inventwo Icon Set Adapter - updaten funktioniert nicht

DJMarc75

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

npm ERR! code ENOTSUP
npm ERR! notsup Unsupported engine for np@8.0.4: wanted: {"node":">=16.6.0","npm":">=7.19.0","git":">=2.11.0","yarn":">=1.7.0"} (current: {"node":"14.19.0","npm":"6.14.16"})
npm ERR! notsup Not compatible with your version of node/npm: np@8.0.4
npm ERR! notsup Not compatible with your version of node/npm: np@8.0.4
npm ERR! notsup Required: {"node":">=16.6.0","npm":">=7.19.0","git":">=2.11.0","yarn":">=1.7.0"}
npm ERR! notsup Actual:   {"npm":"6.14.16","node":"14.19.0"}

scheint ja auch Steinzeit bei Dir zu sein

rtwl

@djmarc75 ist es das, was ich noch tun muss, oder?
ich schiebe das schon eine zeitlang vor mich hin

Glasfaser

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

meinst du das:

Nee ....

mache mal :

iob stop
iob fix
iob start

dann

iob diag

Glasfaser

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

@djmarc75 ist es das, was ich noch tun muss, oder?
ich schiebe das schon eine zeitlang vor mich hin

das ist nur für den js.controller !!!!

Glasfaser

@djmarc75 sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:
scheint ja auch Steinzeit bei Dir zu sein

Jipp .. sieht bei @rtwl so aus

DJMarc75

@glasfaser sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Jipp .. sieht bei @rtwl so aus

bin sehr gespannt auf die Ausgabe von iob diag

rtwl

@glasfaser danke vorerst mal.
muss jetzt leider weg. Am Abend geht's für mich weiter. Dann kümmere ich mich darum, dass die Steinzeit verschwindet

rtwl

@djmarc75 wirst du dann am Abend bekommen

Glasfaser

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Dann kümmere ich mich darum, dass die Steinzeit verschwindet

Eine Full Ausgabe von

iob diag

wäre schon vor deinem " kümmern " von Vorteil .!!!!

rtwl

@glasfaser sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

Eine Full Ausgabe von
iob diag


Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : armv7l
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 11:12:53 up 210 days, 18:35,  1 user,  load average: 1.34, 2.42, 1.42
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=64.2'C
volt=0.9160V

*** Time and Time Zones ***
               Local time: Sun 2023-08-13 11:12:53 CEST
           Universal time: Sun 2023-08-13 09:12:53 UTC
                 RTC time: n/a
                Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
rtwl
/home/rtwl
rtwl adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        924M        1.0G        0.0K        1.9G        3.0G
Swap:            99M        1.0M         98M
Total:          3.9G        925M        1.1G

         3838 M total memory
          924 M used memory
          698 M active memory
         1902 M inactive memory
         1044 M free memory
          140 M buffer memory
         1729 M swap cache
           99 M total swap
            1 M used swap
           98 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  5.9G  7.9G  43% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     768M  812K  767M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     384M     0  384M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Jan 14 15:37:17 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:75:F7:C5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=36a229aa-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Jan 14 15:37:18 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Jan 14 15:37:18 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Jan 14 15:37:20 2023] EXT4-fs (mmcblk0p2): recovery complete
[Sat Jan 14 15:37:20 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Jan 14 15:37:20 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Jan 14 15:37:23 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.1G    /var/
786M    /var/log
785M    /var/log/journal/ce513f1a44ff4c9dbd382eb66e08c51e
785M    /var/log/journal
144M    /var/cache

Archived and active journals take up 784.1M in the file system.

