Wechselnde USB-Stick mounts nach Neustart

MP_Trixi

Hallo,

ich habe iobroker auf einem Raspi laufen. Daran hängen zwei USB Sticks (einer von Selve zur Steuerung der Jalousie und ein Sonoff Zigbee Controller). Mein Problem: nach einem Neustart tauschen die beiden meist den Mount (ich hoffe ich drücke das richtig aus ;) ). Also der der vorher USB0 war wird zu USB1 und vice versa. Damit läuft der Zigbee Adapter nicht mehr, bis es dort dann umgestellt wird. Gibt es eine Möglichkeit, sicherzustellen, dass der Mount immer gleich ist?

pi@smarthome:/media $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0403:6015 Future Technology Devices International, Ltd Bridge(I2C/SPI/UART/FIFO)
Bus 001 Device 003: ID 10c4:ea60 Silicon Labs CP210x UART Bridge
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Hier noch ein iob diag falls hilfreich:
======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 08:41:44 up  5:49,  2 users,  load average: 0.36, 0.62, 0.69
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.0'C
volt=0.9160V

*** Time and Time Zones ***
               Local time: Fri 2023-06-30 08:41:44 CEST
           Universal time: Fri 2023-06-30 06:41:44 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        2.6G        350M        0.0K        852M        1.3G
Swap:            99M          0B         99M
Total:          3.9G        2.6G        450M

         3794 M total memory
         2591 M used memory
          241 M active memory
         3056 M inactive memory
          350 M free memory
           87 M buffer memory
          765 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       28G   12G   15G  45% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  840K  759M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   31M  222M  13% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Jun 30 02:51:52 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:62:A2:E5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=cf73e54d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Jun 30 02:51:53 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Fri Jun 30 02:51:53 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Fri Jun 30 02:51:54 2023] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Fri Jun 30 02:51:54 2023] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[Fri Jun 30 02:51:54 2023] EXT4-fs (mmcblk0p2): recovery complete
[Fri Jun 30 02:51:54 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Fri Jun 30 02:51:54 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Jun 30 02:51:55 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
4.0G    /var/
3.2G    /var/log
2.8G    /var/log/journal/6c5b87a59f584c03b6491451f2e5b6da
2.8G    /var/log/journal
480M    /var/lib

Archived and active journals take up 2.7G in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
3.7G    /opt/iobroker/iobroker-data/
3.0G    /opt/iobroker/iobroker-data/history
455M    /opt/iobroker/iobroker-data/files
95M     /opt/iobroker/iobroker-data/backup-objects
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png

The five largest files in iobroker-data are:
112M    /opt/iobroker/iobroker-data/states.jsonl
35M     /opt/iobroker/iobroker-data/objects.jsonl
33M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.4f0a34b4.js.map
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
8.2M    /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.4f0a34b4.js

*** NodeJS-Installation ***

/usr/bin/nodejs         v16.19.0
/usr/bin/node           v16.19.0
/usr/bin/npm            8.19.3
/usr/bin/npx            8.19.3


nodejs:
  Installed: 16.19.0-deb-1nodesource1
  Candidate: 16.19.0-deb-1nodesource1
  Version table:
 *** 16.19.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : smarthome                                -  enabled
+ system.adapter.backitup.0               : backitup              : smarthome                                -  enabled
+ system.adapter.bmw.0                    : bmw                   : smarthome                                -  enabled
  system.adapter.devices.0                : devices               : smarthome                                -  enabled
  system.adapter.discovery.0              : discovery             : smarthome                                - disabled
+ system.adapter.energiefluss.0           : energiefluss          : smarthome                                -  enabled
  system.adapter.feiertage.0              : feiertage             : smarthome                                -  enabled
  system.adapter.habpanel.0               : habpanel              : smarthome                                - disabled
+ system.adapter.harmony.0                : harmony               : smarthome                                -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : smarthome                                - disabled
+ system.adapter.history.0                : history               : smarthome                                -  enabled
  system.adapter.homeconnect.0            : homeconnect           : smarthome                                - disabled
+ system.adapter.hue-extended.0           : hue-extended          : smarthome                                -  enabled
  system.adapter.ical.0                   : ical                  : smarthome                                -  enabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: smarthome                                - disabled
  system.adapter.icons-icons8.0           : icons-icons8          : smarthome                                -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : smarthome                                - disabled
  system.adapter.icons-material-svg.0     : icons-material-svg    : smarthome                                -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : smarthome                                - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: smarthome                                -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : smarthome                                - disabled
+ system.adapter.influxdb.0               : influxdb              : smarthome                                -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : smarthome                                -  enabled
  system.adapter.javascript.1             : javascript            : smarthome                                - disabled
+ system.adapter.logparser.0              : logparser             : smarthome                                -  enabled
+ system.adapter.meross.0                 : meross                : smarthome                                -  enabled
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : smarthome                                -  enabled, port: 54321
+ system.adapter.modbus.0                 : modbus                : smarthome                                -  enabled
+ system.adapter.myenergi.0               : myenergi              : smarthome                                -  enabled
+ system.adapter.net-tools.0              : net-tools             : smarthome                                -  enabled
  system.adapter.openweathermap.0         : openweathermap        : smarthome                                -  enabled
  system.adapter.powerfox2.0              : powerfox2             : smarthome                                -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : smarthome                                -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : smarthome                                -  enabled
  system.adapter.schoolfree.0             : schoolfree            : smarthome                                -  enabled
+ system.adapter.selverf.0                : selverf               : smarthome                                -  enabled
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : smarthome                                -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : smarthome                                -  enabled
+ system.adapter.synology.0               : synology              : smarthome                                -  enabled, port: 5501
+ system.adapter.telegram.0               : telegram              : smarthome                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.trashschedule.0          : trashschedule         : smarthome                                -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : smarthome                                -  enabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : smarthome                                -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : smarthome                                -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : smarthome                                -  enabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : smarthome                                - disabled
  system.adapter.vis-map.0                : vis-map               : smarthome                                -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : smarthome                                -  enabled
  system.adapter.vis-material-webfont.0   : vis-material-webfont  : smarthome                                -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : smarthome                                -  enabled
  system.adapter.vis-metro.0              : vis-metro             : smarthome                                -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : smarthome                                -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : smarthome                                -  enabled
  system.adapter.vis-weather.0            : vis-weather           : smarthome                                -  enabled
  system.adapter.vis.0                    : vis                   : smarthome                                -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : smarthome                                -  enabled
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : smarthome                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : smarthome                                -  enabled
+ system.adapter.zigbee.0                 : zigbee                : smarthome                                -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.influxdb.0               : influxdb              : smarthome                                -  enabled, port: 8086
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : smarthome                                -  enabled, port: 54321
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : smarthome                                -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.synology.0               : synology              : smarthome                                -  enabled, port: 5501
+ system.adapter.telegram.0               : telegram              : smarthome                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : smarthome                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthome                                -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Cannot download repository hash file from "http://download.iobroker.net/sources-dist-hash.json": timeout of 10000ms exceeded
Cannot download repository file from "http://download.iobroker.net/sources-dist.json": timeout of 10000ms exceeded
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bmw"          : 2.5.7    , installed 2.5.7
Adapter    "devices"      : 1.1.5    , installed 1.1.1  [Updatable]
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "habpanel"     : 0.5.0    , installed 0.5.0
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "heatingcontrol": 2.10.6  , installed 2.10.6
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "homeconnect"  : 1.1.1    , installed 1.1.1
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.3   , installed 1.13.2 [Updatable]
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "logparser"    : 2.2.0    , installed 2.2.0
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "mihome-vacuum": 3.11.0   , installed 3.8.8  [Updatable]
Adapter    "modbus"       : 5.0.11   , installed 5.0.5  [Updatable]
Adapter    "myenergi"     : 0.0.3    , installed 0.0.3
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "openweathermap": 0.3.9   , installed 0.3.9
Adapter    "powerfox2"    : 0.0.12   , installed 0.0.12
Adapter    "pvforecast"   : 2.7.1    , installed 2.7.1
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "schoolfree"   : 1.1.1    , installed 1.1.1
Adapter    "selverf"      : 0.6.2    , installed 0.6.2
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "telegram"     : 1.15.6   , installed 1.15.6
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.94.0   , installed 0.94.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-map"      : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "vw-connect"   : 0.0.67   , installed 0.0.56 [Updatable]
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "yahka"        : 0.17.0   , installed 0.17.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        22908
States:         20087

