RPI 4 Update auf ?
-
@thomas-braun sagte in RPI 4 Update auf ?:
Da läuft dir ein Skript aus dem Ruder.
kann ich erkennen welches das ist....ja ein paar
-
Nein, nur durch testen. Die Skripte alle ausschalten, die Hälfte wieder starten, etwas länger beobachten.
So das ganze eingrenzen. -
@thomas-braun sagte in RPI 4 Update auf ?:
Nein, nur durch testen. Die Skripte alle ausschalten, die Hälfte wieder starten, etwas länger beobachten.
So das ganze eingrenzen.Ok dann mache ich mich an den Punkt.
So langsam kreisen wir den Fehler ein, aber ich lerne auch daraus.melde mich ...sobald ich wieder was dazu schrieben kann.
-
Sodele,
kreuz und quer Skripte abgeschalten und kein erfolg.
soll ich wieder die Ergebnisse posten top,Iob Diag?
-
@bob-der-1 Du bist mit dem Javascript-Adapter auf "BETA". Gehe doch mal testweise auf die stable Version 7.0.3 zurück.
Ro.75
-
@ro75
erledigt,auch nicht besser....
hatte den JS Adapter auch ganz aus....on daher kann es kein einzelnes Skript sein. -
@bob-der-1 dann alle Skripte aus. Wie ist es dann?
Wenn ok, dann ein Skript an, beobachten - wieder aus und wiederholen mit dem nächsten Skript. Bis du durch bist.
Ro75.
-
@bob-der-1 sagte in RPI 4 Update auf ?:
hatte den JS Adapter auch ganz aus....on daher kann es kein einzelnes Skript sein.
Tolle Info.
Mach bitte mal den "fb-checkpresence" und "Alexa2" Adapter auf STOPP.
Wie ist es dann?
-
Also ich habe alle Skripte nacheinander ausgeschalten und auf Aus gelassen.
Aann ausgeschlaten und wieder an das nur eins Aus ist.
Alle Aus aber Adapter an.
Adapter Aus.das war mit dem 7.11er und da war keine Verbesserung, mit dem /.0.3 auch nicht wenn ich ihn aus lasse, reboot bringt da auch keine Verbesserung.
Mittlerweile habe ich nochmal das netzteil getauscht, die Lankabel getauscht , ein andere Gerät ans Lankabel und zu guter letzt nur 4 Adapter angehabt.
Admin,web,Backup und Deconz.......auch nicht viel besser
-
@bob-der-1 wie sehen den die Werte bei top aus, wenn nur diese 4 Adapter an sind?
-
@ro75
Moment................wird sofort gemacht, wenn alle adpater aus sind bis auf die 4 sieht das so 22 s auf meinem PC aus.
An anderen Endgeräten dito.
-
top - 11:45:22 up 22:34, 1 user, load average: 1.37, 1.76, 1.71 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.7 us, 4.6 sy, 0.0 ni, 92.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7811.3 total, 3412.0 free, 1526.9 used, 2872.5 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 6145.6 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 528 root 20 0 31036 17180 7796 S 6.6 0.2 77:53.35 python3 515 iobroker 20 0 1839580 995936 42260 S 0.7 12.5 464:46.35 iobroker.js-con 3790824 root 20 0 0 0 0 I 0.3 0.0 0:00.42 kworker/u8:2-events_unbound 3835767 root 20 0 0 0 0 I 0.3 0.0 0:00.08 kworker/0:2-events 3837647 pi 20 0 16068 4676 3432 S 0.3 0.1 0:00.01 sshd 3837765 pi 20 0 10012 3324 2720 R 0.3 0.0 0:00.08 top 1 root 20 0 165224 10112 7376 S 0.0 0.1 0:43.75 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.14 kthreadd 3 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 netns 8 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/0:0H-kblockd 10 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 I 0.0 0.0 0:00.00 rcu_tasks_kthread 12 root 20 0 0 0 0 I 0.0 0.0 0:00.00 rcu_tasks_rude_kthread 13 root 20 0 0 0 0 I 0.0 0.0 0:00.00 rcu_tasks_trace_kthread 14 root 20 0 0 0 0 S 0.0 0.0 0:53.14 ksoftirqd/0 15 root 20 0 0 0 0 I 0.0 0.0 3:35.08 rcu_preempt 16 root rt 0 0 0 0 S 0.0 0.0 0:00.93 migration/0 17 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/0 18 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/1 19 root rt 0 0 0 0 S 0.0 0.0 0:00.84 migration/1 20 root 20 0 0 0 0 S 0.0 0.0 0:22.00 ksoftirqd/1 22 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/1:0H-events_highpri 23 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/2 24 root rt 0 0 0 0 S 0.0 0.0 0:00.85 migration/2 25 root 20 0 0 0 0 S 0.0 0.0 0:22.17 ksoftirqd/2 27 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/2:0H-kblockd 28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/3 29 root rt 0 0 0 0 S 0.0 0.0 0:00.85 migration/3 30 root 20 0 0 0 0 S 0.0 0.0 0:21.68 ksoftirqd/3 32 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/3:0H-kblockd 33 root 20 0 0 0 0 S 0.0 0.0 0:00.01 kdevtmpfs 34 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 inet_frag_wq 36 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kauditd 38 root 20 0 0 0 0 S 0.0 0.0 0:00.09 khungtaskd 40 root 20 0 0 0 0 S 0.0 0.0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 writeback 42 root 20 0 0 0 0 S 0.0 0.0 0:04.07 kcompactd0 