inventwo Icon Set Adapter - updaten funktioniert nicht

[Glasfaser]

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

@djmarc75 ist es das, was ich noch tun muss, oder?
ich schiebe das schon eine zeitlang vor mich hin

das ist nur für den js.controller !!!!

[Glasfaser]

@djmarc75 sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:
scheint ja auch Steinzeit bei Dir zu sein

Jipp .. sieht bei @rtwl so aus

[DJMarc75]

@glasfaser sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Jipp .. sieht bei @rtwl so aus

bin sehr gespannt auf die Ausgabe von iob diag

[rtwl]

@glasfaser danke vorerst mal.
muss jetzt leider weg. Am Abend geht's für mich weiter. Dann kümmere ich mich darum, dass die Steinzeit verschwindet

[rtwl]

@djmarc75 wirst du dann am Abend bekommen

[Glasfaser]

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Dann kümmere ich mich darum, dass die Steinzeit verschwindet

Eine Full Ausgabe von

iob diag 

wäre schon vor deinem " kümmern " von Vorteil .!!!!

[rtwl]

@glasfaser sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Eine Full Ausgabe von
iob diag

Full Ausgabe von iob diag

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : armv7l
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 11:12:53 up 210 days, 18:35,  1 user,  load average: 1.34, 2.42, 1.42
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=64.2'C
volt=0.9160V

*** Time and Time Zones ***
               Local time: Sun 2023-08-13 11:12:53 CEST
           Universal time: Sun 2023-08-13 09:12:53 UTC
                 RTC time: n/a
                Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
rtwl
/home/rtwl
rtwl adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        924M        1.0G        0.0K        1.9G        3.0G
Swap:            99M        1.0M         98M
Total:          3.9G        925M        1.1G

         3838 M total memory
          924 M used memory
          698 M active memory
         1902 M inactive memory
         1044 M free memory
          140 M buffer memory
         1729 M swap cache
           99 M total swap
            1 M used swap
           98 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  5.9G  7.9G  43% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     768M  812K  767M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     384M     0  384M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Jan 14 15:37:17 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:75:F7:C5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=36a229aa-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Jan 14 15:37:18 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Jan 14 15:37:18 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Jan 14 15:37:20 2023] EXT4-fs (mmcblk0p2): recovery complete
[Sat Jan 14 15:37:20 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Jan 14 15:37:20 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Jan 14 15:37:23 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.1G    /var/
786M    /var/log
785M    /var/log/journal/ce513f1a44ff4c9dbd382eb66e08c51e
785M    /var/log/journal
144M    /var/cache

Archived and active journals take up 784.1M in the file system.

/opt/iobroker/backups:
131M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
967M    /opt/iobroker/iobroker-data/
484M    /opt/iobroker/iobroker-data/history
297M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/backup-objects
88M     /opt/iobroker/iobroker-data/files/echarts.admin

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map
17M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.1b04901d.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v14.19.0
/usr/bin/node           v14.19.0
/usr/bin/npm            6.14.16
/usr/bin/npx            6.14.16


nodejs:
  Installed: 14.19.0-deb-1nodesource1
  Candidate: 14.21.3-deb-1nodesource1
  Version table:
     14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x bullseye/main armhf Packages
 *** 14.19.0-deb-1nodesource1 100
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.23
admin:          6.4.1
javascript:     7.0.3

