Test für mihome-vacuum 3.10.x

blackeagle998

@dirkhe
Hallo, ich habe das jetzt nochmal ausgiebig getestet.
Testfall 1: Raum1 repeat = 2, Raum2 repeat = 1, Ergebnis N.I.O (beide Räume werden nur einmal gesaugt)
Testfall 2: Raum1 repeat = 2, Raum2 repeat = 2, Ergebnis I.O
Testfall 3: Raum1 repeat = 1, Raum2 repeat = 2, Ergebnis I.O
Testfall 4: Raum1 repeat = 3, Raum2 repeat = 2, Ergebnis I.O

Entsprechend der Testfälle scheint es nur das Problem zu geben, wenn der zuletzt getriggerte Raum die repeat Angabe 1 hat. Dann wird dies anscheinend für die Räume davor überschrieben.
Mit mehr als zwei Räumen habe ich noch nicht getestet, sobald ich da noch N.I.O. Fälle habe, melde ich diese.

Anbei das DEBUG Log zu den einzelnen Testfällen:

2/1 = N.I.O.
2023-02-20 09:32:37.417  - debug: mihome-vacuum.0 (92015) command: repeat parent: room16
2023-02-20 09:32:38.908  - debug: mihome-vacuum.0 (92015) command: roomClean parent: room16
2023-02-20 09:32:38.910  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":{"segments":[16],"channels":["mihome-vacuum.0.rooms.room16"]},"from":"system.adapter.mihome-vacuum.0","_id":96480001}
2023-02-20 09:32:38.910  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"16","from":"system.adapter.mihome-vacuum.0","_id":96480001,"segments":[16],"channels":["mihome-vacuum.0.rooms.room16"]}
2023-02-20 09:32:38.914  - info: mihome-vacuum.0 (92015) trigger cleaning segment 16
2023-02-20 09:32:38.914  - debug: mihome-vacuum.0 (92015) Message= {"id":8988,"method":"app_segment_clean","params":[{"segments":[16],"repeat":"2"}]}
2023-02-20 09:33:38.049  - debug: mihome-vacuum.0 (92015) command: roomClean parent: room20
2023-02-20 09:33:38.051  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":{"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"]},"from":"system.adapter.mihome-vacuum.0","_id":96480002}
2023-02-20 09:33:38.051  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480002,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"]}
2023-02-20 09:33:38.051  - info: mihome-vacuum.0 (92015) should trigger cleaning segment 20, but is currently active(18). Add to queue
2023-02-20 09:37:36.628  - debug: mihome-vacuum.0 (92015) use clean trigger from Queue
2023-02-20 09:37:36.628  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480002,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"],"info":"segment  Flur Garderobe"}
2023-02-20 09:37:36.628  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480002,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"],"info":"segment  Flur Garderobe"}
2023-02-20 09:37:36.633  - info: mihome-vacuum.0 (92015) trigger cleaning segment 20
2023-02-20 09:37:36.633  - debug: mihome-vacuum.0 (92015) Message= {"id":9060,"method":"app_segment_clean","params":[20]}

