[GELÖST] Admin 5.2.3 update ERROR

Newpicsel

@sigi234

OK danke blick da kaum noch durch.

Muss ich beim downgrade irgendwas beachten (löschen) oder ähnliches?

Danke für deine Hilfe

haselchen

@newpicsel

Anleitung und Infos stehen auf der Hauptseite oben unter „News“

Thomas Braun

@newpicsel

Anleitung ist in meiner Signatur verlinkt.

Newpicsel

@thomas-braun

Hat soweit geklappt...

which nodejs node npm && nodejs -v && node -v && npm -v && sudo apt update && sudo apt update && apt policy nodejs

bringt:

/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v14.18.2
v14.18.2
6.14.15
nodejs:
  Installiert:           14.18.2-deb-1nodesource1
  Installationskandidat: 14.18.2-deb-1nodesource1
  Versionstabelle:
 *** 14.18.2-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u1 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

admin 5.2.3 update bringt weiterhin obigen fehler:
ERROR: Process exited with code 1

$ iobroker upgrade admin@5.2.3

Update admin from @5.2.1 to @5.2.3

/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupInstall.js:207 if (arr.rows[id].value.common.enabled && hostname === arr.rows[id].value.common.host) { ^TypeError: Cannot read property 'enabled' of undefined at Immediate.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupInstall.js:207:55) at processImmediate (internal/timers.js:466:21)

ERROR: Process exited with code 1

Was nun???

Jan1

@newpicsel
Hast mal neu gestartet und den Fixer laufen laufen lassen nach dem Du Node wieder gerichtet hast?

Thomas Braun

@newpicsel

Wenn der Fixer nicht zum Erfolg führt:

iobroker stop
cd /opt/iobroker
sudo -H -u iobroker npm install iobroker.js-controller
iobroker restart

Newpicsel

@thomas-braun

Den Fixer hatte ich eh zur sicherheit einmal gestartet, aber leider hilft selbst

iobroker stop
cd /opt/iobroker
sudo -H -u iobroker npm install iobroker.js-controller
iobroker restart

nicht

Thomas Braun

@newpicsel

Das heißt? Rückmeldungen geheim? Dann lass ich da lieber die Finger von...

Glasfaser

@newpicsel sagte in Admin 5.2.3 update ERROR: Process exited with code 1:

Update admin from @5.2.1 to @5.2.3

Zeige mal

iobroker version

Newpicsel

@thomas-braun

sorry

npm WARN read-shrinkwrap This version of npm is compatible with lockfileVersion@1, but package-lock.json was generated for lockfileVersion@2. I'll try to do my best with it!

> iobroker.js-controller@3.3.22 preinstall /opt/iobroker/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.14.15

> epoll@2.0.10 install /opt/iobroker/node_modules/epoll
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/epoll/build“ wird betreten
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make: Verzeichnis „/opt/iobroker/node_modules/epoll/build“ wird verlassen

> node-dht-sensor@0.4.3 install /opt/iobroker/node_modules/node-dht-sensor
> node-gyp configure


> canvas@2.8.0 install /opt/iobroker/node_modules/canvas
> node-pre-gyp install --fallback-to-build

node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.8.0/canvas-v2.8.0-node-v83-linux-glibc-arm.tar.gz
node-pre-gyp WARN Pre-built binaries not installable for canvas@2.8.0 and node@14.18.2 (node-v83 ABI, glibc) (falling back to source compile with node-gyp)
node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.8.0/canvas-v2.8.0-node-v83-linux-glibc-arm.tar.gz
make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten
  SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node
  COPY Release/canvas-postbuild.node
  CXX(target) Release/obj.target/canvas/src/backend/Backend.o
  CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o
  CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o
../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’:
../src/bmp/BMPParser.cc:186:16: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~~~~~~~~~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/bmp/BMPParser.cc:201:27: warning: comparison of integer expressions of different signedness: ‘uint32_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare]
   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
  CXX(target) Release/obj.target/canvas/src/Backends.o
  CXX(target) Release/obj.target/canvas/src/Canvas.o
  CXX(target) Release/obj.target/canvas/src/CanvasGradient.o
  CXX(target) Release/obj.target/canvas/src/CanvasPattern.o
  CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o
  CXX(target) Release/obj.target/canvas/src/closure.o
  CXX(target) Release/obj.target/canvas/src/color.o
  CXX(target) Release/obj.target/canvas/src/Image.o
  CXX(target) Release/obj.target/canvas/src/ImageData.o
  CXX(target) Release/obj.target/canvas/src/init.o
  CXX(target) Release/obj.target/canvas/src/register_font.o
  SOLINK_MODULE(target) Release/obj.target/canvas.node
  COPY Release/canvas.node
make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen

> @serialport/bindings@9.2.5 install /opt/iobroker/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

prebuild-install WARN install No prebuilt binaries found (target=14.18.2 runtime=node arch=arm libc= platform=linux)
make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird betreten
  CXX(target) Release/obj.target/bindings/src/serialport.o
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
 uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                     ^~~~~~~~~~~~~~~