Adapters from github:   5

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : smarthome                                -  enabled
  system.adapter.alias-manager.0          : alias-manager         : smarthome                                -  enabled
+ system.adapter.backitup.0               : backitup              : smarthome                                -  enabled
+ system.adapter.bring.0                  : bring                 : smarthome                                -  enabled
  system.adapter.daswetter.0              : daswetter             : smarthome                                -  enabled
  system.adapter.discovery.0              : discovery             : smarthome                                - disabled
+ system.adapter.echarts.0                : echarts               : smarthome                                -  enabled
  system.adapter.flot.0                   : flot                  : smarthome                                -  enabled
+ system.adapter.harmony.0                : harmony               : smarthome                                -  enabled
+ system.adapter.history.0                : history               : smarthome                                -  enabled
  system.adapter.ical.0                   : ical                  : smarthome                                -  enabled
  system.adapter.ical.1                   : ical                  : smarthome                                -  enabled
+ system.adapter.javascript.0             : javascript            : smarthome                                -  enabled
  system.adapter.meteoalarm.0             : meteoalarm            : smarthome                                -  enabled
  system.adapter.meteoalarm.1             : meteoalarm            : smarthome                                -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : smarthome                                -  enabled
+ system.adapter.onkyo.0                  : onkyo                 : smarthome                                -  enabled
+ system.adapter.pushover.0               : pushover              : smarthome                                -  enabled
+ system.adapter.radar2.0                 : radar2                : smarthome                                -  enabled
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : smarthome                                -  enabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : smarthome                                -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : smarthome                                -  enabled
  system.adapter.uv-protect.0             : uv-protect            : smarthome                                -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : smarthome                                -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : smarthome                                -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : smarthome                                -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : smarthome                                -  enabled
  system.adapter.vis.0                    : vis                   : smarthome                                -  enabled
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.4.1
Adapter    "alexa2"       : 3.24.1   , installed 3.24.1
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bring"        : 1.8.1    , installed 1.8.1
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.23 [Updatable]
Adapter    "meteoalarm"   : 2.3.6    , installed 2.3.6
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "onkyo"        : 2.1.2    , installed 2.1.2
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "radar2"       : 2.0.7    , installed 2.0.7
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "shuttercontrol": 1.5.0   , installed 1.5.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "uv-protect"   : 0.4.0    , installed 0.4.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.94.0 [Updatable]
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        9374
States:         8189

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 https://deb.nodesource.com/node_14.x bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists...
Pending Updates: 171

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       135573713  14664/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       135570114  14274/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       135570107  14274/iobroker.js-c
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14394      542/sshd: /usr/sbin
tcp6       0      0 :::61991                :::*                    LISTEN      1001       135574694  14804/io.harmony.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       135569310  14302/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       135572259  14699/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          14396      542/sshd: /usr/sbin
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       135573576  14544/io.radar2.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13576      646/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        14341      397/avahi-daemon: r
udp        0      0 0.0.0.0:40819           0.0.0.0:*                           108        14343      397/avahi-daemon: r
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       135574695  14804/io.harmony.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       135571949  14452/io.shelly.0
udp6       0      0 :::5353                 :::*                                108        14342      397/avahi-daemon: r
udp6       0      0 :::50211                :::*                                108        14344      397/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-08-13 11:10:34.562  - info: sourceanalytix.0 (15142) Found 3 SourceAnalytix enabled states
2023-08-13 11:10:34.568  - info: sourceanalytix.0 (15142) Initialising (1 of 3) "shelly.0.SHPLG-S#9773DE#1.Relay0.Energy"
2023-08-13 11:10:34.678  - info: echarts.0 (15184) starting. Version 1.5.1 in /opt/iobroker/node_modules/iobroker.echarts, node: v14.19.0, js-controller: 4.0.23
2023-08-13 11:10:38.035  - info: sourceanalytix.0 (15142) Initialization of shelly.0.SHPLG-S#9773DE#1.Relay0.Energy successfully
2023-08-13 11:10:38.036  - info: sourceanalytix.0 (15142) Initialising (2 of 3) "shelly.0.SHPLG-S#8040D1#1.Relay0.Energy"
2023-08-13 11:10:42.120  - info: sourceanalytix.0 (15142) Initialization of shelly.0.SHPLG-S#8040D1#1.Relay0.Energy successfully
2023-08-13 11:10:42.121  - info: sourceanalytix.0 (15142) Initialising (3 of 3) "mqtt.0.SHRDZM.4C7525361F9E.4C7525361F9E.sensor.1.8.0"
2023-08-13 11:10:44.175  - info: sourceanalytix.0 (15142) Initialization of mqtt.0.SHRDZM.4C7525361F9E.4C7525361F9E.sensor.1.8.0 successfully
2023-08-13 11:10:44.200  - info: sourceanalytix.0 (15142) Successfully activated SourceAnalytix for 3 of 3 states, will do my Job until you stop me!
2023-08-13 11:11:34.098  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz history.0 alive läuft wieder
2023-08-13 11:11:36.252  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz pushover.0 alive läuft wieder
2023-08-13 11:11:38.323  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz shelly.0 alive läuft wieder
2023-08-13 11:11:44.249  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz radar2.0 alive läuft wieder
2023-08-13 11:11:52.951  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz alexa2.0 alive läuft wieder
2023-08-13 11:11:57.250  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz onkyo.0 alive läuft wieder
2023-08-13 11:11:58.491  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz mqtt.0 alive läuft wieder
2023-08-13 11:12:03.995  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz backitup.0 alive läuft wieder
2023-08-13 11:12:08.418  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz web.0 alive läuft wieder
2023-08-13 11:12:20.919  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz bring.0 alive läuft wieder
2023-08-13 11:12:24.431  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz vis-inventwo.0 alive läuft wieder
2023-08-13 11:12:25.641  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz harmony.0 alive läuft wieder
2023-08-13 11:12:26.182  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz trashschedule.0 alive läuft wieder
2023-08-13 11:12:37.922  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz shuttercontrol.0 alive läuft wieder
2023-08-13 11:13:04.441  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz sourceanalytix.0 alive läuft wieder
2023-08-13 11:13:04.785  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz echarts.0 alive läuft wieder