2/2 = I.O.
2023-02-20 09:50:54.564  - debug: mihome-vacuum.0 (92015) command: repeat parent: room16
2023-02-20 09:50:57.298  - debug: mihome-vacuum.0 (92015) command: roomClean parent: room16
2023-02-20 09:50:57.301  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":{"segments":[16],"channels":["mihome-vacuum.0.rooms.room16"]},"from":"system.adapter.mihome-vacuum.0","_id":96480003}
2023-02-20 09:50:57.301  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"16","from":"system.adapter.mihome-vacuum.0","_id":96480003,"segments":[16],"channels":["mihome-vacuum.0.rooms.room16"]}
2023-02-20 09:50:57.301  - info: mihome-vacuum.0 (92015) trigger cleaning segment 16
2023-02-20 09:50:57.301  - debug: mihome-vacuum.0 (92015) Message= {"id":9272,"method":"app_segment_clean","params":[{"segments":[16],"repeat":2}]}
2023-02-20 09:51:19.116  - debug: mihome-vacuum.0 (92015) command: repeat parent: room20
2023-02-20 09:51:20.039  - debug: mihome-vacuum.0 (92015) command: roomClean parent: room20
2023-02-20 09:51:20.042  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":{"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"]},"from":"system.adapter.mihome-vacuum.0","_id":96480004}
2023-02-20 09:51:20.042  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480004,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"]}
2023-02-20 09:51:20.042  - info: mihome-vacuum.0 (92015) should trigger cleaning segment 20, but is currently active(18). Add to queue
2023-02-20 09:59:38.898  - debug: mihome-vacuum.0 (92015) use clean trigger from Queue
2023-02-20 09:59:38.898  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480004,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"],"info":"segment  Flur Garderobe"}
2023-02-20 09:59:38.898  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480004,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"],"info":"segment  Flur Garderobe"}
2023-02-20 09:59:38.900  - info: mihome-vacuum.0 (92015) trigger cleaning segment 20
2023-02-20 09:59:38.900  - debug: mihome-vacuum.0 (92015) Message= {"id":9400,"method":"app_segment_clean","params":[{"segments":[20],"repeat":2}]}

1/2 = I.O.
2023-02-20 10:09:48.253  - debug: mihome-vacuum.0 (92015) command: repeat parent: room16
2023-02-20 10:09:49.695  - debug: mihome-vacuum.0 (92015) command: repeat parent: room20
2023-02-20 10:10:18.671  - debug: mihome-vacuum.0 (92015) command: roomClean parent: room16
2023-02-20 10:10:18.674  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":{"segments":[16],"channels":["mihome-vacuum.0.rooms.room16"]},"from":"system.adapter.mihome-vacuum.0","_id":96480007}
2023-02-20 10:10:18.674  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"16","from":"system.adapter.mihome-vacuum.0","_id":96480007,"segments":[16],"channels":["mihome-vacuum.0.rooms.room16"]}
2023-02-20 10:10:18.692  - info: mihome-vacuum.0 (92015) trigger cleaning segment 16
2023-02-20 10:10:18.693  - debug: mihome-vacuum.0 (92015) Message= {"id":9570,"method":"app_segment_clean","params":[16]}
2023-02-20 10:10:29.327  - debug: mihome-vacuum.0 (92015) command: roomClean parent: room20
2023-02-20 10:10:29.329  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":{"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"]},"from":"system.adapter.mihome-vacuum.0","_id":96480008}
2023-02-20 10:10:29.329  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480008,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"]}
2023-02-20 10:10:29.329  - info: mihome-vacuum.0 (92015) should trigger cleaning segment 20, but is currently active(18). Add to queue
2023-02-20 10:14:29.288  - debug: mihome-vacuum.0 (92015) use clean trigger from Queue
2023-02-20 10:14:29.288  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480008,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"],"info":"segment  Flur Garderobe"}
2023-02-20 10:14:29.288  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480008,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"],"info":"segment  Flur Garderobe"}
2023-02-20 10:14:29.288  - debug: mihome-vacuum.0 (92015) Message= {"id":9628,"method":"get_network_info"}
2023-02-20 10:14:29.289  - info: mihome-vacuum.0 (92015) trigger cleaning segment 20
2023-02-20 10:14:29.289  - debug: mihome-vacuum.0 (92015) Message= {"id":9629,"method":"app_segment_clean","params":[{"segments":[20],"repeat":2}]}

