ioBroker extrem langsam

qwerty1896

@thomas-braun

Danke. Ich muss mich allerdings auch um die Installation kümmern - auf meinem Raspberry sehr fehleranfällig.

Was nach dem Updates (s.o.) leider nicht mehr funktioniert, ist der Versand von eCharts an Telegram.

Thomas Braun

@qwerty1896 sagte in ioBroker extrem langsam:

Ich muss mich allerdings auch um die Installation kümmern - auf meinem Raspberry sehr fehleranfällig.

Ja, um Updates usw. musst du dich kümmern. Stimmt.

qwerty1896

@thomas-braun

Fehlerlog eCharts

Cannot find required modules: Error: The module '/opt/iobroker/node_modules/canvas/build/Release/canvas.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 93. This version of Node.js requires NODE_MODULE_VERSION 108. Please try re-compiling or re-installing the module (for instance, using `npm rebuild` or `npm install`).

Fehlerlog Telegram

script.js.common.PV_Menue: Cannot find required modules: looks like it is not possible to generate charts on your Hardware/OS

Thomas Braun

@qwerty1896

echarts bzw. canvas sollte sich bei 'gesunder' Installation von 'alleine' einrenken. Das rebuild dauert aber ggf.

Hier tut es das jedenfalls:

echad@chet:/opt/iobroker $ npm ls canvas
iobroker.inst@3.0.0 /opt/iobroker
├─┬ iobroker.echarts@1.5.4
│ ├── canvas@2.11.2
│ └─┬ jsdom@22.1.0
│   └── canvas@2.11.2 deduped
├─┬ iobroker.mihome-vacuum@4.0.0
│ └── canvas@2.11.2 deduped
└─┬ iobroker.parcel@0.1.2
  └─┬ jsdom@21.1.2
    └── canvas@2.11.2 deduped

qwerty1896

@thomas-braun

Sollte ich npm rebuild oder npm install testen?

"Normale" Texte werden noch an Telegram versendet.

Wie erzeugt man die Übersicht Deines letztes Beitrages ("Hier tut es das jedenfalls ...")?

Thomas Braun

@qwerty1896 sagte in ioBroker extrem langsam:

Sollte ich npm rebuild oder npm install testen?

Nein.

Thomas Braun

@qwerty1896 sagte in ioBroker extrem langsam:

Wie erzeugt man die Übersicht Deines letztes Beitrages ("Hier tut es das jedenfalls ...")?

Die Befehlszeile hatte ich bewusst mitkopiert:

echad@chet:/opt/iobroker $ npm ls canvas

qwerty1896

@thomas-braun said in ioBroker extrem langsam:

/opt/iobroker $ npm ls canvas

Deshalb habe ich gefragt. Das war das Resultat der Befehlszeile.

pi@raspberrypi:~ $ /opt/iobroker $ npm ls canvas
-bash: /opt/iobroker: Ist ein Verzeichnis

Thomas Braun

@qwerty1896

Ja, und in das Verzeichnis musst du zuvor wechseln...

cd /opt/iobroker && npm ls canvas

qwerty1896

@thomas-braun said in ioBroker extrem langsam:

cd /opt/iobroker && npm ls canvas


pi@raspberrypi:~ $ cd /opt/iobroker && npm ls canvas
iobroker.inst@3.0.0 /opt/iobroker
├─┬ iobroker.echarts@1.5.1
│ ├── canvas@2.11.2
│ └─┬ jsdom@22.1.0
│   └── canvas@2.11.2 deduped
└─┬ iobroker.energiefluss@3.5.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss.git#f5839fb65d074f80b2eb958a890bc7f443675538)
  └── canvas@2.11.2 deduped

qwerty1896

@qwerty1896

Mal sehen, ich werde mal einen Beitrag erstellen, ob Fehler zwischen eCharts und telegram bekannt sind.

Auf jeden Fall werden gerade Adapter zur Aktualisierung angeboten. Vielleicht helfen die ja weiter...

