NEWS
SONOFF NSPanel mit Lovelace UI
SONOFF NSPanel mit Lovelace UI
Hardware
7.7k
Posts
271
Posters
6.7m
Views
253
Watching
-
@armilar nein, das stoppen kommt durch mein Eingreifen, weil er sonst in der Dauerschleife mit diesen beiden Zeilen ist. Das Display ist dabei auch in der Dauerschleife, deshalb habe ich es immer wieder händisch gestoppt.
Was mir noch so nebenher heute bei den vielen Flash-Versuchen durch den Kopf ging. Vielleicht gibt es durch die Updates der Scripte einen unsaubern Zugriff vom spezifischen "NSPanelTS.ts" Script auf das global hinterlegte ""TypeScript" ... dass es bspw. an der Namensgebung scheitert? Denn im Install-Video von Matthias wird das globale Script als "icon_mapping" angelegt, gemäß der aktuellen Doku jedoch mit dem Namen "IconsSelector". Wenn auf dieses Script im Code namentlich verwiesen wird, könnte daraus ein Verweis-Fehler entstehen?
Nein, das Script kannst du auch Schneewittchen nennen...
Globale Scripte legen sich vor jedes andere Common Script und somit sind die Funktionen eines globalen Scriptes in allen Scripten verfügbar...
Wie aktuell ist dein JS-Controller???
ansonsten mal komplett:
iob stop iob update iob upgrade self iob upgrade iob fix iob startdurchführen
-
Nein, das Script kannst du auch Schneewittchen nennen...
Globale Scripte legen sich vor jedes andere Common Script und somit sind die Funktionen eines globalen Scriptes in allen Scripten verfügbar...
Wie aktuell ist dein JS-Controller???
ansonsten mal komplett:
iob stop iob update iob upgrade self iob upgrade iob fix iob startdurchführen
@armilar Das hatte ich schon durchlaufen lassen (hatte ich in der Fehlerbehebungs-Doku vom Flashen gefunden). JS-Controller ist auf V6.0.11... also aktuell
Das Partitionierungs-Thema bei den Fehlerbehebungen würde sich darin äußern, dass sich das TFT nicht hätte flashen lassen? Oder kann es auch für das Konnektivitätsproblem sorgen?
-
@armilar Das hatte ich schon durchlaufen lassen (hatte ich in der Fehlerbehebungs-Doku vom Flashen gefunden). JS-Controller ist auf V6.0.11... also aktuell
Das Partitionierungs-Thema bei den Fehlerbehebungen würde sich darin äußern, dass sich das TFT nicht hätte flashen lassen? Oder kann es auch für das Konnektivitätsproblem sorgen?
-
@armilar
Da wird mehr ausgeworfen:javascript.0 17:50:48.946 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 javascript.0 17:50:48.946 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0 javascript.0 17:50:50.440 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Debug mode activated javascript.0 17:50:54.963 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GetNavigationString Übergabe pageId: 0 javascript.0 17:50:54.964 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Infos~~38060~Infos~mehr... javascript.0 17:50:54.964 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr... javascript.0 17:50:54.965 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr... javascript.0 17:50:54.965 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Icon role button ~button~3~~64332~Reboot NSPanel~Start javascript.0 17:50:54.966 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GeneratePageElements pageData entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:50:54.966 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: pageType~cardEntities javascript.0 17:50:54.967 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:50:54.967 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleMessage -> Startup javascript.0 17:50:55.072 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 javascript.0 17:50:55.072 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0 javascript.0 17:51:00.778 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GetNavigationString Übergabe pageId: 0 javascript.0 17:51:00.779 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Infos~~38060~Infos~mehr... javascript.0 17:51:00.780 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr... javascript.0 17:51:00.780 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr... javascript.0 17:51:00.781 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Icon role button ~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:00.781 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GeneratePageElements pageData entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:00.782 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: pageType~cardEntities javascript.0 17:51:00.782 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:00.783 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleMessage -> Startup javascript.0 17:51:00.888 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 javascript.0 17:51:00.888 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0 javascript.0 17:51:06.833 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GetNavigationString Übergabe pageId: 0 javascript.0 17:51:06.833 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Infos~~38060~Infos~mehr... javascript.0 17:51:06.834 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr... javascript.0 17:51:06.834 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr... javascript.0 17:51:06.834 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Icon role button ~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:06.834 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GeneratePageElements pageData entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:06.835 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: pageType~cardEntities javascript.0 17:51:06.835 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:06.835 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleMessage -> Startup javascript.0 17:51:06.934 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 javascript.0 17:51:06.934 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0 javascript.0 17:51:12.770 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GetNavigationString Übergabe pageId: 0 javascript.0 17:51:12.771 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Infos~~38060~Infos~mehr... javascript.0 17:51:12.772 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr... javascript.0 17:51:12.772 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr... javascript.0 17:51:12.773 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Icon role button ~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:12.773 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GeneratePageElements pageData entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:12.773 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: pageType~cardEntities javascript.0 17:51:12.774 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:12.774 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleMessage -> Startup javascript.0 17:51:12.884 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 javascript.0 17:51:12.885 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0 javascript.0 17:51:18.678 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GetNavigationString Übergabe pageId: 0 javascript.0 17:51:18.679 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Infos~~38060~Infos~mehr... javascript.0 17:51:18.679 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr... javascript.0 17:51:18.680 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Standard ~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr... javascript.0 17:51:18.680 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: CreateEntity Icon role button ~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:18.680 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: GeneratePageElements pageData entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:18.681 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: pageType~cardEntities javascript.0 17:51:18.681 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: function SendToPanel payload: entityUpd~Service Menü~button~bPrev~~65535~~~button~bNext~~65535~~~button~navigate.NSPanel_Infos~~38060~Infos~mehr...~button~navigate.NSPanel_Einstellungen~~38060~Einstellungen~mehr...~button~navigate.NSPanel_Firmware~~38060~Firmware~mehr...~button~3~~64332~Reboot NSPanel~Start javascript.0 17:51:18.682 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleMessage -> Startup javascript.0 17:51:18.792 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 javascript.0 17:51:18.792 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0 -
@armilar Das hatte ich schon durchlaufen lassen (hatte ich in der Fehlerbehebungs-Doku vom Flashen gefunden). JS-Controller ist auf V6.0.11... also aktuell
Das Partitionierungs-Thema bei den Fehlerbehebungen würde sich darin äußern, dass sich das TFT nicht hätte flashen lassen? Oder kann es auch für das Konnektivitätsproblem sorgen?