43 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kintegrityd 44 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kblockd 45 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 blkcg_punt_bio 46 root -51 0 0 0 0 S 0.0 0.0 0:00.00 watchdogd 50 root 0 -20 0 0 0 I 0.0 0.0 0:03.71 kworker/1:1H-kblockd 51 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rpciod 52 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 xprtiod 55 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kswapd0 56 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 nfsiod 57 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kthrotld 65 root 20 0 0 0 0 S 0.0 0.0 0:00.04 hwrng 66 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 iscsi_conn_clea 67 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 nvme-wq 68 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 nvme-reset-wq 69 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 nvme-delete-wq 71 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 DWC Notificatio -
@bob-der-1 Warum steht der Port vom Admin auf 7777 ?
Zeig doch nochmal die Langfassung von
iob diagdiesmal bitte komplett und unbearbeitet !
-
@djmarc75
weil auf 8081 was anderes rennt!
Phyton3 ist für das Status display OLED am Pi für das System.
aber erst seit 3 Tagen... -
@bob-der-1
was macht das python da?
ist zwar nicht soviel und kann auch nur temporär sein,
aber python gehört erst mal nicht zum iob im standardauch der js-controller verbrauch relativ viel speicher
-
@oliverio ```
======== Start marking the full check here =========Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 11:50:26 up 22:39, 1 user, load average: 4.50, 3.39, 2.37 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=65.7'C volt=0.9460V *** Time and Time Zones *** Local time: Wed 2023-08-16 11:50:26 CEST Universal time: Wed 2023-08-16 09:50:26 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 3.3G 1.7G 1.0M 2.9G 4.4G Swap: 99M 0B 99M Total: 7.9G 3.3G 1.8G 7811 M total memory 3260 M used memory 3375 M active memory 2432 M inactive memory 1671 M free memory 139 M buffer memory 2739 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 4.9G 101G 5% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.1M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Aug 15 13:10:38 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:E2:27:44 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=818b53ba-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Aug 15 13:10:42 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Aug 15 13:10:42 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Tue Aug 15 13:10:45 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 598M /var/ 262M /var/cache 257M /var/cache/apt 156M /var/cache/apt/archives 148M /var/lib Archived and active journals take up 80.0M in the file system. /opt/iobroker/backups: 89M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 680M /opt/iobroker/iobroker-data/ 423M /opt/iobroker/iobroker-data/files 144M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 70M /opt/iobroker/iobroker-data/objects.jsonl 44M /opt/iobroker/iobroker-data/states.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.0.3 Adapters from github: 4 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 7777, bind: 192.168.178.70, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.broadlink2.0 : broadlink2 : raspberrypi - disabled system.adapter.bydbatt.0 : bydbatt : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.device-reminder.0 : device-reminder : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled system.adapter.enigma2.0 : enigma2 : raspberrypi - disabled system.adapter.enigma2.1 : enigma2 : raspberrypi - disabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled system.adapter.gartenbewaesserung.0 : gartenbewaesserung : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.homeconnect.0 : homeconnect : raspberrypi - disabled system.adapter.homekit-controller.0 : homekit-controller : raspberrypi - disabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lg-thinq.0 : lg-thinq : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.linux-control.0 : linux-control : raspberrypi - enabled system.adapter.mihome-cloud.0 : mihome-cloud : raspberrypi - disabled system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - disabled, port: 54321 system.adapter.mihome.0 : mihome : raspberrypi - disabled, port: 9898, bind: 192.168.178.70 + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1889, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : raspberrypi - enabled + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.parcel.0 : parcel : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled system.adapter.plex.0 : plex : raspberrypi - disabled + system.adapter.ring.0 : ring : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1888, bind: 192.168.178.70 + system.adapter.signal-cmb.0 : signal-cmb : raspberrypi - enabled + system.adapter.sma-em.0 : sma-em : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.upnp.0 : upnp : raspberrypi - enabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: raspberrypi - disabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - disabled system.adapter.vis-keyboard.0 : vis-keyboard : raspberrypi - disabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : raspberrypi - disabled system.adapter.vis-material.0 : vis-material : raspberrypi - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-players.0 : vis-players : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 7777, bind: 192.168.178.70, run as: admin + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1889, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: 1888, bind: 192.168.178.70 + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json live-stable : http://iobroker.live/repo/sources-dist.json live-beta : http://iobroker.live/repo/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.24.1 , installed 3.24.1 Adapter "alias-manager": 1.2.4 , installed 1.2.6 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "bydbatt" : 1.0.8 , installed 1.0.8 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "discovery" : 3.1.0 , installed 3.2.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 2.0.11 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "lg-thinq" : 0.1.4 , installed 0.1.4 Adapter "lgtv" : 1.1.10 , installed 1.1.12 Adapter "linux-control": 1.1.3 , installed 1.1.5 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-cloud" : 0.1.0 , installed 0.1.0 Adapter "mihome-vacuum": 3.11.0 , installed 3.11.0 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "openweathermap": 0.3.9 , installed 0.3.11 Adapter "parcel" : 0.0.27 , installed 0.0.32 Adapter "ping" : 1.5.3 , installed 1.6.2 Adapter "plex" : 0.9.1 , installed 0.9.1 Adapter "ring" : 3.2.2 , installed 3.4.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "signal-cmb" : 0.3.0 , installed 0.3.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "sma-em" : 0.7.0 , installed 0.7.0 Adapter "socketio" : 4.2.0 , installed 6.4.0 Adapter "sonoff" : 2.5.3 , installed 2.5.7 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.4.2, installed 3.4.2 Adapter "web" : 4.3.0 , installed 6.0.3 Adapter "wled" : 0.6.7 , installed 0.7.0 Adapter "ws" : 1.3.0 , installed 2.4.0 Objects and States Please stand by - This may take a while Objects: 23872 States: 21213 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.70:7777 0.0.0.0:* LISTEN 1001 17959 1219/io.admin.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 3636 515/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16290 515/iobroker.js-con tcp 0 0 0.0.0.0:1889 0.0.0.0:* LISTEN 1001 21072230 3843853/io.mqtt.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 21070792 3846107/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 21067522 3844764/io.sonoff.0 tcp 0 0 192.168.178.70:1888 0.0.0.0:* LISTEN 1001 21072476 3844491/io.shelly.1 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 3468 541/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 434743 83164/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 21071009 3844612/io.socketio tcp6 0 0 :::22 :::* LISTEN 0 3470 541/sshd: /usr/sbin udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 21062284 3845218/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 3429 399/avahi-daemon: r udp 0 0 0.0.0.0:9522 0.0.0.0:* 1001 21069400 3844522/io.sma-em.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 21076098 3844456/io.shelly.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 21073534 3845067/io.upnp.