Edit:

Adapter    "javascript"   : 7.1.4    , installed 7.0.3  [Updatable]
Controller "js-controller": 5.0.12   , installed 4.0.24 [Updatable]
Adapter    "opendtu"      : 0.1.7    , installed 0.1.7
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.5.5    , installed 6.5.3  [Updatable]
Adapter    "sonoff"       : 2.5.3    , installed 2.5.3
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.1.2    , installed 6.1.1  [Updatable]
Adapter    "ws"           : 2.5.5    , installed 2.5.4  [Updatable]

Thomas Braun

@qwerty1896

Bring den ganzen Sums halt auf Stand. Macht man eh immer.
Wenn es nach dem Neustart der Kiste dann immer noch klemmt:

cd /opt/iobroker/node_modules/canvas && sudo -u iobroker npm rebuild

Spidermike

@thomas-braun

kannst Du mir auch mal helfen ?

mein iobroker läuft auch sehr langsam.

Homoran

@spidermike sagte in ioBroker extrem langsam:

kannst Du mir auch mal helfen ?

und wie?
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

Spidermike

@homoran sagte in ioBroker extrem langsam:

@spidermike sagte in ioBroker extrem langsam:

kannst Du mir auch mal helfen ?

und wie?
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

Sorry war ich noch nicht so weit
hoffe es ist besser so und du kannst damit was anfangen?

======================= SUMMARY =======================
                        v.2023-10-10


   Static hostname: raspberrypi4-iobroker
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 5.15.61-v7l+
      Architecture: arm

Installation:           native
Kernel:                 armv7l
Userland:               armhf
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     150
Uncaught Rejection: Error: Objects DB is not allowed to start in the current Multihost environment
    at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-objects-redis/build/lib/objects/objectsInRedisClient.js:493:23)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v20.7.0
                        /usr/bin/node           v20.7.0
                        /usr/bin/npm            10.1.0
                        /usr/bin/npx            10.1.0
                        /usr/bin/corepack       0.19.0

Recommended versions are nodejs  Cannot determine Set feature status: Connection is closed.
 Connection is closed. and npm
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.9G        1.9G        4.6G        0.0K        1.4G        5.8G
Swap:            99M          0B         99M
Total:          8.0G        1.9G        4.7G

Uncaught Rejection: Error: States DB is not allowed to start in the current Multihost environment
    at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-states-redis/build/lib/states/statesInRedisClient.js:459:23)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
Active iob-Instances:   0
No connection to databases possible ...

ioBroker Core:          js-controller           5.0.12
                        admin                   6.10.1

Uncaught Rejection: Error: States DB is not allowed to start in the current Multihost environment
    at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-states-redis/build/lib/states/statesInRedisClient.js:459:23)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
ioBroker Status:         Cannot determine Set feature status: Connection is closed.
 Connection is closed.

Status admin and web instance:
Uncaught Rejection: Error: Objects DB is not allowed to start in the current Multihost environment
    at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-objects-redis/build/lib/objects/objectsInRedisClient.js:493:23)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)

Objects:                3
States:                 1

Size of iob-Database:

18M     /opt/iobroker/iobroker-data/objects.jsonl
11M     /opt/iobroker/iobroker-data/objects.json.broken
5.0M    /opt/iobroker/iobroker-data/objects.json.migrated
5.0M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
33M     /opt/iobroker/iobroker-data/states.jsonl
3.0M    /opt/iobroker/iobroker-data/states.json.migrated
3.0M    /opt/iobroker/iobroker-data/states.json.bak.migrated
0       /opt/iobroker/iobroker-data/states.json.broken



=================== END OF SUMMARY ====================

=== Mark text until here for copying ===
pi@raspberrypi4-iobroker:~ $ ======= Start marking the full check here =========
-bash: =======: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
vpi@raspberrypi4-iobroker:~ $