3/2 = I.O.
2023-02-20 10:16:18.774  - debug: mihome-vacuum.0 (92015) command: repeat parent: room16
2023-02-20 10:16:48.128  - debug: mihome-vacuum.0 (92015) command: roomClean parent: room16
2023-02-20 10:16:48.398  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":"16","from":"system.adapter.mihome-vacuum.0","_id":96480011,"segments":[16],"channels":["mihome-vacuum.0.rooms.room16"],"info":"segment  Bad Kinder"}
2023-02-20 10:16:48.398  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"16","from":"system.adapter.mihome-vacuum.0","_id":96480011,"segments":[16],"channels":["mihome-vacuum.0.rooms.room16"],"info":"segment  Bad Kinder"}
2023-02-20 10:16:48.400  - info: mihome-vacuum.0 (92015) trigger cleaning segment 16
2023-02-20 10:16:48.402  - debug: mihome-vacuum.0 (92015) Message= {"id":9664,"method":"app_segment_clean","params":[{"segments":[16],"repeat":3}]}
2023-02-20 10:17:12.323  - debug: mihome-vacuum.0 (92015) command: roomClean parent: room20
2023-02-20 10:17:12.325  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":{"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"]},"from":"system.adapter.mihome-vacuum.0","_id":96480012}
2023-02-20 10:17:12.325  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480012,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"]}
2023-02-20 10:17:12.326  - info: mihome-vacuum.0 (92015) should trigger cleaning segment 20, but is currently active(18). Add to queue
2023-02-20 10:28:53.279  - debug: mihome-vacuum.0 (92015) use clean trigger from Queue
2023-02-20 10:28:53.279  - debug: mihome-vacuum.0 (92015) We are in onMessage:{"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480012,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"],"info":"segment  Flur Garderobe"}
2023-02-20 10:28:53.279  - debug: mihome-vacuum.0 (92015) start Cleaning: 18 MObj: {"command":"cleanSegments","message":"20","from":"system.adapter.mihome-vacuum.0","_id":96480012,"segments":[20],"channels":["mihome-vacuum.0.rooms.room20"],"info":"segment  Flur Garderobe"}
2023-02-20 10:28:53.279  - debug: mihome-vacuum.0 (92015) Message= {"id":9835,"method":"get_network_info"}
2023-02-20 10:28:53.280  - info: mihome-vacuum.0 (92015) trigger cleaning segment 20
2023-02-20 10:28:53.281  - debug: mihome-vacuum.0 (92015) Message= {"id":9836,"method":"app_segment_clean","params":[{"segments":[20],"repeat":2}]}

Wenn ich noch was liefern kann/soll, bitte kurze Rückmeldung.

dirkhe

@blackeagle998 ist auf jeden fall schon mal super aufbereitet. Danke.
Ich denke für den testfall 1 brauche ich mehr log. Normalerweise holt er sich den nächsten befehl aus der queue, wenn er mit dem saugvorgang fertig ist und zurück zum dock fährt. Die frage ist halt, warum er nur eine runde fährt....

BamBam89

@dirkhe said in Test für mihome-vacuum 3.9.x:

@jb_sullivan du kannst cleanmap.mapURL' nehmen, der lefert dir eine Url auf die Map, die kannst du dann einfach in ein image src packen

Hallo zusammen,

ich muss hier leider auch nochmal das Thema Karte raus kramen.

Vor einiger Zeit hatte ich mal die Karte von meinem S5 eingebunden. Auf dieser konnte ich auch nahezu in Echtzeit verfolgen wo der Sauger gerade steckt.

Wenn ich nach der beschreibung bei Github gehe sollte map64 diesen Status liefern.
Wenn ich das Widget kompiere und bei mir einfüge bekommen ich aber lediglich im basic HTML den Pfad zu der Karte angezeigt. Nicht die Karte an für sich. Wie bereits von JB_Sullivan geschrieben.
Wenn ich die Karte als Bild einstelle wird mir auch nur ein altes Statisches Bild angezeigt.

Mach ich was falsch? Oder kann man keine "Live" Karte mehr anzeigen lassen?

