EXT4-fs error (device sda2) - Raspberry stürzt ab
-
@planipes
oder zu schwaches Netzteil? -
@planipes sagte in EXT4-fs error (device sda2) - Raspberry stürzt ab:
Ab und an gab es mal ein paar Abstürze aber nach dem Neustart lief er wieder.
Allein das ist schon nicht normal. Meine Raspies dudeln komplett unauffällig hier dauerhaft durch.
-
Hi, Danke für eure Hilfe. Ihr seit ja echt schnell. Gerade läuft das Gerät wieder. So konnte ich den Befehl auch eingeben. Das Netzteil bringt eigentlich genug Leistung. Bei der SSD hatte ich damals tatsächlich ein paar Probleme mit USB 3. Irgendwie hat es auf diesen Ports Iobroker nicht gestartet. Auf den USB2 Ports läuft die SSD aber. Meint ihr das Dateisystem ist zerschossen und ich sollte alles nochmal platt machen. Danach das Backup für Iobroker wieder einspielen? Wie könnte ich auf diesem Weg das USB3 Problem lösen? Oder gibt es einen anderes Problem für diesen Fehler.
Hier übrigens der Code:
pi@iobroker-pi:~ $ sudo ln -s /usr/bin/node /usr/bin/nodejs ln: failed to create symbolic link '/usr/bin/nodejs': File exists pi@iobroker-pi:~ $ uname -m && type -P nodejs node npm && nodejs -v && node -v & & npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs armv7l /usr/bin/nodejs /usr/bin/node /usr/bin/npm v16.17.1 v16.17.1 8.15.0 4.0.23 pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker /home/piDanke noch einmal
-
@planipes sagte in EXT4-fs error (device sda2) - Raspberry stürzt ab:
Meint ihr das Dateisystem ist zerschossen
Mit großer Sicherheit.
Was steht z. B. indmesg -wTdrin, während du Operationen auf dem Dateisystem durchführst?
Z. B einsudo apt update sudo apt full-upgrade -
So, das wäre mal das was raus kommt wenn ich dmesg -wT eingegeben habe.
[Wed Oct 19 17:29:43 2022] Booting Linux on physical CPU 0x0 [Wed Oct 19 17:29:43 2022] Linux version 5.10.103-v7l+ (dom@buildbot) (arm-linux -gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1529 SMP Tue Mar 8 12:24:00 GMT 2022 [Wed Oct 19 17:29:43 2022] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [Wed Oct 19 17:29:43 2022] CPU: div instructions available: patching division code [Wed Oct 19 17:29:43 2022] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [Wed Oct 19 17:29:43 2022] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 [Wed Oct 19 17:29:43 2022] random: fast init done [Wed Oct 19 17:29:43 2022] Memory policy: Data cache writealloc [Wed Oct 19 17:29:43 2022] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [Wed Oct 19 17:29:43 2022] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Wed Oct 19 17:29:43 2022] Zone ranges: [Wed Oct 19 17:29:43 2022] DMA [mem 0x0000000000000000-0x000000002fffffff] [Wed Oct 19 17:29:43 2022] Normal empty [Wed Oct 19 17:29:43 2022] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [Wed Oct 19 17:29:43 2022] Movable zone start for each node [Wed Oct 19 17:29:43 2022] Early memory node ranges [Wed Oct 19 17:29:43 2022] node 0: [mem 0x0000000000000000-0x000000003e5ffff f] [Wed Oct 19 17:29:43 2022] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [Wed Oct 19 17:29:43 2022] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [Wed Oct 19 17:29:43 2022] On node 0 totalpages: 1025536 [Wed Oct 19 17:29:43 2022] DMA zone: 1728 pages used for memmap [Wed Oct 19 17:29:43 2022] DMA zone: 0 pages reserved [Wed Oct 19 17:29:43 2022] DMA zone: 196608 pages, LIFO batch:63 [Wed Oct 19 17:29:43 2022] HighMem zone: 828928 pages, LIFO batch:63 [Wed Oct 19 17:29:43 2022] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920 [Wed Oct 19 17:29:43 2022] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [Wed Oct 19 17:29:43 2022] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Wed Oct 19 17:29:43 2022] Built 1 zonelists, mobility grouping on. Total pages : 1023808 [Wed Oct 