NEWS
Troubleshooting NodeJS update
Installation
504
Beiträge
60
Kommentatoren
147.6k
Aufrufe
52
Watching
-
NPM war noch outdated:
npm install -g npm@9.8.1danach noch ein reboot und ioBroker hat die aktuelle Version erkannt.
Lass die Finger von einer globalen Installation von 'npm'. Das kommt immer in passender Version beim Paket 'nodejs' mit.
-
@chu
Klingt komisch.
Erstens sollte npm nur mit node zusammen aktualisisert werden (wenn nicht besondere Gründe existieren) und zwitens hängt npm nicht mit der Erkennung der Node version zusammen ...Schätze eher dass der Reboot gehoöfen hat.
Ansonsten - wenns jetzt geht solls recht sein ...
@mcm57 sagte in Troubleshooting NodeJS update:
Schätze eher dass der Reboot gehoöfen hat.
Ja.
Den iobroker stoppt man ja auch eigentlich, bevor man da die Laufzeitumgebung anpackt. Hier ist das augenscheinlich nicht passiert, sonst würde keine Uptime von 14 Tagen angezeigt.Wäre der 2 Punkt aus der Anleitung gewesen...
-
@mcm57 sagte in Troubleshooting NodeJS update:
Schätze eher dass der Reboot gehoöfen hat.
Ja.
Den iobroker stoppt man ja auch eigentlich, bevor man da die Laufzeitumgebung anpackt. Hier ist das augenscheinlich nicht passiert, sonst würde keine Uptime von 14 Tagen angezeigt.Wäre der 2 Punkt aus der Anleitung gewesen...
@thomas-braun
OK - hab ich nicht gesehen.
Wundert mich, dass er sich nicht selbst "gestoppt" hat (= gecrashed ist). -
@mcm57 sagte in Troubleshooting NodeJS update:
Schätze eher dass der Reboot gehoöfen hat.
Ja.
Den iobroker stoppt man ja auch eigentlich, bevor man da die Laufzeitumgebung anpackt. Hier ist das augenscheinlich nicht passiert, sonst würde keine Uptime von 14 Tagen angezeigt.Wäre der 2 Punkt aus der Anleitung gewesen...
hab die Anleitung befolgt, nur der ioBroker hat es nicht erkannt. alles commands von heute:
894 apt-get update 895 apt-get upgrade 896 reboot 897 iob stop 898 sudo apt purge --autoremove nodejs* npm node-* 899 curl -fsSL https://deb.nodesource.com/setup_18.x | sudo -E bash - 900 sudo apt install -y nodejs 901 sudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null 902 type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx -v 903 iob fix 904 iob start 905 apt-get update 906 apt-get dist-upgrade 907 reboot 908 sudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null 909 type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx -v 910 env 911 npm i iobroker.sma-em 912 npm install -g npm@9.8.1 913 reboot 914 apt-get update 915 historyIch hatte bereits (mehrfach, 896 907) neu gestartet, aber nicht gesehen das der ioBroker das nicht erkannt hat und erst nach nach dem update und anschließendem reboot die neue version erkannt hat. solange jetzt alles funktioniert werde ich es erstmal so lassen :D
-
hab die Anleitung befolgt, nur der ioBroker hat es nicht erkannt. alles commands von heute:
894 apt-get update 895 apt-get upgrade 896 reboot 897 iob stop 898 sudo apt purge --autoremove nodejs* npm node-* 899 curl -fsSL https://deb.nodesource.com/setup_18.x | sudo -E bash - 900 sudo apt install -y nodejs 901 sudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null 902 type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx -v 903 iob fix 904 iob start 905 apt-get update 906 apt-get dist-upgrade 907 reboot 908 sudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null 909 type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx -v 910 env 911 npm i iobroker.sma-em 912 npm install -g npm@9.8.1 913 reboot 914 apt-get update 915 historyIch hatte bereits (mehrfach, 896 907) neu gestartet, aber nicht gesehen das der ioBroker das nicht erkannt hat und erst nach nach dem update und anschließendem reboot die neue version erkannt hat. solange jetzt alles funktioniert werde ich es erstmal so lassen :D
iob stop sudo apt update sudo apt install --reinstall nodejs iob startsetzt dich da wieder auf das richtige Gleis.
