Z-Wave Adapter

AlCalzone

Habe beim Versuch, den neuen zwave-Adapter zu installieren, wieder das Problem, das ich beim ersten Mal hatte - mit dem Unterschied, dass ich jetzt nicht mehr weiß, wie ich es damals gelöst hab:

gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/0.10.22"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared/.node-gyp"
gyp http GET http://nodejs.org/dist/v0.10.22/node-v0.10.22.tar.gz
gyp http 200 http://nodejs.org/dist/v0.10.22/node-v0.10.22.tar.gz
make: Entering directory '/opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared/build'
  CXX(target) Release/obj.target/openzwave_shared/src/callbacks.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-config.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-driver.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-groups.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-management.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-network.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-nodes.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-polling.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-scenes.o
  CXX(target) Release/obj.target/openzwave_shared/src/openzwave-values.o
  CXX(target) Release/obj.target/openzwave_shared/src/utils.o
../src/utils.cc: In function ‘v8::Local <v8::object>OZW::zwaveValue2v8Value(OpenZWave::ValueID)’:
../src/utils.cc:203:3: error: ‘EscapableHandleScope’ was not declared in this scope
../src/utils.cc:203:3: note: suggested alternative:
/opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared/node_modules/nan/nan.h:361:7: note:   ‘Nan::EscapableHandleScope’
../src/utils.cc:203:24: error: expected ‘;’ before ‘handle_scope’
../src/utils.cc:239:11: error: ‘handle_scope’ was not declared in this scope
../src/utils.cc:202:16: warning: unused variable ‘isolate’ [-Wunused-variable]
../src/utils.cc: In function ‘v8::Local <v8::object>OZW::zwaveSceneValue2v8Value(uint8, OpenZWave::ValueID)’:
../src/utils.cc:245:3: error: ‘EscapableHandleScope’ was not declared in this scope
../src/utils.cc:245:3: note: suggested alternative:
/opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared/node_modules/nan/nan.h:361:7: note:   ‘Nan::EscapableHandleScope’
../src/utils.cc:245:24: error: expected ‘;’ before ‘handle_scope’
../src/utils.cc:275:10: error: ‘handle_scope’ was not declared in this scope
../src/utils.cc:244:16: warning: unused variable ‘isolate’ [-Wunused-variable]
../src/utils.cc:276:2: warning: control reaches end of non-void function [-Wreturn-type]
../src/utils.cc: In function ‘v8::Local <v8::object>OZW::zwaveValue2v8Value(OpenZWave::ValueID)’:
../src/utils.cc:240:2: warning: control reaches end of non-void function [-Wreturn-type]
openzwave_shared.target.mk:104: recipe for target 'Release/obj.target/openzwave_shared/src/utils.o' failed
make: *** [Release/obj.target/openzwave_shared/src/utils.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared/build'
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:267:23)
gyp ERR! stack     at ChildProcess.EventEmitter.emit (events.js:98:17)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (child_process.js:789:12)
gyp ERR! System Linux 4.1.13-v7+
gyp ERR! command "node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared
gyp ERR! node -v v0.10.22
gyp ERR! node-gyp -v v0.11.0
gyp ERR! not ok
npm WARN optional dep failed, continuing iobroker.zwave@0.2.5</v8::object></v8::object></v8::object>

versteckt

Hallo,

also für mich ist mal die letzte Zeile relevant, er behauptet, das er die Version 0.2.5 installieren will.

Das ist dann schon mal falsch.

Hast du per URL versucht zu installieren, oder per Update Funktion von ioBroker?

versteckt

Ausserdem gehe ich mal davon aus, das du das ganze mit Node 0.10.x versuchst.

Werde mal bei meinem Test Raspi die Version installieren und schauen was passiert.

versteckt

Hallo,

kann den Fehler nachvollziehen und habe deswegen ein Ticket (https://github.com/OpenZWave/node-openz … /issues/83) eröffnet.

LG Christian

versteckt

So, Antwort ist schon da.

node 0.10 ist nicht mehr unterstützt, aufgrund dieses Fehlers.

LG Christian

AlCalzone

~~@versteckt:~~

also für mich ist mal die letzte Zeile relevant, er behauptet, das er die Version 0.2.5 installieren will.

