Admin Adapter wird immer wieder gestoppt
-
@hanni700 sagte in Admin Adapter wird immer wieder gestoppt:
npm ERR! code EBADENGINE
was ist denn das?
was hayt du wo und wie nach welcher Anleitung installiert?
@homoran Das kann ich leider auch nicht sagen, ich habe das eigentlich zuerst so versuchta: https://www.iobroker.net/docu/index-26.htm?page_id=3928&lang=de und dann hiearmit versucht gerade zu ziehen: https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian, und soweit bin ich nun gekommen.....
Alles läuft, ich komme nur nicht auf das Webinterface -
@homoran Das kann ich leider auch nicht sagen, ich habe das eigentlich zuerst so versuchta: https://www.iobroker.net/docu/index-26.htm?page_id=3928&lang=de und dann hiearmit versucht gerade zu ziehen: https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian, und soweit bin ich nun gekommen.....
Alles läuft, ich komme nur nicht auf das Webinterfacecd /opt/iobroker npm ls homebridge-lib -
@homoran said in Admin Adapter wird immer wieder gestoppt:
iobroker add admin --port 8089 --debug
pi@raspberrypi:/opt/iobroker/log $ iobroker add admin --port 8089 --debug NPM version: 8.11.0 Installing iobroker.admin@5.3.8... (System call) npm ERR! code EBADENGINE npm ERR! engine Unsupported engine npm ERR! engine Not compatible with your version of node/npm: homebridge-lib@4.7.16 npm ERR! notsup Not compatible with your version of node/npm: homebridge-lib@4.7.16 npm ERR! notsup Required: {"homebridge":"^1.1.0","node":"^12.19.0"} npm ERR! notsup Actual: {"npm":"8.11.0","node":"v16.16.0"} npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-08-14T12_21_00_687Z-debug-0.log host.raspberrypi Cannot install iobroker.admin@5.3.8: 1@hanni700 sagte in Admin Adapter wird immer wieder gestoppt:
npm ERR! notsup Required: {"homebridge":"^1.1.0","node":"^12.19.0"}
was ist das denn für eine homebridge Version?
der Rest passt ja -
pi@raspberrypi:/opt/iobroker $ npm ls | grep -E 'github.com|ERR' npm ERR! code ELSPROBLEMS npm ERR! extraneous: @types/caseless@0.12.2 /opt/iobroker/node_modules/@types/ca seless npm ERR! extraneous: @types/request@2.48.8 /opt/iobroker/node_modules/@types/req uest npm ERR! extraneous: @types/tough-cookie@4.0.2 /opt/iobroker/node_modules/@types /tough-cookie npm ERR! extraneous: buffer-shims@1.0.0 /opt/iobroker/node_modules/buffer-shims npm ERR! extraneous: busboy@1.6.0 /opt/iobroker/node_modules/busboy npm ERR! extraneous: coffee-compiler@0.3.2 /opt/iobroker/node_modules/coffee-com piler npm ERR! extraneous: coffee-script@1.12.7 /opt/iobroker/node_modules/coffee-scri pt npm ERR! extraneous: express-fileupload@1.4.0 /opt/iobroker/node_modules/express -fileupload npm ERR! extraneous: futoin-hkdf@1.4.3 /opt/iobroker/node_modules/futoin-hkdf npm ERR! extraneous: homebridge-plugin-wrapper@2.2.1 /opt/iobroker/node_modules/ homebridge-plugin-wrapper npm ERR! invalid: iobroker.admin@ /opt/iobroker/node_modules/iobroker.admin npm ERR! invalid: iobroker.ham-wemo@3.0.0 /opt/iobroker/node_modules/iobroker.ha m-wemo npm ERR! extraneous: jsonata@1.8.6 /opt/iobroker/node_modules/jsonata npm ERR! extraneous: mock-require@3.0.3 /opt/iobroker/node_modules/mock-require npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect npm ERR! extraneous: node-persist@0.0.11 /opt/iobroker/node_modules/node-persist npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors npm ERR! extraneous: q@1.1.2 /opt/iobroker/node_modules/q npm ERR! extraneous: remove-trailing-separator@1.1.0 /opt/iobroker/node_modules/ remove-trailing-separator npm ERR! extraneous: streamsearch@1.1.0 /opt/iobroker/node_modules/streamsearch npm ERR! extraneous: string-argv@0.3.1 /opt/iobroker/node_modules/string-argv npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2 npm ERR! extraneous: typescript@ /opt/iobroker/node_modules/typescript npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc npm ERR! extraneous: vm2@3.9.10 /opt/iobroker/node_modules/vm2 npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-08-14T12_36_57_528Z-debug-0.logpi@raspberrypi:/opt/iobroker $ iobroker update -i Used repository: Stable (default) Adapter "alexa2" : 3.11.2 , installed 3.12.0 Adapter "backitup" : 2.4.10 , installed 2.4.9 [Updatable] Adapter "cloud" : 4.1.1 , installed 4.1.1 Adapter "devices" : 1.0.12 , installed 1.0.10 [Updatable] Adapter "discovery" : 3.0.5 , installed 3.0.3 [Updatable] Adapter "echarts" : 1.0.12 , installed 1.0.8 [Updatable] Adapter "ecovacs-deebot": 1.4.4 , installed 1.4.4 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "ham" : 4.0.2 , installed 5.0.2 Adapter "ham-wemo" : 3.0.0 , installed 3.0.0 Adapter "history" : 2.2.0 , installed 2.1.2 [Updatable] Adapter "hue" : 3.7.0 , installed 3.7.0 Adapter "hue-extended" : 2.0.0 , installed 2.0.0 Adapter "ical" : 1.13.1 , installed 1.12.1 [Updatable] Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 5.7.0 , installed 5.7.0 Controller "js-controller": 4.0.23 , installed 4.0.23 Adapter "kecontact" : 1.4.1 , installed 1.4.0 [Updatable] Adapter "modbus" : 5.0.4 , installed 5.0.3 [Updatable] Adapter "mqtt" : 3.0.6 , installed 3.0.5 [Updatable] Adapter "mysensors" : 3.0.0 , installed 3.0.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "parser" : 1.1.7 , installed 1.1.6 [Updatable] Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "rssfeed" : 1.0.0 , installed 1.0.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.0.0 , installed 5.3.2 [Updatable] Adapter "simple-api" : 2.7.0 , installed 2.7.0 Adapter "socketio" : 4.2.0 , installed 6.1.4 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "tankerkoenig" : 2.1.1 , installed 2.1.1 Adapter "telegram" : 1.13.0 , installed 1.13.0 Adapter "tr-064" : 4.2.16 , installed 4.2.16 Adapter "trashschedule": 2.0.3 , installed 1.4.3 [Updatable] Adapter "tuya" : 3.6.15 , installed 3.6.15 Adapter "unifi" : 0.5.10 , installed 0.5.10 Adapter "viessmannapi" : 2.0.9 , installed 2.0.9 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-hqwidgets": 1.2.0 , installed 1.2.0 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.3 Adapter "vw-connect" : 0.0.51 , installed 0.0.50 [Updatable] Adapter "web" : 4.3.0 , installed 5.2.0 Adapter "whatsapp-cmb" : 0.2.2 , installed 0.2.2 Adapter "wifilight" : 1.1.4 , installed 1.1.3 [Updatable] Adapter "ws" : 1.3.0 , installed 2.1.3 Adapter "zehnder-cloud": 0.0.6 , installed 0.0.6pi@raspberrypi:/opt/iobroker $ sudo ln -s /usr/bin/node /usr/bin/nodejs ln: die symbolische Verknüpfung '/usr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereitspi@raspberrypi:/opt/iobroker $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo ap t update && apt policy nodejs armv7l /usr/bin/nodejs /usr/bin/node /usr/bin/npm v16.16.0 v16.16.0 8.11.0 pi /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm ls | grep -E 'github.com|ERR' npm ERR! code ELSPROBLEMS npm ERR! extraneous: @types/caseless@0.12.2 /opt/iobroker/node_modules/@types/ca seless npm ERR! extraneous: @types/request@2.48.8 /opt/iobroker/node_modules/@types/req uest npm ERR! extraneous: @types/tough-cookie@4.0.2 /opt/iobroker/node_modules/@types /tough-cookie npm ERR! extraneous: buffer-shims@1.0.0 /opt/iobroker/node_modules/buffer-shims npm ERR! extraneous: busboy@1.6.0 /opt/iobroker/node_modules/busboy npm ERR! extraneous: coffee-compiler@0.3.2 /opt/iobroker/node_modules/coffee-com piler npm ERR! extraneous: coffee-script@1.12.7 /opt/iobroker/node_modules/coffee-scri pt npm ERR! extraneous: express-fileupload@1.4.0 /opt/iobroker/node_modules/express -fileupload npm ERR! extraneous: futoin-hkdf@1.4.3 /opt/iobroker/node_modules/futoin-hkdf npm ERR! extraneous: homebridge-plugin-wrapper@2.2.1 /opt/iobroker/node_modules/ homebridge-plugin-wrapper npm ERR! invalid: iobroker.admin@ /opt/iobroker/node_modules/iobroker.admin npm ERR! invalid: iobroker.ham-wemo@3.0.0 /opt/iobroker/node_modules/iobroker.ha m-wemo npm ERR! extraneous: jsonata@1.8.6 /opt/iobroker/node_modules/jsonata npm ERR! extraneous: mock-require@3.0.3 /opt/iobroker/node_modules/mock-require npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect npm ERR! extraneous: node-persist@0.0.11 /opt/iobroker/node_modules/node-persist npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors npm ERR! extraneous: q@1.1.2 /opt/iobroker/node_modules/q npm ERR! extraneous: remove-trailing-separator@1.1.0 /opt/iobroker/node_modules/ remove-trailing-separator npm ERR! extraneous: streamsearch@1.1.0 /opt/iobroker/node_modules/streamsearch npm ERR! extraneous: string-argv@0.3.1 /opt/iobroker/node_modules/string-argv npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2 npm ERR! extraneous: typescript@ /opt/iobroker/node_modules/typescript npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc npm ERR! extraneous: vm2@3.9.10 /opt/iobroker/node_modules/vm2 npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-08-14T12_36_57_528Z-debug-0.log ^C^[xBin aber noch ziemlich neu beim Iobroken und programmieren nicht so meins....
-
cd /opt/iobroker npm ls homebridge-lib@thomas-braun said in Admin Adapter wird immer wieder gestoppt:
npm ls homebridge-lib
pi@raspberrypi:/opt/iobroker $ npm ls homebridge-lib iobroker.inst@2.0.3 /opt/iobroker └── (empty) -
pi@raspberrypi:/opt/iobroker $ npm ls | grep -E 'github.com|ERR' npm ERR! code ELSPROBLEMS npm ERR! extraneous: @types/caseless@0.12.2 /opt/iobroker/node_modules/@types/ca seless npm ERR! extraneous: @types/request@2.48.8 /opt/iobroker/node_modules/@types/req uest npm ERR! extraneous: @types/tough-cookie@4.0.2 /opt/iobroker/node_modules/@types /tough-cookie npm ERR! extraneous: buffer-shims@1.0.0 /opt/iobroker/node_modules/buffer-shims npm ERR! extraneous: busboy@1.6.0 /opt/iobroker/node_modules/busboy npm ERR! extraneous: coffee-compiler@0.3.2 /opt/iobroker/node_modules/coffee-com piler npm ERR! extraneous: coffee-script@1.12.7 /opt/iobroker/node_modules/coffee-scri pt npm ERR! extraneous: express-fileupload@1.4.0 /opt/iobroker/node_modules/express -fileupload npm ERR! extraneous: futoin-hkdf@1.4.3 /opt/iobroker/node_modules/futoin-hkdf npm ERR! extraneous: homebridge-plugin-wrapper@2.2.1 /opt/iobroker/node_modules/ homebridge-plugin-wrapper npm ERR! invalid: iobroker.admin@ /opt/iobroker/node_modules/iobroker.admin npm ERR! invalid: iobroker.ham-wemo@3.0.0 /opt/iobroker/node_modules/iobroker.ha m-wemo npm ERR! extraneous: jsonata@1.8.6 /opt/iobroker/node_modules/jsonata npm ERR! extraneous: mock-require@3.0.3 /opt/iobroker/node_modules/mock-require npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect npm ERR! extraneous: node-persist@0.0.11 /opt/iobroker/node_modules/node-persist npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors npm ERR! extraneous: q@1.1.2 /opt/iobroker/node_modules/q npm ERR! extraneous: remove-trailing-separator@1.1.0 /opt/iobroker/node_modules/ remove-trailing-separator npm ERR! extraneous: streamsearch@1.1.0 /opt/iobroker/node_modules/streamsearch npm ERR! extraneous: string-argv@0.3.1 /opt/iobroker/node_modules/string-argv npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2 npm ERR! extraneous: typescript@ /opt/iobroker/node_modules/typescript npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc npm ERR! extraneous: vm2@3.9.10 /opt/iobroker/node_modules/vm2 npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-08-14T12_36_57_528Z-debug-0.logpi@raspberrypi:/opt/iobroker $ iobroker update -i Used repository: Stable (default) Adapter "alexa2" : 3.11.2 , installed 3.12.0 Adapter "backitup" : 2.4.10 , installed 2.4.9 [Updatable] Adapter "cloud" : 4.1.1 , installed 4.1.1 Adapter "devices" : 1.0.12 , installed 1.0.10 [Updatable] Adapter "discovery" : 3.0.5 , installed 3.0.3 [Updatable] Adapter "echarts" : 1.0.12 , installed 1.0.8 [Updatable] Adapter "ecovacs-deebot": 1.4.4 , installed 1.4.4 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "ham" : 4.0.2 , installed 5.0.2 Adapter "ham-wemo" : 3.0.0 , installed 3.0.0 Adapter "history" : 2.2.0 , installed 2.1.2 [Updatable] Adapter "hue" : 3.7.0 , installed 3.7.0 Adapter "hue-extended" : 2.0.0 , installed 2.0.0 Adapter "ical" : 1.13.1 , installed 1.12.1 [Updatable] Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 5.7.0 , installed 5.7.0 Controller "js-controller": 4.0.23 , installed 4.0.23 Adapter "kecontact" : 1.4.1 , installed 1.4.0 [Updatable] Adapter "modbus" : 5.0.4 , installed 5.0.3 [Updatable] Adapter "mqtt" : 3.0.6 , installed 3.0.5 [Updatable] Adapter "mysensors" : 3.0.0 , installed 3.0.0 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "parser" : 1.1.7 , installed 1.1.6 [Updatable] Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "rssfeed" : 1.0.0 , installed 1.0.