-
Hi, ich habe nodejs & Co. gemäß der Anleitung https://forum.iobroker.net/topic/64032/update-nodejs-best-practise-supported-16-und-18 aktualisiert und bin jetzt auf den folgenden Versionen unterwegs:
/usr/bin/nodejs /usr/bin/node /usr/bin/npm /usr/bin/npx v18.17.1 v18.17.1 9.6.7 9.6.7Nun habe ich ein Update auf die aktuellste Version des Admin-Adapters gemacht und bekomme im Log die Meldung:
2023-08-27 12:50:21.214 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: node:internal/modules/cjs/loader:1080 2023-08-27 12:50:21.214 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: throw err; 2023-08-27 12:50:21.214 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: ^ 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Error: Cannot find module '@iobroker/types' 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Require stack: 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core/build/index.js 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.admin/main.js 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) 2023-08-27 12:50:21.216 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:922:27) 2023-08-27 12:50:21.216 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) 2023-08-27 12:50:21.216 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at require (node:internal/modules/cjs/helpers:121:18) 2023-08-27 12:50:21.217 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapte$ 2023-08-27 12:50:21.217 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1256:14) 2023-08-27 12:50:21.217 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32) 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:960:12) 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) { 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: requireStack: [ 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core/build/index.js', 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.admin/main.js' 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: ] 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: } 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Node.js v18.17.1auch ein Reboot hat leider keine Verbesserung gebracht.
Habt Ihr eine Idee, woran es liegen könnte?
Viele Grüße im Voraus
Matthias -
Hi, ich habe nodejs & Co. gemäß der Anleitung https://forum.iobroker.net/topic/64032/update-nodejs-best-practise-supported-16-und-18 aktualisiert und bin jetzt auf den folgenden Versionen unterwegs:
/usr/bin/nodejs /usr/bin/node /usr/bin/npm /usr/bin/npx v18.17.1 v18.17.1 9.6.7 9.6.7Nun habe ich ein Update auf die aktuellste Version des Admin-Adapters gemacht und bekomme im Log die Meldung:
2023-08-27 12:50:21.214 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: node:internal/modules/cjs/loader:1080 2023-08-27 12:50:21.214 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: throw err; 2023-08-27 12:50:21.214 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: ^ 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Error: Cannot find module '@iobroker/types' 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Require stack: 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core/build/index.js 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.admin/main.js 2023-08-27 12:50:21.215 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) 2023-08-27 12:50:21.216 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:922:27) 2023-08-27 12:50:21.216 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) 2023-08-27 12:50:21.216 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at require (node:internal/modules/cjs/helpers:121:18) 2023-08-27 12:50:21.217 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapte$ 2023-08-27 12:50:21.217 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1256:14) 2023-08-27 12:50:21.217 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32) 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:960:12) 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) { 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2023-08-27 12:50:21.218 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: requireStack: [ 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core/build/index.js', 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.admin/main.js' 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: ] 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: } 2023-08-27 12:50:21.219 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Node.js v18.17.1auch ein Reboot hat leider keine Verbesserung gebracht.
Habt Ihr eine Idee, woran es liegen könnte?
Viele Grüße im Voraus
Matthias@matthiaspetersen sagte in Troubleshooting NodeJS update:
aktualisiert und bin jetzt auf den folgenden Versionen unterwegs:
sicher?
-
@matthiaspetersen sagte in Troubleshooting NodeJS update:
aktualisiert und bin jetzt auf den folgenden Versionen unterwegs:
sicher?
@crunchip
Wenn Du so fragst ... ich hoffe, dass ich auf den Versionen unterwegs bin. Die Daten kommen gemäß der Anleitung, wenn ich die Befehlesudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null
type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx -vabsetze. Dass ich auf nodejs 18.17.1 bin steht auch beim Log am Ende der Fehlermeldung.
-
@crunchip
Wenn Du so fragst ... ich hoffe, dass ich auf den Versionen unterwegs bin. Die Daten kommen gemäß der Anleitung, wenn ich die Befehlesudo ln -s /usr/bin/node /usr/bin/nodejs &> /dev/null
type -P nodejs node npm npx && nodejs -v && node -v && npm -v && npx -vabsetze. Dass ich auf nodejs 18.17.1 bin steht auch beim Log am Ende der Fehlermeldung.
