[Aufruf] IKEA-Trådfri Adapter testen

AlCalzone

Ich hätte da noch eine kleine Bitte. Schaut mal auf eurer Gateway und sagt mir die ersten 6 Stellen der Seriennummer bzw. Mac-Adresse.

Homoran

~~@AlCalzone:~~

sagt mir die ersten 6 Stellen der Seriennummer bzw. Mac-Adresse. `
b0-72-bf

Gruß

Rainer

discovery lässt grüßen

AlCalzone

Genau daran denke ich

b0:72:bf… und ne positive Antwort auf DTLS-Anfrage ist relativ sicher ein Ikea-Gateway.

han_swurst

Hallo AlCalzone,

ich habe Deinen Adapter auch getestet (oder es versucht).

Unter Node 4.7.3 und 4.8.3 kann ich den Adapter nach Deiner Anleitung installieren.

Es kommt im Log aber leider die gleichen Meldungen wie bei @mctom :

host.bla	2017-05-09 13:43:39.501	info	Restart adapter system.adapter.tradfri.0 because enabled
host.bla	2017-05-09 13:43:39.501	error	instance system.adapter.tradfri.0 terminated with code null ()
host.bla	2017-05-09 13:43:39.500	warn	instance system.adapter.tradfri.0 terminated due to SIGABRT
host.bla	2017-05-09 13:43:37.914	info	instance system.adapter.tradfri.0 started with pid 117

Unter Node 6.10.3 kann ich den Adapter nicht mal von git installieren.

$ ./iobroker url "https://github.com/AlCalzone/ioBroker.tradfri" --debug
install https://github.com/AlCalzone/ioBroker.tradfri/tarball/master
npm install https://github.com/AlCalzone/ioBroker.tradfri/tarball/master --production --prefix "/opt/iobroker" (System call)
npm
 WARN lifecycle node-mbed-dtls@2.4.4~preinstall: cannot run in wd %s %s (wd=%s) node-mbed-dtls@2.4.4 node downloadDeps.js /opt/iobroker/node_modules/.staging/node-mbed-dtls-8b868442
> node-mbed-dtls@2.4.4 install /opt/iobroker/node_modules/coap-dtls/node_modules/node-mbed-dtls
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/coap-dtls/node_modules/node-mbed-dtls/build'make: Leaving directory '/opt/iobroker/node_modules/coap-dtls/node_modules/node-mbed-dtls/build'

make: *** No rule to make target 'Release/obj.target/mbedcrypto/mbedtls/library/aes.o', needed by 'Release/obj.target/mbedcrypto.a'.  Stop.
gyp
 ERR! build error 
gyp 
ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:276:23)
gyp ERR! stack     at emitTwo (events.js:106:13)
gyp ERR! stack     at ChildProcess.emit (events.js:191:7)
gyp 
ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:215:12)gyp ERR! System Linux 3.10.102

gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/coap-dtls/node_modules/node-mbed-dtlsgyp ERR! node -v v6.10.3
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok 

npm ERR! Linux 3.10.102npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "https://github.com/AlCalzone/ioBroker.tradfri/tarball/master" "--production" "--prefix" "/opt/iobroker"
npm ERR! node v6.10.3
npm ERR! npm 
 v3.10.10npm ERR! code ELIFECYCLE

npm ERR! node-mbed-dtls@2.4.4 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the node-mbed-dtls@2.4.4 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the node-mbed-dtls package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs node-mbed-dtls
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls node-mbed-dtls
npm ERR! There is likely additional logging output above.

npm ERR!
 Please include the following file with any support request:npm ERR!
     /opt/npm-debug.log
ERROR: Cannot parse /opt/iobroker/node_modules/iobroker.js-controller/adapter/tradfri/io-package.json:Error: ENOENT: no such file or directory, open '/opt/iobroker/node_modules/iobroker.js-controller/adapter/tradfri/io-package.json'
process exited with code 0

Kannst Du mir helfen? Achja, auch meine Mac-Adresse entspricht der Seriennummer.

MfG

Chris

Homoran

~~@han_swurst:~~

Achja, auch meine Mac-Adresse entspricht der Seriennummer. `
Das ist klar!

Die ersten drei Paare heben den Hersteller an.

Diese wollte alCalzone wissen.

Gruß

Rainer

AlCalzone

Ja, halte dich an die Installationsanleitung auf Github:
` > Installation on Raspberry PI

Make sure you have git installed. If not: sudo apt-get install git-core

Install this adapter via the ioBroker GUI -> This will result in an error

Open the console and navigate to /opt/iobroker/node_modules/iobroker.tradfri

There, run sudo npm install –production --unsafe-perm, this will take a while.

