ioBroker aktualisiert Homematic Datenpunkte nicht mehr

[ticaki]

@menuchim

Kürze mal hier das log https://forum.iobroker.net/post/1020369

@Homoran kann diesen Thread nicht mehr öffnen und dir nicht ordentlich helfen.

[Menuchim]

@bahnuhr

Vielen Dank für deine Rückmeldung.

Habe tatsächlich in den Konfigs der beiden Adapter einige Böcke drin gehabt.
Habe diese nun gefixt und alles läuft und synchronisiert sich wunderbar.

Nun muss ich nur noch verhindern, dass mein ioBroker alle naselang ne neue IP Adresse von meinem NAS bekommt, aber das ist ein anderes Problem.

Vielen Dank an alle, die mir ihre Hilfe angeboten haben.

Thread kann hiermit geschlossen werden.

[Homoran]

@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

dass mein ioBroker alle naselang ne neue IP Adresse von meinem NAS bekommt,

wieso vom Nas?
nicht von der Fritzbox oder was auch immer du als Router nutzst?

[Menuchim]

@homoran

weil der ioBroker auf der Docking Station meines NAS läuft bzw. darüber "veröffentlicht" wird.

Aber ja, du hast recht. Ich habe mich falsch ausgedrückt. Warum auch immer startet mein NAS die Docking Station dann und wann neu.
Bei so einem Neustart bekommt der ioBroker vom Router dann eine neue IP zugewiesen. Das nervt etwas.

Das Problem hat sich nun allerdings von selbst erledigt, da ich ein js.controller Update gemacht habe/machen musste und leider habe ich bei dem Update etwas falsch gemacht und mir den "alten" ioBroker zerschossen und weil ich beim Neuaufsetzen den Entrypunkt nicht gesetzt habe, habe ich nun einen frischen ioBroker. Immerhin hat er nun immer die gleiche IP.

Nun habe ich allerdings ein neues Problem. Dieser frische ioBroker kann zwar die Homematic-Geräte einlesen, aber er bekommt nicht zu jedem Gerät die Datenpunkte. Warum, habe ich ehrlich gesagt noch nicht herausgefunden. Bin strikt nach Doku vorgegangen beim einrichten der Adapter.

[Homoran]

@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

Bei so einem Neustart bekommt der ioBroker vom Router dann eine neue IP zugewiesen.

dann pinne doch die IP auf dem Router an die MAC des iobroker fest

[Homoran]

@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

Dieser frische ioBroker kann zwar die Homematic-Geräte einlesen, aber er bekommt nicht zu jedem Gerät die Datenpunkte. Warum, habe ich ehrlich gesagt noch nicht herausgefunden. Bin strikt nach Doku vorgegangen beim einrichten der Adapter.

schalt mal in den Instanzen sentry ab.
wenn das nicht hilft, bitte neuen Thread

[oFbEQnpoLKKl6mbY5e13]

@homoran sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

Bei so einem Neustart bekommt der ioBroker vom Router dann eine neue IP zugewiesen.

dann pinne doch die IP auf dem Router an die MAC des iobroker fest

Oder man stellt den Container in der Container Station gleich so ein, dass er eine feste IP bekommt.

[Menuchim]

@ofbeqnpolkkl6mby5e13 @Homoran

habe nun bei beiden genau das gemacht - fixe IP zugewiesen.

[Menuchim]

@homoran

wie genau mache ich das?

[Homoran]

@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

@homoran

wie genau mache ich das?

instanzen -> Expertenmodus -> hm-rpc -> sentry deaktivieren

[Menuchim]

@homoran said in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

Dieser frische ioBroker kann zwar die Homematic-Geräte einlesen, aber er bekommt nicht zu jedem Gerät die Datenpunkte. Warum, habe ich ehrlich gesagt noch nicht herausgefunden. Bin strikt nach Doku vorgegangen beim einrichten der Adapter.

schalt mal in den Instanzen sentry ab.
wenn das nicht hilft, bitte neuen Thread

habs gefunden, hat nur leider nichts gebracht. Oder muss das für hm-rega auch abgeschaltet werden?

[Homoran]

@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

hat nur leider nichts gebrach

@homoran sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

wenn das nicht hilft, bitte neuen Thread

[oFbEQnpoLKKl6mbY5e13]

@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

@ofbeqnpolkkl6mby5e13 @Homoran

habe nun bei beiden genau das gemacht - fixe IP zugewiesen.

Übliche Praxis ist es, nicht den gesamten IP-Adressbereich für DHCP zu verwenden, sondern z. B. von vorne oder hinten 20-30 Adressen für fest zugewiesene IPs freizulassen. Dann braucht man auch in DHCP keine Zuweisungen in der Form machen, dass bestimmten MAC-Adressen immer dieselben IP-Adressen zugewiesen werden.

[markus-now]

Auch von mir ein Hallo in die Runde,
ich habe ein änliches problem, es wird alles synchronisiert bis auf die Objekt-Namen. Ich habe schon mehrere Neuinstallationen von ioBroker, CCU, hm-rpc, hm-rega.

Das Problem tauchte aber erst nach einem Backup auf ein neu installiertes 64Bit System und das iobroker Backup war von dem 32Bit System.

Bekomme immer diese Fehlermeldung.

Kann mir bitte jemand weiter helfen, ich habe keine Idee mehr?

ioBroker:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1800 MHz
Modell: Cortex-A72
RAM: 7.6 GB
System-Betriebszeit: 00:04:18
Node.js: v18.17.0
time: 1690967161861
Adapter-Anzahl: 485
NPM: 9.6.7
Datenträgergröße: 1833.6 GB
Freier Festplattenspeicher: 1827.3 GB
Betriebszeit: 00:03:15

iob diag

[Link Text](======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 12:49:32 up 43 min,  3 users,  load average: 1.04, 0.72, 0.66
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.5'C
volt=0.9060V

*** Time and Time Zones ***
               Local time: Wed 2023-08-02 12:49:32 CEST
           Universal time: Wed 2023-08-02 10:49:32 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
iobroker
/home/iobroker
iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.3G        4.6G         35M        945M        5.4G
Swap:            99M          0B         99M
Total:          7.9G        2.3G        4.7G

         7811 M total memory
         2252 M used memory
         2492 M active memory
          486 M inactive memory
         4613 M free memory
           93 M buffer memory
          852 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      1.8T  6.3G  1.8T   1% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     782M   20K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Aug  2 12:05:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Wed Aug  2 12:05:58 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Aug  2 12:05:58 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Wed Aug  2 12:06:04 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
766M    /var/
392M    /var/lib
209M    /var/lib/influxdb/engine
209M    /var/lib/influxdb
186M    /var/lib/influxdb/engine/data

Archived and active journals take up 96.0M in the file system.