@matthiaspetersen und iobroker war vorher auch gestoppt?
Augabe voniob diag -
@matthiaspetersen und iobroker war vorher auch gestoppt?
Augabe voniob diag@crunchip Den iobroker hatte ich vorher per iob stop gestoppt.
iob diag sieht bei mir wie folgt aus:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 10 (buster) Kernel: 5.10.103-v7l+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 4 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 1.2G 1.8G 8.0M 826M 2.5G Swap: 99M 0B 99M Total: 3.9G 1.2G 1.9G Active iob-Instances: 28 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: redis Status admin and web instance: system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 9681 States: 10090 Size of iob-Database: 13M /opt/iobroker/iobroker-data/objects.jsonl 7.9M /opt/iobroker/iobroker-data/objects.json.migrated 7.9M /opt/iobroker/iobroker-data/objects.json.bak.migrated 0 /opt/iobroker/iobroker-data/objects.json.broken 144K /opt/iobroker/iobroker-data/states.json.bak 144K /opt/iobroker/iobroker-data/states.json =================== END OF SUMMARY ====================Hilft Dir das Summary oder soll ich lieber den ganzen Report mal schicken?
-
@crunchip Den iobroker hatte ich vorher per iob stop gestoppt.
iob diag sieht bei mir wie folgt aus:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 10 (buster) Kernel: 5.10.103-v7l+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 4 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 1.2G 1.8G 8.0M 826M 2.5G Swap: 99M 0B 99M Total: 3.9G 1.2G 1.9G Active iob-Instances: 28 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: redis Status admin and web instance: system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 9681 States: 10090 Size of iob-Database: 13M /opt/iobroker/iobroker-data/objects.jsonl 7.9M /opt/iobroker/iobroker-data/objects.json.migrated 7.9M /opt/iobroker/iobroker-data/objects.json.bak.migrated 0 /opt/iobroker/iobroker-data/objects.json.broken 144K /opt/iobroker/iobroker-data/states.json.bak 144K /opt/iobroker/iobroker-data/states.json =================== END OF SUMMARY ====================Hilft Dir das Summary oder soll ich lieber den ganzen Report mal schicken?
@matthiaspetersen sagte in Troubleshooting NodeJS update:
10 (buster)
du fährst ein altes System
https://forum.iobroker.net/post/667685 -
@matthiaspetersen sagte in Troubleshooting NodeJS update:
10 (buster)
du fährst ein altes System
https://forum.iobroker.net/post/667685@crunchip said in Troubleshooting NodeJS update:
@crunchip Ah, danke für den Hinweis. Ich hatte die ganze Zeit ein Problem mit nodejs & Co. vermutet. Ich mache mal dann mal das Update auf Bullseye und führe ich die Schritte von https://forum.iobroker.net/topic/64032/update-nodejs-best-practise-supported-16-und-18 nochmal durch.
Danke Dir
-
@crunchip said in Troubleshooting NodeJS update:
@crunchip Ah, danke für den Hinweis. Ich hatte die ganze Zeit ein Problem mit nodejs & Co. vermutet. Ich mache mal dann mal das Update auf Bullseye und führe ich die Schritte von https://forum.iobroker.net/topic/64032/update-nodejs-best-practise-supported-16-und-18 nochmal durch.