Danke
Gruß Christian

dirkhe

@bambam89 in map64 sind quasi die binär daten als text gespeichert, in mapUrl eine url zu einer karte, die im dateisystem gespeichert wird und per web adapter ausgeliefert. Du solltest abet beides in ein img src pavjen können

BamBam89

@dirkhe

Ich bekomme ja auch eine Karte angezeigt, aber eben irgend einen "alten" Stand.
Das ist die Karte dir mir im VIS angezeigt wird:

Und das ist die aktuelle Karte wenn ich die APP auf dem Handy öffne:

Gruß Christian

dirkhe

@bambam89 Also dann schick mal dein Log (debug), da drin solltest du sehen, ob er deine Karte updatet oder nicht. Wie oft er das macht, kannst du auch einstellen.

BamBam89

@dirkhe

hier mal ein Auszug aus den Logs.

mihome-vacuum.0
2023-02-23 08:49:08.120	debug	MIIO RECIVE: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":70}

mihome-vacuum.0
2023-02-23 08:49:08.109	debug	Message= {"id":70,"method":"get_carpet_mode"}

mihome-vacuum.0
2023-02-23 08:49:08.108	debug	MIIO RECIVE: {"result":[100],"id":69}

mihome-vacuum.0
2023-02-23 08:49:08.099	debug	Message= {"id":69,"method":"get_sound_volume"}

mihome-vacuum.0
2023-02-23 08:49:08.069	debug	MIIO RECIVE: {"result":{"ssid":"Sonnensystem","ip":"192.168.2.51","mac":"50:ec:50:1a:8d:7a","bssid":"7c:ff:4d:85:1b:8f","rssi":-67},"id":68}

mihome-vacuum.0
2023-02-23 08:49:08.044	debug	Message= {"id":68,"method":"get_network_info"}

mihome-vacuum.0
2023-02-23 08:49:08.042	debug	setGetStatus {"msg_ver":3,"msg_seq":1888,"state":18,"battery":99,"clean_time":108,"clean_area":3117500,"error_code":0,"map_present":true,"in_cleaning":false,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":false,"map_status":3,"lock_status":0,"error_text":"No error"}

mihome-vacuum.0
2023-02-23 08:49:08.041	debug	MIIO RECIVE: {"result":[{"msg_ver":3,"msg_seq":1888,"state":18,"battery":99,"clean_time":108,"clean_area":3117500,"error_code":0,"map_present":1,"in_cleaning":3,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":0,"map_status":3,"lock_status":0}],"id":67}

mihome-vacuum.0
2023-02-23 08:49:08.032	debug	Message= {"id":67,"method":"get_status"}

mihome-vacuum.0
2023-02-23 08:49:08.032	debug	get params for stock Vacuum

mihome-vacuum.0
2023-02-23 08:49:01.800	debug	Time difference between Mihome Vacuum and ioBroker: 1 sec

mihome-vacuum.0
2023-02-23 08:49:01.799	debug	Receive <<< Helo <<< 21310020000000000f9b48a163f71a6effffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-02-23 08:48:57.991	debug	MIIO RECIVE: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":66}

mihome-vacuum.0
2023-02-23 08:48:57.981	debug	Message= {"id":66,"method":"get_carpet_mode"}

mihome-vacuum.0
2023-02-23 08:48:57.979	debug	MIIO RECIVE: {"result":[100],"id":65}

mihome-vacuum.0
2023-02-23 08:48:57.968	debug	Message= {"id":65,"method":"get_sound_volume"}

mihome-vacuum.0
2023-02-23 08:48:57.889	debug	MIIO RECIVE: {"result":{"ssid":"Sonnensystem","ip":"192.168.2.51","mac":"50:ec:50:1a:8d:7a","bssid":"7c:ff:4d:85:1b:8f","rssi":-67},"id":64}

mihome-vacuum.0
2023-02-23 08:48:57.858	debug	Message= {"id":64,"method":"get_network_info"}

mihome-vacuum.0
2023-02-23 08:48:57.855	debug	setGetStatus {"msg_ver":3,"msg_seq":1887,"state":18,"battery":99,"clean_time":96,"clean_area":2742500,"error_code":0,"map_present":true,"in_cleaning":false,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":false,"map_status":3,"lock_status":0,"error_text":"No error"}