============ Mark until here for C&P =============

Summary von iob diag

======================= SUMMARY =======================
                    v.2023-04-16


Operatingsystem:        Raspbian GNU/Linux 11 (bullseye)
Kernel:                 5.10.92-v7l+
Installation:           Native
Timezone:               Europe/Vienna (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     171
Pending iob updates:    2

Nodejs-Installation:    /usr/bin/nodejs         v14.19.0
                       /usr/bin/node           v14.19.0
                       /usr/bin/npm            6.14.16
                       /usr/bin/npx            6.14.16

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:            3.8G        978M        989M        0.0K        1.9G        2.9G
Swap:            99M        1.0M         98M
Total:          3.9G        979M        1.1G

Active iob-Instances:   19
Active repo(s): stable

ioBroker Core:          js-controller           4.0.23
                       admin                   6.4.1

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                9374
States:                 8189

Size of iob-Database:

24M     /opt/iobroker/iobroker-data/objects.jsonl
9.6M    /opt/iobroker/iobroker-data/objects.json.migrated
9.6M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
3.9M    /opt/iobroker/iobroker-data/states.jsonl
1.2M    /opt/iobroker/iobroker-data/states.json.migrated
1.2M    /opt/iobroker/iobroker-data/states.json.bak.migrated
0       /opt/iobroker/iobroker-data/states.json.broken



=================== END OF SUMMARY ====================

ich würde mich sehr über Hilfe freuen!

[Thomas Braun]

@rtwl

System auf Stand bringen.
171 Updates und nodejs auf die Empfehlung v18.

[rtwl]

@thomas-braun sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

System auf Stand bringen

Aufgrund der Anspielung auf meine "Steinzeit" wäre das auch mein Ziel.
aber wie fange ich damit am besten an? - Ich hab noch keine Erfahrung damit. Copy&Paste war auch der Zugang bei mir beim Aufsetzen von ioBroker.

[Thomas Braun]

@rtwl

System mit

sudo apt update
iob stop
sudo apt full-upgrade
sudo reboot

Wechsel auf nodejs18 nach meinem HowTo in meiner Signatur.