Danke Dir
@matthiaspetersen
Ich bin jetzt auf bullseye und habe die Installation von nodejs & Co. nochmal gemacht. Der Fehler ist aber leider der Gleiche.Hier ist das Ergebnis von iob diag:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Kernel: 5.10.103-v7l+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 4 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 193M 2.4G 0.0K 1.2G 3.5G Swap: 99M 0B 99M Total: 3.9G 193M 2.5G Active iob-Instances: 1 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is not running on this host. Objects type: jsonl States type: redis Status admin and web instance: system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 9683 States: 10056 Size of iob-Database: 11M /opt/iobroker/iobroker-data/objects.jsonl 7.9M /opt/iobroker/iobroker-data/objects.json.migrated 7.9M /opt/iobroker/iobroker-data/objects.json.bak.migrated 0 /opt/iobroker/iobroker-data/objects.json.broken 144K /opt/iobroker/iobroker-data/states.json.bak 144K /opt/iobroker/iobroker-data/states.json =================== END OF SUMMARY ==================== -
@matthiaspetersen
Ich bin jetzt auf bullseye und habe die Installation von nodejs & Co. nochmal gemacht. Der Fehler ist aber leider der Gleiche.Hier ist das Ergebnis von iob diag:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Kernel: 5.10.103-v7l+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 4 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 193M 2.4G 0.0K 1.2G 3.5G Swap: 99M 0B 99M Total: 3.9G 193M 2.5G Active iob-Instances: 1 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.8.0 ioBroker Status: iobroker is not running on this host. Objects type: jsonl States type: redis Status admin and web instance: system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 9683 States: 10056 Size of iob-Database: 11M /opt/iobroker/iobroker-data/objects.jsonl 7.9M /opt/iobroker/iobroker-data/objects.json.migrated 7.9M /opt/iobroker/iobroker-data/objects.json.bak.migrated 0 /opt/iobroker/iobroker-data/objects.json.broken 144K /opt/iobroker/iobroker-data/states.json.bak 144K /opt/iobroker/iobroker-data/states.json =================== END OF SUMMARY ====================@matthiaspetersen sagte in Troubleshooting NodeJS update:
Der Fehler ist aber leider der Gleiche.
welcher?
-
@matthiaspetersen sagte in Troubleshooting NodeJS update:
Der Fehler ist aber leider der Gleiche.
welcher?
@crunchip Hier ist die erste Meldung aus dem Log (taucht insgesamt ja 3x auf, weil 3x ein rebuild versucht wird:
2023-08-27 15:02:30.658 - ^[[32minfo^[[39m: host.iobroker instance system.adapter.ping.0 started with pid 10838 2023-08-27 15:02:31.138 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: node:internal/modules/cjs/loader:1080 2023-08-27 15:02:31.139 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: throw err; 2023-08-27 15:02:31.140 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: ^ 2023-08-27 15:02:31.140 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Error: Cannot find module '@iobroker/types' 2023-08-27 15:02:31.141 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Require stack: 2023-08-27 15:02:31.141 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core/build/> 2023-08-27 15:02:31.142 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.admin/main.js 2023-08-27 15:02:31.142 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) 2023-08-27 15:02:31.143 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:922:27) 2023-08-27 15:02:31.143 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) 2023-08-27 15:02:31.144 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at require (node:internal/modules/cjs/helpers:121:18) 2023-08-27 15:02:31.144 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.admin/node_modules/@iob> 2023-08-27 15:02:31.144 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1256:14) 2023-08-27 15:02:31.145 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) 2023-08-27 15:02:31.145 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32) 2023-08-27 15:02:31.146 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:960:12) 2023-08-27 15:02:31.147 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) { 2023-08-27 15:02:31.147 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2023-08-27 15:02:31.148 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: requireStack: [ 2023-08-27 15:02:31.148 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core/bui> 2023-08-27 15:02:31.149 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.admin/main.js' 2023-08-27 15:02:31.149 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: ] 2023-08-27 15:02:31.150 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: } 2023-08-27 15:02:31.150 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Node.js v18.17.1 2023-08-27 15:02:31.151 - ^[[31merror^[[39m: host.iobroker instance system.adapter.admin.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2023-08-27 15:02:31.151 - ^[[32minfo^[[39m: host.iobroker Adapter system.adapter.admin.0 needs rebuild and will be restarted afterwards. 2023-08-27 15:02:31.152 - ^[[32minfo^[[39m: host.iobroker system.adapter.admin.0 will be rebuilt 2023-08-27 15:02:31.153 - ^[[33mwarn^[[39m: host.iobroker adapter "admin" seems to be installed for a different version of Node.js. Trying to rebuild it... 2 attempt 2023-08-27 15:02:31.154 - ^[[32minfo^[[39m: host.iobroker iobroker rebuild -