19 17:29:43 2022] Kernel command line: coherent_pool=1M 8250.nr_uarts=0snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1200M@60 smsc95xx.macaddr=DC:A6:32:91:BC:2E vc_mem.mem_base=0x3f000000 vc_mem.me m_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=d5481ddf-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Oct 19 17:29:43 2022] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Wed Oct 19 17:29:43 2022] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Wed Oct 19 17:29:43 2022] mem auto-init: stack:off, heap alloc:off, heap free:off [Wed Oct 19 17:29:43 2022] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB) [Wed Oct 19 17:29:43 2022] Memory: 3651872K/4102144K available (10240K kernel code, 1366K rwdata, 3196K rodata, 2048K init, 882K bss, 122592K reserved, 327680K cma-reserved, 3315712K highmem) [Wed Oct 19 17:29:43 2022] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Wed Oct 19 17:29:43 2022] ftrace: allocating 34355 entries in 101 pages [Wed Oct 19 17:29:43 2022] ftrace: allocated 101 pages with 4 groups [Wed Oct 19 17:29:43 2022] rcu: Hierarchical RCU implementation. [Wed Oct 19 17:29:43 2022] Rude variant of Tasks RCU enabled. [Wed Oct 19 17:29:43 2022] Tracing variant of Tasks RCU enabled. [Wed Oct 19 17:29:43 2022] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Wed Oct 19 17:29:43 2022] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Wed Oct 19 17:29:43 2022] GIC: Using split EOI/Deactivate mode [Wed Oct 19 17:29:43 2022] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=1 [Wed Oct 19 17:29:43 2022] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [Wed Oct 19 17:29:43 2022] clocksource: timer: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 1911260446275 ns [Wed Oct 19 17:29:43 2022] bcm2835: system timer (irq = 25) [Wed Oct 19 17:29:43 2022] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [Wed Oct 19 17:29:43 2022] clocksource: arch_sys_counter: mask: 0xffffffffffffffmax_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [Wed Oct 19 17:29:43 2022] sched_clock: 56 bits at 54MHz, resolution 18ns, wrapsevery 4398046511102ns [Wed Oct 19 17:29:43 2022] Switching to timer-based delay loop, resolution 18ns [Wed Oct 19 17:29:43 2022] Console: colour dummy device 80x30 [Wed Oct 19 17:29:43 2022] printk: console [tty1] enabled [Wed Oct 19 17:29:43 2022] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [Wed Oct 19 17:29:43 2022] pid_max: default: 32768 minimum: 301 [Wed Oct 19 17:29:43 2022] LSM: Security Framework initializing [Wed Oct 19 17:29:43 2022] Mount-cache hash table entries: 2048 (order: 1, 8192bytes, linear) [Wed Oct 19 17:29:43 2022] Mountpoint-cache hash table entries: 2048 (order: 1,8192 bytes, linear) [Wed Oct 19 17:29:43 2022] cgroup: Disabling memory control group subsystem [Wed Oct 19 17:29:43 2022] CPU: Testing write buffer coherency: ok [Wed Oct 19 17:29:43 2022] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Wed Oct 19 17:29:43 2022] Setting up static identity map for 0x200000 - 0x20003c [Wed Oct 19 17:29:43 2022] rcu: Hierarchical SRCU implementation. [Wed Oct 19 17:29:43 2022] smp: Bringing up secondary CPUs ... [Wed Oct 19 17:29:43 2022] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Wed Oct 19 17:29:43 2022] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Wed Oct 19 17:29:43 2022] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Wed Oct 19 17:29:43 2022] smp: Brought up 1 node, 4 CPUs [Wed Oct 19 17:29:43 2022] SMP: Total of 4 processors activated (432.00 BogoMIPS). [Wed Oct 19 17:29:43 2022] CPU: All CPU(s) started in HYP mode. [Wed Oct 19 17:29:43 2022] CPU: Virtualization extensions available. [Wed Oct 19 17:29:43 2022] devtmpfs: initialized [Wed Oct 19 17:29:43 2022] VFP support v0.3: implementor 41 architecture 