../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
  uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                     ^~~~~~~~~~~~~~

../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
  uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                     ^~~~~~~~~~~~~~

../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:271:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:316:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:366:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
 eue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                     ^~~~~~~~~~~~~~~~~~~~

../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:412:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
  uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                     ^~~~~~~~~~~~~~

../src/serialport.cpp: At global scope:
../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:58,
                 from ../src/./serialport.h:13,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.2/include/node/node.h:787:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/14.18.2/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:179:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:179:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:89:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:89:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/poller.o
  CXX(target) Release/obj.target/bindings/src/serialport_linux.o
  SOLINK_MODULE(target) Release/obj.target/bindings.node
  COPY Release/bindings.node
make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird verlassen

> sharp@0.28.1 install /opt/iobroker/node_modules/sharp
> (node install/libvips && node install/dll-copy && prebuild-install) || (node-gyp rebuild && node install/dll-copy)

sharp: Using cached /home/iobroker/.npm/_libvips/libvips-8.10.6-linux-armv7.tar.br
prebuild-install WARN install No prebuilt binaries found (target=3 runtime=napi arch=arm libc= platform=linux)
make: Verzeichnis „/opt/iobroker/node_modules/sharp/build“ wird betreten
  CC(target) Release/obj.target/nothing/../node-addon-api/nothing.o
  AR(target) Release/obj.target/../node-addon-api/nothing.a
  COPY Release/nothing.a
  TOUCH Release/obj.target/libvips-cpp.stamp
  CXX(target) Release/obj.target/sharp/src/common.o
  CXX(target) Release/obj.target/sharp/src/metadata.o
  CXX(target) Release/obj.target/sharp/src/stats.o
  CXX(target) Release/obj.target/sharp/src/operations.o
  CXX(target) Release/obj.target/sharp/src/pipeline.o
  CXX(target) Release/obj.target/sharp/src/utilities.o
  CXX(target) Release/obj.target/sharp/src/sharp.o
  SOLINK_MODULE(target) Release/obj.target/sharp.node
  COPY Release/sharp.node
make: Verzeichnis „/opt/iobroker/node_modules/sharp/build“ wird verlassen

> iobroker.vis@1.4.5 install /opt/iobroker/node_modules/iobroker.vis
> node main.js --install


> iobroker.vis-google-fonts@0.1.0 install /opt/iobroker/node_modules/iobroker.vis-google-fonts
> node main.js --install


> iobroker.js-controller@3.3.22 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

object _design/custom updated
object _design/system updated
3 file(s) successfully synchronized with ioBroker storage.
Please DO NOT copy files manually into ioBroker storage directories!

The following notifications happened during sync:
- Ignoring Directory "vis-plumb.admin" because officially not created as meta object. Please remove directory!
- Added 3 Files in Directory "vis.0"


> esbuild@0.11.23 postinstall /opt/iobroker/node_modules/esbuild
> node install.js


> node-dht-sensor@0.4.3 postinstall /opt/iobroker/node_modules/node-dht-sensor
> node-gyp build

make: Verzeichnis „/opt/iobroker/node_modules/node-dht-sensor/build“ wird betreten
  CC(target) Release/obj.target/nothing/node_modules/node-addon-api/src/nothing.o
  AR(target) Release/obj.target/node_modules/node-addon-api/src/nothing.a
  COPY Release/nothing.a
  CC(target) Release/obj.target/node_dht_sensor/src/bcm2835/bcm2835.o
  CXX(target) Release/obj.target/node_dht_sensor/src/node-dht-sensor.o
  CXX(target) Release/obj.target/node_dht_sensor/src/dht-sensor.o
  CXX(target) Release/obj.target/node_dht_sensor/src/util.o
  SOLINK_MODULE(target) Release/obj.target/node_dht_sensor.node
  COPY Release/node_dht_sensor.node
make: Verzeichnis „/opt/iobroker/node_modules/node-dht-sensor/build“ wird verlassen

> iobroker.javascript@5.2.13 postinstall /opt/iobroker/node_modules/iobroker.javascript
> node ./install/installTypings.js

Installing NodeJS typings...
latest @types: 17, installed node: 14
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.2 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

+ iobroker.js-controller@3.3.22
added 4 packages from 7 contributors, removed 98 packages and updated 583 packages in 741.711s

76 packages are looking for funding
  run `npm fund` for details

Glasfaser

@thomas-braun sagte in Admin 5.2.3 update ERROR: Process exited with code 1:

Rückmeldungen geheim?

Die sind die ganze Zeit gekürzt

Newpicsel

@glasfaser

was genau fehlt an infos? ich halte nichts bewusst zurück!

Newpicsel

@glasfaser said in Admin 5.2.3 update ERROR: Process exited with code 1:

iobroker version

3.3.22

Glasfaser · 3.3.22

@newpicsel

Doch ... die komplette Ein/Ausgabe von der Konsole

Newpicsel

@glasfaser

verstehe ich nicht!
hab doch bis auf den downgrade und eben den "sudo -H -u iobroker npm install iobroker.js-controller" befehl noch nichts gemacht was ich hätte posten können?
Ich bin kein profi und hab kein plan welche infos ich geben soll oder muss, wenn man jedoch fragt, gebe ich mein bestes diese informationen zu beschaffen

Glasfaser

@newpicsel sagte in Admin 5.2.3 update ERROR: Process exited with code 1:

@glasfaser
verstehe ich nicht!

Beispiel:

Hier sieht mal wunderbar , welcher User , wo steht er mit dem Befehl usw.

pi@chet:~ $ iobroker update -u && iobroker upgrade all
Used repository: live-beta
hash changed or no sources cached => force download of new sources
Cannot download json from https://raw.githubusercontent.com/MeisterTR/ioBroker.kress/master/io-package.json. Error: 404: Not Found
[Wed Dec 29 2021 07:13:30 GMT+0100 (Central European Standard Time)] Following packages cannot be read: kress
update done
All adapters are up to date
pi@chet:~ $

Newpicsel

@glasfaser said in Admin 5.2.3 update ERROR: Process exited with code 1:

@newpicsel sagte in Admin 5.2.3 update ERROR: Process exited with code 1:

@glasfaser
verstehe ich nicht!

Beispiel:

Hier sieht mal wunderbar , welcher User , wo steht er mit dem Befehl usw.

pi@chet:~ $ iobroker update -u && iobroker upgrade all
Used repository: live-beta
hash changed or no sources cached => force download of new sources
Cannot download json from https://raw.githubusercontent.com/MeisterTR/ioBroker.kress/master/io-package.json. Error: 404: Not Found
[Wed Dec 29 2021 07:13:30 GMT+0100 (Central European Standard Time)] Following packages cannot be read: kress
update done
All adapters are up to date
pi@chet:~ $

Soetwas habe ich nicht in die konsole eingegeben oder zurückbekommen, wie hätte ich das posten sollen?
Wie gesagt, bin kein Profi und halte definitiv keine infos bewusst zurück, darauf mit "doch" zu antworten sagt viel über dein charakter aus.
Mir ist klar, dass es nervig sein kann den leuten hier jede info aus der nase ziehen zu müssen, denke aber wohl die meisten werden einfach nicht wissen welche infos benötigt werden oder wie sie an diese kommen, zumindest nicht ungefragt.

ps: Zur info, das admin update führe ich direkt in iobroker aus und den obigen fehler bekomme ich auch exakt so dort zurück.

iobroker update -u && iobroker upgrade all

Used repository: default
hash changed or no sources cached => force download of new sources
update done
Adapter    "admin"         : 5.2.3    , installed 5.2.1 [Updateable]

This upgrade of "admin" will introduce the following changes:
==========================================================================
-> 5.2.3:
Fixed error in `AutocompleteSendTo`
Fixed error in charts

-> 5.2.2:
Changed the minimal required js-controller version to 3.3.22
Used web-socket library 8 (no node 10 support anymore)
==========================================================================

Would you like to upgrade admin from @5.2.1 to @5.2.3 now? [(y)es, (n)o]: y
Update admin from @5.2.1 to @5.2.3
/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupInstall.js:207
                        if (arr.rows[id].value.common.enabled && hostname === arr.rows[id].value.common.host) {
                                                      ^

TypeError: Cannot read property 'enabled' of undefined
    at Immediate.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupInstall.js:207:55)
    at processImmediate (internal/timers.js:466:21)

Thomas Braun

@newpicsel sagte in Admin 5.2.3 update ERROR: Process exited with code 1:

ps: Zur info, das admin update führe ich direkt in iobroker aus

Nutze die Konsole.

Homoran

@newpicsel sagte in Admin 5.2.3 update ERROR: Process exited with code 1:

darauf mit "doch" zu antworten sagt viel über dein charakter aus.

ruhig Brauner!
Überdenke deine Ausdrucksweise!

Glasfaser

@newpicsel sagte in Admin 5.2.3 update ERROR: Process exited with code 1:

darauf mit "doch" zu antworten sagt viel über dein charakter aus.

Das denke ich mal nicht , aber wenn du das meinst .

Wir hier im Forum/Thread könne dir nur helfen , wenn du uns alle Informationen zeigst die wir hier brauchen .

Deshalb habe ich dir auch ein Beispiel dazu gezeigt , wie es sein soll.

Also :

@thomas-braun sagte in Admin 5.2.3 update ERROR: Process exited with code 1:
@newpicsel sagte in Admin 5.2.3 update ERROR: Process exited with code 1:

ps: Zur info, das admin update führe ich direkt in iobroker aus

Nutze die Konsole.

Community Forum

NEWS

[GELÖST] Admin 5.2.3 update ERROR

Support us

569

32.9k

83.0k

1.3m