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.0.0 , installed 5.3.2 [Updatable] Adapter "simple-api" : 2.7.0 , installed 2.7.0 Adapter "socketio" : 4.2.0 , installed 6.1.4 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "tankerkoenig" : 2.1.1 , installed 2.1.1 Adapter "telegram" : 1.13.0 , installed 1.13.0 Adapter "tr-064" : 4.2.16 , installed 4.2.16 Adapter "trashschedule": 2.0.3 , installed 1.4.3 [Updatable] Adapter "tuya" : 3.6.15 , installed 3.6.15 Adapter "unifi" : 0.5.10 , installed 0.5.10 Adapter "viessmannapi" : 2.0.9 , installed 2.0.9 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-hqwidgets": 1.2.0 , installed 1.2.0 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.3 Adapter "vw-connect" : 0.0.51 , installed 0.0.50 [Updatable] Adapter "web" : 4.3.0 , installed 5.2.0 Adapter "whatsapp-cmb" : 0.2.2 , installed 0.2.2 Adapter "wifilight" : 1.1.4 , installed 1.1.3 [Updatable] Adapter "ws" : 1.3.0 , installed 2.1.3 Adapter "zehnder-cloud": 0.0.6 , installed 0.0.6pi@raspberrypi:/opt/iobroker $ sudo ln -s /usr/bin/node /usr/bin/nodejs ln: die symbolische Verknüpfung '/usr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereitspi@raspberrypi:/opt/iobroker $ uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo ap t update && apt policy nodejs armv7l /usr/bin/nodejs /usr/bin/node /usr/bin/npm v16.16.0 v16.16.0 8.11.0 pi /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm ls | grep -E 'github.com|ERR' npm ERR! code ELSPROBLEMS npm ERR! extraneous: @types/caseless@0.12.2 /opt/iobroker/node_modules/@types/ca seless npm ERR! extraneous: @types/request@2.48.8 /opt/iobroker/node_modules/@types/req uest npm ERR! extraneous: @types/tough-cookie@4.0.2 /opt/iobroker/node_modules/@types /tough-cookie npm ERR! extraneous: buffer-shims@1.0.0 /opt/iobroker/node_modules/buffer-shims npm ERR! extraneous: busboy@1.6.0 /opt/iobroker/node_modules/busboy npm ERR! extraneous: coffee-compiler@0.3.2 /opt/iobroker/node_modules/coffee-com piler npm ERR! extraneous: coffee-script@1.12.7 /opt/iobroker/node_modules/coffee-scri pt npm ERR! extraneous: express-fileupload@1.4.0 /opt/iobroker/node_modules/express -fileupload npm ERR! extraneous: futoin-hkdf@1.4.3 /opt/iobroker/node_modules/futoin-hkdf npm ERR! extraneous: homebridge-plugin-wrapper@2.2.1 /opt/iobroker/node_modules/ homebridge-plugin-wrapper npm ERR! invalid: iobroker.admin@ /opt/iobroker/node_modules/iobroker.admin npm ERR! invalid: iobroker.ham-wemo@3.0.0 /opt/iobroker/node_modules/iobroker.ha m-wemo npm ERR! extraneous: jsonata@1.8.6 /opt/iobroker/node_modules/jsonata npm ERR! extraneous: mock-require@3.0.3 /opt/iobroker/node_modules/mock-require npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect npm ERR! extraneous: node-persist@0.0.11 /opt/iobroker/node_modules/node-persist npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors npm ERR! extraneous: q@1.1.2 /opt/iobroker/node_modules/q npm ERR! extraneous: remove-trailing-separator@1.1.0 /opt/iobroker/node_modules/ remove-trailing-separator npm ERR! extraneous: streamsearch@1.1.0 /opt/iobroker/node_modules/streamsearch npm ERR! extraneous: string-argv@0.3.1 /opt/iobroker/node_modules/string-argv npm ERR! extraneous: suncalc2@1.8.1 /opt/iobroker/node_modules/suncalc2 npm ERR! extraneous: typescript@ /opt/iobroker/node_modules/typescript npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc npm ERR! extraneous: vm2@3.9.10 /opt/iobroker/node_modules/vm2 npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-08-14T12_36_57_528Z-debug-0.log ^C^[xBin aber noch ziemlich neu beim Iobroken und programmieren nicht so meins....