3 part40 variant 8 rev 0 [Wed Oct 19 17:29:43 2022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Wed Oct 19 17:29:43 2022] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Wed Oct 19 17:29:43 2022] pinctrl core: initialized pinctrl subsystem [Wed Oct 19 17:29:43 2022] NET: Registered protocol family 16 [Wed Oct 19 17:29:43 2022] DMA: preallocated 1024 KiB pool for atomic coherent a llocations [Wed Oct 19 17:29:43 2022] audit: initializing netlink subsys (disabled) [Wed Oct 19 17:29:43 2022] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [Wed Oct 19 17:29:43 2022] thermal_sys: Registered thermal governor 'step_wise' [Wed Oct 19 17:29:43 2022] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Wed Oct 19 17:29:43 2022] hw-breakpoint: maximum watchpoint size is 8 bytes. [Wed Oct 19 17:29:43 2022] Serial: AMBA PL011 UART driver [Wed Oct 19 17:29:43 2022] bcm2835-mbox fe00b880.mailbox: mailbox enabled [Wed Oct 19 17:29:43 2022] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-12-01T15:02:10, variant start_cd [Wed Oct 19 17:29:43 2022] raspberrypi-firmware soc:firmware: Firmware hash is 7 1bd3109023a0c8575585ba87cbb374d2eeb038f [Wed Oct 19 17:29:43 2022] Kprobes globally optimized [Wed Oct 19 17:29:43 2022] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [Wed Oct 19 17:29:43 2022] vgaarb: loaded [Wed Oct 19 17:29:43 2022] SCSI subsystem initialized [Wed Oct 19 17:29:43 2022] usbcore: registered new interface driver usbfs [Wed Oct 19 17:29:43 2022] usbcore: registered new interface driver hub [Wed Oct 19 17:29:43 2022] usbcore: registered new device driver usb [Wed Oct 19 17:29:43 2022] usb_phy_generic phy: supply vcc not found, using dummy regulator [Wed Oct 19 17:29:43 2022] clocksource: Switched to clocksource arch_sys_counter [Wed Oct 19 17:29:44 2022] VFS: Disk quotas dquot_6.6.0 [Wed Oct 19 17:29:44 2022] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Wed Oct 19 17:29:44 2022] FS-Cache: Loaded [Wed Oct 19 17:29:44 2022] CacheFiles: Loaded [Wed Oct 19 17:29:44 2022] simple-framebuffer 3eb5f000.framebuffer: framebuffer at 0x3eb5f000, 0x465000 bytes, mapped to 0x(ptrval) [Wed Oct 19 17:29:44 2022] simple-framebuffer 3eb5f000.framebuffer: format=r5g6b5, mode=1920x1200x16, linelength=3840 [Wed Oct 19 17:29:44 2022] Console: switching to colour frame buffer device 240x75 [Wed Oct 19 17:29:44 2022] simple-framebuffer 3eb5f000.framebuffer: fb0: simplefb registered! [Wed Oct 19 17:29:44 2022] NET: Registered protocol family 2 [Wed Oct 19 17:29:44 2022] IP idents hash table entries: 16384 (order: 5, 131072bytes, linear) [Wed Oct 19 17:29:44 2022] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Wed Oct 19 17:29:44 2022] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Wed Oct 19 17:29:44 2022] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Wed Oct 19 17:29:44 2022] TCP: Hash tables configured (established 8192 bind 8192) [Wed Oct 19 17:29:44 2022] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Wed Oct 19 17:29:44 2022] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Wed Oct 19 17:29:44 2022] NET: Registered protocol family 1 [Wed Oct 19 17:29:44 2022] RPC: Registered named UNIX socket transport module. [Wed Oct 19 17:29:44 2022] RPC: Registered udp transport module. [Wed Oct 19 17:29:44 2022] RPC: Registered tcp transport module. [Wed Oct 19 17:29:44 2022] RPC: Registered tcp NFSv4.1 backchannel transport module. [Wed Oct 19 17:29:44 2022] PCI: CLS 0 bytes, default 64 [Wed Oct 19 17:29:44 2022] Initialise system trusted keyrings [Wed Oct 19 17:29:44 2022] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [Wed Oct 19 17:29:44 2022] zbud: loaded [Wed Oct 19 17:29:44 2022] FS-Cache: Netfs 'nfs' registered for caching [Wed Oct 19 17:29:44 2022] NFS: Registering the id_resolver