/opt/iobroker/backups:
131M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
967M    /opt/iobroker/iobroker-data/
484M    /opt/iobroker/iobroker-data/history
297M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/backup-objects
88M     /opt/iobroker/iobroker-data/files/echarts.admin

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map
17M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.1b04901d.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v14.19.0
/usr/bin/node           v14.19.0
/usr/bin/npm            6.14.16
/usr/bin/npx            6.14.16


nodejs:
  Installed: 14.19.0-deb-1nodesource1
  Candidate: 14.21.3-deb-1nodesource1
  Version table:
     14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x bullseye/main armhf Packages
 *** 14.19.0-deb-1nodesource1 100
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.23
admin:          6.4.1
javascript:     7.0.3

Adapters from github:   5

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : smarthome                                -  enabled
  system.adapter.alias-manager.0          : alias-manager         : smarthome                                -  enabled
+ system.adapter.backitup.0               : backitup              : smarthome                                -  enabled
+ system.adapter.bring.0                  : bring                 : smarthome                                -  enabled
  system.adapter.daswetter.0              : daswetter             : smarthome                                -  enabled
  system.adapter.discovery.0              : discovery             : smarthome                                - disabled
+ system.adapter.echarts.0                : echarts               : smarthome                                -  enabled
  system.adapter.flot.0                   : flot                  : smarthome                                -  enabled
+ system.adapter.harmony.0                : harmony               : smarthome                                -  enabled
+ system.adapter.history.0                : history               : smarthome                                -  enabled
  system.adapter.ical.0                   : ical                  : smarthome                                -  enabled
  system.adapter.ical.1                   : ical                  : smarthome                                -  enabled
+ system.adapter.javascript.0             : javascript            : smarthome                                -  enabled
  system.adapter.meteoalarm.0             : meteoalarm            : smarthome                                -  enabled
  system.adapter.meteoalarm.1             : meteoalarm            : smarthome                                -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : smarthome                                -  enabled
+ system.adapter.onkyo.0                  : onkyo                 : smarthome                                -  enabled
+ system.adapter.pushover.0               : pushover              : smarthome                                -  enabled
+ system.adapter.radar2.0                 : radar2                : smarthome                                -  enabled
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : smarthome                                -  enabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : smarthome                                -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : smarthome                                -  enabled
  system.adapter.uv-protect.0             : uv-protect            : smarthome                                -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : smarthome                                -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : smarthome                                -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : smarthome                                -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : smarthome                                -  enabled
  system.adapter.vis.0                    : vis                   : smarthome                                -  enabled
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.4.1
Adapter    "alexa2"       : 3.24.1   , installed 3.24.1
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bring"        : 1.8.1    , installed 1.8.1
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.23 [Updatable]
Adapter    "meteoalarm"   : 2.3.6    , installed 2.3.6
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "onkyo"        : 2.1.2    , installed 2.1.2
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "radar2"       : 2.0.7    , installed 2.0.7
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "shuttercontrol": 1.5.0   , installed 1.5.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "uv-protect"   : 0.4.0    , installed 0.4.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.94.0 [Updatable]
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        9374
States:         8189

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 https://deb.nodesource.com/node_14.x bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists...
Pending Updates: 171