> Skript v.2023-10-10
>
> *** BASE SYSTEM ***
>    Static hostname: raspberrypi4-iobroker
>          Icon name: computer
>   Operating System: Raspbian GNU/Linux 11 (bullseye)
>             Kernel: Linux 5.15.61-v7l+
>       Architecture: arm
>
/> Model           : Raspberry Pi 4 Model B Rev 1.4
> Docker          : false
> Virtualization  : none
> Kernel          : armv7l
> Userland        : armhf
>
j> Systemuptime and Load:
>  14:57:05 up  3:21,  1 user,  load average: 3.31, 3.28, 3.17
> CPU threads: 4
>
l>
e> *** RASPBERRY THROTTLING ***
> Current issues:
> No throttling issues detected.
>
> Previously detected issues:
> No throttling issues detected.
>
s> *** Time and Time Zones ***
>                Local time: Sun 2023-10-15 14:57:05 CEST
>            Universal time: Sun 2023-10-15 12:57:05 UTC
>                  RTC time: n/a
>                 Time zone: Europe/Berlin (CEST, +0200)
> System clock synchronized: yes
>               NTP service: active
>           RTC in local TZ: no
>
> *** User and Groups ***
> pi
2> /home/pi
> pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker
>
*> *** X-Server-Setup ***
> X-Server:       false
> Desktop:
> Terminal:       tty
> Boot Target:    graphical.target
>
 > *** MEMORY ***
>                total        used        free      shared  buff/cache   available
> Mem:            7.9G        1.8G        4.7G        0.0K        1.4G        5.9G
> Swap:            99M          0B         99M
> Total:          8.0G        1.8G        4.8G
>
1>          7897 M total memory
>          1848 M used memory
>           360 M active memory
>          2747 M inactive memory
>          4650 M free memory
>            96 M buffer memory
>          1302 M swap cache
>            99 M total swap
>             0 M used swap
>            99 M free swap
>
> Raspberry only:
> oom events: 0
> lifetime oom required: 0 Mbytes
> total time in oom handler: 0 ms
> max time spent in oom handler: 0 ms
>
> *** FAILED SERVICES ***
>
 >   UNIT LOAD ACTIVE SUB DESCRIPTION
> 0 loaded units listed.
>
m> *** FILESYSTEM ***
> Filesystem     Type      Size  Used Avail Use% Mounted on
> /dev/root      ext4      118G   23G   90G  21% /
> devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
> tmpfs          tmpfs     3.9G   16K  3.9G   1% /dev/shm
> tmpfs          tmpfs     1.6G  896K  1.6G   1% /run
> tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
> /dev/sdb1      exfat      29G  3.0G   26G  11% /mnt/usb0
> /dev/sda1      vfat      253M   50M  203M  20% /boot
> tmpfs          tmpfs     790M     0  790M   0% /run/user/1000
>
> Messages concerning ext4 filesystem in dmesg:
> [Sun Oct 15 11:35:23 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:FD:BB:CC vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=tty1 console=ttyS0,115200 root=PARTUUID=1045efe5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
> [Sun Oct 15 11:35:26 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
> [Sun Oct 15 11:35:26 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
> [Sun Oct 15 11:35:30 2023] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.
>
> Show mounted filesystems \(real ones only\):
> TARGET      SOURCE    FSTYPE OPTIONS
> /           /dev/sda2 ext4   rw,noatime
> |-/mnt/usb0 /dev/sdb1 exfat  rw,nosuid,nodev,noexec,relatime,fmask=0000,dmask=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro
> `-/boot     /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro
-bash: Skript: Kommando nicht gefunden.
iobroker [command]