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:6 https://repos.influxdata.com/debian stable InRelease
Hit:7 https://apt.grafana.com stable InRelease
Reading package lists...
Pending Updates: 61

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        13924      681/influxd
tcp        0      0 0.0.0.0:40361           0.0.0.0:*               LISTEN      1001       17887      1594/io.yahka.0
tcp        0      0 127.0.0.1:42017         0.0.0.0:*               LISTEN      1001       218091     1594/io.yahka.0
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       14413      787/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       14420      787/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11148      564/sshd: /usr/sbin
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       19256      1815/io.ws.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        12066      681/influxd
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       17857      1500/io.simple-api.
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       14551      924/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       17793      1458/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          11150      564/sshd: /usr/sbin
tcp6       0      0 :::3000                 :::*                    LISTEN      109        14388      677/grafana-server
tcp6       0      0 :::61991                :::*                    LISTEN      1001       18969      1630/io.harmony.0
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       18970      1630/io.harmony.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        11936      445/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       16814      1136/io.shelly.0
udp        0      0 0.0.0.0:59165           0.0.0.0:*                           108        11938      445/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13791      676/dhcpcd
udp        0      0 0.0.0.0:53421           0.0.0.0:*                           1001       177938     18176/io.mihome-vac
udp6       0      0 :::5353                 :::*                                108        11937      445/avahi-daemon: r
udp6       0      0 :::48520                :::*                                108        11939      445/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-06-30 08:40:48.905  - info: synology.0 (1259) Connecting to Synology 192.168.1.12:5501
2023-06-30 08:41:00.060  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 33003
2023-06-30 08:41:03.315  - info: powerfox2.0 (33003) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v16.19.0, js-controller: 4.0.24
2023-06-30 08:41:05.502  - info: powerfox2.0 (33003) Terminated (NO_ERROR): Without reason
2023-06-30 08:41:06.050  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)
2023-06-30 08:41:23.017  - info: synology.0 (1259) Connecting to Synology 192.168.1.12:5501
2023-06-30 08:41:34.904  - info: meross.0 (1055) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available
2023-06-30 08:41:34.905  - warn: meross.0 (1055) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined
2023-06-30 08:41:44.121  - info: meross.0 (1055) Can not get Data for Device 2111307303215436102648e1e97ec6df: Error: Device has no data connection available
2023-06-30 08:41:44.121  - warn: meross.0 (1055) Can not get Data for Device 2111307303215436102648e1e97ec6df: undefined
2023-06-30 08:41:57.130  - info: synology.0 (1259) Connecting to Synology 192.168.1.12:5501
2023-06-30 08:42:00.069  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 33295
2023-06-30 08:42:03.093  - info: powerfox2.0 (33295) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v16.19.0, js-controller: 4.0.24
2023-06-30 08:42:06.566  - info: powerfox2.0 (33295) Terminated (NO_ERROR): Without reason
2023-06-30 08:42:07.109  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)
2023-06-30 08:42:31.177  - info: synology.0 (1259) Connecting to Synology 192.168.1.12:5501
2023-06-30 08:42:41.048  - info: meross.0 (1055) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available
2023-06-30 08:42:41.049  - warn: meross.0 (1055) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined
2023-06-30 08:42:50.296  - info: meross.0 (1055) Can not get Data for Device 2111307303215436102648e1e97ec6df: Error: Device has no data connection available
2023-06-30 08:42:50.297  - warn: meross.0 (1055) Can not get Data for Device 2111307303215436102648e1e97ec6df: undefined
2023-06-30 08:43:00.076  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 33489
2023-06-30 08:43:04.481  - info: powerfox2.0 (33489) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v16.19.0, js-controller: 4.0.24
2023-06-30 08:43:05.066  - info: synology.0 (1259) Connecting to Synology 192.168.1.12:5501
2023-06-30 08:43:07.405  - info: powerfox2.0 (33489) Terminated (NO_ERROR): Without reason
2023-06-30 08:43:07.939  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)