/opt/iobroker/backups:
117M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
531M    /opt/iobroker/iobroker-data/
360M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/backup-objects
88M     /opt/iobroker/iobroker-data/files/echarts.admin
57M     /opt/iobroker/iobroker-data/files/echarts

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
23M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.0
/usr/bin/node           v18.17.0
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.0-deb-1nodesource1
  Candidate: 18.17.0-deb-1nodesource1
  Version table:
 *** 18.17.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.6.1
javascript:     7.0.3

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBrokerMaster                           -  enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin
+ system.adapter.alarm.0                  : alarm                 : ioBrokerMaster                           -  enabled
  system.adapter.alias-manager.0          : alias-manager         : ioBrokerMaster                           - disabled
+ system.adapter.backitup.0               : backitup              : ioBrokerMaster                           -  enabled
+ system.adapter.backitup.1               : backitup              : iob-slave1-Nowak-Automatisierung         -  enabled
  system.adapter.bshb.0                   : bshb                  : ioBrokerMaster                           - disabled
  system.adapter.device-reminder.0        : device-reminder       : ioBrokerMaster                           - disabled
  system.adapter.devices.0                : devices               : ioBrokerMaster                           - disabled
+ system.adapter.discovery.0              : discovery             : ioBrokerMaster                           -  enabled
+ system.adapter.doorbird.0               : doorbird              : ioBrokerMaster                           -  enabled
  system.adapter.dwd.0                    : dwd                   : ioBrokerMaster                           -  enabled
+ system.adapter.echarts.0                : echarts               : ioBrokerMaster                           -  enabled
  system.adapter.feiertage.0              : feiertage             : ioBrokerMaster                           -  enabled
  system.adapter.geofency.0               : geofency              : ioBrokerMaster                           - disabled, port: 7999, bind: 0.0.0.0
+ system.adapter.growatt.0                : growatt               : ioBrokerMaster                           -  enabled
+ system.adapter.harmony.0                : harmony               : ioBrokerMaster                           -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : ioBrokerMaster                           - disabled
  system.adapter.hm-rega.0                : hm-rega               : ioBrokerMaster                           - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : ioBrokerMaster                           - disabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : ioBrokerMaster                           - disabled, port: 0
+ system.adapter.hue.0                    : hue                   : ioBrokerMaster                           -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : ioBrokerMaster                           - disabled
+ system.adapter.influxdb.0               : influxdb              : ioBrokerMaster                           -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : ioBrokerMaster                           -  enabled
+ system.adapter.iot.0                    : iot                   : ioBrokerMaster                           -  enabled
+ system.adapter.jarvis.0                 : jarvis                : ioBrokerMaster                           -  enabled
+ system.adapter.javascript.0             : javascript            : ioBrokerMaster                           -  enabled
+ system.adapter.linkeddevices.0          : linkeddevices         : ioBrokerMaster                           -  enabled
  system.adapter.luftdaten.0              : luftdaten             : ioBrokerMaster                           -  enabled
  system.adapter.netatmo.0                : netatmo               : ioBrokerMaster                           - disabled
+ system.adapter.nina.0                   : nina                  : ioBrokerMaster                           -  enabled
  system.adapter.odl.0                    : odl                   : ioBrokerMaster                           -  enabled
  system.adapter.owfs.0                   : owfs                  : ioBrokerMaster                           - disabled, port: 4304
+ system.adapter.pollenflug.0             : pollenflug            : ioBrokerMaster                           -  enabled
  system.adapter.pvforecast.0             : pvforecast            : ioBrokerMaster                           - disabled
+ system.adapter.rpi2.0                   : rpi2                  : ioBrokerMaster                           -  enabled
+ system.adapter.rpi2.1                   : rpi2                  : iob-slave1-Nowak-Automatisierung         -  enabled
  system.adapter.sayit.0                  : sayit                 : ioBrokerMaster                           - disabled
+ system.adapter.scenes.0                 : scenes                : ioBrokerMaster                           -  enabled
+ system.adapter.shuttercontrol.0         : shuttercontrol        : ioBrokerMaster                           -  enabled
+ system.adapter.smartmeter.0             : smartmeter            : iob-slave1-Nowak-Automatisierung         -  enabled
+ system.adapter.sonos.0                  : sonos                 : ioBrokerMaster                           -  enabled
+ system.adapter.sony-bravia.0            : sony-bravia           : ioBrokerMaster                           -  enabled
+ system.adapter.sprinklecontrol.0        : sprinklecontrol       : ioBrokerMaster                           -  enabled
+ system.adapter.statistics.0             : statistics            : ioBrokerMaster                           -  enabled
  system.adapter.synology.0               : synology              : ioBrokerMaster                           - disabled, port: 5000
+ system.adapter.tankerkoenig.0           : tankerkoenig          : ioBrokerMaster                           -  enabled
+ system.adapter.telegram.0               : telegram              : ioBrokerMaster                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : ioBrokerMaster                           -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.tr-064.0                 : tr-064                : ioBrokerMaster                           - disabled
+ system.adapter.unifi.0                  : unifi                 : ioBrokerMaster                           -  enabled
+ system.adapter.web.0                    : web                   : ioBrokerMaster                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : ioBrokerMaster                           -  enabled
  system.adapter.yr.0                     : yr                    : ioBrokerMaster                           -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBrokerMaster                           -  enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin
+ system.adapter.hue.0                    : hue                   : ioBrokerMaster                           -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : ioBrokerMaster                           -  enabled, port: 8086
+ system.adapter.telegram.0               : telegram              : ioBrokerMaster                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : ioBrokerMaster                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : ioBrokerMaster                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.6.1
Adapter    "alarm"        : 3.3.12   , installed 3.3.12
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bshb"         : 0.2.4    , installed 0.2.4
Adapter    "device-reminder": 1.2.9  , installed 1.2.9
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "doorbird"     : 1.0.5    , installed 1.0.5
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "geofency"     : 1.2.4    , installed 1.2.4
Adapter    "growatt"      : 3.0.2    , installed 3.0.2
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "heatingcontrol": 2.10.6  , installed 2.10.6
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.18  , installed 1.15.18
Adapter    "hue"          : 3.9.3    , installed 3.9.3
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "iot"          : 1.14.5   , installed 1.14.5
Adapter    "jarvis"       : 3.1.2    , installed 3.1.2
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "linkeddevices": 1.5.5    , installed 1.5.5
Adapter    "luftdaten"    : 3.0.0    , installed 3.0.0
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "odl"          : 2.0.5    , installed 2.0.5
Adapter    "owfs"         : 0.7.0    , installed 0.7.0
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "pvforecast"   : 2.7.1    , installed 2.7.1
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shuttercontrol": 1.5.0   , installed 1.5.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sonos"        : 2.3.1    , installed 2.3.1
Adapter    "sony-bravia"  : 1.0.9    , installed 1.0.9
Adapter    "sprinklecontrol": 0.2.13 , installed 0.2.13
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "unifi"        : 0.6.6    , installed 0.6.6
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "yahka"        : 0.17.0   , installed 0.17.0
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        13437
States:         11537