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 21016026 3835468/io.deconz.0 udp 0 0 0.0.0.0:40470 0.0.0.0:* 1001 21067342 3845067/io.upnp.0 udp 0 0 0.0.0.0:36921 0.0.0.0:* 108 3431 399/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14688 1046/dhcpcd udp6 0 0 :::546 :::* 0 14753 1046/dhcpcd udp6 0 0 :::5353 :::* 108 3430 399/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 21016028 3835468/io.deconz.0 udp6 0 0 :::1900 :::* 1001 21016027 3835468/io.deconz.0 udp6 0 0 :::51624 :::* 108 3432 399/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-08-16 11:50:28.242 - info: openweathermap.0 (3844037) Terminated (NO_ERROR): Without reason 2023-08-16 11:50:29.049 - info: host.raspberrypi instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-08-16 11:50:30.846 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 59(WDMyCloud/00:14:EE:0C:32:F1) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:50:41.728 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 0(HUAWEI-Luca/A8:E5:44:AB:F6:F9) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:50:43.329 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 11(Boss-PC/50:E5:49:5B:E8:DD) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:50:43.749 - info: alexa2.0 (3841818) Unknown Device, but enabling commands, Try it and report back if commands work. 2023-08-16 11:50:43.749 - info: alexa2.0 (3841818) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2023-08-16 11:50:43.751 - info: alexa2.0 (3841818) Device-type:A3I1LR45Q7T74C - Markus's Newton (Newton) (DEREGISTER_DEVICE,TUNE_IN,SET_TIME_ZONE,DEEZER,SLEEP,TIDAL,REMINDERS,MULTI_WAKEWORDS_SUPPORTED,CUSTOM_ALARM_TONE,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,MUSIC_SKILL,SUPPORTS_LOCALE,APPLE_MUSIC,ADAPTIVE_LISTENING,I_HEART_RADIO,SET_LOCALE,SPEECH_RECOGNIZER_USS,VOLUME_SETTING,MICROPHONE,CHANGE_NAME,AUDIBLE,GOLDFISH,SOUND_SETTINGS,HANDS_FREE,DREAM_TRAINING,AMAZON_MUSIC,SIRIUSXM,TOUCH_INITIATED,KINDLE_BOOKS,AUDIO_PLAYER,TIMERS_AND_ALARMS,PERSISTENT_CONNECTION,EARCONS) 2023-08-16 11:50:44.544 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 17(Android-3/74:D4:23:02:D7:3A) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:50:51.378 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 59(WDMyCloud/00:14:EE:0C:32:F1) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:02.611 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 0(HUAWEI-Luca/A8:E5:44:AB:F6:F9) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:04.403 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 11(Boss-PC/50:E5:49:5B:E8:DD) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:05.769 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 17(Android-3/74:D4:23:02:D7:3A) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:12.549 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 59(WDMyCloud/00:14:EE:0C:32:F1) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:16.821 - info: fb-checkpresence.0 (3842563) createFbDeviceObjects finished successfully 2023-08-16 11:51:16.828 - info: fb-checkpresence.0 (3842563) states successfully subscribed 2023-08-16 11:51:16.830 - info: fb-checkpresence.0 (3842563) loop successfully started 2023-08-16 11:51:24.147 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 0(HUAWEI-Luca/A8:E5:44:AB:F6:F9) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:26.051 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 11(Boss-PC/50:E5:49:5B:E8:DD) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:27.289 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 17(Android-3/74:D4:23:02:D7:3A) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:34.231 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 59(WDMyCloud/00:14:EE:0C:32:F1) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:45.157 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 0(HUAWEI-Luca/A8:E5:44:AB:F6:F9) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:46.920 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 11(Boss-PC/50:E5:49:5B:E8:DD) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:48.358 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 17(Android-3/74:D4:23:02:D7:3A) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500} 2023-08-16 11:51:55.893 - info: tr-064.0 (3844816) forEachConfiguredDevice: in GetSpecificHostEntry 59(WDMyCloud/00:14:EE:0C:32:F1) device seems offline but we never saw it since adapter was started:Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: 500 - {"code":500}============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
-
@oliverio sagte in RPI 4 Update auf ?:
@bob-der-1
was macht das python da?
ist zwar nicht soviel und kann auch nur temporär sein,
aber python gehört erst mal nicht zum iob im standardauch der js-controller verbrauch relativ viel speicher
Phyton3 ist für das Status display OLED am Pi für das System.
aber erst seit 3 Tagen... -
Bin mal Afk, hab leider Rufbereitschaft.
sollte fix gehen. -
@bob-der-1 sagte in RPI 4 Update auf ?:
load average: 4.50, 3.39, 2.37
da läuft noch irgendwas.
ein pi4 8gb sollte nicht so hoch ausgelastet sein. -
@bob-der-1 sagte in RPI 4 Update auf ?:
weil auf 8081 was anderes rennt!
ich seh da nichts auf 8081 laufen
