
     Loaded: loaded (/lib/systemd/system/logrotate.timer; enabled; vendor preset: enabled)
     Active: active (waiting) since Tue 2023-10-17 09:21:40 CEST; 17h ago
    Trigger: Thu 2023-10-19 00:00:00 CEST; 20h left
   Triggers: * logrotate.service
       Docs: man:logrotate(8)
             man:logrotate.conf(5)

Oct 17 09:21:40 iobroker systemd[1]: Started Daily rotation of log files.
dp20eic@iobroker:~$ sudo systemctl status logrotate.service 
* logrotate.service - Rotate log files
     Loaded: loaded (/lib/systemd/system/logrotate.service; static)
     Active: inactive (dead) since Wed 2023-10-18 00:00:33 CEST; 3h 4min ago
TriggeredBy: * logrotate.timer
       Docs: man:logrotate(8)
             man:logrotate.conf(5)
    Process: 9236 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=0/SUCCESS)
   Main PID: 9236 (code=exited, status=0/SUCCESS)
        CPU: 69ms

Oct 18 00:00:33 iobroker systemd[1]: Starting Rotate log files...
Oct 18 00:00:33 iobroker systemd[1]: logrotate.service: Succeeded.
Oct 18 00:00:33 iobroker systemd[1]: Finished Rotate log files.

Was und wie rotiert wird, steht in den Konfigurationen

# ls -la /etc/logrotate.d/

VG
Bernd

Pahan

habe jetzt mal erst Grafana, dann InfluxDB angehalten. Die Auslastung ist nicht signifikant gesunken. Anschließend habe ich den iobroker angehalten und die Auslastung sank langsam bis auf ein Minumum ab. Dann habe ich Grafana und InfluxDB erneut gestartet, die Auslastung ist nicht gestiegen und sieht mit ausgeschaltetem iobroker so aus:

Pahan

@dp20eic sagte in iobroker läuft wieder nicht...:

Moin,

das sehe ich aber anders, Du hast da auch influxDB und Grafana installiert und am Laufen, siehe htop.

Wenn Du es verkraften kannst, eine Lücke in den Historien-Daten zu haben, würde ich mal Grafana und influxDB stoppen und schauen, was der Load dann macht.

den Test habe ich einen Beitrag höher gemacht

Hast Du Skripte in ioBroker am Laufen, dann kann man auch alle Skripte mal stoppen und einzeln wieder anknipsen und schauen, ob da eines ist, das ein Problem verursacht.

Sehr guter Punkt, wie kann ich die einzelnen Scripte über die Shell stoppen? Übers Webinterface komme ich ja nicht drauf.

Dann ist eine SD-Karte nicht unbedingt, die schnellste Art etwas zu speichern, gerade wenn es such noch Daten in eine influxDB sind, zumal das auch die Lebenszeit der SD-Karte verringert.

Dann ist Dein /var/log/journal 3 GB groß, da muss schon 'ne Menge an Log Information drin sein,
/var:
4.1G    /var/
3.4G    /var/log
3.0G    /var/log/journal/9177676efac74b1994c74dac83b5d5f4
3.0G    /var/log/journal
Du kannst Dir mal die letzten 100 Zeilen daraus anschauen
# sudo journalctl -n 100

Das ist die Ausgabe hierzu :