If neccessary, add an adapter instance, then configure it by entering the IP/hostname of your gateway and the security code that can be found under that. `

Die Installation erfordert git-core zum Nachladen von Paketen und erhöhte Rechte (–unsafe-perm) zur Kompilierung der Pakete. Beides kann ich für die automatische Installation leider nicht vorgeben (oder ich bin zu doof dafür).

Ich vermute, dir fehlt git, da er die Datei aes.o nicht findet:

make: *** No rule to make target 'Release/obj.target/mbedcrypto/mbedtls/library/aes.o', needed by 'Release/obj.target/mbedcrypto.a'.  Stop.

–

Da du schon der zweite mit dem gleichen Problem auf Node 4.x bist, kann ich mich wohl doch nicht einfach auf Travis verlassen...

Ich werde die Tage mal auf 4.x downgraden und schauen, ob ich die Ursache finde.

Hast du ein paar Details für mich zu deiner Umgebung?

Hardware / Software inkl. Versionen?

han_swurst

Hallo,

wie ich schon geschrieben habe, bin ich nach Deiner Anleitung vorgegangen

git-core ist drauf.

Beim Installieren unter 6.10.3 kommt er ja garnicht so weit das er unter iobroker/node_modules das Verzeichnis iobroker.tradfri erstellt.

Das ganze läuft in nem Docker-Container auf einer Synology.

iobroker und alle installierten Adapter sind aktuell.

MfG

Chris

Homoran

Hallo AlCalzone,

muss es wirklich git-core sein?

Ich hatte nur git installiert.

Auf welcher von meinen Plattformen es gerade läuft weiß ich gerade nicht. Müsste aber mindestens nodejs v6 sein.

Gruß

Rainer

AlCalzone

git-core ist ein subset von git, wenn man nicht alle Funktionen braucht. git sollte es also auch tun.

AlCalzone

~~@han_swurst:~~

Hallo,

wie ich schon geschrieben habe, bin ich nach Deiner Anleitung vorgegangen

git-core ist drauf.

Beim Installieren unter 6.10.3 kommt er ja garnicht so weit das er unter iobroker/node_modules das Verzeichnis iobroker.tradfri erstellt. `
Hmmm, probier mal anstatt der Installation per Admin-UI folgendes, dann kannst du dir auch Schritt 3/4 sparen:

cd /opt/iobroker
sudo npm install https://github.com/AlCalzone/ioBroker.tradfri/tarball/master --production --unsafe-perm

anschließend im Admin die Instanz hinzufügen oder

iobroker add tradfri

han_swurst

Hallo AlCalzone,

unter Node 6.10.3 ist der Adapter jetzt installiert, es kommt aber immer noch der gleiche Fehler:

host.bla 2017-05-10 16:58:42.165	error	instance system.adapter.tradfri.0 terminated with code null ()
host.bla 2017-05-10 16:58:42.165	warn	instance system.adapter.tradfri.0 terminated due to SIGABRT

MfG

Chris

AlCalzone

Ok, um das mal zusammenzufassen:

han_swurst: Docker-Container (VM?) => läuft nicht

mctom: VM => läuft nicht

Homoran: Raspberry (?) => läuft

ich: Raspberry => läuft

Welches Betriebssystem hab ihr am Laufen? Und hat jemand ne Idee, wie ich euer Setup replizieren kann für Tests?

Homoran

~~@AlCalzone:~~

Homoran: Raspberry (?) => läuft `
:lol: irgendwodrauf nur definitiv kein RasPi :lol:

Cubie, Tinker, pine64 oder nuc.

Ich muss nachsehen.

Edit:

Ist der nuc mit debian 9 netinstall "stretch" und nodejs 7.x

Installation habe ich allerdings schon mit der vorversion vom Adapter gemacht.

Gruß

Rainer

han_swurst

Hallo AlCalzone,

ich habs jetzt mit nem frisch installierten Raspi 3 und iobroker unter node 6.10.3 versucht.

Gleicher Fehler.

MfG

Chris

AlCalzone

okay… jetzt bin ich verwirrt.

Kannst du die Installationslogs mal in eine Datei umleiten und mir diese zukommen lassen?

sudo npm install [...]  2>&1 | tee log.txt

–-

Aber gut, dass du auf nem frischen Pi3 testen konntest... das kann ich nämlich auch.

Ich habe ne Vermutung, die ich später mal überprüfen werde. Auf meinem Dev-Pi läuft auch der zwave- und fhem(-Adapter), beide wollten vorher zusätzliche Pakete installiert haben. Eventuell brauchen wir auch eins davon, und das scheint dir zu fehlen.

Homoran

Ich habe es gerade auf einem meiner beiden Tinker unter nodejs 6.2 versucht.

Die Installation über den admin mittels pfad von github endet mit error 25.