@crunchip Hier ist die erste Meldung aus dem Log (taucht insgesamt ja 3x auf, weil 3x ein rebuild versucht wird:
2023-08-27 15:02:30.658 - ^[[32minfo^[[39m: host.iobroker instance system.adapter.ping.0 started with pid 10838 2023-08-27 15:02:31.138 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: node:internal/modules/cjs/loader:1080 2023-08-27 15:02:31.139 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: throw err; 2023-08-27 15:02:31.140 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: ^ 2023-08-27 15:02:31.140 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Error: Cannot find module '@iobroker/types' 2023-08-27 15:02:31.141 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Require stack: 2023-08-27 15:02:31.141 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core/build/> 2023-08-27 15:02:31.142 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.admin/main.js 2023-08-27 15:02:31.142 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15) 2023-08-27 15:02:31.143 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:922:27) 2023-08-27 15:02:31.143 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) 2023-08-27 15:02:31.144 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at require (node:internal/modules/cjs/helpers:121:18) 2023-08-27 15:02:31.144 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.admin/node_modules/@iob> 2023-08-27 15:02:31.144 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1256:14) 2023-08-27 15:02:31.145 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._extensions..js (node:internal/modules/cjs/loader:1310:10) 2023-08-27 15:02:31.145 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1119:32) 2023-08-27 15:02:31.146 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module._load (node:internal/modules/cjs/loader:960:12) 2023-08-27 15:02:31.147 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1143:19) { 2023-08-27 15:02:31.147 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2023-08-27 15:02:31.148 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: requireStack: [ 2023-08-27 15:02:31.148 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core/bui> 2023-08-27 15:02:31.149 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.admin/main.js' 2023-08-27 15:02:31.149 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: ] 2023-08-27 15:02:31.150 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: } 2023-08-27 15:02:31.150 - ^[[31merror^[[39m: host.iobroker Caught by controller[0]: Node.js v18.17.1 2023-08-27 15:02:31.151 - ^[[31merror^[[39m: host.iobroker instance system.adapter.admin.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2023-08-27 15:02:31.151 - ^[[32minfo^[[39m: host.iobroker Adapter system.adapter.admin.0 needs rebuild and will be restarted afterwards. 2023-08-27 15:02:31.152 - ^[[32minfo^[[39m: host.iobroker system.adapter.admin.0 will be rebuilt 2023-08-27 15:02:31.153 - ^[[33mwarn^[[39m: host.iobroker adapter "admin" seems to be installed for a different version of Node.js. Trying to rebuild it... 2 attempt 2023-08-27 15:02:31.154 - ^[[32minfo^[[39m: host.iobroker iobroker rebuildDeinstallier den admin und reinstallier den frisch.
-
@thomas-braun Wenn ich den Admin-Adapter per
iob del adminlösche, dann bekomme ich ihn nicht weg, weil da diverse andere Adapter (backitup, history, ical etc.) abhängig sind. Meinst Du ein iob del admin?
-
@thomas-braun Wenn ich den Admin-Adapter per
iob del adminlösche, dann bekomme ich ihn nicht weg, weil da diverse andere Adapter (backitup, history, ical etc.) abhängig sind. Meinst Du ein iob del admin?
@matthiaspetersen probier es mit
iobroker rebuild admin --install -
@matthiaspetersen probier es mit
iobroker rebuild admin --install@crunchip @Thomas-Braun Vielen lieben Dank für Eure Unterstützung und Eure schnellen Antworten. Das
iobroker rebuild admin --installhat geholfen.
-
Hallo zusammen.
Ich hab heute mein Debian Stretch auf Debian Buster (10) upgedatet und natürlich direkt auch nodejs auch direkt auf Version 18.
Das habe ich bei meinem Master-System im Dockercontainer gemacht, sowie auf einem Raspbian Slave System.
Auf dem Raspbian scheint alles gut verlaufen zu sein.
Auf dem Master läuft auch ioBroker, jedoch kann ich keine Module updaten.