Das ist dann schon mal falsch.

Hast du per URL versucht zu installieren, oder per Update Funktion von ioBroker? `
Ich habe sowohl per URL (siehe der längere Beitrag Seite 2) als auch per Update-Funktion probiert, bei beiden tritt der Fehler auf. Wenn ich per URL installiere, steht am Ende des Logs die Version 0.2.9, dennoch zeigt mir das ioBroker-Interface 0.2.5 als installiert an, es läuft also nicht durch.

~~@versteckt:~~

node 0.10 ist nicht mehr unterstützt, aufgrund dieses Fehlers. `
node.js ist die im vorkonfigurierten Image verwendete Version 0.10.22. Was heißt das jetzt für mich? Warte ich auf ein Update des Adapters oder kann ich den Fehler selbst beheben?

Danke schonmal für die prompte Antwort!

versteckt

Hallo, der Entwickler von openzwave-shared hat eine Anpassung durchgeführt,

bei mir funktioniert nun das manuelle kompilieren.

Sobald eine offizielle Version von ihm zur Verfügung steht, mache ich ein Update und gebe Bescheid.

LG Christian

versteckt

Hallo, Fix ist drinnen, bei mir hat es mit 0.10 node funktioniert, bitte testen.

Zusätzlich sind dann auch gleich ein paar Hotfix von mir drinnen:

0.2.9.1 (2016-03-11)

(husky-koglhof)

Fixed setConfigParam,

Removed hardcoded 'lbl' Value in dynamic Listbox

Extended 'forceInit' Function, config File will be removed too

LG Christian

AlCalzone

Installation ist einwandfrei durchgelaufen, demnächst Testberichte.

Edit: läuft leider nicht, direkt nach dem Adapter-Start finde ich folgenden Fehler im Log:
> error instance system.adapter.zwave.0 terminated with code 103 ()

Edit #2: Nach Downgrade auf 0.2.5 läuft es wieder, scheint also ein Problem der neuen Version zu sein.

versteckt

Hallo, kriegst du außer dieser Meldung noch andere?

Bzw. mal mit Debug starten, bzw.

mir mal das OZW log zukommen lassen.

Gesendet von meinem iPhone mit Tapatalk

juli465

Hallo,

Ich hab mich jetzt auch endlich mal hier angemeldet.

Ich habe iobroker unter jessi laufen. Hat zwar etwas gedauert bis Z-Wave anfangs lief, aber irgendwann hat es funktioniert.

Habe jetzt auch die 0.2.9 drauf, weil ich mit 0.2.5 nur Probleme hatte.

@AlCazone: lösche bitte mal Z-Wave komplett aus ioBroker und installiere dann die 0.2.9 neu. Das hat mir bei diesem Problem auch geholfen.

Gesendet von iPhone mit Tapatalk

AlCalzone

Komisch, habs jetzt einfach nochmal deinstalliert und wieder installiert, jetzt scheint es zu laufen.

versteckt

Hallo, bedeutet, die Version 0.2.9.1 ist aktiv?

LG Christian

AlCalzone

Sorry für die späte Antwort, komme erst jetzt wieder zum Arbeiten an meinem Projekt.

Ja, 0.2.9 läuft auf dem Raspi.

Großartig wäre es, wenn einige der Funktionen des Adapters über ioBroker-States zugänglich gemacht würden. Ich arbeite an einer Automatisierungslösung mit dem Skript-Modul, da wäre folgendes wirklich interessant:

Statusmeldung des Adapters wie "alle Nodes fertig geladen", "Treiber/Controller fertig initialisiert"
aktivieren/deaktivieren des inclusion/exclusion Modus der zwave-Platine

versteckt

Hallo,

Version: 0.2.9.2 (2016-03-25)

(husky-koglhof)

add .ready State to each Node and zwave.0 Core Object.

On startup set to false. On "ready" / "scan completed" set to true.

.) Statusmeldung des Adapters wie "alle Nodes fertig geladen", "Treiber/Controller fertig initialisiert"

-> erledigt

.) aktivieren/deaktivieren des inclusion/exclusion Modus der zwave-Platine

-> Siehe hierzu https://github.com/OpenZWave/node-openz … ME-mgmt.md

-> ...If your OZW version is 1.3 or greater, then there's a whole bunch of new calls, which effectively replace the old BeginControllerCommand. There's also no CancelControllerCommand thus you can't cancel any pending commands (they simply timeout)...