pi@raspberrypi:~ $ sudo journalctl -n 100
-- Journal begins at Tue 2023-10-17 23:35:32 CEST, ends at Wed 2023-10-18 22:30:43 CEST. --
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:23:55.309088Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:23:45 +0200] "POST /write?databa>
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:23:55.312711Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:23:45 +0200] "POST /write?databa>
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:23:55.661974Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:01.843854Z lvl=info msg="failed to store statistics" l>
Oct 18 22:24:05 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:23:55 +0200] "POST /write?databa>
Oct 18 22:24:05 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:05.396397Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:09 raspberrypi kernel: mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
Oct 18 22:24:18 raspberrypi kernel: mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
Oct 18 22:24:27 raspberrypi kernel: mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
Oct 18 22:24:27 raspberrypi kernel: I/O error, dev mmcblk0, sector 21772856 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?databa>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.430373Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?databa>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431223Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?databa>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431333Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?databa>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431746Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?databa>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431810Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?databa>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431997Z lvl=error msg="[500] - \"timeout\"" log_id=>
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.iot.0 => false [Process stopp>
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.logparser.0 => false [Process>
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.iot.0 => false [system.adapte>
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.logparser.0 => false [system.>
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [Process sto>
lines 1-30...skipping...
-- Journal begins at Tue 2023-10-17 23:35:32 CEST, ends at Wed 2023-10-18 22:30:43 CEST. --
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:23:55.309088Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:23:45 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:23:55.312711Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:23:45 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:23:55.661974Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:01 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:01.843854Z lvl=info msg="failed to store statistics" log_id=0ky5Mxt0000 service=monitor error=ti>
Oct 18 22:24:05 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:23:55 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:05 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:05.396397Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:09 raspberrypi kernel: mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
Oct 18 22:24:18 raspberrypi kernel: mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
Oct 18 22:24:27 raspberrypi kernel: mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
Oct 18 22:24:27 raspberrypi kernel: I/O error, dev mmcblk0, sector 21772856 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.430373Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431223Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431333Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431746Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431810Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.431997Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.iot.0 => false [Process stopped]
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.logparser.0 => false [Process stopped]
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.iot.0 => false [system.adapter.iot.0.logging]
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.logparser.0 => false [system.adapter.logparser.0.logging]
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [Process stopped]
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.432348Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.432359Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.432450Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.432920Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.433010Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.436476Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi bash[6214]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [system.adapter.admin.0.logging]
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.436740Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.436945Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.436984Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.437301Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.437642Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.437836Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.438126Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.438435Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.438681Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.438958Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.439043Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.439424Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.439482Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.440033Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.440330Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.440500Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.440880Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.440970Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.441260Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:01 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:11.442436Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:12.165812Z lvl=info msg="failed to store statistics" log_id=0ky5Mxt0000 service=monitor error=ti>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: [httpd] 127.0.0.1 - admin [18/Oct/2023:22:24:05 +0200] "POST /write?database=iobroker&db=iobroker&p=%5BREDACTED%5D&p>
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:15.403326Z lvl=error msg="[500] - \"timeout\"" log_id=0ky5Mxt0000 service=httpd
Oct 18 22:24:27 raspberrypi influxd-systemd-start.sh[5201]: ts=2023-10-18T20:24:22.414040Z lvl=info msg="failed to store statistics" log_id=0ky5Mxt0000 service=monitor error=ti>
Oct 18 22:24:28 raspberrypi systemd[1]: iobroker.service: Main process exited, code=exited, status=1/FAILURE
Oct 18 22:24:28 raspberrypi systemd[1]: iobroker.service: Failed with result 'exit-code'.
Oct 18 22:24:28 raspberrypi systemd[1]: Stopped ioBroker Server.
Oct 18 22:24:28 raspberrypi systemd[1]: iobroker.service: Consumed 8min 9.021s CPU time.
Oct 18 22:24:28 raspberrypi sudo[7441]: pam_unix(sudo:session): session closed for user root
Oct 18 22:29:24 raspberrypi sudo[7455]:       pi : TTY=pts/0 ; PWD=/home/pi ; USER=root ; COMMAND=/usr/bin/journalctl --flush --rotate --vacuum-time=24h
Oct 18 22:29:24 raspberrypi sudo[7455]: pam_unix(sudo:session): session opened for user root(uid=0) by pi(uid=1000)
Oct 18 22:29:24 raspberrypi systemd-journald[3968]: System Journal (/var/log/journal/9177676efac74b1994c74dac83b5d5f4) is 304.0M, max 2.8G, 2.5G free.
Oct 18 22:29:24 raspberrypi sudo[7455]: pam_unix(sudo:session): session closed for user root
Oct 18 22:30:24 raspberrypi grafana[5179]: logger=cleanup t=2023-10-18T22:30:24.714401245+02:00 level=info msg="Completed cleanup jobs" duration=30.472164ms
Oct 18 22:30:25 raspberrypi grafana[5179]: logger=grafana.update.checker t=2023-10-18T22:30:25.003111806+02:00 level=info msg="Update check succeeded" duration=64.09045ms
Oct 18 22:30:25 raspberrypi grafana[5179]: logger=plugins.update.checker t=2023-10-18T22:30:25.133734372+02:00 level=info msg="Update check succeeded" duration=139.361941ms
Oct 18 22:30:43 raspberrypi sudo[7463]:       pi : TTY=pts/0 ; PWD=/home/pi ; USER=root ; COMMAND=/usr/bin/journalctl -n 100
Oct 18 22:30:43 raspberrypi sudo[7463]: pam_unix(sudo:session): session opened for user root(uid=0) by pi(uid=1000)

Um da erst mal wieder eine vernünftige Basis hinzubekommen, dampfen wir das journal erst einmal auf die letzten 24 Std. ein
# sudo journalctl --flush --rotate --vacuum-time=24h 

Habe ich gemacht

Dann solltest Du schauen, ob Log Rotation eingerichtet ist und akkurat läuft

sieht bei mir auch so aus, wie bei dir

Community Forum

NEWS

iobroker läuft wieder nicht...

Support us

667

32.7k

82.3k

1.3m