@hanni700 sagte in Admin Adapter wird immer wieder gestoppt:
pi@raspberrypi:/opt/iobroker $ iobroker update -i
Used repository: Stable (default)wo ist denn homebridge?
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@hanni700 sagte in Admin Adapter wird immer wieder gestoppt:
pi@raspberrypi:/opt/iobroker $ iobroker update -i
Used repository: Stable (default)wo ist denn homebridge?
Vermutlich kommt das von der schrägen Version hier:
Adapter "ham" : 4.0.2 , installed 5.0.2Oder von da:
npm ERR! invalid: iobroker.ham-wemo@3.0.0 /opt/iobroker/node_modules/iobroker.ham-wemo -
Vermutlich kommt das von der schrägen Version hier:
Adapter "ham" : 4.0.2 , installed 5.0.2Oder von da:
npm ERR! invalid: iobroker.ham-wemo@3.0.0 /opt/iobroker/node_modules/iobroker.ham-wemo -
so ganz dringend benötige ich den nicht, wie kann ich den denn auf der Kosole deinstallieren? Dann kann ich ihn nachher im webinterface wieder installieren....
Versuch mal
iobroker stop iobroker del iobroker.ham-wemo iobroker del iobroker.admin iobroker update iobroker upgrade all -
Versuch mal
iobroker stop iobroker del iobroker.ham-wemo iobroker del iobroker.admin iobroker update iobroker upgrade all@thomas-braun said in Admin Adapter wird immer wieder gestoppt:
iobroker del iobroker.admin
pi@raspberrypi:/opt/iobroker $ iobroker del iobroker.ham-wemo Delete adapter "ham-wemo" host.raspberrypi Counted 1 meta of ham-wemo host.raspberrypi Counted 1 adapter for ham-wemo host.raspberrypi Counted 1 states (system.adapter.ham-wemo.*) from states host.raspberrypi file ham-wemo.admin deleted host.raspberrypi object ham-wemo deleted host.raspberrypi object ham-wemo.admin deleted host.raspberrypi Deleting 2 object(s). host.raspberrypi Deleting 1 state(s). Error deleting adapter ham-wemo from disk: host.raspberrypi: Cannot uninstall iobroker.ham-wemo: 217 You might have to delete it yourself! pi@raspberrypi:/opt/iobroker $ iobroker del iobroker.admin Delete adapter "admin" host.raspberrypi Counted 1 instances of admin Cannot remove adapter "admin", because instance "backitup" depends on it!Muss ich den iobroker vorher stoppen?
-
@thomas-braun said in Admin Adapter wird immer wieder gestoppt:
iobroker del iobroker.admin
pi@raspberrypi:/opt/iobroker $ iobroker del iobroker.ham-wemo Delete adapter "ham-wemo" host.raspberrypi Counted 1 meta of ham-wemo host.raspberrypi Counted 1 adapter for ham-wemo host.raspberrypi Counted 1 states (system.adapter.ham-wemo.*) from states host.raspberrypi file ham-wemo.admin deleted host.raspberrypi object ham-wemo deleted host.raspberrypi object ham-wemo.admin deleted host.raspberrypi Deleting 2 object(s). host.raspberrypi Deleting 1 state(s). Error deleting adapter ham-wemo from disk: host.raspberrypi: Cannot uninstall iobroker.ham-wemo: 217 You might have to delete it yourself! pi@raspberrypi:/opt/iobroker $ iobroker del iobroker.admin Delete adapter "admin" host.raspberrypi Counted 1 instances of admin Cannot remove adapter "admin", because instance "backitup" depends on it!Muss ich den iobroker vorher stoppen?