mihome-vacuum.0
2023-02-23 08:48:57.853	debug	MIIO RECIVE: {"result":[{"msg_ver":3,"msg_seq":1887,"state":18,"battery":99,"clean_time":96,"clean_area":2742500,"error_code":0,"map_present":1,"in_cleaning":3,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":0,"map_status":3,"lock_status":0}],"id":63}

mihome-vacuum.0
2023-02-23 08:48:57.842	debug	Message= {"id":63,"method":"get_status"}

mihome-vacuum.0
2023-02-23 08:48:57.841	debug	get params for stock Vacuum

mihome-vacuum.0
2023-02-23 08:48:51.795	debug	Time difference between Mihome Vacuum and ioBroker: 1 sec

mihome-vacuum.0
2023-02-23 08:48:51.794	debug	Receive <<< Helo <<< 21310020000000000f9b48a163f71a64ffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-02-23 08:48:47.788	debug	MIIO RECIVE: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":62}

mihome-vacuum.0
2023-02-23 08:48:47.779	debug	Message= {"id":62,"method":"get_carpet_mode"}

mihome-vacuum.0
2023-02-23 08:48:47.777	debug	MIIO RECIVE: {"result":[100],"id":61}

mihome-vacuum.0
2023-02-23 08:48:47.769	debug	Message= {"id":61,"method":"get_sound_volume"}

mihome-vacuum.0
2023-02-23 08:48:47.707	debug	MIIO RECIVE: {"result":{"ssid":"Sonnensystem","ip":"192.168.2.51","mac":"50:ec:50:1a:8d:7a","bssid":"7c:ff:4d:85:1b:8f","rssi":-62},"id":60}

mihome-vacuum.0
2023-02-23 08:48:47.656	debug	Message= {"id":60,"method":"get_network_info"}

mihome-vacuum.0
2023-02-23 08:48:47.654	debug	setGetStatus {"msg_ver":3,"msg_seq":1886,"state":18,"battery":99,"clean_time":90,"clean_area":2392500,"error_code":0,"map_present":true,"in_cleaning":false,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":false,"map_status":3,"lock_status":0,"error_text":"No error"}

mihome-vacuum.0
2023-02-23 08:48:47.654	debug	MIIO RECIVE: {"result":[{"msg_ver":3,"msg_seq":1886,"state":18,"battery":99,"clean_time":90,"clean_area":2392500,"error_code":0,"map_present":1,"in_cleaning":3,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":0,"map_status":3,"lock_status":0}],"id":59}

mihome-vacuum.0
2023-02-23 08:48:47.629	debug	Message= {"id":59,"method":"get_status"}

mihome-vacuum.0
2023-02-23 08:48:47.629	debug	get params for stock Vacuum

mihome-vacuum.0
2023-02-23 08:48:40.655	debug	Time difference between Mihome Vacuum and ioBroker: 1 sec

mihome-vacuum.0
2023-02-23 08:48:40.655	debug	Receive <<< Helo <<< 21310020000000000f9b48a163f71a59ffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-02-23 08:48:37.502	debug	MIIO RECIVE: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":58}

mihome-vacuum.0
2023-02-23 08:48:37.492	debug	Message= {"id":58,"method":"get_carpet_mode"}

mihome-vacuum.0
2023-02-23 08:48:37.491	debug	MIIO RECIVE: {"result":[100],"id":57}

mihome-vacuum.0
2023-02-23 08:48:37.483	debug	Message= {"id":57,"method":"get_sound_volume"}

mihome-vacuum.0
2023-02-23 08:48:37.219	debug	MIIO RECIVE: {"result":{"ssid":"Sonnensystem","ip":"192.168.2.51","mac":"50:ec:50:1a:8d:7a","bssid":"7c:ff:4d:85:1b:8f","rssi":-62},"id":56}

mihome-vacuum.0
2023-02-23 08:48:37.189	debug	Message= {"id":56,"method":"get_network_info"}

mihome-vacuum.0
2023-02-23 08:48:37.188	debug	setGetStatus {"msg_ver":3,"msg_seq":1885,"state":18,"battery":99,"clean_time":79,"clean_area":1992500,"error_code":0,"map_present":true,"in_cleaning":false,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":false,"map_status":3,"lock_status":0,"error_text":"No error"}