Commands:
  iobroker setup                                               Setup ioBroker
  iobroker start [all|<adapter>.<instance>|<adapter>]          Starts the js-controller or a specified adapter instance or all instances of an adapter
  iobroker stop [<adapter>.<instance>|<adapter>]               stops the js-controller or a specified adapter instance or all instances of an adapter
  iobroker restart [<adapter>.<instance>|<adapter>]            Restarts js-controller or a specified adapter instance or all instances of an adapter  [aliases: r]
  iobroker debug <adapter>[.<instance>]                        Starts a Node.js debugging session for the adapter instance
  iobroker info                                                Shows the host info
  iobroker logs [<adapter>]                                    Monitor log
  iobroker add <adapter> [desiredNumber]                       Add instance of adapter  [aliases: a]
  iobroker install <adapter>                                   Installs a specified adapter  [aliases: i]
  iobroker rebuild [<module>]                                  Rebuild all native modules or path
  iobroker url <url> [<name>]                                  Install adapter from specified url, e.g. GitHub
  iobroker del <adapter>                                       Remove adapter and all instances from this host  [aliases: delete]
  iobroker del <adapter>.<instance>                            Remove adapter instance  [aliases: delete]
  iobroker update [<repositoryUrl>]                            Update repository and list adapters
  iobroker upgrade                                             Upgrade management
  iobroker upload [all|<adapter>]                              Upload management  [aliases: u]
  iobroker object                                              Object management  [aliases: o]
  iobroker state                                               State management  [aliases: s]
  iobroker message <adapter>[.instance] <command> [<message>]  Send message to adapter instance/s
  iobroker list <type> [<filter>]                              List all entries, like objects
  iobroker chmod <mode> <file>                                 Change file rights
  iobroker chown <user> <group> <file>                         Change file ownership
  iobroker touch <file>                                        Touch file
  iobroker rm <file>                                           Remove file
  iobroker file                                                File management
  iobroker user                                                User commands
  iobroker group                                               group management
  iobroker host <hostname>                                     Set host to given hostname
  iobroker set <adapter>.<instance>                            Change settings of adapter config
  iobroker license <license.file or license.text>              Update license by given file
  iobroker cert                                                Certificate management
  iobroker clean <yes>                                         Clears all objects and states
  iobroker backup                                              Create backup
  iobroker restore <backup name or path>                       Restore a specified backup
  iobroker validate <backup name or path>                      Validate a specified backup
  iobroker status [all|<adapter>.<instance>]                   Status of ioBroker or adapter instance  [aliases: isrun]
  iobroker repo [<name>]                                       Show repo information
  iobroker uuid                                                Show uuid of the installation  [aliases: id]
  iobroker unsetup                                             Reset license, installation secret and language
  iobroker fix                                                 Execute the installation fixer script, this updates your ioBroker installation
  iobroker multihost                                           Multihost management
  iobroker compact                                             compact group management
  iobroker plugin                                              Plugin management
  iobroker vendor <passphrase> [<vendor.json>]                 Update the vendor information using given passphrase
  iobroker version [<adapter>]                                 Show version of js-controller or specified adapter  [aliases: v]

Options:
  --help  Show help  [boolean]
-bash: Static: Kommando nicht gefunden.
-bash: Icon: Kommando nicht gefunden.
-bash: command substitution: Zeile 7: Syntaxfehler beim unerwarteten Symbol »(«
-bash: command substitution: Zeile 7: `  Operating System: Raspbian GNU/Linux 11 (bullseye)'
-bash: -/boot: Datei oder Verzeichnis nicht gefunden
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ Files in neuralgic directories:
-bash: Files: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ /var:
-bash: /var:: Datei oder Verzeichnis nicht gefunden
pi@raspberrypi4-iobroker:~ $ 4.7G    /var/
-bash: 4.7G: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 4.1G    /var/log
-bash: 4.1G: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 3.9G    /var/log/journal/ceda8666c83a44189d7d8b22875c3095
-bash: 3.9G: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 3.9G    /var/log/journal
-bash: 3.9G: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 485M    /var/lib
-bash: 485M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ Archived and active journals take up 3.8G in the file system.
-bash: Archived: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ /opt/iobroker/backups:
-bash: /opt/iobroker/backups:: Datei oder Verzeichnis nicht gefunden
pi@raspberrypi4-iobroker:~ $ 6.2G    /opt/iobroker/backups/
-bash: 6.2G: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ /opt/iobroker/iobroker-data:
-bash: /opt/iobroker/iobroker-data:: Datei oder Verzeichnis nicht gefunden
pi@raspberrypi4-iobroker:~ $ 881M    /opt/iobroker/iobroker-data/
-bash: 881M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 404M    /opt/iobroker/iobroker-data/history
-bash: 404M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 324M    /opt/iobroker/iobroker-data/files
-bash: 324M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 84M     /opt/iobroker/iobroker-data/backup-objects
-bash: 84M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 52M     /opt/iobroker/iobroker-data/files/javascript.admin
-bash: 52M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ The five largest files in iobroker-data are:
-bash: The: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
-bash: 35M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 25M     /opt/iobroker/iobroker-data/states.jsonl
-bash: 25M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
-bash: 21M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 19M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map
-bash: 19M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ 18M     /opt/iobroker/iobroker-data/objects.jsonl
-bash: 18M: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ USB-Devices by-id:
-bash: USB-Devices: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':
-bash: USB-Sticks: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ find: '/dev/serial/by-id/': No such file or directory
-bash: find:: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ *** NodeJS-Installation ***
iobroker [command]