@kerschte_de sagte in SONOFF NSPanel mit Lovelace UI:
Das Partitionierungs-Thema bei den Fehlerbehebungen würde sich darin äußern, dass sich das TFT nicht hätte flashen lassen? Oder kann es auch für das Konnektivitätsproblem sorgen?
Es sei denn der Berry-Driver ist nicht sauber installiert...
Da das Panel auf "Waiting for Content" steht und die Daten über den CustomSend über den BerryDriver in das Display gelangen, wäre das noch eine Option...
Lösche nochmal "alle" Files (Feuersymbol) aus dem
Dann in die Konsole und folgendes ausführen:
Backlog UrlFetch https://raw.githubusercontent.com/joBr99/nspanel-lovelace-ui/main/tasmota/autoexec.be; SetOption151 0;Restart 1Diese Option installiert den Berry automatisch.
-
@kerschte_de sagte in SONOFF NSPanel mit Lovelace UI:
Das Partitionierungs-Thema bei den Fehlerbehebungen würde sich darin äußern, dass sich das TFT nicht hätte flashen lassen? Oder kann es auch für das Konnektivitätsproblem sorgen?
Es sei denn der Berry-Driver ist nicht sauber installiert...
Da das Panel auf "Waiting for Content" steht und die Daten über den CustomSend über den BerryDriver in das Display gelangen, wäre das noch eine Option...
Lösche nochmal "alle" Files (Feuersymbol) aus dem
Dann in die Konsole und folgendes ausführen:
Backlog UrlFetch https://raw.githubusercontent.com/joBr99/nspanel-lovelace-ui/main/tasmota/autoexec.be; SetOption151 0;Restart 1Diese Option installiert den Berry automatisch.
@armilar ... getan. Hier der Auszug aus der console:
00:00:00.001 HDW: ESP32-D0WD-V3 v3.0 00:00:00.064 UFS: FlashFS mounted with 288 kB free 00:00:00.102 CFG: Loaded from File, Count 245 00:00:00.113 QPC: Count 1 00:00:00.168 BRY: Berry initialized, RAM used 3904 bytes 00:00:00.182 Project tasmota - Tasmota Version 14.1.0(release-nspanel)-3_0_0(2024-06-03T11:56:09) 00:00:00.348 NXP: Initializing Driver 00:00:00.351 BRY: Successfully loaded 'autoexec.be' 00:00:00.357 NXP: Screen Initialized 00:00:00.468 RSL: RESULT = {"CustomRecv":"event,startup,53,eu"} 00:00:01.000 WIF: Connecting to AP1 GlasRepThiel Channel 1 BSSId 74:42:7F:B9:EC:1B in mode HT20 as NSPanel-85C180-0384... 00:00:03.483 WIF: Connected 00:00:03.738 HTP: Web server active on NSPanel-85C180-0384 with IP address 192.168.188.230 17:57:39.734 MQT: Attempting connection... 17:57:39.753 MQT: Connected 17:57:39.755 MQT: RagowSmartHome/NSPanel_85C180/tele/LWT = Online (retained) 17:57:39.757 MQT: RagowSmartHome/NSPanel_85C180/cmnd/POWER = 17:57:39.761 MQT: RagowSmartHome/NSPanel_85C180/tele/INFO1 = {"Info1":{"Module":"NSPanel","Version":"14.1.0(release-nspanel)","FallbackTopic":"cmnd/DVES_85C180_fb/","GroupTopic":"RagowSmartHome/tasmotas/cmnd/"}} 17:57:39.785 MQT: RagowSmartHome/NSPanel_85C180/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"NSPanel-85C180-0384","IPAddress":"192.168.188.230","IP6Global":"","IP6Local":"fe80::3ee9:eff:fe85:c180%st1"}} 17:57:39.797 MQT: RagowSmartHome/NSPanel_85C180/tele/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":80}} 17:57:39.810 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"POWER1":"OFF"} 17:57:39.822 MQT: RagowSmartHome/NSPanel_85C180/stat/POWER1 = OFF 17:57:39.823 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"POWER2":"OFF"} 17:57:39.835 MQT: RagowSmartHome/NSPanel_85C180/stat/POWER2 = OFF 17:57:39.890 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"Command":"Unknown"} 17:57:39.943 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"CustomSend":"Done"} 17:57:41.139 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:57:42.871 QPC: Reset 17:57:43.868 MQT: RagowSmartHome/NSPanel_85C180/tele/STATE = {"Time":"2024-09-05T17:57:43","Uptime":"0T00:00:08","UptimeSec":8,"Heap":133,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":200,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":213},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GlasRepThiel","BSSId":"74:42:7F:B9:EC:1B","Channel":1,"Mode":"HT20","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:03"}} 17:57:43.905 MQT: RagowSmartHome/NSPanel_85C180/tele/SENSOR = {"Time":"2024-09-05T17:57:43","ANALOG":{"Temperature1":29.3},"ESP32":{"Temperature":53.9},"TempUnit":"C"} 17:57:47.121 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:57:53.521 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:57:59.422 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:05.421 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:11.321 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:17.320 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:23.321 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:29.222 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:35.221 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"}Danach reboot des Displays. Leider kreiselt es weiter.