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://repos.influxdata.com/debian bullseye InRelease
Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 1

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 172.36.0.10:9001        0.0.0.0:*               LISTEN      1000       19620      1301/iobroker.js-co
tcp        0      0 172.36.0.10:9000        0.0.0.0:*               LISTEN      1000       19627      1301/iobroker.js-co
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1000       20148      2402/io.jarvis.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14587      583/sshd: /usr/sbin
tcp        0      0 127.0.0.1:33917         0.0.0.0:*               LISTEN      1000       22669      3113/io.yahka.0
tcp        0      0 172.36.0.10:8100        0.0.0.0:*               LISTEN      1000       18939      2211/io.doorbird.0
tcp        0      0 172.36.0.10:8081        0.0.0.0:*               LISTEN      1000       20598      1901/io.admin.0
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          14605      572/cupsd
tcp6       0      0 :::61991                :::*                    LISTEN      1000       19027      2288/io.harmony.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          14589      583/sshd: /usr/sbin
tcp6       0      0 :::32841                :::*                    LISTEN      1000       21472      3113/io.yahka.0
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          14604      572/cupsd
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       22647      3098/io.web.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        17164      462/influxd
tcp6       0      0 :::3500                 :::*                    LISTEN      1000       20891      2092/io.sonos.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13790      456/dhcpcd
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1000       19028      2288/io.harmony.0
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          15687      607/cups-browsed
udp        0      0 0.0.0.0:50295           0.0.0.0:*                           108        13757      380/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13755      380/avahi-daemon: r
udp6       0      0 :::40019                :::*                                108        13758      380/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          16422      456/dhcpcd
udp6       0      0 :::5353                 :::*                                108        13756      380/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-08-02 12:09:17.111  - warn: tankerkoenig.0 (3071) Overrides is missing in config from station Esso Tankstelle. Please check your configuration or reconfigure the stations => edit station => save
2023-08-02 12:09:20.444  - info: host.ioBrokerMaster instance system.adapter.yahka.0 started with pid 3113
2023-08-02 12:10:00.306  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3181
2023-08-02 12:10:06.743  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 12:15:00.275  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3536
2023-08-02 12:15:06.898  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 12:20:00.313  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3908
2023-08-02 12:20:06.935  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 12:25:00.261  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 4263
2023-08-02 12:25:06.797  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 12:30:00.250  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 4618
2023-08-02 12:30:04.309  - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 started with pid 4633
2023-08-02 12:30:07.519  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 12:30:14.279  - warn: luftdaten.0 (4633) State "luftdaten.0.38240.timestamp" has no existing object, this might lead to an error in future versions
2023-08-02 12:30:14.869  - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR)
2023-08-02 12:35:00.229  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5007
2023-08-02 12:35:06.628  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 12:40:00.194  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5351
2023-08-02 12:40:06.759  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 12:40:34.074  - info: host.ioBrokerMaster instance system.adapter.odl.0 started with pid 5369
2023-08-02 12:40:40.108  - info: host.ioBrokerMaster instance system.adapter.odl.0 terminated with code 0 (NO_ERROR)
2023-08-02 12:45:00.232  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5729
2023-08-02 12:45:07.300  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 12:50:00.068  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 7529
2023-08-02 12:50:07.158  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

============ Mark until here for C&P =============

iob diag has finished.)

[Link Text](Copy text starting here:

======================= SUMMARY =======================
                     v.2023-04-16


Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 12:49:32 up 43 min,  3 users,  load average: 1.04, 0.72, 0.66
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.5'C
volt=0.9060V

*** Time and Time Zones ***
               Local time: Wed 2023-08-02 12:49:32 CEST
           Universal time: Wed 2023-08-02 10:49:32 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
iobroker
/home/iobroker
iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.3G        4.6G         35M        945M        5.4G
Swap:            99M          0B         99M
Total:          7.9G        2.3G        4.7G

         7811 M total memory
         2252 M used memory
         2492 M active memory
          486 M inactive memory
         4613 M free memory
           93 M buffer memory
          852 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      1.8T  6.3G  1.8T   1% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     782M   20K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Aug  2 12:05:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Wed Aug  2 12:05:58 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Aug  2 12:05:58 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Wed Aug  2 12:06:04 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
766M    /var/
392M    /var/lib
209M    /var/lib/influxdb/engine
209M    /var/lib/influxdb
186M    /var/lib/influxdb/engine/data

Archived and active journals take up 96.0M in the file system.

/opt/iobroker/backups:
117M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
531M    /opt/iobroker/iobroker-data/
360M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/backup-objects
88M     /opt/iobroker/iobroker-data/files/echarts.admin
57M     /opt/iobroker/iobroker-data/files/echarts

The Operatingsystem:    Debian GNU/Linux 11 (bullseye)
Kernel:                 6.1.21-v8+
Installation:           Native
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               true
Boot Target:            graphical.target

Pending OS-Updates:     1
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.17.0
                        /usr/bin/node           v18.17.0
                        /usr/bin/npm            9.6.7
                        /usr/bin/npx            9.6.7

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.4G        4.5G         35M        949M        5.3G
Swap:            99M          0B         99M
Total:          7.9G        2.4G        4.6G

Active iob-Instances:   34
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   6.6.1

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : ioBrokerMaster                           -  enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin
+ system.adapter.web.0                    : web                   : ioBrokerMaster                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                13437
States:                 11537

Size of iob-Database:

23M     /opt/iobroker/iobroker-data/objects.jsonl
13M     /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

iobroker@ioBrokerMaster:~ $ ======= Start marking the full check here =========
-bash: =======: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ ```

Skript v.2023-04-16

*** BASE SYSTEM ***
Model : Raspberry Pi 4 Model B Rev 1.4
Architecture : aarch64
Docker : false
Virtualization : none
Distributor ID: Debian
Description: Debian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
12:49:32 up 43 min, 3 users, load average: 1.04, 0.72, 0.66
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.5'C
volt=0.9060V

*** Time and Time Zones ***
Local time: Wed 2023-08-02 12:49:32 CEST
Universal time: Wed 2023-08-02 10:49:32 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no

*** User and Groups ***
iobroker
/home/iobroker
iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi

*** X-Server-Setup ***
X-Server: true
Desktop:
Terminal: tty
Boot Target: graphical.target

*** MEMORY ***
total used free shared buff/cache available
Mem: 7.8G 2.3G 4.6G 35M 945M 5.4G
Swap: 99M 0B 99M
Total: 7.9G 2.3G 4.7G