============ Mark until here for C&P =============

Thomas Braun

@mp_trixi

Deswegen nutzt man auch die device links aus /dev/serial/by-id und nicht die 'zufällig' vergebenen in /dev/tty*

Thomas Braun

@mp_trixi
Und halt dein System auf Stand. Sowohl iobroker wie auch Betriebssystem.

MP_Trixi

@thomas-braun
Hi - danke für die schnelle Antwort. Die nutze ich wie? Im Zigbee Adapter habe ich ja nur ein Dropdown-Feld, wo ich den Stick auswählen kann.

MP_Trixi

@thomas-braun
was müsste ich in welcher Reihenfolge updaten? Gibt es dazu eine Anleitung? Bin Linux DAU

Thomas Braun

@mp_trixi

Konsole auf, mit

ls -la /dev/serial/by-id

nachgeschaut, Pfad zusammenbauen.
Schaut dann halt ungefähr so aus:

/dev/serial/by-id/usb-Silicon_Labs[usw...]-port0

Das dann unter COM-Anschlussname eintragen und du hast Ruhe.
(Passende Version von udev vorausgesetzt). Siehe hier:
https://forum.iobroker.net/topic/65017/zigbee-conbee2-funktioniert-nach-update-nicht-mehr-udev?_=1688109107218

Thomas Braun

@mp_trixi sagte in Wechselnde USB-Stick mounts nach Neustart:

was müsste ich in welcher Reihenfolge updaten? Gibt es dazu eine Anleitung?

'Von unten nach oben'.
Zuerst Betriebssystem, dann die nächsten Ebenen.

sudo apt update
iob stop
sudo apt full-upgrade
sudo reboot

Noch nie gemacht, fürchte ich. In deinem Fall vorher 'udev' auf hold setzen. Siehe Link im vorherigen Beitrag.

iobroker dann wie üblich aktuell halten.

MP_Trixi

@thomas-braun
nochmals zwischendurch Danke für Deine schnelle Hilfe. Hier mein Ergebnis:

pi@smarthome:~ $ ls -l /dev/serial/by-id/
total 0
lrwxrwxrwx 1 root root 13 Jun 30 02:17 usb-FTDI_FT230X_Basic_UART_DM01F5RM-if00-port0 -> ../../ttyUSB1
lrwxrwxrwx 1 root root 13 Jun 30 08:58 usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0 -> ../../ttyUSB0
pi@smarthome:~ $ apt policy udev
udev:
  Installed: 247.3-7+deb11u1
  Candidate: 247.3-7+deb11u2
  Version table:
     247.3-7+deb11u2 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
 *** 247.3-7+deb11u1 100
        100 /var/lib/dpkg/status
pi@smarthome:~ $

damit gehe ich davon aus, dass ich den Bug noch nicht habe und udev erst noch auf hold setzen muss, richtig?

Thomas Braun

@mp_trixi sagte in Wechselnde USB-Stick mounts nach Neustart:

247.3-7+deb11u2

ist die Version mit dem Fehler, also deine 247.3-7+deb11u1 auf hold setzen oder die 247.3-7+deb11u4 aus den proposed-updates holen. Kannste machen wie du willst.

MP_Trixi

@thomas-braun
so, hat ein bisschen gedauert (habe noch ein Image der SD gezogen).
Hab mir den String zusammengebastelt und im Zigbee Adapter hinterlegt - funzt - wieder was gelernt. Danke schön :+1:

Zum Update: Noch nie gemacht würd ich nicht sagen. Aber schon länger nicht mehr. War diesbezüglich übereifrig und hatte dann mal eine zu neue NodeJS Version drauf und prompt dafür einen Rüffel bekommen :)
udev ist nun auf 247.3-7+deb11u4. Upgrade ist gelaufen (soweit ok oder muss ich da noch was machen?).

nochmals der aktuelle Auszug:

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 11:50:12 up 17 min,  2 users,  load average: 1.66, 1.54, 1.24
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=57.9'C
volt=0.9160V

*** Time and Time Zones ***
               Local time: Fri 2023-06-30 11:50:12 CEST
           Universal time: Fri 2023-06-30 09:50:12 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        2.6G        253M        0.0K        987M        1.3G
Swap:            99M          0B         99M
Total:          3.9G        2.6G        353M

         3794 M total memory
         2553 M used memory
         2606 M active memory
          719 M inactive memory
          253 M free memory
           93 M buffer memory
          893 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       28G   12G   15G  45% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  844K  759M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   31M  222M  13% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Jun 30 11:32:49 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:62:A2:E5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=cf73e54d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Jun 30 11:32:50 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Fri Jun 30 11:32:50 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Jun 30 11:32:52 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
4.0G    /var/
3.2G    /var/log
2.8G    /var/log/journal/6c5b87a59f584c03b6491451f2e5b6da
2.8G    /var/log/journal
463M    /var/lib

Archived and active journals take up 2.7G in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
3.6G    /opt/iobroker/iobroker-data/
3.0G    /opt/iobroker/iobroker-data/history
458M    /opt/iobroker/iobroker-data/files
95M     /opt/iobroker/iobroker-data/backup-objects
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png