key type [Wed Oct 19 17:29:44 2022] Key type id_resolver registered [Wed Oct 19 17:29:44 2022] Key type id_legacy registered [Wed Oct 19 17:29:44 2022] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Wed Oct 19 17:29:44 2022] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [Wed Oct 19 17:29:44 2022] Key type asymmetric registered [Wed Oct 19 17:29:44 2022] Asymmetric key parser 'x509' registered [Wed Oct 19 17:29:44 2022] bounce: pool size: 64 pages [Wed Oct 19 17:29:44 2022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Wed Oct 19 17:29:44 2022] io scheduler mq-deadline registered [Wed Oct 19 17:29:44 2022] io scheduler kyber registered [Wed Oct 19 17:29:44 2022] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [Wed Oct 19 17:29:44 2022] brcm-pcie fd500000.pcie: No bus range found for /sc b/pcie@7d500000, using [bus 00-ff] [Wed Oct 19 17:29:44 2022] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [Wed Oct 19 17:29:44 2022] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [Wed Oct 19 17:29:44 2022] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [Wed Oct 19 17:29:44 2022] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [Wed Oct 19 17:29:44 2022] pci_bus 0000:00: root bus resource [bus 00-ff] [Wed Oct 19 17:29:44 2022] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [Wed Oct 19 17:29:44 2022] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [Wed Oct 19 17:29:44 2022] pci 0000:00:00.0: PME# supported from D0 D3hot [Wed Oct 19 17:29:44 2022] PCI: bus0: Fast back to back transfers disabled [Wed Oct 19 17:29:44 2022] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [Wed Oct 19 17:29:44 2022] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [Wed Oct 19 17:29:44 2022] pci 0000:01:00.0: PME# supported from D0 D3cold [Wed Oct 19 17:29:44 2022] PCI: bus1: Fast back to back transfers disabled [Wed Oct 19 17:29:44 2022] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [Wed Oct 19 17:29:44 2022] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [Wed Oct 19 17:29:44 2022] pci 0000:00:00.0: PCI bridge to [bus 01] [Wed Oct 19 17:29:44 2022] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [Wed Oct 19 17:29:44 2022] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [Wed Oct 19 17:29:44 2022] pcieport 0000:00:00.0: PME: Signaling with IRQ 63 [Wed Oct 19 17:29:44 2022] iproc-rng200 fe104000.rng: hwrng registered [Wed Oct 19 17:29:44 2022] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB) [Wed Oct 19 17:29:44 2022] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [Wed Oct 19 17:29:44 2022] brd: module loaded [Wed Oct 19 17:29:44 2022] loop: module loaded [Wed Oct 19 17:29:44 2022] Loading iSCSI transport class v2.0-870. [Wed Oct 19 17:29:44 2022] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [Wed Oct 19 17:29:44 2022] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [Wed Oct 19 17:29:44 2022] usbcore: registered new interface driver r8152 [Wed Oct 19 17:29:44 2022] usbcore: registered new interface driver lan78xx [Wed Oct 19 17:29:44 2022] usbcore: registered new interface driver smsc95xx [Wed Oct 19 17:29:44 2022] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [Wed Oct 19 17:29:44 2022] xhci_hcd 0000:01:00.0: xHCI Host Controller [Wed Oct 19 17:29:44 2022] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [Wed Oct 19 17:29:44 2022] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890 [Wed Oct 19 17:29:44 2022] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Wed Oct 19 17:29:44 2022] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Wed Oct 19 17:29:44 2022] usb usb1: Product: xHCI Host Controller [Wed Oct 19 17:29:44 2022] usb usb1: Manufacturer: Linux 5.10.103-v7l+ xhci-hcd [Wed Oct 19 17:29:44 2022] usb usb1: SerialNumber: 0000:01:00.0 [Wed