Sobald du das erfolgreich getestet hast, erzeuge ich eine 0.3.0 Version, welche dann wieder über iobroker zum aktualisieren funktioniert.

LG Christian

Lenny.CB

~~@versteckt:~~

Hallo,

Version: 0.2.9.2 (2016-03-25)

(husky-koglhof)

add .ready State to each Node and zwave.0 Core Object.

On startup set to false. On "ready" / "scan completed" set to true.

.) Statusmeldung des Adapters wie "alle Nodes fertig geladen", "Treiber/Controller fertig initialisiert"

-> erledigt

.) aktivieren/deaktivieren des inclusion/exclusion Modus der zwave-Platine

-> Siehe hierzu https://github.com/OpenZWave/node-openz … ME-mgmt.md

-> ...If your OZW version is 1.3 or greater, then there's a whole bunch of new calls, which effectively replace the old BeginControllerCommand. There's also no CancelControllerCommand thus you can't cancel any pending commands (they simply timeout)...

Sobald du das erfolgreich getestet hast, erzeuge ich eine 0.3.0 Version, welche dann wieder über iobroker zum aktualisieren funktioniert.

LG Christian `

Hi, musste auch grad alles neu machen.

Dem nach auch zwave. egal wie ich es versuche zu installieren, es klappt einfach nicht mehr.

Installation läuft zwar durch kommen aber Fehler beim Starten der Instanz:

was sagt dieses LOG aus?

host-iobroker	2016-03-25 17:11:30	info	Restart adapter system.adapter.zwave.0 because enabled
host-iobroker	2016-03-25 17:11:30	error	instance system.adapter.zwave.0 terminated with code 6 (uncaught exception)
Error:	2016-03-25 17:11:30	error	at Function.Module._load (module.js:310:12)
Error:	2016-03-25 17:11:30	error	at Module.load (module.js:355:32)
Error:	2016-03-25 17:11:30	error	at Object.Module._extensions..js (module.js:478:10)
Error:	2016-03-25 17:11:30	error	at Module._compile (module.js:460:26)
Error:	2016-03-25 17:11:30	error	at Object. (/opt/iobroker/node_modules/iobroker.zwave/node_modules/openzwave-shared/lib/openzwave-shared.js:26:19)
Error:	2016-03-25 17:11:30	error	at require (module.js:384:17)
Error:	2016-03-25 17:11:30	error	at Module.require (module.js:365:17)
Error:	2016-03-25 17:11:30	error	at Function.Module._load (module.js:310:12)
Error:	2016-03-25 17:11:30	error	at Module.load (module.js:355:32)
Error:	2016-03-25 17:11:30	error	at Error (native)
Error:	2016-03-25 17:11:30	error	libopenzwave.so.1.4: cannot open shared object file: No such file or directory
uncaught	2016-03-25 17:11:30	error	exception: libopenzwave.so.1.4: cannot open shared object file: No such file or directory
zwave-0	2016-03-25 17:11:29	info	starting. Version 0.2.9 in /opt/iobroker/node_modules/iobroker.zwave
host-iobroker	2016-03-25 17:11:26	info	instance system.adapter.zwave.0 started with pid 2469

Grüße,Lenny

versteckt

Hallo,

kannst du mal auf deinem Rechner nach dieser Datei suchen? libopenzwave.so.1.4

Sollte normalerweise in "/usr/local/lib/libopenzwave.so.1.4" zu finden sein.

Ausserdem müsste "/usr/local/lib/pkgconfig/libopenzwave.pc" vorhanden sein.

Probier sonst mal ein "ldconfig", dann müsste dein LD_LIBRARY_PATH neu gesetzt werden.

Bzw. "ldconfig -p|grep zwave"

Dann siehst du wo im Cache die Datei sein sollte.

Lenny.CB

~~@versteckt:~~

Hallo,

kannst du mal auf deinem Rechner nach dieser Datei suchen? libopenzwave.so.1.4

Sollte normalerweise in "/usr/local/lib/libopenzwave.so.1.4" zu finden sein.