The five largest files in iobroker-data are:
63M     /opt/iobroker/iobroker-data/states.jsonl
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M     /opt/iobroker/iobroker-data/objects.jsonl
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
8.6M    /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js

*** NodeJS-Installation ***

/usr/bin/nodejs         v16.20.1
/usr/bin/node           v16.20.1
/usr/bin/npm            8.19.4
/usr/bin/npx            8.19.4


nodejs:
  Installed: 16.20.1-deb-1nodesource1
  Candidate: 16.20.1-deb-1nodesource1
  Version table:
 *** 16.20.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
        500 http://deb.debian.org/debian bullseye-proposed-updates/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : smarthome                                -  enabled
+ system.adapter.backitup.0               : backitup              : smarthome                                -  enabled
+ system.adapter.bmw.0                    : bmw                   : smarthome                                -  enabled
  system.adapter.devices.0                : devices               : smarthome                                -  enabled
  system.adapter.discovery.0              : discovery             : smarthome                                - disabled
+ system.adapter.energiefluss.0           : energiefluss          : smarthome                                -  enabled
  system.adapter.feiertage.0              : feiertage             : smarthome                                -  enabled
  system.adapter.habpanel.0               : habpanel              : smarthome                                - disabled
+ system.adapter.harmony.0                : harmony               : smarthome                                -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : smarthome                                - disabled
+ system.adapter.history.0                : history               : smarthome                                -  enabled
  system.adapter.homeconnect.0            : homeconnect           : smarthome                                - disabled
+ system.adapter.hue-extended.0           : hue-extended          : smarthome                                -  enabled
  system.adapter.ical.0                   : ical                  : smarthome                                -  enabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: smarthome                                - disabled
  system.adapter.icons-icons8.0           : icons-icons8          : smarthome                                -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : smarthome                                - disabled
  system.adapter.icons-material-svg.0     : icons-material-svg    : smarthome                                -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : smarthome                                - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: smarthome                                -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : smarthome                                - disabled
+ system.adapter.influxdb.0               : influxdb              : smarthome                                -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : smarthome                                -  enabled
  system.adapter.javascript.1             : javascript            : smarthome                                - disabled
+ system.adapter.logparser.0              : logparser             : smarthome                                -  enabled
+ system.adapter.meross.0                 : meross                : smarthome                                -  enabled
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : smarthome                                -  enabled, port: 54321
+ system.adapter.modbus.0                 : modbus                : smarthome                                -  enabled
+ system.adapter.myenergi.0               : myenergi              : smarthome                                -  enabled
+ system.adapter.net-tools.0              : net-tools             : smarthome                                -  enabled
  system.adapter.openweathermap.0         : openweathermap        : smarthome                                -  enabled
  system.adapter.powerfox2.0              : powerfox2             : smarthome                                -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : smarthome                                -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : smarthome                                -  enabled
  system.adapter.schoolfree.0             : schoolfree            : smarthome                                -  enabled
+ system.adapter.selverf.0                : selverf               : smarthome                                -  enabled
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : smarthome                                -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : smarthome                                -  enabled
+ system.adapter.synology.0               : synology              : smarthome                                -  enabled, port: 5501
+ system.adapter.telegram.0               : telegram              : smarthome                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.trashschedule.0          : trashschedule         : smarthome                                -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : smarthome                                -  enabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : smarthome                                -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : smarthome                                -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : smarthome                                -  enabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : smarthome                                - disabled
  system.adapter.vis-map.0                : vis-map               : smarthome                                -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : smarthome                                -  enabled
  system.adapter.vis-material-webfont.0   : vis-material-webfont  : smarthome                                -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : smarthome                                -  enabled
  system.adapter.vis-metro.0              : vis-metro             : smarthome                                -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : smarthome                                -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : smarthome                                -  enabled
  system.adapter.vis-weather.0            : vis-weather           : smarthome                                -  enabled
  system.adapter.vis.0                    : vis                   : smarthome                                -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : smarthome                                -  enabled
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : smarthome                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : smarthome                                -  enabled
+ system.adapter.zigbee.0                 : zigbee                : smarthome                                -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.influxdb.0               : influxdb              : smarthome                                -  enabled, port: 8086
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : smarthome                                -  enabled, port: 54321
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : smarthome                                -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.synology.0               : synology              : smarthome                                -  enabled, port: 5501
+ system.adapter.telegram.0               : telegram              : smarthome                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : smarthome                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthome                                -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Cannot download repository hash file from "http://download.iobroker.net/sources-dist-hash.json": timeout of 10000ms exceeded
Cannot download repository file from "http://download.iobroker.net/sources-dist.json": timeout of 10000ms exceeded
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bmw"          : 2.5.7    , installed 2.5.7
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "habpanel"     : 0.5.0    , installed 0.5.0
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "heatingcontrol": 2.10.6  , installed 2.10.6
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "homeconnect"  : 1.1.1    , installed 1.1.1
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "logparser"    : 2.2.0    , installed 2.2.0
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "mihome-vacuum": 3.11.0   , installed 3.8.8  [Updatable]
Adapter    "modbus"       : 5.0.11   , installed 5.0.5  [Updatable]
Adapter    "myenergi"     : 0.0.3    , installed 0.0.3
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "openweathermap": 0.3.9   , installed 0.3.9
Adapter    "powerfox2"    : 0.0.12   , installed 0.0.12
Adapter    "pvforecast"   : 2.7.1    , installed 2.7.1
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "schoolfree"   : 1.1.1    , installed 1.1.1
Adapter    "selverf"      : 0.6.2    , installed 0.6.2
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "telegram"     : 1.15.6   , installed 1.15.6
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.94.0   , installed 0.94.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-map"      : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "vw-connect"   : 0.0.67   , installed 0.0.67
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "yahka"        : 0.17.0   , installed 0.17.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        22935
States:         20147

