ioBroker extrem langsam
-
@haselchen sagte in ioBroker extrem langsam:
iob diag
*** BASE SYSTEM *** Static hostname: raspberrypi4-iobroker Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 17:52:10 up 20:23, 1 user, load average: 2.58, 3.55, 3.71 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-10-16 17:52:10 CEST Universal time: Mon 2023-10-16 15:52:10 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 1.5G 4.6G 0.0K 1.7G 6.2G Swap: 99M 0B 99M Total: 7.9G 1.5G 4.7G 7811 M total memory 1516 M used memory 2222 M active memory 849 M inactive memory 4578 M free memory 86 M buffer memory 1629 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 23G 90G 21% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 16K 3.9G 1% /dev/shm tmpfs tmpfs 1.6G 904K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sdb1 exfat 29G 2.7G 27G 10% /mnt/usb0 /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Oct 15 21:29:08 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:FD:BB:CC vc_mem. mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 console=ttyS0,11520 0 root=PARTUUID=1045efe5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes ro otwait [Sun Oct 15 21:29:11 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Oct 15 21:29:11 2023] VFS: Mounted root (ext4 filesystem) readonly on devic e 8:2. [Sun Oct 15 21:29:14 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/mnt/usb0 /dev/sdb1 exfat rw,nosuid,nodev,noexec,relatime,fmask=0000,dmask=00 00,allow_utime=0022,iocharset=utf8,errors=remount-ro `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,ioch arset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 4.9G /var/ 3.9G /var/log 3.7G /var/log/journal/ceda8666c83a44189d7d8b22875c3095 3.7G /var/log/journal 502M /var/lib Archived and active journals take up 3.6G in the file system. /opt/iobroker/backups: 6.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 899M /opt/iobroker/iobroker-data/ 430M /opt/iobroker/iobroker-data/history 324M /opt/iobroker/iobroker-data/files 85M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56. js.map 25M /opt/iobroker/iobroker-data/states.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.m ap 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.m ap 11M /opt/iobroker/iobroker-data/objects.json.broken USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Package s Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: 7.1.4 Adapters from github: 3 Adapter State + system.adapter.admin.0 : admin : raspberrypi4-iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi4-iobroker - enabled + system.adapter.backitup.0 : backitup : raspberrypi4-iobroker - enabled + system.adapter.cloud.0 : cloud : raspberrypi4-iobroker - enabled system.adapter.devices.0 : devices : raspberrypi4-iobroker - disabled + system.adapter.discovery.0 : discovery : raspberrypi4-iobroker - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi4-iobroker - enabled + system.adapter.energiefluss.1 : energiefluss : raspberrypi4-iobroker - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi4-iobroker - disabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi4-iobroker - disabled + system.adapter.growatt.0 : growatt : raspberrypi4-iobroker - enabled + system.adapter.history.0 : history : raspberrypi4-iobroker - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi4-iobroker - enabled + system.adapter.hs100.0 : hs100 : raspberrypi4-iobroker - enabled + system.adapter.info.0 : info : raspberrypi4-iobroker - enabled + system.adapter.iot.0 : iot : raspberrypi4-iobroker - enabled + system.adapter.javascript.0 : javascript : raspberrypi4-iobroker - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi4-iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : raspberrypi4-iobroker - enabled, port: 80 + system.adapter.rpi2.0 : rpi2 : raspberrypi4-iobroker - enabled + system.adapter.shelly.0 : shelly : raspberrypi4-iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartthings.0 : smartthings : raspberrypi4-iobroker - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi4-iobroker - enabled + system.adapter.telegram.0 : telegram : raspberrypi4-iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tuya.0 : tuya : raspberrypi4-iobroker - disabled system.adapter.vis.0 : vis : raspberrypi4-iobroker - disabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi4-iobroker - enabled + system.adapter.web.0 : web : raspberrypi4-iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : raspberrypi4-iobroker - enabled system.adapter.zigbee.0 : zigbee : raspberrypi4-iobroker - disabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2414409-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi4-iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi4-iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : raspberrypi4-iobroker - enabled, port: 80 + system.adapter.shelly.0 : shelly : raspberrypi4-iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi4-iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi4-iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "alexa2" : 3.25.2 , installed 3.25.2 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "growatt" : 3.2.1 , installed 3.2.1 Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "plenticore" : 2.2.0 , installed 2.3.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartthings" : 0.0.4 , installed 0.0.4 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "wled" : 0.7.1 , installed 0.7.1 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 8968 States: 16359 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Get:4 https://repos.influxdata.com/debian bullseye InRelease [7040 B] Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Err:4 https://repos.influxdata.com/debian bullseye InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E Fetched 7040 B in 2s (3908 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 12652 427/influxd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 110 15421 577/mosquitto tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 12965 776/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16684 776/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13913 574/sshd: /usr/sbin tcp 0 0 0.0.0.0:8765 0.0.0.0:* LISTEN 0 15457 422/python tcp6 0 0 :::8086 :::* LISTEN 999 12825 427/influxd tcp6 0 0 :::8082 :::* LISTEN 1001 21903 1679/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 14290 1089/io.admin.0 tcp6 0 0 :::1883 :::* LISTEN 110 15422 577/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 13915 574/sshd: /usr/sbin udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13979 484/dhcpcd udp 0 0 0.0.0.0:49382 0.0.0.0:* 108 13746 399/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 19160 1888/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13744 399/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 17601 1247/io.shelly.0 udp6 0 0 :::546 :::* 0 15323 484/dhcpcd udp6 0 0 :::5353 :::* 108 13745 399/avahi-daemon: r udp6 0 0 :::55835 :::* 108 13747 399/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-16 17:50:37.856 - info: admin.0 (1089) Subscribe to all states again 2023-10-16 17:50:40.956 - info: admin.0 (1089) Unsubscribe from all states, except system's, because over 3 seconds the number of events is over 200 (in last second 0) 2023-10-16 17:51:39.536 - error: host.raspberrypi4-iobroker Caught by controller[0]: <--- Last few GCs ---> 2023-10-16 17:51:39.538 - error: host.raspberrypi4-iobroker Caught by controller[0]: [32592:0x54af008] 39717362 ms: Scavenge 908.4 (1045.2) -> 907.7 (1045.2) MB, 10.5 / 0.0 ms (average mu = 0.912, current mu = 0.956) allocation failure; 2023-10-16 17:51:39.538 - error: host.raspberrypi4-iobroker Caught by controller[0]: [32592:0x54af008] 39717425 ms: Scavenge 908.8 (1045.2) -> 908.2 (1045.2) MB, 10.3 / 0.0 ms (average mu = 0.912, current mu = 0.956) allocation failure; 2023-10-16 17:51:39.538 - error: host.raspberrypi4-iobroker Caught by controller[0]: [32592:0x54af008] 39717454 ms: Scavenge 909.5 (1045.2) -> 909.4 (1049.2) MB, 24.8 / 0.0 ms (average mu = 0.912, current mu = 0.956) allocation failure; 2023-10-16 17:51:39.538 - error: host.raspberrypi4-iobroker Caught by controller[0]: <--- JS stacktrace ---> 2023-10-16 17:51:39.538 - error: host.raspberrypi4-iobroker Caught by controller[0]: FATAL ERROR: Reached heap limit Allocation failed - JavaScript heap out of memory 2023-10-16 17:51:39.539 - warn: host.raspberrypi4-iobroker instance system.adapter.smartthings.0 terminated due to SIGABRT 2023-10-16 17:51:39.539 - info: host.raspberrypi4-iobroker instance system.adapter.smartthings.0 terminated with code null () 2023-10-16 17:51:39.539 - info: host.raspberrypi4-iobroker Restart adapter system.adapter.smartthings.0 because enabled 2023-10-16 17:51:41.875 - info: admin.0 (1089) Subscribe to all states again 2023-10-16 17:51:44.975 - info: admin.0 (1089) Unsubscribe from all states, except system's, because over 3 seconds the number of events is over 200 (in last second 0) 2023-10-16 17:52:06.891 - info: weatherunderground.0 (30819) Terminated (NO_ERROR): Without reason 2023-10-16 17:52:07.426 - info: host.raspberrypi4-iobroker instance system.adapter.weatherunderground.0 terminated with code 0 (NO_ERROR) 2023-10-16 17:52:09.657 - info: host.raspberrypi4-iobroker instance system.adapter.smartthings.0 started with pid 5069 2023-10-16 17:52:13.567 - info: smartthings.0 (5069) starting. Version 0.0.4 (non-npm: TA2k/ioBroker.smartthings#2f3c7e70f203e4c904dba0d692a387e1c44d7bbe) in /opt/iobroker/node_modules/iobroker.smartthings, node: v18.18.2, js-controller: 5.0.12 2023-10-16 17:52:13.618 - info: smartthings.0 (5069) Set interval to minimum 1 2023-10-16 17:52:14.363 - info: smartthings.0 (5069) 4 devices detected 2023-10-16 17:52:45.899 - info: admin.0 (1089) Subscribe to all states again 2023-10-16 17:52:49.000 - info: admin.0 (1089) Unsubscribe from all states, except system's, because over 3 seconds the number of events is over 200 (in last second 0) 2023-10-16 17:52:54.129 - info: alexa2.0 (1159) Alexa-Push-Connection disconnected - retry: Retry Connection in 1s (undefined: undefined) 2023-10-16 17:52:55.811 - info: alexa2.0 (1159) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-10-16 17:53:49.341 - info: admin.0 (1089) Subscribe to all states again 2023-10-16 17:53:53.486 - info: admin.0 (1089) Unsubscribe from all states, except system's, because over 3 seconds the number of events is over 200 (in last second 0) -
@spidermike setz das ganze bitte in Codetags - dann kann man das besser lesen
-
@djmarc75 sagte in ioBroker extrem langsam:
@spidermike setz das ganze bitte in Codetags - dann kann man das besser lesen
jetzt besser habs geändert
-
@spidermike sagte in ioBroker extrem langsam:
Err:4 https://repos.influxdata.com/debian bullseye InRelease
Da musst du ran.
Es muss ein neuer Schlüssel installiert werden. -
@thomas-braun sagte in ioBroker extrem langsam:
@spidermike sagte in ioBroker extrem langsam:
Err:4 https://repos.influxdata.com/debian bullseye InRelease
Da musst du ran.
Es muss ein neuer Schlüssel installiert werden.ich dachte das hab ich gestern gemacht
kannst Du mir nochmal sagen wie genau das geht
-
wget -q https://repos.influxdata.com/influxdata-archive_compat.key echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdata-archive_compat.gpg > /dev/null echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list -
@thomas-braun sagte in ioBroker extrem langsam:
echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
pi@raspberrypi4-iobroker:~ $ wget -q https://repos.influxdata.com/influxdata-arc hive_compat.key pi@raspberrypi4-iobroker:~ $ echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133fadd af92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxd ata-archive_compat.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdata -archive_compat.gpg > /dev/null influxdata-archive_compat.key: OK pi@raspberrypi4-iobroker:~ $ echo 'deb [signed-by=/usr/share/keyrings/influxdata -archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos. influxdata.com/debian stable main pi@raspberrypi4-iobroker:~ $ist das korrekt gelaufen?
-
@spidermike sagte in ioBroker extrem langsam:
ist das korrekt gelaufen?
Das siehst du, wenn du dein System wie üblich aktuell hältst...