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       135573713  14664/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       135570114  14274/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       135570107  14274/iobroker.js-c
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14394      542/sshd: /usr/sbin
tcp6       0      0 :::61991                :::*                    LISTEN      1001       135574694  14804/io.harmony.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       135569310  14302/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       135572259  14699/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          14396      542/sshd: /usr/sbin
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       135573576  14544/io.radar2.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13576      646/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        14341      397/avahi-daemon: r
udp        0      0 0.0.0.0:40819           0.0.0.0:*                           108        14343      397/avahi-daemon: r
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       135574695  14804/io.harmony.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       135571949  14452/io.shelly.0
udp6       0      0 :::5353                 :::*                                108        14342      397/avahi-daemon: r
udp6       0      0 :::50211                :::*                                108        14344      397/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-08-13 11:10:34.562  - info: sourceanalytix.0 (15142) Found 3 SourceAnalytix enabled states
2023-08-13 11:10:34.568  - info: sourceanalytix.0 (15142) Initialising (1 of 3) "shelly.0.SHPLG-S#9773DE#1.Relay0.Energy"
2023-08-13 11:10:34.678  - info: echarts.0 (15184) starting. Version 1.5.1 in /opt/iobroker/node_modules/iobroker.echarts, node: v14.19.0, js-controller: 4.0.23
2023-08-13 11:10:38.035  - info: sourceanalytix.0 (15142) Initialization of shelly.0.SHPLG-S#9773DE#1.Relay0.Energy successfully
2023-08-13 11:10:38.036  - info: sourceanalytix.0 (15142) Initialising (2 of 3) "shelly.0.SHPLG-S#8040D1#1.Relay0.Energy"
2023-08-13 11:10:42.120  - info: sourceanalytix.0 (15142) Initialization of shelly.0.SHPLG-S#8040D1#1.Relay0.Energy successfully
2023-08-13 11:10:42.121  - info: sourceanalytix.0 (15142) Initialising (3 of 3) "mqtt.0.SHRDZM.4C7525361F9E.4C7525361F9E.sensor.1.8.0"
2023-08-13 11:10:44.175  - info: sourceanalytix.0 (15142) Initialization of mqtt.0.SHRDZM.4C7525361F9E.4C7525361F9E.sensor.1.8.0 successfully
2023-08-13 11:10:44.200  - info: sourceanalytix.0 (15142) Successfully activated SourceAnalytix for 3 of 3 states, will do my Job until you stop me!
2023-08-13 11:11:34.098  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz history.0 alive läuft wieder
2023-08-13 11:11:36.252  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz pushover.0 alive läuft wieder
2023-08-13 11:11:38.323  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz shelly.0 alive läuft wieder
2023-08-13 11:11:44.249  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz radar2.0 alive läuft wieder
2023-08-13 11:11:52.951  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz alexa2.0 alive läuft wieder
2023-08-13 11:11:57.250  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz onkyo.0 alive läuft wieder
2023-08-13 11:11:58.491  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz mqtt.0 alive läuft wieder
2023-08-13 11:12:03.995  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz backitup.0 alive läuft wieder
2023-08-13 11:12:08.418  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz web.0 alive läuft wieder
2023-08-13 11:12:20.919  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz bring.0 alive läuft wieder
2023-08-13 11:12:24.431  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz vis-inventwo.0 alive läuft wieder
2023-08-13 11:12:25.641  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz harmony.0 alive läuft wieder
2023-08-13 11:12:26.182  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz trashschedule.0 alive läuft wieder
2023-08-13 11:12:37.922  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz shuttercontrol.0 alive läuft wieder
2023-08-13 11:13:04.441  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz sourceanalytix.0 alive läuft wieder
2023-08-13 11:13:04.785  - info: javascript.0 (14325) script.js.common.Adapter_check: Instanz echarts.0 alive läuft wieder



============ Mark until here for C&P =============

======================= SUMMARY =======================
                    v.2023-04-16


Operatingsystem:        Raspbian GNU/Linux 11 (bullseye)
Kernel:                 5.10.92-v7l+
Installation:           Native
Timezone:               Europe/Vienna (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     171
Pending iob updates:    2

Nodejs-Installation:    /usr/bin/nodejs         v14.19.0
                       /usr/bin/node           v14.19.0
                       /usr/bin/npm            6.14.16
                       /usr/bin/npx            6.14.16

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:            3.8G        978M        989M        0.0K        1.9G        2.9G
Swap:            99M        1.0M         98M
Total:          3.9G        979M        1.1G

Active iob-Instances:   19
Active repo(s): stable

ioBroker Core:          js-controller           4.0.23
                       admin                   6.4.1

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                9374
States:                 8189

Size of iob-Database:

24M     /opt/iobroker/iobroker-data/objects.jsonl
9.6M    /opt/iobroker/iobroker-data/objects.json.migrated
9.6M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
3.9M    /opt/iobroker/iobroker-data/states.jsonl
1.2M    /opt/iobroker/iobroker-data/states.json.migrated
1.2M    /opt/iobroker/iobroker-data/states.json.bak.migrated
0       /opt/iobroker/iobroker-data/states.json.broken



=================== END OF SUMMARY ====================

ich würde mich sehr über Hilfe freuen!