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 http://deb.debian.org/debian bullseye-proposed-updates InRelease
Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:7 https://repos.influxdata.com/debian stable InRelease
Hit:8 https://apt.grafana.com stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1599       567/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       14776      782/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       1847       782/iobroker.js-con
tcp        0      0 0.0.0.0:37467           0.0.0.0:*               LISTEN      1001       16998      1262/io.yahka.0
tcp        0      0 127.0.0.1:34233         0.0.0.0:*               LISTEN      1001       26752      1262/io.yahka.0
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        13821      685/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          1601       567/sshd: /usr/sbin
tcp6       0      0 :::3000                 :::*                    LISTEN      109        14815      781/grafana
tcp6       0      0 :::61991                :::*                    LISTEN      1001       19305      1274/io.harmony.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       16909      1210/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15614      814/io.admin.0
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       16269      1225/io.simple-api.
tcp6       0      0 :::8086                 :::*                    LISTEN      999        15464      685/influxd
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       17265      1490/io.ws.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13668      450/avahi-daemon: r
udp        0      0 0.0.0.0:50618           0.0.0.0:*                           108        13670      450/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       15308      965/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13754      681/dhcpcd
udp        0      0 0.0.0.0:53421           0.0.0.0:*                           1001       14193      983/io.mihome-vacuu
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       19306      1274/io.harmony.0
udp6       0      0 :::5353                 :::*                                108        13669      450/avahi-daemon: r
udp6       0      0 :::52628                :::*                                108        13671      450/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-06-30 11:49:19.094  - info: host.smarthome iobroker upload [6] devices.admin /opt/iobroker/node_modules/iobroker.devices/admin/static/media/Windscreen.6058448bf63f72dd5036.svg static/media/Windscreen.6058448bf63f72dd5036.svg image/svg+xml
2023-06-30 11:49:19.116  - info: host.smarthome iobroker upload [5] devices.admin /opt/iobroker/node_modules/iobroker.devices/admin/static/media/Workshop.7856e59fe4f164c90609.svg static/media/Workshop.7856e59fe4f164c90609.svg image/svg+xml
2023-06-30 11:49:19.195  - info: host.smarthome iobroker upload [4] devices.admin /opt/iobroker/node_modules/iobroker.devices/admin/static/media/Workspace.97d73e419d966bfb6428.svg static/media/Workspace.97d73e419d966bfb6428.svg image/svg+xml
2023-06-30 11:49:19.204  - info: host.smarthome iobroker upload [3] devices.admin /opt/iobroker/node_modules/iobroker.devices/admin/static/media/names.3a7dae0bd6b8b03b280f.txt static/media/names.3a7dae0bd6b8b03b280f.txt text/plain
2023-06-30 11:49:19.214  - info: host.smarthome iobroker upload [2] devices.admin /opt/iobroker/node_modules/iobroker.devices/admin/static/media/names.e7efb5283d98000c74ac.txt static/media/names.e7efb5283d98000c74ac.txt text/plain
2023-06-30 11:49:19.233  - info: host.smarthome iobroker upload [1] devices.admin /opt/iobroker/node_modules/iobroker.devices/admin/tab.html tab.html text/html
2023-06-30 11:49:19.241  - info: host.smarthome iobroker upload [0] devices.admin /opt/iobroker/node_modules/iobroker.devices/admin/vendor/socket.io.js vendor/socket.io.js application/javascript
2023-06-30 11:49:20.284  - info: host.smarthome iobroker exit 0
2023-06-30 11:49:36.796  - info: admin.0 (814) ==> Connected system.user.admin from ::ffff:192.168.1.138
2023-06-30 11:49:44.097  - info: meross.0 (917) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available
2023-06-30 11:49:44.098  - warn: meross.0 (917) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined
2023-06-30 11:50:07.053  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 4608
2023-06-30 11:50:11.222  - info: powerfox2.0 (4608) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v16.20.1, js-controller: 4.0.24
2023-06-30 11:50:12.253  - info: powerfox2.0 (4608) Terminated (NO_ERROR): Without reason
2023-06-30 11:50:12.810  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)
2023-06-30 11:50:50.241  - info: meross.0 (917) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available
2023-06-30 11:50:50.242  - warn: meross.0 (917) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined
2023-06-30 11:51:00.066  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 4968
2023-06-30 11:51:02.498  - error: bmw.0 (1471) getvehicles v2 failed
2023-06-30 11:51:02.499  - error: bmw.0 (1471) AxiosError: Request failed with status code 404
2023-06-30 11:51:02.499  - error: bmw.0 (1471) {"statusCode":404,"message":"Resource not found"}
2023-06-30 11:51:03.344  - info: powerfox2.0 (4968) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v16.20.1, js-controller: 4.0.24
2023-06-30 11:51:07.626  - info: powerfox2.0 (4968) Terminated (NO_ERROR): Without reason
2023-06-30 11:51:08.195  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)
2023-06-30 11:51:21.772  - info: admin.0 (814) ==> Connected system.user.admin from ::ffff:192.168.1.138

Thomas Braun

@mp_trixi sagte in Wechselnde USB-Stick mounts nach Neustart:

War diesbezüglich übereifrig und hatte dann mal eine zu neue NodeJS Version drauf und prompt dafür einen Rüffel bekommen

Zu Recht wohl. Aber dafür gibt es bei nodesource/nodejs ja pro Versionszweig ein eigenes Repo. Da kann das eigentlich nicht versehentlich falsch laufen.
Könntest du im Übrigen auf nodejs@18 bringen, das ist zur Zeit die empfohlene Version.

Und die Quelle zu den bullseye-proposed-updates würde ich jetzt wieder auf Eis legen. Sonst ziehst du dir da u. U. noch anderes raus.

