@phillipssc said in New Adapter for rtl_433 incoming data:

344975000 -f 433920000

thanks for your
Answer. I switched to the current version. Unfortunately, I get the following error message listed below
and in the adapter
the settings cannot be saved.

rtl_433.0 2021-03-26 11:51:26.329 error (13236) rtl_433 disconnected
rtl_433.0 2021-03-26 11:51:26.326 error (13236) rtl_433 disconnected
rtl_433.0 2021-03-26 11:51:26.248 error (13236) TypeError: Cannot read property 'val' of null at /opt/iobroker/node_modules/iobroker.rtl_433/lib/brokerInterface.js:129:46 at /opt/iobroker/node_modules/iobroker.js-controller/lib/stat
rtl_433.0 2021-03-26 11:51:26.240 error (13236) uncaught exception: Cannot read property 'val' of null
rtl_433.0 2021-03-26 11:51:15.412 error (13175) rtl_433 disconnected
rtl_433.0 2021-03-26 11:51:15.407 error (13175) rtl_433 disconnected
rtl_433.0 2021-03-26 11:51:15.313 error (13175) TypeError: Cannot read property 'val' of null at /opt/iobroker/node_modules/iobroker.rtl_433/lib/brokerInterface.js:129:46 at /opt/iobroker/node_modules/iobroker.js-controller/lib/stat
rtl_433.0 2021-03-26 11:51:15.304 error (13175) uncaught exception: Cannot read property 'val' of null
rtl_433.0 2021-03-26 11:51:06.473 error (13139) TypeError: Cannot read property 'val' of null at /opt/iobroker/node_modules/iobroker.rtl_433/lib/brokerInterface.js:129:46 at /opt/iobroker/node_modules/iobroker.js-controller/lib/stat
rtl_433.0 2021-03-26 11:51:06.469 error (13139) uncaught exception: Cannot read property 'val' of null
rtl_433.0 2021-03-26 11:51:06.348 error (13139) rtl_433 disconnected
rtl_433.0 2021-03-26 11:51:06.339 error (13139) rtl_433 disconnected
rtl_433.0 2021-03-26 11:50:55.427 error (13097) rtl_433 disconnected
rtl_433.0 2021-03-26 11:50:55.422 error (13097) rtl_433 disconnected
rtl_433.0 2021-03-26 11:50:55.342 error (13097) TypeError: Cannot read property 'val' of null at /opt/iobroker/node_modules/iobroker.rtl_433/lib/brokerInterface.js:129:46 at /opt/iobroker/node_modules/iobroker.js-controller/lib/stat

OK ich glaube das wär zu viel Aufwand für einen Einzelfall.
Danke für die Mühe.

@phillipssc
Hi,
I think your adapter is great! He managed to read out the data from my weather station immediately. Please develop further.
A request from me about this. Would it be possible that the adapter changes the frequency at fixed times or at certain intervals for a certain time?

@WW1983 Danke es geht

@klassisch
yes this is how the adapter works.
It recognizes a large number of devices and also works simultaneously in the frequency range of approx. 433-868Mhz. The only disadvantage as far as I know you can only receive data.
Sending is not possible.

@jayjay-0
Hallo, sorry das ich mich jetzt erst melde.
Ich habe einige Versuche mit den ursprünglichen python skripts gemacht und konnte die Werte auslesen.
Ich denke, das es an meinem Inverter Modell liegt. In den python skripts wir dieses abgefragt. Als ich das
auf XS geändert hatte wurde eine Verbindung aufgebaut.
= RESTART: C:\Users\rene\AppData\Local\Programs\Python\Python311-32\Scripts\goodwe-master\tests\inverter_test2.py
Identified inverter:
Model: GW2000XS11
SerialNr: 52000SST22CW0209
Firmware: 56.56.34

Sensors values:
timestamp : Timestamp = 2023-08-14 13:08:10
vpv1 : PV1 Voltage = 162.8 V
ipv1 : PV1 Current = 12.5 A
ppv1 : PV1 Power = 2035 W
vpv2 : PV2 Voltage = 0.0 V
ipv2 : PV2 Current = 0.0 A
ppv2 : PV2 Power = 0 W
vline1 : On-grid L1-L2 Voltage = -0.1 V
vgrid1 : On-grid L1 Voltage = 238.5 V
igrid1 : On-grid L1 Current = 8.3 A
fgrid1 : On-grid L1 Frequency = 49.98 Hz
pgrid1 : On-grid L1 Power = 1980 W
ppv : PV Power = 1981 W
work_mode : Work Mode code = 1
work_mode_label : Work Mode = Normal
error_codes : Error Codes = 0
warning_code : Warning code = 0
temperature : Inverter Temperature = 54.7 C
e_day : Today's PV Generation = 5.5 kWh
e_total : Total PV Generation = 934.8 kWh
h_total : Hours Total = 1970 h
safety_country : Safety Country code = 2
safety_country_label : Safety Country = Germany
funbit : FunBit = 1362
vbus : Bus Voltage = 378.5 V
vnbus : NBus Voltage = -0.1 V

Vieleich kann ja jemand das Modell in den Adapter integrieren.