iobroker stop iobroker update iobroker upgrade admin@5.3.8 --debug -
iobroker stop iobroker update iobroker upgrade admin@5.3.8 --debug@thomas-braun said in Admin Adapter wird immer wieder gestoppt:
> iobroker stop > pi@raspberrypi:/opt/iobroker $ iobroker update > > Used repository: Stable (default) > > Adapter "alexa2" : 3.11.2 , installed 3.12.0 > > Adapter "backitup" : 2.4.10 , installed 2.4.9 [Updatable] > > Adapter "cloud" : 4.1.1 , installed 4.1.1 > > Adapter "devices" : 1.0.12 , installed 1.0.10 [Updatable] > > Adapter "discovery" : 3.0.5 , installed 3.0.3 [Updatable] > > Adapter "echarts" : 1.0.12 , installed 1.0.8 [Updatable] > > Adapter "ecovacs-deebot": 1.4.4 , installed 1.4.4 > > Adapter "flot" : 1.11.0 , installed 1.11.0 > > Adapter "ham" : 4.0.2 , installed 5.0.2 > > Adapter "ham-wemo" : 3.0.0 , installed 3.0.0 > > Adapter "history" : 2.2.0 , installed 2.1.2 [Updatable] > > Adapter "hue" : 3.7.0 , installed 3.7.0 > > Adapter "hue-extended" : 2.0.0 , installed 2.0.0 > > Adapter "ical" : 1.13.1 , installed 1.12.1 [Updatable] > > Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 > > Adapter "info" : 1.9.19 , installed 1.9.19 > > Adapter "javascript" : 5.7.0 , installed 5.7.0 > > Controller "js-controller": 4.0.23 , installed 4.0.23 > > Adapter "kecontact" : 1.4.1 , installed 1.4.0 [Updatable] > > Adapter "modbus" : 5.0.4 , installed 5.0.3 [Updatable] > > Adapter "mqtt" : 3.0.6 , installed 3.0.5 [Updatable] > > Adapter "mysensors" : 3.0.0 , installed 3.0.0 > > Adapter "net-tools" : 0.2.0 , installed 0.2.0 > > Adapter "parser" : 1.1.7 , installed 1.1.6 [Updatable] > > Adapter "rpi2" : 1.3.2 , installed 1.3.2 > > Adapter "rssfeed" : 1.0.0 , installed 1.0.0 > > Adapter "scenes" : 2.3.9 , installed 2.3.9 > > Adapter "shelly" : 6.0.0 , installed 5.3.2 [Updatable] > > Adapter "simple-api" : 2.7.0 , installed 2.7.0 > > Adapter "socketio" : 4.2.0 , installed 6.1.4 > > Adapter "sonoff" : 2.5.1 , installed 2.5.1 > > Adapter "tankerkoenig" : 2.1.1 , installed 2.1.1 > > Adapter "telegram" : 1.13.0 , installed 1.13.0 > > Adapter "tr-064" : 4.2.16 , installed 4.2.16 > > Adapter "trashschedule": 2.0.3 , installed 1.4.3 [Updatable] > > Adapter "tuya" : 3.6.15 , installed 3.6.15 > > Adapter "unifi" : 0.5.10 , installed 0.5.10 > > Adapter "viessmannapi" : 2.0.9 , installed 2.0.9 > > Adapter "vis" : 1.4.15 , installed 1.4.15 > > Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 > > Adapter "vis-hqwidgets": 1.2.0 , installed 1.2.0 > > Adapter "vis-inventwo" : 3.3.1 , installed 3.3.3 > > Adapter "vw-connect" : 0.0.51 , installed 0.0.50 [Updatable] > > Adapter "web" : 4.3.0 , installed 5.2.0 > > Adapter "whatsapp-cmb" : 0.2.2 , installed 0.2.2 > > Adapter "wifilight" : 1.1.4 , installed 1.1.3 [Updatable] > > Adapter "ws" : 1.3.0 , installed 2.1.3 > > Adapter "zehnder-cloud": 0.0.6 , installed 0.0.6 >> spberrypi:/opt/iobroker $ iobroker upgrade admin@5.3.8 This upgrade of "admin" will at least introduce the following changes: ========================================================================== -> 5.3.8: Changed the datapoint history list Added support of swagger adapter -> 5.3.7: Changed the charts rendering -> 5.3.6: Corrected the host selector in "add instance" dialog corrected display of "null" values, e.g. by time/date -> 5.3.5: Corrected the host selector in "add instance" dialog corrected display of "null" values, e.g. by time/date -> 5.3.4: Fix some crash cases reported by Sentry Corrected user tab -> 5.3.3: Implemented the objects coloring depends on other states -> 5.3.2: added Radio Buttons for value2table Corrected many GUI errors ========================================================================== BE CAREFUL: THIS IS A MAJOR UPGRADE, WHICH WILL MOST LIKELY INTRODUCE BREAKING CHANGES! Would you like to upgrade admin from @0.0.0 to @5.3.8 now? [(y)es, (n)o]: y Update admin from @0.0.0 to @5.3.8 NPM version: 8.11.0 Installing iobroker.admin@5.3.8... (System call) host.raspberrypi Cannot install iobroker.admin@5.3.8: 1 -