Thomas Braun

@rtwl

System auf Stand bringen.
171 Updates und nodejs auf die Empfehlung v18.

rtwl

@thomas-braun sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

System auf Stand bringen

Aufgrund der Anspielung auf meine "Steinzeit" wäre das auch mein Ziel.
aber wie fange ich damit am besten an? - Ich hab noch keine Erfahrung damit. Copy&Paste war auch der Zugang bei mir beim Aufsetzen von ioBroker.

Thomas Braun

@rtwl

System mit

sudo apt update
iob stop
sudo apt full-upgrade
sudo reboot

Wechsel auf nodejs18 nach meinem HowTo in meiner Signatur.

Oder du kannst auch probieren mit der Bera-Version von iob diag auf node18 zu kommen.

rtwl

@thomas-braun
ich hab irgendwo mal die Empfehlung bekommen nichts mit sudo einzugeben - keine Ahnung warum genau.

aber hier passt es wenn ich die 4 Schritte so mache? - ich will nur auf Nummer sicher gehen und bin dir sehr dankbar, dass du mir hilfst.

Thomas Braun

@rtwl

Das ist ja grundsätzlich richtig, sudo so selten wie möglich zu verwenden.

Mittels sudo bekommt man Zugriff auf das Kernsystem, das ist aber bei Updates/Upgrades natürlich erforderlich.

rtwl

@thomas-braun
alles klar, danke

Ich denke das wird einiges an Zeit in Anspruch nehmen (171 Updates...) daher gehts erst später weiter. Muss jetzt Essen fahren.

rtwl

@thomas-braun sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

System mit

sudo apt update

iob stop

sudo apt full-upgrade

sudo reboot

soeben hab ich diese Schritte gemacht.
was wäre jetzt mein nächster Schritt?

js-controller updaten laut der offiziellen Anleitung?

oder muss ich da vorab nochmal was machen?

Glasfaser

@rtwl sagte in inventwo Icon Set Adapter - updaten funktioniert nicht:

soeben hab ich diese Schritte gemacht.
was wäre jetzt mein nächster Schritt?

Zeigen ...

Full-Ausgabe von

iob diag

rtwl

@glasfaser

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
19:19:40 up 15 min,  1 user,  load average: 0.31, 0.33, 0.35
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=62.3'C
volt=0.9060V

*** Time and Time Zones ***
              Local time: Sun 2023-08-13 19:19:40 CEST
          Universal time: Sun 2023-08-13 17:19:40 UTC
                RTC time: n/a
               Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
             NTP service: active
         RTC in local TZ: no

*** User and Groups ***
rtwl
/home/rtwl
rtwl adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:            3.8G        1.0G        2.5G        0.0K        307M        3.0G
Swap:            99M          0B         99M
Total:          3.9G        1.0G        2.6G

        3794 M total memory
        1016 M used memory
         756 M active memory
         454 M inactive memory
        2470 M free memory
          43 M buffer memory
         263 M swap cache
          99 M total swap
           0 M used swap
          99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  5.8G  8.0G  42% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  804K  759M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Aug 13 19:03:46 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:75:F7:C5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=36a229aa-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Aug 13 19:03:47 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sun Aug 13 19:03:47 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sun Aug 13 19:03:50 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
1.2G    /var/
794M    /var/log
793M    /var/log/journal/ce513f1a44ff4c9dbd382eb66e08c51e
793M    /var/log/journal
144M    /var/cache

Archived and active journals take up 792.1M in the file system.

/opt/iobroker/backups:
131M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
978M    /opt/iobroker/iobroker-data/
485M    /opt/iobroker/iobroker-data/history
297M    /opt/iobroker/iobroker-data/files
139M    /opt/iobroker/iobroker-data/backup-objects
88M     /opt/iobroker/iobroker-data/files/echarts.admin