Oder du kannst auch probieren mit der Bera-Version von iob diag auf node18 zu kommen.

[rtwl]

@thomas-braun
ich hab irgendwo mal die Empfehlung bekommen nichts mit sudo einzugeben - keine Ahnung warum genau.

aber hier passt es wenn ich die 4 Schritte so mache? - ich will nur auf Nummer sicher gehen und bin dir sehr dankbar, dass du mir hilfst.

[Thomas Braun]

@rtwl

Das ist ja grundsätzlich richtig, sudo so selten wie möglich zu verwenden.

Mittels sudo bekommt man Zugriff auf das Kernsystem, das ist aber bei Updates/Upgrades natürlich erforderlich.

[rtwl]

@thomas-braun
alles klar, danke

Ich denke das wird einiges an Zeit in Anspruch nehmen (171 Updates...) daher gehts erst später weiter. Muss jetzt Essen fahren.

[rtwl]

@thomas-braun sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

System mit

• sudo apt update
• iob stop
• sudo apt full-upgrade
• sudo reboot

soeben hab ich diese Schritte gemacht.
was wäre jetzt mein nächster Schritt?

js-controller updaten laut der offiziellen Anleitung?

oder muss ich da vorab nochmal was machen?

[Glasfaser]

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

soeben hab ich diese Schritte gemacht.
was wäre jetzt mein nächster Schritt?

Zeigen ...

Full-Ausgabe von

iob diag

[rtwl]

@glasfaser

Full-Ausgabe

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
19:19:40 up 15 min,  1 user,  load average: 0.31, 0.33, 0.35
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=62.3'C
volt=0.9060V

*** Time and Time Zones ***
              Local time: Sun 2023-08-13 19:19:40 CEST
          Universal time: Sun 2023-08-13 17:19:40 UTC
                RTC time: n/a
               Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
             NTP service: active
         RTC in local TZ: no

*** User and Groups ***
rtwl
/home/rtwl
rtwl adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:            3.8G        1.0G        2.5G        0.0K        307M        3.0G
Swap:            99M          0B         99M
Total:          3.9G        1.0G        2.6G

        3794 M total memory
        1016 M used memory
         756 M active memory
         454 M inactive memory
        2470 M free memory
          43 M buffer memory
         263 M swap cache
          99 M total swap
           0 M used swap
          99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  5.8G  8.0G  42% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  804K  759M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Aug 13 19:03:46 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:75:F7:C5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=36a229aa-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Aug 13 19:03:47 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sun Aug 13 19:03:47 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sun Aug 13 19:03:50 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
1.2G    /var/
794M    /var/log
793M    /var/log/journal/ce513f1a44ff4c9dbd382eb66e08c51e
793M    /var/log/journal
144M    /var/cache

Archived and active journals take up 792.1M in the file system.

/opt/iobroker/backups:
131M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
978M    /opt/iobroker/iobroker-data/
485M    /opt/iobroker/iobroker-data/history
297M    /opt/iobroker/iobroker-data/files
139M    /opt/iobroker/iobroker-data/backup-objects
88M     /opt/iobroker/iobroker-data/files/echarts.admin

The five largest files in iobroker-data are:
36M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map
17M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.1b04901d.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v14.21.3
/usr/bin/node           v14.21.3
/usr/bin/npm            6.14.18
/usr/bin/npx            6.14.18


nodejs:
 Installed: 14.21.3-deb-1nodesource1
 Candidate: 14.21.3-deb-1nodesource1
 Version table:
*** 14.21.3-deb-1nodesource1 500
       500 https://deb.nodesource.com/node_14.x bullseye/main armhf Packages
       100 /var/lib/dpkg/status
    12.22.12~dfsg-1~deb11u4 500
       500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.23
admin:          6.4.1
javascript:     7.0.3