MP_Trixi

@thomas-braun sagte in Wechselnde USB-Stick mounts nach Neustart:

Zu Recht wohl

vermutlich. Irgendwie hab ich das hinbekommen. Führe nur aus und weiß nicht was ich tue - DAU halt. Nicht die besten Voraussetzungen, ich weiß. Deshalb bin ich auch dankbar, dass es Leute wie Dich gibt, die einem dann aus der Patsche helfen.

wie legt man die Quelle auf Eis? Die bullseye-proposed-updates.list wieder löschen?

Thomas Braun

@mp_trixi sagte in Wechselnde USB-Stick mounts nach Neustart:

Die bullseye-proposed-updates.list wieder löschen?

Ja, würde ich machen.
Oder die Zeile darin mit einem # auskommentieren.
Ich würde aber wohl die .list-Datei wieder löschen. Macht es bei upgrades auf 'Bookworm' leichter.

MP_Trixi

@thomas-braun

ok, habe das File wieder gelöscht:

pi@smarthome:/etc/apt/sources.list.d $ sudo rm bullseye-proposed-updates.list
pi@smarthome:/etc/apt/sources.list.d $ ls
grafana.list  influxdata.list  nodesource.list  raspi.list

NodeJS hab ich gemäß Anleitung auf Stand gebracht:

pi@smarthome:~ $ sudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null
pi@smarthome:~ $ type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx -v
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
/usr/bin/npx
v18.16.1
v18.16.1
9.5.1
9.5.1

dann iob fix und iob start

beim Start hatte ich dann aber einige Fehler im log, z.B.:

2023-06-30 12:28:13.976 - error: javascript.0 (11426) npm
2023-06-30 12:28:13.978 - error: javascript.0 (11426) WARN deprecated har-validator@5.1.5: this library is no longer supported
2023-06-30 12:28:14.471 - error: javascript.0 (11426) npm
2023-06-30 12:28:14.473 - error: javascript.0 (11426) WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained.
2023-06-30 12:28:14.825 - error: javascript.0 (11426) npm
2023-06-30 12:28:14.827 - error: javascript.0 (11426) WARN deprecated uuid@3.4.0: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details.
2023-06-30 12:28:15.223 - error: javascript.0 (11426) npm
2023-06-30 12:28:15.225 - error: javascript.0 (11426) WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
2023-06-30 12:29:01.635 - error: host.smarthome Caught by controller[0]: /opt/iobroker/node_modules/bindings/bindings.js:121
2023-06-30 12:29:01.637 - error: host.smarthome Caught by controller[0]: throw e;
2023-06-30 12:29:01.637 - error: host.smarthome Caught by controller[0]: ^
2023-06-30 12:29:01.638 - error: host.smarthome Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node'
2023-06-30 12:29:01.638 - error: host.smarthome Caught by controller[0]: was compiled against a different Node.js version using
2023-06-30 12:29:01.639 - error: host.smarthome Caught by controller[0]: NODE_MODULE_VERSION 93. This version of Node.js requires
2023-06-30 12:29:01.639 - error: host.smarthome Caught by controller[0]: NODE_MODULE_VERSION 108. Please try re-compiling or re-installing
2023-06-30 12:29:01.640 - error: host.smarthome Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`).
2023-06-30 12:29:01.641 - error: host.smarthome Caught by controller[0]: at Module._extensions..node (node:internal/modules/cjs/loader:1340:18)
2023-06-30 12:29:01.641 - error: host.smarthome Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32)
2023-06-30 12:29:01.642 - error: host.smarthome Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:960:12)
2023-06-30 12:29:01.642 - error: host.smarthome Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19)
2023-06-30 12:29:01.642 - error: host.smarthome Caught by controller[0]: at require (node:internal/modules/cjs/helpers:110:18)
2023-06-30 12:29:01.643 - error: host.smarthome Caught by controller[0]: at bindings (/opt/iobroker/node_modules/bindings/bindings.js:112:48)
2023-06-30 12:29:01.643 - error: host.smarthome Caught by controller[0]: at Object. (/opt/iobroker/node_modules/@serialport/bindings/lib/linux.js:2:36)
2023-06-30 12:29:01.643 - error: host.smarthome Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1256:14)
2023-06-30 12:29:01.644 - error: host.smarthome Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1310:10)
2023-06-30 12:29:01.644 - error: host.smarthome Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32) {
2023-06-30 12:29:01.645 - error: host.smarthome Caught by controller[0]: code: 'ERR_DLOPEN_FAILED'
2023-06-30 12:29:01.645 - error: host.smarthome Caught by controller[0]: }
2023-06-30 12:29:01.645 - error: host.smarthome Caught by controller[0]: Node.js v18.16.1
2023-06-30 12:29:01.646 - error: host.smarthome instance system.adapter.selverf.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
2023-06-30 12:30:29.497 - error: host.smarthome iobroker npm-rebuild: Rebuilding native modules failed

Thomas Braun

@mp_trixi sagte in Wechselnde USB-Stick mounts nach Neustart:

/opt/iobroker/node_modules/@serialport/bindings

Das Verzeichnis gibt es auf meinem System gar nicht.
Keine Ahnung was das da bei dir ist.
Ist aber was für einen eigenen Thread.

MP_Trixi

@thomas-braun
ok - keine Ahnung wo ich das her habe. In dem Verzeichnis ist eine README.md

  GNU nano 5.4                                                                                                              README.md
# @serialport/Bindings

The `Binding` is how Node-SerialPort talks to the underlying system. By default, we auto detect Windows, Linux and OS X, and load the appropriate module for your system. You can assign `SerialPort.Binding` to any binding you like. Find more by searchin>

Learn more at our [bindings documentation](https://serialport.io/docs/api-bindings) page.