sudo apt update sudo apt full-upgradeBitte verwende puTTY im Vollbild (oder gleich ein besseres Terminal)
-
pi@raspberrypi4-iobroker:~ $ sudo apt update OK:1 http://phoscon.de/apt/deconz bullseye InRelease OK:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease OK:3 http://archive.raspberrypi.org/debian bullseye InRelease Holen:4 https://repos.influxdata.com/debian stable InRelease [6.892 B] Holen:5 https://repos.influxdata.com/debian bullseye InRelease [7.040 B] OK:6 https://deb.nodesource.com/node_18.x nodistro InRelease Holen:7 https://repos.influxdata.com/debian stable/main armhf Packages [3.417 B] Fehl:5 https://repos.influxdata.com/debian bullseye InRelease Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY D8FF8E1F7DF8B07E Es wurden 17,3 kB in 2 s geholt (9.321 B/s). Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Alle Pakete sind aktuell. W: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. GPG-Fehler: https://repos.influxdata.com/debian bullseye InRelease: Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY D8FF8E1F7DF8B07E W: Fehlschlag beim Holen von https://repos.influxdata.com/debian/dists/bullseye/InRelease Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY D8FF8E1F7DF8B07E W: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt. pi@raspberrypi4-iobroker:~ $ sudo apt update OK:1 http://phoscon.de/apt/deconz bullseye InRelease OK:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease OK:3 http://archive.raspberrypi.org/debian bullseye InRelease OK:4 https://repos.influxdata.com/debian stable InRelease Holen:5 https://repos.influxdata.com/debian bullseye InRelease [7.040 B] OK:6 https://deb.nodesource.com/node_18.x nodistro InRelease Fehl:5 https://repos.influxdata.com/debian bullseye InRelease Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY D8FF8E1F7DF8B07E Es wurden 7.040 B in 2 s geholt (3.996 B/s). Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Alle Pakete sind aktuell. W: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. GPG-Fehler: https://repos.influxdata.com/debian bullseye InRelease: Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY D8FF8E1F7DF8B07E W: Fehlschlag beim Holen von https://repos.influxdata.com/debian/dists/bullseye/InRelease Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY D8FF8E1F7DF8B07E W: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt. pi@raspberrypi4-iobroker:~ $der Fehler ist immer noch
-
ls -lAh /etc/apt/sources.list.d/wird dir zwei Dateien zu influx auflisten. Lösche die, die nicht
influxdata.listheißt. -
@thomas-braun sagte in ioBroker extrem langsam:
pi@raspberrypi4-iobroker:~ $ ls -lAh /etc/apt/sources.list.d/ insgesamt 20K -rw-r--r-- 1 root root 59 2. Feb 2022 deconz.list -rw-r--r-- 1 root root 114 16. Okt 18:29 influxdata.list -rw-r--r-- 1 root root 56 2. Feb 2022 influxdb.list -rw-r--r-- 1 root root 100 15. Okt 20:11 nodesource.list -rw-r--r-- 1 root root 191 2. Feb 2022 raspi.listok und wie lösche ich die "influxdb.list" ???
und was mach ich dann ? -
@spidermike sagte in ioBroker extrem langsam:
https://www.google.com/search?client=firefox-b-e&q=Wie+lösche+ich+Dateien+Linux
Ergebnis deiner Suche:
sudo rm /etc/apt/sources.list.d/influxdb.list -
vielen Dank das hat jetzt geklappt
pi@raspberrypi4-iobroker:~ $ sudo rm /etc/apt/sources.list.d/influxdb.list pi@raspberrypi4-iobroker:~ $ pi@raspberrypi4-iobroker:~ $ ls -lAh /etc/apt/sources.list.d/ insgesamt 16K -rw-r--r-- 1 root root 59 2. Feb 2022 deconz.list -rw-r--r-- 1 root root 114 16. Okt 18:29 influxdata.list -rw-r--r-- 1 root root 100 15. Okt 20:11 nodesource.list -rw-r--r-- 1 root root 191 2. Feb 2022 raspi.list pi@raspberrypi4-iobroker:~ $ sudo apt update OK:1 http://phoscon.de/apt/deconz bullseye InRelease Holen:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease [15,0 kB] OK:3 http://archive.raspberrypi.org/debian bullseye InRelease OK:4 https://repos.influxdata.com/debian stable InRelease OK:5 https://deb.nodesource.com/node_18.x nodistro InRelease Es wurden 15,0 kB in 2 s geholt (9.641 B/s). Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Alle Pakete sind aktuell. pi@raspberrypi4-iobroker:~ $ sudo apt update OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease OK:2 http://phoscon.de/apt/deconz bullseye InRelease OK:3 http://archive.raspberrypi.org/debian bullseye InRelease OK:4 https://repos.influxdata.com/debian stable InRelease OK:5 https://deb.nodesource.com/node_18.x nodistro InRelease Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Alle Pakete sind aktuell.Ich danke Dir vielmals
Habe ich noch mehr Baustellen?