@thomas-braun said in Admin Adapter wird immer wieder gestoppt:
> iobroker stop > pi@raspberrypi:/opt/iobroker $ iobroker update > > Used repository: Stable (default) > > Adapter "alexa2" : 3.11.2 , installed 3.12.0 > > Adapter "backitup" : 2.4.10 , installed 2.4.9 [Updatable] > > Adapter "cloud" : 4.1.1 , installed 4.1.1 > > Adapter "devices" : 1.0.12 , installed 1.0.10 [Updatable] > > Adapter "discovery" : 3.0.5 , installed 3.0.3 [Updatable] > > Adapter "echarts" : 1.0.12 , installed 1.0.8 [Updatable] > > Adapter "ecovacs-deebot": 1.4.4 , installed 1.4.4 > > Adapter "flot" : 1.11.0 , installed 1.11.0 > > Adapter "ham" : 4.0.2 , installed 5.0.2 > > Adapter "ham-wemo" : 3.0.0 , installed 3.0.0 > > Adapter "history" : 2.2.0 , installed 2.1.2 [Updatable] > > Adapter "hue" : 3.7.0 , installed 3.7.0 > > Adapter "hue-extended" : 2.0.0 , installed 2.0.0 > > Adapter "ical" : 1.13.1 , installed 1.12.1 [Updatable] > > Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 > > Adapter "info" : 1.9.19 , installed 1.9.19 > > Adapter "javascript" : 5.7.0 , installed 5.7.0 > > Controller "js-controller": 4.0.23 , installed 4.0.23 > > Adapter "kecontact" : 1.4.1 , installed 1.4.0 [Updatable] > > Adapter "modbus" : 5.0.4 , installed 5.0.3 [Updatable] > > Adapter "mqtt" : 3.0.6 , installed 3.0.5 [Updatable] > > Adapter "mysensors" : 3.0.0 , installed 3.0.0 > > Adapter "net-tools" : 0.2.0 , installed 0.2.0 > > Adapter "parser" : 1.1.7 , installed 1.1.6 [Updatable] > > Adapter "rpi2" : 1.3.2 , installed 1.3.2 > > Adapter "rssfeed" : 1.0.0 , installed 1.0.0 > > Adapter "scenes" : 2.3.9 , installed 2.3.9 > > Adapter "shelly" : 6.0.0 , installed 5.3.2 [Updatable] > > Adapter "simple-api" : 2.7.0 , installed 2.7.0 > > Adapter "socketio" : 4.2.0 , installed 6.1.4 > > Adapter "sonoff" : 2.5.1 , installed 2.5.1 > > Adapter "tankerkoenig" : 2.1.1 , installed 2.1.1 > > Adapter "telegram" : 1.13.0 , installed 1.13.0 > > Adapter "tr-064" : 4.2.16 , installed 4.2.16 > > Adapter "trashschedule": 2.0.3 , installed 1.4.3 [Updatable] > > Adapter "tuya" : 3.6.15 , installed 3.6.15 > > Adapter "unifi" : 0.5.10 , installed 0.5.10 > > Adapter "viessmannapi" : 2.0.9 , installed 2.0.9 > > Adapter "vis" : 1.4.15 , installed 1.4.15 > > Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 > > Adapter "vis-hqwidgets": 1.2.0 , installed 1.2.0 > > Adapter "vis-inventwo" : 3.3.1 , installed 3.3.3 > > Adapter "vw-connect" : 0.0.51 , installed 0.0.50 [Updatable] > > Adapter "web" : 4.3.0 , installed 5.2.0 > > Adapter "whatsapp-cmb" : 0.2.2 , installed 0.2.2 > > Adapter "wifilight" : 1.1.4 , installed 1.1.3 [Updatable] > > Adapter "ws" : 1.3.0 , installed 2.1.3 > > Adapter "zehnder-cloud": 0.0.6 , installed 0.0.6 >> spberrypi:/opt/iobroker $ iobroker upgrade admin@5.3.8 This upgrade of "admin" will at least introduce the following changes: ========================================================================== -> 5.3.8: Changed the datapoint history list Added support of swagger adapter -> 5.3.7: Changed the charts rendering -> 5.3.6: Corrected the host selector in "add instance" dialog corrected display of "null" values, e.g. by