# Android users

When using termux there is a way to compile serialport to be used under Android

```sh
CFLAGS=-fPIC CXXFLAGS=-fPIC yarn rebuild

Habe nochmals iob stop und iob start gemacht. Jetzt sind alle Fehler weg (vlt. hat das "rebuilding native modules" doch funktioniert. So passt es erstmal für mich. Falls das wieder auftaucht mache ich einen neues Thema auf. Danke Dir nochmals.

Thomas Braun

@mp_trixi

iob diag

sagt dazu?

MP_Trixi

@thomas-braun
glaub da hab ich (auch) noch einen Hund drin:

Used repository: stable
Cannot download repository hash file from "http://download.iobroker.net/sources-dist-hash.json": timeout of 10000ms exceeded
Cannot download repository file from "http://download.iobroker.net/sources-dist.json": timeout of 10000ms exceeded

die gesamte Ausgabe:

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 13:39:13 up  2:06,  2 users,  load average: 0.85, 1.14, 1.15
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=52.1'C
volt=0.9160V

*** Time and Time Zones ***
               Local time: Fri 2023-06-30 13:39:13 CEST
           Universal time: Fri 2023-06-30 11:39:13 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        2.4G        537M        0.0K        904M        1.4G
Swap:            99M          0B         99M
Total:          3.9G        2.4G        637M

         3794 M total memory
         2352 M used memory
         2485 M active memory
          424 M inactive memory
          537 M free memory
           49 M buffer memory
          854 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       28G   12G   15G  45% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  844K  759M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   31M  222M  13% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Jun 30 11:32:49 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:62:A2:E5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=cf73e54d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Jun 30 11:32:50 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Fri Jun 30 11:32:50 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Jun 30 11:32:52 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
4.0G    /var/
3.2G    /var/log
2.8G    /var/log/journal/6c5b87a59f584c03b6491451f2e5b6da
2.8G    /var/log/journal
479M    /var/lib

Archived and active journals take up 2.7G in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
3.6G    /opt/iobroker/iobroker-data/
3.0G    /opt/iobroker/iobroker-data/history
458M    /opt/iobroker/iobroker-data/files
95M     /opt/iobroker/iobroker-data/backup-objects
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png

The five largest files in iobroker-data are:
51M     /opt/iobroker/iobroker-data/states.jsonl
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
29M     /opt/iobroker/iobroker-data/objects.jsonl
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
8.6M    /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.1
/usr/bin/node           v18.16.1
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.1-deb-1nodesource1
  Candidate: 18.16.1-deb-1nodesource1
  Version table:
 *** 18.16.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.alexa2.0                 : alexa2                : smarthome                                -  enabled
+ system.adapter.backitup.0               : backitup              : smarthome                                -  enabled
  system.adapter.bmw.0                    : bmw                   : smarthome                                - disabled
  system.adapter.devices.0                : devices               : smarthome                                -  enabled
  system.adapter.discovery.0              : discovery             : smarthome                                - disabled
+ system.adapter.energiefluss.0           : energiefluss          : smarthome                                -  enabled
  system.adapter.feiertage.0              : feiertage             : smarthome                                -  enabled
  system.adapter.habpanel.0               : habpanel              : smarthome                                - disabled
+ system.adapter.harmony.0                : harmony               : smarthome                                -  enabled
  system.adapter.heatingcontrol.0         : heatingcontrol        : smarthome                                - disabled
+ system.adapter.history.0                : history               : smarthome                                -  enabled
  system.adapter.homeconnect.0            : homeconnect           : smarthome                                - disabled
+ system.adapter.hue-extended.0           : hue-extended          : smarthome                                -  enabled
  system.adapter.ical.0                   : ical                  : smarthome                                -  enabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: smarthome                                - disabled
  system.adapter.icons-icons8.0           : icons-icons8          : smarthome                                -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : smarthome                                - disabled
  system.adapter.icons-material-svg.0     : icons-material-svg    : smarthome                                -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : smarthome                                - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: smarthome                                -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : smarthome                                - disabled
+ system.adapter.influxdb.0               : influxdb              : smarthome                                -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : smarthome                                -  enabled
  system.adapter.javascript.1             : javascript            : smarthome                                - disabled
+ system.adapter.logparser.0              : logparser             : smarthome                                -  enabled
+ system.adapter.meross.0                 : meross                : smarthome                                -  enabled
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : smarthome                                -  enabled, port: 54321
+ system.adapter.modbus.0                 : modbus                : smarthome                                -  enabled
+ system.adapter.myenergi.0               : myenergi              : smarthome                                -  enabled
+ system.adapter.net-tools.0              : net-tools             : smarthome                                -  enabled
  system.adapter.openweathermap.0         : openweathermap        : smarthome                                -  enabled
  system.adapter.powerfox2.0              : powerfox2             : smarthome                                -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : smarthome                                -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : smarthome                                -  enabled
  system.adapter.schoolfree.0             : schoolfree            : smarthome                                -  enabled
+ system.adapter.selverf.0                : selverf               : smarthome                                -  enabled
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : smarthome                                -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : smarthome                                -  enabled
+ system.adapter.synology.0               : synology              : smarthome                                -  enabled, port: 5501
+ system.adapter.telegram.0               : telegram              : smarthome                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.trashschedule.0          : trashschedule         : smarthome                                -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : smarthome                                -  enabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : smarthome                                -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : smarthome                                -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : smarthome                                -  enabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : smarthome                                - disabled
  system.adapter.vis-map.0                : vis-map               : smarthome                                -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : smarthome                                -  enabled
  system.adapter.vis-material-webfont.0   : vis-material-webfont  : smarthome                                -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : smarthome                                -  enabled
  system.adapter.vis-metro.0              : vis-metro             : smarthome                                -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : smarthome                                -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : smarthome                                -  enabled