Mir fällt noch ein. Der Beispiel-Datensatz für das Template habe ich aufgrund der vielen Versuche noch aus der englischen Anleitung übernommen. Der weicht ja etwas ggü der deutschen Anleitung ab:
englische Anleitung:
{"NAME":"NSPanel","GPIO":[0,0,0,0,3872,0,0,0,0,0,32,0,0,0,0,225,0,480,224,1,0,0,0,33,0,0,0,0,0,0,0,0,0,0,4736,0],"FLAG":0,"BASE":1,"CMND":"ADCParam 2,11200,10000,3950 | Sleep 0 | BuzzerPWM 1"}deutsche Anleitung:
{"NAME":"NSPanel","GPIO":[0,0,0,0,3872,0,0,0,0,0,32,0,0,0,0,225,0,480,224,1,0,0,0,33,0,0,0,0,0,0,0,0,0,0,4736,0],"FLAG":0,"BASE":1}Ist bei mir gerade "stochern im Nebel" --> tut mir leid
-
@armilar ... getan. Hier der Auszug aus der console:
00:00:00.001 HDW: ESP32-D0WD-V3 v3.0 00:00:00.064 UFS: FlashFS mounted with 288 kB free 00:00:00.102 CFG: Loaded from File, Count 245 00:00:00.113 QPC: Count 1 00:00:00.168 BRY: Berry initialized, RAM used 3904 bytes 00:00:00.182 Project tasmota - Tasmota Version 14.1.0(release-nspanel)-3_0_0(2024-06-03T11:56:09) 00:00:00.348 NXP: Initializing Driver 00:00:00.351 BRY: Successfully loaded 'autoexec.be' 00:00:00.357 NXP: Screen Initialized 00:00:00.468 RSL: RESULT = {"CustomRecv":"event,startup,53,eu"} 00:00:01.000 WIF: Connecting to AP1 GlasRepThiel Channel 1 BSSId 74:42:7F:B9:EC:1B in mode HT20 as NSPanel-85C180-0384... 00:00:03.483 WIF: Connected 00:00:03.738 HTP: Web server active on NSPanel-85C180-0384 with IP address 192.168.188.230 17:57:39.734 MQT: Attempting connection... 17:57:39.753 MQT: Connected 17:57:39.755 MQT: RagowSmartHome/NSPanel_85C180/tele/LWT = Online (retained) 17:57:39.757 MQT: RagowSmartHome/NSPanel_85C180/cmnd/POWER = 17:57:39.761 MQT: RagowSmartHome/NSPanel_85C180/tele/INFO1 = {"Info1":{"Module":"NSPanel","Version":"14.1.0(release-nspanel)","FallbackTopic":"cmnd/DVES_85C180_fb/","GroupTopic":"RagowSmartHome/tasmotas/cmnd/"}} 17:57:39.785 MQT: RagowSmartHome/NSPanel_85C180/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"NSPanel-85C180-0384","IPAddress":"192.168.188.230","IP6Global":"","IP6Local":"fe80::3ee9:eff:fe85:c180%st1"}} 17:57:39.797 MQT: RagowSmartHome/NSPanel_85C180/tele/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":80}} 17:57:39.810 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"POWER1":"OFF"} 17:57:39.822 MQT: RagowSmartHome/NSPanel_85C180/stat/POWER1 = OFF 17:57:39.823 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"POWER2":"OFF"} 17:57:39.835 MQT: RagowSmartHome/NSPanel_85C180/stat/POWER2 = OFF 17:57:39.890 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"Command":"Unknown"} 17:57:39.943 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"CustomSend":"Done"} 17:57:41.139 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:57:42.871 QPC: Reset 17:57:43.868 MQT: RagowSmartHome/NSPanel_85C180/tele/STATE = {"Time":"2024-09-05T17:57:43","Uptime":"0T00:00:08","UptimeSec":8,"Heap":133,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":200,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":213},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GlasRepThiel","BSSId":"74:42:7F:B9:EC:1B","Channel":1,"Mode":"HT20","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:03"}} 17:57:43.905 MQT: RagowSmartHome/NSPanel_85C180/tele/SENSOR = {"Time":"2024-09-05T17:57:43","ANALOG":{"Temperature1":29.3},"ESP32":{"Temperature":53.9},"TempUnit":"C"} 17:57:47.121 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:57:53.521 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:57:59.422 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:05.421 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:11.321 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:17.320 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:23.321 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:29.222 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 17:58:35.221 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"}Danach reboot des Displays. Leider kreiselt es weiter.