Oct 19 17:29:44 2022] hub 1-0:1.0: USB hub found [Wed Oct 19 17:29:44 2022] hub 1-0:1.0: 1 port detected [Wed Oct 19 17:29:44 2022] xhci_hcd 0000:01:00.0: xHCI Host Controller [Wed Oct 19 17:29:44 2022] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [Wed Oct 19 17:29:44 2022] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [Wed Oct 19 17:29:44 2022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [Wed Oct 19 17:29:44 2022] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Wed Oct 19 17:29:44 2022] usb usb2: Product: xHCI Host Controller [Wed Oct 19 17:29:44 2022] usb usb2: Manufacturer: Linux 5.10.103-v7l+ xhci-hcd [Wed Oct 19 17:29:44 2022] usb usb2: SerialNumber: 0000:01:00.0 [Wed Oct 19 17:29:44 2022] hub 2-0:1.0: USB hub found [Wed Oct 19 17:29:44 2022] hub 2-0:1.0: 4 ports detected [Wed Oct 19 17:29:44 2022] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Wed Oct 19 17:29:44 2022] dwc_otg: FIQ enabled [Wed Oct 19 17:29:44 2022] dwc_otg: NAK holdoff enabled [Wed Oct 19 17:29:44 2022] dwc_otg: FIQ split-transaction FSM enabled [Wed Oct 19 17:29:44 2022] Module dwc_common_port init [Wed Oct 19 17:29:44 2022] usbcore: registered new interface driver uas [Wed Oct 19 17:29:44 2022] usbcore: registered new interface driver usb-storage [Wed Oct 19 17:29:44 2022] mousedev: PS/2 mouse device common for all mice [Wed Oct 19 17:29:44 2022] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Wed Oct 19 17:29:44 2022] sdhci: Secure Digital Host Controller Interface driver [Wed Oct 19 17:29:44 2022] sdhci: Copyright(c) Pierre Ossman [Wed Oct 19 17:29:44 2022] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [Wed Oct 19 17:29:44 2022] sdhci-pltfm: SDHCI platform and OF driver helper [Wed Oct 19 17:29:44 2022] ledtrig-cpu: registered to indicate activity on CPUs [Wed Oct 19 17:29:44 2022] hid: raw HID events driver (C) Jiri Kosina [Wed Oct 19 17:29:44 2022] usbcore: registered new interface driver usbhid [Wed Oct 19 17:29:44 2022] usbhid: USB HID core driver [Wed Oct 19 17:29:44 2022] Initializing XFRM netlink socket [Wed Oct 19 17:29:44 2022] NET: Registered protocol family 17 [Wed Oct 19 17:29:44 2022] Key type dns_resolver registered [Wed Oct 19 17:29:44 2022] Registering SWP/SWPB emulation handler [Wed Oct 19 17:29:44 2022] registered taskstats version 1 [Wed Oct 19 17:29:44 2022] Loading compiled-in X.509 certificates [Wed Oct 19 17:29:44 2022] Key type ._fscrypt registered [Wed Oct 19 17:29:44 2022] Key type .fscrypt registered [Wed Oct 19 17:29:44 2022] Key type fscrypt-provisioning registered [Wed Oct 19 17:29:44 2022] uart-pl011 fe201000.serial: there is not valid maps for state default [Wed Oct 19 17:29:44 2022] uart-pl011 fe201000.serial: cts_event_workaround enabled [Wed Oct 19 17:29:44 2022] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [Wed Oct 19 17:29:44 2022] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Wed Oct 19 17:29:44 2022] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Wed Oct 19 17:29:44 2022] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [Wed Oct 19 17:29:44 2022] of_cfs_init [Wed Oct 19 17:29:44 2022] of_cfs_init: OK [Wed Oct 19 17:29:44 2022] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Wed Oct 19 17:29:44 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Wed Oct 19 17:29:44 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Wed Oct 19 17:29:44 2022] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Wed Oct 19 17:29:44 2022] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [Wed Oct 19 17:29:44 2022] Waiting for root device PARTUUID=d5481ddf-02... [Wed Oct 19 17:29:44 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Wed Oct 19 17:29:44 2022] mmc1: new high speed SDIO card at address 0001 [Wed Oct 19 17:29:44 2022] usb 1-1: new