-
@spidermike sagte in ioBroker extrem langsam:
Habe ich noch mehr Baustellen?
Schau dir
iob diagjetzt an.
-
*** BASE SYSTEM *** Static hostname: raspberrypi4-iobroker Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 19:18:03 up 44 min, 1 user, load average: 2.13, 2.49, 2.37 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-10-16 19:18:03 CEST Universal time: Mon 2023-10-16 17:18:03 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 1.4G 5.1G 0.0K 1.3G 6.4G Swap: 99M 0B 99M Total: 7.9G 1.4G 5.2G 7811 M total memory 1437 M used memory 2081 M active memory 495 M inactive memory 5076 M free memory 82 M buffer memory 1214 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 23G 90G 21% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 16K 3.9G 1% /dev/shm tmpfs tmpfs 1.6G 904K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sdb1 exfat 29G 2.7G 27G 10% /mnt/usb0 /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Oct 16 18:33:05 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:FD:BB:CC vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 console=ttyS0,115200 root=PARTUUID=1045efe5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Mon Oct 16 18:33:08 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Oct 16 18:33:08 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Mon Oct 16 18:33:11 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/mnt/usb0 /dev/sdb1 exfat rw,nosuid,nodev,noexec,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 4.9G /var/ 3.9G /var/log 3.7G /var/log/journal/ceda8666c83a44189d7d8b22875c3095 3.7G /var/log/journal 486M /var/lib Archived and active journals take up 3.6G in the file system. /opt/iobroker/backups: 6.2G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 894M /opt/iobroker/iobroker-data/ 431M /opt/iobroker/iobroker-data/history 324M /opt/iobroker/iobroker-data/files 85M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 18M /opt/iobroker/iobroker-data/objects.jsonl 11M /opt/iobroker/iobroker-data/objects.json.broken USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: 7.1.4 Adapters from github: 3 Adapter State + system.adapter.admin.0 : admin : raspberrypi4-iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi4-iobroker - enabled + system.adapter.backitup.0 : backitup : raspberrypi4-iobroker - enabled + system.adapter.cloud.0 : cloud : raspberrypi4-iobroker - enabled system.adapter.devices.0 : devices : raspberrypi4-iobroker - disabled + system.adapter.discovery.0 : discovery : raspberrypi4-iobroker - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi4-iobroker - enabled + system.adapter.energiefluss.1 : energiefluss : raspberrypi4-iobroker - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi4-iobroker - disabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi4-iobroker - disabled + system.adapter.growatt.0 : growatt : raspberrypi4-iobroker - enabled + system.adapter.history.0 : history : raspberrypi4-iobroker - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi4-iobroker - enabled + system.adapter.hs100.0 : hs100 : raspberrypi4-iobroker - enabled + system.adapter.info.0 : info : raspberrypi4-iobroker - enabled + system.adapter.iot.0 : iot : raspberrypi4-iobroker - enabled + system.adapter.javascript.0 : javascript : raspberrypi4-iobroker - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi4-iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : raspberrypi4-iobroker - enabled, port: 80 + system.adapter.rpi2.0 : rpi2 : raspberrypi4-iobroker - enabled + system.adapter.shelly.0 : shelly : raspberrypi4-iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartthings.0 : smartthings : raspberrypi4-iobroker - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi4-iobroker - enabled + system.adapter.telegram.0 : telegram : raspberrypi4-iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tuya.0 : tuya : raspberrypi4-iobroker - disabled system.adapter.vis.0 : vis : raspberrypi4-iobroker - disabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi4-iobroker - enabled + system.adapter.web.0 : web : raspberrypi4-iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : raspberrypi4-iobroker - enabled system.adapter.zigbee.0 : zigbee : raspberrypi4-iobroker - disabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2414409-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi4-iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi4-iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : raspberrypi4-iobroker - enabled, port: 80 + system.adapter.shelly.0 : shelly : raspberrypi4-iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi4-iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi4-iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "alexa2" : 3.25.2 , installed 3.25.2 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "growatt" : 3.2.1 , installed 3.2.1 Adapter "history" : 2.2.6 , installed 2.2.6 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "plenticore" : 2.2.0 , installed 2.3.