Ausserdem müsste "/usr/local/lib/pkgconfig/libopenzwave.pc" vorhanden sein.

Probier sonst mal ein "ldconfig", dann müsste dein LD_LIBRARY_PATH neu gesetzt werden.

Bzw. "ldconfig -p|grep zwave"

Dann siehst du wo im Cache die Datei sein sollte. `

Sollte normalerweise in "/usr/local/lib/libopenzwave.so.1.4" zu finden sein.
````ist da wo sie sein soll

Ausserdem müsste "/usr/local/lib/pkgconfig/libopenzwave.pc" vorhanden sein.


so, "lldconfig -p|grep zwave" ist gemacht…

schaut trotzdem komisch aus...

LOG:

iobroker 2016-03-25 18:15:36 info host.iobroker Restart adapter system.adapter.zwave.0 because enabled
iobroker 2016-03-25 18:15:36 error host.iobroker instance system.adapter.zwave.0 terminated with code 6 (uncaught exception)
zwave.0 2016-03-25 18:15:34 error TypeError: setValue: OpenZWave valueId not found at TypeError (native) at Socket. (/opt/iobroker/node_modules/iobroker.zwave/main.js:518:51) at Socket.onack (/opt/iobroker/node_
zwave.0 2016-03-25 18:15:34 error uncaught exception: setValue: OpenZWave valueId not found
zwave.0 2016-03-25 18:15:34 info zwave.0 setState for: nodeid=undefined: comclass=undefined: index=undefined: instance=undefined: value=true
zwave.0 2016-03-25 18:15:34 warn zwave.0 Object 'zwave.0.NODE9.ready' not found for stateChange
zwave.0 2016-03-25 18:15:34 warn zwave.0 Object 'zwave.0.NODE8.ready' not found for stateChange
zwave.0 2016-03-25 18:15:34 warn zwave.0 Object 'zwave.0.NODE7.ready' not found for stateChange
zwave.0 2016-03-25 18:15:34 warn zwave.0 Object 'zwave.0.NODE6.ready' not found for stateChange
zwave.0 2016-03-25 18:15:34 warn zwave.0 Object 'zwave.0.NODE5.ready' not found for stateChange
zwave.0 2016-03-25 18:15:34 warn zwave.0 Object 'zwave.0.NODE4.ready' not found for stateChange
zwave.0 2016-03-25 18:15:33 info zwave.0 Scan completed
zwave.0 2016-03-25 18:15:33 info zwave.0 node ready nodeid:9 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0301","productid":"0x1001","type":"Motor
zwave.0 2016-03-25 18:15:33 info zwave.0 node ready nodeid:8 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor
zwave.0 2016-03-25 18:15:33 info zwave.0 node ready nodeid:7 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor
zwave.0 2016-03-25 18:15:33 info zwave.0 node ready nodeid:6 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0301","productid":"0x1001","type":"Motor
zwave.0 2016-03-25 18:15:33 info zwave.0 node ready nodeid:5 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGWPE Wall Plug","producttype":"0x0600","productid":"0x1000","type":"Binary Switch","name":"",
zwave.0 2016-03-25 18:15:33 info zwave.0 node ready nodeid:4 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor
zwave.0 2016-03-25 18:15:29 info zwave.0 node ready nodeid:1 nodeinfo:{"manufacturer":"Aeotec","manufacturerid":"0x0086","product":"Z-Stick Gen5","producttype":"0x0001","productid":"0x005a","type":"Static PC Controller","name":"","lo
zwave.0 2016-03-25 18:15:22 info zwave.0 node9: nop, currently not implemented
zwave.0 2016-03-25 18:15:22 info zwave.0 node8: nop, currently not implemented
zwave.0 2016-03-25 18:15:22 info zwave.0 node7: nop, currently not implemented
zwave.0 2016-03-25 18:15:22 info zwave.0 node6: nop, currently not implemented
zwave.0 2016-03-25 18:15:22 info zwave.0 node5: nop, currently not implemented
zwave.0 2016-03-25 18:15:22 info zwave.0 node4: nop, currently not implemented
zwave.0 2016-03-25 18:15:22 info zwave.0 nodeid 9 is now available, but maybe not ready
zwave.0 2016-03-25 18:15:22 info zwave.0 nodeid 8 is now available, but maybe not ready