The five largest files in iobroker-data are:
36M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map
17M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.1b04901d.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v14.21.3
/usr/bin/node           v14.21.3
/usr/bin/npm            6.14.18
/usr/bin/npx            6.14.18


nodejs:
 Installed: 14.21.3-deb-1nodesource1
 Candidate: 14.21.3-deb-1nodesource1
 Version table:
*** 14.21.3-deb-1nodesource1 500
       500 https://deb.nodesource.com/node_14.x bullseye/main armhf Packages
       100 /var/lib/dpkg/status
    12.22.12~dfsg-1~deb11u4 500
       500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.23
admin:          6.4.1
javascript:     7.0.3

Adapters from github:   5

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : smarthome                                -  enabled
 system.adapter.alias-manager.0          : alias-manager         : smarthome                                -  enabled
+ system.adapter.backitup.0               : backitup              : smarthome                                -  enabled
+ system.adapter.bring.0                  : bring                 : smarthome                                -  enabled
 system.adapter.daswetter.0              : daswetter             : smarthome                                -  enabled
 system.adapter.discovery.0              : discovery             : smarthome                                - disabled
+ system.adapter.echarts.0                : echarts               : smarthome                                -  enabled
 system.adapter.flot.0                   : flot                  : smarthome                                -  enabled
+ system.adapter.harmony.0                : harmony               : smarthome                                -  enabled
+ system.adapter.history.0                : history               : smarthome                                -  enabled
 system.adapter.ical.0                   : ical                  : smarthome                                -  enabled
 system.adapter.ical.1                   : ical                  : smarthome                                -  enabled
+ system.adapter.javascript.0             : javascript            : smarthome                                -  enabled
 system.adapter.meteoalarm.0             : meteoalarm            : smarthome                                -  enabled
 system.adapter.meteoalarm.1             : meteoalarm            : smarthome                                -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
 system.adapter.netatmo-crawler.0        : netatmo-crawler       : smarthome                                -  enabled
+ system.adapter.onkyo.0                  : onkyo                 : smarthome                                -  enabled
+ system.adapter.pushover.0               : pushover              : smarthome                                -  enabled
+ system.adapter.radar2.0                 : radar2                : smarthome                                -  enabled
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : smarthome                                -  enabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : smarthome                                -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : smarthome                                -  enabled
 system.adapter.uv-protect.0             : uv-protect            : smarthome                                -  enabled
 system.adapter.vis-icontwo.0            : vis-icontwo           : smarthome                                -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : smarthome                                -  enabled
 system.adapter.vis-materialdesign.0     : vis-materialdesign    : smarthome                                -  enabled
 system.adapter.vis-timeandweather.0     : vis-timeandweather    : smarthome                                -  enabled
 system.adapter.vis.0                    : vis                   : smarthome                                -  enabled
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : smarthome                                -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.4.1
Adapter    "alexa2"       : 3.24.1   , installed 3.24.1
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bring"        : 1.8.1    , installed 1.8.1
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.23 [Updatable]
Adapter    "meteoalarm"   : 2.3.6    , installed 2.3.6
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "onkyo"        : 2.1.2    , installed 2.1.2
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "radar2"       : 2.0.7    , installed 2.0.7
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "shuttercontrol": 1.5.0   , installed 1.5.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "uv-protect"   : 0.4.0    , installed 0.4.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.94.0 [Updatable]
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        9374
States:         8189