@paeppi
Das hab ich so auch gemacht. Leider keine Verbindung.
Gibt es noch Einstellungen die ich am Gleichrichter vornehmen muss?

@jayjay-0
Hier mal die Einstellungen im WLAN Stick

@jayjay-0
WIFI

@jayjay-0
Hallo,
ich versuche schon seit einigen Tagen den Adapters von @FossyTom zum Laufen zu bekommen.
Leider bekomme ich keine Verbindung.
Kannst du mir mal ein paar Tips geben welche Einstellungen nötig sind?

@fossytom Hi erstmal Danke für deine Arbeit.
Ich habe den Adapter installiert und die IP eingetragen.
leider verbindet er sich nicht da wahrscheinlich die Zugangsdaten falsch sind.
Wo sind die Anmeldedaten hinterlegt?

Was ist Profil0?
Hallo ich habe gerade ein Verständnisproblem.
Ich habe alle meine Heizzeiten in Profil 1 gespeichert.
Dieses möchte ich auch unbedingt verwenden. Leider verwendet HeatingControl immer Profil0. Das auch immer wieder angelegt wird.
Was mache ich falsch?

@klassisch
yes this is how the adapter works.
It recognizes a large number of devices and also works simultaneously in the frequency range of approx. 433-868Mhz. The only disadvantage as far as I know you can only receive data.
Sending is not possible.

@phillipssc
Hello, I've now found time to deal with the problem.
I updated the rtl_433 installation (not adapter). After that I got better logs and could
customize the command line like this:
rtl_433 -F json -f 868000000 -s 1024000 -f 433920000 -s 250000 -H 300 and it runs.
I think there is the problem in the adapter that the command line is not created correctly.
Still, the adapter is awesome!

@phillipssc That was without input in the adapter and without rtl_433.conf
when i enter my frequency it looks like this:
rtl_433.0 2021-04-02 10:53:24.746 debug (5309) rtl_433.0.TFA-Pool-28: dead
rtl_433.0 2021-04-02 10:53:24.682 debug (5309) Checking for dead devices...
rtl_433.0 2021-04-02 10:53:08.926 debug (5309) sendTo "rtl_433" to system.adapter.admin.0 from system.adapter.rtl_433.0
rtl_433.0 2021-04-02 10:53:07.858 debug (5309) sendTo "rtl_433" to system.adapter.admin.0 from system.adapter.rtl_433.0
rtl_433.0 2021-04-02 10:53:06.770 debug (5309) sendTo "rtl_433" to system.adapter.admin.0 from system.adapter.rtl_433.0
rtl_433.0 2021-04-02 10:53:05.727 debug (5309) sendTo "rtl_433" to system.adapter.admin.0 from system.adapter.rtl_433.0
rtl_433.0 2021-04-02 10:53:04.688 debug (5309) sendTo "rtl_433" to system.adapter.admin.0 from system.adapter.rtl_433.0
rtl_433.0 2021-04-02 10:53:03.653 debug (5309) sendTo "rtl_433" to system.adapter.admin.0 from system.adapter.rtl_433.0
rtl_433.0 2021-04-02 10:53:02.518 debug (5309) sendTo "rtl_433" to system.adapter.admin.0 from system.adapter.rtl_433.0
rtl_433.0 2021-04-02 10:53:02.487 debug (5309) sendTo "listSerial" to system.adapter.admin.0 from system.adapter.rtl_433.0
rtl_433.0 2021-04-02 10:52:54.676 info (5309) Go to https://github.com/merbanan/rtl_433 to for installation instructions
rtl_433.0 2021-04-02 10:52:54.674 error (5309) rtl_433 error: {"code":"ERR_INVALID_ARG_VALUE"}
rtl_433.0 2021-04-02 10:52:54.659 info (5309) spawning: -F json -C -f 868000000

Another question where can you set the sample rate.
I would test the frequency change if the basic settings work