zwave.0 2016-03-25 18:15:22 info zwave.0 nodeid 7 is now available, but maybe not ready
zwave.0 2016-03-25 18:15:22 info zwave.0 nodeid 6 is now available, but maybe not ready
zwave.0 2016-03-25 18:15:22 info zwave.0 nodeid 5 is now available, but maybe not ready
zwave.0 2016-03-25 18:15:22 info zwave.0 nodeid 4 is now available, but maybe not ready
zwave.0 2016-03-25 18:15:21 info zwave.0 nodeid 1 is now available, but maybe not ready
zwave.0 2016-03-25 18:15:21 info zwave.0 driver ready: homeid = f331c5f6
zwave.0 2016-03-25 18:15:21 info zwave.0 scanning homeid=0xf331c5f6...
zwave.0 2016-03-25 18:15:21 info zwave.0 connected: homeid = 1.4.0
zwave.0 2016-03-25 18:15:19 info zwave.0 starting. Version 0.2.9 in /opt/iobroker/node_modules/iobroker.zwave
iobroker 2016-03-25 18:15:16 info host.iobroker instance system.adapter.zwave.0 started with pid 4874
iobroker 2016-03-25 18:14:45 info host.iobroker Restart adapter system.adapter.zwave.0 because enabled
iobroker 2016-03-25 18:14:45 error host.iobroker instance system.adapter.zwave.0 terminated with code 6 (uncaught exception)
zwave.0 2016-03-25 18:14:43 error TypeError: setValue: OpenZWave valueId not found at TypeError (native) at Socket. (/opt/iobroker/node_modules/iobroker.zwave/main.js:518:51) at Socket.onack (/opt/iobroker/node_
zwave.0 2016-03-25 18:14:43 error uncaught exception: setValue: OpenZWave valueId not found
zwave.0 2016-03-25 18:14:43 info zwave.0 setState for: nodeid=undefined: comclass=undefined: index=undefined: instance=undefined: value=true
zwave.0 2016-03-25 18:14:43 warn zwave.0 Object 'zwave.0.NODE9.ready' not found for stateChange
zwave.0 2016-03-25 18:14:43 warn zwave.0 Object 'zwave.0.NODE8.ready' not found for stateChange
zwave.0 2016-03-25 18:14:43 warn zwave.0 Object 'zwave.0.NODE7.ready' not found for stateChange
zwave.0 2016-03-25 18:14:43 warn zwave.0 Object 'zwave.0.NODE6.ready' not found for stateChange
zwave.0 2016-03-25 18:14:43 warn zwave.0 Object 'zwave.0.NODE5.ready' not found for stateChange
zwave.0 2016-03-25 18:14:43 warn zwave.0 Object 'zwave.0.NODE4.ready' not found for stateChange
zwave.0 2016-03-25 18:14:42 info zwave.0 Scan completed
zwave.0 2016-03-25 18:14:42 info zwave.0 node ready nodeid:9 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0301","productid":"0x1001","type":"Motor
zwave.0 2016-03-25 18:14:42 info zwave.0 node ready nodeid:8 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor
zwave.0 2016-03-25 18:14:42 info zwave.0 node ready nodeid:7 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor
zwave.0 2016-03-25 18:14:42 info zwave.0 node ready nodeid:6 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0301","productid":"0x1001","type":"Motor
zwave.0 2016-03-25 18:14:42 info zwave.0 node ready nodeid:5 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGWPE Wall Plug","producttype":"0x0600","productid":"0x1000","type":"Binary Switch","name":"",
zwave.0 2016-03-25 18:14:42 info zwave.0 node ready nodeid:4 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor
zwave.0 2016-03-25 18:14:40 info zwave.0 node9: timeout, currently not implemented
zwave-0 2016-03-25 18:14:28 info node9: timeout, currently not implemented
zwave-0 2016-03-25 18:14:18 info node9: timeout, currently not implemented
zwave-0 2016-03-25 18:14:08 info node ready nodeid:1 nodeinfo:{"manufacturer":"Aeotec","manufacturerid":"0x0086","product":"Z-Stick Gen5","producttype":"0x0001","productid":"0x005a","type":"Static PC Controller","name":"","loc":""}
zwave-0 2016-03-25 18:14:02 info node9: nop, currently not implemented
zwave-0 2016-03-25 18:14:02 info node8: nop, currently not implemented