     7811 M total memory
     2252 M used memory
     2492 M active memory
      486 M inactive memory
     4613 M free memory
       93 M buffer memory
      852 M swap cache
       99 M total swap
        0 M used swap
       99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 1.8T 6.3G 1.8T 1% /
devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
/dev/sda1 vfat 255M 31M 225M 13% /boot
tmpfs tmpfs 782M 20K 782M 1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Aug 2 12:05:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Wed Aug 2 12:05:58 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Aug 2 12:05:58 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Wed Aug 2 12:06:04 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/sda2 ext4 rw,noatime
-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro -bash: Skript: Kommando nicht gefunden. -bash: Bookshelf: Kommando nicht gefunden. -bash: Model: Kommando nicht gefunden. -bash: Architecture: Kommando nicht gefunden. -bash: Docker: Kommando nicht gefunden. -bash: Virtualization: Kommando nicht gefunden. -bash: Distributor: Kommando nicht gefunden. -bash: command substitution: Zeile 10: Syntaxfehler beim unerwarteten Symbol »(« -bash: command substitution: Zeile 10: Description: Debian GNU/Linux 11 (bullseye)'
-bash: -/boot: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Files in neuralgic directories:
-bash: Files: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ /var:
-bash: /var:: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $ 766M /var/
-bash: 766M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 392M /var/lib
-bash: 392M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 209M /var/lib/influxdb/engine
-bash: 209M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 209M /var/lib/influxdb
-bash: 209M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 186M /var/lib/influxdb/engine/data
-bash: 186M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Archived and active journals take up 96.0M in the file system.
-bash: Archived: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ /opt/iobroker/backups:
-bash: /opt/iobroker/backups:: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $ 117M /opt/iobroker/backups/
-bash: 117M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ /opt/iobroker/iobroker-data:
-bash: /opt/iobroker/iobroker-data:: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $ 531M /opt/iobroker/iobroker-data/
-bash: 531M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 360M /opt/iobroker/iobroker-data/files
-bash: 360M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 138M /opt/iobroker/iobroker-data/backup-objects
-bash: 138M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 88M /opt/iobroker/iobroker-data/files/echarts.admin
-bash: 88M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 57M /opt/iobroker/iobroker-data/files/echarts
-bash: 57M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ The five largest files in iobroker-data are:
-bash: The: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
-bash: 35M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 23M /opt/iobroker/iobroker-data/objects.jsonl
-bash: 23M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
-bash: 23M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
-bash: 23M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map
-bash: 23M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** NodeJS-Installation ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ /usr/bin/nodejs v18.17.0
node:internal/modules/cjs/loader:1080
throw err;
^

Error: Cannot find module '/home/iobroker/v18.17.0'
at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
at Module._load (node:internal/modules/cjs/loader:922:27)
at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
at node:internal/main/run_main_module:23:47 {
code: 'MODULE_NOT_FOUND',
requireStack: []
}

Node.js v18.17.0
iobroker@ioBrokerMaster:~ $ /usr/bin/node v18.17.0
node:internal/modules/cjs/loader:1080
throw err;
^

Error: Cannot find module '/home/iobroker/v18.17.0'
at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
at Module._load (node:internal/modules/cjs/loader:922:27)
at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
at node:internal/main/run_main_module:23:47 {
code: 'MODULE_NOT_FOUND',
requireStack: []
}

Node.js v18.17.0
iobroker@ioBrokerMaster:~ $ /usr/bin/npm 9.6.7
Unknown command: "9.6.7"

To see a list of supported npm commands, run:
npm help
iobroker@ioBrokerMaster:~ $ /usr/bin/npx 9.6.7
npm ERR! code E404
npm ERR! 404 Not Found - GET https://registry.npmjs.org/9.6.7 - Not found
npm ERR! 404
npm ERR! 404 '9.6.7@*' is not in this registry.
npm ERR! 404
npm ERR! 404 Note that you can also install from a
npm ERR! 404 tarball, folder, http url, or git url.

npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-08-02T10_57_53_210Z-debug-0.log
iobroker@ioBrokerMaster:~ $
piobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ nodejs:
-bash: nodejs:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Installed: 18.17.0-deb-1nodesource1
-bash: Installed:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Candidate: 18.17.0-deb-1nodesource1
-bash: Candidate:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Version table:
-bash: Version: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ *** 18.17.0-deb-1nodesource1 500
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
-bash: 500: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 100 /var/lib/dpkg/status
-bash: 100: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 12.22.12~dfsg-1~deb11u4 500
-bash: 12.22.12~dfsg-1~deb11u4: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
-bash: 500: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 12.22.12~dfsg-1~deb11u3 500
-bash: 12.22.12~dfsg-1~deb11u3: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 500 http://deb.debian.org/debian bullseye/main arm64 Packages
-bash: 500: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
0iobroker@ioBrokerMaster:~ $ Temp directories causing npm8 problem: 0
-bash: Temp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ No problems detected
-bash: No: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** ioBroker-Installation ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
liobroker@ioBrokerMaster:~ $ ioBroker Status
-bash: ioBroker: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ iobroker is running on this host.
iobroker [command]

Commands:
iobroker setup Setup ioBroker
iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance
iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance
iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r]
iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance
iobroker info Shows the host info
iobroker logs [<adapter>] Monitor log
iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a]
iobroker install <adapter> Installs a specified adapter [aliases: i]
iobroker rebuild [<module>] Rebuild all native modules or path
iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub
iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete]
iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete]
iobroker update [<repositoryUrl>] Update repository and list adapters
iobroker upgrade Upgrade management
iobroker upload [all|<adapter>] Upload management [aliases: u]
iobroker object Object management [aliases: o]
iobroker state State management [aliases: s]
iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s
iobroker list <type> [<filter>] List all entries, like objects
iobroker chmod <mode> <file> Change file rights
iobroker chown <user> <group> <file> Change file ownership
iobroker touch <file> Touch file
iobroker rm <file> Remove file
iobroker file File management
iobroker user User commands
iobroker group group management
iobroker host <hostname> Set host to given hostname
iobroker set <adapter>.<instance> Change settings of adapter config
iobroker license <license.file or license.text> Update license by given file
iobroker cert Certificate management
iobroker clean <yes> Clears all objects and states
iobroker backup Create backup
iobroker restore <backup name or path> Restore a specified backup
iobroker validate <backup name or path> Validate a specified backup
iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun]
iobroker repo [<name>] Show repo information
iobroker uuid Show uuid of the installation [aliases: id]
iobroker unsetup Reset license, installation secret and language
iobroker fix Execute the installation fixer script, this updates your ioBroker installation
iobroker multihost Multihost management
iobroker compact compact group management
iobroker plugin Plugin management
iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v]