Anschließend existiert der Ordner iobroker.tradfri unter /opt/iobroker/node_modules/ NICHT!

Gruß

Rainer

Homoran

Auch nach versuch über die Konsole kein trådfri ordner

! ````
linaro@linaro-alip:/opt/iobroker$ npm install https://github.com/AlCalzone/ioBroker.tradfri --production

node-mbed-dtls@2.4.4 preinstall /opt/iobroker/node_modules/.staging/node-mbed-dtls-a5e9e04f
node downloadDeps.js

Cloning into 'mbedtls'...

bufferutil@1.1.0 install /opt/iobroker/node_modules/bufferutil
node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/bufferutil/build'
CXX(target) Release/obj.target/bufferutil/src/bufferutil.o
In file included from ../node_modules/nan/nan.h:82:0,
from ../src/bufferutil.cc:16:
../node_modules/nan/nan_new.h: In function ‘v8::Local NanIntern::To(v8::Handlev8::integer) [with T = v8:
:Int32; v8::Handle v8::integer= v8::Localv8::integer]:
../node_modules/nan/nan_new.h:34:64: warning: ‘v8::Local v8::int32v8::Value::ToInt32() const’ is deprecated
(declared at /home/linaro/.node-gyp/6.10.2/include/node/v8.h:8202): Use maybe version [-Wdeprecated-declarat
ions]
Tov8::int32(v8::Handle v8::integeri) { return i->ToInt32(); }
^
../node_modules/nan/nan_new.h: In function ‘v8::Local NanIntern::To(v8::Handlev8::integer) [with T = v8:
:Uint32; v8::Handle v8::integer= v8::Localv8::integer]’:
../node_modules/nan/nan_new.h:39:65: warning: ‘v8::Local v8::uint32v8::Value::ToUint32() const’ is deprecat
ed (declared at /home/linaro/.node-gyp/6.10.2/include/node/v8.h:8196): Use maybe version [-Wdeprecated-declar
ations]
Tov8::uint32(v8::Handle v8::integeri) { return i->ToUint32(); }
^
In file included from ../node_modules/nan/nan_new.h:189:0,
from ../node_modules/nan/nan.h:82,
from ../src/bufferutil.cc:16:
../node_modules/nan/nan_implementation_12_inl.h: In static member function ‘static NanIntern::FactoryBase<v8: :booleanobject="">::return_t NanIntern::Factoryv8::booleanobject::New(bool)’:
../node_modules/nan/nan_implementation_12_inl.h:49:38: warning: ‘static v8::Local v8::valuev8::BooleanObjec
t::New(bool)’ is deprecated (declared at /home/linaro/.node-gyp/6.10.2/include/node/v8.h:4008): Pass an isola
te [-Wdeprecated-declarations]
return v8::BooleanObject::New(value).Asv8::booleanobject();
^
../node_modules/nan/nan_implementation_12_inl.h: In static member function ‘static NanIntern::FactoryBase<v8: :script="">::return_t NanIntern::Factoryv8::script::New(v8::Localv8::string)’:
../node_modules/nan/nan_implementation_12_inl.h:166:69: warning: ‘static v8::Local v8::scriptv8::ScriptComp
iler::Compile(v8::Isolate*, v8::ScriptCompiler::Source*, v8::ScriptCompiler::CompileOptions)’ is deprecated (
declared at /home/linaro/.node-gyp/6.10.2/include/node/v8.h:1352): Use maybe version [-Wdeprecated-declaratio
ns]
return v8::ScriptCompiler::Compile(v8::Isolate::GetCurrent(), &src);
^
../node_modules/nan/nan_implementation_12_inl.h: In static member function ‘static NanIntern::FactoryBase<v8: :script="">::return_t NanIntern::Factoryv8::script::New(v8::Localv8::string, const v8::ScriptOrigin&)’:
../node_modules/nan/nan_implementation_12_inl.h:173:69: warning: ‘static v8::Local v8::scriptv8::ScriptComp
iler::Compile(v8::Isolate*, v8::ScriptCompiler::Source*, v8::ScriptCompiler::CompileOptions)’ is deprecated (
declared at /home/linaro/.node-gyp/6.10.2/include/node/v8.h:1352): Use maybe version [-Wdeprecated-declaratio
ns]
return v8::ScriptCompiler::Compile(v8::Isolate::GetCurrent(), &src);
^
../node_modules/nan/nan_implementation_12_inl.h: In static member function ‘static NanIntern::FactoryBase<v8: :string="">::return_t NanIntern::Factoryv8::string::New(const uint8_t*, int)’:
../node_modules/nan/nan_implementation_12_inl.h:206:42: warning: ‘static v8::Local v8::stringv8::String::Ne
wFromOneByte(v8::Isolate*, const uint8_t*, v8::String::NewStringType, int)’ is deprecated (declared at /home/
linaro/.node-gyp/6.10.2/include/node/v8.h:2332): Use maybe version [-Wdeprecated-declarations]
v8::String::kNormalString, length);
^
../node_modules/nan/nan_implementation_12_inl.h: In static member function ‘static NanIntern::FactoryBase<v8: :string="">::return_t NanIntern::Factoryv8::string::New(v8::String::ExternalStringResource*)’:
../node_modules/nan/nan_implementation_12_inl.h:217:66: warning: ‘static v8::Local v8::stringv8::String::Ne
wExternal(v8::Isolate*, v8::String::ExternalStringResource*)’ is deprecated (declared at /home/linaro/.node-g
yp/6.10.2/include/node/v8.h:2371): Use maybe version [-Wdeprecated-declarations]
return v8::String::NewExternal(v8::Isolate::GetCurrent(), value);
^
../node_modules/nan/nan_implementation_12_inl.h: In static member function ‘static NanIntern::FactoryBase<v8: :unboundscript="">::return_t NanIntern::Factoryv8::unboundscript::New(v8::Localv8::string)’:
../node_modules/nan/nan_implementation_12_inl.h:237:76: warning: ‘static v8::Local v8::unboundscriptv8::Scr
iptCompiler::CompileUnbound(v8::Isolate*, v8::ScriptCompiler::Source*, v8::ScriptCompiler::CompileOptions)’ i
s deprecated (declared at /home/linaro/.node-gyp/6.10.2/include/node/v8.h:1333): Use maybe version [-Wdepreca
ted-declarations]
return v8::ScriptCompiler::CompileUnbound(v8::Isolate::GetCurrent(), &src);
^
../node_modules/nan/nan_implementation_12_inl.h: In static member function ‘static NanIntern::FactoryBase<v8: :unboundscript="">::return_t NanIntern::Factoryv8::unboundscript::New(v8::Localv8::string, const v8::ScriptO
rigin&)’:
../node_modules/nan/nan_implementation_12_inl.h:244:76: warning: ‘static v8::Local v8::unboundscriptv8::Scr
iptCompiler::CompileUnbound(v8::Isolate*, v8::ScriptCompiler::Source*, v8::ScriptCompiler::CompileOptions)’ i
s deprecated (declared at /home/linaro/.node-gyp/6.10.2/include/node/v8.h:1333): Use maybe version [-Wdepreca
ted-declarations]
return v8::ScriptCompiler::CompileUnbound(v8::Isolate::GetCurrent(), &src);
^
In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h: At global scope:
../node_modules/nan/nan.h:261:25: error: redefinition of ‘template <class t="">v8::Local _NanEnsureLocal(v8::
Local)’
NAN_INLINE v8::Local _NanEnsureLocal(v8::Local val) {
^
../node_modules/nan/nan.h:256:25: note: ‘template <class t="">v8::Local _NanEnsureLocal(v8::Handle)’ previ
ously declared here
NAN_INLINE v8::Local _NanEnsureLocal(v8::Handle val) {
^
../node_modules/nan/nan.h: In function ‘bool NanIdleNotification(int)’:
../node_modules/nan/nan.h:289:71: warning: ‘bool v8::Isolate::IdleNotification(int)’ is deprecated (declared
at /home/linaro/.node-gyp/6.10.2/include/node/v8.h:6114): use IdleNotificationDeadline() [-Wdeprecated-declar
ations]
return v8::Isolate::GetCurrent()->IdleNotification(idle_time_in_ms);
^
../node_modules/nan/nan.h: At global scope:
../node_modules/nan/nan.h:473:20: error: variable or field ‘NanAddGCEpilogueCallback’ declared void
v8::Isolate::GCEpilogueCallback callback
^
../node_modules/nan/nan.h:473:7: error: ‘GCEpilogueCallback’ is not a member of ‘v8::Isolate’
v8::Isolate::GCEpilogueCallback callback
^
../node_modules/nan/nan.h:474:18: error: expected primary-expression before ‘gc_type_filter’
, v8::GCType gc_type_filter = v8::kGCTypeAll) {
^
../node_modules/nan/nan.h:479:20: error: variable or field ‘NanRemoveGCEpilogueCallback’ declared void
v8::Isolate::GCEpilogueCallback callback) {
^
../node_modules/nan/nan.h:479:7: error: ‘GCEpilogueCallback’ is not a member of ‘v8::Isolate’
v8::Isolate::GCEpilogueCallback callback) {
^
../node_modules/nan/nan.h:484:20: error: variable or field ‘NanAddGCPrologueCallback’ declared void
v8::Isolate::GCPrologueCallback callback
^
../node_modules/nan/nan.h:484:7: error: ‘GCPrologueCallback’ is not a member of ‘v8::Isolate’
v8::Isolate::GCPrologueCallback callback
^
../node_modules/nan/nan.h:485:18: error: expected primary-expression before ‘gc_type_filter’
, v8::GCType gc_type_filter = v8::kGCTypeAll) {
^
../node_modules/nan/nan.h:490:20: error: variable or field ‘NanRemoveGCPrologueCallback’ declared void
v8::Isolate::GCPrologueCallback callback) {
^
../node_modules/nan/nan.h:490:7: error: ‘GCPrologueCallback’ is not a member of ‘v8::Isolate’
v8::Isolate::GCPrologueCallback callback) {
^
../node_modules/nan/nan.h:661:13: error: ‘node::smalloc’ has not been declared
, node::smalloc::FreeCallback callback
^
../node_modules/nan/nan.h:661:35: error: expected ‘,’ or ‘...’ before ‘callback’
, node::smalloc::FreeCallback callback
^
../node_modules/nan/nan.h: In function ‘v8::Local v8::objectNanNewBufferHandle(char*, size_t, int)’:
../node_modules/nan/nan.h:665:50: error: ‘callback’ was not declared in this scope
v8::Isolate::GetCurrent(), data, length, callback, hint);
^
../node_modules/nan/nan.h:665:60: error: ‘hint’ was not declared in this scope
v8::Isolate::GetCurrent(), data, length, callback, hint);
^
../node_modules/nan/nan.h: In function ‘v8::Local v8::objectNanNewBufferHandle(const char*, uint32_t)’:
../node_modules/nan/nan.h:672:67: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
return node::Buffer::New(v8::Isolate::GetCurrent(), data, size);
^
In file included from ../src/bufferutil.cc:10:0:
/home/linaro/.node-gyp/6.10.2/include/node/node_buffer.h:46:40: note: initializing argument 2 of ‘v8::MaybeLo
cal v8::objectnode::Buffer::New(v8::Isolate*, char*, size_t)’
NODE_EXTERN v8::MaybeLocal v8::objectNew(v8::Isolate* isolate,
^
In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:672:67: error: could not convert ‘node::Buffer::New(v8::Isolate::GetCurrent(), ((ch