zwave-0 2016-03-25 18:14:02 info node7: nop, currently not implemented
zwave-0 2016-03-25 18:14:02 info node6: nop, currently not implemented
zwave-0 2016-03-25 18:14:02 info node5: nop, currently not implemented
zwave-0 2016-03-25 18:14:02 info node4: nop, currently not implemented
zwave-0 2016-03-25 18:14:02 info nodeid 9 is now available, but maybe not ready
zwave-0 2016-03-25 18:14:02 info nodeid 8 is now available, but maybe not ready
zwave-0 2016-03-25 18:14:01 info nodeid 7 is now available, but maybe not ready
zwave-0 2016-03-25 18:14:01 info nodeid 6 is now available, but maybe not ready
zwave-0 2016-03-25 18:14:01 info nodeid 5 is now available, but maybe not ready
zwave-0 2016-03-25 18:14:01 info nodeid 4 is now available, but maybe not ready
zwave-0 2016-03-25 18:14:01 info nodeid 1 is now available, but maybe not ready
zwave-0 2016-03-25 18:14:01 info driver ready: homeid = f331c5f6
zwave-0 2016-03-25 18:14:01 info scanning homeid=0xf331c5f6...
zwave-0 2016-03-25 18:14:00 info connected: homeid = 1.4.0
zwave-0 2016-03-25 18:13:59 info starting. Version 0.2.9 in /opt/iobroker/node_modules/iobroker.zwave
host-iobroker 2016-03-25 18:13:55 info instance system.adapter.zwave.0 started with pid 4863
host-iobroker 2016-03-25 18:13:25 info Restart adapter system.adapter.zwave.0 because enabled
host-iobroker 2016-03-25 18:13:25 error instance system.adapter.zwave.0 terminated with code 6 (uncaught exception)
TypeError: 2016-03-25 18:13:23 error at Decoder.add (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/socket.io-parser/index.js:247:12)
TypeError: 2016-03-25 18:13:23 error at Decoder.Emitter.emit (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/socket.io-parser/node_modules/component-emitter/index.js:134:20)
TypeError: 2016-03-25 18:13:23 error at Decoder. (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-bind/index.js:21:15)
TypeError: 2016-03-25 18:13:23 error at Manager.ondecoded (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/manager.js:333:8)
TypeError: 2016-03-25 18:13:23 error at Manager.Emitter.emit (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-emitter/index.js:131:20)
TypeError: 2016-03-25 18:13:23 error at Manager. (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-bind/index.js:21:15)
TypeError: 2016-03-25 18:13:23 error at Socket.onpacket (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/socket.js:229:12)
TypeError: 2016-03-25 18:13:23 error at Socket.onack (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/socket.js:305:9)
TypeError: 2016-03-25 18:13:23 error at Socket. (/opt/iobroker/node_modules/iobroker.zwave/main.js:518:51)
TypeError: 2016-03-25 18:13:23 error at TypeError (native)
TypeError: 2016-03-25 18:13:23 error setValue: OpenZWave valueId not found
uncaught 2016-03-25 18:13:23 error exception: setValue: OpenZWave valueId not found
zwave-0 2016-03-25 18:13:23 info setState for: nodeid=undefined: comclass=undefined: index=undefined: instance=undefined: value=true
zwave-0 2016-03-25 18:13:23 warn Object 'zwave.0.NODE9.ready' not found for stateChange
zwave-0 2016-03-25 18:13:23 warn Object 'zwave.0.NODE8.ready' not found for stateChange
zwave-0 2016-03-25 18:13:23 warn Object 'zwave.0.NODE7.ready' not found for stateChange
zwave-0 2016-03-25 18:13:23 warn Object 'zwave.0.NODE6.ready' not found for stateChange
zwave-0 2016-03-25 18:13:23 warn Object 'zwave.0.NODE5.ready' not found for stateChange
zwave-0 2016-03-25 18:13:23 warn Object 'zwave.0.NODE4.ready' not found for stateChange
zwave-0 2016-03-25 18:13:22 info Scan completed