Options:
--help Show help [boolean]
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Objects type: jsonl
-bash: Objects: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ States type: jsonl
-bash: States: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ MULTIHOSTSERVICE/enabled: false
-bash: MULTIHOSTSERVICE/enabled:: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Core adapters versions
-bash: Core: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ js-controller: 4.0.24
-bash: js-controller:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ admin: 6.6.1
-bash: admin:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ javascript: 7.0.3
-bash: javascript:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Adapters from github: 0
-bash: Adapters: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Adapter State
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ + system.adapter.alarm.0 : alarm : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.alias-manager.0 : alias-manager : ioBrokerMaster - disabled
-bash: system.adapter.alias-manager.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.backitup.0 : backitup : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.backitup.1 : backitup : iob-slave1-Nowak-Automatisierung - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.bshb.0 : bshb : ioBrokerMaster - disabled
-bash: system.adapter.bshb.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.device-reminder.0 : device-reminder : ioBrokerMaster - disabled
-bash: system.adapter.device-reminder.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.devices.0 : devices : ioBrokerMaster - disabled
-bash: system.adapter.devices.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.discovery.0 : discovery : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.doorbird.0 : doorbird : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.dwd.0 : dwd : ioBrokerMaster - enabled
-bash: system.adapter.dwd.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.echarts.0 : echarts : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.feiertage.0 : feiertage : ioBrokerMaster - enabled
-bash: system.adapter.feiertage.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.geofency.0 : geofency : ioBrokerMaster - disabled, port: 7999, bind: 0.0.0.0
-bash: system.adapter.geofency.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.growatt.0 : growatt : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.harmony.0 : harmony : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.heatingcontrol.0 : heatingcontrol : ioBrokerMaster - disabled
-bash: system.adapter.heatingcontrol.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.hm-rega.0 : hm-rega : ioBrokerMaster - disabled
-bash: system.adapter.hm-rega.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - disabled, port: 0
-bash: system.adapter.hm-rpc.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - disabled, port: 0
-bash: system.adapter.hm-rpc.1: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.ical.0 : ical : ioBrokerMaster - disabled
-bash: system.adapter.ical.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.info.0 : info : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.iot.0 : iot : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.jarvis.0 : jarvis : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.javascript.0 : javascript : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.linkeddevices.0 : linkeddevices : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.luftdaten.0 : luftdaten : ioBrokerMaster - enabled
-bash: system.adapter.luftdaten.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.netatmo.0 : netatmo : ioBrokerMaster - disabled
-bash: system.adapter.netatmo.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.nina.0 : nina : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.odl.0 : odl : ioBrokerMaster - enabled
-bash: system.adapter.odl.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.owfs.0 : owfs : ioBrokerMaster - disabled, port: 4304
-bash: system.adapter.owfs.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.pollenflug.0 : pollenflug : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.pvforecast.0 : pvforecast : ioBrokerMaster - disabled
-bash: system.adapter.pvforecast.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.rpi2.0 : rpi2 : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.rpi2.1 : rpi2 : iob-slave1-Nowak-Automatisierung - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.sayit.0 : sayit : ioBrokerMaster - disabled
-bash: system.adapter.sayit.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.scenes.0 : scenes : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.shuttercontrol.0 : shuttercontrol : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.smartmeter.0 : smartmeter : iob-slave1-Nowak-Automatisierung - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.sonos.0 : sonos : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.sony-bravia.0 : sony-bravia : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.sprinklecontrol.0 : sprinklecontrol : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.statistics.0 : statistics : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.synology.0 : synology : ioBrokerMaster - disabled, port: 5000
-bash: system.adapter.synology.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.tankerkoenig.0 : tankerkoenig : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.tr-064.0 : tr-064 : ioBrokerMaster - disabled
-bash: system.adapter.tr-064.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.unifi.0 : unifi : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.yahka.0 : yahka : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.yr.0 : yr : ioBrokerMaster - enabled
-bash: system.adapter.yr.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ + instance is alive
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Enabled adapters with bindings
-bash: Enabled: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ ioBroker-Repositories
-bash: ioBroker-Repositories: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ stable : http://download.iobroker.net/sources-dist.json
-bash: stable: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ beta : http://download.iobroker.net/sources-dist-latest.json
-bash: beta: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Active repo(s): stable
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Installed ioBroker-Instances
-bash: Installed: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Used repository: stable
-bash: Used: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "admin" : 6.3.5 , installed 6.6.1
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "alarm" : 3.3.12 , installed 3.3.12
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "alias-manager": 1.2.4 , installed 1.2.4
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "backitup" : 2.6.23 , installed 2.6.23
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "bshb" : 0.2.4 , installed 0.2.4
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "device-reminder": 1.2.9 , installed 1.2.9
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "devices" : 1.1.5 , installed 1.1.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "discovery" : 3.1.0 , installed 3.1.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "doorbird" : 1.0.5 , installed 1.0.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "dwd" : 2.8.5 , installed 2.8.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "echarts" : 1.5.1 , installed 1.5.1
LISTEN 0 14605 572/cupsd
tcp6 -bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "feiertage" : 1.1.0 , installed 1.1.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "geofency" : 1.2.4 , installed 1.2.4
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "growatt" : 3.0.2 , installed 3.0.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "harmony" : 1.2.2 , installed 1.2.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "heatingcontrol": 2.10.6 , installed 2.10.6
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "hm-rega" : 3.0.46 , installed 3.0.46
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "hm-rpc" : 1.15.18 , installed 1.15.18
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "hue" : 3.9.3 , installed 3.9.3
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "ical" : 1.13.3 , installed 1.13.3
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "influxdb" : 3.2.0 , installed 3.2.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "info" : 1.9.26 , installed 1.9.26
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "iot" : 1.14.5 , installed 1.14.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "jarvis" : 3.1.2 , installed 3.1.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "javascript" : 7.0.3 , installed 7.0.3
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Controller "js-controller": 4.0.24 , installed 4.0.24
-bash: Controller: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "linkeddevices": 1.5.5 , installed 1.5.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "luftdaten" : 3.0.0 , installed 3.0.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "netatmo" : 3.1.0 , installed 3.1.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "nina" : 0.0.25 , installed 0.0.25
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "odl" : 2.0.5 , installed 2.0.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "owfs" : 0.7.0 , installed 0.7.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "pollenflug" : 1.0.6 , installed 1.0.6
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "pvforecast" : 2.7.1 , installed 2.7.1
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "rpi2" : 1.3.2 , installed 1.3.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "sayit" : 3.0.5 , installed 3.0.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "scenes" : 2.3.9 , installed 2.3.9
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "shuttercontrol": 1.5.0 , installed 1.5.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "simple-api" : 2.7.2 , installed 2.7.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "smartmeter" : 3.3.4 , installed 3.3.4
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "socketio" : 4.2.0 , installed 4.2.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "sonos" : 2.3.1 , installed 2.3.1
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "sony-bravia" : 1.0.9 , installed 1.0.9
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "statistics" : 2.3.0 , installed 2.3.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "synology" : 2.1.13 , installed 2.1.13
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "telegram" : 1.16.0 , installed 1.16.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "tr-064" : 4.2.18 , installed 4.2.18
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "unifi" : 0.6.6 , installed 0.6.6
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "web" : 4.3.0 , installed 4.3.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "ws" : 1.3.0 , installed 1.3.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "yahka" : 0.17.0 , installed 0.17.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "yr" : 5.3.0 , installed 5.3.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
:iobroker@ioBrokerMaster:~ $ Objects and States
-bash: Objects: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Please stand by - This may take a while
-bash: Please: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Objects: 13437
-bash: Objects:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ States: 11537
-bash: States:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** OS-Repositories and Updates ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:1 http://deb.debian.org/debian bullseye InRelease
-bash: Hit:1: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
-bash: Hit:2: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
-bash: Hit:3: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
-bash: Hit:4: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:5 https://repos.influxdata.com/debian bullseye InRelease
-bash: Hit:5: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
-bash: Hit:6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Reading package lists...
-bash: Reading: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Pending Updates: 1
-bash: Pending: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** Listening Ports ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Active Internet connections (only servers)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
-bash: Proto: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 172.36.0.10:9001 0.0.0.0:* LISTEN 1000 19620 1301/iobroker.js-co
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 172.36.0.10:9000 0.0.0.0:* LISTEN 1000 19627 1301/iobroker.js-co
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 20148 2402/io.jarvis.0
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14587 583/sshd: /usr/sbin
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 127.0.0.1:33917 0.0.0.0:* LISTEN 1000 22669 3113/io.yahka.0
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 172.36.0.10:8100 0.0.0.0:* LISTEN 1000 18939 2211/io.doorbird.0
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 172.36.0.10:8081 0.0.0.0:* LISTEN 1000 20598 1901/io.admin.0
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14605 572/cupsd
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::61991 :::* LISTEN 1000 19027 2288/io.harmony.0
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::22 :::* LISTEN 0 14589 583/sshd: /usr/sbin
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::32841 :::* LISTEN 1000 21472 3113/io.yahka.0
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 ::1:631 :::* LISTEN 0 14604 572/cupsd
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::8082 :::* LISTEN 1000 22647 3098/io.web.0
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::8086 :::* LISTEN 999 17164 462/influxd
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::3500 :::* LISTEN 1000 20891 2092/io.sonos.0
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13790 456/dhcpcd
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 19028 2288/io.harmony.0
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15687 607/cups-browsed
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:50295 0.0.0.0:* 108 13757 380/avahi-daemon: r
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13755 380/avahi-daemon: r
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp6 0 0 :::40019 :::* 108 13758 380/avahi-daemon: r
-bash: udp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp6 0 0 :::546 :::* 0 16422 456/dhcpcd
-bash: udp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp6 0 0 :::5353 :::* 108 13756 380/avahi-daemon: r
-bash: udp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** Log File - Last 25 Lines ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:09:17.111 - warn: tankerkoenig.0 (3071) Overrides is missing in config from station Esso Tankstelle. Please check your configuration or reconfigure the stations => edit station => save
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:09:20.444 - info: host.ioBrokerMaster instance system.adapter.yahka.0 started with pid 3113
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:10:00.306 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3181
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:10:06.743 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:15:00.275 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3536
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:15:06.898 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:20:00.313 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3908
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:20:06.935 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:25:00.261 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 4263
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:25:06.797 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:00.250 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 4618
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:04.309 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 started with pid 4633
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:07.519 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:14.279 - warn: luftdaten.0 (4633) State "luftdaten.0.38240.timestamp" has no existing object, this might lead to an error in future versions
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:14.869 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:35:00.229 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5007
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:35:06.628 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:40:00.194 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5351
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:40:06.759 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:40:34.074 - info: host.ioBrokerMaster instance system.adapter.odl.0 started with pid 5369
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:40:40.108 - info: host.ioBrokerMaster instance system.adapter.odl.0 terminated with code 0 (NO_ERROR)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:45:00.232 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5729
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:45:07.300 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:50:00.068 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 7529
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:50:07.158 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ ```