ar*)data), size)’ from ‘v8::MaybeLocalv8::object’ to ‘v8::Localv8::object’
return node::Buffer::New(v8::Isolate::GetCurrent(), data, size);
^
../node_modules/nan/nan.h: In function ‘v8::Local v8::objectNanNewBufferHandle(uint32_t)’:
../node_modules/nan/nan.h:676:61: error: could not convert ‘node::Buffer::New(v8::Isolate::GetCurrent(), size
)’ from ‘v8::MaybeLocalv8::object’ to ‘v8::Localv8::object’
return node::Buffer::New(v8::Isolate::GetCurrent(), size);
^
../node_modules/nan/nan.h: In function ‘v8::Local v8::objectNanBufferUse(char*, uint32_t)’:
../node_modules/nan/nan.h:683:12: error: ‘Use’ is not a member of ‘node::Buffer’
return node::Buffer::Use(v8::Isolate::GetCurrent(), data, size);
^
../node_modules/nan/nan.h: In function ‘v8::Local v8::scriptNanCompileScript(v8::Localv8::string, const v
8::ScriptOrigin&)’:
../node_modules/nan/nan.h:710:74: warning: ‘static v8::Local v8::scriptv8::ScriptCompiler::Compile(v8::Isol
ate*, v8::ScriptCompiler::Source*, v8::ScriptCompiler::CompileOptions)’ is deprecated (declared at /home/lina
ro/.node-gyp/6.10.2/include/node/v8.h:1352): Use maybe version [-Wdeprecated-declarations]
return v8::ScriptCompiler::Compile(v8::Isolate::GetCurrent(), &source);
^
../node_modules/nan/nan.h: In function ‘v8::Local v8::scriptNanCompileScript(v8::Localv8::string)’:
../node_modules/nan/nan.h:717:74: warning: ‘static v8::Local v8::scriptv8::ScriptCompiler::Compile(v8::Isol
ate*, v8::ScriptCompiler::Source*, v8::ScriptCompiler::CompileOptions)’ is deprecated (declared at /home/lina
ro/.node-gyp/6.10.2/include/node/v8.h:1352): Use maybe version [-Wdeprecated-declarations]
return v8::ScriptCompiler::Compile(v8::Isolate::GetCurrent(), &source);
^
../src/bufferutil.cc: In static member function ‘static void BufferUtil::Initialize(v8::Handlev8::object)’:
../src/bufferutil.cc:30:52: error: call of overloaded ‘NODE_SET_METHOD(v8::Localv8::functiontemplate&, cons
t char [7], void (&)(const v8::FunctionCallbackInfov8::value&))’ is ambiguous
NODE_SET_METHOD(t, "unmask", BufferUtil::Unmask);
^
../src/bufferutil.cc:30:52: note: candidates are:
In file included from ../src/bufferutil.cc:8:0:
/home/linaro/.node-gyp/6.10.2/include/node/node.h:244:13: note: void node::NODE_SET_METHOD(v8::Local<v8::temp late="">, const char*, v8::FunctionCallback)
inline void NODE_SET_METHOD(v8::Local v8::templaterecv,
^
/home/linaro/.node-gyp/6.10.2/include/node/node.h:257:13: note: void node::NODE_SET_METHOD(v8::Local<v8::obje ct="">, const char*, v8::FunctionCallback)
inline void NODE_SET_METHOD(v8::Local v8::objectrecv,
^
../src/bufferutil.cc:31:48: error: call of overloaded ‘NODE_SET_METHOD(v8::Localv8::functiontemplate&, cons
t char [5], void (&)(const v8::FunctionCallbackInfov8::value&))’ is ambiguous
NODE_SET_METHOD(t, "mask", BufferUtil::Mask);
^
../src/bufferutil.cc:31:48: note: candidates are:
In file included from ../src/bufferutil.cc:8:0:
/home/linaro/.node-gyp/6.10.2/include/node/node.h:244:13: note: void node::NODE_SET_METHOD(v8::Local<v8::temp late="">, const char*, v8::FunctionCallback)
inline void NODE_SET_METHOD(v8::Local v8::templaterecv,
^
/home/linaro/.node-gyp/6.10.2/include/node/node.h:257:13: note: void node::NODE_SET_METHOD(v8::Local<v8::obje ct="">, const char*, v8::FunctionCallback)
inline void NODE_SET_METHOD(v8::Local v8::objectrecv,
^
../src/bufferutil.cc:32:50: error: call of overloaded ‘NODE_SET_METHOD(v8::Localv8::functiontemplate&, cons
t char [6], void (&)(const v8::FunctionCallbackInfov8::value&))’ is ambiguous
NODE_SET_METHOD(t, "merge", BufferUtil::Merge);
^
../src/bufferutil.cc:32:50: note: candidates are:
In file included from ../src/bufferutil.cc:8:0:
/home/linaro/.node-gyp/6.10.2/include/node/node.h:244:13: note: void node::NODE_SET_METHOD(v8::Local<v8::temp late="">, const char*, v8::FunctionCallback)
inline void NODE_SET_METHOD(v8::Local v8::templaterecv,
^
/home/linaro/.node-gyp/6.10.2/include/node/node.h:257:13: note: void node::NODE_SET_METHOD(v8::Local<v8::obje ct="">, const char*, v8::FunctionCallback)
inline void NODE_SET_METHOD(v8::Local v8::objectrecv,
^
bufferutil.target.mk:94: recipe for target 'Release/obj.target/bufferutil/src/bufferutil.o' failed
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/bufferutil/build'
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:276:2
3)
gyp ERR! stack at emitTwo (events.js:106:13)
gyp ERR! stack at ChildProcess.emit (events.js:191:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:215:12)
gyp ERR! System Linux 4.4.16
gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild
"
gyp ERR! cwd /opt/iobroker/node_modules/bufferutil
gyp ERR! node -v v6.10.2
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok

node-mbed-dtls@2.4.4 install /opt/iobroker/node_modules/node-mbed-dtls
node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/node-mbed-dtls/build'
CC(target) Release/obj.target/mbedcrypto/mbedtls/library/aes.o
CC(target) Release/obj.target/mbedcrypto/mbedtls/library/aesni.o
CC(target) Release/obj.target/mbedcrypto/mbedtls/library/arc4.o
CC(target) Release/obj.target/mbedcrypto/mbedtls/library/asn1parse.o
CC(target) Release/obj.target/mbedcrypto/mbedtls/library/asn1write.o
CC(target) Release/obj.target/mbedcrypto/mbedtls/library/base64.o
CC(target) Release/obj.target/mbedcrypto/mbedtls/library/bignum.o
../mbedtls/library/bignum.c: In function ‘mpi_mul_hlp’:
../mbedtls/library/bignum.c:1168:1: error: r7 cannot be used in asm here
}
^
../mbedtls/library/bignum.c:1168:1: error: r7 cannot be used in asm here
mbedcrypto.target.mk:144: recipe for target 'Release/obj.target/mbedcrypto/mbedtls/library/bignum.o' failed
make: *** [Release/obj.target/mbedcrypto/mbedtls/library/bignum.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/node-mbed-dtls/build'
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:276:2
3)
gyp ERR! stack at emitTwo (events.js:106:13)
gyp ERR! stack at ChildProcess.emit (events.js:191:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:215:12)
gyp ERR! System Linux 4.4.16
gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild
"
gyp ERR! cwd /opt/iobroker/node_modules/node-mbed-dtls
gyp ERR! node -v v6.10.2
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok
iobroker@1.0.0 /opt/iobroker
── (empty)