Commands:
  iobroker setup                                               Setup ioBroker
  iobroker start [all|<adapter>.<instance>|<adapter>]          Starts the js-controller or a specified adapter instance or all instances of an adapter
  iobroker stop [<adapter>.<instance>|<adapter>]               stops the js-controller or a specified adapter instance or all instances of an adapter
  iobroker restart [<adapter>.<instance>|<adapter>]            Restarts js-controller or a specified adapter instance or all instances of an adapter  [aliases: r]
  iobroker debug <adapter>[.<instance>]                        Starts a Node.js debugging session for the adapter instance
  iobroker info                                                Shows the host info
  iobroker logs [<adapter>]                                    Monitor log
  iobroker add <adapter> [desiredNumber]                       Add instance of adapter  [aliases: a]
  iobroker install <adapter>                                   Installs a specified adapter  [aliases: i]
  iobroker rebuild [<module>]                                  Rebuild all native modules or path
  iobroker url <url> [<name>]                                  Install adapter from specified url, e.g. GitHub
  iobroker del <adapter>                                       Remove adapter and all instances from this host  [aliases: delete]
  iobroker del <adapter>.<instance>                            Remove adapter instance  [aliases: delete]
  iobroker update [<repositoryUrl>]                            Update repository and list adapters
  iobroker upgrade                                             Upgrade management
  iobroker upload [all|<adapter>]                              Upload management  [aliases: u]
  iobroker object                                              Object management  [aliases: o]
  iobroker state                                               State management  [aliases: s]
  iobroker message <adapter>[.instance] <command> [<message>]  Send message to adapter instance/s
  iobroker list <type> [<filter>]                              List all entries, like objects
  iobroker chmod <mode> <file>                                 Change file rights
  iobroker chown <user> <group> <file>                         Change file ownership
  iobroker touch <file>                                        Touch file
  iobroker rm <file>                                           Remove file
  iobroker file                                                File management
  iobroker user                                                User commands
  iobroker group                                               group management
  iobroker host <hostname>                                     Set host to given hostname
  iobroker set <adapter>.<instance>                            Change settings of adapter config
  iobroker license <license.file or license.text>              Update license by given file
  iobroker cert                                                Certificate management
  iobroker clean <yes>                                         Clears all objects and states
  iobroker backup                                              Create backup
  iobroker restore <backup name or path>                       Restore a specified backup
  iobroker validate <backup name or path>                      Validate a specified backup
  iobroker status [all|<adapter>.<instance>]                   Status of ioBroker or adapter instance  [aliases: isrun]
  iobroker repo [<name>]                                       Show repo information
  iobroker uuid                                                Show uuid of the installation  [aliases: id]
  iobroker unsetup                                             Reset license, installation secret and language
  iobroker fix                                                 Execute the installation fixer script, this updates your ioBroker installation
  iobroker multihost                                           Multihost management
  iobroker compact                                             compact group management
  iobroker plugin                                              Plugin management
  iobroker vendor <passphrase> [<vendor.json>]                 Update the vendor information using given passphrase
  iobroker version [<adapter>]                                 Show version of js-controller or specified adapter  [aliases: v]

Options:
  --help  Show help  [boolean]
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ /usr/bin/nodejs         v20.7.0
node:internal/modules/cjs/loader:1051
  throw err;
  ^

Error: Cannot find module '/home/pi/v20.7.0'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1048:15)
    at Module._load (node:internal/modules/cjs/loader:901:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:83:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v20.7.0
pi@raspberrypi4-iobroker:~ $ /usr/bin/node           v20.7.0
node:internal/modules/cjs/loader:1051
  throw err;
  ^