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_14.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12596      531/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       13074      871/io.mqtt.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       15504      499/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       15497      499/iobroker.js-con
tcp6       0      0 :::61991                :::*                    LISTEN      1001       13277      1000/io.harmony.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          12598      531/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15661      610/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       13123      905/io.web.0
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       15839      793/io.radar2.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          1892       667/dhcpcd
udp        0      0 0.0.0.0:59618           0.0.0.0:*                           108        1769       392/avahi-daemon: r
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       13278      1000/io.harmony.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        1767       392/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       15105      761/io.shelly.0
udp6       0      0 :::39631                :::*                                108        1770       392/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        1768       392/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-08-13 19:07:11.340  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz shelly.0 alive läuft wieder
2023-08-13 19:07:12.571  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz radar2.0 alive läuft wieder
2023-08-13 19:07:23.619  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz onkyo.0 alive läuft wieder
2023-08-13 19:07:24.578  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz mqtt.0 alive läuft wieder
2023-08-13 19:07:29.300  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz backitup.0 alive läuft wieder
2023-08-13 19:07:31.221  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz web.0 alive läuft wieder
2023-08-13 19:07:40.972  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz bring.0 alive läuft wieder
2023-08-13 19:07:41.818  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz vis-inventwo.0 alive läuft wieder
2023-08-13 19:07:45.832  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz trashschedule.0 alive läuft wieder
2023-08-13 19:07:52.116  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz harmony.0 alive läuft wieder
2023-08-13 19:08:02.115  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz shuttercontrol.0 alive läuft wieder
2023-08-13 19:08:17.218  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz sourceanalytix.0 alive läuft wieder
2023-08-13 19:08:21.352  - info: javascript.0 (686) script.js.common.Adapter_check: Instanz echarts.0 alive läuft wieder
2023-08-13 19:15:02.116  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Terrassen Fenster value: 100%
2023-08-13 19:15:07.196  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Küche value: 100%
2023-08-13 19:15:12.216  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Wäscheraum value: 100%
2023-08-13 19:15:12.231  - info: javascript.0 (686) script.js.Raffstores.Wäscheraum: geöffnet
2023-08-13 19:15:17.252  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Schrankraum value: 100%
2023-08-13 19:15:17.281  - info: javascript.0 (686) script.js.Raffstores.Schrankraum: geöffnet
2023-08-13 19:15:22.291  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: Kinderzimmer value: 100%
2023-08-13 19:15:22.305  - info: javascript.0 (686) script.js.Raffstores.LindaZimmer: geöffnet
2023-08-13 19:15:27.311  - info: shuttercontrol.0 (1048) Sunprotect #422 Set ID: IsabellZimmer value: 100%
2023-08-13 19:15:27.325  - info: javascript.0 (686) script.js.Raffstores.IsabellZimmer: geöffnet
2023-08-13 19:15:30.219  - info: javascript.0 (686) script.js.Raffstores.Küche: halb oben
2023-08-13 19:15:48.220  - info: javascript.0 (686) script.js.Raffstores.TerrassenFenster: halb geöffnet

======================= SUMMARY =======================
                    v.2023-04-16


Operatingsystem:        Raspbian GNU/Linux 11 (bullseye)
Kernel:                 6.1.21-v8+
Installation:           Native
Timezone:               Europe/Vienna (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     0
Pending iob updates:    2

Nodejs-Installation:    /usr/bin/nodejs         v14.21.3
                       /usr/bin/node           v14.21.3
                       /usr/bin/npm            6.14.18
                       /usr/bin/npx            6.14.18

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:            3.8G        1.0G        2.2G        0.0K        532M        3.0G
Swap:            99M          0B         99M
Total:          3.9G        1.0G        2.3G

Active iob-Instances:   19
Active repo(s): stable

ioBroker Core:          js-controller           4.0.23
                       admin                   6.4.1

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                9374
States:                 8189

Size of iob-Database:

36M     /opt/iobroker/iobroker-data/objects.jsonl
9.6M    /opt/iobroker/iobroker-data/objects.json.migrated
9.6M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
2.8M    /opt/iobroker/iobroker-data/states.jsonl
1.2M    /opt/iobroker/iobroker-data/states.json.migrated
1.2M    /opt/iobroker/iobroker-data/states.json.bak.migrated
0       /opt/iobroker/iobroker-data/states.json.broken



=================== END OF SUMMARY ====================

Glasfaser

@rtwl

Überflogen ... sieht gut aus .

Würde jetzt das wichtigste machen , den js-controller updaten .
Zuvor aber ein BACKUP !!

NEWS

inventwo Icon Set Adapter - updaten funktioniert nicht

Support us

686
Online

32.1k
Users

80.6k
Topics

1.3m
Posts

NEWS

inventwo Icon Set Adapter - updaten funktioniert nicht

Support us

686Online

32.1kUsers

80.6kTopics

1.3mPosts

686
Online

32.1k
Users

80.6k
Topics

1.3m
Posts