Mir fällt noch ein. Der Beispiel-Datensatz für das Template habe ich aufgrund der vielen Versuche noch aus der englischen Anleitung übernommen. Der weicht ja etwas ggü der deutschen Anleitung ab:
englische Anleitung:
{"NAME":"NSPanel","GPIO":[0,0,0,0,3872,0,0,0,0,0,32,0,0,0,0,225,0,480,224,1,0,0,0,33,0,0,0,0,0,0,0,0,0,0,4736,0],"FLAG":0,"BASE":1,"CMND":"ADCParam 2,11200,10000,3950 | Sleep 0 | BuzzerPWM 1"}deutsche Anleitung:
{"NAME":"NSPanel","GPIO":[0,0,0,0,3872,0,0,0,0,0,32,0,0,0,0,225,0,480,224,1,0,0,0,33,0,0,0,0,0,0,0,0,0,0,4736,0],"FLAG":0,"BASE":1}Ist bei mir gerade "stochern im Nebel" --> tut mir leid
@kerschte_de sagte in SONOFF NSPanel mit Lovelace UI:
event,startup,53,eu
Was passiert, wenn du in der Console
CustomSend time~18:00eingibst
-
@kerschte_de sagte in SONOFF NSPanel mit Lovelace UI:
event,startup,53,eu
Was passiert, wenn du in der Console
CustomSend time~18:00eingibst
@armilar said in SONOFF NSPanel mit Lovelace UI:
CustomSend time~18:00
Dann wird in der console so darauf reagiert:
18:04:19.608 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 18:04:25.508 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 18:04:31.508 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 18:04:35.939 MQT: RagowSmartHome/NSPanel_85C180/tele/STATE = {"Time":"2024-09-05T18:04:35","Uptime":"0T00:05:09","UptimeSec":309,"Heap":126,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":526,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":213},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GlasRepThiel","BSSId":"74:42:7F:B9:EC:1B","Channel":1,"Mode":"HT20","RSSI":100,"Signal":-42,"LinkCount":1,"Downtime":"0T00:00:04"}} 18:04:35.977 MQT: RagowSmartHome/NSPanel_85C180/tele/SENSOR = {"Time":"2024-09-05T18:04:35","ANALOG":{"Temperature1":29.3},"ESP32":{"Temperature":54.4},"TempUnit":"C"} 18:04:37.408 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 18:04:43.408 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 18:04:47.058 CMD: CustomSend time~18:00 18:04:47.069 MQT: RagowSmartHome/NSPanel_85C180/stat/RESULT = {"CustomSend":"Done"} 18:04:49.408 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} 18:04:55.308 MQT: RagowSmartHome/NSPanel_85C180/tele/RESULT = {"CustomRecv":"event,startup,53,eu"} -
@kerschte_de Ich habe das Script noch einmal gestartet und die Meldungen direkt aus dem Logging kopiert:
5.9.2024, 17:08:51.013 [info ]: javascript.0 (3861) Compiling TypeScript source script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1 5.9.2024, 17:08:53.057 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: source code did not change, using cached compilation result... 5.9.2024, 17:08:53.316 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.323 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.329 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.334 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.339 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.344 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.350 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.355 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.361 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.368 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.374 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.386 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.396 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.402 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.406 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.410 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.415 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.420 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.424 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.428 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.433 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.438 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.442 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.447 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.453 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.458 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.463 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.468 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.473 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.477 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.482 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.486 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.490 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.495 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.500 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.504 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.508 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.512 [error]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Error: Cannot find module 'dayjs' 5.9.2024, 17:08:53.525 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: setObjects enabled - create Alias Channels possible 5.9.2024, 17:08:53.544 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: weather alias for accuweather.0. already exists 5.9.2024, 17:08:53.692 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: registered 32 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 5.9.2024, 17:08:54.349 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 5.9.2024, 17:08:54.349 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0 5.9.2024, 17:08:54.468 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Debug mode disabled 5.9.2024, 17:08:55.595 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 5.9.2024, 17:08:55.596 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0 5.9.2024, 17:08:58.016 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Start MQTT-Port-Check ------------------------------------- 5.9.2024, 17:08:58.016 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: -- admin.0 - 8081 5.9.2024, 17:08:58.016 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: -- influxdb.0 - 8086 5.9.2024, 17:08:58.017 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: -- mqtt-client.0 - 1883 5.9.2024, 17:08:58.017 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: -- zigbee.0 - /dev 5.9.2024, 17:08:58.017 [warn ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Object "system.adapter.undefined" does not exist 5.9.2024, 17:08:58.017 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: End MQTT-Port-Check --------------------------------------- 5.9.2024, 17:09:01.783 [info ]: javascript.0 (3861) Stopping script script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1 5.9.2024, 17:09:02.051 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Desired TFT Firmware: 53 / v4.4.0 5.9.2024, 17:09:02.052 [info ]: javascript.0 (3861) script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Installed TFT Firmware: 53 / v4.4.0Das ist das Logging direkt im ioB Skript-Adapter (unter dem Fenster mit dem Script-Inhalt)
--> ah, und es sei noch erwähnt, dass ich nochmal Tasmota auf dem ESP32 auf 14.1.0 geupdatet habe ... nachdem der Flash geklappt hatte (siehe gestrigen Post)
Welche Daten kommen bei
Mqtt-Client……Tele.Result an.Gruß Tom
https://github.com/tt-tom17
Wenn meine Hilfe erfolgreich war, benutze bitte das Voting unten rechts im BeitragNSPanel Script Wiki
https://github.com/joBr99/nspanel-lovelace-ui/wikiNSPanel Adapter Wiki
https://github.com/ticaki/ioBroker.nspanel-lovelace-ui/wiki -
Welche Daten kommen bei
Mqtt-Client……Tele.Result an.Wahrscheinlich nur
event,startup,53,euDer CustomSend funktioniert nicht. Könnte man evtl. mal vom mqtt-client.0 auf den mqtt.0 umsteigen?