npm WARN babel-eslint@5.0.4 requires a peer of eslint@<2.3.0 but none was installed.
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: bufferutil@1.1.0 (node_modules/bufferutil):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: bufferutil@1.1.0 install: node-gyp rebuild
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
npm ERR! Linux 4.4.16
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "https://github.com/AlCalzone/ioBroker.tradfri" "--p
roduction"
npm ERR! node v6.10.2
npm ERR! npm v3.10.10
npm ERR! code ELIFECYCLE

npm ERR! node-mbed-dtls@2.4.4 install: node-gyp rebuild
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the node-mbed-dtls@2.4.4 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the node-mbed-dtls package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs node-mbed-dtls
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls node-mbed-dtls
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR! /opt/iobroker/npm-debug.log
npm ERR! code 1</v8::object></v8::obje></v8::template></v8::temp></v8::value></v8::functiontemplate></v8::object></v8::obje></v8::template></v8::temp></v8::value></v8::functiontemplate></v8::object></v8::obje></v8::template></v8::temp></v8::value></v8::functiontemplate></v8::object></v8::script></v8::string></v8::script></v8::script></v8::string></v8::script></v8::object></v8::object></v8::object></v8::object></v8::object></v8::object></v8::object></v8::object></v8::object></v8::object></class></class></v8::unboundscript></v8::string></v8::unboundscript></v8:></v8::unboundscript></v8::string></v8::unboundscript></v8:></v8::string></v8::string></v8:></v8::string></v8::string></v8:></v8::script></v8::string></v8::script></v8:></v8::script></v8::string></v8::script></v8:></v8::booleanobject></v8::value></v8::booleanobject></v8:></v8::integer></v8::uint32></v8::uint32></v8::integer></v8::integer></v8::integer></v8::integer></v8::int32></v8::int32></v8::integer></v8::integer></v8::integer>


Gruß

Rainer

han_swurst

Hallo AlCalzone,

ich hab den Pi nochmal frisch aufgesetzt um alles nochmal durchzuführen und meine Schritte zu dokumentieren.

Also gestartet wird mit nem frischen Pi3, anschließend node und iobroker installieren:

alten node Kram entfernen..

sudo apt-get --purge remove node
sudo apt-get --purge remove nodejs
sudo apt-get autoremove
sudo reboot

Repos für node 6.x einrichten und node 6.10.3 installieren:

curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -
sudo apt-get install -y build-essentials python nodejs
reboot

Verzeichnis für iobroker erstellen und iobroker installieren:

sudo mkdir /opt/iobroker
sudo chmod 777 /opt/iobroker
cd /opt/iobroker
sudo npm install iobroker --unsafe-perm

Beim installieren traten Fehler bei iobroker.discovery auf.

Keine Ahnung ob das für Dein Adapter relevant ist.

Hier mal das Log für die Installation von iobroker

log.txt

git-core und anschließend Deinen Adapter installieren:

sudo apt-get install git-core
sudo npm install https://github.com/AlCalzone/ioBroker.tradfri/tarball/master --production --unsafe-perm 2>&1 | tee tradfri_inst.log

Hier das Log der Installation

log.txt

Adapter instanzieren…

iobroker add tradfri

Ausgabe:

 iobroker add tradfri
 host.raspberrypi install adapter tradfri
 npm install –production (System call) in "/opt/iobroker/node_modules/iobroker.tradfri"
 got /opt/iobroker/node_modules/iobroker.tradfri/admin
 upload [2] tradfri.admin /opt/iobroker/node_modules/iobroker.tradfri/admin/words.js words.js application/javascript
 upload [1] tradfri.admin /opt/iobroker/node_modules/iobroker.tradfri/admin/tradfri.png tradfri.png image/png
 upload [0] tradfri.admin /opt/iobroker/node_modules/iobroker.tradfri/admin/index.html index.html text/html
 host.raspberrypi object system.adapter.tradfri created
 host.raspberrypi create instance tradfri
 host.raspberrypi object system.adapter.tradfri.0.outputCount created
 host.raspberrypi object system.adapter.tradfri.0.inputCount created
 host.raspberrypi object system.adapter.tradfri.0.uptime created
 host.raspberrypi object system.adapter.tradfri.0.memRss created
 host.raspberrypi object system.adapter.tradfri.0.memHeapTotal created
 host.raspberrypi object system.adapter.tradfri.0.memHeapUsed created
 host.raspberrypi object system.adapter.tradfri.0.connected created
 host.raspberrypi object system.adapter.tradfri.0.alive created
 host.raspberrypi object system.adapter.tradfri.0 created