Adapters from github:   5

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : smarthome                                -  enabled
 system.adapter.alias-manager.0          : alias-manager         : smarthome                                -  enabled
+ system.adapter.backitup.0               : backitup              : smarthome                                -  enabled
+ system.adapter.bring.0                  : bring                 : smarthome                                -  enabled
 system.adapter.daswetter.0              : daswetter             : smarthome                                -  enabled
 system.adapter.discovery.0              : discovery             : smarthome                                - disabled
+ system.adapter.echarts.0                : echarts               : smarthome                                -  enabled
 system.adapter.flot.0                   : flot                  : smarthome                                -  enabled
+ system.adapter.harmony.0                : harmony               : smarthome                                -  enabled
+ system.adapter.history.0                : history               : smarthome                                -  enabled
 system.adapter.ical.0                   : ical                  : smarthome                                -  enabled
 system.adapter.ical.1                   : ical                  : smarthome                                -  enabled
+ system.adapter.javascript.0             : javascript            : smarthome                                -  enabled
 system.adapter.meteoalarm.0             : meteoalarm            : smarthome                                -  enabled
 system.adapter.meteoalarm.1             : meteoalarm            : smarthome                                -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
 system.adapter.netatmo-crawler.0        : netatmo-crawler       : smarthome                                -  enabled
+ system.adapter.onkyo.0                  : onkyo                 : smarthome                                -  enabled
+ system.adapter.pushover.0               : pushover              : smarthome                                -  enabled
+ system.adapter.radar2.0                 : radar2                : smarthome                                -  enabled
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : smarthome                                -  enabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : smarthome                                -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : smarthome                                -  enabled
 system.adapter.uv-protect.0             : uv-protect            : smarthome                                -  enabled
 system.adapter.vis-icontwo.0            : vis-icontwo           : smarthome                                -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : smarthome                                -  enabled
 system.adapter.vis-materialdesign.0     : vis-materialdesign    : smarthome                                -  enabled
 system.adapter.vis-timeandweather.0     : vis-timeandweather    : smarthome                                -  enabled
 system.adapter.vis.0                    : vis                   : smarthome                                -  enabled
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.4.1
Adapter    "alexa2"       : 3.24.1   , installed 3.24.1
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bring"        : 1.8.1    , installed 1.8.1
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.23 [Updatable]
Adapter    "meteoalarm"   : 2.3.6    , installed 2.3.6
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "onkyo"        : 2.1.2    , installed 2.1.2
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "radar2"       : 2.0.7    , installed 2.0.7
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "shuttercontrol": 1.5.0   , installed 1.5.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "uv-protect"   : 0.4.0    , installed 0.4.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.94.0 [Updatable]
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        9374
States:         8189