-
Wahrscheinlich nur
event,startup,53,euDer CustomSend funktioniert nicht. Könnte man evtl. mal vom mqtt-client.0 auf den mqtt.0 umsteigen?
@armilar genau das passiert. Die Eingabe kommt nicht an.
-
zeige mal die Objektdaten vom Alias Temperaturen und die Daten vom Datenpunkt Actual
Hier die Daten der beiden Datenpunkte:
0^17:00+60+120+180+240^21:00+300+360+420+480^01:00+540+600+660+720^05:00+780+840+900+960^09:00+1020+1080+1140+1200^13:00+1260+1320+1380~0:262~21:259~62:250~103:243~144:235~185:230~226:231~267:235~309:237~391:236~473:234~597:232~679:232~802:232~843:237~885:243~967:246~1008:246~1090:249~1214:252~1337:254~1419:255Aber die Seite müsste doch angezeigt werden, oder?
-
@armilar genau das passiert. Die Eingabe kommt nicht an.
Zeige mal bitte alle Einstellungen von der mqtt Instanz.
-
Zeige mal bitte alle Einstellungen von der mqtt Instanz.
Ich habe den Client jedoch schon gelöscht und richte gerade den Broker/Client-Adapter als Client ein. Ziel: Instanz soll mqtt.0 werden.
-
Ich habe den Client jedoch schon gelöscht und richte gerade den Broker/Client-Adapter als Client ein. Ziel: Instanz soll mqtt.0 werden.
@kerschte_de
Okay so läuft es bei mir auch. -
Hier die Daten der beiden Datenpunkte:
0^17:00+60+120+180+240^21:00+300+360+420+480^01:00+540+600+660+720^05:00+780+840+900+960^09:00+1020+1080+1140+1200^13:00+1260+1320+1380~0:262~21:259~62:250~103:243~144:235~185:230~226:231~267:235~309:237~391:236~473:234~597:232~679:232~802:232~843:237~885:243~967:246~1008:246~1090:249~1214:252~1337:254~1419:255Aber die Seite müsste doch angezeigt werden, oder?
-
@kerschte_de
Okay so läuft es bei mir auch.Das Script habe ich nun angepasst und MQTT läuft wieder auf dem ioB.
javascript.0 2024-09-05 18:31:20.888 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false ~17299~ javascript.0 2024-09-05 18:31:20.887 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:20.887 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false javascript.0 2024-09-05 18:31:20.887 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:20.886 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleScreensaverUpdate payload: weatherUpdate~~~~65504~~29.8 °C~~~~65363~Sonne~06:24~~~~34351~Wind~6.1m/s~~~~34351~Böen~9.0m/s~~~~65535~Windr.~O~ javascript.0 2024-09-05 18:31:20.886 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: moments.js --> Datum O valid?: false javascript.0 2024-09-05 18:31:20.866 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: moments.js --> Datum 2024-09-05T06:24:00+02:00 valid?: true javascript.0 2024-09-05 18:31:04.386 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: renderCurrentPage javascript.0 2024-09-05 18:31:04.151 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleMessage -> sleepReached javascript.0 2024-09-05 18:31:04.151 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false ~17299~ javascript.0 2024-09-05 18:31:04.150 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:04.150 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false javascript.0 2024-09-05 18:31:04.150 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:04.149 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false ~17299~ javascript.0 2024-09-05 18:31:04.149 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:04.149 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false javascript.0 2024-09-05 18:31:04.149 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:04.147 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleScreensaverUpdate payload: weatherUpdate~~~~65504~~29.8 °C~~~~63878~Do~15° 33°~~~~65504~Fr~14° 30°~~~~38066~Sa~17° 32°~~~~65504~So~17° 32°~ javascript.0 2024-09-05 18:30:55.808 error script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: AxiosError: getaddrinfo ENOTFOUND undefined at Function.AxiosError.from (file:///opt/iobroker/node_modules/@iobroker-javascript.0/axios/lib/core/AxiosError.js:92:14) at RedirectableRequest.handleRequestError (file:///opt/iobroker/node_modules/@iobroker-javascript.0/axios/lib/adapters/http.js:620:25) at RedirectableRequest.emit (node:events:519:28) at RedirectableRequest.emit (node:domain:488:12) at ClientRequest.eventHandlers.