zwave-0 2016-03-25 18:13:22 info node ready nodeid:9 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0301","productid":"0x1001","type":"Motor Contro
zwave-0 2016-03-25 18:13:22 info node ready nodeid:8 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor Contro
zwave-0 2016-03-25 18:13:22 info node ready nodeid:7 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor Contro
zwave-0 2016-03-25 18:13:22 info node ready nodeid:6 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0301","productid":"0x1001","type":"Motor Contro
zwave-0 2016-03-25 18:13:22 info node ready nodeid:5 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGWPE Wall Plug","producttype":"0x0600","productid":"0x1000","type":"Binary Switch","name":"","loc":"
zwave-0 2016-03-25 18:13:22 info node ready nodeid:4 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor Contro
zwave-0 2016-03-25 18:13:19 info node9: timeout, currently not implemented
host-iobroker 2016-03-25 18:13:13 warn instance system.adapter.zwave.0 already running with pid 4853
zwave-0 2016-03-25 18:13:06 info node ready nodeid:1 nodeinfo:{"manufacturer":"Aeotec","manufacturerid":"0x0086","product":"Z-Stick Gen5","producttype":"0x0001","productid":"0x005a","type":"Static PC Controller","name":"","loc":""}
zwave-0 2016-03-25 18:12:59 info node9: nop, currently not implemented
zwave-0 2016-03-25 18:12:59 info node8: nop, currently not implemented
zwave-0 2016-03-25 18:12:59 info node7: nop, currently not implemented
zwave-0 2016-03-25 18:12:59 info node6: nop, currently not implemented
zwave-0 2016-03-25 18:12:59 info node5: nop, currently not implemented
zwave-0 2016-03-25 18:12:59 info node4: nop, currently not implemented
zwave-0 2016-03-25 18:12:59 info nodeid 9 is now available, but maybe not ready
zwave-0 2016-03-25 18:12:59 info nodeid 8 is now available, but maybe not ready
zwave-0 2016-03-25 18:12:58 info nodeid 7 is now available, but maybe not ready
zwave-0 2016-03-25 18:12:58 info nodeid 6 is now available, but maybe not ready
zwave-0 2016-03-25 18:12:58 info nodeid 5 is now available, but maybe not ready
zwave-0 2016-03-25 18:12:58 info nodeid 4 is now available, but maybe not ready
zwave-0 2016-03-25 18:12:58 info nodeid 1 is now available, but maybe not ready
zwave-0 2016-03-25 18:12:58 info driver ready: homeid = f331c5f6
zwave-0 2016-03-25 18:12:58 info scanning homeid=0xf331c5f6...
zwave-0 2016-03-25 18:12:57 info connected: homeid = 1.4.0
zwave-0 2016-03-25 18:12:56 info starting. Version 0.2.9 in /opt/iobroker/node_modules/iobroker.zwave
host-iobroker 2016-03-25 18:12:52 info instance system.adapter.zwave.0 started with pid 4853

versteckt

Ok, der Fehler ist mir nicht klar, dagegen kann ich auch was machen:

zwave.0   2016-03-25 18:14:43   info   zwave.0 setState for: nodeid=undefined: comclass=undefined: index=undefined: instance=undefined: value=true

Mir ist nur nicht klar, warum der auftritt.

Hast du versucht einen Zustand zu verändern? Und wenn ja, welchen?

LG Christian

versteckt

Kannst du in der main.js von zwave mal folgendes hinzufügen?

if (nodeid == undefined) {
                                    adapter.log.error("This state is not valid: " + JSON.stringify(state));
                                    adapter.log.error("Object was: " + JSON.stringify(obj));
                                }

Und zwar vor der Zeile 288

                                switch (action) {

Und mir dann nochmals ein Log schicken?

NEWS

Z-Wave Adapter

Support us

883
Online

31.6k
Users

79.5k
Topics

1.3m
Posts

NEWS

Z-Wave Adapter

Support us

883Online

31.6kUsers

79.5kTopics

1.3mPosts

883
Online

31.6k
Users

79.5k
Topics

1.3m
Posts