============ Mark until here for C&P =============

iob diag has finished.
)

viele Grüße
Markus

[markus-now]

Hallo,
keiner eine Idee.
Bin mal von RaspberryMatic auf PIVCCU aber das brach auch kein Erfolg.

Grüße
Markus

[DJMarc75]

@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

keiner eine Idee

Wie soll man denn diesen Kauderwelsch vernünftig lesen ?

Texte kommen hier in Codetags rein siehe:

https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge

[markus-now]

@djmarc75 Super vielen lieben Dank für den Hinweis.

[DJMarc75]

@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:

vielen lieben Dank für den Hinweis

Dann setz das Ganze bitte nochmals hier in Codetags ein
Dann bekommst Du sicher schneller Hilfe

[ticaki]

@markus-now

iobroker status 
//nicht Status

[markus-now]

@djmarc75 Hallo DJMarc75 hier in Codetags

Auch von mir ein Hallo in die Runde,
ich habe ein änliches problem, es wird alles synchronisiert bis auf die Objekt-Namen. Ich habe schon mehrere Neuinstallationen von ioBroker, CCU, hm-rpc, hm-rega.

Das Problem tauchte aber erst nach einem Backup auf ein neu installiertes 64Bit System und das iobroker Backup war von dem 32Bit System.

Bekomme immer diese Fehlermeldung.

Kann mir bitte jemand weiter helfen, ich habe keine Idee mehr?

ioBroker:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1800 MHz
Modell: Cortex-A72
RAM: 7.6 GB
System-Betriebszeit: 00:04:18
Node.js: v18.17.0
time: 1690967161861
Adapter-Anzahl: 485
NPM: 9.6.7
Datenträgergröße: 1833.6 GB
Freier Festplattenspeicher: 1827.3 GB
Betriebszeit: 00:03:15

iob diag

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 17:35:31 up  1:14,  3 users,  load average: 0.54, 0.72, 0.64
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.0'C
volt=0.9060V

*** Time and Time Zones ***
               Local time: Wed 2023-08-02 17:35:31 CEST
           Universal time: Wed 2023-08-02 15:35:31 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
iobroker
/home/iobroker
iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.5G        4.3G         35M        968M        5.1G
Swap:            99M          0B         99M
Total:          7.9G        2.5G        4.4G

         7811 M total memory
         2522 M used memory
         2759 M active memory
          507 M inactive memory
         4320 M free memory
           97 M buffer memory
          871 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      1.8T  6.3G  1.8T   1% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     782M   20K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Aug  2 16:20:58 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Wed Aug  2 16:21:02 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Aug  2 16:21:02 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Wed Aug  2 16:21:08 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
766M    /var/
392M    /var/lib
208M    /var/lib/influxdb/engine
208M    /var/lib/influxdb
199M    /var/lib/influxdb/engine/data/2d0dd83dd19d7bdf/autogen

Archived and active journals take up 96.0M in the file system.