high-speed USB device number 2 using xhci_hcd [Wed Oct 19 17:29:44 2022] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [Wed Oct 19 17:29:44 2022] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [Wed Oct 19 17:29:44 2022] usb 1-1: Product: USB2.0 Hub [Wed Oct 19 17:29:44 2022] hub 1-1:1.0: USB hub found [Wed Oct 19 17:29:44 2022] hub 1-1:1.0: 4 ports detected [Wed Oct 19 17:29:45 2022] usb 1-1.3: new full-speed USB device number 3 using x hci_hcd [Wed Oct 19 17:29:45 2022] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [Wed Oct 19 17:29:45 2022] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Wed Oct 19 17:29:45 2022] usb 1-1.3: Product: ConBee II [Wed Oct 19 17:29:45 2022] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [Wed Oct 19 17:29:45 2022] usb 1-1.3: SerialNumber: DE2251733 [Wed Oct 19 17:29:45 2022] usb 1-1.4: new high-speed USB device number 4 using x hci_hcd [Wed Oct 19 17:29:45 2022] usb 1-1.4: New USB device found, idVendor=152d, idProduct=0579, bcdDevice= 5.06 [Wed Oct 19 17:29:45 2022] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Wed Oct 19 17:29:45 2022] usb 1-1.4: Product: Portable SSD [Wed Oct 19 17:29:45 2022] usb 1-1.4: Manufacturer: Intenso [Wed Oct 19 17:29:45 2022] usb 1-1.4: SerialNumber: 202009080050A [Wed Oct 19 17:29:45 2022] scsi host0: uas [Wed Oct 19 17:29:45 2022] scsi 0:0:0:0: Direct-Access Intenso Portable SSD 0506 PQ: 0 ANSI: 6 [Wed Oct 19 17:29:45 2022] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [Wed Oct 19 17:29:45 2022] sd 0:0:0:0: [sda] 4096-byte physical blocks [Wed Oct 19 17:29:45 2022] sd 0:0:0:0: [sda] Write Protect is off [Wed Oct 19 17:29:45 2022] sd 0:0:0:0: [sda] Mode Sense: 5f 00 00 08 [Wed Oct 19 17:29:45 2022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [Wed Oct 19 17:29:45 2022] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [Wed Oct 19 17:29:45 2022] sda: sda1 sda2 [Wed Oct 19 17:29:45 2022] sd 0:0:0:0: [sda] Attached SCSI disk [Wed Oct 19 17:29:45 2022] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [Wed Oct 19 17:29:45 2022] EXT4-fs (sda2): write access will be enabled during recovery [Wed Oct 19 17:29:45 2022] EXT4-fs (sda2): recovery complete [Wed Oct 19 17:29:45 2022] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Wed Oct 19 17:29:45 2022] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Oct 19 17:29:45 2022] devtmpfs: mounted [Wed Oct 19 17:29:45 2022] Freeing unused kernel memory: 2048K [Wed Oct 19 17:29:45 2022] Run /sbin/init as init process [Wed Oct 19 17:29:45 2022] with arguments: [Wed Oct 19 17:29:45 2022] /sbin/init [Wed Oct 19 17:29:45 2022] with environment: [Wed Oct 19 17:29:45 2022] HOME=/ [Wed Oct 19 17:29:45 2022] TERM=linux [Wed Oct 19 17:29:46 2022] systemd[1]: System time before build time, advancing clock. [Wed Oct 19 17:29:46 2022] NET: Registered protocol family 10 [Wed Oct 19 17:29:46 2022] Segment Routing with IPv6 [Wed Oct 19 17:29:46 2022] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hi erarchy=hybrid) [Wed Oct 19 17:29:46 2022] systemd[1]: Detected architecture arm. [Wed Oct 19 17:29:46 2022] systemd[1]: Set hostname to <iobroker-pi>. [Wed Oct 19 17:29:47 2022] random: systemd: uninitialized urandom read (16 bytes read) [Wed Oct 19 17:29:47 2022] random: systemd: uninitialized urandom read (16 bytes read) [Wed Oct 19 17:29:47 2022] systemd[1]: Created slice system-getty.slice. [Wed Oct 19 17:29:47 2022] random: systemd: uninitialized urandom read (16 bytes read) [Wed Oct 19 17:29:47 2022] systemd[1]: Listening on Syslog Socket. [Wed Oct 19 17:29:47 2022] systemd[1]: Listening on Journal Audit Socket. [Wed Oct 19 17:29:47 2022] systemd[1]: Listening on Journal Socket (/dev/log). [Wed Oct 19 17:29:47 2022] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [Wed Oct 19 