<computed> (/opt/iobroker/node_modules/follow-redirects/index.js:38:24) at ClientRequest.emit (node:events:531:35) at ClientRequest.emit (node:domain:488:12) at emitErrorEvent (node:_http_client:108:11) at Socket.socketErrorListener (node:_http_client:511:5) at Socket.emit (node:events:519:28) at Axios.request (file:///opt/iobroker/node_modules/@iobroker-javascript.0/axios/lib/core/Axios.js:45:41) at processTicksAndRejections (node:internal/process/task_queues:95:5) { hostname: 'undefined', syscall: 'getaddrinfo', code: 'ENOTFOUND', errno: -3008, config: { transitional: { silentJSONParsing: true, forcedJSONParsing: true, clarifyTimeoutError: false }, adapter: [ 'xhr', 'http', 'fetch' ], transformRequest: [ [Function: transformRequest] ], transformResponse: [ [Function: transformResponse] ], timeout: 0, xsrfCookieName: 'XSRF-TOKEN', xsrfHeaderName: 'X-XSRF-TOKEN', maxContentLength: -1, maxBodyLength: -1, env: { FormData: [Function], Blob: [class Blob] }, validateStatus: [Function: validateStatus], headers: Object [AxiosHeaders] { Accept: 'application/json, text/plain, */*', 'Content-Type': undefined, 'User-Agent': 'ioBroker', 'Accept-Encoding': 'gzip, compress, deflate, br' }, method: 'get', url: 'http://undefined/cm?cmnd=Status0', data: undefined }, request: <ref *1> Writable { _events: { close: undefined, error: [Function: handleRequestError], prefinish: undefined, finish: undefined, drain: undefined, response: [Function: handleResponse], socket: [Function: handleRequestSocket] }, _writableState: WritableState { highWaterMark: 16384, length: 0, corked: 0, onwrite: [Function: bound onwrite], writelen: 0, bufferedIndex: 0, pendingcb: 0, [Symbol(kState)]: 17580812, [Symbol(kBufferedValue)]: null }, _maxListeners: 100, _options: { maxRedirects: 21, maxBodyLength: Infinity, protocol: 'http:', path: '/cm?cmnd=Status0', method: 'GET', headers: [Object: null prototype], agents: [Object], auth: undefined, family: undefined, beforeRedirect: [Function: dispatchBeforeRedirect], beforeRedirects: [Object], hostname: 'undefined', port: '', agent: undefined, nativeProtocols: [Object], pathname: '/cm', search: '?cmnd=Status0' }, _ended: true, _ending: true, _redirectCount: 0, _redirects: [], _requestBodyLength: 0, _requestBodyBuffers: [], _eventsCount: 3, _onNativeResponse: [Function (anonymous)], _currentRequest: ClientRequest { _events: [Object: null prototype], _eventsCount: 7, _maxListeners: 100, outputData: [], outputSize: 0, writable: true, destroyed: false, _last: true, chunkedEncoding: false, shouldKeepAlive: true, maxRequestsOnConnectionReached: false, _defaultKeepAlive: true, useChunkedEncodingByDefault: false, sendDate: false, _removedConnection: false, _removedContLen: false, _removedTE: false, strictContentLength: false, _contentLength: 0, _hasBody: true, _trailer: '', finished: true, _headerSent: true, _closed: false, socket: [Socket], _header: 'GET /cm?cmnd=Status0 HTTP/1.1\r\n' + 'Accept: application/json, text/plain, */*\r\n' + 'User-Agent: ioBroker\r\n' + 'Accept-Encoding: gzip, compress, deflate, br\r\n' + 'sentry-trace: 0ab3228bdcbf4434805cb5f56bb6a367-b33093e5bdb0da64\r\n' + 'baggage: sentry-environment=production,sentry-release=iobroker.javascript%408.7.6,sentry-public_key=f3b9740caaee4ee69eb68019d71526ff,sentry-trace_id=0ab3228bdcbf4434805cb5f56bb6a367\r\n' + 'Host: undefined\r\n' + 'Connection: keep-alive\r\n' + '\r\n', _keepAliveTimeout: 0, _onPendingData: [Function: nop], agent: [Agent], socketPath: undefined, method: 'GET', maxHeaderSize: undefined, insecureHTTPParser: undefined, joinDuplicateHeaders: undefined, path: '/cm?cmnd=Status0', _ended: false, res: null, aborted: false, timeoutCb: [Function: emitRequestTimeout], upgradeOrConnect: false, parser: null, maxHeadersCount: null, reusedSocket: false, host: 'undefined', protocol: 'http:', _redirectable: [Circular *1], [Symbol(shapeMode)]: false, [Symbol(kCapture)]: false, [Symbol(kBytesWritten)]: 0, [Symbol(kNeedDrain)]: false, [Symbol(corked)]: 0, [Symbol(kOutHeaders)]: [Object: null prototype], [Symbol(errored)]: null, [Symbol(kHighWaterMark)]: 16384, [Symbol(kRejectNonStandardBodyWrites)]: false, [Symbol(kUniqueHeaders)]: null }, _currentUrl: 'http://undefined/cm?cmnd=Status0', [Symbol(shapeMode)]: true, [Symbol(kCapture)]: false }, cause: Error: getaddrinfo ENOTFOUND undefined at GetAddrInfoReqWrap.onlookupall [as oncomplete] (node:dns:120:26) { errno: -3008, code: 'ENOTFOUND', syscall: 'getaddrinfo', hostname: 'undefined' }} javascript.0 2024-09-05 18:30:54.117 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: renderCurrentPage javascript.0 2024-09-05 18:30:53.858 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: renderCurrentPage javascript.0 2024-09-05 18:30:53.231 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: online tasmota firmware version => 14.2.0 javascript.0 2024-09-05 18:30:53.230 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: online tasmota firmware version => 14.2.0 javascript.0 2024-09-05 18:30:53.226 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: renderCurrentPage--> Das Display ist ERWACHT !!! <--
-
Das Script habe ich nun angepasst und MQTT läuft wieder auf dem ioB.