Der Intervall steht auf 2 Sekunden:

dirkhe

@bambam89 Ähhh, da saugt er doch gar nicht. Du solltest schon zu der Zeit das log schicken, wo er saugt. Da müsste dann drin stehen, dass er eine neue Karte bekommt. Wenn du den Adapter startetest steht aber nicht von canvas Problemen?

BamBam89

@dirkhe

Der Log ist entstanden, als der S5 gesaugt hat.

aktueller Log: (saugt gerade)

mihome-vacuum.0
2023-02-23 18:54:16.376	debug	Receive <<< Helo <<< 21310020000000000f9b48a163f7a847ffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-02-23 18:54:10.918	debug	MIIO RECIVE: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":120}

mihome-vacuum.0
2023-02-23 18:54:10.912	debug	Message= {"id":120,"method":"get_carpet_mode"}

mihome-vacuum.0
2023-02-23 18:54:10.911	debug	MIIO RECIVE: {"result":[100],"id":119}

mihome-vacuum.0
2023-02-23 18:54:10.902	debug	Message= {"id":119,"method":"get_sound_volume"}

mihome-vacuum.0
2023-02-23 18:54:10.837	debug	MIIO RECIVE: {"result":{"ssid":"Sonnensystem","ip":"192.168.2.51","mac":"50:ec:50:1a:8d:7a","bssid":"b0:f2:08:c7:6e:83","rssi":-53},"id":118}

mihome-vacuum.0
2023-02-23 18:54:10.820	debug	Message= {"id":118,"method":"get_network_info"}

mihome-vacuum.0
2023-02-23 18:54:10.819	debug	setGetStatus {"msg_ver":3,"msg_seq":3966,"state":5,"battery":95,"clean_time":49,"clean_area":1210000,"error_code":0,"map_present":true,"in_cleaning":true,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":false,"map_status":3,"lock_status":0,"error_text":"No error"}

mihome-vacuum.0
2023-02-23 18:54:10.818	debug	MIIO RECIVE: {"result":[{"msg_ver":3,"msg_seq":3966,"state":5,"battery":95,"clean_time":49,"clean_area":1210000,"error_code":0,"map_present":1,"in_cleaning":1,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":0,"map_status":3,"lock_status":0}],"id":117}

mihome-vacuum.0
2023-02-23 18:54:10.363	debug	Message= {"id":117,"method":"get_status"}

mihome-vacuum.0
2023-02-23 18:54:10.362	debug	get params for stock Vacuum

mihome-vacuum.0
2023-02-23 18:54:06.370	debug	Receive <<< Helo <<< 21310020000000000f9b48a163f7a83dffffffffffffffffffffffffffffffff

mihome-vacuum.0
2023-02-23 18:54:00.282	debug	MIIO RECIVE: {"result":[{"enable":1,"current_integral":450,"current_high":500,"current_low":400,"stall_time":10}],"id":116}

mihome-vacuum.0
2023-02-23 18:54:00.275	debug	Message= {"id":116,"method":"get_carpet_mode"}

mihome-vacuum.0
2023-02-23 18:54:00.274	debug	MIIO RECIVE: {"result":[100],"id":115}

mihome-vacuum.0
2023-02-23 18:54:00.267	debug	Message= {"id":115,"method":"get_sound_volume"}

mihome-vacuum.0
2023-02-23 18:54:00.102	debug	MIIO RECIVE: {"result":{"ssid":"Sonnensystem","ip":"192.168.2.51","mac":"50:ec:50:1a:8d:7a","bssid":"b0:f2:08:c7:6e:83","rssi":-58},"id":114}