  system.adapter.vis-weather.0            : vis-weather           : smarthome                                -  enabled
  system.adapter.vis.0                    : vis                   : smarthome                                -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : smarthome                                -  enabled
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : smarthome                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : smarthome                                -  enabled
+ system.adapter.zigbee.0                 : zigbee                : smarthome                                -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : smarthome                                -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.influxdb.0               : influxdb              : smarthome                                -  enabled, port: 8086
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : smarthome                                -  enabled, port: 54321
+ system.adapter.shelly.0                 : shelly                : smarthome                                -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : smarthome                                -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.synology.0               : synology              : smarthome                                -  enabled, port: 5501
+ system.adapter.telegram.0               : telegram              : smarthome                                -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : smarthome                                -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : smarthome                                -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : smarthome                                -  enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Cannot download repository hash file from "http://download.iobroker.net/sources-dist-hash.json": timeout of 10000ms exceeded
Cannot download repository file from "http://download.iobroker.net/sources-dist.json": timeout of 10000ms exceeded
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "bmw"          : 2.5.7    , installed 2.5.7
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "habpanel"     : 0.5.0    , installed 0.5.0
Adapter    "harmony"      : 1.2.2    , installed 1.2.2
Adapter    "heatingcontrol": 2.10.6  , installed 2.10.6
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "homeconnect"  : 1.1.1    , installed 1.1.1
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "logparser"    : 2.2.0    , installed 2.2.0
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "mihome-vacuum": 3.11.0   , installed 3.8.8  [Updatable]
Adapter    "modbus"       : 5.0.11   , installed 5.0.5  [Updatable]
Adapter    "myenergi"     : 0.0.3    , installed 0.0.3
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "openweathermap": 0.3.9   , installed 0.3.9
Adapter    "powerfox2"    : 0.0.12   , installed 0.0.12
Adapter    "pvforecast"   : 2.7.1    , installed 2.7.1
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "schoolfree"   : 1.1.1    , installed 1.1.1
Adapter    "selverf"      : 0.6.2    , installed 0.6.2
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "telegram"     : 1.15.6   , installed 1.15.6
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.94.0   , installed 0.94.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-map"      : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "vw-connect"   : 0.0.67   , installed 0.0.67
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "yahka"        : 0.17.0   , installed 0.17.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        22939
States:         20151

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:7 https://apt.grafana.com stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1599       567/sshd: /usr/sbin
tcp        0      0 127.0.0.1:43849         0.0.0.0:*               LISTEN      1001       203072     20754/io.yahka.0
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       195347     20296/iobroker.js-c
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       196046     20296/iobroker.js-c
tcp        0      0 0.0.0.0:44833           0.0.0.0:*               LISTEN      1001       197534     20754/io.yahka.0
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        13821      685/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          1601       567/sshd: /usr/sbin
tcp6       0      0 :::3000                 :::*                    LISTEN      109        14815      781/grafana
tcp6       0      0 :::61991                :::*                    LISTEN      1001       198206     20809/io.harmony.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       197442     20686/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       193454     20314/io.admin.0
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       197458     20702/io.simple-api
tcp6       0      0 :::8086                 :::*                    LISTEN      999        15464      685/influxd
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       198412     20957/io.ws.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13668      450/avahi-daemon: r
udp        0      0 0.0.0.0:50618           0.0.0.0:*                           108        13670      450/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       196946     20466/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13754      681/dhcpcd
udp        0      0 0.0.0.0:53421           0.0.0.0:*                           1001       196391     20526/io.mihome-vac
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1001       198207     20809/io.harmony.0
udp6       0      0 :::5353                 :::*                                108        13669      450/avahi-daemon: r
udp6       0      0 :::52628                :::*                                108        13671      450/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-06-30 13:36:55.841  - info: meross.0 (20394) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available
2023-06-30 13:36:55.842  - warn: meross.0 (20394) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined
2023-06-30 13:37:00.087  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 21840
2023-06-30 13:37:02.788  - info: powerfox2.0 (21840) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v18.16.1, js-controller: 4.0.24
2023-06-30 13:37:06.051  - info: powerfox2.0 (21840) Terminated (NO_ERROR): Without reason
2023-06-30 13:37:06.590  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)
2023-06-30 13:38:00.147  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 21964
2023-06-30 13:38:01.985  - info: meross.0 (20394) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available
2023-06-30 13:38:01.986  - warn: meross.0 (20394) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined
2023-06-30 13:38:03.224  - info: powerfox2.0 (21964) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v18.16.1, js-controller: 4.0.24
2023-06-30 13:38:08.782  - info: powerfox2.0 (21964) Terminated (NO_ERROR): Without reason
2023-06-30 13:38:09.342  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)
2023-06-30 13:39:00.416  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 22100
2023-06-30 13:39:03.039  - info: powerfox2.0 (22100) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v18.16.1, js-controller: 4.0.24
2023-06-30 13:39:06.781  - info: powerfox2.0 (22100) Terminated (NO_ERROR): Without reason
2023-06-30 13:39:07.324  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)
2023-06-30 13:39:08.129  - info: meross.0 (20394) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available
2023-06-30 13:39:08.130  - warn: meross.0 (20394) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined
2023-06-30 13:40:00.066  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 22476
2023-06-30 13:40:04.557  - info: powerfox2.0 (22476) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v18.16.1, js-controller: 4.0.24
2023-06-30 13:40:08.816  - info: powerfox2.0 (22476) Terminated (NO_ERROR): Without reason
2023-06-30 13:40:09.357  - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR)
2023-06-30 13:40:14.433  - info: meross.0 (20394) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available
2023-06-30 13:40:14.434  - warn: meross.0 (20394) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined
2023-06-30 13:41:00.122  - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 23598

DJMarc75

@mp_trixi bei einem 4GB System über 50 Adapter ist nicht grad "gesund" ;)

Thomas Braun

@mp_trixi

Schaut okay aus.
Zu dem Repo: Versuch mal die sog. 'live'-Quelle einzubinden.
Hab da aber gerade die Befehle dazu nicht zur Hand.

Community Forum

NEWS

Wechselnde USB-Stick mounts nach Neustart

Support us

728

32.6k

82.2k

1.3m