javascript.0 2024-09-05 18:31:20.888 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false ~17299~ javascript.0 2024-09-05 18:31:20.887 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:20.887 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false javascript.0 2024-09-05 18:31:20.887 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:20.886 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleScreensaverUpdate payload: weatherUpdate~~~~65504~~29.8 °C~~~~65363~Sonne~06:24~~~~34351~Wind~6.1m/s~~~~34351~Böen~9.0m/s~~~~65535~Windr.~O~ javascript.0 2024-09-05 18:31:20.886 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: moments.js --> Datum O valid?: false javascript.0 2024-09-05 18:31:20.866 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: moments.js --> Datum 2024-09-05T06:24:00+02:00 valid?: true javascript.0 2024-09-05 18:31:04.386 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: renderCurrentPage javascript.0 2024-09-05 18:31:04.151 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleMessage -> sleepReached javascript.0 2024-09-05 18:31:04.151 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false ~17299~ javascript.0 2024-09-05 18:31:04.150 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:04.150 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false javascript.0 2024-09-05 18:31:04.150 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:04.149 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false ~17299~ javascript.0 2024-09-05 18:31:04.149 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:04.149 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Icon1 else false javascript.0 2024-09-05 18:31:04.149 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: Entity ist kein String javascript.0 2024-09-05 18:31:04.147 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: HandleScreensaverUpdate payload: weatherUpdate~~~~65504~~29.8 °C~~~~63878~Do~15° 33°~~~~65504~Fr~14° 30°~~~~38066~Sa~17° 32°~~~~65504~So~17° 32°~ javascript.0 2024-09-05 18:30:55.808 error script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: AxiosError: getaddrinfo ENOTFOUND undefined at Function.AxiosError.from (file:///opt/iobroker/node_modules/@iobroker-javascript.0/axios/lib/core/AxiosError.js:92:14) at RedirectableRequest.handleRequestError (file:///opt/iobroker/node_modules/@iobroker-javascript.0/axios/lib/adapters/http.js:620:25) at RedirectableRequest.emit (node:events:519:28) at RedirectableRequest.emit (node:domain:488:12) at ClientRequest.eventHandlers.<computed> (/opt/iobroker/node_modules/follow-redirects/index.js:38:24) at ClientRequest.emit (node:events:531:35) at ClientRequest.emit (node:domain:488:12) at emitErrorEvent (node:_http_client:108:11) at Socket.socketErrorListener (node:_http_client:511:5) at Socket.emit (node:events:519:28) at Axios.request (file:///opt/iobroker/node_modules/@iobroker-javascript.0/axios/lib/core/Axios.js:45:41) at processTicksAndRejections (node:internal/process/task_queues:95:5) { hostname: 'undefined', syscall: 'getaddrinfo', code: 'ENOTFOUND', errno: -3008, config: { transitional: { silentJSONParsing: true, forcedJSONParsing: true, clarifyTimeoutError: false }, adapter: [ 'xhr', 'http', 'fetch' ], transformRequest: [ [Function: transformRequest] ], transformResponse: [ [Function: transformResponse] ], timeout: 0, xsrfCookieName: 'XSRF-TOKEN', xsrfHeaderName: 'X-XSRF-TOKEN', maxContentLength: -1, maxBodyLength: -1, env: { FormData: [Function], Blob: [class Blob] }, validateStatus: [Function: validateStatus], headers: Object [AxiosHeaders] { Accept: 'application/json, text/plain, */*', 'Content-Type': undefined, 'User-Agent': 'ioBroker', 'Accept-Encoding': 'gzip, compress, deflate, br' }, method: 'get', url: 'http://undefined/cm?cmnd=Status0', data: undefined }, request: <ref *1> Writable { _events: { close: undefined, error: [Function: handleRequestError], prefinish: undefined, finish: undefined, drain: undefined, response: [Function: handleResponse], socket: [Function: handleRequestSocket] }, _writableState: WritableState { highWaterMark: 16384, length: 0, corked: 0, onwrite: [Function: bound onwrite], writelen: 0, bufferedIndex: 0, pendingcb: 0, [Symbol(kState)]: 