/opt/iobroker/backups:
128M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
546M    /opt/iobroker/iobroker-data/
360M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/backup-objects
88M     /opt/iobroker/iobroker-data/files/echarts.admin
57M     /opt/iobroker/iobroker-data/files/echarts

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
32M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.0
/usr/bin/node           v18.17.0
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.0-deb-1nodesource1
  Candidate: 18.17.0-deb-1nodesource1
  Version table:
 *** 18.17.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.6.1
javascript:     7.0.3

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBrokerMaster                           -  enabled, port: 8081, bind: 172.36.0.10, run as: admin
+ system.adapter.alarm.0                  : alarm                 : ioBrokerMaster                           -  enabled
  system.adapter.alias-manager.0          : alias-manager         : ioBrokerMaster                           - disabled
+ system.adapter.backitup.0               : backitup              : ioBrokerMaster                           -  enabled
+ system.adapter.backitup.1               : backitup              : iob-slave1-Nowak-Automatisierung         -  enabled
  system.adapter.bshb.0                   : bshb                  : ioBrokerMaster                           - disabled
  system.adapter.device-reminder.0        : device-reminder       : ioBrokerMaster                           - disabled
  system.adapter.devices.0                : devices               : ioBrokerMaster                           - disabled
+ system.adapter.discovery.0              : discovery             : ioBrokerMaster                           -  enabled
+ system.adapter.doorbird.0               : doorbird              : ioBrokerMaster                           -  enabled
  system.adapter.dwd.0                    : dwd                   : ioBrokerMaster                           -  enabled
+ system.adapter.echarts.0                : echarts               : ioBrokerMaster                           -  enabled
  system.adapter.feiertage.0              : feiertage             : ioBrokerMaster                           -  enabled
  system.adapter.geofency.0               : geofency              : ioBrokerMaster                           - disabled, port: 7999, bind: 0.0.0.0
+ system.adapter.growatt.0                : growatt               : ioBrokerMaster                           -  enabled
+ system.adapter.harmony.0                : harmony               : ioBrokerMaster                           -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : ioBrokerMaster                           - disabled
+ system.adapter.hm-rega.0                : hm-rega               : ioBrokerMaster                           -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : ioBrokerMaster                           -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : ioBrokerMaster                           -  enabled, port: 0
+ system.adapter.hue.0                    : hue                   : ioBrokerMaster                           -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : ioBrokerMaster                           - disabled
+ system.adapter.influxdb.0               : influxdb              : ioBrokerMaster                           -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : ioBrokerMaster                           -  enabled
+ system.adapter.iot.0                    : iot                   : ioBrokerMaster                           -  enabled
+ system.adapter.jarvis.0                 : jarvis                : ioBrokerMaster                           -  enabled
+ system.adapter.javascript.0             : javascript            : ioBrokerMaster                           -  enabled
+ system.adapter.linkeddevices.0          : linkeddevices         : ioBrokerMaster                           -  enabled
  system.adapter.luftdaten.0              : luftdaten             : ioBrokerMaster                           -  enabled
  system.adapter.netatmo.0                : netatmo               : ioBrokerMaster                           - disabled
+ system.adapter.nina.0                   : nina                  : ioBrokerMaster                           -  enabled
  system.adapter.odl.0                    : odl                   : ioBrokerMaster                           -  enabled
  system.adapter.owfs.0                   : owfs                  : ioBrokerMaster                           - disabled, port: 4304
+ system.adapter.pollenflug.0             : pollenflug            : ioBrokerMaster                           -  enabled
  system.adapter.pvforecast.0             : pvforecast            : ioBrokerMaster                           - disabled
+ system.adapter.rpi2.0                   : rpi2                  : ioBrokerMaster                           -  enabled
+ system.adapter.rpi2.1                   : rpi2                  : iob-slave1-Nowak-Automatisierung         -  enabled
  system.adapter.sayit.0                  : sayit                 : ioBrokerMaster                           - disabled
+ system.adapter.scenes.0                 : scenes                : ioBrokerMaster                           -  enabled
+ system.adapter.shuttercontrol.0         : shuttercontrol        : ioBrokerMaster                           -  enabled
+ system.adapter.smartmeter.0             : smartmeter            : iob-slave1-Nowak-Automatisierung         -  enabled
+ system.adapter.sonos.0                  : sonos                 : ioBrokerMaster                           -  enabled
+ system.adapter.sony-bravia.0            : sony-bravia           : ioBrokerMaster                           -  enabled
+ system.adapter.sprinklecontrol.0        : sprinklecontrol       : ioBrokerMaster                           -  enabled
+ system.adapter.statistics.0             : statistics            : ioBrokerMaster                           -  enabled
  system.adapter.synology.0               : synology              : ioBrokerMaster                           - disabled, port: 5000
+ system.adapter.tankerkoenig.0           : tankerkoenig          : ioBrokerMaster                           -  enabled
+ system.adapter.telegram.0               : telegram              : ioBrokerMaster                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : ioBrokerMaster                           -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.tr-064.0                 : tr-064                : ioBrokerMaster                           - disabled
+ system.adapter.unifi.0                  : unifi                 : ioBrokerMaster                           -  enabled
+ system.adapter.web.0                    : web                   : ioBrokerMaster                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : ioBrokerMaster                           -  enabled
  system.adapter.yr.0                     : yr                    : ioBrokerMaster                           -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBrokerMaster                           -  enabled, port: 8081, bind: 172.36.0.10, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : ioBrokerMaster                           -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : ioBrokerMaster                           -  enabled, port: 0
+ system.adapter.hue.0                    : hue                   : ioBrokerMaster                           -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : ioBrokerMaster                           -  enabled, port: 8086
+ system.adapter.telegram.0               : telegram              : ioBrokerMaster                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : ioBrokerMaster                           -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : ioBrokerMaster                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.6.1
Adapter    "alarm"        : 3.3.12   , installed 3.3.12
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bshb"         : 0.2.4    , installed 0.2.4
Adapter    "device-reminder": 1.2.9  , installed 1.2.9
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "doorbird"     : 1.0.5    , installed 1.0.5
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "geofency"     : 1.2.4    , installed 1.2.4
Adapter    "growatt"      : 3.0.2    , installed 3.0.2
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "heatingcontrol": 2.10.6  , installed 2.10.6
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.18  , installed 1.15.18
Adapter    "hue"          : 3.9.3    , installed 3.9.3
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "iot"          : 1.14.5   , installed 1.14.5
Adapter    "jarvis"       : 3.1.2    , installed 3.1.2
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "linkeddevices": 1.5.5    , installed 1.5.5
Adapter    "luftdaten"    : 3.0.0    , installed 3.0.0
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "odl"          : 2.0.5    , installed 2.0.5
Adapter    "owfs"         : 0.7.0    , installed 0.7.0
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "pvforecast"   : 2.7.1    , installed 2.7.1
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shuttercontrol": 1.5.0   , installed 1.5.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sonos"        : 2.3.1    , installed 2.3.1
Adapter    "sony-bravia"  : 1.0.9    , installed 1.0.9
Adapter    "sprinklecontrol": 0.2.13 , installed 0.2.13
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "unifi"        : 0.6.6    , installed 0.6.6
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "yahka"        : 0.17.0   , installed 0.17.0
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        21538
States:         18501