mihome-vacuum.0
2023-02-23 18:54:00.081	debug	Message= {"id":114,"method":"get_network_info"}

mihome-vacuum.0
2023-02-23 18:54:00.080	debug	setGetStatus {"msg_ver":3,"msg_seq":3965,"state":5,"battery":95,"clean_time":38,"clean_area":847500,"error_code":0,"map_present":true,"in_cleaning":true,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":false,"map_status":3,"lock_status":0,"error_text":"No error"}

mihome-vacuum.0
2023-02-23 18:54:00.079	debug	MIIO RECIVE: {"result":[{"msg_ver":3,"msg_seq":3965,"state":5,"battery":95,"clean_time":38,"clean_area":847500,"error_code":0,"map_present":1,"in_cleaning":1,"in_returning":0,"in_fresh_state":0,"lab_status":1,"water_box_status":0,"fan_power":103,"dnd_enabled":0,"map_status":3,"lock_status":0}],"id":113}

mihome-vacuum.0
2023-02-23 18:54:00.072	debug	Message= {"id":113,"method":"get_status"}

mihome-vacuum.0
2023-02-23 18:54:00.071	debug	get params for stock Vacuum

Hier sieht man das der Sauger gestartet wurde:

mihome-vacuum.0

2023-02-23 18:53:19.834	info	trigger cleaning all

dirkhe

@bambam89 er ruft aber keine karte ab, entweder in den einstellungen den haken nivgt gesetzt oder canvas ist nicht verfügbar

michael 1975

Zeit gestern verbindet sich mein Sauger S7max unltra nicht mehr adapter bleibt gelb

kann mir jemand helfen

Damrak2022

@dirkheDa ich keine Vis mehr nutze sondern das Node Red Dashboard, habe ich Probleme mit der Einbindung der Karte
Sobald ich die cleanmap.mapUrl mit der Iobroker in Node verbinde hängt sich das ganze System auf.
Oder mache ich hier einen Fehler und ich muss nur die Url, welche mir im Browser komplett angezeigt wird, nur in die template node packen?
So geht es jedenfalls nicht
Bildschirmfoto 2023-03-25 um 09.22.09.png

dirkhe

@damrak2022 das kann dir leider nicht beantworten, in den einem datenpunkt steht halt eine url, relativ zum internen webserver, in dem anderen steht das img halt als data string. Was du brauchst, mußt du halt selber wissen.

Damrak2022

@dirkhe Wenn ich aber meine Url:

http://192.168.178.24:8082/mihome-vacuum.0.cleanmap.mapURL

im Browser aufrufe, sollte er mir doch eigentlich die Karte anzeigen, oder?
Bei mir steht dann aber lediglich: File not found:{}

dirkhe

@damrak2022 nein, dh musst den inhalt des datenpunktes hinter die ip + port hängen

Damrak2022

@dirkhe Wenn ich das so mache

http://192.168.178.24:8082/mihome-vacuum.0.cleanmap.mapURL/mihome-vacuum.0.userfiles/actualMap.png

bekomme ich das als Ergebnis:
Bildschirmfoto 2023-03-26 um 21.44.48.png

Kann das sein das für die Karte zwingend Canvas installiert sein muss Ich hatte da nämlich mal ein Problem und da wurde mir geraten es wegzulassen.

Thomas Braun

@damrak2022 sagte in Test für mihome-vacuum 3.9.x:

Kann das sein das für die Karte zwingend Canvas installiert sein muss

Ja.

Damrak2022

@thomas-braun Okay, dann werde ich nochmal versuchen eine korrekte Canvas Installation nach der Beschreibung des mihome Adapters hinzubekommen.

Thomas Braun

@damrak2022

Die erforderlichen Pakete bringt ein

iob fix

auf den Rechner.

dirkhe

@damrak2022

http://192.168.178.24:8082/mihome-vacuum.0.userfiles/actualMap.png

Community Forum

NEWS

Test für mihome-vacuum 3.10.x

Support us

338

32.7k

82.5k

1.3m