17580812, [Symbol(kBufferedValue)]: null }, _maxListeners: 100, _options: { maxRedirects: 21, maxBodyLength: Infinity, protocol: 'http:', path: '/cm?cmnd=Status0', method: 'GET', headers: [Object: null prototype], agents: [Object], auth: undefined, family: undefined, beforeRedirect: [Function: dispatchBeforeRedirect], beforeRedirects: [Object], hostname: 'undefined', port: '', agent: undefined, nativeProtocols: [Object], pathname: '/cm', search: '?cmnd=Status0' }, _ended: true, _ending: true, _redirectCount: 0, _redirects: [], _requestBodyLength: 0, _requestBodyBuffers: [], _eventsCount: 3, _onNativeResponse: [Function (anonymous)], _currentRequest: ClientRequest { _events: [Object: null prototype], _eventsCount: 7, _maxListeners: 100, outputData: [], outputSize: 0, writable: true, destroyed: false, _last: true, chunkedEncoding: false, shouldKeepAlive: true, maxRequestsOnConnectionReached: false, _defaultKeepAlive: true, useChunkedEncodingByDefault: false, sendDate: false, _removedConnection: false, _removedContLen: false, _removedTE: false, strictContentLength: false, _contentLength: 0, _hasBody: true, _trailer: '', finished: true, _headerSent: true, _closed: false, socket: [Socket], _header: 'GET /cm?cmnd=Status0 HTTP/1.1\r\n' + 'Accept: application/json, text/plain, */*\r\n' + 'User-Agent: ioBroker\r\n' + 'Accept-Encoding: gzip, compress, deflate, br\r\n' + 'sentry-trace: 0ab3228bdcbf4434805cb5f56bb6a367-b33093e5bdb0da64\r\n' + 'baggage: sentry-environment=production,sentry-release=iobroker.javascript%408.7.6,sentry-public_key=f3b9740caaee4ee69eb68019d71526ff,sentry-trace_id=0ab3228bdcbf4434805cb5f56bb6a367\r\n' + 'Host: undefined\r\n' + 'Connection: keep-alive\r\n' + '\r\n', _keepAliveTimeout: 0, _onPendingData: [Function: nop], agent: [Agent], socketPath: undefined, method: 'GET', maxHeaderSize: undefined, insecureHTTPParser: undefined, joinDuplicateHeaders: undefined, path: '/cm?cmnd=Status0', _ended: false, res: null, aborted: false, timeoutCb: [Function: emitRequestTimeout], upgradeOrConnect: false, parser: null, maxHeadersCount: null, reusedSocket: false, host: 'undefined', protocol: 'http:', _redirectable: [Circular *1], [Symbol(shapeMode)]: false, [Symbol(kCapture)]: false, [Symbol(kBytesWritten)]: 0, [Symbol(kNeedDrain)]: false, [Symbol(corked)]: 0, [Symbol(kOutHeaders)]: [Object: null prototype], [Symbol(errored)]: null, [Symbol(kHighWaterMark)]: 16384, [Symbol(kRejectNonStandardBodyWrites)]: false, [Symbol(kUniqueHeaders)]: null }, _currentUrl: 'http://undefined/cm?cmnd=Status0', [Symbol(shapeMode)]: true, [Symbol(kCapture)]: false }, cause: Error: getaddrinfo ENOTFOUND undefined at GetAddrInfoReqWrap.onlookupall [as oncomplete] (node:dns:120:26) { errno: -3008, code: 'ENOTFOUND', syscall: 'getaddrinfo', hostname: 'undefined' }} javascript.0 2024-09-05 18:30:54.117 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: renderCurrentPage javascript.0 2024-09-05 18:30:53.858 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: renderCurrentPage javascript.0 2024-09-05 18:30:53.231 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: online tasmota firmware version => 14.2.0 javascript.0 2024-09-05 18:30:53.230 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: online tasmota firmware version => 14.2.0 javascript.0 2024-09-05 18:30:53.226 info script.js.common.NSPanel.NSPANEL_WZ_4_4_0_1: renderCurrentPage--> Das Display ist ERWACHT !!! <--
@kerschte_de
Na dann kann es ja weiter gehen, viel Spaß noch. -
@kerschte_de
Na dann kann es ja weiter gehen, viel Spaß noch. -
Ist ganz normaler Auslieferungszustand ohne SetOption x
Das heißt SetOption73 und SetOption114 sind auch aus. Was Du auch in der Tasmota-Konsole eingestellt hast, mach es rückgängig und du hörst die Relais auch schalten…
@armilar said in SONOFF NSPanel mit Lovelace UI:
@lustig29
Ist ganz normaler Auslieferungszustand ohne SetOption x
Das heißt SetOption73 und SetOption114 sind auch aus. Was Du auch in der Tasmota-Konsole eingestellt hast, mach es rückgängig und du hörst die Relais auch schalten…Wie genau mache ich das rückgängig?
Über den userdata_Datenpunkt kann ich die Relais an und aus schalten. Per Taste am Gerät passiert aber nichts.
Support us
363
Online32.4k
Users81.3k
Topics1.3m
Posts