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartthings" : 0.0.4 , installed 0.0.4 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "wled" : 0.7.1 , installed 0.7.1 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 8967 States: 16358 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 110 3971 565/mosquitto tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 3948 431/influxd tcp 0 0 0.0.0.0:8765 0.0.0.0:* LISTEN 0 14704 424/python tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15383 567/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16563 1093/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 14996 1093/iobroker.js-co tcp6 0 0 :::1883 :::* LISTEN 110 3972 565/mosquitto tcp6 0 0 :::22 :::* LISTEN 0 15385 567/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 15735 1122/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 17402 1712/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 17488 431/influxd udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14756 476/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 17386 1925/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14497 398/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 15923 1282/io.shelly.0 udp 0 0 0.0.0.0:43207 0.0.0.0:* 108 14499 398/avahi-daemon: r udp6 0 0 :::546 :::* 0 14769 476/dhcpcd udp6 0 0 :::33860 :::* 108 14500 398/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14498 398/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-16 19:20:55.065 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1005Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:20:56.227 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 998Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:20:58.810 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 997Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:01.758 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 980Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:03.320 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 969Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:04.738 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 977Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:05.333 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 996Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:06.825 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1027Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:08.736 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1045Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:10.255 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1059Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:15.346 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1028Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:17.015 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1037Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:18.524 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1030Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:20.274 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1021Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:23.318 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1027Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:24.371 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1040Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:26.455 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1046Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:27.042 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1044Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:29.435 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1045Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:30.672 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1052Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:32.978 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1031Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:33.685 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1033Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:37.013 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1036Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:39.018 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 999Heiz-Stufe: 0Boilertemp: 43.8 2023-10-16 19:21:40.270 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1002Heiz-Stufe: 0Boilertemp: 43.8Ich glaube das schaut jetzt ok aus, oder?
-
@spidermike sagte in ioBroker extrem langsam:
oder
was rotiert denn da auf dem Pi?
@spidermike sagte in ioBroker extrem langsam:
load average: 2.13, 2.49, 2.37
ist schon nicht wenig
-
@homoran sagte in ioBroker extrem langsam:
@spidermike sagte in ioBroker extrem langsam:
oder
was rotiert denn da auf dem Pi?
@spidermike sagte in ioBroker extrem langsam:
load average: 2.13, 2.49, 2.37
ist schon nicht wenig
was meinst Du?
mach mir jetzt nicht angst. -
@spidermike sagte in ioBroker extrem langsam:
was meinst Du?
dein pi ist noch gut unter Last.
nicht grenzwertig, aber bei einer Load average durchgehend über 2 würde ich neugierig werden und wissen wollen warum -
@spidermike sagte in ioBroker extrem langsam:
2023-10-16 19:20:55.065 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1005Heiz-Stufe: 0Boilertemp: 43.8
Moin,
da spuckt ein Skript, alle Sekunde was aus, das ist sicherlich so nicht gewollt, was machst Du da, das kann auch dazu führen, dass Du einen erhöhten Load hast, also dass Dein System sich langsamer anfühlt.
VG
Bernd -
@dp20eic sagte in ioBroker extrem langsam:
@spidermike sagte in ioBroker extrem langsam:
2023-10-16 19:20:55.065 - info: javascript.0 (1166) script.js.Warmwasser_.Test_2: Einspeisung: 0Netz-Bezug: 1005Heiz-Stufe: 0Boilertemp: 43.8
Moin,
da spuckt ein Skript, alle Sekunde was aus, das ist sicherlich so nicht gewollt, was machst Du da, das kann auch dazu führen, dass Du einen erhöhten Load hast, also dass Dein System sich langsamer anfühlt.
VG
BerndMoin,
das Script (zumindest das depug output) lief nur zu diesen Zeitpunkt schalte das Protokoll nur zu wenn ich schauen will was passiert.
Ich teste das Script momentan und schaue ob die Werte und schaltungen stimmen wie es soll.
Ist PV Überschuss zum schalten von 2 Heizstäben. Ist einer andere Sache im Forum unter Blockly Script in Diskussion.