time/date -> 5.3.5: Corrected the host selector in "add instance" dialog corrected display of "null" values, e.g. by time/date -> 5.3.4: Fix some crash cases reported by Sentry Corrected user tab -> 5.3.3: Implemented the objects coloring depends on other states -> 5.3.2: added Radio Buttons for value2table Corrected many GUI errors ========================================================================== BE CAREFUL: THIS IS A MAJOR UPGRADE, WHICH WILL MOST LIKELY INTRODUCE BREAKING CHANGES! Would you like to upgrade admin from @0.0.0 to @5.3.8 now? [(y)es, (n)o]: y Update admin from @0.0.0 to @5.3.8 NPM version: 8.11.0 Installing iobroker.admin@5.3.8... (System call) host.raspberrypi Cannot install iobroker.admin@5.3.8: 1iobroker upgrade all -
iobroker upgrade all@thomas-braun said in Admin Adapter wird immer wieder gestoppt:
iobroker upgrade all
Dann wird bei allen adaptern gefragt, ob ich sie udgraden will. Soll ich dann bei allen mit y bestätigen? Das dauert sicher was....
-
Also mir kommt die ganze Installation schon komisch vor... @Hanni700 ist im "Stable" aber super viele Adapter sind vom "Latest" auch der "ham"... kann mich aber auch mal wieder täuschen
Lehrling seit 1975 !!!
Beitrag geholfen ? dann gerne ein upvote rechts unten im Beitrag klicken ;)
https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge -
@thomas-braun said in Admin Adapter wird immer wieder gestoppt:
iobroker upgrade all
Dann wird bei allen adaptern gefragt, ob ich sie udgraden will. Soll ich dann bei allen mit y bestätigen? Das dauert sicher was....
@hanni700 sagte in Admin Adapter wird immer wieder gestoppt:
Dann wird bei allen adaptern gefragt, ob ich sie udgraden will. Soll ich dann bei allen mit y bestätigen?
Genau das sollst du tun.
Hättest du schon vor dem Wechsel auf nodejs16 / npm8 machen sollen. -
@hanni700 sagte in Admin Adapter wird immer wieder gestoppt:
Dann wird bei allen adaptern gefragt, ob ich sie udgraden will. Soll ich dann bei allen mit y bestätigen?
Genau das sollst du tun.
Hättest du schon vor dem Wechsel auf nodejs16 / npm8 machen sollen. -
@thomas-braun
Das hatte ich vom Webinterface schon versucht, aber irgendwie ging das nicht. Dann mache ich das jetzt und melde mich mit dem Ergebnis....@hanni700 sagte in Admin Adapter wird immer wieder gestoppt:
Das hatte ich vom Webinterface schon versucht, aber irgendwie ging das nicht.
Vermutlich weil da bereits was quer saß. Da knallt man dann aber nicht auch noch eine andere nodejs/npm-Version drauf, um das Chaos dann perfekt zu machen.
-
Also mir kommt die ganze Installation schon komisch vor... @Hanni700 ist im "Stable" aber super viele Adapter sind vom "Latest" auch der "ham"... kann mich aber auch mal wieder täuschen
@djmarc75 sagte in Admin Adapter wird immer wieder gestoppt:
super viele Adapter sind vom "Latest" auch der "ham"... kann mich aber auch mal wieder täuschen
ja!
ich sehe nur ham und die zusammenhängenden mit web, socket und ws
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@djmarc75 sagte in Admin Adapter wird immer wieder gestoppt:
super viele Adapter sind vom "Latest" auch der "ham"... kann mich aber auch mal wieder täuschen
ja!
ich sehe nur ham und die zusammenhängenden mit web, socket und ws
@homoran sagte in Admin Adapter wird immer wieder gestoppt:
ich sehe nur ham und die zusammenhängenden mit web, socket und ws
ok, scheint ja dann damit wohl nix zu tun haben wenn diese Adapter aus dem Latest kommen dürfen - halte mich dann raus...
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden583
Online32.7k
Benutzer82.6k
Themen1.3m
Beiträge