17:29:47 2022] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Wed Oct 19 17:29:47 2022] systemd[1]: Listening on udev Control Socket. [Wed Oct 19 17:29:48 2022] EXT4-fs (sda2): re-mounted. Opts: (null) [Wed Oct 19 17:29:48 2022] systemd-journald[118]: Received request to flush runtime journal from PID 1 [Wed Oct 19 17:29:49 2022] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [Wed Oct 19 17:29:49 2022] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [Wed Oct 19 17:29:49 2022] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [Wed Oct 19 17:29:49 2022] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [Wed Oct 19 17:29:49 2022] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Wed Oct 19 17:29:49 2022] bcm2835_audio bcm2835_audio: card created with 4 channels [Wed Oct 19 17:29:49 2022] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Wed Oct 19 17:29:49 2022] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Wed Oct 19 17:29:49 2022] [vc_sm_connected_init]: start [Wed Oct 19 17:29:49 2022] vc_sm_cma_vchi_init: failed to open VCHI service (-1) [Wed Oct 19 17:29:49 2022] [vc_sm_connected_init]: failed to initialize shared memory service [Wed Oct 19 17:29:49 2022] bcm2835_audio bcm2835_audio: card created with 4 channels [Wed Oct 19 17:29:49 2022] mc: Linux media interface: v0.10 [Wed Oct 19 17:29:49 2022] videodev: Linux video capture interface: v2.00 [Wed Oct 19 17:29:49 2022] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Wed Oct 19 17:29:49 2022] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Wed Oct 19 17:29:49 2022] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Wed Oct 19 17:29:49 2022] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1) [Wed Oct 19 17:29:49 2022] bcm2835_codec: module is from the staging directory,the quality is unknown, you have been warned. [Wed Oct 19 17:29:49 2022] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1) [Wed Oct 19 17:29:49 2022] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1) [Wed Oct 19 17:29:49 2022] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device [Wed Oct 19 17:29:49 2022] usbcore: registered new interface driver cdc_acm [Wed Oct 19 17:29:49 2022] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [Wed Oct 19 17:29:49 2022] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3don minor 0 [Wed Oct 19 17:29:49 2022] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Wed Oct 19 17:29:49 2022] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Wed Oct 19 17:29:49 2022] checking generic (3eb5f000 465000) vs hw (0 ffffffffffffffff) [Wed Oct 19 17:29:49 2022] fb0: switching to vc4drmfb from simple [Wed Oct 19 17:29:49 2022] Console: switching to colour dummy device 80x30 [Wed Oct 19 17:29:49 2022] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [Wed Oct 19 17:29:49 2022] sd 0:0:0:0: Attached scsi generic sg0 type 0 [Wed Oct 19 17:29:49 2022] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor1 [Wed Oct 19 17:29:49 2022] brcmfmac: F1 signature read @0x18000000=0x15264345 [Wed Oct 19 17:29:49 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Wed Oct 19 17:29:49 2022] usbcore: registered new interface driver brcmfmac [Wed Oct 19 17:29:50 2022] Console: switching to colour frame buffer device 240x75 [Wed Oct 19 17:29:50 2022] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [Wed Oct 19 17:29:50 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Wed Oct 19 17:29:50 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Wed Oct 19 17:29:50 2022] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [Wed Oct 19 17:29:50 2022] random: crng init done [Wed Oct 19 17:29:50 2022] random: 7 urandom warning(s) missed due to ratelimiting [Wed Oct 19 17:29:52 2022] uart-pl011 fe201000.serial: no DMA platform data [Wed