Eingabe von IP und SecurityCode…

Und leider wieder derselbe Fehler im iobroker Log:

host.raspberrypi	2017-05-11 22:11:28.803	info	Restart adapter system.adapter.tradfri.0 because enabled
host.raspberrypi	2017-05-11 22:11:28.802	error	instance system.adapter.tradfri.0 terminated with code null ()
host.raspberrypi	2017-05-11 22:11:28.802	warn	instance system.adapter.tradfri.0 terminated due to SIGABRT
host.raspberrypi	2017-05-11 22:11:26.334	info	instance system.adapter.tradfri.0 started with pid 4488
host.raspberrypi	2017-05-11 22:10:56.317	info	Restart adapter system.adapter.tradfri.0 because enabled
host.raspberrypi	2017-05-11 22:10:56.316	error	instance system.adapter.tradfri.0 terminated with code null ()
host.raspberrypi	2017-05-11 22:10:56.315	warn	instance system.adapter.tradfri.0 terminated due to SIGABRT
host.raspberrypi	2017-05-11 22:10:53.745	info	instance system.adapter.tradfri.0 started with pid 4478
host.raspberrypi	2017-05-11 22:10:51.290	info	instance system.adapter.tradfri.0 terminated with code 0 (OK)
tradfri.0	2017-05-11 22:10:51.254	info	terminating
host.raspberrypi	2017-05-11 22:10:51.223	info	stopInstance system.adapter.tradfri.0 killing pid 4467
host.raspberrypi	2017-05-11 22:10:51.222	info	stopInstance system.adapter.tradfri.0
host.raspberrypi	2017-05-11 22:10:51.217	info	object change system.adapter.tradfri.0
tradfri.0	2017-05-11 22:06:41.889	info	requesting coap endpoint /15001
tradfri.0	2017-05-11 22:06:41.837	info	starting. Version 0.1.2 in /opt/iobroker/node_modules/iobroker.tradfri, node: v6.10.3
host.raspberrypi	2017-05-11 22:06:39.392	info	instance system.adapter.tradfri.0 started with pid 4467
host.raspberrypi	2017-05-11 22:06:39.358	info	object change system.adapter.tradfri.0

Was mir noch aufgefallen ist, die Instanz des Adapters terminiert sich sobald sie eine IP konfiguriert hat. Im unkonfiguriertem Zustand, oder wenn die IP gelöscht wird, bleibt die Instanz gestartet.

MfG

Chris

AlCalzone

~~@han_swurst:~~

> mdns@2.3.3 install /opt/iobroker/node_modules/mdns
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/mdns/build'
CXX(target) Release/obj.target/dns_sd_bindings/src/dns_sd.o
In file included from ../src/dns_sd.cpp:1:0:
../src/mdns.hpp:32:20: fatal error: dns_sd.h: Datei oder Verzeichnis nicht gefunden
#include <dns_sd.h>
^
compilation terminated.
dns_sd_bindings.target.mk:149: recipe for target 'Release/obj.target/dns_sd_bindings/src/dns_sd.o' failed
make: *** [Release/obj.target/dns_sd_bindings/src/dns_sd.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/mdns/build'</dns_sd.h>
```` `

Da haben wir's doch! Ich schau, wie man das beheben/verhindern kann.

AlCalzone

~~@Homoran:~~

Auch nach versuch über die Konsole kein trådfri ordner

                                 
  CC(target) Release/obj.target/mbedcrypto/mbedtls/library/bignum.o                                          
../mbedtls/library/bignum.c: In function ‘mpi_mul_hlp’:                                                      
../mbedtls/library/bignum.c:1168:1: error: r7 cannot be used in asm here                                     
 }                                                                                                           
 ^                                                                                                           
../mbedtls/library/bignum.c:1168:1: error: r7 cannot be used in asm here                                     
mbedcrypto.target.mk:144: recipe for target 'Release/obj.target/mbedcrypto/mbedtls/library/bignum.o' failed  

```` `

Die DTLS-Library scheint hier nicht kompatibel zu sein Muss ich mal schauen, ob ich ein anderes Paket finde.

NEWS

[Aufruf] IKEA-Trådfri Adapter testen

Support us

1.6k
Online

30.4k
Users

76.6k
Topics

1.2m
Posts

NEWS

[Aufruf] IKEA-Trådfri Adapter testen

Support us

1.6kOnline

30.4kUsers

76.6kTopics

1.2mPosts

1.6k
Online

30.4k
Users

76.6k
Topics

1.2m
Posts