Im Admin kommt beim ersten Updateversuch folgende Meldung:
iobroker upgrade heatingcontrol@2.11.1 --debug Update heatingcontrol from @2.10.6 to @2.11.1 host.iobroker Adapter "system.adapter.heatingcontrol.0" is stopped. NPM version: 9.6.7 Installing iobroker.heatingcontrol@2.11.1... (System call) npm WARN skipping integrity check for git dependency ssh://git@github.com/noopkat/browser-serialport.git npm WARN deprecated nomnom@1.8.1: Package no longer supported. Contact support@npmjs.com for more info. npm WARN deprecated jscs-preset-wikimedia@1.0.1: No longer maintained. We recomment migrating to ESLint with eslint-config-wikimedia. npm WARN deprecated topo@3.0.3: This module has moved and is now available at @hapi/topo. Please update your dependencies as this version is no longer maintained an may contain bugs and security issues. npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142 npm WARN deprecated request-promise-native@1.0.9: request-promise-native has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142 npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained. npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm WARN deprecated json3@3.3.2: Please use the native JSON object instead of JSON 3 npm WARN deprecated jscs@3.0.7: JSCS has merged with ESLint! See - https://medium.com/@markelog/jscs-end-of-the-line-bc9bf0b3fdb2 npm WARN deprecated joi@14.3.1: This module has moved and is now available at @hapi/joi. Please update your dependencies as this version is no longer maintained an may contain bugs and security issues. npm WARN deprecated hoek@6.1.3: This module has moved and is now available at @hapi/hoek. Please update your dependencies as this version is no longer maintained an may contain bugs and security issues. npm WARN deprecated har-validator@5.1.5: this library is no longer supported npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies. npm WARN deprecated circular-json@0.5.9: CircularJSON is in maintenance only, flatted is its successor. npm WARN deprecated babel@6.23.0: In 6.x, the babel package has been deprecated in favor of babel-cli. Check https://opencollective.com/babel to support the Babel maintainers npm WARN deprecated appdirectory@0.1.0: Package no longer supported. Contact Support at https://www.npmjs.com/support for more info. npm WARN deprecated uuid@2.0.3: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details. npm WARN deprecated uuid@3.4.0: Please upgrade to version 7 or higher. Older versions may use Math.random() in certain circumstances, which is known to be problematic. See https://v8.dev/blog/math-random for details. npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797) npm WARN deprecated core-js@2.6.12: core-js@<3.23.3 is no longer maintained and not recommended for usage due to the number of issues. Because of the V8 engine whims, feature detection in old core-js versions could cause a slowdown up to 100x even if nothing is polyfilled. Some versions have web compatibility issues. Please, upgrade your dependencies to the actual version of core-js. npm WARN cleanup Failed to remove some directories [ npm WARN cleanup syscall: 'rmdir', npm WARN cleanup path: '/opt/iobroker/node_modules/cpu-features'npm WARN cleanup }npm WARN cleanup ],npm WARN cleanup [npm WARN cleanup '/opt/iobroker/node_modules/cpu-features',npm WARN cleanup [Error: ENOTEMPTY: directory not empty, rmdir '/opt/iobroker/node_modules/cpu-features'] {npm WARN cleanup errno: -39,npm WARN cleanup code: 'ENOTEMPTY',npm WARN cleanup syscall: 'rmdir',npm WARN cleanup path: '/opt/iobroker/node_modules/cpu-features'npm WARN cleanup }npm WARN cleanup ]npm WARN cleanup ] npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/@serialport/bindings npm ERR! command failednpm ERR! command sh -c prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuildnpm ERR! make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird betretennpm ERR! CXX(target) Release/obj.target/bindings/src/serialport.onpm ERR! make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird verlassennpm ERR! gyp info it worked if it ends with oknpm ERR! gyp info using node-gyp@9.3.1npm ERR! gyp info using node@18.17.1 | linux | x64npm ERR! gyp info find Python using Python version 3.7.3 found at "/usr/bin/python3"npm ERR! gyp info spawn /usr/bin/python3npm ERR! gyp info spawn args [npm ERR! gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm ERR! gyp info spawn args 'binding.gyp',npm ERR! gyp info spawn args '-f',npm ERR! gyp info spawn args 'make',npm ERR! gyp info spawn args '-I',npm ERR! gyp info spawn args '/opt/iobroker/node_modules/@serialport/bindings/build/config.gypi',npm ERR! gyp info spawn args '-I',npm ERR! gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm ERR! gyp info spawn args '-I',npm ERR! gyp info spawn args '/home/iobroker/.cache/node-gyp/18.17.1/include/node/common.gypi',npm ERR! gyp info spawn args '-Dlibrary=shared_library',npm ERR! gyp info spawn args '-Dvisibility=default',npm ERR! gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/18.17.1',npm ERR! gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm ERR! gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/18.17.1/<(target_arch)/node.lib',npm ERR! gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/@serialport/bindings',npm ERR! gyp info spawn args '-Dnode_engine=v8',npm ERR! gyp info spawn args '--depth=.',npm ERR! gyp info spawn args '--no-parallel',npm ERR! gyp info spawn args '--generator-output',npm ERR! gyp info spawn args 'build',npm ERR! gyp info spawn args '-Goutput_dir=.'npm ERR! gyp info spawn args ]npm ERR! gyp info spawn makenpm ERR! gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:npm ERR! ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]npm ERR! uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);npm ERR! ^~~~~~~~~~~~~npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:npm ERR! ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]npm ERR! uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);npm ERR! ^~~~~~~~~~~~~~~npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:npm ERR! ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]npm ERR! uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);npm ERR! ^~~~~~~~~~~~~~npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:npm ERR! ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]npm ERR! uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);npm ERR! ^~~~~~~~~~~~~~npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:npm ERR! ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]npm ERR! uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);npm ERR! ^~~~~~~~~~~~npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:npm ERR! ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]npm ERR! uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);npm ERR! ^~~~~~~~~~~~npm ERR! ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’:npm ERR! ../src/serialport.cpp:329:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’npm ERR! results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts));npm ERR! ^npm ERR! In file included from /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-array-buffer.h:13,npm ERR! from /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8.h:24,npm ERR! from /home/iobroker/.cache/node-gyp/18.17.1/include/node/node.h:73,npm ERR! from ../../../nan/nan.h:60,npm ERR! from ../src/./serialport.h:6,npm ERR! from ../src/serialport.cpp:1:npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:244:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’npm ERR! V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,npm ERR! ^~~npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:244:37: note: candidate expects 3 arguments, 2 providednpm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:247:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’npm ERR! V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,npm ERR! ^~~npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:247:37: note: candidate expects 3 arguments, 2 providednpm ERR! ../src/serialport.cpp:330:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’npm ERR! results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr));npm ERR! ^npm ERR! In file included from /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-array-buffer.h:13,npm ERR! from /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8.h:24,npm ERR! from /home/iobroker/.cache/node-gyp/18.17.1/include/node/node.h:73,npm ERR! from ../../../nan/nan.h:60,npm ERR! from ../src/./serialport.h:6,npm ERR! from ../src/serialport.cpp:1:npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:244:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’npm ERR! V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,npm ERR! ^~~npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:244:37: note: candidate expects 3 arguments, 2 providednpm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:247:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’npm ERR! V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,npm ERR! ^~~npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:247:37: note: candidate expects 3 arguments, 2 providednpm ERR! ../src/serialport.cpp:331:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’npm ERR! results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd));npm ERR! ^npm ERR! In file included from /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-array-buffer.h:13,npm ERR! from /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8.h:24,npm ERR! from /home/iobroker/.cache/node-gyp/18.17.1/include/node/node.h:73,npm ERR! from ../../../nan/nan.h:60,npm ERR! from ../src/./serialport.h:6,npm ERR! from ../src/serialport.cpp:1:npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:244:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’npm ERR! V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,npm ERR! ^~~npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:244:37: note: candidate expects 3 arguments, 2 providednpm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:247:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’npm ERR! V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,npm ERR! ^~~npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:247:37: note: candidate expects 3 arguments, 2 providednpm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:npm ERR! ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]npm ERR! uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);npm ERR! ^~~~~~~~~~~~~~~~~~~~npm ERR! ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’: npm ERR! ../src/serialport.cpp:378:106: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::IntegerFactory<v8::Integer>::return_t)’ npm ERR! results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate));npm ERR! ^npm ERR! In file included from /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-array-buffer.h:13,npm ERR! from /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8.h:24,npm ERR! from /home/iobroker/.cache/node-gyp/18.17.1/include/node/node.h:73,npm ERR! from ../../../nan/nan.h:60,npm ERR! from ../src/./serialport.h:6,npm ERR! from ../src/serialport.cpp:1: npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:244:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’npm ERR! V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,npm ERR! ^~~npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:244:37: note: candidate expects 3 arguments, 2 providednpm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:247:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’npm ERR! V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,npm ERR! ^~~npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/v8-object.h:247:37: note: candidate expects 3 arguments, 2 providednpm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:npm ERR! ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]npm ERR! uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); npm ERR! ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]npm ERR! SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {npm ERR! ^npm ERR! In file included from ../../../nan/nan.h:60,npm ERR! from ../src/./serialport.h:6,npm ERR! from ../src/serialport.cpp:1:npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/node.h:1014:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm ERR! (node::addon_register_func) (regfunc), \npm ERR! ^npm ERR! /home/iobroker/.cache/node-gyp/18.17.1/include/node/node.h:1048:3: note: in expansion of macro ‘NODE_MODULE_X’npm ERR! NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm ERR! ^~~~~~~~~~~~~npm ERR! ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’npm ERR! NODE_MODULE(serialport, init);npm ERR! ^~~~~~~~~~~npm ERR! make: *** [bindings.target.mk:116: Release/obj.target/bindings/src/serialport.o] Fehler 1npm ERR! gyp ERR! build error npm ERR! gyp ERR! stack Error: `make` failed with exit code: 2npm ERR! gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:203:23)npm ERR! gyp ERR! stack at ChildProcess.emit (node:events:514:28)npm ERR! gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:291:12)npm ERR! gyp ERR! System Linux 5.15.108-1-pvenpm ERR! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/@serialport/bindingsnpm ERR! gyp ERR! node -v v18.17.1npm ERR! gyp ERR! node-gyp -v v9.3.1npm ERR! gyp ERR! not ok npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-08-31T13_02_01_266Z-debug-0.log Update "system.adapter.heatingcontrol.0" upload [4] heatingcontrol.admin /opt/iobroker/node_modules/iobroker.heatingcontrol/admin/heatingcontrol.png heatingcontrol.png image/png upload [3] heatingcontrol.admin /opt/iobroker/node_modules/iobroker.heatingcontrol/admin/img/info-big.png img/info-big.png image/png upload [2] heatingcontrol.admin /opt/iobroker/node_modules/iobroker.heatingcontrol/admin/index_m.html index_m.html text/html upload [1] heatingcontrol.admin /opt/iobroker/node_modules/iobroker.heatingcontrol/admin/style.css style.css text/css upload [0] heatingcontrol.admin /opt/iobroker/node_modules/iobroker.heatingcontrol/admin/words.js words.js application/javascript host.iobroker Adapter "system.adapter.heatingcontrol.0" is started Process exited with code 0Bei Updateversuchen weiterer Module ist die Ausgabe dann kürzer:
$ iobroker upgrade ping@1.6.2 --debug Update ping from @1.5.3 to @1.6.2 NPM version: 9.6.7 Installing iobroker.ping@1.6.2... (System call) npm ERR! code ENOTEMPTYnpm ERR! syscall renamenpm ERR! path /opt/iobroker/node_modules/cpu-featuresnpm ERR! dest /opt/iobroker/node_modules/.cpu-features-JirOBYx7npm ERR! errno -39 npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-08-31T13_16_17_169Z-debug-0.log host.iobroker Cannot install iobroker.ping@1.6.2: 217 ERROR: Process exited with code 25Installiert ist mein System wie folgt:
======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Debian GNU/Linux 10 (buster) Kernel: 5.15.108-1-pve Installation: lxc Failed to query server: Connection timed out Timezone: User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 12 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.1G 2.5G 775M 8.0M 778M 1.6G Swap: 4.1G 0.0K 4.1G Total: 8.2G 2.5G 4.9G Active iob-Instances: 43 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.admin.1 : admin : iobroker2 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 14436 States: 12673 Size of iob-Database: 14M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/objects.json.migrated 14M /opt/iobroker/iobroker-data/objects.json.bak.migrated 14M /opt/iobroker/iobroker-data/states.jsonl 2.4M /opt/iobroker/iobroker-data/states.json.migrated 2.4M /opt/iobroker/iobroker-data/states.json.bak.migrated ********************************************************************* Some problems detected, please run iob fix and try to have them fixed ********************************************************************* =================== END OF SUMMARY ====================iob fix habe ich natürlich schon oft ausprobiert.
Support us
808
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge