NEWS
-
@badsnoopy667 Leider funktioniert es dann immer noch nicht. Kann es sein das ich noch irgendwie einen Port freischalten muss?
Allerdings sollte hier alles passen.
Kann es an der UnitID liegen? Die muss ja im Modbus-Getter und im Modbus-Client gepflegt werden. Entspricht die UnitID der im RS4851_1 Menu unter Komm.adresse definierten Nummer?
Und eine weitere Frage? Gibt es eine Aussage zur APP? Funktioniert es mit der FusionSolar, mit der SUN2000 oder mit beiden?
Ich konnte bisher nur Einstellungen mit der FusionSolar machen, da ich mit der anderen keine Verbindung hin bekommen habe.@murokey
Ja schau ob noch ob etwas anderes auf den Modbus zugreift.
Ausserdem muss auch die Registernummer stimmen. Die ist bei Huawei nicht immer gleich.
Hier mal meine Einstellungen. Ich habe den SUN2000-8KTL-M0. Der SUN2000-8KTL-M1 hat glaube ich andere Registernummern. Ausserdem hatte ich ich zum testen den Stecker, der zum Smartmeter geht, abgezogen. Keine Ahnung ob das geholfen hat. Aber mit einmal ging es ab da. Nun läuft es auch mit Stecker.
Ich habe keine Ports Freigegeben. NodeRed läuft im Iobroker auf einem Nuc. Nuc hängt im LAN an einer Fritzbox.
Wechselrichter hängt im WLAN.
-
Hallo,
bekomme so halbherzig Daten mit Node-Red raus. Habe mit meinem Spieltrieb parallel dazu den Modbus-Adapter gestartet. Und siehe da, es kommen jetzt auch hier plausible Daten rein. Leider bricht die Verbindung hier nach einem Zyklus wieder abMit Node-Red habe ich das Problem, dass ich vom 2ten WR nur ein paar Daten bekomme. Die aktualsierung der Daten hört mitten drin auf, zwischen den Register 32018 und 32019. Dann kann ich noch ein für mich nichtssagendes Fehlerprotokoll anbieten
-
@murokey
Ja schau ob noch ob etwas anderes auf den Modbus zugreift.
Ausserdem muss auch die Registernummer stimmen. Die ist bei Huawei nicht immer gleich.
Hier mal meine Einstellungen. Ich habe den SUN2000-8KTL-M0. Der SUN2000-8KTL-M1 hat glaube ich andere Registernummern. Ausserdem hatte ich ich zum testen den Stecker, der zum Smartmeter geht, abgezogen. Keine Ahnung ob das geholfen hat. Aber mit einmal ging es ab da. Nun läuft es auch mit Stecker.
Ich habe keine Ports Freigegeben. NodeRed läuft im Iobroker auf einem Nuc. Nuc hängt im LAN an einer Fritzbox.
Wechselrichter hängt im WLAN. @biervoegelhasso Wie kann ich herausfinden welche Unit-Id ich für den Wechselrichter (SUN2000-10KTL-M1) einstellen muss? In deinen beiden Bildern ist ja einmal 2 und einmal 3 konfiguriert.
-
@biervoegelhasso Wie kann ich herausfinden welche Unit-Id ich für den Wechselrichter (SUN2000-10KTL-M1) einstellen muss? In deinen beiden Bildern ist ja einmal 2 und einmal 3 konfiguriert.
@murokey Bei der Unit ID war ich mir auch nie 100% sicher. Mir ist auch nicht aufgefallen das ich in dem Script unterschiedliche IDs vergeben habe. Ich habe das Script nun korrigiert. Meine ID ist die 2. Verändere ich auch nur bei einem Register die ID auf 3 bricht die ganze Verbindung ab. Nur mal als Tipp.
Mit zwei Programmen auf den Bus zuzugreifen ist mist. Das kann nicht funktionieren. -
Hallo,
bekomme so halbherzig Daten mit Node-Red raus. Habe mit meinem Spieltrieb parallel dazu den Modbus-Adapter gestartet. Und siehe da, es kommen jetzt auch hier plausible Daten rein. Leider bricht die Verbindung hier nach einem Zyklus wieder abMit Node-Red habe ich das Problem, dass ich vom 2ten WR nur ein paar Daten bekomme. Die aktualsierung der Daten hört mitten drin auf, zwischen den Register 32018 und 32019. Dann kann ich noch ein für mich nichtssagendes Fehlerprotokoll anbieten
@captainchaos666
Kann es vielleicht sein, dass Dein Abfrageintervall für die Menge an Registern zu kurz ist? Der ließt die ja alle schön nacheinander ein. Vielleicht wird er einfach nicht fertig. Die wenigsten dieser Daten braucht man ja "live". Ich frage nur eine handvoll Daten im 5 Sekunden Takt ab, den Rest 1x pro Minute.
Und ja, die UnitID muss überall stimmen.
In der Übersicht der Modbus Register von Huawei (Version 3) steht:
"Based on the TCP communications host, unit 0 is used by default to access the
directly connected slave node, and other addresses are used to access the
downstream devices of the slave node. The default address of the slave node is 0.
The address is adjustable."
Kann also auch 0 sein, fängt nicht mit 1 an! -
@captainchaos666
Kann es vielleicht sein, dass Dein Abfrageintervall für die Menge an Registern zu kurz ist? Der ließt die ja alle schön nacheinander ein. Vielleicht wird er einfach nicht fertig. Die wenigsten dieser Daten braucht man ja "live". Ich frage nur eine handvoll Daten im 5 Sekunden Takt ab, den Rest 1x pro Minute.
Und ja, die UnitID muss überall stimmen.
In der Übersicht der Modbus Register von Huawei (Version 3) steht:
"Based on the TCP communications host, unit 0 is used by default to access the
directly connected slave node, and other addresses are used to access the
downstream devices of the slave node. The default address of the slave node is 0.
The address is adjustable."
Kann also auch 0 sein, fängt nicht mit 1 an!@badsnoopy667 Ich möchte mich vorab schonmal für die vielen hilfreichen Antworten bedanken. Mittlerweile konnte ich erstmal eine Verbindung herstellen.
Nach Kontakt mit Huawei war das Problem eine veraltete Firmware des Dongles. Nachdem ich den Dongle auf Version SPC127 geupdated habe funktioniert es soweit ich das bis jetzt beurteilen kann.Ich möchte hier meine Erkenntnisse zusammenfassen:
-
Laut Huawei muss der Dongle mindesten Firmwarestand SPC123 haben
-
Für ein Update muss sich mit der FusionSolarApp mit dem Dongle (nicht dem WR) verbunden werden. Das hat bei mir erst funktioniert als ich den Dongle per USB-Ladegerät angesteckt habe, da ich ihn am WR angesteckt nicht im WLAN finden konnte.
Anleitung im Spoiler:
-
Anschließend wie schon oben immer Beschrieben mit der FusionSolarApp auf den WR verbinden und unter Einstellungen -> Kommunikationkonfiguration -> Dongle-Parametereinstellungen Modbus TCP aktivieren und ggf. in den RS485_1 Einstellungen die Komm.adresse anpassen. Diese entspricht später der UnitID in Node-Red.
-
-
@badsnoopy667 Ich möchte mich vorab schonmal für die vielen hilfreichen Antworten bedanken. Mittlerweile konnte ich erstmal eine Verbindung herstellen.
Nach Kontakt mit Huawei war das Problem eine veraltete Firmware des Dongles. Nachdem ich den Dongle auf Version SPC127 geupdated habe funktioniert es soweit ich das bis jetzt beurteilen kann.Ich möchte hier meine Erkenntnisse zusammenfassen:
-
Laut Huawei muss der Dongle mindesten Firmwarestand SPC123 haben
-
Für ein Update muss sich mit der FusionSolarApp mit dem Dongle (nicht dem WR) verbunden werden. Das hat bei mir erst funktioniert als ich den Dongle per USB-Ladegerät angesteckt habe, da ich ihn am WR angesteckt nicht im WLAN finden konnte.
Anleitung im Spoiler:
-
Anschließend wie schon oben immer Beschrieben mit der FusionSolarApp auf den WR verbinden und unter Einstellungen -> Kommunikationkonfiguration -> Dongle-Parametereinstellungen Modbus TCP aktivieren und ggf. in den RS485_1 Einstellungen die Komm.adresse anpassen. Diese entspricht später der UnitID in Node-Red.
@murokey
Ich dachte mit der Firmenware des Dongles weißt du. Das du dich mit dem Dongle nicht verbinden konntest lag bestimmt an einer zu alten Firmenware. Das Problem hatte ich auch. (The SDongle that needs to be upgraded should have firmware version SDongleV100R001C00SPC115 or later, otherwise the upgrade cannot be performed locally.)
Der Huawei Support hat dann per Fernwartung ein Update gemacht. -
-
@murokey
Ich dachte mit der Firmenware des Dongles weißt du. Das du dich mit dem Dongle nicht verbinden konntest lag bestimmt an einer zu alten Firmenware. Das Problem hatte ich auch. (The SDongle that needs to be upgraded should have firmware version SDongleV100R001C00SPC115 or later, otherwise the upgrade cannot be performed locally.)
Der Huawei Support hat dann per Fernwartung ein Update gemacht. -
Arbeitet ihr allgemein mit Node-red als separater Installation oder mir dem Node-Red Adapter des ioBroker?
Ich habe Node-red separat installiert und finde irgendwie keine Möglichkeit wie ich die iobroker in und iobroker out nodes herbekomme.
@murokey ich habe den Adapter installiert. Wusste nicht mal, dass das auch anders geht.
Bisher nutze ich es auch ausschließlich für den Huawei WR. Und dafür funktioniert es einwandfrei. -
So, ich habe neue Infos, der ktl 30-m3 kann anscheinend kein Modbus TCP mit dem Dongle, es soll angeblich ein Firmware update geben irgendwann mal. Na toll.
habt ihr alle hier kleinere Modelle vom ktl m3?gruß
-
So, ich habe neue Infos, der ktl 30-m3 kann anscheinend kein Modbus TCP mit dem Dongle, es soll angeblich ein Firmware update geben irgendwann mal. Na toll.
habt ihr alle hier kleinere Modelle vom ktl m3?gruß
@ple
Also ich habe auch einen KTL30-M3 und es funktioniert mit Node Red.
Dongle Version 123
Wechselrichter Version 111
Die nachfolgenden Versionen hatte ich ausprobiert und dann wieder downgegraded. Ging nicht.
Hier ist der Flow[ { "id": "78bcc7b.07aa038", "type": "tab", "label": "Modbus TCP", "disabled": false, "info": "" }, { "id": "7f192735.7f04d8", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Interne Temperatur", "topic": "0_userdata.0.Huawei.Inverter.Internal_Temperature", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 730, "y": 1300, "wires": [] }, { "id": "b1161bcd.470708", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Input Power", "topic": "0_userdata.0.Huawei.Inverter.Input_Power", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 880, "wires": [] }, { "id": "8b6b24cb.456578", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Peak Active Power of current Day", "topic": "0_userdata.0.Huawei.Inverter.Peak_Active_Power_of_current_Day", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 780, "y": 1060, "wires": [] }, { "id": "b348383d.407648", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Active Power", "topic": "0_userdata.0.Huawei.Inverter.Active_Power", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 1120, "wires": [] }, { "id": "ae33615.ef40da", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Efficiency ", "topic": "0_userdata.0.Huawei.Inverter.Efficiency", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 700, "y": 1240, "wires": [] }, { "id": "fe38cb9c.a4dd68", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Accumulated Energy Yield", "topic": "0_userdata.0.Huawei.Inverter.Accumulated_Energy_Yield", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 750, "y": 1420, "wires": [] }, { "id": "7ae30e4.55869f", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV1 Voltage", "topic": "0_userdata.0.Huawei.Inverter.PV1_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 400, "wires": [] }, { "id": "20f6d52e.26fdfa", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV1 Current", "topic": "0_userdata.0.Huawei.Inverter.PV1_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 460, "wires": [] }, { "id": "e998ba99.a57228", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV2 Voltage", "topic": "0_userdata.0.Huawei.Inverter.PV2_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 520, "wires": [] }, { "id": "b67e39ed.028a78", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV2 Current", "topic": "0_userdata.0.Huawei.Inverter.PV2_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 580, "wires": [] }, { "id": "85c06382.4a9b1", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Grid Frequency", "topic": "0_userdata.0.Huawei.Inverter.Grid_Frequency", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "Grid frequency", "payloadType": "number", "readonly": "true", "stateUnit": "HZ", "stateMin": "0", "stateMax": "60", "x": 720, "y": 1180, "wires": [] }, { "id": "e8afb02b.08e91", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Insulation Resistance", "topic": "0_userdata.0.Huawei.Inverter.Insulation_Resistance", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 740, "y": 1360, "wires": [] }, { "id": "a922a727.2c6088", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Daily Energy Yield", "topic": "0_userdata.0.Huawei.Inverter.Daily_Energy_Yield", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 730, "y": 1480, "wires": [] }, { "id": "e8ec50e.aea08b", "type": "inject", "z": "78bcc7b.07aa038", "name": "10 Sec. Intervall", "props": [ { "p": "payload" }, { "p": "topic", "vt": "str" } ], "repeat": "10", "crontab": "", "once": true, "onceDelay": "0.1", "topic": "", "payload": "", "payloadType": "date", "x": 130, "y": 160, "wires": [ [ "6dddc7c0.2b30f8" ] ] }, { "id": "3996c271.4a964e", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Power Grid Voltage", "topic": "0_userdata.0.Huawei.Inverter.Power_Grid_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 730, "y": 940, "wires": [] }, { "id": "5a3c69ff.c24f98", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Power Grid Current", "topic": "0_userdata.0.Huawei.Inverter.Power_Grid_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 730, "y": 1000, "wires": [] }, { "id": "d5a9a6fb.7c5408", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Model", "topic": "0_userdata.0.Huawei.Inverter.Model", "ack": "true", "autoCreate": "true", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 690, "y": 280, "wires": [] }, { "id": "1f15301e.28c0d", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Model ID", "topic": "0_userdata.0.Huawei.Inverter.Model_ID", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 700, "y": 340, "wires": [] }, { "id": "42b5f1fc.28bc1", "type": "comment", "z": "78bcc7b.07aa038", "name": "Daten Wechselrichter", "info": "", "x": 380, "y": 160, "wires": [] }, { "id": "53a9ec17.8b2fe4", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV3 Voltage", "topic": "0_userdata.0.Huawei.Inverter.PV3_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 640, "wires": [] }, { "id": "802eca.72dcd138", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV3 Current", "topic": "0_userdata.0.Huawei.Inverter.PV3_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 700, "wires": [] }, { "id": "7b71d68b.3df2f8", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV4 Voltage", "topic": "0_userdata.0.Huawei.Inverter.PV4_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 760, "wires": [] }, { "id": "3f92a0c.5da616", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV4 Current", "topic": "0_userdata.0.Huawei.Inverter.PV4_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 820, "wires": [] }, { "id": "cd15434a.e68f1", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32087", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32087", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1300, "wires": [ [ "e5619565.985e28" ], [ "7817613d.a127e" ] ] }, { "id": "287319c6.b373f6", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32064", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32064", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 880, "wires": [ [ "d2927739.83f298" ], [ "3e4a8574.469efa" ] ] }, { "id": "3c914caf.5738e4", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32078", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32078", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1060, "wires": [ [ "f3c37488.7ecae8" ], [ "d9bd6742.505968" ] ] }, { "id": "d9bd6742.505968", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32080", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32080", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1120, "wires": [ [ "748cd6be.711418" ], [ "267382c6.bb1a8e" ] ] }, { "id": "de6e01cf.1babb", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32086", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32086", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1240, "wires": [ [ "d1eac20a.fd546" ], [ "cd15434a.e68f1" ] ] }, { "id": "23a05a60.7a5216", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32106", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32106", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1420, "wires": [ [ "13c902f0.e19bdd" ], [ "1b3aca18.baeaa6" ] ] }, { "id": "b900f2aa.29994", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32016", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32016", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 400, "wires": [ [ "cf006310.a1f2c" ], [ "50d53b31.a543e4" ] ] }, { "id": "50d53b31.a543e4", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32017", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32017", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 460, "wires": [ [ "e6804f64.105de" ], [ "37582474.3167bc" ] ] }, { "id": "37582474.3167bc", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32018", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32018", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 520, "wires": [ [ "92074916.f988e8" ], [ "89b4ae7.006de5" ] ] }, { "id": "89b4ae7.006de5", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32019", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32019", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 580, "wires": [ [ "48b9d754.2bf578" ], [ "80a44a9c.347948" ] ] }, { "id": "267382c6.bb1a8e", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32085", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32085", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1180, "wires": [ [ "635bee76.0254d" ], [ "de6e01cf.1babb" ] ] }, { "id": "7817613d.a127e", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32088", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32088", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1360, "wires": [ [ "f87e60d1.9574e" ], [ "23a05a60.7a5216" ] ] }, { "id": "1b3aca18.baeaa6", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32114", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32114", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1480, "wires": [ [ "2172b185.4b630e" ], [] ] }, { "id": "3e4a8574.469efa", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32066", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32066", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 940, "wires": [ [ "1e1ec634.66e6da" ], [ "bbacbb38.8dacb8" ] ] }, { "id": "bbacbb38.8dacb8", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32072", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32072", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1000, "wires": [ [ "1e28c400.529afc" ], [ "3c914caf.5738e4" ] ] }, { "id": "6dddc7c0.2b30f8", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "30000", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "30000", "quantity": "15", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 280, "wires": [ [ "c5dccba9.887548" ], [ "320bb00e.64185" ] ] }, { "id": "320bb00e.64185", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "30070", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "30070", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 340, "wires": [ [ "23bd63c4.74e6cc" ], [ "b900f2aa.29994" ] ] }, { "id": "80a44a9c.347948", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32020", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32020", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 640, "wires": [ [ "d862e633.a8a088" ], [ "88f0ea06.ee5ab8" ] ] }, { "id": "88f0ea06.ee5ab8", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32021", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32021", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 700, "wires": [ [ "ecc9586f.339e88" ], [ "5345ba59.79f1c4" ] ] }, { "id": "5345ba59.79f1c4", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32022", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32022", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 760, "wires": [ [ "6d68c1b2.8b289" ], [ "29d25680.6cc24a" ] ] }, { "id": "29d25680.6cc24a", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32023", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32023", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 820, "wires": [ [ "2f9bb0fb.4096f" ], [ "287319c6.b373f6" ] ] }, { "id": "d2927739.83f298", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int32be", "name": "Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 880, "wires": [ [ "af79ce87.b753b" ] ] }, { "id": "f3c37488.7ecae8", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int32be", "name": "Rated Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1060, "wires": [ [ "20815958.10bdc6" ] ] }, { "id": "748cd6be.711418", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int32be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1120, "wires": [ [ "24604dc3.b7a1a2" ] ] }, { "id": "d1eac20a.fd546", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Wirkungsgrad", "offset": 0, "length": 1, "offsetbit": 0, "scale": "0.01", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1240, "wires": [ [ "ae33615.ef40da" ] ] }, { "id": "e5619565.985e28", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Temperatur", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1300, "wires": [ [ "6a77e118.4529e" ] ] }, { "id": "13c902f0.e19bdd", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint32be", "name": "Meter Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1420, "wires": [ [ "def025a8.e64258" ] ] }, { "id": "cf006310.a1f2c", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 400, "wires": [ [ "3b19ffb9.1e7f" ] ] }, { "id": "e6804f64.105de", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 460, "wires": [ [ "2e1aa9d1.aa86a6" ] ] }, { "id": "92074916.f988e8", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 520, "wires": [ [ "7f9a982c.10bd38" ] ] }, { "id": "48b9d754.2bf578", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 580, "wires": [ [ "514b795f.c885d8" ] ] }, { "id": "635bee76.0254d", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Grid frequency", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1180, "wires": [ [ "86bd3f2f.22fa2" ] ] }, { "id": "f87e60d1.9574e", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Wirkungsgrad", "offset": 0, "length": 1, "offsetbit": 0, "scale": "0.001", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1360, "wires": [ [ "e8afb02b.08e91" ] ] }, { "id": "2172b185.4b630e", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint32be", "name": "Meter Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1480, "wires": [ [ "a13f1ae4.bda158" ] ] }, { "id": "1e1ec634.66e6da", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Grid Voltage", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 940, "wires": [ [ "76f4925c.0b90bc" ] ] }, { "id": "1e28c400.529afc", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int32be", "name": "Grid current", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1000, "wires": [ [ "3b9634ff.c9e3ac" ] ] }, { "id": "c5dccba9.887548", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "string", "name": "Model", "offset": 0, "length": 15, "offsetbit": 0, "scale": "0.1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 280, "wires": [ [ "d5a9a6fb.7c5408" ] ] }, { "id": "23bd63c4.74e6cc", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Model ID", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 340, "wires": [ [ "1f15301e.28c0d" ] ] }, { "id": "d862e633.a8a088", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 640, "wires": [ [ "4ae79dde.3fcbd4" ] ] }, { "id": "ecc9586f.339e88", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 700, "wires": [ [ "a4a2b892.32cd68" ] ] }, { "id": "6d68c1b2.8b289", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 760, "wires": [ [ "b8f2f270.61bc" ] ] }, { "id": "2f9bb0fb.4096f", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 820, "wires": [ [ "8306cf5f.45806" ] ] }, { "id": "2e1aa9d1.aa86a6", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "3", "x": 550, "y": 460, "wires": [ [ "20f6d52e.26fdfa" ] ] }, { "id": "514b795f.c885d8", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "3", "x": 550, "y": 580, "wires": [ [ "b67e39ed.028a78" ] ] }, { "id": "3b19ffb9.1e7f", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 400, "wires": [ [ "7ae30e4.55869f" ] ] }, { "id": "7f9a982c.10bd38", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 520, "wires": [ [ "e998ba99.a57228" ] ] }, { "id": "3b9634ff.c9e3ac", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "1000", "round": true, "decimals": "3", "x": 550, "y": 1000, "wires": [ [ "5a3c69ff.c24f98" ] ] }, { "id": "def025a8.e64258", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "2", "x": 550, "y": 1420, "wires": [ [ "fe38cb9c.a4dd68" ] ] }, { "id": "a13f1ae4.bda158", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "2", "x": 550, "y": 1480, "wires": [ [ "a922a727.2c6088" ] ] }, { "id": "76f4925c.0b90bc", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 940, "wires": [ [ "3996c271.4a964e" ] ] }, { "id": "86bd3f2f.22fa2", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "2", "x": 550, "y": 1180, "wires": [ [ "85c06382.4a9b1" ] ] }, { "id": "6a77e118.4529e", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "1", "x": 550, "y": 1300, "wires": [ [ "7f192735.7f04d8" ] ] }, { "id": "af79ce87.b753b", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "1", "round": true, "decimals": "0", "x": 550, "y": 880, "wires": [ [ "b1161bcd.470708" ] ] }, { "id": "24604dc3.b7a1a2", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "1", "round": true, "decimals": "0", "x": 550, "y": 1120, "wires": [ [ "b348383d.407648" ] ] }, { "id": "20815958.10bdc6", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "1", "round": true, "decimals": "0", "x": 550, "y": 1060, "wires": [ [ "8b6b24cb.456578" ] ] }, { "id": "a4a2b892.32cd68", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "3", "x": 550, "y": 700, "wires": [ [ "802eca.72dcd138" ] ] }, { "id": "4ae79dde.3fcbd4", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 640, "wires": [ [ "53a9ec17.8b2fe4" ] ] }, { "id": "8306cf5f.45806", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "3", "x": 550, "y": 820, "wires": [ [ "3f92a0c.5da616" ] ] }, { "id": "b8f2f270.61bc", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 760, "wires": [ [ "7b71d68b.3df2f8" ] ] }, { "id": "70220ecd.1ca1e", "type": "modbus-client", "name": "WLAN-FE", "clienttype": "tcp", "bufferCommands": true, "stateLogEnabled": false, "queueLogEnabled": false, "tcpHost": "192.168.0.250", "tcpPort": "502", "tcpType": "TCP-RTU-BUFFERED", "serialPort": "/dev/ttyUSB", "serialType": "RTU-BUFFERD", "serialBaudrate": "9600", "serialDatabits": "8", "serialStopbits": "1", "serialParity": "none", "serialConnectionDelay": "100", "serialAsciiResponseStartDelimiter": "", "unit_id": "1", "commandDelay": "1", "clientTimeout": "60000", "reconnectOnTimeout": true, "reconnectTimeout": "10000", "parallelUnitIdsAllowed": true } ]Kopieren und Importieren dann Wlan-FE anpassen
-
@ple
Also ich habe auch einen KTL30-M3 und es funktioniert mit Node Red.
Dongle Version 123
Wechselrichter Version 111
Die nachfolgenden Versionen hatte ich ausprobiert und dann wieder downgegraded. Ging nicht.
Hier ist der Flow[ { "id": "78bcc7b.07aa038", "type": "tab", "label": "Modbus TCP", "disabled": false, "info": "" }, { "id": "7f192735.7f04d8", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Interne Temperatur", "topic": "0_userdata.0.Huawei.Inverter.Internal_Temperature", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 730, "y": 1300, "wires": [] }, { "id": "b1161bcd.470708", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Input Power", "topic": "0_userdata.0.Huawei.Inverter.Input_Power", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 880, "wires": [] }, { "id": "8b6b24cb.456578", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Peak Active Power of current Day", "topic": "0_userdata.0.Huawei.Inverter.Peak_Active_Power_of_current_Day", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 780, "y": 1060, "wires": [] }, { "id": "b348383d.407648", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Active Power", "topic": "0_userdata.0.Huawei.Inverter.Active_Power", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 1120, "wires": [] }, { "id": "ae33615.ef40da", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Efficiency ", "topic": "0_userdata.0.Huawei.Inverter.Efficiency", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 700, "y": 1240, "wires": [] }, { "id": "fe38cb9c.a4dd68", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Accumulated Energy Yield", "topic": "0_userdata.0.Huawei.Inverter.Accumulated_Energy_Yield", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 750, "y": 1420, "wires": [] }, { "id": "7ae30e4.55869f", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV1 Voltage", "topic": "0_userdata.0.Huawei.Inverter.PV1_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 400, "wires": [] }, { "id": "20f6d52e.26fdfa", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV1 Current", "topic": "0_userdata.0.Huawei.Inverter.PV1_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 460, "wires": [] }, { "id": "e998ba99.a57228", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV2 Voltage", "topic": "0_userdata.0.Huawei.Inverter.PV2_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 520, "wires": [] }, { "id": "b67e39ed.028a78", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV2 Current", "topic": "0_userdata.0.Huawei.Inverter.PV2_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 580, "wires": [] }, { "id": "85c06382.4a9b1", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Grid Frequency", "topic": "0_userdata.0.Huawei.Inverter.Grid_Frequency", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "Grid frequency", "payloadType": "number", "readonly": "true", "stateUnit": "HZ", "stateMin": "0", "stateMax": "60", "x": 720, "y": 1180, "wires": [] }, { "id": "e8afb02b.08e91", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Insulation Resistance", "topic": "0_userdata.0.Huawei.Inverter.Insulation_Resistance", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 740, "y": 1360, "wires": [] }, { "id": "a922a727.2c6088", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Daily Energy Yield", "topic": "0_userdata.0.Huawei.Inverter.Daily_Energy_Yield", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 730, "y": 1480, "wires": [] }, { "id": "e8ec50e.aea08b", "type": "inject", "z": "78bcc7b.07aa038", "name": "10 Sec. Intervall", "props": [ { "p": "payload" }, { "p": "topic", "vt": "str" } ], "repeat": "10", "crontab": "", "once": true, "onceDelay": "0.1", "topic": "", "payload": "", "payloadType": "date", "x": 130, "y": 160, "wires": [ [ "6dddc7c0.2b30f8" ] ] }, { "id": "3996c271.4a964e", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Power Grid Voltage", "topic": "0_userdata.0.Huawei.Inverter.Power_Grid_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 730, "y": 940, "wires": [] }, { "id": "5a3c69ff.c24f98", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Power Grid Current", "topic": "0_userdata.0.Huawei.Inverter.Power_Grid_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 730, "y": 1000, "wires": [] }, { "id": "d5a9a6fb.7c5408", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Model", "topic": "0_userdata.0.Huawei.Inverter.Model", "ack": "true", "autoCreate": "true", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 690, "y": 280, "wires": [] }, { "id": "1f15301e.28c0d", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "Model ID", "topic": "0_userdata.0.Huawei.Inverter.Model_ID", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 700, "y": 340, "wires": [] }, { "id": "42b5f1fc.28bc1", "type": "comment", "z": "78bcc7b.07aa038", "name": "Daten Wechselrichter", "info": "", "x": 380, "y": 160, "wires": [] }, { "id": "53a9ec17.8b2fe4", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV3 Voltage", "topic": "0_userdata.0.Huawei.Inverter.PV3_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 640, "wires": [] }, { "id": "802eca.72dcd138", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV3 Current", "topic": "0_userdata.0.Huawei.Inverter.PV3_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 700, "wires": [] }, { "id": "7b71d68b.3df2f8", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV4 Voltage", "topic": "0_userdata.0.Huawei.Inverter.PV4_Voltage", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 760, "wires": [] }, { "id": "3f92a0c.5da616", "type": "ioBroker out", "z": "78bcc7b.07aa038", "name": "PV4 Current", "topic": "0_userdata.0.Huawei.Inverter.PV4_Current", "ack": "true", "autoCreate": "false", "stateName": "Huawei", "role": "temperature", "payloadType": "number", "readonly": "true", "stateUnit": "°C", "stateMin": "", "stateMax": "", "x": 710, "y": 820, "wires": [] }, { "id": "cd15434a.e68f1", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32087", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32087", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1300, "wires": [ [ "e5619565.985e28" ], [ "7817613d.a127e" ] ] }, { "id": "287319c6.b373f6", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32064", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32064", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 880, "wires": [ [ "d2927739.83f298" ], [ "3e4a8574.469efa" ] ] }, { "id": "3c914caf.5738e4", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32078", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32078", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1060, "wires": [ [ "f3c37488.7ecae8" ], [ "d9bd6742.505968" ] ] }, { "id": "d9bd6742.505968", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32080", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32080", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1120, "wires": [ [ "748cd6be.711418" ], [ "267382c6.bb1a8e" ] ] }, { "id": "de6e01cf.1babb", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32086", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32086", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1240, "wires": [ [ "d1eac20a.fd546" ], [ "cd15434a.e68f1" ] ] }, { "id": "23a05a60.7a5216", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32106", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32106", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1420, "wires": [ [ "13c902f0.e19bdd" ], [ "1b3aca18.baeaa6" ] ] }, { "id": "b900f2aa.29994", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32016", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32016", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 400, "wires": [ [ "cf006310.a1f2c" ], [ "50d53b31.a543e4" ] ] }, { "id": "50d53b31.a543e4", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32017", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32017", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 460, "wires": [ [ "e6804f64.105de" ], [ "37582474.3167bc" ] ] }, { "id": "37582474.3167bc", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32018", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32018", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 520, "wires": [ [ "92074916.f988e8" ], [ "89b4ae7.006de5" ] ] }, { "id": "89b4ae7.006de5", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32019", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32019", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 580, "wires": [ [ "48b9d754.2bf578" ], [ "80a44a9c.347948" ] ] }, { "id": "267382c6.bb1a8e", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32085", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32085", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1180, "wires": [ [ "635bee76.0254d" ], [ "de6e01cf.1babb" ] ] }, { "id": "7817613d.a127e", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32088", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32088", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1360, "wires": [ [ "f87e60d1.9574e" ], [ "23a05a60.7a5216" ] ] }, { "id": "1b3aca18.baeaa6", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32114", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32114", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1480, "wires": [ [ "2172b185.4b630e" ], [] ] }, { "id": "3e4a8574.469efa", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32066", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32066", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 940, "wires": [ [ "1e1ec634.66e6da" ], [ "bbacbb38.8dacb8" ] ] }, { "id": "bbacbb38.8dacb8", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32072", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32072", "quantity": "2", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 1000, "wires": [ [ "1e28c400.529afc" ], [ "3c914caf.5738e4" ] ] }, { "id": "6dddc7c0.2b30f8", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "30000", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "30000", "quantity": "15", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 280, "wires": [ [ "c5dccba9.887548" ], [ "320bb00e.64185" ] ] }, { "id": "320bb00e.64185", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "30070", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "30070", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 340, "wires": [ [ "23bd63c4.74e6cc" ], [ "b900f2aa.29994" ] ] }, { "id": "80a44a9c.347948", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32020", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32020", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 640, "wires": [ [ "d862e633.a8a088" ], [ "88f0ea06.ee5ab8" ] ] }, { "id": "88f0ea06.ee5ab8", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32021", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32021", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 700, "wires": [ [ "ecc9586f.339e88" ], [ "5345ba59.79f1c4" ] ] }, { "id": "5345ba59.79f1c4", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32022", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32022", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 760, "wires": [ [ "6d68c1b2.8b289" ], [ "29d25680.6cc24a" ] ] }, { "id": "29d25680.6cc24a", "type": "modbus-getter", "z": "78bcc7b.07aa038", "name": "32023", "showStatusActivities": false, "showErrors": false, "logIOActivities": false, "unitid": "1", "dataType": "HoldingRegister", "adr": "32023", "quantity": "1", "server": "70220ecd.1ca1e", "useIOFile": false, "ioFile": "", "useIOForPayload": false, "emptyMsgOnFail": false, "keepMsgProperties": false, "x": 210, "y": 820, "wires": [ [ "2f9bb0fb.4096f" ], [ "287319c6.b373f6" ] ] }, { "id": "d2927739.83f298", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int32be", "name": "Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 880, "wires": [ [ "af79ce87.b753b" ] ] }, { "id": "f3c37488.7ecae8", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int32be", "name": "Rated Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1060, "wires": [ [ "20815958.10bdc6" ] ] }, { "id": "748cd6be.711418", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int32be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1120, "wires": [ [ "24604dc3.b7a1a2" ] ] }, { "id": "d1eac20a.fd546", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Wirkungsgrad", "offset": 0, "length": 1, "offsetbit": 0, "scale": "0.01", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1240, "wires": [ [ "ae33615.ef40da" ] ] }, { "id": "e5619565.985e28", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Temperatur", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1300, "wires": [ [ "6a77e118.4529e" ] ] }, { "id": "13c902f0.e19bdd", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint32be", "name": "Meter Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1420, "wires": [ [ "def025a8.e64258" ] ] }, { "id": "cf006310.a1f2c", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 400, "wires": [ [ "3b19ffb9.1e7f" ] ] }, { "id": "e6804f64.105de", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 460, "wires": [ [ "2e1aa9d1.aa86a6" ] ] }, { "id": "92074916.f988e8", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 520, "wires": [ [ "7f9a982c.10bd38" ] ] }, { "id": "48b9d754.2bf578", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 580, "wires": [ [ "514b795f.c885d8" ] ] }, { "id": "635bee76.0254d", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Grid frequency", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1180, "wires": [ [ "86bd3f2f.22fa2" ] ] }, { "id": "f87e60d1.9574e", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Wirkungsgrad", "offset": 0, "length": 1, "offsetbit": 0, "scale": "0.001", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1360, "wires": [ [ "e8afb02b.08e91" ] ] }, { "id": "2172b185.4b630e", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint32be", "name": "Meter Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1480, "wires": [ [ "a13f1ae4.bda158" ] ] }, { "id": "1e1ec634.66e6da", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Grid Voltage", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 940, "wires": [ [ "76f4925c.0b90bc" ] ] }, { "id": "1e28c400.529afc", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int32be", "name": "Grid current", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 1000, "wires": [ [ "3b9634ff.c9e3ac" ] ] }, { "id": "c5dccba9.887548", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "string", "name": "Model", "offset": 0, "length": 15, "offsetbit": 0, "scale": "0.1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 280, "wires": [ [ "d5a9a6fb.7c5408" ] ] }, { "id": "23bd63c4.74e6cc", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "uint16be", "name": "Model ID", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 340, "wires": [ [ "1f15301e.28c0d" ] ] }, { "id": "d862e633.a8a088", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 640, "wires": [ [ "4ae79dde.3fcbd4" ] ] }, { "id": "ecc9586f.339e88", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 700, "wires": [ [ "a4a2b892.32cd68" ] ] }, { "id": "6d68c1b2.8b289", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 760, "wires": [ [ "b8f2f270.61bc" ] ] }, { "id": "2f9bb0fb.4096f", "type": "buffer-parser", "z": "78bcc7b.07aa038", "name": "", "data": "payload", "dataType": "msg", "specification": "spec", "specificationType": "ui", "items": [ { "type": "int16be", "name": "Active Power", "offset": 0, "length": 1, "offsetbit": 0, "scale": "1", "mask": "" } ], "swap1": "", "swap2": "", "swap3": "", "swap1Type": "swap", "swap2Type": "swap", "swap3Type": "swap", "msgProperty": "payload", "msgPropertyType": "str", "resultType": "value", "resultTypeType": "output", "multipleResult": false, "fanOutMultipleResult": false, "setTopic": true, "outputs": 1, "x": 390, "y": 820, "wires": [ [ "8306cf5f.45806" ] ] }, { "id": "2e1aa9d1.aa86a6", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "3", "x": 550, "y": 460, "wires": [ [ "20f6d52e.26fdfa" ] ] }, { "id": "514b795f.c885d8", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "3", "x": 550, "y": 580, "wires": [ [ "b67e39ed.028a78" ] ] }, { "id": "3b19ffb9.1e7f", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 400, "wires": [ [ "7ae30e4.55869f" ] ] }, { "id": "7f9a982c.10bd38", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 520, "wires": [ [ "e998ba99.a57228" ] ] }, { "id": "3b9634ff.c9e3ac", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "1000", "round": true, "decimals": "3", "x": 550, "y": 1000, "wires": [ [ "5a3c69ff.c24f98" ] ] }, { "id": "def025a8.e64258", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "2", "x": 550, "y": 1420, "wires": [ [ "fe38cb9c.a4dd68" ] ] }, { "id": "a13f1ae4.bda158", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "2", "x": 550, "y": 1480, "wires": [ [ "a922a727.2c6088" ] ] }, { "id": "76f4925c.0b90bc", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 940, "wires": [ [ "3996c271.4a964e" ] ] }, { "id": "86bd3f2f.22fa2", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "2", "x": 550, "y": 1180, "wires": [ [ "85c06382.4a9b1" ] ] }, { "id": "6a77e118.4529e", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "1", "x": 550, "y": 1300, "wires": [ [ "7f192735.7f04d8" ] ] }, { "id": "af79ce87.b753b", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "1", "round": true, "decimals": "0", "x": 550, "y": 880, "wires": [ [ "b1161bcd.470708" ] ] }, { "id": "24604dc3.b7a1a2", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "1", "round": true, "decimals": "0", "x": 550, "y": 1120, "wires": [ [ "b348383d.407648" ] ] }, { "id": "20815958.10bdc6", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "1", "round": true, "decimals": "0", "x": 550, "y": 1060, "wires": [ [ "8b6b24cb.456578" ] ] }, { "id": "a4a2b892.32cd68", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "3", "x": 550, "y": 700, "wires": [ [ "802eca.72dcd138" ] ] }, { "id": "4ae79dde.3fcbd4", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 640, "wires": [ [ "53a9ec17.8b2fe4" ] ] }, { "id": "8306cf5f.45806", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "100", "round": true, "decimals": "3", "x": 550, "y": 820, "wires": [ [ "3f92a0c.5da616" ] ] }, { "id": "b8f2f270.61bc", "type": "calculator", "z": "78bcc7b.07aa038", "name": "", "inputMsgField": "payload", "outputMsgField": "payload", "operation": "div", "constant": "10", "round": true, "decimals": "2", "x": 550, "y": 760, "wires": [ [ "7b71d68b.3df2f8" ] ] }, { "id": "70220ecd.1ca1e", "type": "modbus-client", "name": "WLAN-FE", "clienttype": "tcp", "bufferCommands": true, "stateLogEnabled": false, "queueLogEnabled": false, "tcpHost": "192.168.0.250", "tcpPort": "502", "tcpType": "TCP-RTU-BUFFERED", "serialPort": "/dev/ttyUSB", "serialType": "RTU-BUFFERD", "serialBaudrate": "9600", "serialDatabits": "8", "serialStopbits": "1", "serialParity": "none", "serialConnectionDelay": "100", "serialAsciiResponseStartDelimiter": "", "unit_id": "1", "commandDelay": "1", "clientTimeout": "60000", "reconnectOnTimeout": true, "reconnectTimeout": "10000", "parallelUnitIdsAllowed": true } ]Kopieren und Importieren dann Wlan-FE anpassen
-
Achtung: Verbindung mit Modbus Adapter klappt nicht, node-red klappt.
Hier eine Anleitung um den SUN2000 Wechselrichter incl. Batterie und Power Meter per node-red auszulesen und Werte zu schreiben:
1. Wechselrichter korrekt konfigurieren:
Im Wechselrichter muss die Konfiguration per Modbus (TCP) aktiviert sein. Das kann der Installateur direkt erledigen. Alternativ lädt man sich die SUN2000 App auf's Handy und verbindet sich damit über das WLAN des Wechselrichters (also davorstehend im Keller) mit dem WR und stellt das ein. (Unter Kommunikationseinstellungen glaube ich, die Menüs sind ziemlich unübersichtlich mMn.)
Zum Login in die App als Installateur braucht man ein Passwort: 00000a
Eventuell braucht man zum Verbinden auf das WLAN des Wechselrichters auch ein Passwort: Changeme2. Node-Red installieren und Flow importieren:
Man muss im ioBroker node-red installieren. Außerdem muss man in node-red noch drei zusätzliche NPM Module installieren (geht bei den Instanzeinstellungen):
• node-red-contrib-calc
• node-red-contrib-buffer-parser
• node-red-contrib-modbusHat man das erledigt, kann man diesen Flow importieren:
Huawei_SUN2000_node_red_flow_read_write_2023-11.txt
Achtung, weil das hier schon ein paar Mal zu Problemen geführt hat: Man muss die Client-ID in allen Modbus-Nodes korrekt eintragen. Bei mir steht da 2, weil mein Wechselrichter schonmal getauscht wurde. Das muss überall auf den richtigen Wert (meistens 1) geändert werden damit Daten kommen!
Nachdem man den Flow importiert hat muss man ganz rechts im Menü unter "Globale-Konfigurations-Nodes" beim modbus-client noch die IP Adresse vom Wechselrichter und wieder die richtige Client-ID (typischerweise 1) eintragen. (Port ist 502)3. Hinweise:
Dann sollte die Verbindung eigentlich schon funktionieren. Bei mir war dann noch das Problem, das node-red gemeckert hat, dass die Objekte in iobroker nicht existieren in die er schreiben will.
Um das zu fixen habe ich im Flow alle Output-Nodes (die graublauen Boxen rechts) einmal doppeltgeklickt und dort bei "Auto-create --> Create states if not exist" ausgewählt. Dann kann man noch die Einheit und den Typ festlegen und dann werden die States automatisch beim ersten Lesen angelegt. Hierfür ist es erforderlich, dass in den node-red Instanzeinstellungen noch der Hacken bei "Erstellung von Fremd-Objekten zulassen" aktiviert wird.
Zusätzlich habe ich noch den Wert "Readonly --> Object is writeable" gesetzt. K.a. ob das nötig ist, aber ich hatte den Eindruck, dass die Werte sonst nicht korrekt aktualisiert werden.Zum Nachlesen gibt es hier noch die Huawei SUN2000 Modbus Register Übersicht:
Solar Inverter Modbus Interface Definitions V5.pdf (Stand 2023)
Im Flow werden die wichtigsten Größen aber schon abgefragt.4. Modbus-Register schreiben:
Man kann auch Register schreiben! Damit kann man z.B. die Batterie-Entladung auf 0W setzen wenn das eAuto lädt. Damit entlädt sich die Batterie dann nicht unnötig, wenn man das Auto mit Netzstrom lädt im Winter oder Nachts.
Man kann auch TOU (Zeitgesteuertes Laden) aktivieren. Damit kann man wenn man Tibber oder Awattar nutzt zu den günstigen Stunden den Akku aufladen. Um die günstigsten Stunden auszulesen gibt es hier im Forum entsprechende Skripte.4.1 Zeitgesteuertes Laden korrekt konfigurieren und schreiben:
• AC-Laden muss auf 1 stehen (Register 47087). Kann auch mMn permanent auf 1 bleiben.
• Battery Working Mode (Register 47086) kann zwischen 2 (Maximaler Eigenverbrauch) und 5 (TOU, zeitgesteuert Laden) umgestellt werden.
• Man definiert dann in der Huawei FusionSolar App unter Geräte - Dongle - Parametereinstellungen (die 4 Punkte oben rechts) einfach eine Zeit von 0:00 bis 23:59 jeden Tag "laden" (also den ganzen Tag). Dafür muss die Batterie auf TOU (5) gestellt sein.
• Sobald man jetzt per Modbus das Register 47086 von 2 auf 5 umschaltet, fängt die Batterie aus dem Netz an zu laden.
• Maximaler Ladestrom kann über Register 47075 eingestellt werden.
• Stellt man den Working Mode wieder zurück auf 2, hört das Netzladen auf und die Batterie verhält sich wieder "normal".Die nötigen ioBroker Datenpunkte muss man noch anlegen. Also zB. Battery_Max_Charge_Power_SET oder Workingmode_Change.
5. Weiteres
5.1 Mehrere Wechselrichter abfragen
Es gibt noch weitere Möglichkeiten den Flow aufzubauen. Man kann mehrere Adressbereiche auf einmal abfragen, das ist ggf. etwas effizienter. Den Flow dazu habe ich aber nicht getestet:Außerdem enthält der Flow ein Beispiel für die Abfrage mehrerer Wechselrichter in Kaskade. Im Prinzip muss man nur die korrekten IDs pro Wechselrichter eintragen und nicht zu viele Register abfragen, sonst kommen keine Daten mehr. Damit lassen sich auch 3 Wechselrichter (oder ggf. sogar mehr) in einem Flow abfragen.
5.2 Aktuelle Firmware / Modbus Interface Definitions
Hier noch ein Link zu den aktuellen Firmware Versionen:
SUN2000 FirmwareVielen Dank an alle, die den Input geliefert haben!
Ich hoffe es hilf, wenn ich es hier einmal zusammengefasst habe.Hallo,
meine PV mit Huawei WR kommt (hoffentlich) nächste Woche, aber ich habe schon einmal Node Red auf IOBroker aufgesetzt und Deinen Flow (Vielen Dank) importiert. Wie kommt es, dass einige 'IOBroker Out Nodes' im Status 'connected' angezeigt werden, obwohl 0_userdata.0.Huawei nicht existiert?
-
Hallo,
meine PV mit Huawei WR kommt (hoffentlich) nächste Woche, aber ich habe schon einmal Node Red auf IOBroker aufgesetzt und Deinen Flow (Vielen Dank) importiert. Wie kommt es, dass einige 'IOBroker Out Nodes' im Status 'connected' angezeigt werden, obwohl 0_userdata.0.Huawei nicht existiert?@warp-it
Also der Flow ist nicht von mir, sondern hier aus dem Forum. Ich möchte mich nicht mit fremden Federn schmücken.@warp-it said in [HowTo] Huawei SUN2000 WR Modbus mit node-red (read + write):
Wie kommt es, dass einige 'IOBroker Out Nodes' im Status 'connected' angezeigt werden, obwohl 0_userdata.0.Huawei nicht existiert?
Kann es sein, das die IP-Adresse die in der Wlan-Fe angegeben ist bei dir von einem Gerät belegt ist und er dahin connected?
-
@warp-it
Also der Flow ist nicht von mir, sondern hier aus dem Forum. Ich möchte mich nicht mit fremden Federn schmücken.@warp-it said in [HowTo] Huawei SUN2000 WR Modbus mit node-red (read + write):
Wie kommt es, dass einige 'IOBroker Out Nodes' im Status 'connected' angezeigt werden, obwohl 0_userdata.0.Huawei nicht existiert?
Kann es sein, das die IP-Adresse die in der Wlan-Fe angegeben ist bei dir von einem Gerät belegt ist und er dahin connected?
@joeysch said in [HowTo] Huawei SUN2000 WR Modbus mit node-red (read + write):
Kann es sein, das die IP-Adresse die in der Wlan-Fe angegeben ist bei dir von einem Gerät belegt ist und er dahin connected?
Nö, die in WLAN-FE eingetragene IP-Adresse existiert in meinem LAN nicht.
-
Achtung: Verbindung mit Modbus Adapter klappt nicht, node-red klappt.
Hier eine Anleitung um den SUN2000 Wechselrichter incl. Batterie und Power Meter per node-red auszulesen und Werte zu schreiben:
1. Wechselrichter korrekt konfigurieren:
Im Wechselrichter muss die Konfiguration per Modbus (TCP) aktiviert sein. Das kann der Installateur direkt erledigen. Alternativ lädt man sich die SUN2000 App auf's Handy und verbindet sich damit über das WLAN des Wechselrichters (also davorstehend im Keller) mit dem WR und stellt das ein. (Unter Kommunikationseinstellungen glaube ich, die Menüs sind ziemlich unübersichtlich mMn.)
Zum Login in die App als Installateur braucht man ein Passwort: 00000a
Eventuell braucht man zum Verbinden auf das WLAN des Wechselrichters auch ein Passwort: Changeme2. Node-Red installieren und Flow importieren:
Man muss im ioBroker node-red installieren. Außerdem muss man in node-red noch drei zusätzliche NPM Module installieren (geht bei den Instanzeinstellungen):
• node-red-contrib-calc
• node-red-contrib-buffer-parser
• node-red-contrib-modbusHat man das erledigt, kann man diesen Flow importieren:
Huawei_SUN2000_node_red_flow_read_write_2023-11.txt
Achtung, weil das hier schon ein paar Mal zu Problemen geführt hat: Man muss die Client-ID in allen Modbus-Nodes korrekt eintragen. Bei mir steht da 2, weil mein Wechselrichter schonmal getauscht wurde. Das muss überall auf den richtigen Wert (meistens 1) geändert werden damit Daten kommen!
Nachdem man den Flow importiert hat muss man ganz rechts im Menü unter "Globale-Konfigurations-Nodes" beim modbus-client noch die IP Adresse vom Wechselrichter und wieder die richtige Client-ID (typischerweise 1) eintragen. (Port ist 502)3. Hinweise:
Dann sollte die Verbindung eigentlich schon funktionieren. Bei mir war dann noch das Problem, das node-red gemeckert hat, dass die Objekte in iobroker nicht existieren in die er schreiben will.
Um das zu fixen habe ich im Flow alle Output-Nodes (die graublauen Boxen rechts) einmal doppeltgeklickt und dort bei "Auto-create --> Create states if not exist" ausgewählt. Dann kann man noch die Einheit und den Typ festlegen und dann werden die States automatisch beim ersten Lesen angelegt. Hierfür ist es erforderlich, dass in den node-red Instanzeinstellungen noch der Hacken bei "Erstellung von Fremd-Objekten zulassen" aktiviert wird.
Zusätzlich habe ich noch den Wert "Readonly --> Object is writeable" gesetzt. K.a. ob das nötig ist, aber ich hatte den Eindruck, dass die Werte sonst nicht korrekt aktualisiert werden.Zum Nachlesen gibt es hier noch die Huawei SUN2000 Modbus Register Übersicht:
Solar Inverter Modbus Interface Definitions V5.pdf (Stand 2023)
Im Flow werden die wichtigsten Größen aber schon abgefragt.4. Modbus-Register schreiben:
Man kann auch Register schreiben! Damit kann man z.B. die Batterie-Entladung auf 0W setzen wenn das eAuto lädt. Damit entlädt sich die Batterie dann nicht unnötig, wenn man das Auto mit Netzstrom lädt im Winter oder Nachts.
Man kann auch TOU (Zeitgesteuertes Laden) aktivieren. Damit kann man wenn man Tibber oder Awattar nutzt zu den günstigen Stunden den Akku aufladen. Um die günstigsten Stunden auszulesen gibt es hier im Forum entsprechende Skripte.4.1 Zeitgesteuertes Laden korrekt konfigurieren und schreiben:
• AC-Laden muss auf 1 stehen (Register 47087). Kann auch mMn permanent auf 1 bleiben.
• Battery Working Mode (Register 47086) kann zwischen 2 (Maximaler Eigenverbrauch) und 5 (TOU, zeitgesteuert Laden) umgestellt werden.
• Man definiert dann in der Huawei FusionSolar App unter Geräte - Dongle - Parametereinstellungen (die 4 Punkte oben rechts) einfach eine Zeit von 0:00 bis 23:59 jeden Tag "laden" (also den ganzen Tag). Dafür muss die Batterie auf TOU (5) gestellt sein.
• Sobald man jetzt per Modbus das Register 47086 von 2 auf 5 umschaltet, fängt die Batterie aus dem Netz an zu laden.
• Maximaler Ladestrom kann über Register 47075 eingestellt werden.
• Stellt man den Working Mode wieder zurück auf 2, hört das Netzladen auf und die Batterie verhält sich wieder "normal".Die nötigen ioBroker Datenpunkte muss man noch anlegen. Also zB. Battery_Max_Charge_Power_SET oder Workingmode_Change.
5. Weiteres
5.1 Mehrere Wechselrichter abfragen
Es gibt noch weitere Möglichkeiten den Flow aufzubauen. Man kann mehrere Adressbereiche auf einmal abfragen, das ist ggf. etwas effizienter. Den Flow dazu habe ich aber nicht getestet:Außerdem enthält der Flow ein Beispiel für die Abfrage mehrerer Wechselrichter in Kaskade. Im Prinzip muss man nur die korrekten IDs pro Wechselrichter eintragen und nicht zu viele Register abfragen, sonst kommen keine Daten mehr. Damit lassen sich auch 3 Wechselrichter (oder ggf. sogar mehr) in einem Flow abfragen.
5.2 Aktuelle Firmware / Modbus Interface Definitions
Hier noch ein Link zu den aktuellen Firmware Versionen:
SUN2000 FirmwareVielen Dank an alle, die den Input geliefert haben!
Ich hoffe es hilf, wenn ich es hier einmal zusammengefasst habe.Danke für die Top Anleitung, mit dem Modbus Adapter bin ich verzweifelt. Jetzt nach etwas Recherche bin ich auf deine Anleitung über NodeRed gestoßen und siehe da.... es geht auf anhieb.
Da ich vorher noch nie mit NodeRed was zu tun hatte bin ich entsprechend wackelig auf den Beinen damit. Was ich nicht umgesetzt bekomme sind die Alarme bzw. der Status des Wechselrichters.
Dort sind ja als Datentyp "Bitfield16" hinterlegt (z.b. Adresse 32000). So bekomme ich das aktuell in einen State geschrieben: [[{"bits":[0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0],"bit0":0,"bit1":1,"bit2":1,"bit3":0,"bit4":0,"bit5":0,"bit6":0,"bit7":0,"bit8":0,"bit9":0,"bit10":0,"bit11":0,"bit12":0,"bit13":0,"bit14":0,"bit15":0}]]
Jetzt wäre mein Ansatz es mit Blockly/JS zu zerlegen um an die Statis zu kommen. Aber gibt es ggf. mit NodeRed eine fluffigere Möglichkeit die einzelnen Bits direkt auszuwerten und nur wenn der Bitwert 1 ist auch ein State aktualisiert wird?
-
Guten Tag zusammen,
ich konnte nun nach viel hin und her mich auf meinen Huawei WR einloggen als Installateur. Ich habe auf dem Dongle die Version 125 und beim WR 141. ich bekomme aber leider keine Verbindung hin die Einstellungen ehen für mich alle identisch aus. Welche IP Adresse muss denn eingetragen werden ? Die ich auf meinem Router für den Dongle sehe oder die IP Adresse die mir im Portal angezeigt wird ?
Ich weiß nicht mehr so recht weiterPS. und wo finde ich den die MBus Einstellungen ? Ich finde die weder beim WR noch beim Dongle
PS bei mir war es die Version vom Dongle, für alle die noch Probleme haben, mit der Version 127 hat es geklappt.
Gruß
-
Moin,
leider habe ich immernoch 2 Probleme, das erste wäre das ich vom Meter den Datenpunkt: 0_userdata.0.Huawei.Meter.Active_Power nicht geschrieben bekomme, die anderen 4 wie Freqeuenz und Spannung sind da. Jemand eine Idee ?
Und es steht noch folgendes im Log für viele Datenpunkte: State value to set for "0_userdata.0.Huawei.Meter.Active_Power" has to be stringified but received type "number"Muss ich den Typ für jeden Datenpunkt ändern ?
Gruß
-
Moin,
leider habe ich immernoch 2 Probleme, das erste wäre das ich vom Meter den Datenpunkt: 0_userdata.0.Huawei.Meter.Active_Power nicht geschrieben bekomme, die anderen 4 wie Freqeuenz und Spannung sind da. Jemand eine Idee ?
Und es steht noch folgendes im Log für viele Datenpunkte: State value to set for "0_userdata.0.Huawei.Meter.Active_Power" has to be stringified but received type "number"Muss ich den Typ für jeden Datenpunkt ändern ?
Gruß
@serial13579 said in [HowTo] Huawei SUN2000 WR Modbus mit node-red (read + write):
das erste wäre das ich vom Meter den Datenpunkt: 0_userdata.0.Huawei.Meter.Active_Power nicht geschrieben bekomme
Du schreibst "geschrieben bekomme". Ich denke, Du meinst "lesen", oder? Schreiben kann man diesen Datenpunkt im WR nicht. Kommt denn irgend eine Art von Fehlermeldung? Hast Du mal versucht NUR diesen einen Datenpunkt zu lesen und alle anderen zu deaktivieren? Vielleicht stimmt was nicht mit der Abfragehäufigkeit.
Support us
725
Online32.5k
Users81.7k
Topics1.3m
Posts