Error: Cannot find module '/home/pi/v20.7.0'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1048:15)
    at Module._load (node:internal/modules/cjs/loader:901:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:83:12)
    at node:internal/main/run_main_module:23:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v20.7.0
pi@raspberrypi4-iobroker:~ $ /usr/bin/npm            10.1.0
Unknown command: "10.1.0"

To see a list of supported npm commands, run:
  npm help
pi@raspberrypi4-iobroker:~ $ /usr/bin/npx            10.1.0
npm notice
npm notice New minor version of npm available! 10.1.0 -> 10.2.0
npm notice Changelog: https://github.com/npm/cli/releases/tag/v10.2.0
npm notice Run npm install -g npm@10.2.0 to update!
npm notice
npm ERR! code E404
npm ERR! 404 Not Found - GET https://registry.npmjs.org/10.1.0 - Not found
npm ERR! 404
npm ERR! 404  '10.1.0@*' is not in this registry.
npm ERR! 404
npm ERR! 404 Note that you can also install from a
npm ERR! 404 tarball, folder, http url, or git url.

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-10-15T13_03_33_846Z-debug-0.log
pi@raspberrypi4-iobroker:~ $ /usr/bin/corepack       0.19.0
Unknown Syntax Error: Command not found; did you mean one of:

  0. corepack -h
  1. corepack -v
  2. corepack enable [--install-directory #0] ...
  3. corepack disable [--install-directory #0] ...
  4. corepack hydrate [--activate] <fileName>
  5. corepack prepare [--activate] [--all] [--json] [-o,--output] ...

While running 0.19.0
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ nodejs:
-bash: nodejs:: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $   Installed: 20.7.0-1nodesource1
-bash: Installed:: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $   Candidate: 20.8.1-1nodesource1
-bash: Candidate:: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $   Version table:
-bash: Version: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.8.1-1nodesource1 500
-bash: 20.8.1-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.8.0-1nodesource1 500
-bash: 20.8.0-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $  *** 20.7.0-1nodesource1 500
iobroker [command]

Commands:
  iobroker setup                                               Setup ioBroker
  iobroker start [all|<adapter>.<instance>|<adapter>]          Starts the js-controller or a specified adapter instance or all instances of an adapter
  iobroker stop [<adapter>.<instance>|<adapter>]               stops the js-controller or a specified adapter instance or all instances of an adapter
  iobroker restart [<adapter>.<instance>|<adapter>]            Restarts js-controller or a specified adapter instance or all instances of an adapter  [aliases: r]
  iobroker debug <adapter>[.<instance>]                        Starts a Node.js debugging session for the adapter instance
  iobroker info                                                Shows the host info
  iobroker logs [<adapter>]                                    Monitor log
  iobroker add <adapter> [desiredNumber]                       Add instance of adapter  [aliases: a]
  iobroker install <adapter>                                   Installs a specified adapter  [aliases: i]
  iobroker rebuild [<module>]                                  Rebuild all native modules or path
  iobroker url <url> [<name>]                                  Install adapter from specified url, e.g. GitHub
  iobroker del <adapter>                                       Remove adapter and all instances from this host  [aliases: delete]
  iobroker del <adapter>.<instance>                            Remove adapter instance  [aliases: delete]
  iobroker update [<repositoryUrl>]                            Update repository and list adapters
  iobroker upgrade                                             Upgrade management
  iobroker upload [all|<adapter>]                              Upload management  [aliases: u]
  iobroker object                                              Object management  [aliases: o]
  iobroker state                                               State management  [aliases: s]
  iobroker message <adapter>[.instance] <command> [<message>]  Send message to adapter instance/s
  iobroker list <type> [<filter>]                              List all entries, like objects
  iobroker chmod <mode> <file>                                 Change file rights
  iobroker chown <user> <group> <file>                         Change file ownership
  iobroker touch <file>                                        Touch file
  iobroker rm <file>                                           Remove file
  iobroker file                                                File management
  iobroker user                                                User commands
  iobroker group                                               group management
  iobroker host <hostname>                                     Set host to given hostname
  iobroker set <adapter>.<instance>                            Change settings of adapter config
  iobroker license <license.file or license.text>              Update license by given file
  iobroker cert                                                Certificate management
  iobroker clean <yes>                                         Clears all objects and states
  iobroker backup                                              Create backup
  iobroker restore <backup name or path>                       Restore a specified backup
  iobroker validate <backup name or path>                      Validate a specified backup
  iobroker status [all|<adapter>.<instance>]                   Status of ioBroker or adapter instance  [aliases: isrun]
  iobroker repo [<name>]                                       Show repo information
  iobroker uuid                                                Show uuid of the installation  [aliases: id]
  iobroker unsetup                                             Reset license, installation secret and language
  iobroker fix                                                 Execute the installation fixer script, this updates your ioBroker installation
  iobroker multihost                                           Multihost management
  iobroker compact                                             compact group management
  iobroker plugin                                              Plugin management
  iobroker vendor <passphrase> [<vendor.json>]                 Update the vendor information using given passphrase
  iobroker version [<adapter>]                                 Show version of js-controller or specified adapter  [aliases: v]