Oct 19 17:29:52 2022] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS [Wed Oct 19 17:29:52 2022] 8021q: 802.1Q VLAN Support v1.8 [Wed Oct 19 17:29:53 2022] bcmgenet fd580000.ethernet: configuring instance forexternal RGMII (RX delay) [Wed Oct 19 17:29:53 2022] bcmgenet fd580000.ethernet eth0: Link is Down [Wed Oct 19 17:29:59 2022] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [Wed Oct 19 17:29:59 2022] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Wed Oct 19 17:29:59 2022] Bluetooth: Core ver 2.22 [Wed Oct 19 17:29:59 2022] NET: Registered protocol family 31 [Wed Oct 19 17:29:59 2022] Bluetooth: HCI device and connection manager initialized [Wed Oct 19 17:29:59 2022] Bluetooth: HCI socket layer initialized [Wed Oct 19 17:29:59 2022] Bluetooth: L2CAP socket layer initialized [Wed Oct 19 17:29:59 2022] Bluetooth: SCO socket layer initialized [Wed Oct 19 17:29:59 2022] Bluetooth: HCI UART driver ver 2.3 [Wed Oct 19 17:29:59 2022] Bluetooth: HCI UART protocol H4 registered [Wed Oct 19 17:29:59 2022] Bluetooth: HCI UART protocol Three-wire (H5) registered [Wed Oct 19 17:29:59 2022] Bluetooth: HCI UART protocol Broadcom registered [Wed Oct 19 17:29:59 2022] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Wed Oct 19 17:29:59 2022] Bluetooth: BNEP filters: protocol multicast [Wed Oct 19 17:29:59 2022] Bluetooth: BNEP socket layer initialized [Wed Oct 19 17:30:14 2022] vcc-sd: disabling -
@planipes sagte in EXT4-fs error (device sda2) - Raspberry stürzt ab:
Überraschend ruhig. Ich hatte gedacht, da sei mehr los.
Hier hat sich das Dateisystem selber kuriert:[Wed Oct 19 17:29:45 2022] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [Wed Oct 19 17:29:45 2022] EXT4-fs (sda2): write access will be enabled during recovery [Wed Oct 19 17:29:45 2022] EXT4-fs (sda2): recovery complete [Wed Oct 19 17:29:45 2022] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Wed Oct 19 17:29:45 2022] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [...] [Wed Oct 19 17:29:48 2022] EXT4-fs (sda2): re-mounted. Opts: (null)Das funktioniert mal mehr, mal weniger gut.
-
Ist leider nachher wieder abgestürzt. Ich frage mich auch was es damit aufsich hat, dass ich die SSD nicht am USB3 laufen lassen kann. Der Raspberry startet eigentlich ordentlich nur habe ich das Gefühl, dass er keine IP Adresse vergibt und ich ihn so nicht ansteuern kann. Kann die SSD auch etwas haben? Sie ist noch keine 2 Jahre alt. Ich werde wohl also nicht drumherum kommen das System nochmal neu aufzusetzen.
Danke für die Hilfe
-
@planipes sagte in EXT4-fs error (device sda2) - Raspberry stürzt ab:
was es damit aufsich hat, dass ich die SSD nicht am USB3 laufen lassen kann
der Raspi 4 liefert von der CPU eibe hohe Störstrahlung, die sich mit der Frequenz des USB3 beisst.
-
Sorry für die späte Antwort - heißt das, dass man an einem Raspberry gar keine SSD auf USB 3 laufen lassen kann? - Starten tut es ja alle Dienste - nur vergibt der Raspberry anscheinend keine IP.
Nochmal zum eigentlich Thema: Ich habe die Befehle
sudo apt update sudo apt full-upgradeeingegeben. Ich dachte das hatte ich schonmal gemacht
- er läuft erst einmal. Ich werde euch berichten wie lange. Vielleicht komme ich ja um eine Neuinstallation herum.LG
-
@planipes sagte in EXT4-fs error (device sda2) - Raspberry stürzt ab:
heißt das, dass man an einem Raspberry gar keine SSD auf USB 3 laufen lassen kann?
Das ist jedenfalls eine wackelige Geschichte. Am besten einen USB-Hub mit Verlängerung und aktiver Stromversorgung an den Pi hängen.
nur vergibt der Raspberry anscheinend keine IP.
Das macht ja auch der DHCP-Server in deinem Netzwerk.
Ich dachte das hatte ich schonmal gemacht
Sein System hält man auch nicht 'schonmal' auf Stand sondern regelmäßig. So mindestens 1-2 mal im Monat.