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://security.debian.org/debian-security bullseye-security InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:6 https://repos.influxdata.com/debian bullseye InRelease
Reading package lists...
Pending Updates: 1

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 172.36.0.10:8081        0.0.0.0:*               LISTEN      1000       17099      1873/io.admin.0
tcp        0      0 172.36.0.10:8100        0.0.0.0:*               LISTEN      1000       19677      2222/io.doorbird.0
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          15410      553/cupsd
tcp        0      0 127.0.0.1:33633         0.0.0.0:*               LISTEN      1000       22964      2974/io.yahka.0
tcp        0      0 172.36.0.10:9000        0.0.0.0:*               LISTEN      1000       18846      680/iobroker.js-con
tcp        0      0 172.36.0.10:9001        0.0.0.0:*               LISTEN      1000       18725      680/iobroker.js-con
tcp        0      0 0.0.0.0:42001           0.0.0.0:*               LISTEN      1000       18222      2149/io.hm-rpc.1
tcp        0      0 0.0.0.0:42010           0.0.0.0:*               LISTEN      1000       19586      2133/io.hm-rpc.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11878      585/sshd: /usr/sbin
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1000       20703      2409/io.jarvis.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        13075      462/influxd
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       22845      2967/io.web.0
tcp6       0      0 :::3500                 :::*                    LISTEN      1000       19181      2072/io.sonos.0
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          15409      553/cupsd
tcp6       0      0 :::61991                :::*                    LISTEN      1000       20583      2355/io.harmony.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          11880      585/sshd: /usr/sbin
tcp6       0      0 :::41159                :::*                    LISTEN      1000       20441      2974/io.yahka.0
udp        0      0 0.0.0.0:43281           0.0.0.0:*                           108        2032       403/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          11930      475/dhcpcd
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1000       20584      2355/io.harmony.0
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          14949      609/cups-browsed
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        2030       403/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          12024      475/dhcpcd
udp6       0      0 :::58029                :::*                                108        2033       403/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        2031       403/avahi-daemon: r

*** Log File - Last 25 Lines ***

"000A9D89B93E49:1":{"Name":"Buero_Wandthermostat%3A1","Interface":"HmIP-RF"},
"000A9D89B93E49:2":{"Name":"Buero_Wandthermostat%3A2","Interface":"HmIP-RF"},
"000A9D89B93E49:3":{"Name":"Buero_Wandthermostat%3A3","Interface":"HmIP-RF"},
"000A9D89B93E49:4":{"Name":"Buero_Wandthermostat%3A4","Interface":"HmIP-RF"},
"000A9D89B93E49:5":{"Name":"Buero_Wandthermostat%3A5","Interface":"HmIP-RF"},
"000A9D89B93E49:6":{"Name":"Buero_Wandthermostat%3A6","Interface":"HmIP-RF"},
"000A9D89B93E49:7":{"Name":"Buero_Wandthermostat%3A7","Interface":"HmIP-RF"},
"OEQ1019551":{"Name":"Carport_Bewegungsmelder","Interface":"BidCos-RF"},
"OEQ1019551:0":{"Name":"Carport_Bewegungsmelder%3A0","Interface":"BidCos-RF"},
"OEQ1019551:1":{"Name":"10_Carport_Bewegungsmelder_Einfahrt%3A1","Interface":"BidCos-RF"},
"OEQ1019551:2":{"Name":"10_Carport_Bewegungsmelder_Hof%3A2","Interface":"BidCos-RF"},
"OEQ1019551:3":{"Name":"10_Carport_frei%3A3","Interface":"BidCos-RF"},
"OEQ2264080":{"Name":"Carport_Licht_SD","Interface":"BidCos-RF"},
"OEQ2264080:0":{"Name":"Carport_Licht_SD%3A0","Interface":"BidCos-RF"},
"OEQ2264080:1":{"Name":"20_Carport_Beleuchtung%3A1","Interface":"BidCos-RF"},
"OEQ2264080:2":{"Name":"20_Carport_SD%3A2","Interface":"BidCos-RF"}
2023-08-02 17:25:00.335  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 8749
2023-08-02 17:25:07.379  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 17:30:00.313  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 10675
2023-08-02 17:30:04.363  - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 started with pid 10690
2023-08-02 17:30:09.045  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-02 17:30:15.019  - warn: luftdaten.0 (10690) State "luftdaten.0.38240.timestamp" has no existing object, this might lead to an error in future versions
2023-08-02 17:30:15.654  - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR)
2023-08-02 17:35:00.359  - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 11975
2023-08-02 17:35:07.726  - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)


============ Mark until here for C&P =============

iob diag has finished.


Press any key for a summary


Copy text starting here:

======================= SUMMARY =======================
                     v.2023-04-16


Operatingsystem:        Debian GNU/Linux 11 (bullseye)
Kernel:                 6.1.21-v8+
Installation:           Native
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               true
Boot Target:            graphical.target

Pending OS-Updates:     1
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.17.0
                        /usr/bin/node           v18.17.0
                        /usr/bin/npm            9.6.7
                        /usr/bin/npx            9.6.7

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.5G        4.3G         35M        972M        5.1G
Swap:            99M          0B         99M
Total:          7.9G        2.5G        4.4G

Active iob-Instances:   37
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   6.6.1

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : ioBrokerMaster                           -  enabled, port: 8081, bind: 172.36.0.10, run as: admin
+ system.adapter.web.0                    : web                   : ioBrokerMaster                           -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                21538
States:                 18502

Size of iob-Database:

32M     /opt/iobroker/iobroker-data/objects.jsonl
20M     /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

Grüße
Markus