Options:
  --help  Show help  [boolean]
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         100 /var/lib/dpkg/status
-bash: 100: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.6.1-1nodesource1 500
-bash: 20.6.1-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.6.0-1nodesource1 500
-bash: 20.6.0-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.5.1-1nodesource1 500
-bash: 20.5.1-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.5.0-1nodesource1 500
-bash: 20.5.0-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.4.0-1nodesource1 500
-bash: 20.4.0-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.3.1-1nodesource1 500
-bash: 20.3.1-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.3.0-1nodesource1 500
-bash: 20.3.0-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.2.0-1nodesource1 500
-bash: 20.2.0-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.1.0-1nodesource1 500
-bash: 20.1.0-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      20.0.0-1nodesource1 500
-bash: 20.0.0-1nodesource1: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $      12.22.12~dfsg-1~deb11u4 500
-bash: 12.22.12~dfsg-1~deb11u4: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $         500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
-bash: 500: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $
pi@raspberrypi4-iobroker:~ $ Temp directories causing npm8 problem: 0
-bash: Temp: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $ No problems detected
-bash: No: Kommando nicht gefunden.
pi@raspberrypi4-iobroker:~ $

======================= SUMMARY =======================
                        v.2023-10-10


   Static hostname: raspberrypi4-iobroker
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 5.15.61-v7l+
      Architecture: arm

Installation:           native
Kernel:                 armv7l
Userland:               armhf
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     150
Uncaught Rejection: Error: Objects DB is not allowed to start in the current Multihost environment
    at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-objects-redis/build/lib/objects/objectsInRedisClient.js:493:23)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v20.7.0
                        /usr/bin/node           v20.7.0
                        /usr/bin/npm            10.1.0
                        /usr/bin/npx            10.1.0
                        /usr/bin/corepack       0.19.0

Recommended versions are nodejs  Cannot determine Set feature status: Connection is closed.
 Connection is closed. and npm
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.9G        1.9G        4.6G        0.0K        1.4G        5.8G
Swap:            99M          0B         99M
Total:          8.0G        1.9G        4.7G

Uncaught Rejection: Error: States DB is not allowed to start in the current Multihost environment
    at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-states-redis/build/lib/states/statesInRedisClient.js:459:23)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
Active iob-Instances:   0
No connection to databases possible ...

Thomas Braun

@spidermike

Mach es nochmal.
Und auf Basis von nodejs@18.

Homoran

@spidermike wieso sind da so seltsam zeilen/zeichen mittendr7n?

Spidermike

@homoran sagte in ioBroker extrem langsam:

@spidermike wieso sind da so seltsam zeilen/zeichen mittendr7n?

keine ahnung hab es mit Putty laufen lassen und dann wollte ich es einfach nur kopieren und dann kam das raus :white_frowning_face:

haselchen

@spidermike

Vielleicht solltest Du auch mal die 150! Updates einspielen.....

Thomas Braun

@haselchen sagte in ioBroker extrem langsam:

Vielleicht solltest Du auch mal die 150! Updates einspielen.....

Das selbstverständlich auch.

Community Forum

NEWS

ioBroker extrem langsam

Support us

760

32.5k

81.6k

1.3m