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_14.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12596      531/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       13074      871/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       15504      499/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       15497      499/iobroker.js-con
tcp6       0      0 :::61991                :::*                    LISTEN      1001       13277      1000/io.harmony.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          12598      531/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15661      610/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       13123      905/io.web.0
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       15839      793/io.radar2.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          1892       667/dhcpcd
udp        0      0 0.0.0.0:59618           0.0.0.0:*                           108        1769       392/avahi-daemon: r
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       13278      1000/io.harmony.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        1767       392/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       15105      761/io.shelly.0
udp6       0      0 :::39631                :::*                                108        1770       392/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        1768       392/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-08-13 19:07:11.340  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz shelly.0 alive läuft wieder
2023-08-13 19:07:12.571  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz radar2.0 alive läuft wieder
2023-08-13 19:07:23.619  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz onkyo.0 alive läuft wieder
2023-08-13 19:07:24.578  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz mqtt.0 alive läuft wieder
2023-08-13 19:07:29.300  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz backitup.0 alive läuft wieder
2023-08-13 19:07:31.221  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz web.0 alive läuft wieder
2023-08-13 19:07:40.972  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz bring.0 alive läuft wieder
2023-08-13 19:07:41.818  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz vis-inventwo.0 alive läuft wieder
2023-08-13 19:07:45.832  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz trashschedule.0 alive läuft wieder
2023-08-13 19:07:52.116  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz harmony.0 alive läuft wieder
2023-08-13 19:08:02.115  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz shuttercontrol.0 alive läuft wieder
2023-08-13 19:08:17.218  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz sourceanalytix.0 alive läuft wieder
2023-08-13 19:08:21.352  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz echarts.0 alive läuft wieder
2023-08-13 19:15:02.116  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Terrassen Fenster value: 100%
2023-08-13 19:15:07.196  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Küche value: 100%
2023-08-13 19:15:12.216  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Wäscheraum value: 100%
2023-08-13 19:15:12.231  - info: javascript.0 (686) script.js.Raffstores.Wäscheraum: geöffnet
2023-08-13 19:15:17.252  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Schrankraum value: 100%
2023-08-13 19:15:17.281  - info: javascript.0 (686) script.js.Raffstores.Schrankraum: geöffnet
2023-08-13 19:15:22.291  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Kinderzimmer value: 100%
2023-08-13 19:15:22.305  - info: javascript.0 (686) script.js.Raffstores.LindaZimmer: geöffnet
2023-08-13 19:15:27.311  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: IsabellZimmer value: 100%
2023-08-13 19:15:27.325  - info: javascript.0 (686) script.js.Raffstores.IsabellZimmer: geöffnet
2023-08-13 19:15:30.219  - info: javascript.0 (686) script.js.Raffstores.Küche: halb oben
2023-08-13 19:15:48.220  - info: javascript.0 (686) script.js.Raffstores.TerrassenFenster: halb geöffnet

Summary

======================= SUMMARY =======================
                    v.2023-04-16


Operatingsystem:        Raspbian GNU/Linux 11 (bullseye)
Kernel:                 6.1.21-v8+
Installation:           Native
Timezone:               Europe/Vienna (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     0
Pending iob updates:    2

Nodejs-Installation:    /usr/bin/nodejs         v14.21.3
                       /usr/bin/node           v14.21.3
                       /usr/bin/npm            6.14.18
                       /usr/bin/npx            6.14.18

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:            3.8G        1.0G        2.2G        0.0K        532M        3.0G
Swap:            99M          0B         99M
Total:          3.9G        1.0G        2.3G

Active iob-Instances:   19
Active repo(s): stable

ioBroker Core:          js-controller           4.0.23
                       admin                   6.4.1

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                9374
States:                 8189

Size of iob-Database:

36M     /opt/iobroker/iobroker-data/objects.jsonl
9.6M    /opt/iobroker/iobroker-data/objects.json.migrated
9.6M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
2.8M    /opt/iobroker/iobroker-data/states.jsonl
1.2M    /opt/iobroker/iobroker-data/states.json.migrated
1.2M    /opt/iobroker/iobroker-data/states.json.bak.migrated
0       /opt/iobroker/iobroker-data/states.json.broken



=================== END OF SUMMARY ====================

[Glasfaser]

@rtwl

Überflogen ... sieht gut aus .

Würde jetzt das wichtigste machen , den js-controller updaten .
Zuvor aber ein BACKUP !!

[Glasfaser]

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Adapter "admin" : 6.3.5 , installed 6.4.1

Was mich wundert ...
du bist in Stable und hast ein Uralte BETA Version vom Admin auf deinem System vorhanden !?

[rtwl]

@glasfaser sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Zuvor aber ein BACKUP

Reicht das tägliche Backup vom backitup Adapter?

@glasfaser sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

du bist in Stable und hast ein Uralte BETA Version vom Admin auf deinem System

Keine Ahnung, ich glaube ich hab mal ein BETA Installiert. Soll ich da vorher was ändern, bevor ich den js-controller update?

[Glasfaser]

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Reicht das tägliche Backup vom backitup Adapter?

NEIN ... immer vor einer Änderung / update / upgrade usw. erstellen !